>>> virtual console started for client 00.15.17.6C.35.54 <<<
gathering previous messages...
1 of 1 pages preallocated
SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=4, Nodes=1
hpet clockevent registered
Calibrating delay using timer specific routine.. 3992.65 BogoMIPS (lpj=1996329)
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
using mwait in idle threads.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
ACPI: Core revision 20070126
CPU0: Intel(R) Xeon(R) CPU E5335 @ 2.00GHz stepping 0b
Booting processor 1/1 ip 4000
CPU 1 irqstacks, hard=c07ba000 soft=c079a000
Initializing CPU#1
Calibrating delay using timer specific routine.. 3990.01 BogoMIPS (lpj=1995006)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel(R) Xeon(R) CPU E5335 @ 2.00GHz stepping 0b
Booting processor 2/2 ip 4000
CPU 2 irqstacks, hard=c07bb000 soft=c079b000
Initializing CPU#2
Calibrating delay using timer specific routine.. 3990.02 BogoMIPS (lpj=1995011)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 2
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#2.
CPU2: Intel(R) Xeon(R) CPU E5335 @ 2.00GHz stepping 0b
Booting processor 3/3 ip 4000
CPU 3 irqstacks, hard=c07bc000 soft=c079c000
Initializing CPU#3
Calibrating delay using timer specific routine.. 3990.02 BogoMIPS (lpj=1995012)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 3
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#3.
CPU3: Intel(R) Xeon(R) CPU E5335 @ 2.00GHz stepping 0b
Total of 4 processors activated (15962.71 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
checking TSC synchronization [CPU#0 -> CPU#2]: passed.
checking TSC synchronization [CPU#0 -> CPU#3]: passed.
Brought up 4 CPUs
sizeof(vma)=84 bytes
sizeof(page)=32 bytes
sizeof(inode)=340 bytes
sizeof(dentry)=132 bytes
sizeof(ext3inode)=492 bytes
sizeof(buffer_head)=56 bytes
sizeof(skbuff)=176 bytes
sizeof(task_struct)=3728 bytes
CPU0 attaching sched-domain:
domain 0: span 00000003
groups: 00000001 00000002
domain 1: span 0000000f
groups: 00000003 0000000c
CPU1 attaching sched-domain:
domain 0: span 00000003
groups: 00000002 00000001
domain 1: span 0000000f
groups: 00000003 0000000c
CPU2 attaching sched-domain:
domain 0: span 0000000c
groups: 00000004 00000008
domain 1: span 0000000f
groups: 0000000c 00000003
CPU3 attaching sched-domain:
domain 0: span 0000000c
groups: 00000008 00000004
domain 1: span 0000000f
groups: 0000000c 00000003
net_namespace: 548 bytes
Booting paravirtualized kernel on bare hardware
Time: 8:16:05 Date: 08/26/08
NET: Registered protocol family 16
No dock devices found.
ACPI: bus type pci registered
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:0c:00.0: PXH quirk detected; SHPC device MSI disabled
pci 0000:0c:00.2: PXH quirk detected; SHPC device MSI disabled
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE5._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXPC._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXPC.PXHA._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXPC.PXHB._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE7._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE.PCIE._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE.PCIW._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE.PCIW.PCIO._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE.PCIW.PCIO.PCIA._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE.PCIW.PCIP._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE.PCIW.PCIQ._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 5 7 *10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7 10 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs *5 7 10 11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 10 *11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 5 7 *10 11)
ACPI: PCI Interrupt Link [LNKF] (IRQs 5 7 10 *11)
ACPI: PCI Interrupt Link [LNKG] (IRQs *5 7 10 11)
ACPI: PCI Interrupt Link [LNKH] (IRQs 5 7 10 *11)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 64-bit timers, 14318180 Hz
ACPI: RTC can wake from S4
system 00:01: iomem range 0xa0000000-0xafffffff could not be reserved
system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
system 00:01: iomem range 0xffc00000-0xffffffff could not be reserved
system 00:01: iomem range 0xfec00000-0xfecfffff has been reserved
system 00:01: iomem range 0xfee00000-0xfeefffff has been reserved
system 00:01: iomem range 0xfe600000-0xfe6fffff has been reserved
system 00:01: iomem range 0xfe000000-0xfe01ffff has been reserved
system 00:06: ioport range 0x500-0x53f has been reserved
system 00:06: ioport range 0x400-0x47f has been reserved
system 00:06: ioport range 0x800-0x87f has been reserved
system 00:06: ioport range 0xca2-0xca7 has been reserved
system 00:06: ioport range 0xca8-0xcaf has been reserved
system 00:06: ioport range 0x161-0x161 has been reserved
system 00:06: ioport range 0x162-0x162 has been reserved
PCI: Bridge: 0000:03:00.0
IO window: disabled.
