OpenBSD 3.5 (GENERIC) #34: Mon Mar 29 12:24:55 MST 2004
deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Celeron(R) CPU 2.00GHz ("GenuineIntel" 686-class) 2.01 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CF
LUSH,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID
real mem = 234401792 (228908K)
avail mem = 210989056 (206044K)
using 2886 buffers containing 11821056 bytes (11544K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(19) BIOS, date 04/20/04, BIOS32 rev. 0 @ 0xfbaf0
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
pcibios0 at bios0: rev. 2.1 @ 0xf0000/0xde44
pcibios0: PCI IRQ Routing Table rev. 1.0 @ 0xfddc0/128 (6 entries)
pcibios0: PCI Exclusive IRQs: 5 9 11
pcibios0: PCI Interrupt Router at 000:02:0 ("SIS 85C503 System" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0xc000
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "SIS 651 PCI" rev 0x02
ppb0 at pci0 dev 1 function 0 "SIS 86C201 AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "SIS 650 VGA" rev 0x00: aperture at 0xe0000000, si
ze 0x400000
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 2 function 0 "SIS 85C503 System" rev 0x25
pciide0 at pci0 dev 2 function 5 "SIS 5513 EIDE" rev 0x00: 651: DMA, channel 0 c
onfigured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <WDC WD400JB-00FMA0>
wd0: 16-sector PIO, LBA, 38166MB, 78165360 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
pciide0: channel 1 disabled (no drives)
auich0 at pci0 dev 2 function 7 "SIS 7012 AC97 Audio" rev 0xa0: irq 9, SiS7012 A
C97
ac97: codec id 0x414c4760 (Avance Logic <60>)
audio0 at auich0
auich0: measured ac97 link rate at 48023 Hz, will use 48000 Hz
ohci0 at pci0 dev 3 function 0 "SIS 5597/5598 USB" rev 0x0f: irq 9, version 1.0,
legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: SIS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1 at pci0 dev 3 function 1 "SIS 5597/5598 USB" rev 0x0f: irq 5, version 1.0,
legacy support
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: SIS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
"SIS 7002 USB" rev 0x00 at pci0 dev 3 function 3 not configured
sis0 at pci0 dev 4 function 0 "SIS 900 10/100BaseTX" rev 0x90: irq 11, address
00:0c:76:e4:45:23
ukphy0 at sis0 phy 1: Generic IEEE 802.3u media interface
ukphy0: OUI 0x000020, model 0x0020, rev. 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
lm0 at isa0 port 0x290/8: W83697HF
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
biomask 4260 netmask 4a60 ttymask 5ae2
pctr: user-level cycle counter enabled
dkcsum: wd0 matched BIOS disk 80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
$