rendered paste bodyLinux version 2.6.25.11-0.1-default (geeko@buildhost) (gcc version 4.3.1 20080507 (prerelease) [gcc-4_3-branch revision 135036] (SUSE Linux) ) #1 SMP Wed Aug 20 13:33:17 CEST 2008
Command line: root=/dev/disk/by-id/scsi-SATA_FUJITSU_MHV2200_NY08T6C2999F-part7 resume=/dev/sda5 splash=silent vga=0x317
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007fe70000 (usable)
BIOS-e820: 000000007fe70000 - 000000007ff00000 (ACPI NVS)
BIOS-e820: 000000007ff00000 - 0000000080000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
Entering add_active_range(0, 0, 159) 0 entries of 3200 used
Entering add_active_range(0, 256, 523888) 1 entries of 3200 used
end_pfn_map = 1048576
DMI present.
ACPI: RSDP 000F6960, 0024 (r2 TOSINV)
ACPI: XSDT 7FE78718, 008C (r1 TOSINV TOSINV00 6040000 INV 0)
ACPI: FACP 7FE81BF8, 00F4 (r3 TOSINV TOSINV00 6040000 ALAN 1)
ACPI: DSDT 7FE7A4B1, 76D3 (r2 TOSINV CALISTGA 6040000 INTL 20050624)
ACPI: FACS 7FE82FC0, 0040
ACPI: APIC 7FE81CEC, 0068 (r1 INTEL CALISTGA 6040000 LOHR 5A)
ACPI: HPET 7FE81D54, 0038 (r1 INTEL CALISTGA 6040000 LOHR 5A)
ACPI: MCFG 7FE81D8C, 003C (r1 INTEL CALISTGA 6040000 LOHR 5A)
ACPI: TCPA 7FE81DC8, 0032 (r1 PTLTD CALISTGA 6040000 PTL 1)
ACPI: APIC 7FE81DFA, 0068 (r1 TOSINV APIC 6040000 INV 0)
ACPI: SLIC 7FE81E62, 0176 (r1 TOSINV TOSINV00 6040000 INV 0)
ACPI: BOOT 7FE81FD8, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1)
ACPI: SSDT 7FE79E62, 064F (r1 SataRe SataPri 1000 INTL 20050624)
ACPI: SSDT 7FE797D0, 0692 (r1 SataRe SataSec 1000 INTL 20050624)
ACPI: SSDT 7FE78D30, 025F (r1 PmRef Cpu0Tst 3000 INTL 20050624)
ACPI: SSDT 7FE78C8A, 00A6 (r1 PmRef Cpu1Tst 3000 INTL 20050624)
ACPI: SSDT 7FE787A4, 04E6 (r1 PmRef CpuPm 3000 INTL 20050624)
ACPI: BIOS bug: multiple APIC/MADT found, using 0
ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org
ACPI: DMI detected: Toshiba
No NUMA configuration found
Faking a node at 0000000000000000-000000007fe70000
Entering add_active_range(0, 0, 159) 0 entries of 3200 used
Entering add_active_range(0, 256, 523888) 1 entries of 3200 used
Bootmem setup node 0 0000000000000000-000000007fe70000
NODE_DATA [000000000000c000 - 0000000000013fff]
bootmap [0000000000014000 - 0000000000023fcf] pages 10
early res: 0 [0-fff] BIOS data page
early res: 1 [6000-7fff] SMP_TRAMPOLINE
early res: 2 [200000-8b7bd7] TEXT DATA BSS
early res: 3 [37a77000-37fef8bd] RAMDISK
early res: 4 [9f800-a07ff] EBDA
early res: 5 [8000-bfff] PGTABLE
[ffffe20000000000-ffffe200001fffff] PMD ->ffff810001200000 on node 0
[ffffe20000200000-ffffe200003fffff] PMD ->ffff810001600000 on node 0
[ffffe20000400000-ffffe200005fffff] PMD ->ffff810001a00000 on node 0
[ffffe20000600000-ffffe200007fffff] PMD ->ffff810001e00000 on node 0
[ffffe20000800000-ffffe200009fffff] PMD ->ffff810002200000 on node 0
[ffffe20000a00000-ffffe20000bfffff] PMD ->ffff810002600000 on node 0
[ffffe20000c00000-ffffe20000dfffff] PMD ->ffff810002a00000 on node 0
[ffffe20000e00000-ffffe20000ffffff] PMD ->ffff810002e00000 on node 0
[ffffe20001000000-ffffe200011fffff] PMD ->ffff810003200000 on node 0
[ffffe20001200000-ffffe200013fffff] PMD ->ffff810003600000 on node 0
[ffffe20001400000-ffffe200015fffff] PMD ->ffff810003a00000 on node 0
[ffffe20001600000-ffffe200017fffff] PMD ->ffff810003e00000 on node 0
[ffffe20001800000-ffffe200019fffff] PMD ->ffff810004200000 on node 0
[ffffe20001a00000-ffffe20001bfffff] PMD ->ffff810004600000 on node 0
Zone PFN ranges:
DMA 0 -> 4096
DMA32 4096 -> 1048576
Normal 1048576 -> 1048576
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0 -> 159
0: 256 -> 523888
On node 0 totalpages: 523791
DMA zone: 56 pages used for memmap
DMA zone: 1729 pages reserved
DMA zone: 2214 pages, LIFO batch:0
DMA32 zone: 7106 pages used for memmap
DMA32 zone: 512686 pages, LIFO batch:31
Normal zone: 0 pages used for memmap
Movable zone: 0 pages used for memmap