MEM window: 0xb8900000-0xb89fffff
PREFETCH window: 0x00000000b8b00000-0x00000000b8bfffff
PCI: Bridge: 0000:03:00.2
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:02:00.0
IO window: disabled.
MEM window: 0xb8900000-0xb89fffff
PREFETCH window: 0x00000000b8b00000-0x00000000b8bfffff
PCI: Bridge: 0000:02:01.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:02:02.0
IO window: 2000-2fff
MEM window: 0xb8000000-0xb88fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:01:00.0
IO window: 2000-2fff
MEM window: 0xb8000000-0xb89fffff
PREFETCH window: 0x00000000b8b00000-0x00000000b8bfffff
PCI: Bridge: 0000:01:00.3
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:02.0
IO window: 2000-2fff
MEM window: 0xb8000000-0xb8afffff
PREFETCH window: 0x00000000b8b00000-0x00000000b8bfffff
PCI: Bridge: 0000:00:03.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:04.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:05.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:0c:00.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:0c:00.2
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:06.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:07.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1e.0
IO window: 1000-1fff
MEM window: 0xb8c00000-0xb8cfffff
PREFETCH window: 0x00000000b0000000-0x00000000b7ffffff
ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:02.0 to 64
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:01:00.0 to 64
ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:02:00.0 to 64
PCI: Setting latency timer of device 0000:03:00.0 to 64
PCI: Setting latency timer of device 0000:03:00.2 to 64
ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:02:01.0 to 64
ACPI: PCI Interrupt 0000:02:02.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:02:02.0 to 64
PCI: Setting latency timer of device 0000:01:00.3 to 64
ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:03.0 to 64
ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:04.0 to 64
ACPI: PCI Interrupt 0000:00:05.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:05.0 to 64
ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:06.0 to 64
PCI: Setting latency timer of device 0000:0c:00.0 to 64
PCI: Setting latency timer of device 0000:0c:00.2 to 64
ACPI: PCI Interrupt 0000:00:07.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:07.0 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
checking if image is initramfs...<7>Switched to high resolution mode on CPU 1
Switched to high resolution mode on CPU 2
Switched to high resolution mode on CPU 3
Switched to high resolution mode on CPU 0
it is
Freeing initrd memory: 18001k freed
apm: BIOS not found.
audit: initializing netlink socket (disabled)
type=2000 audit(1219738566.046:1): initialized
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:10:0c.0: Boot video device
PCI: Setting latency timer of device 0000:00:02.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:02.0:pcie00]
Allocate Port Service[0000:00:02.0:pcie01]
PCI: Setting latency timer of device 0000:00:03.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:03.0:pcie00]
Allocate Port Service[0000:00:03.0:pcie01]
PCI: Setting latency timer of device 0000:00:04.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:04.0:pcie00]
Allocate Port Service[0000:00:04.0:pcie01]
PCI: Setting latency timer of device 0000:00:05.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:05.0:pcie00]
Allocate Port Service[0000:00:05.0:pcie01]
PCI: Setting latency timer of device 0000:00:06.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:06.0:pcie00]
Allocate Port Service[0000:00:06.0:pcie01]
PCI: Setting latency timer of device 0000:00:07.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:07.0:pcie00]
Allocate Port Service[0000:00:07.0:pcie01]
PCI: Setting latency timer of device 0000:01:00.0 to 64
Allocate Port Service[0000:01:00.0:pcie11]
PCI: Setting latency timer of device 0000:02:00.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:02:00.0:pcie21]
Allocate Port Service[0000:02:00.0:pcie22]
PCI: Setting latency timer of device 0000:02:01.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:02:01.0:pcie21]
PCI: Setting latency timer of device 0000:02:02.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:02:02.0:pcie21]
AER service couldn't init device 0000:00:02.0:pcie01 - no _OSC support
AER service couldn't init device 0000:00:03.0:pcie01 - no _OSC support
