rendered paste bodyINIT detected from ---- {APICID = 00 NODEID = 00 COREID = 00} ---
Issuing SOFT_RESET...
coreboot-2.0.0_s2882_Fallback Wed Aug 20 15:59:25 EDT 2008 starting...
01 nodes initialized.
SBLink=00
NC node|link=00
Ram1.00
Ram1.01
Ram2.00
Ram2.01
Ram3
Initializing memory: done
Ram4
v_esp=000cffc4
testx = 5a5a5a5a
Copying data from cache to RAM -- switching to use RAM as stack... Done
testx = 5a5a5a5a
Disabling cache as ram now
Clearing initial memory region: Done
Copying coreboot to RAM.
src=fffe9000
dst=00004000
linxbios_ram.nrv2b length = 0000e4c8
linxbios_ram.bin length = 00028d5c
Jumping to coreboot.
coreboot-2.0.0_s2882_Fallback Wed Aug 20 15:59:25 EDT 2008 booting...
Enumerating buses...
APIC_CLUSTER: 0 enabled
PCI_DOMAIN: 0000 enabled
PCI: 00:18.3 siblings=1
CPU: APIC: 00 enabled
CPU: APIC: 01 enabled
PCI: pci_scan_bus for bus 00
PCI: 00:18.0 [1022/1100] enabled
PCI: 00:18.1 [1022/1101] enabled
PCI: 00:18.2 [1022/1102] enabled
PCI: 00:18.3 [1022/1103] enabled
PCI: 01:00.0 [1022/7450] enabled
PCI: 01:01.0 [1022/7450] enabled next_unitid: 0003
PCI: 01:00.0 [1022/7460] enabled
PCI: 01:03.0 [1022/7460] enabled next_unitid: 0007
PCI: pci_scan_bus for bus 01
PCI: 01:01.0 [1022/7450] enabled
PCI: 01:01.1 [1022/7451] enabled
PCI: 01:02.0 [1022/7450] enabled
PCI: 01:02.1 [1022/7451] enabled
PCI: 01:03.0 [1022/7460] enabled
PCI: 01:04.0 [1022/7468] enabled
PCI: 01:04.1 [1022/7469] enabled
PCI: 01:04.2 [1022/746a] enabled
PCI: 01:04.3 [1022/746b] enabled
PCI: pci_scan_bus for bus 02
Disabling static device: PCI: 02:06.0
Disabling static device: PCI: 02:06.1
PCI: 02:09.0 [14e4/1648] enabled
PCI: 02:09.1 [14e4/1648] enabled
PCI: pci_scan_bus returning with max=002
PCI: 02: 100MHz PCI-X
PCI: pci_scan_bus for bus 03
PCI: 03:03.0 [1095/3124] enabled
PCI: pci_scan_bus returning with max=003
PCI: 03: Conventional PCI
PCI: pci_scan_bus for bus 04
PCI: 04:00.0 [1022/7464] enabled
PCI: 04:00.1 [1022/7464] enabled
PCI: 04:05.0 [1095/3114] enabled
PCI: 04:06.0 [1002/4752] enabled
PCI: 04:08.0 [8086/1229] enabled
PCI: pci_scan_bus returning with max=004
PNP: 002e.0 enabled
PNP: 002e.1 disabled
PNP: 002e.2 enabled
PNP: 002e.3 disabled
PNP: 002e.5 enabled
PNP: 002e.6 disabled
PNP: 002e.7 disabled
PNP: 002e.8 disabled
PNP: 002e.9 disabled
PNP: 002e.a disabled
PNP: 002e.b enabled
PCI: pci_scan_bus returning with max=004
PCI: pci_scan_bus returning with max=004
done
Allocating resources...
Reading resources...
PCI: 01:01.0 1c <- [0x00fffff000 - 0x00ffffefff] size 0x00000000 gran 0x0c bus 02 io
PCI: 01:01.0 24 <- [0xfffffffffff00000 - 0xffffffffffefffff] size 0x00000000 gran 0x14 bus 02 prefmem
PCI: 01:02.0 24 <- [0xfffffffffff00000 - 0xffffffffffefffff] size 0x00000000 gran 0x14 bus 03 prefmem
PCI: 01:03.0 24 <- [0x00fff00000 - 0x00ffefffff] size 0x00000000 gran 0x14 bus 04 prefmem
Done reading resources.
Allocating VGA resource PCI: 04:06.0
Setting PCI_BRIDGE_CTL_VGA for bridge PCI: 01:03.0
Setting PCI_BRIDGE_CTL_VGA for bridge PCI: 00:18.0
Setting PCI_BRIDGE_CTL_VGA for bridge PCI_DOMAIN: 0000
Setting PCI_BRIDGE_CTL_VGA for bridge Root Device
Setting resources...
