rendered paste bodyRQ 11 for device 01:00.0
PCI: Sharing IRQ 11 with 00:0d.0
PCI: Sharing IRQ 11 with 00:0d.1
[fglrx] module loaded - fglrx 8.12.10 [Apr 4 2005] on minor 0
[drm] Initialized radeon 1.7.0 20020828 on minor 1
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,4), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
PCI: Found IRQ 4 for device 00:11.5
IRQ routing conflict for 00:11.5, have irq 5, want irq 4
PCI: Setting latency timer of device 00:11.5 to 64
ALSA ../alsa-kernel/pci/via82xx.c:582: codec_read: codec 0 is not valid [0x87e5370]
ALSA ../alsa-kernel/pci/via82xx.c:582: codec_read: codec 0 is not valid [0x87e5370]
ALSA ../alsa-kernel/pci/via82xx.c:582: codec_read: codec 0 is not valid [0x87e5370]
ALSA ../alsa-kernel/pci/via82xx.c:582: codec_read: codec 0 is not valid [0x87e5370]
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
PCI: Found IRQ 3 for device 00:10.3
IRQ routing conflict for 00:10.0, have irq 4, want irq 3
IRQ routing conflict for 00:10.1, have irq 4, want irq 3
IRQ routing conflict for 00:10.2, have irq 4, want irq 3
IRQ routing conflict for 00:10.3, have irq 4, want irq 3
ehci_hcd 00:10.3: VIA Technologies, Inc. USB 2.0
ehci_hcd 00:10.3: irq 4, pci mem e0bd0000
usb.c: new USB bus registered, assigned bus number 1
ehci_hcd 00:10.3: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29/2.4
hub.c: USB hub found
hub.c: 6 ports detected
uhci.c: USB Universal Host Controller Interface driver v1.1
PCI: Found IRQ 3 for device 00:10.0
IRQ routing conflict for 00:10.0, have irq 4, want irq 3
IRQ routing conflict for 00:10.1, have irq 4, want irq 3
IRQ routing conflict for 00:10.2, have irq 4, want irq 3
IRQ routing conflict for 00:10.3, have irq 4, want irq 3
uhci.c: USB UHCI at I/O 0xb400, IRQ 4
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Found IRQ 3 for device 00:10.1
IRQ routing conflict for 00:10.0, have irq 4, want irq 3
IRQ routing conflict for 00:10.1, have irq 4, want irq 3
IRQ routing conflict for 00:10.2, have irq 4, want irq 3
IRQ routing conflict for 00:10.3, have irq 4, want irq 3
uhci.c: USB UHCI at I/O 0xb000, IRQ 4
usb.c: new USB bus registered, assigned bus number 3
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Found IRQ 3 for device 00:10.2
IRQ routing conflict for 00:10.0, have irq 4, want irq 3
IRQ routing conflict for 00:10.1, have irq 4, want irq 3
IRQ routing conflict for 00:10.2, have irq 4, want irq 3
IRQ routing conflict for 00:10.3, have irq 4, want irq 3
uhci.c: USB UHCI at I/O 0xa800, IRQ 4
usb.c: new USB bus registered, assigned bus number 4
hub.c: USB hub found
hub.c: 2 ports detected
Linux video capture interface: v1.00
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-algo-bit.o: i2c bit algorithm module
bttv: driver version 0.7.108 loaded
bttv: using 4 buffers with 2080k (8320k total) for capture
bttv: Bt8xx card found (0).
PCI: Enabling device 00:0d.0 (0004 -> 0006)
PCI: Found IRQ 11 for device 00:0d.0
PCI: Sharing IRQ 11 with 00:0d.1
PCI: Sharing IRQ 11 with 01:00.0
bttv0: Bt878 (rev 17) at 00:0d.0, irq: 11, latency: 32, mmio: 0xd7800000
bttv0: using: *** UNKNOWN/GENERIC *** [card=0,autodetected]
i2c-core.o: adapter bt848 #0 registered as adapter 0.
bttv: readee error
bttv0: using tuner=-1
bttv0: i2c: checking for MSP34xx @ 0x80... not found
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
bttv0: registered device video0
bttv0: registered device vbi0
8139too Fast Ethernet driver 0.9.26
PCI: Enabling device 00:0b.0 (0004 -> 0007)
PCI: Assigned IRQ 9 for device 00:0b.0
eth0: RealTek RTL8139 at 0xe0c19000, 00:e0:7d:c7:bd:3e, IRQ 9
eth0: Identified 8139 chip type 'RTL-8139C'
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.5
hub.c: new USB device 00:10.0-1, assigned address 2
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
usb.c: USB device 2 (vend/prod 0x3f0/0x7304) is not claimed by any active driver.
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.5
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.5
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.5
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.5
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.5
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.5
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.5
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.5
usb.c: registered new driver usblp
printer.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x03F0 pid 0x7304
printer.c: v0.13: USB Printer Device Class driver
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.5
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.5
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.5
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.5
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.5
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
parport0: irq 7 detected
lp0: using parport0 (polling).
Fire GL built-in AGP-support
Based on agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: Detected a Via Apollo KT400 chipset in AGP v3 mode at 00:00.0
agpgart: AGP aperture is 128M @ 0xf0000000
Power management callback for AGP chipset installed
[fglrx] AGP detected, AgpState = 0x1f000a0b (hardware caps of chipset)
AGP: Found 2 AGPv3 devices
AGP: Doing enable for AGPv3
agpgart: Found an AGP 3.5 compliant device.
[fglrx] AGP enabled, AgpCommand = 0x1f000302 (selected caps)
[fglrx] free AGP = 121909248
[fglrx] max AGP = 121909248
[fglrx] free LFB = 122679296
[fglrx] max LFB = 122679296
[fglrx] free Inv = 0
[fglrx] max Inv = 0
[fglrx] total Inv = 0
[fglrx] total TIM = 0
[fglrx] total FB = 0
[fglrx] total AGP = 32768
bttv0: unloading
i2c-core.o: adapter unregistered: bt848 #0
bttv: driver version 0.7.108 loaded
bttv: using 4 buffers with 2080k (8320k total) for capture
bttv: Bt8xx card found (0).
PCI: Found IRQ 11 for device 00:0d.0
PCI: Sharing IRQ 11 with 00:0d.1
PCI: Sharing IRQ 11 with 01:00.0
bttv0: Bt878 (rev 17) at 00:0d.0, irq: 11, latency: 32, mmio: 0xd7800000
bttv0: using: Prolink Pixelview PV-BT878P+9B (PlayTV Pro rev.9B FM+NICAM) [card=72,insmod option]
i2c-core.o: adapter bt848 #0 registered as adapter 0.
bttv0: using tuner=43
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
tvaudio: TV audio decoder + audio/video mux driver
tvaudio: known chips: tda9840,tda9873h,tda9874h/a,tda9850,tda9855,tea6300,tea6420,tda8425,pic16c54 (PV951),ta8874z
i2c-core.o: driver generic i2c audio driver registered.
i2c-core.o: driver i2c TV tuner driver registered.
tuner: chip found @ 0xc2
i2c-core.o: client [(tuner unset)] registered to adapter [bt848 #0](pos. 0).
bttv0: PLL: 28636363 => 35468950 .. ok
bttv0: registered device video0
bttv0: registered device vbi0
bttv0: registered device radio0
tuner: tuner type not set
tuner: tuner type not set
tuner: tuner type not set
bttv0: unloading
i2c-core.o: client [(tuner unset)] unregistered.
i2c-core.o: adapter unregistered: bt848 #0
i2c-core.o: driver unregistered: i2c TV tuner driver
i2c-core.o: driver unregistered: generic i2c audio driver
Linux video capture interface: v1.00
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-algo-bit.o: i2c bit algorithm module
bttv: driver version 0.7.108 loaded
bttv: using 4 buffers with 2080k (8320k total) for capture
bttv: Bt8xx card found (0).
PCI: Found IRQ 11 for device 00:0d.0
PCI: Sharing IRQ 11 with 00:0d.1
PCI: Sharing IRQ 11 with 01:00.0
bttv0: Bt878 (rev 17) at 00:0d.0, irq: 11, latency: 32, mmio: 0xd7800000
bttv0: using: Prolink Pixelview PV-BT878P+9B (PlayTV Pro rev.9B FM+NICAM) [card=72,insmod option]
bttv0: using tuner=43
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
tvaudio: TV audio decoder + audio/video mux driver
tvaudio: known chips: tda9840,tda9873h,tda9874h/a,tda9850,tda9855,tea6300,tea6420,tda8425,pic16c54 (PV951),ta8874z
tuner: chip found @ 0xc2
bttv0: PLL: 28636363 => 35468950 .. ok
bttv0: registered device video0
bttv0: registered device vbi0
bttv0: registered device radio0
tuner: tuner type not set
tuner: tuner type not set
bttv0: PLL can sleep, using XTAL (28636363).
tuner: tuner type not set