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 (Bootup-CPU)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Setting APIC routing to flat
ACPI: HPET id: 0x8086a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
Allocating PCI resources starting at 88000000 (gap: 80000000:7ec00000)
SMP: Allowing 2 CPUs, 0 hotplug CPUs
PERCPU: Allocating 47936 bytes of per cpu data
Built 1 zonelists in Node order, mobility grouping on. Total pages: 514900
Policy zone: DMA32
Kernel command line: root=/dev/disk/by-id/scsi-SATA_FUJITSU_MHV2200_NY08T6C2999F-part7 resume=/dev/sda5 splash=silent vga=0x317
bootsplash: silent mode.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Extended CMOS year: 2000
TSC calibrated against PM_TIMER
time.c: Detected 1995.001 MHz processor.
Console: colour dummy device 80x25
console [tty0] enabled
Checking aperture...
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 2053676k/2095552k available (2366k kernel code, 41488k reserved, 1928k data, 404k init)
CPA: page pool initialized 1 of 1 pages preallocated
hpet clockevent registered
Calibrating delay using timer specific routine.. 3994.76 BogoMIPS (lpj=7989529)
Security Framework initialized
AppArmor: AppArmor initialized <NULL>
AppArmor: Registered secondary security module capability
Capability LSM initialized as secondary
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mount-cache hash table entries: 256
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU 0/0 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU0: Thermal monitoring handled by SMI
using mwait in idle threads.
ACPI: Core revision 20070126
ACPI: Checking initramfs for custom DSDT
Parsing all Control Methods:
Table [DSDT](id 0001) - 1014 Objects with 96 Devices 281 Methods 28 Regions
Parsing all Control Methods:
Table [SSDT](id 0002) - 10 Objects with 3 Devices 4 Methods 0 Regions
Parsing all Control Methods:
Table [SSDT](id 0003) - 10 Objects with 3 Devices 4 Methods 0 Regions
Parsing all Control Methods:
Table [SSDT](id 0004) - 7 Objects with 0 Devices 3 Methods 0 Regions
Parsing all Control Methods:
Table [SSDT](id 0005) - 4 Objects with 0 Devices 3 Methods 0 Regions
Parsing all Control Methods:
Table [SSDT](id 0006) - 13 Objects with 0 Devices 4 Methods 0 Regions
tbxface-0598 [00] tb_load_namespace : ACPI Tables successfully acquired
evxfevnt-0091 [00] enable : Transition to ACPI mode successful
Using local APIC timer interrupts.
APIC timer calibration result 10390638
Detected 10.390 MHz APIC timer.
Booting processor 1/2 APIC 0x1
Initializing CPU#1
Calibrating delay using timer specific routine.. 3990.05 BogoMIPS (lpj=7980105)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU 1/1 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU1: Thermal monitoring enabled (TM2)
Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz stepping 06
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
CPU0 attaching sched-domain:
domain 0: span 00000000,00000000,00000000,00000003
groups: 00000000,00000000,00000000,00000001 00000000,00000000,00000000,00000002
domain 1: span 00000000,00000000,00000000,00000003
groups: 00000000,00000000,00000000,00000003
CPU1 attaching sched-domain:
domain 0: span 00000000,00000000,00000000,00000003
groups: 00000000,00000000,00000000,00000002 00000000,00000000,00000000,00000001
domain 1: span 00000000,00000000,00000000,00000003
groups: 00000000,00000000,00000000,00000003
net_namespace: 1016 bytes
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
PCI: Not using MMCONFIG.
PCI: Using configuration type 1
evgpeblk-0956 [00] ev_create_gpe_block : GPE 00 to 1F [_GPE] 4 regs on int 0x9
evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 6 Wake, Enabled 5 Runtime GPEs in this block
ACPI: EC: Look up EC in DSDT
Completing Region/Field/Buffer/Package initialization:............................................................................