VGA: PCI: 00:18.0 (aka node 0) link 0 has VGA device
PCI: 00:18.0 1b8 <- [0x00fd400000 - 0x00fd3fffff] size 0x00000000 gran 0x14 prefmem <node 0 link 0>
PCI: 00:18.0 1c0 <- [0x0000001000 - 0x0000003fff] size 0x00003000 gran 0x0c io <node 0 link 0>
PCI: 00:18.0 1b0 <- [0x00fc000000 - 0x00fd3fffff] size 0x01400000 gran 0x14 mem <node 0 link 0>
PCI: 01:01.0 20 <- [0x00fd100000 - 0x00fd1fffff] size 0x00100000 gran 0x14 bus 02 mem
PCI: 02:09.0 10 <- [0x00fd100000 - 0x00fd10ffff] size 0x00010000 gran 0x10 mem64
PCI: 02:09.0 18 <- [0x00fd110000 - 0x00fd11ffff] size 0x00010000 gran 0x10 mem64
PCI: 02:09.1 10 <- [0x00fd120000 - 0x00fd12ffff] size 0x00010000 gran 0x10 mem64
PCI: 02:09.1 18 <- [0x00fd130000 - 0x00fd13ffff] size 0x00010000 gran 0x10 mem64
PCI: 01:01.1 10 <- [0x00fd300000 - 0x00fd300fff] size 0x00001000 gran 0x0c mem64
PCI: 01:02.0 1c <- [0x0000001000 - 0x0000001fff] size 0x00001000 gran 0x0c bus 03 io
PCI: 01:02.0 20 <- [0x00fd200000 - 0x00fd2fffff] size 0x00100000 gran 0x14 bus 03 mem
PCI: 03:03.0 10 <- [0x00fd288000 - 0x00fd28807f] size 0x00000080 gran 0x07 mem64
PCI: 03:03.0 18 <- [0x00fd280000 - 0x00fd287fff] size 0x00008000 gran 0x0f mem64
PCI: 03:03.0 20 <- [0x0000001000 - 0x000000100f] size 0x00000010 gran 0x04 io
PCI: 03:03.0 30 <- [0x00fd200000 - 0x00fd27ffff] size 0x00080000 gran 0x13 romem
PCI: 01:02.1 10 <- [0x00fd301000 - 0x00fd301fff] size 0x00001000 gran 0x0c mem64
PCI: 01:03.0 1c <- [0x0000002000 - 0x0000002fff] size 0x00001000 gran 0x0c bus 04 io
PCI: 01:03.0 20 <- [0x00fc000000 - 0x00fd0fffff] size 0x01100000 gran 0x14 bus 04 mem
PCI: 04:00.0 10 <- [0x00fd020000 - 0x00fd020fff] size 0x00001000 gran 0x0c mem
PCI: 04:00.1 10 <- [0x00fd021000 - 0x00fd021fff] size 0x00001000 gran 0x0c mem
PCI: 04:05.0 10 <- [0x0000002450 - 0x0000002457] size 0x00000008 gran 0x03 io
PCI: 04:05.0 14 <- [0x0000002470 - 0x0000002473] size 0x00000004 gran 0x02 io
PCI: 04:05.0 18 <- [0x0000002460 - 0x0000002467] size 0x00000008 gran 0x03 io
PCI: 04:05.0 1c <- [0x0000002480 - 0x0000002483] size 0x00000004 gran 0x02 io
PCI: 04:05.0 20 <- [0x0000002440 - 0x000000244f] size 0x00000010 gran 0x04 io
PCI: 04:05.0 24 <- [0x00fd024000 - 0x00fd0243ff] size 0x00000400 gran 0x0a mem
PCI: 04:06.0 10 <- [0x00fc000000 - 0x00fcffffff] size 0x01000000 gran 0x18 mem
PCI: 04:06.0 14 <- [0x0000002000 - 0x00000020ff] size 0x00000100 gran 0x08 io
PCI: 04:06.0 18 <- [0x00fd022000 - 0x00fd022fff] size 0x00001000 gran 0x0c mem
PCI: 04:06.0 30 <- [0x00fff00000 - 0x00fff1ffff] size 0x00020000 gran 0x11 romem
PCI: 04:08.0 10 <- [0x00fd023000 - 0x00fd023fff] size 0x00001000 gran 0x0c mem
PCI: 04:08.0 14 <- [0x0000002400 - 0x000000243f] size 0x00000040 gran 0x06 io
PCI: 04:08.0 18 <- [0x00fd000000 - 0x00fd01ffff] size 0x00020000 gran 0x11 mem
PNP: 002e.0 60 <- [0x00000003f0 - 0x00000003f7] size 0x00000008 gran 0x03 io
PNP: 002e.0 70 <- [0x0000000006 - 0x0000000006] size 0x00000001 gran 0x00 irq
PNP: 002e.0 74 <- [0x0000000002 - 0x0000000002] size 0x00000001 gran 0x00 drq
PNP: 002e.2 60 <- [0x00000003f8 - 0x00000003ff] size 0x00000008 gran 0x03 io
PNP: 002e.2 70 <- [0x0000000004 - 0x0000000004] size 0x00000001 gran 0x00 irq
PNP: 002e.5 60 <- [0x0000000060 - 0x0000000060] size 0x00000001 gran 0x00 io
PNP: 002e.5 62 <- [0x0000000064 - 0x0000000064] size 0x00000001 gran 0x00 io
PNP: 002e.5 70 <- [0x0000000001 - 0x0000000001] size 0x00000001 gran 0x00 irq
PNP: 002e.5 72 <- [0x000000000c - 0x000000000c] size 0x00000001 gran 0x00 irq
PNP: 002e.b 60 <- [0x0000000290 - 0x0000000297] size 0x00000008 gran 0x03 io
PNP: 002e.b 70 <- [0x0000000005 - 0x0000000005] size 0x00000001 gran 0x00 irq
PCI: 01:04.1 20 <- [0x0000003420 - 0x000000342f] size 0x00000010 gran 0x04 io
PCI: 01:04.2 10 <- [0x0000003400 - 0x000000341f] size 0x00000020 gran 0x05 io
PCI: 01:04.3 58 <- [0x0000003000 - 0x00000030ff] size 0x00000100 gran 0x08 io
PCI: 00:18.3 94 <- [0x00f8000000 - 0x00fbffffff] size 0x04000000 gran 0x1a mem <gart>
Done setting resources.
