rendered paste body] (IRQs 3 4 5 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 7 10 11 12 14 15)
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
Bluetooth: Core ver 2.8
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
PCI: Bridge: 0000:00:01.0
IO window: 9000-9fff
MEM window: ec000000-ec0fffff
PREFETCH window: e0000000-e7ffffff
PCI: Bridge: 0000:00:1e.0
IO window: a000-afff
MEM window: ec100000-ec1fffff
PREFETCH window: 30000000-300fffff
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 16384 bind 8192)
TCP reno registered
Machine check exception polling timer started.
* This chipset may have PM-Timer Bug. Due to workarounds for a bug,
* this time source is slow. If you are sure your timer does not have
* this bug, please use "pmtmr_good" to disable the workaround
NTFS driver 2.1.27 [Flags: R/W DEBUG].
fuse init (API version 7.6)
Initializing Cryptographic API
io scheduler noop registered
io scheduler cfq registered (default)
lp: driver loaded but no devices found
Real Time Clock Driver v1.12ac
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
[drm] Initialized drm 1.0.1 20051102
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[drm] Initialized radeon 1.24.0 20060225 on minor 0
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
radeonfb: Found Intel x86 BIOS ROM Image
radeonfb: Retrieved PLL infos from BIOS
radeonfb: Reference=27.00 MHz (RefDiv=12) Memory=250.00 Mhz, System=200.00 MHz
radeonfb: PLL min 20000 max 35000
radeonfb: Monitor 1 type CRT found
radeonfb: EDID probed
radeonfb: Monitor 2 type no found
Console: switching to colour frame buffer device 128x48
radeonfb (0000:01:00.0): ATI Radeon If
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
parport0: irq 7 detected
lp0: using parport0 (polling).
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
loop: loaded (max 8 devices)
plip: parport0 has no IRQ. Using IRQ-less mode,which is fairly inefficient!
NET3 PLIP version 2.4-parport gniibe@mri.co.jp
plip0: Parallel port at 0x378, not using IRQ.
ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 17 (level, low) -> IRQ 17
3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
0000:02:01.0: 3Com PCI 3c905C Tornado at e0802000.
e100: Intel(R) PRO/100 Network Driver, 3.5.10-k2-NAPI
e100: Copyright(c) 1999-2005 Intel Corporation
PPP generic driver version 2.4.2
NET: Registered protocol family 24
SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
CSLIP: code copyright 1989 Regents of the University of California.
SLIP linefill/keepalive option.
ipddp.c:v0.01 8/28/97 Bradford W. Johnson <johns393@maroon.tc.umn.edu>
ipddp0: Appletalk-IP Encap. mode by Bradford W. Johnson <johns393@maroon.tc.umn.edu>
Linux video capture interface: v1.00
saa7130/34: v4l2 driver version 0.2.14 loaded
ACPI: PCI Interrupt 0000:02:05.0[A] -> GSI 18 (level, low) -> IRQ 18
saa7130[0]: found at 0000:02:05.0, rev: 1, irq: 18, latency: 32, mmio: 0xec122000
saa7130[0]: subsystem: 5168:0138, board: LifeView/Typhoon FlyVIDEO2000 [card=3,autodetected]
saa7130[0]: board init: gpio is 38500
saa7130[0]: there are different flyvideo cards with different tuners
saa7130[0]: out there, you might have to use the tuner=<nr> insmod
saa7130[0]: option to override the default value.
input: saa7134 IR (LifeView/Typhoon Fl as /class/input/input0
saa7130[0]: i2c eeprom 00: 68 51 38 01 10 28 ff ff ff ff ff ff ff ff ff ff
saa7130[0]: i2c eeprom 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7130[0]: i2c eeprom 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7130[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7130[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7130[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7130[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7130[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7130[0]: registered device video0 [v4l2]
saa7130[0]: registered device vbi0
saa7130[0]: registered device radio0
tuner 4-0061: chip found @ 0xc2 (saa7130[0])
tuner 4-0061: type set to 37 (LG PAL (newer TAPC series))
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH4: IDE controller at PCI slot 0000:00:1f.1
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
ICH4: chipset revision 1
ICH4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:DMA
Probing IDE interface ide0...
hda: SAMSUNG SP8004H, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdd: Hewlett-Packard DVD Writer 200, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 156368016 sectors (80060 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
hda: cache flushes supported
hda: hda1 hda2 hda3 hda4
hdd: ATAPI 32X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
PCI: cache line size of 128 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 19, io mem 0xec200000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000b800
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 20, io base 0x0000b000
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b400
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usb 1-6: new high speed USB device using ehci_hcd and address 3
usb 1-6: configuration #1 chosen from 1 choice
usb 3-2: new low speed USB device using uhci_hcd and address 2
usb 3-2: configuration #1 chosen from 1 choice
usbcore: registered new driver cdc_acm
drivers/usb/class/cdc-acm.c: v0.25:USB Abstract Control Model driver for USB modems and ISDN adapters
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Initializing USB Mass Storage driver...
scsi0 : SCSI emulation for USB Mass Storage devices
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
usbcore: registered new driver libusual
input: Logitech USB Receiver as /class/input/input1
input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.1-2
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
i2c /dev entries driver
Bluetooth: HCI USB driver ver 2.9
usbcore: registered new driver hci_usb
Bluetooth: Virtual HCI driver ver 1.2
Bluetooth: HCI UART driver ver 2.2
Bluetooth: HCI H4 protocol initialized
Bluetooth: HCI BCSP protocol initialized
Bluetooth: Broadcom Blutonium firmware driver ver 1.0
usbcore: registered new driver bcm203x
Bluetooth: Digianswer Bluetooth USB driver ver 0.8
usbcore: registered new driver bpa10x
Bluetooth: BlueFRITZ! USB driver ver 1.1
usbcore: registered new driver bfusb
Advanced Linux Sound Architecture Driver Version 1.0.11rc4 (Wed Mar 22 10:27:24 2006 UTC).
ALSA device list:
No soundcards found.
IPv4 over IPv4 tunneling driver
GRE over IPv4 tunneling driver
ip_conntrack version 2.4 (4095 buckets, 32760 max) - 172 bytes per conntrack
ip_tables: (C) 2000-2006 Netfilter Core Team
usb 3-1: new low speed USB device using uhci_hcd and address 3
TCP bic registered
TCP cubic registered
TCP westwood registered
TCP highspeed registered
TCP hybla registered
TCP htcp registered
TCP vegas registered
TCP scalable registered
NET: Registered protocol family 1
NET: Registered protocol family 10
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
usb 3-1: configuration #1 chosen from 1 choice
input: CHICONY Keyboard NT68P81 as /class/input/input2
input: USB HID v1.00 Keyboard [CHICONY Keyboard NT68P81] on usb-0000:00:1d.1-1
Bridge firewalling registered
NET: Registered protocol family 4
NET: Registered protocol family 5
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO (Voice Link) ver 0.5
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.7
Bluetooth: BNEP (Ethernet Emulation) ver 1.2
Bluetooth: BNEP filters: protocol multicast
Bluetooth: HIDP (Human Interface Emulation) ver 1.1
NET4: DECnet for Linux: V.2.5.68s (C) 1995-2003 Linux DECnet Project Team
DECnet: Routing cache hash table of 1024 buckets, 8Kbytes
NET: Registered protocol family 12
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
SCTP: Hash tables configured (established 16384 bind 32768)
Using IPI Shortcut mode
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting. Commit interval 5 seconds
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 176k freed
EXT3 FS on hda1, internal journal
Vendor: Model: disgo Rev: 1.02
Type: Direct-Access ANSI SCSI revision: 00
SCSI device sda: 989184 512-byte hdwr sectors (506 MB)
sda: Write Protect is off
sda: Mode Sense: 23 00 00 00
sda: assuming drive cache: write through
SCSI device sda: 989184 512-byte hdwr sectors (506 MB)
sda: Write Protect is off
sda: Mode Sense: 23 00 00 00
sda: assuming drive cache: write through
sda: sda1
sd 0:0:0:0: Attached scsi removable disk sda
sd 0:0:0:0: Attached scsi generic sg0 type 0
usb-storage: device scan complete
snd_page_alloc: exports duplicate symbol snd_dma_alloc_pages (owned by kernel)
snd: exports duplicate symbol snd_major (owned by kernel)
snd_timer: Unknown symbol snd_verbose_printk
snd_timer: Unknown symbol snd_oss_info_register
snd_pcm: Unknown symbol snd_verbose_printk
snd_ac97_bus: exports duplicate symbol ac97_bus_type (owned by kernel)
snd_ac97_codec: Unknown symbol snd_verbose_printk
snd_intel8x0: Unknown symbol snd_verbose_printk
EXT2-fs warning (device hda4): ext2_fill_super: mounting ext3 filesystem as ext2
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda2, internal journal
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
snd_page_alloc: exports duplicate symbol snd_dma_alloc_pages (owned by kernel)
snd: exports duplicate symbol snd_major (owned by kernel)
snd_timer: Unknown symbol snd_verbose_printk
snd_timer: Unknown symbol snd_oss_info_register
snd_pcm: Unknown symbol snd_verbose_printk
snd_ac97_bus: exports duplicate symbol ac97_bus_type (owned by kernel)
snd_ac97_codec: Unknown symbol snd_verbose_printk
snd_intel8x0: Unknown symbol snd_verbose_printk
snd: exports duplicate symbol snd_major (owned by kernel)
snd_timer: Unknown symbol snd_verbose_printk
snd_timer: Unknown symbol snd_oss_info_register
snd_seq: Unknown symbol snd_verbose_printk
snd_seq_midi_event: exports duplicate symbol snd_midi_event_new (owned by kernel)
snd_seq_device: Unknown symbol snd_verbose_printk
snd_seq_oss: Unknown symbol snd_unregister_oss_device
snd_seq_oss: Unknown symbol snd_verbose_printk
snd_seq_oss: Unknown symbol snd_register_oss_device
snd_seq_oss: Unknown symbol snd_oss_info_register
snd: exports duplicate symbol snd_major (owned by kernel)
snd_mixer_oss: Unknown symbol snd_unregister_oss_device
snd_mixer_oss: Unknown symbol snd_verbose_printk
snd_mixer_oss: Unknown symbol snd_register_oss_device
snd_mixer_oss: Unknown symbol snd_mixer_oss_notify_callback
snd_mixer_oss: Unknown symbol snd_oss_info_register
snd_mixer_oss: Unknown symbol snd_lookup_oss_minor_data
snd_page_alloc: exports duplicate symbol snd_dma_alloc_pages (owned by kernel)
snd_timer: Unknown symbol snd_verbose_printk
snd_timer: Unknown symbol snd_oss_info_register
snd_pcm: Unknown symbol snd_verbose_printk
snd_pcm_oss: Unknown symbol snd_unregister_oss_device
snd_pcm_oss: Unknown symbol snd_verbose_printk
snd_pcm_oss: Unknown symbol snd_register_oss_device
snd_pcm_oss: Unknown symbol snd_mixer_oss_ioctl_card
snd_pcm_oss: Unknown symbol snd_oss_info_register
snd_pcm_oss: Unknown symbol snd_lookup_oss_minor_data
snd: exports duplicate symbol snd_major (owned by kernel)
snd_mixer_oss: Unknown symbol snd_unregister_oss_device
snd_mixer_oss: Unknown symbol snd_verbose_printk
snd_mixer_oss: Unknown symbol snd_register_oss_device
snd_mixer_oss: Unknown symbol snd_mixer_oss_notify_callback
snd_mixer_oss: Unknown symbol snd_oss_info_register
snd_mixer_oss: Unknown symbol snd_lookup_oss_minor_data
snd: exports duplicate symbol snd_major (owned by kernel)
snd_timer: Unknown symbol snd_verbose_printk
snd_timer: Unknown symbol snd_oss_info_register
snd_seq: Unknown symbol snd_verbose_printk
ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 17 (level, low) -> IRQ 17
eth0: setting full-duplex.
dummy0: no IPv6 routers present
eth0: no IPv6 routers present