Initialized 25/28 Regions 0/0 Fields 32/33 Buffers 19/26 Packages (1067 nodes)
Initializing Device/Processor/Thermal objects by executing _INI methods:<5>ACPI: BIOS _OSI(Linux) query ignored via DMI
..
Executed 2 _INI methods requiring 0 _STA executions (examined 108 objects)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in interrupt mode
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 *10 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: Power Resource [FN00] (off)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 10 devices
ACPI: ACPI bus type pnp unregistered
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
PCI-GART: No AMD northbridge found.
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 64-bit timers, 14318180 Hz
AppArmor: AppArmor Filesystem Enabled
ACPI: RTC can wake from S4
Switched to high resolution mode on CPU 0
Switched to high resolution mode on CPU 1
system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
system 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved
system 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved
system 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved
system 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved
system 00:01: iomem range 0xfed20000-0xfed3ffff could not be reserved
system 00:01: iomem range 0xfed40000-0xfed44fff could not be reserved
system 00:01: iomem range 0xfed45000-0xfed8ffff could not be reserved
system 00:04: iomem range 0xfed00000-0xfed003ff could not be reserved
system 00:06: ioport range 0x3e8-0x3ef has been reserved
system 00:06: ioport range 0x400-0x401 has been reserved
system 00:06: ioport range 0x680-0x69f has been reserved
system 00:06: ioport range 0x800-0x80f has been reserved
system 00:06: ioport range 0x1000-0x107f has been reserved
system 00:06: ioport range 0x1180-0x11bf has been reserved
system 00:06: ioport range 0x1640-0x164f has been reserved
system 00:06: ioport range 0xfe00-0xfe01 has been reserved
PCI: Failed to allocate mem resource #6:20000@e0000000 for 0000:01:00.0
PCI: Bridge: 0000:00:01.0
IO window: 2000-2fff
MEM window: 0xcd000000-0xceffffff
PREFETCH window: 0x00000000d0000000-0x00000000dfffffff
PCI: Bridge: 0000:00:1c.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.1
IO window: 3000-3fff
MEM window: 0xf0700000-0xf07fffff
PREFETCH window: 0x00000000f0200000-0x00000000f03fffff
PCI: Bridge: 0000:00:1c.2
IO window: 4000-4fff
MEM window: 0xf0800000-0xf08fffff
PREFETCH window: 0x00000000f0400000-0x00000000f05fffff
PCI: Bus 8, cardbus bridge: 0000:07:06.0
IO window: 0x00005400-0x000054ff
IO window: 0x00005800-0x000058ff
PREFETCH window: 0x88000000-0x8bffffff
MEM window: 0x8c000000-0x8fffffff
PCI: Bridge: 0000:00:1e.0
IO window: 5000-5fff
MEM window: 0xf0900000-0xf09fffff
PREFETCH window: 0x0000000088000000-0x000000008bffffff
ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:01.0 to 64
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1c.0 to 64
ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1c.1 to 64
ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1c.2 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
PCI: Enabling device 0000:07:06.0 (0000 -> 0003)
ACPI: PCI Interrupt 0000:07:06.0[A] -> GSI 18 (level, low) -> IRQ 18
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
Unpacking initramfs... done
Freeing initrd memory: 5602k freed
Simple Boot Flag at 0x36 set to 0x1
audit: initializing netlink socket (disabled)
type=2000 audit(1219252810.017:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:01:00.0: Boot video device
pci 0000:07:08.0: Firmware left e100 interrupts enabled; disabling
PCI: Setting latency timer of device 0000:00:01.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:01.0:pcie00]
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.0:pcie00]
Allocate Port Service[0000:00:1c.0:pcie02]
PCI: Setting latency timer of device 0000:00:1c.1 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.1:pcie00]
Allocate Port Service[0000:00:1c.1:pcie02]
PCI: Setting latency timer of device 0000:00:1c.2 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.2:pcie00]
Allocate Port Service[0000:00:1c.2:pcie02]
vesafb: framebuffer at 0xd0000000, mapped to 0xffffc20000900000, using 6144k, total 262144k
vesafb: mode is 1024x768x16, linelength=2048, pages=1
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
bootsplash 3.1.6-2004/03/31: looking for picture...
bootsplash: silentjpeg size 166113 bytes
bootsplash: ...found (1024x768, 154167 bytes, v3).