Done allocating resources.
Enabling resources...
PCI: 00:18.0 cmd <- 00
PCI: 01:01.0 bridge ctrl <- 0003
PCI: 01:01.0 cmd <- 06
PCI: 02:09.0 subsystem <- 10f1/2882
PCI: 02:09.0 cmd <- 02
PCI: 02:09.1 subsystem <- 10f1/2882
PCI: 02:09.1 cmd <- 02
PCI: 01:01.1 subsystem <- 10f1/2882
PCI: 01:01.1 cmd <- 06
PCI: 01:02.0 bridge ctrl <- 0003
PCI: 01:02.0 cmd <- 07
PCI: 03:03.0 cmd <- 83
PCI: 01:02.1 subsystem <- 10f1/2882
PCI: 01:02.1 cmd <- 06
PCI: 01:03.0 bridge ctrl <- 000b
PCI: 01:03.0 cmd <- 07
PCI: 04:00.0 subsystem <- 10f1/2882
PCI: 04:00.0 cmd <- 02
PCI: 04:00.1 subsystem <- 10f1/2882
PCI: 04:00.1 cmd <- 02
PCI: 04:05.0 subsystem <- 10f1/2882
PCI: 04:05.0 cmd <- 03
PCI: 04:06.0 subsystem <- 10f1/2882
PCI: 04:06.0 cmd <- 83
PCI: 04:08.0 subsystem <- 10f1/2882
PCI: 04:08.0 cmd <- 03
PCI: 01:04.0 subsystem <- 10f1/2882
PCI: 01:04.0 cmd <- 0f
w83627hf hwm smbus enabled
PCI: 01:04.1 subsystem <- 10f1/2882
PCI: 01:04.1 cmd <- 01
PCI: 01:04.2 subsystem <- 10f1/2882
PCI: 01:04.2 cmd <- 01
PCI: 01:04.3 subsystem <- 10f1/2882
PCI: 01:04.3 cmd <- 01
PCI: 00:18.1 subsystem <- 10f1/2882
PCI: 00:18.1 cmd <- 00
PCI: 00:18.2 subsystem <- 10f1/2882
PCI: 00:18.2 cmd <- 00
PCI: 00:18.3 cmd <- 00
done.
Initializing devices...
Root Device init
APIC_CLUSTER: 0 init
Initializing CPU #0
CPU: vendor AMD device 20f12
CPU: family 0f, model 21, stepping 02
Enabling cache
Setting fixed MTRRs(0-88) type: UC
Setting fixed MTRRs(0-16) Type: WB, RdMEM, WrMEM
Setting fixed MTRRs(24-88) Type: WB, RdMEM, WrMEM
DONE fixed MTRRs
Setting variable MTRR 0, base: 0MB, range: 4096MB, type WB
Setting variable MTRR 1, base: 4096MB, range: 1024MB, type WB
Setting variable MTRR 2, base: 3072MB, range: 1024MB, type UC
DONE variable MTRRs
Clear out the extra MTRR's
MTRR check
Fixed MTRRs : Enabled
Variable MTRRs: Enabled
microcode: equivalent rev id = 0x0210, current patch id = 0x00000000
microcode: rev id does not match this patch.
microcode: Not updated! Fix microcode_updates[]
microcode: rev id does not match this patch.
microcode: Not updated! Fix microcode_updates[]
microcode: patch id to apply = 0x0000004d
microcode: updated to patch id = 0x0000004d success
CPU model Dual Core AMD Opteron(tm) Processor 265
Setting up local apic... apic_id: 0x00 done.
Clearing memory 2048K - 5242880K: -----------------------------------------------++++++++++++++++ done
CPU #0 Initialized
CPU 0x01 would not start!
CPU 0x01 did not initialize!
