# ===============================================================
# File: $HOME/.screenrc
# Available: http://www.guckes.net/setup/screenrc
# Purpose: Setup file for program "(GNU) screen"
# written by: Sven Guckes setup-screenrc(at)guckes.net
# Latest change: Sat Jan 03 14:44:41 CET 2004
# Latest user version: screen-4.0.2 [2003-12-05]
# Latest dev version: ----------------- [----------]
# Length and size: 700+ lines and 26K bytes
# ===============================================================
#
# SEE ALSO:
# SCREEN Pages: http://www.guckes.net/screen/
# Bug Reporting: http://www.guckes.net/screen/bugs.php3
# please read this before
# posting to the mailing list - thanks!
#
# MailingList: http://www.guckes.net/screen/mail.php3
# MailingList HomePage: http://www.yahoogroups.com/group/gnu-screen/
#
# ===============================================================
# screen 4.0.1 NEW STUFF
# ===============================================================
# the "idle" command - execute commands after an "idle time".
# example: lock the screen session
# after 420 seconds (seven minutes):
# idle 420 lockscreen
#
# another exmaple: after the "idle timeout" start a ne window
# with a console screen saver ("cmatrix") and (important!)
# reset the idle mechanism - otherwise screen will start a new
# window with cmatrix again after the timeout passes once more..
# idle 6666 eval "screen cmatrix" "idle 0"
#
# CMatrix - a console screensaver by Chris Allegretta chrisa(at)asty.org
# homepage: http://www.asty.org/cmatrix cmatrix 1.2a [2002-03-31]
# download: http://www.asty.org/cmatrix/dist/cmatrix-1.2a.tar.gz
#
# more ideas:
# situation: you are using screen within an xterm on X.
# let "idle" start "xtrlock" (X transparent lock); it simply
# shows a lock icon in the middle of the X screen but other
# than that simply waits for you to enter your password
# while showing the whole screen transparently, that is
# you can still see the xterm with the screen session inside.
# let idle also a script which loops through the windows of
# your screen sessions with eg
# for i in `seq 666`; do
# sleep 10; screen -X next
# done
# adjusting the hardcopy line for this loop
# is left to the reader as an exercise. ;-)
#
# ===============================================================
# ENVIRONMENT
# ===============================================================
# The DISPLAY variable tells programs which display to use.
# This mainly affects programs running on the X server.
# However, when I use screen then I am usually using a terminal -
# and programs do not need to contact the X server.
# This results in programs waiting for some timeout when
# they start up - and this just keeps getting in my way.
# I therefore unset the DISPLAY variable with this command:
## unsetenv DISPLAY
# Text Tools rule! :-)
#
# Note: the command "setenv DISPLAY ''"
# defines the variable DISPLAY to have an empty value.
# but of course it would still *exist*.
# and some programs seem to react to the
# DISPLAY variable even if it is empty.
# so to turn off the effect you *must*
# "unset" the variable.
#
# ===============================================================
# ESCAPE - the COMMAND CHARACTER
# ===============================================================
# escape ^aa # default
# escape ^pp # suggested binding for emacs users
#
# ===============================================================
# STARTUP of programs in an extra window:
# ===============================================================
# Uncomment one/some following lines to automatically let
# SCREEN start some programs in the given window numbers:
# screen -t MAIL 0 mutt
# screen -t EDIT 1 vim
# screen -t GOOGLE 2 links http://www.google.com
# screen -t NEWS 3 slrn
# screen -t WWW 4 links http://www.guckes.net/
#
# ===============================================================
# VARIABLES - Boolean values (on/off)
# ===============================================================
autodetach on # default: on
crlf off # default: off
deflogin off # default: on
# defsilence off # default: off
hardcopy_append on # default: off
# nethack on # default: off
startup_message off # default: on
vbell off # default: ???