AER service couldn't init device 0000:00:04.0:pcie01 - no _OSC support
AER service couldn't init device 0000:00:05.0:pcie01 - no _OSC support
AER service couldn't init device 0000:00:06.0:pcie01 - no _OSC support
AER service couldn't init device 0000:00:07.0:pcie01 - no _OSC support
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: ACPI0007:00 is registered as cooling_device0
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: ACPI0007:01 is registered as cooling_device1
ACPI: Processor [CPU1] (supports 8 throttling states)
ACPI: ACPI0007:02 is registered as cooling_device2
ACPI: Processor [CPU2] (supports 8 throttling states)
ACPI: ACPI0007:03 is registered as cooling_device3
ACPI: Processor [CPU3] (supports 8 throttling states)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
hpet_resources: 0xfed00000 is busy
Non-volatile memory driver v1.2
Linux agpgart interface v0.103
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
brd: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input0
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI No-Shortcut mode
registered taskstats version 1
Magic number: 4:532:271
Freeing unused kernel memory: 284k freed
Write protecting the kernel read-only data: 908k
monitor_save_dmesg
mount_sys
mount_pts
get_arch
adjust_arch
ifconfig_loopback
load_my_modules
insmod: cannot insert `/lib/modules/2.6.25-14.fc9.i686/kernel/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.ko': No such device (-1): No such device
start_udevd
bin dev dev.tar.gz etc init lib linuxrc my_modules old_root proc root sbin sys tmp usr var Starting kernel event manager...
...done.
bin dev dev.tar.gz etc init lib linuxrc my_modules old_root proc root sbin sys tmp usr var Loading hardware drivers...
...done.
start_hotplug
bin dev dev.tar.gz etc init lib linuxrc my_modules old_root proc root sbin sys tmp usr var Starting hotplug subsystem...
variableize_kernel_append_parameters
read_kernel_append_parameters
read_local_cfg
Checking for floppy diskette.
YOU MAY SEE SOME "wrong magic" ERRORS HERE, AND THAT IS NORMAL.
No floppy diskette in drive.
read_kernel_append_parameters
start_network
IP Address not set with pre-boot settings.
sleep 0: This is to give your switch (if you're using one) time to
recognize your ethernet card before we try the network.
Tip: You can use <ctrl>+<c> to pass the time (pun intended).
dhclient
Internet Software Consortium DHCP Client 2.0pl5
Copyright 1995, 1996, 1997, 1998, 1999 The Internet Software Consortium.
All rights reserved.
Please contribute if you find this software useful.
For info, please visit http://www.isc.org/dhcp-contrib.html
sit0: unknown hardware address type 776
modprobe: module af_packet not found.
modprobe: failed to load module af_packet
sit0: unknown hardware address type 776
Listening on LPF/sit0/<null>
Sending on LPF/sit0/<null>
Listening on LPF/eth1/00:15:17:6c:35:55
Sending on LPF/eth1/00:15:17:6c:35:55
Listening on LPF/eth0/00:15:17:6c:35:54
Sending on LPF/eth0/00:15:17:6c:35:54
Listening on LPF/lo/<null>
Sending on LPF/lo/<null>
Sending on Socket/fallback/fallback-net
DHCPDISCOVER on sit0 to 255.255.255.255 port 67 interval 4
DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 6
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 8
DHCPDISCOVER on lo to 255.255.255.255 port 67 interval 8
DHCPDISCOVER on sit0 to 255.255.255.255 port 67 interval 5
DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 10
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 11
DHCPDISCOVER on lo to 255.255.255.255 port 67 interval 15
DHCPDISCOVER on sit0 to 255.255.255.255 port 67 interval 6
DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 16
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 15
DHCPDISCOVER on sit0 to 255.255.255.255 port 67 interval 15
DHCPDISCOVER on lo to 255.255.255.255 port 67 interval 17
DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 17
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 13
DHCPDISCOVER on sit0 to 255.255.255.255 port 67 interval 11
DHCPDISCOVER on lo to 255.255.255.255 port 67 interval 17
DHCPDISCOVER on sit0 to 255.255.255.255 port 67 interval 12
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 7
DHCPOFFER from 10.100.66.127
DHCPREQUEST on eth0 to 255.255.255.255 port 67
DHCPACK from 10.100.66.127
Using option-140 as IMAGESERVER: 10.100.66.127
bound to 10.100.66.128 -- renewal in 43200 seconds.