All AP CPUs stopped
PCI: 00:18.0 init
PCI: 01:01.0 init
PCI: 02:09.0 init
PCI: 02:09.1 init
PCI: 01:02.0 init
PCI: 01:03.0 init
PCI: 04:05.0 init
PCI: 04:06.0 init
rom address for PCI: 04:06.0 = fff00000
copying VGA ROM Image from 0xfff00000 to 0xc0000, 0x9000 bytes
entering emulator
halt_sys: file /data/personal/data/2008/projects/coreboot/buildrom9/buildrom-devel/work/coreboot/svn/src/devices/emulator/x86emu/ops.c, line 4387
PCI: 04:08.0 init
PCI: 01:04.0 init
amd8111: ioapic bsp_apicid = 00
RTC Init
enabling HPET @0xfed00000
PNP: 002e.0 init
PNP: 002e.2 init
PNP: 002e.5 init
Keyboard init...
PNP: 002e.b init
PCI: 01:04.1 init
IDE1 IDE0 PCI: 01:04.3 init
set power on after power fail
PCI: 00:18.1 init
PCI: 00:18.2 init
PCI: 00:18.3 init
NB: Function 3 Misc Control.. done.
PCI: 03:03.0 init
rom address for PCI: 03:03.0 = fd200000
copying non-VGA ROM Image from 0xfd200000 to 0xd0000, 0xf000 bytes
entering emulator
halt_sys: file /data/personal/data/2008/projects/coreboot/buildrom9/buildrom-devel/work/coreboot/svn/src/devices/emulator/x86emu/ops.c, line 183
Devices initialized
Writing IRQ routing tables to 0xf0000...
setting Onboard AMD Southbridge
Assigning IRQ 10 to 1:4.2
Readback = 10
setting Onboard AMD USB
Assigning IRQ 10 to 4:0.0
Readback = 10
Assigning IRQ 10 to 4:0.1
Readback = 10
setting Onboard ATI Display Adapter
Assigning IRQ 11 to 4:6.0
Readback = 11
setting Slot 1
Assigning IRQ 5 to 3:3.0
Readback = 5
setting Slot 2
setting Slot 3
setting Slot 4
setting Slot 5
setting Onboard SI Serial ATA
Assigning IRQ 10 to 4:5.0
Readback = 10
setting Onboard Intel NIC
Assigning IRQ 11 to 4:8.0
Readback = 11
setting Onboard Adaptec SCSI
setting Onboard Broadcom NIC
Assigning IRQ 5 to 2:9.0
Readback = 5
Assigning IRQ 9 to 2:9.1
Readback = 9
done.
Wrote the mp table end at: 00000020 - 00000200
Moving GDT to 0x500...ok
Adjust low_table_end from 0x00000530 to 0x00001000
Adjust rom_table_end from 0x000f0400 to 0x00100000
Wrote coreboot table at: 00000530 - 00000ea4 checksum 9ff1
Welcome to elfboot, the open sourced starter.
January 2002, Eric Biederman.
Version 1.3
rom_stream: 0xfff09000 - 0xfffe8fff
Uncompressing to RAM 0x01000000 olen = 0x001ea4b4 done.
Found ELF candidate at offset 0
header_offset is 0
Try to load at offset 0x0
Dropping non PT_LOAD segment
New segment addr 0x10000 size 0x54fc offset 0x144 filesize 0x1278
(cleaned up) New segment addr 0x10000 size 0x54fc offset 0x144 filesize 0x1278
New segment addr 0x20000 size 0x1070 offset 0x13bc filesize 0x0
(cleaned up) New segment addr 0x20000 size 0x1070 offset 0x13bc filesize 0x0
New segment addr 0x100000 size 0x15a2a4 offset 0x13bc filesize 0x15a2a4
(cleaned up) New segment addr 0x100000 size 0x15a2a4 offset 0x13bc filesize 0x15a2a4
New segment addr 0x25b000 size 0x73000 offset 0x15b660 filesize 0x50854
(cleaned up) New segment addr 0x25b000 size 0x73000 offset 0x15b660 filesize 0x50854
New segment addr 0x800000 size 0x3e600 offset 0x1abeb4 filesize 0x3e600
(cleaned up) New segment addr 0x800000 size 0x3e600 offset 0x1abeb4 filesize 0x3e600
Loading Segment: addr: 0x00000000bff98000 memsz: 0x00000000000054fc filesz: 0x0000000000001278
Clearing Segment: addr: 0x00000000bff99278 memsz: 0x0000000000004284
Loading Segment: addr: 0x00000000bffa8000 memsz: 0x0000000000001070 filesz: 0x0000000000000000
Clearing Segment: addr: 0x00000000bffa8000 memsz: 0x0000000000001070
Loading Segment: addr: 0x0000000000100000 memsz: 0x000000000015a2a4 filesz: 0x000000000015a2a4
Loading Segment: addr: 0x000000000025b000 memsz: 0x0000000000073000 filesz: 0x0000000000050854
Clearing Segment: addr: 0x00000000002ab854 memsz: 0x00000000000227ac
Loading Segment: addr: 0x0000000000800000 memsz: 0x000000000003e600 filesz: 0x000000000003e600
Jumping to boot code at 0x10000
Unknown firmware type: coreboot
Firmware type: LinuxBIOS
mount: Mounting usbfs on /proc/bus/usb failed: Unknown error 2
Press enter to start the busybox shell (pausing 5 seconds).