#
# ===============================================================
# TERMCAP and TERMINFO
# ===============================================================
#
termcapinfo xterm ti@:te@
#
# termcap xterm 'AF=\E[3%dm:AB=\E[4%dm'
# terminfo xterm 'AF=\E[3%p1%dm:AB=\E[4%p1%dm'
#
# Matthias Kopfermann <matthias_kopfermann(at)gmx.de> [020222]:
# make the cursor show up in red:
termcapinfo linux "ve=\E[?25h\E[?17;0;64c"
#
# David Breach <david(at)davidbreach.co.uk> [2003-10-13]:
# this makes screen work within rxvt on cygwin:
termcapinfo rxvt-cygwin-native ti@:te@
#
# ===============================================================
# VARIABLES - Number values
# ===============================================================
defscrollback 1000 # default: 100
# msgminwait 3 # default: 1
silencewait 15 # default: 30
#
# ===============================================================
# VARIABLES - Paths and Files (esp. programs)
# ===============================================================
# bufferfile: The file to use for commands
# "readbuf" ('<') and "writebuf" ('>'):
# bufferfile $HOME/.screen_exchange
#
# hardcopydir: The directory which contains all hardcopies.
# hardcopydir ~/.hardcopy
# hardcopydir ~/.screen
#
# shell: Default process started in screen's windows.
# Makes it possible to use a different shell inside screen
# than is set as the default login shell. Halleluja! :-)
shell bash
#
# most users will probably use the "bash" as the default shell:
# shell bash
# shell ksh
# shell tcsh
# for an overview to shells see http://georg.f-451.net/shells/
#
# ===============================================================
# VARIABLES - Strings
# ===============================================================
#
# some notes on COLOR before explaining its use in
# the commands caption, hardstatus, and sorendition.
#
# COLOR: colors codes are combinations of
# [attribute modifier] [color description]
# the manual talks of "attribute/color modifiers".
# see the manual, section "STRING ESCAPES".
#
# Color table:
# 0 Black . leave color unchanged
# 1 Red b blue
# 2 Green c cyan
# 3 Brown / yellow d default color
# 4 Blue g green b bold
# 5 Purple k blacK B blinking
# 6 Cyan m magenta d dim
# 7 White r red r reverse
# 8 unused/illegal w white s standout
# 9 transparent y yellow u underline
#
# note: "dim" is not mentioned in the manual.
#
# ===========================================
# CAPTION - shows a "caption" for the window.
# ===========================================
# a "caption" is another line which can show information -
# in addition to the hardstatus line.
#
# use caption to show window list:
# caption always "%{= kc}%?%-Lw%?%{= kY}%n*%f %t%?(%u)%?%{= kc}%?%+Lw%?"
#
# caption always '%{= wb}%50=%n%f %t%{= wb}'
# this basically just shows the current window number and title
# on its own; the "%50=" displays it in the middle of the line.
#
# caption always "%>%{wk}%?%-Lw%?%{bw}%n*%f %t%?(%u)%?%{wk}%?%+Lw%?%<"
# caption always "%-Lw%{= BW}%50>%n%f* %t%{-}%+Lw%<"
# caption always "%?%F%{.RW}%?%3n %t%? [%h]%?"
# caption always "%{rk}%H %{gk}%c %{yk}%M%d %{wk}%?%-Lw%?%{bw}%n*%f %t%?(%u)%?%{wk}%?%+Lw%?"
#
# caption always "%{kG}%?%-Lw%?%{bw}%n*%f %t%?(%u)%?%{kG}%?%+Lw%?"
#
# "push right border: current time with seconds and current date"
# caption always "%=%c:%s %Y-%m-%d"
# ===============================================================
#
# ===============================
# Hardstatus Line and sorendition
# ===============================
# hardstatus: Always show the window list in the last line:
# hardstatus alwayslastline "%w"
# hardstatus alwayslastline "%H %w"
#
# use 'L' between '%' and 'w' to show the flags, too1
# hardstatus alwayslastline "%H %Lw"
#
# example by Adam Spiers <gnu-screen(at)adamspiers.org> :
# *without* colors:
# hardstatus alwayslastline "%?%-Lw%?%n*%f %t%?(%u)%?%?%+Lw%?"
# *with* colors:
#hardstatus alwayslastline "%?%{yk}%-Lw%?%{wb}%n*%f %t%?(%u)%?%?%{yk}%+Lw%?"
#
# This will show the current time and today's date in YYmmdd, too:
# hardstatus alwayslastline " %c | %Y%m%d | %w"
#
# This will show today's date in mmdd and the current time, too:
#hardstatus alwayslastline " %m%d %c | %w"
#
# combining all of these gives:
hardstatus alwayslastline "%{rw}%H%{wk}|%c|%M%d|%?%-Lw%?%{bw}%n*%f %t%?(%u)%?%{wk}%?%+Lw%?"