Console: switching to colour frame buffer device 124x44
fb0: VESA VGA frame buffer device
hpet_resources: 0xfed00000 is busy
Non-volatile memory driver v1.2
Linux agpgart interface v0.103
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: PC Speaker as /devices/platform/pcspkr/input/input0
cpuidle: using governor ladder
cpuidle: using governor menu
NET: Registered protocol family 1
registered taskstats version 1
Freeing unused kernel memory: 404k freed
Write protecting the kernel read-only data: 1688k
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
ACPI: SSDT 7FE794D6, 023D (r1 PmRef Cpu0Ist 3000 INTL 20050624)
Parsing all Control Methods:
Table [SSDT](id 00DE) - 6 Objects with 0 Devices 4 Methods 0 Regions
ACPI: SSDT 7FE78F8F, 04C2 (r1 PmRef Cpu0Cst 3001 INTL 20050624)
Parsing all Control Methods:
Table [SSDT](id 00DF) - 1 Objects with 0 Devices 1 Methods 0 Regions
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI: ACPI0007:00 is registered as cooling_device0
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: SSDT 7FE79713, 00BD (r1 PmRef Cpu1Ist 3000 INTL 20050624)
Parsing all Control Methods:
Table [SSDT](id 00E7) - 4 Objects with 0 Devices 4 Methods 0 Regions
ACPI: SSDT 7FE79451, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050624)
Parsing all Control Methods:
Table [SSDT](id 00E8) - 1 Objects with 0 Devices 1 Methods 0 Regions
ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
ACPI: ACPI0007:01 is registered as cooling_device1
Marking TSC unstable due to TSC halts in idle
ACPI: Processor [CPU1] (supports 8 throttling states)
ACPI: LNXTHERM:01 is registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (44 C)
ACPI: LNXTHERM:02 is registered as thermal_zone1
ACPI: Transitioning device [FAN0] to D0
ACPI: Unable to turn cooling device [ffff81007fb7ff10] 'on'
ACPI: Thermal Zone [TZ01] (47 C)
ACPI: ACPI Dock Station Driver
SCSI subsystem initialized
libata version 3.00 loaded.
ata_piix 0000:00:1f.2: version 2.12
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
PCI: Setting latency timer of device 0000:00:1f.2 to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x18b0 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18b8 irq 15
ata1.00: ATA-7: FUJITSU MHV2200BT PL, 00000050, max UDMA/100
ata1.00: 390721968 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.00: configured for UDMA/100
Clocksource tsc unstable (delta = -377064256 ns)
Synaptics Touchpad, model: 1, fw: 6.2, id: 0x25a0b1, caps: 0xa04713/0x0
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input2
ata2.00: ATAPI: MATSHITADVD-RAM UJ-850S, 1.10, max UDMA/33
ata2.00: configured for UDMA/33
scsi 0:0:0:0: Direct-Access ATA FUJITSU MHV2200B 0000 PQ: 0 ANSI: 5
scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-850S 1.10 PQ: 0 ANSI: 5
ACPI: Transitioning device [FAN0] to D3
ACPI: PNP0C0B:00 is registered as cooling_device2
ACPI: Fan [FAN0] (off)
BIOS EDD facility v0.16 2004-Jun-25, 6 devices found
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Driver 'sd' needs updating - please use bus_type methods
sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors (200050 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
USB Universal Host Controller Interface driver v3.0
sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors (200050 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 <<6>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001800
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: UHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.25.11-0.1-default uhci_hcd
usb usb1: SerialNumber: 0000:00:1d.0
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
sda5<7>PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf0c04000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 8 ports detected
sda6 sda7<6>usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.25.11-0.1-default ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
sda8 >
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
sd 0:0:0:0: [sda] Attached SCSI disk
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001820
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.25.11-0.1-default uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.1
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001840
usb usb4: configuration #1 chosen from 1 choice
usb 2-3: new high speed USB device using ehci_hcd and address 2
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usb 2-3: configuration #1 chosen from 1 choice
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb 2-3: New USB device found, idVendor=054c, idProduct=0243
usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-3: Product: Strorage Media
usb 2-3: Manufacturer: Sony
usb 2-3: SerialNumber: 1307071001482
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.25.11-0.1-default uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.2
ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001860
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.25.11-0.1-default uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.3
PM: Starting manual resume from disk
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 1:0:0:0: Attached scsi generic sg1 type 5
ACPI: Transitioning device [FAN0] to D0
ACPI: Unable to turn cooling device [ffff81007fb7ff10] 'on'
ACPI: Transitioning device [FAN0] to D0
ACPI: Unable to turn cooling device [ffff81007fb7ff10] 'on'
intel_rng: FWH not detected
ACPI: AC Adapter [ADP0] (on-line)
ACPI: Battery Slot [BAT0] (battery present)
iTCO_vendor_support: vendor-support=0
Driver 'sr' needs updating - please use bus_type methods
Initializing USB Mass Storage driver...
scsi2 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
ACPI: Power Button (FF) [PWRF]
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4
ACPI: Lid Switch [LID]
input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
ACPI: Power Button (CM) [PWRB]
ACPI: device:04 is registered as cooling_device3
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/device:02/input/input6
rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k
Yenta: CardBus bridge found at 0000:07:06.0 [1179:ff10]
Yenta: Enabling burst memory read transactions
Yenta: Using CSCINT to route CSC interrupts to PCI
ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
Yenta: Routing CardBus interrupts to PCI
ACPI: device:0a is registered as cooling_device4
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:07/input/input7
Yenta TI: socket 0000:07:06.0, mfunc 0x01a01b22, devctl 0x66
e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
Yenta: ISA IRQ mask 0x0cf8, PCI irq 18
Socket status: 30000006
Yenta: Raising subordinate bus# of parent bus (#07) from #07 to #0b
pcmcia: parent PCI bridge I/O window: 0x5000 - 0x5fff
pcmcia: parent PCI bridge Memory window: 0xf0900000 - 0xf09fffff
pcmcia: parent PCI bridge Memory window: 0x88000000 - 0x8bffffff
ACPI: PCI Interrupt 0000:07:06.1[B] -> GSI 17 (level, low) -> IRQ 17
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[f0906000-f09067ff] Max Packet=[2048] IR/IT contexts=[4/8]
ACPI: PCI Interrupt 0000:07:08.0[A] -> GSI 20 (level, low) -> IRQ 20
iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.23ks
e100: eth0: e100_probe: addr 0xf0905000, irq 20, MAC addr 00:a0:d1:69:9e:28
sdhci: SDHCI controller found at 0000:07:06.3 [104c:803c] (rev 0)
ACPI: PCI Interrupt 0000:07:06.3[A] -> GSI 18 (level, low) -> IRQ 18
mmc0: SDHCI at 0xf0906800 irq 18 DMA
ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 19
ACPI: I/O resource 0000:00:1f.3 [0x18c0-0x18df] conflicts with ACPI region SMBI [0x18c0-0x18cf]
ACPI: Device needs an ACPI driver
ACPI: PCI Interrupt 0000:07:06.2[A] -> GSI 18 (level, low) -> IRQ 18
iwl3945: Copyright(c) 2003-2007 Intel Corporation
ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:05:00.0 to 64
iwl3945: Detected Intel PRO/Wireless 3945ABG Network Connection
scsi 2:0:0:0: Direct-Access Sony Storage media 0100 PQ: 0 ANSI: 0 CCS
iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels
phy0: Selected rate control algorithm 'iwl-3945-rs'
sd 2:0:0:0: [sdb] 15858688 512-byte hardware sectors (8120 MB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 43 00 00 00
sd 2:0:0:0: [sdb] Assuming drive cache: write through
sd 2:0:0:0: [sdb] 15858688 512-byte hardware sectors (8120 MB)
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:1b.0 to 64
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 43 00 00 00
sd 2:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1
hda_codec: Unknown model for ALC660VD/ALC861VD, trying auto-probe from BIOS...
ALSA sound/pci/hda/hda_codec.c:3021: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:3025: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:3029: hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:3030: mono: mono_out=0x0
ALSA sound/pci/hda/hda_codec.c:3038: inputs: mic=0x18, fmic=0x0, line=0x0, fline=0x0, cd=0x0, aux=0x0
sd 2:0:0:0: [sdb] Attached SCSI removable disk
sd 2:0:0:0: Attached scsi generic sg2 type 0
usb-storage: device scan complete
ACPI: PCI interrupt for device 0000:05:00.0 disabled
Adding 9446180k swap on /dev/sda5. Priority:-1 extents:1 across:9446180k
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
pccard: PCMCIA card inserted into slot 0
cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xd3fff 0xdc000-0xfffff
cs: memory probe 0x60000000-0x60ffffff: excluding 0x60000000-0x60ffffff
cs: memory probe 0x88000000-0x8bffffff: excluding 0x88000000-0x8bffffff
cs: memory probe 0xa0000000-0xa0ffffff: clean.
cs: memory probe 0xf0900000-0xf09fffff: excluding 0xf0900000-0xf090ffff
pcmcia: registering new device pcmcia0.0
comedi: version 0.7.76 - David Schleef <ds@schleef.org>
Available NI device IDs:
pcmcia: request for exclusive IRQ could not be fulfilled.
pcmcia: the driver needs updating to supported shared IRQ lines.
loop: module loaded
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda8, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
fuse init (API version 7.9)
type=1505 audit(1219245624.347:2): operation="profile_load" name="/bin/ping" name2="default" pid=1714
type=1505 audit(1219245624.407:3): operation="profile_load" name="/sbin/klogd" name2="default" pid=1732
type=1505 audit(1219245624.475:4): operation="profile_load" name="/sbin/syslog-ng" name2="default" pid=1736
type=1505 audit(1219245624.499:5): operation="profile_load" name="/sbin/syslogd" name2="default" pid=1737
type=1505 audit(1219245624.535:6): operation="profile_load" name="/usr/sbin/avahi-daemon" name2="default" pid=1738
type=1505 audit(1219245624.755:7): operation="profile_load" name="/usr/sbin/identd" name2="default" pid=1751
type=1505 audit(1219245624.795:8): operation="profile_load" name="/usr/sbin/mdnsd" name2="default" pid=1778
type=1505 audit(1219245624.875:9): operation="profile_load" name="/usr/sbin/nscd" name2="default" pid=1791
type=1505 audit(1219245624.963:10): operation="profile_load" name="/usr/sbin/ntpd" name2="default" pid=1807
type=1505 audit(1219245625.007:11): operation="profile_load" name="/usr/sbin/traceroute" name2="default" pid=1819
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
usb 2-3: USB disconnect, address 2
ip6_tables: (C) 2000-2006 Netfilter Core Team
ip_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
ADDRCONF(NETDEV_UP): eth0: link is not ready
ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 18 (level, low) -> IRQ 18
PM: Writing back config space on device 0000:05:00.0 at offset 1 (was 100002, writing 100006)
ADDRCONF(NETDEV_UP): wlan0: link is not ready
NET: Registered protocol family 17
bootsplash: status on console 0 changed to on
wlan0: Initial auth_alg=0
wlan0: authenticate with AP 00:15:af:26:70:e2
wlan0: RX authentication from 00:15:af:26:70:e2 (alg=0 transaction=2 status=0)
wlan0: authenticated
wlan0: associate with AP 00:15:af:26:70:e2
wlan0: RX AssocResp from 00:15:af:26:70:e2 (capab=0x421 status=0 aid=1)
wlan0: associated
wlan0: switched to short barker preamble (BSSID=00:15:af:26:70:e2)
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
wlan0: WMM queue=2 aci=0 acm=0 aifs=2 cWmin=7 cWmax=1023 burst=0
wlan0: WMM queue=3 aci=1 acm=0 aifs=7 cWmin=15 cWmax=1023 burst=0
wlan0: WMM queue=1 aci=2 acm=0 aifs=2 cWmin=7 cWmax=15 burst=30
wlan0: WMM queue=0 aci=3 acm=0 aifs=2 cWmin=3 cWmax=7 burst=15
wlan0: disassociate(reason=3)
wlan0: no IPv6 routers present
CPU0 attaching NULL sched-domain.
CPU1 attaching NULL sched-domain.
CPU0 attaching sched-domain:
domain 0: span 00000000,00000000,00000000,00000003
groups: 00000000,00000000,00000000,00000001 00000000,00000000,00000000,00000002
domain 1: span 00000000,00000000,00000000,00000003
groups: 00000000,00000000,00000000,00000003
CPU1 attaching sched-domain:
domain 0: span 00000000,00000000,00000000,00000003
groups: 00000000,00000000,00000000,00000002 00000000,00000000,00000000,00000001
domain 1: span 00000000,00000000,00000000,00000003
groups: 00000000,00000000,00000000,00000003
wlan0: RX deauthentication from 00:15:af:26:70:e2 (reason=6)
wlan0: deauthenticated
wlan0: RX deauthentication from 00:15:af:26:70:e2 (reason=6)
wlan0: RX deauthentication from 00:15:af:26:70:e2 (reason=6)
wlan0: RX deauthentication from 00:15:af:26:70:e2 (reason=6)
wlan0: RX deauthentication from 00:15:af:26:70:e2 (reason=6)
wlan0: RX deauthentication from 00:15:af:26:70:e2 (reason=6)
wlan0: RX deauthentication from 00:15:af:26:70:e2 (reason=6)
wlan0: RX deauthentication from 00:15:af:26:70:e2 (reason=6)
wlan0: RX deauthentication from 00:15:af:26:70:e2 (reason=6)
wlan0: RX deauthentication from 00:15:af:26:70:e2 (reason=6)
wlan0: RX deauthentication from 00:15:af:26:70:e2 (reason=6)
wlan0: RX deauthentication from 00:15:af:26:70:e2 (reason=6)
wlan0: RX deauthentication from 00:15:af:26:70:e2 (reason=6)
wlan0: RX deauthentication from 00:15:af:26:70:e2 (reason=6)
wlan0: RX deauthentication from 00:15:af:26:70:e2 (reason=6)
wlan0: RX deauthentication from 00:15:af:26:70:e2 (reason=6)
wlan0: RX deauthentication from 00:15:af:26:70:e2 (reason=6)
wlan0: RX deauthentication from 00:15:af:26:70:e2 (reason=6)
wlan0: RX deauthentication from 00:15:af:26:70:e2 (reason=6)
wlan0: RX deauthentication from 00:15:af:26:70:e2 (reason=6)
wlan0: RX deauthentication from 00:15:af:26:70:e2 (reason=6)
wlan0: RX deauthentication from 00:15:af:26:70:e2 (reason=6)
wlan0: RX deauthentication from 00:15:af:26:70:e2 (reason=6)
wlan0: RX deauthentication from 00:15:af:26:70:e2 (reason=6)
wlan0: RX deauthentication from 00:15:af:26:70:e2 (reason=6)
wlan0: RX deauthentication from 00:15:af:26:70:e2 (reason=6)
wlan0: RX deauthentication from 00:15:af:26:70:e2 (reason=6)
wlan0: authenticate with AP 00:15:af:26:70:e2
wlan0: RX authentication from 00:15:af:26:70:e2 (alg=0 transaction=2 status=0)
wlan0: authenticated
wlan0: associate with AP 00:15:af:26:70:e2
wlan0: RX ReassocResp from 00:15:af:26:70:e2 (capab=0x421 status=0 aid=1)
wlan0: associated
wlan0: switched to short barker preamble (BSSID=00:15:af:26:70:e2)
wlan0: disassociate(reason=3)
iwl3945: Microcode SW error detected. Restarting 0x82000008.
iwl3945: Error Reply type 0x00000005 cmd REPLY_TX (0x1C) seq 0x0007 ser 0x0000004B
iwl3945: Can't stop Rx DMA.
wlan0: Initial auth_alg=0
wlan0: authenticate with AP 00:15:af:26:70:e2
wlan0: RX authentication from 00:15:af:26:70:e2 (alg=0 transaction=2 status=0)
wlan0: authenticated
wlan0: associate with AP 00:15:af:26:70:e2
wlan0: Initial auth_alg=0
wlan0: authenticate with AP 00:15:af:26:70:e2
wlan0: RX authentication from 00:15:af:26:70:e2 (alg=0 transaction=2 status=0)
wlan0: authenticated
wlan0: associate with AP 00:15:af:26:70:e2
wlan0: RX ReassocResp from 00:15:af:26:70:e2 (capab=0x421 status=0 aid=1)
wlan0: associated
wlan0: switched to short barker preamble (BSSID=00:15:af:26:70:e2)
wlan0: WMM queue=2 aci=0 acm=0 aifs=2 cWmin=7 cWmax=1023 burst=0
wlan0: WMM queue=3 aci=1 acm=0 aifs=7 cWmin=15 cWmax=1023 burst=0
wlan0: WMM queue=1 aci=2 acm=0 aifs=2 cWmin=7 cWmax=15 burst=30
wlan0: WMM queue=0 aci=3 acm=0 aifs=2 cWmin=3 cWmax=7 burst=15
SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=1.0.0.203 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=1.0.0.203 DST=224.0.0.251 LEN=486 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=466
SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=1.0.0.203 DST=224.0.0.251 LEN=260 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=240
SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=1.0.0.203 DST=224.0.0.251 LEN=486 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=466
SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=1.0.0.203 DST=224.0.0.251 LEN=486 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=466
SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=1.0.0.203 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=1.0.0.203 DST=224.0.0.251 LEN=414 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=394
SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=1.0.0.203 DST=224.0.0.251 LEN=450 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=430
SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=1.0.0.203 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=1.0.0.203 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=1.0.0.203 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
wlan0: WMM queue=2 aci=0 acm=0 aifs=2 cWmin=7 cWmax=1023 burst=0
wlan0: WMM queue=3 aci=1 acm=0 aifs=7 cWmin=15 cWmax=1023 burst=0
wlan0: WMM queue=1 aci=2 acm=0 aifs=2 cWmin=7 cWmax=15 burst=30
wlan0: WMM queue=0 aci=3 acm=0 aifs=2 cWmin=3 cWmax=7 burst=15
SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=1.0.0.203 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=1.0.0.203 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
wlan0: WMM queue=2 aci=0 acm=0 aifs=2 cWmin=7 cWmax=1023 burst=0
wlan0: WMM queue=3 aci=1 acm=0 aifs=7 cWmin=15 cWmax=1023 burst=0
wlan0: WMM queue=1 aci=2 acm=0 aifs=2 cWmin=7 cWmax=15 burst=30
wlan0: WMM queue=0 aci=3 acm=0 aifs=2 cWmin=3 cWmax=7 burst=15
pccard: card ejected from slot 0
SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=1.0.0.203 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
pccard: PCMCIA card inserted into slot 0
pcmcia: registering new device pcmcia0.0
pcmcia: request for exclusive IRQ could not be fulfilled.