Trying to boot from hdd.
__ __ _____ _ ___
\ \/ /___ _ __ |___ / / | / _ \
\ // _ \ '_ \ |_ \ | || | | |
/ \ __/ | | | ___) || || |_| |
/_/\_\___|_| |_| |____(_)_(_)___/
http://www.cl.cam.ac.uk/netos/xen
University of Cambridge Computer Laboratory
Xen version 3.1.0 (root@[unknown]) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) Fri Nov 9 12:11:30 EST 2007
Latest ChangeSet: unavailable
(XEN) Command line: /hdd///xen-3.1.0.gz com1=115200,8n1 cdb=com1
(XEN) 0000000000000000 - 0000000000001000 (reserved)
(XEN) 0000000000001000 - 00000000000a0000 (usable)
(XEN) 0000000000100000 - 00000000c0000000 (usable)
(XEN) 0000000100000000 - 0000000140000000 (usable)
(XEN) System RAM: 4095MB (4193916kB)
(XEN) ACPI: Unable to locate RSDP
(XEN) Xen heap: 13MB (14128kB)
(XEN) Domain heap initialised: DMA width 32 bits
(XEN) Processor #0 15:1 APIC version 16
(XEN) Enabling APIC mode: Flat. Using 3 I/O APICs
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Detected 1792.239 MHz processor.
(XEN) CPU0: AMD Dual Core AMD Opteron(tm) Processor 265 stepping 02
(XEN) Mapping cpu 0 to node 255
(XEN) Total of 1 processors activated.
(XEN) ENABLING IO-APIC IRQs
(XEN) -> Using new ACK method
(XEN) Platform timer is 1.193MHz PIT
(XEN) Brought up 1 CPUs
(XEN) *** LOADING DOMAIN 0 ***
(XEN) Xen kernel: 64-bit, lsb, compat32
(XEN) Dom0 kernel: 64-bit, lsb, paddr 0xffffffff80200000 -> 0xffffffff805a8e6c
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN) Dom0 alloc.: 0000000134000000->0000000138000000 (978415 pages to be allocated)
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN) Loaded kernel: ffffffff80200000->ffffffff805a8e6c
(XEN) Init. ramdisk: ffffffff805a9000->ffffffff8181e800
(XEN) Phys-Mach map: ffffffff8181f000->ffffffff81fb5f78
(XEN) Start info: ffffffff81fb6000->ffffffff81fb649c
(XEN) Page tables: ffffffff81fb7000->ffffffff81fcc000
(XEN) Boot stack: ffffffff81fcc000->ffffffff81fcd000
(XEN) TOTAL: ffffffff80000000->ffffffff82400000
(XEN) ENTRY ADDRESS: ffffffff80200000
(XEN) Dom0 has maximum 1 VCPUs
(XEN) Initrd len 0x1275800, start at 0xffffffff805a9000
(XEN) Scrubbing Free RAM: .done.
(XEN) Xen trace buffers: disabled
(XEN) Std. Loglevel: Errors and warnings
(XEN) Guest Loglevel: Nothing (Rate-limited: Errors and warnings)
(XEN) Xen is relinquishing VGA console.
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen).
kernel direct mapping tables up to f35ef000 @ 1fce000-276e000
Bootdata ok (command line is root=/dev/md1 ro console=tty0 console=ttyS0,115200)
Linux version 2.6.18-xen (root@pegasus.gnu.org) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Thu Nov 8 18:26:21 EST 2007
BIOS-provided physical RAM map:
Xen: 0000000000000000 - 00000000f35ef000 (usable)
DMI not present or invalid.
ACPI: Unable to locate RSDP
Intel MultiProcessor Specification v1.4
Virtual Wire compatibility mode.
OEM ID: TYAN Product ID: S2882 APIC at: 0xFEE00000
I/O APIC #2 Version 17 at 0xFEC00000.
I/O APIC #3 Version 17 at 0xFD300000.
I/O APIC #4 Version 17 at 0xFD301000.
Setting APIC routing to xen
Processors: 1
Allocating PCI resources starting at c4000000 (gap: c0000000:40000000)
Built 1 zonelists. Total pages: 996847
Kernel command line: root=/dev/md1 ro console=tty0 console=ttyS0,115200
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Xen reported: 1792.239 MHz processor.
