All pastes #10885 Raw Edit

dgram2

public text v1 · immutable
#10885 ·published 2005-05-04 10:24 UTC
rendered paste body
#
# cardctl eject;cardctl insert
# dmesg
Linux version 2.4.18-rmk7-pxa3-embedix-3.5.3 (mickey@r2d2) (gcc version 2.95.3 20010315 (release)) #1 Sat, 09 Apr 2005 20:26:07 +0200
CPU: Intel XScale-PXA255 revision 6
Machine: SHARP Poodle
Memory clock: 99.53MHz (*27)
Run Mode clock: 199.07MHz (*2)
Turbo Mode clock: 398.13MHz (*2.0, active)
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: mtdparts=sharpsl-nand:7168k@0k(smf),22528k@7168k(root),-(home) root=/dev/mtdblock2 rootfstype=jffs2 jffs2_orphaned_inodes=delete console=ttyS0
GA Chip: L1
Console: colour dummy device 80x30
Calibrating delay loop... 397.31 BogoMIPS
Memory: 32MB = 32MB total
Memory: 25820KB available (1738K code, 470K data, 84K init)
Dentry-cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode-cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
RCSR = 2
apm: BIOS version 1.2 Flags 0x02 (Driver version 1.14)
batok installed
Starting kswapd
JFFS2 version 2.1. (C) 2001, 2002 Red Hat, Inc., designed by Axis Communications AB.
Console: switching to colour frame buffer device 60x53
get comadj 125
keyboard initilaized.
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with no serial options enabled
SharpSL serial driver version 5.05c (2001-07-08) with no serial options enabled
ttyS00 at 0xf8100000x (irq = 14) is a 16550A
ttyS01 at 0xf8700000x (irq = 12) is a 16550A, using IRDA
ttyS02 at 0xf8200000x (irq = 13) is a 16550A
rs_init: IRDA H/W initializaion
sharpled_init: done.
Cotulla Real Time Clock driver v1.00
Cotulla Touch Screen driver initialized
block: 64 slots per queue, batch=16
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
loop: loaded (max 8 devices)
PPP generic driver version 2.4.1
PPP BSD Compression module registered
ide-cs.c 1.26 1999/11/16 02:10:49 (David Hinds)
Poodle audio driver initialize
Sharp SL series flash device: 1000000 at 0
Using static partision definition
Creating 1 MTD partitions on "sharpsl-flash":
0x00120000-0x007f0000 : "Filesystem"
NAND device: Manufacture ID: 0x98, Chip ID: 0x76 (Toshiba TH58512FT)
Creating 3 MTD partitions on "Toshiba TH58512FT":
0x00000000-0x00700000 : "smf"
0x00700000-0x01d00000 : "root"
0x01d00000-0x04000000 : "home"
Linux Kernel Card Services 3.1.22
  options:  [pm]
Intel PXA250/210 PCMCIA (CS release 3.1.22)
pxa_pcmcia_init(0)
pxa_pcmcia_init(1)
Frontlight Driver Initialized.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 2048)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NetWinder Floating Point Emulator V0.95 (c) 1998-1999 Rebel.com
IrCOMM protocol (Dag Brattli)
RAMDISK: Couldn't find valid RAM disk image starting at 0.
Freeing initrd memory: 4096K
VFS: Mounted root (jffs2 filesystem).
Freeing init memory: 84K
Warning: unable to open an initial console.
usbdcore: usbdcore 0.1 035 2002-06-12 20:00 (dbg="")
net_fd 0.1 035 2002-06-12 20:00 (dbg="",alwaysup=0,OUT=64,IN=64)
vendorID: 4dd productID: 8006
pxa_bi 0.1-alpha 035 2002-06-12 20:00 (dbg="")
bi_modinit: call udc_startup_events
bi_device_event: call udc_enable
bi_device_event: call udc_all_interrupts
jffs2_scan_inode_node(): Data CRC failed on node at 0x01107900: Read 0x60ea8307, calculated 0x77defd9a
[SD]-clustsize = 4000
Partition check:
 mmcda: mmcda1
SD Driver Initialized.
sharp_mmcsd 0.21 27 Sep 2002
netproto_recv: not up net_dev->flags: 1002
netproto_recv: not up net_dev->flags: 1002
VFS: Disk change detected on device mmcd(60,1)
 mmcda: mmcda1
netproto_recv: not up net_dev->flags: 1002
VFS: Disk change detected on device mmcd(60,1)
 mmcda: mmcda1
VFS: Can't find a Minix or Minix V2 filesystem on device 3c:01.
VFS: Disk change detected on device mmcd(60,1)
 mmcda: mmcda1
VFS: Disk change detected on device mmcd(60,1)
 mmcda: mmcda1
MSDOS FS: IO charset utf8
netproto_recv: not up net_dev->flags: 1002
netproto_recv: not up net_dev->flags: 1002
netproto_recv: not up net_dev->flags: 1002
netproto_recv: not up net_dev->flags: 1002
IrDA: Registered device irda0
ttyS03 at port 0xf6000400 (irq = 39) is a 16C950/954
BlueZ Core ver 2.4 Copyright (C) 2000,2001 Qualcomm Inc
Written 2000,2001 by Maxim Krasnyansky <maxk@qualcomm.com>
BlueZ L2CAP ver 2.3 Copyright (C) 2000,2001 Qualcomm Inc
Written 2000,2001 by Maxim Krasnyansky <maxk@qualcomm.com>
BlueZ RFCOMM ver 1.1
Copyright (C) 2002 Maxim Krasnyansky <maxk@qualcomm.com>
Copyright (C) 2002 Marcel Holtmann <marcel@holtmann.org>
pxa_pcmcia_init(0)
tty03 unloaded
ttyS03 at port 0xf6000400 (irq = 39) is a 16C950/954
start check battery !
tty03 unloaded
pxa_pcmcia_init(0)
ttyS03 at port 0xf6000400 (irq = 39) is a 16C950/954
#