pcmcia: the driver needs updating to supported shared IRQ lines.
wlan0: WMM queue=2 aci=0 acm=0 aifs=2 cWmin=7 cWmax=1023 burst=0
wlan0: WMM queue=3 aci=1 acm=0 aifs=7 cWmin=15 cWmax=1023 burst=0
wlan0: WMM queue=1 aci=2 acm=0 aifs=2 cWmin=7 cWmax=15 burst=30
wlan0: WMM queue=0 aci=3 acm=0 aifs=2 cWmin=3 cWmax=7 burst=15
wlan0: WMM queue=2 aci=0 acm=0 aifs=2 cWmin=7 cWmax=1023 burst=0
wlan0: WMM queue=3 aci=1 acm=0 aifs=7 cWmin=15 cWmax=1023 burst=0
wlan0: WMM queue=1 aci=2 acm=0 aifs=2 cWmin=7 cWmax=15 burst=30
wlan0: WMM queue=0 aci=3 acm=0 aifs=2 cWmin=3 cWmax=7 burst=15
SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=1.0.0.203 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
wlan0: WMM queue=2 aci=0 acm=0 aifs=2 cWmin=7 cWmax=1023 burst=0
wlan0: WMM queue=3 aci=1 acm=0 aifs=7 cWmin=15 cWmax=1023 burst=0
wlan0: WMM queue=1 aci=2 acm=0 aifs=2 cWmin=7 cWmax=15 burst=30
wlan0: WMM queue=0 aci=3 acm=0 aifs=2 cWmin=3 cWmax=7 burst=15
wlan0: WMM queue=2 aci=0 acm=0 aifs=2 cWmin=7 cWmax=1023 burst=0
wlan0: WMM queue=3 aci=1 acm=0 aifs=7 cWmin=15 cWmax=1023 burst=0
wlan0: WMM queue=1 aci=2 acm=0 aifs=2 cWmin=7 cWmax=15 burst=30
wlan0: WMM queue=0 aci=3 acm=0 aifs=2 cWmin=3 cWmax=7 burst=15
ACPI: PCI interrupt for device 0000:07:06.2 disabled
wlan0: WMM queue=2 aci=0 acm=0 aifs=2 cWmin=7 cWmax=1023 burst=0
wlan0: WMM queue=3 aci=1 acm=0 aifs=7 cWmin=15 cWmax=1023 burst=0
wlan0: WMM queue=1 aci=2 acm=0 aifs=2 cWmin=7 cWmax=15 burst=30
wlan0: WMM queue=0 aci=3 acm=0 aifs=2 cWmin=3 cWmax=7 burst=15
uhci_hcd 0000:00:1d.3: remove, state 4
usb usb5: USB disconnect, address 1
uhci_hcd 0000:00:1d.3: USB bus 5 deregistered
ACPI: PCI interrupt for device 0000:00:1d.3 disabled
uhci_hcd 0000:00:1d.2: remove, state 4
usb usb4: USB disconnect, address 1
uhci_hcd 0000:00:1d.2: USB bus 4 deregistered
ACPI: PCI interrupt for device 0000:00:1d.2 disabled
uhci_hcd 0000:00:1d.1: remove, state 4
usb usb3: USB disconnect, address 1
uhci_hcd 0000:00:1d.1: USB bus 3 deregistered
ACPI: PCI interrupt for device 0000:00:1d.1 disabled
uhci_hcd 0000:00:1d.0: remove, state 4
usb usb1: USB disconnect, address 1
uhci_hcd 0000:00:1d.0: USB bus 1 deregistered
ACPI: PCI interrupt for device 0000:00:1d.0 disabled
wlan0: WMM queue=2 aci=0 acm=0 aifs=2 cWmin=7 cWmax=1023 burst=0
wlan0: WMM queue=3 aci=1 acm=0 aifs=7 cWmin=15 cWmax=1023 burst=0
wlan0: WMM queue=1 aci=2 acm=0 aifs=2 cWmin=7 cWmax=15 burst=30
wlan0: WMM queue=0 aci=3 acm=0 aifs=2 cWmin=3 cWmax=7 burst=15
ACPI: PCI interrupt for device 0000:07:06.3 disabled
pccard: card ejected from slot 0
pccard: PCMCIA card inserted into slot 0
pcmcia: registering new device pcmcia0.0
pcmcia: request for exclusive IRQ could not be fulfilled.
pcmcia: the driver needs updating to supported shared IRQ lines.
pccard: card ejected from slot 0
pccard: PCMCIA card inserted into slot 0
pcmcia: registering new device pcmcia0.0
pcmcia: request for exclusive IRQ could not be fulfilled.
pcmcia: the driver needs updating to supported shared IRQ lines.
SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=1.0.0.203 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44