Console: colour VGA+ 80x50
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Software IO TLB enabled:
Aperture: 64 megabytes
Kernel range: ffff880006486000 - ffff88000a486000
Address size: 27 bits
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Memory: 3812988k/3987388k available (1996k kernel code, 165576k reserved, 867k data, 172k init)
Calibrating delay using timer specific routine.. 3585.49 BogoMIPS (lpj=17927467)
Security Framework v1.0.0 initialized
Capability LSM initialized
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
SMP alternatives: switching to UP code
Freeing SMP alternatives: 24k freed
GSI 16 sharing vector 0x70 and IRQ 16
GSI 17 sharing vector 0x78 and IRQ 17
GSI 18 sharing vector 0x88 and IRQ 18
GSI 19 sharing vector 0x90 and IRQ 19
GSI 24 sharing vector 0x98 and IRQ 24
GSI 25 sharing vector 0xA0 and IRQ 25
GSI 26 sharing vector 0xA8 and IRQ 26
GSI 27 sharing vector 0xB0 and IRQ 27
GSI 28 sharing vector 0xB8 and IRQ 28
GSI 29 sharing vector 0xC0 and IRQ 29
GSI 30 sharing vector 0xC8 and IRQ 30
GSI 31 sharing vector 0xD0 and IRQ 31
Brought up 1 CPUs
migration_cost=0
checking if image is initramfs... it is
Freeing initrd memory: 18902k freed
NET: Registered protocol family 16
PCI: Using configuration type 1
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI: disabled
xen_mem: Initialising balloon driver.
PCI: Probing PCI hardware
PCI: Discovered primary peer bus 01 [IRQ]
PCI: Using IRQ router default [1022/746b] at 0000:01:04.3
PCI->APIC IRQ transform: 0000:01:04.2[D] -> IRQ 19
PCI->APIC IRQ transform: 0000:02:09.0[A] -> IRQ 24
PCI->APIC IRQ transform: 0000:02:09.1[B] -> IRQ 25
PCI->APIC IRQ transform: 0000:03:03.0[A] -> IRQ 28
PCI->APIC IRQ transform: 0000:04:00.0[D] -> IRQ 19
PCI->APIC IRQ transform: 0000:04:00.1[D] -> IRQ 19
PCI->APIC IRQ transform: 0000:04:05.0[A] -> IRQ 19
PCI->APIC IRQ transform: 0000:04:06.0[A] -> IRQ 18
PCI->APIC IRQ transform: 0000:04:08.0[A] -> IRQ 18
PCI: Bridge: 0000:01:01.0
IO window: disabled.
MEM window: fd100000-fd1fffff
PREFETCH window: c4000000-c40fffff
PCI: Bridge: 0000:01:02.0
IO window: 1000-1fff
MEM window: fd200000-fd2fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:01:03.0
IO window: 2000-2fff
MEM window: fc000000-fd0fffff
PREFETCH window: c4100000-c41fffff
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
IA-32 Microcode Update Driver: v1.14a-xen <tigran@veritas.com>
audit: initializing netlink socket (disabled)
audit(1219269931.050:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
PCI: MSI quirk detected. PCI_BUS_FLAGS_NO_MSI set for subordinate bus.
PCI: MSI quirk detected. PCI_BUS_FLAGS_NO_MSI set for subordinate bus.
Real Time Clock Driver v1.12ac
Non-volatile memory driver v1.2
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
loop: loaded (max 8 devices)
Xen virtual console successfully installed as ttyS0
Event-channel device installed.
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
NET: Registered protocol family 1
NET: Registered protocol family 17
Freeing unused kernel memory: 172k freed
Loading, please wait...
input: AT Translated Set 2 keyboard as /class/input/input0
Begin: Loading essential drivers... ...
fuse init (API version 7.7)
device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com
md: linear personality registered for level -1
md: multipath personality registered for level -4
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
raid5: automatically using best checksumming function: generic_sse
generic_sse: 4728.000 MB/sec
raid5: using function: generic_sse (4728.000 MB/sec)
raid6: int64x1 1803 MB/s
raid6: int64x2 2457 MB/s
raid6: int64x4 2391 MB/s
raid6: int64x8 942 MB/s
raid6: sse2x1 2105 MB/s
raid6: sse2x2 2772 MB/s
raid6: sse2x4 3059 MB/s
raid6: using algorithm sse2x4 (3059 MB/s)
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
md: raid10 personality registered for level 10
Done.
Begin: Running /scripts/init-premount ...
Done.
Begin: Mounting root file system... ...
Begin: Running /scripts/local-top ...
Done.
Begin: Waiting for root file system... ...