Overriding any DHCP settings with pre-boot settings from kernel append
parameters.
read_kernel_append_parameters
ping_test
Pinging your SystemImager server to ensure we have network connectivity.
PING ATTEMPT 1:
PING 10.100.66.127 (10.100.66.127): 56 data bytes
84 bytes from 10.100.66.127: icmp_seq=0 ttl=64 time=1.6 ms
--- 10.100.66.127 ping statistics ---
1 packets transmitted, 1 packets received, 0% packet loss
round-trip min/avg/max = 1.6/1.6/1.6 ms
We have connectivity to your SystemImager server!
Monitoring initialized.
start_syslogd
get_boel_binaries_tarball
rsync -av 10.100.66.127::boot/i386/standard/boel_binaries.tar.gz /tmp/boel_binaries
receiving file list ... done
boel_binaries.tar.gz
sent 58 bytes received 6771898 bytes 4514637.33 bytes/sec
total size is 6770931 speedup is 1.00
tmpfs_watcher
get_scripts_directory
rsync -a 10.100.66.127::scripts/ /scripts/
autodetect_hardware_and_load_modules
Detecting hardware using pci-automod (this may take a long time):
sd_mod ide-disk uhci-hcd ehci-hcd i5000_edac i2c-i801 iTCO_wdt megaraid_sas e1000e ata_piix
Loading sd_mod...
done!
Loading ide-disk...
not needed or already loaded.
Loading uhci-hcd...
not needed or already loaded.
Loading ehci-hcd...
not needed or already loaded.
Loading i5000_edac...
done!
Loading i2c-i801...
not needed or already loaded.
Loading iTCO_wdt...
done!
Loading megaraid_sas...
done!
Loading e1000e...
done!
Loading ata_piix...
done!
get_hostname_by_hosts_file
Hosts file exists...
Searching for this machine's hostname in /scripts/hosts by IP: 10.100.66.128
This hosts name is: fcimagetest
run_pre_install_scripts
>>> 99all.harmless_example_script
I live in /var/lib/systemimager/scripts/pre-install.
choose_autoinstall_script
Using autoinstall script: /scripts/fcimagetest.sh
write_variables
run_autoinstall_script
>>> /scripts/fcimagetest.sh
get_arch
Partitioning /dev/sda...
Old partition table for /dev/sda:
Error: Could not stat device /dev/sda - No such file or directory.
dd if=/dev/zero of=/dev/sda bs=512 count=1 || shellout
1+0 records in
1+0 records out
blockdev --rereadpt /dev/sda
BLKRRPART: Inappropriate ioctl for device
parted -s -- /dev/sda mklabel msdos || shellout
Creating partition /dev/sda1.
parted -s -- /dev/sda mkpart primary 0 196 || shellout
Error: The location 196 is outside of the device /dev/sda.
Killing off running processes.
write_variables
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
This is the SystemImager autoinstall system
Your autoinstall has failed. You can use the shell prompt to try and see
what happened. You may be able to use the <Shift>+<Page Up> keys to scroll
back and see the text that has passed off the top of the screen. You can use
<alt>+<f2>, <f3>, or <f4> to work at an alternate shell prompt and preserve
your messages on the main screen, which is on <alt>+<f1>. Then go back and
re-read the documentation to see if your problem is described there.
You have read the documentation, right? :-)
If you absolutely cannot figure it out, visit the SystemImager support page
at http://systemimager.org. There you can search the email list archives,
ask your question on IRC, or even join a mailing list to ask your question.
There's a good chance someone else has experienced this very same issue and
can help answer your question. If you find the answer and it's not in the
documentation, or if you identify a bug, please submit a bug report at the
SystemImager support page.
Have fun! http://systemimager.org
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Installation failed!! Stopping report task.