rendered paste bodyModule Size Used by
ivtv 174608 0
v4l1_compat 12676 1 ivtv
bttv 153460 0
video_buf 18948 1 bttv
ir_common 23556 1 bttv
compat_ioctl32 1280 1 bttv
btcx_risc 3976 1 bttv
tveeprom 12944 2 ivtv,bttv
videodev 6912 2 ivtv,bttv
snd_pcm_oss 34080 0
snd_mixer_oss 14336 1 snd_pcm_oss
snd_intel8x0 26524 0
snd_ac97_codec 80544 1 snd_intel8x0
snd_ac97_bus 2048 1 snd_ac97_codec
snd_pcm 68744 3 snd_pcm_oss,snd_intel8x0,snd_ac97_codec
snd_timer 18436 1 snd_pcm
snd 41828 6 snd_pcm_oss,snd_mixer_oss,snd_intel8x0,snd_ac97_codec,snd_pcm,snd_timer
snd_page_alloc 7560 2 snd_intel8x0,snd_pcm
cx25840 21136 0
tda9887 15632 0
tuner 48428 0
v4l2_common 13568 2 bttv,tuner
firmware_class 7424 3 ivtv,bttv,cx25840
wlan_tkip 10752 3
wlan_scan_sta 11648 1
ath_pci 76324 0
ath_rate_sample 9728 1 ath_pci
wlan 160092 5 wlan_tkip,wlan_scan_sta,ath_pci,ath_rate_sample
ath_hal 189264 3 ath_pci,ath_rate_sample
Linux video capture interface: v1.00
bttv: driver version 0.9.16 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.7.0 (tagged release) loading
ivtv: Linux version: 2.6.17 preempt mod_unload PENTIUM4 gcc-3.3
ivtv: In case of problems please include the debug info between
ivtv: the START INIT IVTV and END INIT IVTV lines, along with
ivtv: any module options, when mailing the ivtv-users mailinglist.
ivtv0: Unknown card: vendor/device: 4444/0016
ivtv0: subsystem vendor/device: 104d/801d
ivtv0: cx23416 based
ivtv0: Defaulting to Hauppauge WinTV PVR-150 card
ivtv0: Please mail the vendor/device and subsystem vendor/device IDs and what kind of
ivtv0: card you have to the ivtv-devel mailinglist (www.ivtvdriver.org)
ivtv0: Prefix your subject line with [UNKNOWN CARD].
ACPI: PCI Interrupt 0000:02:05.0[A] -> Link [LNKB] -> GSI 3 (level, low) -> IRQ 3
tveeprom 4-0050: Encountered bad packet header [aa]. Corrupt or not a Hauppauge eeprom.
ivtv0: No tuner detected, default to NTSC
ivtv0: Failed to load module wm8775
ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
ivtv0: Encoder revision: 0x02050032
ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total)
ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total)
ivtv0: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total)
ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total)
ivtv0: i2c hardware 0x00000001 not found for command 0xc008561c!
ivtv0: i2c addr 0x44 not found for command 0x4008646f!
ivtv0: i2c hardware 0x00000020 not found for command 0x4008646d!
ivtv0: i2c hardware 0x00000001 not found for command 0x4008646d!
ivtv0: i2c hardware 0x00000001 not found for command 0xc008561c!
ivtv0: i2c hardware 0x00000001 not found for command 0xc008561c!
ivtv0: i2c hardware 0x00000001 not found for command 0xc008561c!
ivtv0: Initialized Hauppauge WinTV PVR-150, card #0
ivtv: ==================== END INIT IVTV ====================