SCSI subsystem initialized
ata1: SATA max UDMA/100 cmd 0xFFFFC20000030000 ctl 0x0 bmdma 0x0 irq 28
ata2: SATA max UDMA/100 cmd 0xFFFFC20000032000 ctl 0x0 bmdma 0x0 irq 28
ata3: SATA max UDMA/100 cmd 0xFFFFC20000034000 ctl 0x0 bmdma 0x0 irq 28
ata4: SATA max UDMA/100 cmd 0xFFFFC20000036000 ctl 0x0 bmdma 0x0 irq 28
scsi0 : sata_sil24
usbcore: registered new driver usbfs
usbcore: registered new driver hub
e100: Intel(R) PRO/100 Network Driver, 3.5.10-k2-NAPI
e100: Copyright(c) 1999-2005 Intel Corporation
ata1: SATA link down (SStatus 0 SControl 300)
scsi1 : sata_sil24
input: ImExPS/2 Generic Explorer Mouse as /class/input/input1
ata2: SATA link down (SStatus 0 SControl 300)
scsi2 : sata_sil24
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: ATA-6, max UDMA/133, 488397168 sectors: LBA48
ata3.00: ata3: dev 0 multi count 0
ata3.00: configured for UDMA/100
scsi3 : sata_sil24
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: ATA-6, max UDMA/133, 488397168 sectors: LBA48
ata4.00: ata4: dev 0 multi count 0
ata4.00: configured for UDMA/100
Vendor: ATA Model: WDC WD2500SD-01K Rev: 08.0
Type: Direct-Access ANSI SCSI revision: 05
Vendor: ATA Model: WDC WD2500SD-01K Rev: 08.0
Type: Direct-Access ANSI SCSI revision: 05
ohci_hcd 0000:04:00.0: OHCI Host Controller
ohci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 1
ohci_hcd 0000:04:00.0: irq 19, io mem 0xfd020000
SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
sda: Write Protect is off
SCSI device sda: drive cache: write back
SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
sda: Write Protect is off
SCSI device sda: drive cache: write back
sda: sda1
sd 2:0:0:0: Attached scsi disk sda
SCSI device sdb: 488397168 512-byte hdwr sectors (250059 MB)
sdb: Write Protect is off
SCSI device sdb: drive cache: write back
SCSI device sdb: 488397168 512-byte hdwr sectors (250059 MB)
sdb: Write Protect is off
SCSI device sdb: drive cache: write back
sdb:<6>usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
sdb1
sd 3:0:0:0: Attached scsi disk sdb
sd 2:0:0:0: Attached scsi generic sg0 type 0
sd 3:0:0:0: Attached scsi generic sg1 type 0
ohci_hcd 0000:04:00.1: OHCI Host Controller
ohci_hcd 0000:04:00.1: new USB bus registered, assigned bus number 2
ohci_hcd 0000:04:00.1: irq 19, io mem 0xfd021000
md: md0 stopped.
md: md1 stopped.
md: md2 stopped.
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
md: md0 stopped.
md: md1 stopped.
md: md2 stopped.
ata5: SATA max UDMA/100 cmd 0xFFFFC2000003E080 ctl 0xFFFFC2000003E08A bmdma 0xFFFFC2000003E000 irq 19
ata6: SATA max UDMA/100 cmd 0xFFFFC2000003E0C0 ctl 0xFFFFC2000003E0CA bmdma 0xFFFFC2000003E008 irq 19
ata7: SATA max UDMA/100 cmd 0xFFFFC2000003E280 ctl 0xFFFFC2000003E28A bmdma 0xFFFFC2000003E200 irq 19
ata8: SATA max UDMA/100 cmd 0xFFFFC2000003E2C0 ctl 0xFFFFC2000003E2CA bmdma 0xFFFFC2000003E208 irq 19
scsi4 : sata_sil
ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata5.00: ATA-6, max UDMA/133, 488395055 sectors: LBA48
ata5.00: ata5: dev 0 multi count 0
ata5.00: configured for UDMA/100
scsi5 : sata_sil
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata6.00: ATA-6, max UDMA/133, 488397168 sectors: LBA48
ata6.00: ata6: dev 0 multi count 0
ata6.00: configured for UDMA/100
scsi6 : sata_sil
ata7: SATA link down (SStatus 0 SControl 310)
scsi7 : sata_sil
ata8: SATA link down (SStatus 0 SControl 310)
Vendor: ATA Model: WDC WD2500SD-01K Rev: 08.0
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sdc: 488395055 512-byte hdwr sectors (250058 MB)
sdc: Write Protect is off
SCSI device sdc: drive cache: write back
SCSI device sdc: 488395055 512-byte hdwr sectors (250058 MB)
sdc: Write Protect is off
SCSI device sdc: drive cache: write back
sdc: sdc1 sdc2 sdc3 sdc4
sd 4:0:0:0: Attached scsi disk sdc
sd 4:0:0:0: Attached scsi generic sg2 type 0
Vendor: ATA Model: WDC WD2500SD-01K Rev: 08.0
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sdd: 488397168 512-byte hdwr sectors (250059 MB)
sdd: Write Protect is off
SCSI device sdd: drive cache: write back
SCSI device sdd: 488397168 512-byte hdwr sectors (250059 MB)
sdd: Write Protect is off
SCSI device sdd: drive cache: write back
sdd: sdd1 sdd2 sdd3 sdd4
sd 5:0:0:0: Attached scsi disk sdd
sd 5:0:0:0: Attached scsi generic sg3 type 0
AMD8111: IDE controller at PCI slot 0000:01:04.1
AMD8111: chipset revision 3
AMD8111: not 100% native mode: will probe irqs later
AMD8111: 0000:01:04.1 (rev 03) UDMA133 controller
ide0: BM-DMA at 0x3420-0x3427, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0x3428-0x342f, BIOS settings: hdc:pio, hdd:pio
md: md0 stopped.
md: bind<sdd1>
md: md1 stopped.
md: md2 stopped.
md: md0 stopped.
md: unbind<sdd1>
md: export_rdev(sdd1)
md: bind<sdd1>
md: bind<sdc1>
raid1: raid set md0 active with 2 out of 2 mirrors
md: md1 stopped.
md: bind<sdd2>
md: bind<sdc2>
raid1: raid set md1 active with 2 out of 2 mirrors
md: md2 stopped.
md: bind<sdd3>
md: bind<sdc3>
raid1: raid set md2 active with 2 out of 2 mirrors
Done.