#
# this uses a black background foreverything execpt for
# the current window which is show on a white background.
# hostname in red, clock in green, date in yellow:
# hardstatus alwayslastline "%{rk}%H %{gk}%c %{yk}%M%d %{wk}%?%-Lw%?%{bw}%n*%f %t%?(%u)%?%{wk}%?%+Lw%?"
#
#
# hardstatus alwayslastline "%{rk}host: %H %33=%{yk}date: %M%d %66=%{gk}time: %c:%s%="
#
# hardstatus alwayslastline "%{rk}host: %H %33=%{yk}date: %M%d %66=%{gk}time: %c%="
#
# no "host:", "date:", or "time:" here.
# instead, the info gets placed at 16%, 50%, and 80% so that it is
# placed soemwhat in the middle of each of the three panels.
# hardstatus alwayslastline "%{RY}%16=%H %33=%{YR}%50=%M%d %66=%{Gb}%80=%c%="
#
# 2003-08-19
# insert the main url of the screen pages:
# hardstatus alwayslastline "%{BW}www.guckes.net/screen/%50=%{RY}host: %H %85=%{YR}%M%d %92=%{Gb}%c%="
#
# 2003-03-26
# use the hardstatus line to show the
# latest news of the IT ticker at heise.de:
# backtick 1 127 0 heise
# hardstatus alwayslastline "%{bw}%1`%= "
#
# note: the use of ANSI color sequences is deprecated.
# please upgrade to (at least) screen 3.9.13
# so you can make use of the color letters/names!
#
# "sorendition": set the colors for
# the "messages" and "text marking"
# (ie text you mark in copy mode):
#
# sorendition 10 99 # default!
# sorendition 02 40 # green on black
# sorendition 02 34 # yellow on blue
# sorendition rw # red on white
sorendition kG # black on bold green
#
#
# ============================
# Password
# ============================
# # # password SZnBqiqMtfa6k
# WARNING!! Do NOT remove the comment
# if you don't know what this does!
# read on:
# this commands sets the *internal*
# password for the screen session.
# if this is set then a "lock" command will
# only let you in to the session after you
# enter the user's account password and then
# also the internal password for that session.
# so this gives additional safety.
# but if you forget the internal password
# then you can also forget about the session - ok?!
#
# ===============================================================
# Messages
# ===============================================================
# There are two kinds of messages: "activity" and "bell"
# They are also the names of the commands that set the
# respective messages. In every message there can be "meta
# strings" which are replaced by values. A meta string starts
# with a percent sign and is then followed by one
# of the following letters: aAcCdDfFhHlmMnstuwWyY
# The meta strings usually refer to the current
# date and time or to a window title or number.
# There are also some specials like embedded branches (with %?),
# color codes (with %{xy}) and padding (with %=, %<, %>).
# you can find their description in the manual in section
# "STRING ESCAPES":
# %% percent sign (the escape character itself)
# %a either 'am' or 'pm' - according to the current time
# %A either 'AM' or 'PM' - according to the current time
# %c current time HH:MM in 24h format
# %C current time HH:MM in 12h format
# %d day number - number of current day
# %D Day's name - the weekday name of the current day
# %f flags of the window
# %F sets %? to true if the window has the focus
# %h hardstatus of the window
# %H hostname of the system
# %l current load of the system
# %m month number
# %M month name
# %n window number
# %s seconds
# %t window title
# %u all other users on this window
# %w all window numbers and names.
# %-w all window numbers up to the current window
# %+w all window numbers after the current window
# %W all window numbers and names except the current one
# %y last two digits of the year number
# %Y full year number
#
# Older versions of screen used a single '%' character
# to display window titles - but since version 3.7 this is
# obsoleted by '%n' and it will vanish in future releases.
# So please update your screenrc to meet this convention!
#
# ===============================================================
# "~" stands for the "bell" character
#
# activity 'Activity in window %n' # default
#
# use %n to display the window number and %t for its title:
# activity "activity in window #%n title: %t~"
#
# activity "activity in window #%n title: %t~"
#
activity "%C -> %n%f %t activity!"
#
# pass on the "beep" (CTRL-G) by adding a '~':
bell "%C -> %n%f %t bell!~"
#
# pow_detach_msg: Message shown when session
# gets power detached.
pow_detach_msg "BYE"
#
# vbell_msg: Message shown when the
# "virtual bell" rings.
vbell_msg " *beep* "
#
# ==============================================================
# BIND bind - defaults
# ==============================================================
# The "bind" command assign keys to (internal) commands
# SCREEN checks all the keys you type; you type the key
# which is known as the "command character" then SCREEN
# eats this key, too, and checks whether this key is
# "bound" to a command. If so then SCREEN will execute it.
#
# The command "bind" allows you to chose which keys
# will be assigned to the commands.
#
# Some commands are bound to several keys -
# usually to both some letter and its corresponding
# control key combination, eg the command
# "(create) screen" is bound to both 'c' and '^C'.
#
# The following list shows the default bindings:
#
# break ^B b
# clear C
# colon :
# copy ^[ [
# detach ^D d
# digraph ^V
# displays *
# dumptermcap .
# fit F
# flow ^F f
# focus ^I
# hardcopy h
# help ?
# history { }
# info i
# kill K k
# lastmsg ^M m
# license ,
# log H
# login L
# meta x
# monitor M
# next ^@ ^N sp n
# number N
# only Q
# other ^X
# pow_break B
# pow_detach D
# prev ^H ^P p ^?
# quit \
# readbuf <
# redisplay ^L l
# remove X
# removebuf =
# reset Z
# screen ^C c
# select " '
# silence _
# split S
# suspend ^Z z
# time ^T t
# title A
# vbell ^G
# version v
# width W
# windows ^W w
# wrap ^R r
# writebuf >
# xoff ^S s
# xon ^Q q
# ^] paste .
# - select -
# 0 select 0
# 1 select 1
# 2 select 2
# 3 select 3
# 4 select 4
# 5 select 5
# 6 select 6
# 7 select 7
# 8 select 8
# 9 select 9
# I login on
# O login off
# ] paste .
#
# ===============================================================
# Key bindings
# ===============================================================
# Remove some default key bindings by binding
# them to "nothing" (empty right-hand-side):
#
# bind . dumptermcap # default
bind .
# bind ^\ quit # default
bind ^\
# bind \\ quit # default
bind \\
# bind h hardcopy # default
# bind h
# bind ^h ??? # default
# bind ^h
# bind } history # default
# bind }
#
# And here are the default bind commands if you need them:
#
# bind A title
# bind C clear
# bind D pow_detach
# bind F fit
# bind H log
# bind I login on
# bind K kill
# bind L login
# bind M monitor
# bind N number
# bind O login off
# bind Q only
# bind S split
# bind W width
# bind X remove
# bind Z reset
#
# ==============================================================
# KEY BINDING FAQ:
# ==============================================================
# FAQ: So many keys are bound to some command already -
# which keys are unbound yet? Which are free for binding?
# A: SCREEN does not have a command to show you
# a table of currently unbound keys - sorry!
# You simply have to read this setup file. ;-)
#
# Summary: Here is a table of the keys
# which are not bound by default:
# unbound: -B--E-G--J-L---P-R-TUV--Y-
# bound: A-CD-F-HI-K-MNO-Q-S---WX-Z
#
# I suggest that you do not change the bindings for
# 'H' ("log") and 'M' ("monitor") as they are *really*
# useful and you might want to use them a lot;
# in this case it is recommended to use
# the defaults to avoid confusion.
# personally, I use 'A' ("title") quite often, too.
#
# If you are using "split windows"
# then you will also use the command
# associated with the keys FQSX a lot, too -
# so do not change their bindings, either!
#
# Anyway, I have bound the unbound uppercase letters
# to start programs in windows directly, ie without
# starting a new window with a shell within first.
# This simply saves shells and thus saves RAM -
# and also avoids that the title of windows is
# the name of your shell. Also, you need not "exit"
# from a shell when you are done with some program.
# And when using "zombie mode" then the window will stay
# and you can resurrect them with the CTRL-SPACE command.
# cool! :-)
#
# enable "zombie mode":
# zombie z
# here the parameter 'z' defines the key
# which makes a zombie window go away.
#
#
# ==============================================================
# BIND and the Services:
# ==============================================================
# I am using the uppercase letters to start programs/services:
#
# the idea:
# bind <key> <command>
# this binds the key to start a windows with <command> inside.
#
# the command "screen" starts a "window" -
# and the default key is 'c' for "create".
# (i know - this *is* confusing at first.)
# with 'screen -t title" you can set a titlestring.
# the number following is the window number to be used.
# if the window number is already taken then
# the least highest available number is used.
#
#
# bind A title # default!
#
# BUUG - Berlin Unix User Group - read some news about Unix
# bind B # unbound by default
# bind B screen -t 'buug' 4 links www.buug.de
bind B screen -t 'BICS' 4 links http://ods.schule.de/bics/inf1/tagung/index.htm
#
# bind C screen -t 'CCC' 9 links http://www.ccc.de/congress/2003/fahrplan/events.de.html
# bind C screen -t 'CCC' 9 links http://www.ccc.de/congress/2003/
# bind C screen -t 'CAMP' 9 links http://www.ccc.de/camp/index.en.html
# bind C screen -t 'CHEM' 9 links 'http://www.tu-chemnitz.de/linux/tag/lt5/vortraege/?print=1'
bind C screen -t 'CHEM' 9 links http://www.tu-chemnitz.de/linux/tag/
# bind C screen -t 'CIT' 9 links http://www.guckes.net/cit/
# bind C screen -t 'CIT' 9 links http://www.computerinfotag.de
# NOTE: This overrides the default binding for the "clear" command.
#
# www.a1.net www.izone.at
# www.one.at
# DICT - Dictionary English<->German
# bind D pow_detach !
bind D screen -t 'DICT' 4 links dict.tu-chemnitz.de
# Note: this overrides the default binding for the
# command "pow_detach". I hardly ever use that one.
#
# MUTT - Email User Agent
# bind E # unbound by default
bind E screen -t 'mail' 0 mutt
# I use email quite a lot - so window #0 is reserved for that.
# see also: http://www.guckes.net/mutt/
#
# FTP - File Transfer "Program"
# bind F fit # default!
# bind F screen -t 'ftp' 9 ncftp
bind F screen -t 'forecast' 4 links http://www.donnerwetter.de/region/suchort.mv?search=10719
# see also: http://www.guckes.net/ncftp/
#
# GOOGLE - Web Search Engine
# bind G # unbound by default
bind G screen -t 'Google' links www.google.com
#
# HEISE - IT NewsTicker
# bind H log # default!
bind H screen -t HeiseTicker links www.heise.de
# bind H screen -t HTL links http://aosc.htlw16.ac.at/lw2003.html
# NOTE: This overrides the default binding of the "hardcopy" command!
#
# IRC - International Relay Chat
# bind I screen -t 'irc' 5 irc
# bind I screen -t 'icq' 9 micq
# see also: http://www.guckes.net/irc/
#
# Feb 2002: Use it to search the Internet Movie DataBase (IMDB):
# bind I screen -t 'IMDB' 9 links http://www.imdb.com/
bind I screen -t 'IMDB' 9 links http://us.imdb.com/search/
# see also: http://www.guckes.net/berlinale/
#
# bind J # unbound by default
#
## bind K kill # default!
bind K
# This *removes* the binding for 'K'
# thus requireing you to enter the
# command via the command line, ie ":kill".
# This prevent accidental killing of your windows.
# Old versions of SCREEN do not prompt for
# confirmation on "killing a window", you see..
#
# LYNX - web browser
# bind L # unbound by default
# bind L screen -t 'lynx' 4 lynx http://www.guckes.net/
# see also: http://www.guckes.net/lynx/
# see also: http://www.guckes.net/links/
# bind L screen -t 'WWW' 4 links http://www.infodrom.org/Debian/events/LinuxTag2003/
# bind L screen -t 'WWW' 4 links http://www.linuxtag.org/2003/de/conferences/conferences.html
# bind L screen -t 'WWW' 4 links http://www.linuxinfotage.de/
# bind L screen -t 'WWW' 4 links http://www.lug-camp-2002.de/programm.html
# bind L screen -t 'WWW' 4 links http://www.mdlug.de/index.php/linuxtag2002/vortraege/v12.inc?menu=0|4|
# bind L screen -t 'WWW' 4 links http://www.mdlug.de/index.php/linuxtag2002/programm.inc?menu=0|4|&nomfc=1
# bind L screen -t 'WWW' 4 links http://www.infodrom.org/Debian/events/LinuxTag2002/workshop.php3?room=WS+2&day=2002-06-07&time=16:00
# bind L screen -t 'WWW' 4 links http://www.guckes.net/linuxtag2002/
# bind L screen -t 'WWW' 4 links http://www.guckes.net/
bind L screen -t 'LT-DRESDEN' 4 links http://www.linuxinfotag.de/
#
bind M monitor # default!
# bind M screen -t MD 9 links 'http://www.mdlug.info/linuxtag2003/index.php?option=linuxtag&Itemid=52'
#
# Nepal:
# bind N screen -t 'Nepal' links http://www.wunderground.com/global/stations/44454.html
# Berlin, Tegel Airport:
bind N screen -t 'Wetter' links http://www.wunderground.com/global/stations/10382.html
#
# Paste - use 'P' instead of ']':
# bind P # unbound by default
bind P paste .
# The character ']' is hard to type on german keyboards,
# as it requires the use of a yet another meta character "AltGR".
# I prefer to use 'P' for "paste" because it is a letter
# which is available at the same position both with the
# US keyboards and keyboards with "Kraut layout" -
# which I call" Krautboards", by the way. ;-)
# bind ] paste . # default!
#
# Register page at NetMind's Service:
# bind R # unbound by default
bind R screen links http://www.netmind.com/URL-minder/new/register.html
#
#
# SLRN - newsreader
bind S screen -t 'slrn' 3 slrn -n -C -k0
# bind S screen -t 'SED' 3 links http://www.guckes.net/sed/
# see also:
# http://www.slrn.org ----->
# http://slrn.sourceforge.net
# http://www.guckes.net/slrn/ (old)
#
# bind T # unbound by default
bind T screen -t TRASH ssh trash
#
# bind U # unbound by default
# bind U screen
# bind U screen -t 'Unterk' 4 links http://www.infodrom.org/Debian/events/LinuxTag2003/
# VIM - editor
# bind V # unbound by default
bind V screen -t 'vim' 1 vim -X
# Editing comes with email quite naturally -
# so I have reserved window #1 for this.
# http://www.guckes.net/vim/
#
# W - WIEN!
# bind W screen -t 'WIEN' 4 links http://www.linuxwochen.at/cgi-bin/index?topic=Wien&print=yes
# bind W screen -t 'WIEN' 4 links http://wien.linuxwochen.at/
# bind W screen -t 'WIKI' 4 links http://linuxwiki.org/LinuxTag2003_2fFahrGemeinschaften
# bind W screen -t WETTER 4 links http://www.wetteronline.de
# bind W screen -t WETTER 4 links http://www.wetteronline.de/Mecklenb-Vorp/MecklSeen.htm
bind W screen -t WETTER 4 links http://www.wetteronline.de/cgi-bin/citybild?PLZ=01099&PLZN=Dresden
#
# W - Webster
# bind W screen -t WEBSTER 4 links http://www.m-w.com/
bind W screen -t NEWS slrn -h news.hostsharing.net
#
# X - a fast way to lock the current screen.
bind X lockscreen
#
# bind Y exec !!! echo -n http://www.guckes.net/
bind Y stuff http://www.guckes.net/
# This pastes the address of my homepage to the process
# in the current window. very nice - saves some typing.
# and you don't have to have the functionality of
# "abbreviating" in the processes themselves. :-)
#
#
bind Z screen -t HOME links http://www.guckes.net/
# ===============================================================
# BIND Examples:
# ===============================================================
# You can also paste the values of
# SCREEN's environment variables:
# bind E stuff $EMAIL
# bind U stuff $URL
# bind I stuff $ICQ
#
# ===============================================================
# BINDKEY:
# ===============================================================
# [TODO briefly explain the difference between BIND and BINDKEY]
#
# use the PgUp and PgDn keys to enter copy mode
# and page through the window backlog:
# bindkey -k kP copy
#
# Use the function keys F7 and F8
# to cycle backwards/forwards in
# the list of existing windows:
bindkey -k k7 prev
bindkey -k k8 next
#
# make the "kb" send a backspace (CTRL-H:)
# bindkey -d kb stuff ^H
# WARNING: this does not work as advertised.
# it eats the "kb" when typing "dankbar" for example. :-(
#
# NumPad keybindings:
# ^[Oo / resize =
# ^[Oj * resize max
# ^[Om - resize -2
# ^[Ok + resize +2
# ^[OM Enter
#
# ================================
# At the very end... show the
# current version and say hello :-)
#
# Briefly show the version number of this starting
# screen session - but only for *one* second:
msgwait 1
version
# change back to showing messages
# for duration of two seconds:
msgwait 2
#
# Welcome the user:
echo "welcome to screen :-)"
#
# !THPXRF!
# Tell Vim to use a "tabstop" of '8',
# ie expands TABs to the next column
# whose number is a multiple of eight.
# vim: ts=8 et nowrap