Begin: Running /scripts/local-premount ...
Done.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Begin: Running /scripts/local-bottom ...
Done.
Done.
Begin: Running /scripts/init-bottom ...
Done.
tg3.c:v3.65 (August 07, 2006)
eth0: Tigon3 [partno(BCM95704A7) rev 2003 PHY(5704)] (PCIX:100MHz:64-bit) 10/100/1000BaseT Ethernet 00:e0:81:2b:66:8a
eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1]
eth0: dma_rwctrl[769f4000] dma_mask[64-bit]
eth1: Tigon3 [partno(BCM95704A7) rev 2003 PHY(5704)] (PCIX:100MHz:64-bit) 10/100/1000BaseT Ethernet 00:e0:81:2b:66:8b
eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1]
eth1: dma_rwctrl[769f4000] dma_mask[64-bit]
e100: eth2: e100_probe: addr 0xfd023000, irq 18, MAC addr 00:E0:81:2B:66:2C
* Reading files needed to boot... [ OK ]
* Preparing restricted drivers... [ OK ]
* Setting the system clock
* Starting basic networking... [ OK ]
* Starting kernel event manager... [ OK ]
* Loading hardware drivers... ts: Compaq touchscreen protocol output
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6 over IPv4 tunneling driver
md: bind<sdb1>
md: bind<sda1>
raid1: raid set md5 active with 2 out of 2 mirrors
input: PC Speaker as /class/input/input2
tg3: eth0: Link is up at 100 Mbps, full duplex.
tg3: eth0: Flow control is on for TX and on for RX.
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
AMD768 RNG detected
[ OK ]
* Setting the system clock
* Loading kernel modules... * Loading manual drivers... lp: driver loaded but no devices found
[ OK ]
* Setting kernel variables... error: "kernel.maps_protect" is an unknown key
error: "vm.mmap_min_addr" is an unknown key
[fail]
* Activating swap... [ OK ]
* Checking root file system... fsck 1.40.8 (13-Mar-2008)
/dev/md1: clean, 205752/1221600 files, 1015604/2441856 blocks
[ OK ]
* Checking file systems... fsck 1.40.8 (13-Mar-2008)
/dev/md0: clean, 67/124928 files, 141394/497856 blocks
[ OK ]
* Mounting local filesystems... [ OK ]
* Activating swapfile swap... [ OK ]
$Mounting securityfs on /sys/kernel/security: done.
ls: cannot access /sys/module/apparmor: No such file or directory
ls: cannot access /sys/module/apparmor: No such file or directory
$Loading AppArmor module: Failed.
* Checking minimum space in /tmp... [ OK ]
* Skipping firewall: ufw (not enabled)... [ OK ]
* Configuring network interfaces... [ OK ]
* Setting console screen modes and fonts
* Starting system log daemon... [ OK ]
* Starting kernel log daemon... [ OK ]
* Starting OpenBSD Secure Shell server sshd [ OK ]
* Starting Common Unix Printing System: cupsd [ OK ]
* Starting MTA [ OK ]
FATAL: Error inserting battery (/lib/modules/2.6.18-xen/kernel/drivers/acpi/battery.ko): No such device
* Starting powernowd... * CPU frequency scaling not supported... [ OK ]
* sadc not enabled in /etc/default/sysstat, not starting.
* Starting MD monitoring service mdadm --monitor [ OK ]
Debian GNU/Linux ttyS0 115200 (DIRECT)
**EMSI_REQA77E
pegasus.gnu.org login: * Reloading OpenBSD Secure Shell server's configuration sshd
Starting auto Xen domains: nessus.cfgcut: fields and positions are numbered from 1
Try `cut --help' for more information.
playground.cfgcut: fields and positions are numbered from 1
Try `cut --help' for more information.
cut: fields and positions are numbered from 1
Try `cut --help' for more information.
* [done]
* Starting anac(h)ronistic cron anacron [ OK ]
* Starting deferred execution scheduler atd [ OK ]
* Starting periodic command scheduler crond [ OK ]
* Enabling additional executable binary formats binfmt-support [ OK ]
* Enabling laptop mode... [ OK ]
* Running local boot scripts (/etc/rc.local) [ OK ]
Debian GNU/Linux ttyS0 115200 (DIRECT)
**EMSI_REQA77E
pegasus.gnu.org login:
Debian GNU/Linux ttyS0 115200 (DIRECT)
**EMSI_REQA77E
pegasus.gnu.org login: