rendered paste body!!################################
!!ALSA Information Script v 0.4.48
!!################################
!!Script ran on: Mon Jul 28 12:41:08 MDT 2008
!!Linux Distribution
!!------------------
Ubuntu 8.04.1 \n \l DISTRIB_ID=Ubuntu DISTRIB_DESCRIPTION="Ubuntu 8.04.1"
!!Kernel Information
!!------------------
Kernel release: 2.6.24-20-generic
Operating System: GNU/Linux
Architecture: i686
Processor: unknown
SMP Enabled: Yes
!!ALSA Version
!!------------
Driver version: 1.0.16
Library version:
Utilities version: 1.0.15
!!Loaded ALSA modules
!!-------------------
!!Soundcards recognised by ALSA
!!-----------------------------
--- no soundcards ---
!!PCI Soundcards installed in the system
!!--------------------------------------
00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 01)
!!Advanced information - PCI Vendor/Device/Susbsystem ID's
!!--------------------------------------------------------
00:1f.5 0401: 8086:24c5 (rev 01)
Subsystem: 1014:0534
!!Modprobe options (Sound related)
!!--------------------------------
snd-atiixp-modem: index=-2
snd-intel8x0m: index=-2
snd-via82xx-modem: index=-2
snd-usb-audio: index=-2
snd-usb-usx2y: index=-2
snd-usb-caiaq: index=-2
snd-cmipci: mpu_port=0x330 fm_port=0x388
!!Loaded sound module options
!!--------------------------
!!ALSA Device nodes
!!-----------------
crw-rw----+ 1 root audio 116, 1 2008-07-28 12:36 /dev/snd/seq
crw-rw----+ 1 root audio 116, 33 2008-07-28 12:36 /dev/snd/timer
!!Aplay/Arecord output
!!------------
APLAY
aplay: device_list:205: no soundcards found...
ARECORD
arecord: device_list:205: no soundcards found...
!!Amixer output
!!-------------
!!Alsactl output
!!-------------
--startcollapse--
--endcollapse--
!!All Loaded Modules
!!------------------
Module
ipv6
af_packet
radeon
drm
rfcomm
l2cap
bluetooth
uinput
ppdev
speedstep_centrino
cpufreq_ondemand
cpufreq_userspace
cpufreq_powersave
cpufreq_conservative
cpufreq_stats
freq_table
sbs
bay
dock
sbshc
container
iptable_filter
ip_tables
x_tables
sbp2
lp
pcmcia
battery
ac
geode_aes
blkcipher
aes_generic
thinkpad_acpi
evdev
nvram
video
output
snd_intel8x0
irtty_sir
snd_ac97_codec
sir_dev
ac97_bus
snd_pcm_oss
nsc_ircc
snd_mixer_oss
snd_pcm
irda
crc_ccitt
psmouse
parport_pc
parport
serio_raw
airo
yenta_socket
rsrc_nonstatic
pcmcia_core
snd_seq_dummy
snd_seq_oss
snd_seq_midi
snd_rawmidi
snd_seq_midi_event
button
snd_seq
snd_timer
snd_seq_device
snd
intel_agp
shpchp
pci_hotplug
soundcore
iTCO_wdt
iTCO_vendor_support
agpgart
pcspkr
snd_page_alloc
ext3
jbd
mbcache
sg
sr_mod
cdrom
sd_mod
pata_acpi
ata_generic
ata_piix
ohci1394
e100
mii
ieee1394
libata
scsi_mod
ehci_hcd
uhci_hcd
usbcore
thermal
processor
fan
fbcon
tileblit
font
bitblit
softcursor
fuse
$ dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.24-20-generic (buildd@palmer) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Thu Jul 17 16:29:46 UTC 2008 (Ubuntu 2.6.24-20.37-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003ff60000 (usable)
[ 0.000000] BIOS-e820: 000000003ff60000 - 000000003ff77000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003ff77000 - 000000003ff79000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003ff80000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
[ 0.000000] 127MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] Entering add_active_range(0, 0, 261984) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 261984
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 261984
[ 0.000000] On node 0 totalpages: 261984
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 254 pages used for memmap
[ 0.000000] HighMem zone: 32354 pages, LIFO batch:7
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP signature @ 0xC00F6DF0 checksum 0
[ 0.000000] ACPI: RSDP 000F6DF0, 0024 (r2 IBM )
[ 0.000000] ACPI: XSDT 3FF69E78, 004C (r1 IBM TP-1Q 3004 LTP 0)
[ 0.000000] ACPI: FACP 3FF69F00, 00F4 (r3 IBM TP-1Q 3004 IBM 1)
[ 0.000000] ACPI Warning (tbfadt-0442): Optional field "Gpe1Block" has zero address or length: 000000000000102C/0 [20070126]
[ 0.000000] ACPI: DSDT 3FF6A0E7, CD2A (r1 IBM TP-1Q 3004 MSFT 100000E)
[ 0.000000] ACPI: FACS 3FF78000, 0040
[ 0.000000] ACPI: SSDT 3FF6A0B4, 0033 (r1 IBM TP-1Q 3004 MSFT 100000E)
[ 0.000000] ACPI: ECDT 3FF76E11, 0052 (r1 IBM TP-1Q 3004 IBM 1)
[ 0.000000] ACPI: TCPA 3FF76E63, 0032 (r1 IBM TP-1Q 3004 PTL 1)
[ 0.000000] ACPI: BOOT 3FF76FD8, 0028 (r1 IBM TP-1Q 3004 LTP 1)
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bf800000)
[ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000d2000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000d2000 - 00000000000d4000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000d4000 - 00000000000e0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259938
[ 0.000000] Kernel command line: root=UUID=18d1c176-613c-41bd-9689-54d197ff4c32 ro quiet splash
[ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
[ 0.000000] mapped APIC to ffffb000 (0180f000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 1398.830 MHz processor.
[ 3.569866] Console: colour VGA+ 80x25
[ 3.569871] console [tty0] enabled
[ 3.570533] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 3.571259] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 3.614168] Memory: 1026800k/1047936k available (2177k kernel code, 20444k reserved, 1006k data, 368k init, 130432k highmem)
[ 3.614178] virtual kernel memory layout:
[ 3.614180] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB)
[ 3.614181] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 3.614183] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 3.614185] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 3.614186] .init : 0xc0421000 - 0xc047d000 ( 368 kB)
[ 3.614188] .data : 0xc03204d4 - 0xc041bdc4 (1006 kB)
[ 3.614189] .text : 0xc0100000 - 0xc03204d4 (2177 kB)
[ 3.614194] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 3.614265] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[ 3.694290] Calibrating delay using timer specific routine.. 2799.83 BogoMIPS (lpj=5599668)
[ 3.694337] Security Framework initialized
[ 3.694352] SELinux: Disabled at boot.
[ 3.694378] AppArmor: AppArmor initialized
[ 3.694384] Failure registering capabilities with primary security module.
[ 3.694397] Mount-cache hash table entries: 512
[ 3.694601] Initializing cgroup subsys ns
[ 3.694611] Initializing cgroup subsys cpuacct
[ 3.694628] CPU: After generic identify, caps: a7e9f9bf 00000000 00000000 00000000 00000180 00000000 00000000 00000000
[ 3.694644] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 3.694647] CPU: L2 cache: 1024K
[ 3.694652] CPU: After all inits, caps: a7e9f9bf 00000000 00000000 00042040 00000180 00000000 00000000 00000000
[ 3.694667] Compat vDSO mapped to ffffe000.
[ 3.694687] Checking 'hlt' instruction... OK.
[ 3.710797] SMP alternatives: switching to UP code
[ 3.713182] Freeing SMP alternatives: 11k freed
[ 3.713337] Early unpacking initramfs... done
[ 4.155259] ACPI: Core revision 20070126
[ 4.155400] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 4.161094] ACPI: setting ELCR to 0200 (from 0800)
[ 4.169402] CPU0: Intel(R) Pentium(R) M processor 1400MHz stepping 05
[ 4.169409] SMP motherboard not detected.
[ 4.169412] Local APIC not detected. Using dummy APIC emulation.
[ 4.169465] Brought up 1 CPUs
[ 4.169489] CPU0 attaching sched-domain:
[ 4.169492] domain 0: span 01
[ 4.169494] groups: 01
[ 4.169707] net_namespace: 64 bytes
[ 4.169716] Booting paravirtualized kernel on bare hardware
[ 4.170441] Time: 18:35:51 Date: 07/28/08
[ 4.170473] NET: Registered protocol family 16
[ 4.170704] EISA bus registered
[ 4.170717] ACPI: bus type pci registered
[ 4.171055] PCI: PCI BIOS revision 2.10 entry at 0xfd8d6, last bus=8
[ 4.171058] PCI: Using configuration type 1
[ 4.171065] Setting up standard PCI resources
[ 4.175956] ACPI: EC: EC description table is found, configuring boot EC
[ 4.182370] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 4.196474] ACPI: Interpreter enabled
[ 4.196478] ACPI: (supports S0 S3 S4 S5)
[ 4.196495] ACPI: Using PIC for interrupt routing
[ 4.208949] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[ 4.208953] ACPI: EC: driver started in poll mode
[ 4.209136] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 4.209538] PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
[ 4.209542] PCI quirk: region 1180-11bf claimed by ICH4 GPIO
[ 4.210119] PCI: Transparent bridge - 0000:00:1e.0
[ 4.210242] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 4.210319] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[ 4.210348] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[ 4.213074] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
[ 4.213305] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
[ 4.213533] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
[ 4.213761] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
[ 4.213988] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
[ 4.214197] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[ 4.214442] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[ 4.214671] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
[ 4.214975] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 4.215232] ACPI: Power Resource [PUBS] (on)
[ 4.215287] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 4.215323] pnp: PnP ACPI init
[ 4.215332] ACPI: bus type pnp registered
[ 4.216616] pnpacpi: exceeded the max number of mem resources: 12
[ 4.221636] pnp: PnP ACPI: found 12 devices
[ 4.221639] ACPI: ACPI bus type pnp unregistered
[ 4.221643] PnPBIOS: Disabled by ACPI PNP
[ 4.221911] PCI: Using ACPI for IRQ routing
[ 4.221915] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 4.246291] NET: Registered protocol family 8
[ 4.246294] NET: Registered protocol family 20
[ 4.246372] AppArmor: AppArmor Filesystem Enabled
[ 4.250283] Time: tsc clocksource has been installed.
[ 4.258324] system 00:00: iomem range 0x0-0x9ffff could not be reserved
[ 4.258328] system 00:00: iomem range 0xc0000-0xc3fff could not be reserved
[ 4.258332] system 00:00: iomem range 0xc4000-0xc7fff could not be reserved
[ 4.258336] system 00:00: iomem range 0xc8000-0xcbfff could not be reserved
[ 4.258339] system 00:00: iomem range 0xcc000-0xcffff could not be reserved
[ 4.258343] system 00:00: iomem range 0xd0000-0xd3fff could not be reserved
[ 4.258346] system 00:00: iomem range 0x0-0x0 could not be reserved
[ 4.258350] system 00:00: iomem range 0x0-0x0 could not be reserved
[ 4.258353] system 00:00: iomem range 0x0-0x0 could not be reserved
[ 4.258357] system 00:00: iomem range 0xe0000-0xe3fff could not be reserved
[ 4.258361] system 00:00: iomem range 0xe4000-0xe7fff could not be reserved
[ 4.258364] system 00:00: iomem range 0xe8000-0xebfff could not be reserved
[ 4.258372] system 00:02: ioport range 0x1000-0x107f has been reserved
[ 4.258375] system 00:02: ioport range 0x1180-0x11bf has been reserved
[ 4.258379] system 00:02: ioport range 0x15e0-0x15ef has been reserved
[ 4.258382] system 00:02: ioport range 0x1600-0x167f has been reserved
[ 4.288873] PCI: Bridge: 0000:00:01.0
[ 4.288876] IO window: 3000-3fff
[ 4.288880] MEM window: c0100000-c01fffff
[ 4.288884] PREFETCH window: e0000000-e7ffffff
[ 4.288893] PCI: Bus 3, cardbus bridge: 0000:02:00.0
[ 4.288895] IO window: 00004000-000040ff
[ 4.288899] IO window: 00004400-000044ff
[ 4.288904] PREFETCH window: e8000000-ebffffff
[ 4.288908] MEM window: c4000000-c7ffffff
[ 4.288912] PCI: Bus 7, cardbus bridge: 0000:02:00.1
[ 4.288914] IO window: 00004800-000048ff
[ 4.288918] IO window: 00004c00-00004cff
[ 4.288922] PREFETCH window: ec000000-efffffff
[ 4.288926] MEM window: c8000000-cbffffff
[ 4.288930] PCI: Bridge: 0000:00:1e.0
[ 4.288933] IO window: 4000-8fff
[ 4.288939] MEM window: c0200000-cfffffff
[ 4.288943] PREFETCH window: e8000000-efffffff
[ 4.288959] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 4.289385] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
[ 4.289388] PCI: setting IRQ 11 as level-triggered
[ 4.289393] ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 4.289792] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
[ 4.289795] ACPI: PCI Interrupt 0000:02:00.1[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
[ 4.289811] NET: Registered protocol family 2
[ 4.326381] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 4.326744] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 4.328321] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 4.329438] TCP: Hash tables configured (established 131072 bind 65536)
[ 4.329443] TCP reno registered
[ 4.338529] checking if image is initramfs... it is
[ 4.790295] Switched to high resolution mode on CPU 0
[ 5.205854] Freeing initrd memory: 7306k freed
[ 5.206114] Simple Boot Flag at 0x35 set to 0x1
[ 5.206560] audit: initializing netlink socket (disabled)
[ 5.206580] audit(1217270151.592:1): initialized
[ 5.206793] highmem bounce pool size: 64 pages
[ 5.209311] VFS: Disk quotas dquot_6.5.1
[ 5.209416] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 5.209601] io scheduler noop registered
[ 5.209605] io scheduler anticipatory registered
[ 5.209608] io scheduler deadline registered
[ 5.209626] io scheduler cfq registered (default)
[ 5.209703] Boot video device is 0000:01:00.0
[ 5.209714] PCI: Firmware left 0000:02:08.0 e100 interrupts enabled, disabling
[ 5.210082] isapnp: Scanning for PnP cards...
[ 5.563023] isapnp: No Plug & Play device found
[ 5.601059] Real Time Clock Driver v1.12ac
[ 5.601190] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 5.602423] serial 00:09: activated
[ 5.602954] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A
[ 5.603173] ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
[ 5.603184] ACPI: PCI interrupt for device 0000:00:1f.6 disabled
[ 5.603921] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 5.604006] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 5.604132] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 5.612922] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 5.612928] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 5.614237] mice: PS/2 mouse device common for all mice
[ 5.614371] EISA: Probing bus 0 at eisa.0
[ 5.614378] Cannot allocate resource for EISA slot 1
[ 5.614382] Cannot allocate resource for EISA slot 2
[ 5.614385] Cannot allocate resource for EISA slot 3
[ 5.614387] Cannot allocate resource for EISA slot 4
[ 5.614390] Cannot allocate resource for EISA slot 5
[ 5.614393] Cannot allocate resource for EISA slot 6
[ 5.614395] Cannot allocate resource for EISA slot 7
[ 5.614398] Cannot allocate resource for EISA slot 8
[ 5.614400] EISA: Detected 0 cards.
[ 5.614405] cpuidle: using governor ladder
[ 5.614407] cpuidle: using governor menu
[ 5.614526] NET: Registered protocol family 1
[ 5.614564] Using IPI No-Shortcut mode
[ 5.614601] registered taskstats version 1
[ 5.614733] Magic number: 0:51:596
[ 5.614792] hash matches device ptyd0
[ 5.614901] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 5.614904] EDD information not available.
[ 5.615166] Freeing unused kernel memory: 368k freed
[ 5.619703] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 6.897818] fuse init (API version 7.9)
[ 6.926444] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 6.926453] ACPI: Processor [CPU] (supports 8 throttling states)
[ 6.930472] ACPI: Thermal Zone [THM0] (67 C)
[ 7.738011] usbcore: registered new interface driver usbfs
[ 7.738043] usbcore: registered new interface driver hub
[ 7.754520] usbcore: registered new device driver usb
[ 7.773947] USB Universal Host Controller Interface driver v3.0
[ 7.774037] ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 7.774052] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 7.774057] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 7.774542] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 7.774569] uhci_hcd 0000:00:1d.0: irq 11, io base 0x00001800
[ 7.774755] usb usb1: configuration #1 chosen from 1 choice
[ 7.774785] hub 1-0:1.0: USB hub found
[ 7.774792] hub 1-0:1.0: 2 ports detected
[ 7.878510] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[ 7.878516] ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
[ 7.878530] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 7.878535] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 7.878566] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 7.878592] uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001820
[ 7.878752] usb usb2: configuration #1 chosen from 1 choice
[ 7.878783] hub 2-0:1.0: USB hub found
[ 7.878790] hub 2-0:1.0: 2 ports detected
[ 7.934190] SCSI subsystem initialized
[ 7.982510] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[ 7.982517] ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
[ 7.982532] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 7.982536] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 7.982568] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 7.982595] uhci_hcd 0000:00:1d.2: irq 11, io base 0x00001840
[ 7.982750] usb usb3: configuration #1 chosen from 1 choice
[ 7.982779] hub 3-0:1.0: USB hub found
[ 7.982787] hub 3-0:1.0: 2 ports detected
[ 8.076202] libata version 3.00 loaded.
[ 8.078438] e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
[ 8.078441] e100: Copyright(c) 1999-2006 Intel Corporation
[ 8.086864] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
[ 8.086869] ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11
[ 8.086885] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 8.086890] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 8.086925] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
[ 8.090831] ehci_hcd 0000:00:1d.7: debug port 1
[ 8.090838] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 8.090847] ehci_hcd 0000:00:1d.7: irq 11, io mem 0xc0000000
[ 8.105898] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 8.106058] usb usb4: configuration #1 chosen from 1 choice
[ 8.106092] hub 4-0:1.0: USB hub found
[ 8.106100] hub 4-0:1.0: 6 ports detected
[ 8.210619] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11
[ 8.210625] ACPI: PCI Interrupt 0000:02:08.0[A] -> Link [LNKE] -> GSI 11 (level, low) -> IRQ 11
[ 8.235458] e100: eth0: e100_probe: addr 0xc0204000, irq 11, MAC addr 00:11:25:82:48:5b
[ 8.235488] ACPI: PCI Interrupt 0000:02:00.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
[ 8.288249] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[11] MMIO=[c0205000-c02057ff] Max Packet=[2048] IR/IT contexts=[4/4]
[ 8.363073] ata_piix 0000:00:1f.1: version 2.12
[ 8.363095] PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
[ 8.363106] ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
[ 8.363157] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 8.363500] scsi0 : ata_piix
[ 8.364286] scsi1 : ata_piix
[ 8.365424] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1860 irq 14
[ 8.365428] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1868 irq 15
[ 8.526403] ata1.00: ATA-5: IC25N040ATCS04-0, CA4OA71A, max UDMA/100
[ 8.526410] ata1.00: 78140160 sectors, multi 16: LBA
[ 8.542347] ata1.00: configured for UDMA/100
[ 8.862163] ata2.00: ATAPI: MATSHITADVD-ROM SR-8177, NB21, max UDMA/33
[ 9.034078] ata2.00: configured for UDMA/33
[ 9.034239] scsi 0:0:0:0: Direct-Access ATA IC25N040ATCS04-0 CA4O PQ: 0 ANSI: 5
[ 9.036265] scsi 1:0:0:0: CD-ROM MATSHITA DVD-ROM SR-8177 NB21 PQ: 0 ANSI: 5
[ 9.061834] Driver 'sd' needs updating - please use bus_type methods
[ 9.061946] sd 0:0:0:0: [sda] 78140160 512-byte hardware sectors (40008 MB)
[ 9.061962] sd 0:0:0:0: [sda] Write Protect is off
[ 9.061965] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 9.061985] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 9.062042] sd 0:0:0:0: [sda] 78140160 512-byte hardware sectors (40008 MB)
[ 9.062054] sd 0:0:0:0: [sda] Write Protect is off
[ 9.062056] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 9.062075] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 9.062079] sda:<4>Driver 'sr' needs updating - please use bus_type methods
[ 9.092168] sda1 sda2 < sda5 >
[ 9.117142] sd 0:0:0:0: [sda] Attached SCSI disk
[ 9.126263] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 9.126289] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 9.128870] sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
[ 9.128876] Uniform CD-ROM driver Revision: 3.20
[ 9.128944] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 9.495412] Attempting manual resume
[ 9.495417] swsusp: Resume From Partition 8:5
[ 9.495419] PM: Checking swsusp image.
[ 9.495594] PM: Resume from disk failed.
[ 9.541522] kjournald starting. Commit interval 5 seconds
[ 9.541538] EXT3-fs: mounted filesystem with ordered data mode.
[ 9.633827] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00061b0329035ade]
[ 9.785674] Clocksource tsc unstable (delta = -1531054351 ns)
[ 9.792303] Time: acpi_pm clocksource has been installed.
[ 29.084807] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 29.168702] Linux agpgart interface v0.102
[ 29.252693] iTCO_vendor_support: vendor-support=0
[ 29.328689] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
[ 29.328797] iTCO_wdt: Found a ICH4-M TCO device (Version=1, TCOBASE=0x1060)
[ 29.328831] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 29.488688] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 29.564739] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 29.636692] agpgart: Detected an Intel 855PM Chipset.
[ 29.650640] agpgart: AGP aperture is 256M @ 0xd0000000
[ 29.768602] intel_rng: FWH not detected
[ 30.064768] input: Power Button (FF) as /devices/virtual/input/input3
[ 30.080556] ACPI: Power Button (FF) [PWRF]
[ 30.080662] input: Lid Switch as /devices/virtual/input/input4
[ 30.081216] ACPI: Lid Switch [LID]
[ 30.081278] input: Sleep Button (CM) as /devices/virtual/input/input5
[ 30.096553] ACPI: Sleep Button (CM) [SLPB]
[ 31.404487] Yenta: CardBus bridge found at 0000:02:00.0 [1014:0532]
[ 31.496412] airo(): Probing for PCI adapters
[ 31.533041] Yenta: ISA IRQ mask 0x04b8, PCI irq 11
[ 31.533045] Socket status: 30000006
[ 31.533050] pcmcia: parent PCI bridge I/O window: 0x4000 - 0x8fff
[ 31.533054] cs: IO port probe 0x4000-0x8fff: clean.
[ 31.534468] pcmcia: parent PCI bridge Memory window: 0xc0200000 - 0xcfffffff
[ 31.534471] pcmcia: parent PCI bridge Memory window: 0xe8000000 - 0xefffffff
[ 31.643900] Yenta: CardBus bridge found at 0000:02:00.1 [1014:0532]
[ 31.769017] Yenta: ISA IRQ mask 0x04b8, PCI irq 11
[ 31.769023] Socket status: 30000006
[ 31.769028] pcmcia: parent PCI bridge I/O window: 0x4000 - 0x8fff
[ 31.769032] cs: IO port probe 0x4000-0x8fff: clean.
[ 31.770446] pcmcia: parent PCI bridge Memory window: 0xc0200000 - 0xcfffffff
[ 31.770450] pcmcia: parent PCI bridge Memory window: 0xe8000000 - 0xefffffff
[ 31.776386] parport_pc 00:0a: reported by Plug and Play ACPI
[ 31.776434] parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE]
[ 31.840584] ACPI: PCI Interrupt 0000:02:02.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
[ 31.840609] airo(): Found an MPI350 card
[ 32.139750] irda_init()
[ 32.139778] NET: Registered protocol family 23
[ 32.457766] IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 32.476435] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input6
[ 32.497187] nsc-ircc 00:0b: activated
[ 32.497194] nsc_ircc_pnp_probe() : From PnP, found firbase 0x2F8 ; irq 3 ; dma 1.
[ 32.497354] nsc-ircc, chip->init
[ 32.497364] nsc-ircc, Found chip at base=0x02e
[ 32.497388] nsc-ircc, driver loaded (Dag Brattli)
[ 32.497740] IrDA: Registered device irda0
[ 32.497743] nsc-ircc, Using dongle: IBM31T1100 or Temic TFDS6000/TFDS6500
[ 32.976619] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:02/LNXVIDEO:00/input/input7
[ 32.992187] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 33.316265] Non-volatile memory driver v1.2
[ 33.397807] thinkpad_acpi: ThinkPad ACPI Extras v0.17
[ 33.397812] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 33.397815] thinkpad_acpi: ThinkPad BIOS 1QET94WW (3.00d), EC 1QHT22WW-1.07b
[ 33.397818] thinkpad_acpi: IBM ThinkPad X31
[ 33.404889] thinkpad_acpi: another device driver is already handling bay events
[ 33.404894] thinkpad_acpi: disabling subdriver bay
[ 33.421609] input: ThinkPad Extra Buttons as /devices/virtual/input/input8
[ 33.472181] padlock: VIA PadLock not detected.
[ 33.835419] ACPI: AC Adapter [AC] (on-line)
[ 33.886269] ACPI: Battery Slot [BAT0] (battery present)
[ 33.887362] ACPI: Battery Slot [BAT2] (battery absent)
[ 35.704575] cs: IO port probe 0x100-0x3af: clean.
[ 35.705579] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[ 35.706014] cs: IO port probe 0x820-0x8ff: clean.
[ 35.706384] cs: IO port probe 0xc00-0xcf7: clean.
[ 35.706937] cs: IO port probe 0xa00-0xaff: clean.
[ 35.707543] cs: IO port probe 0x100-0x3af: clean.
[ 35.708558] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[ 35.708992] cs: IO port probe 0x820-0x8ff: clean.
[ 35.709361] cs: IO port probe 0xc00-0xcf7: clean.
[ 35.709882] cs: IO port probe 0xa00-0xaff: clean.
[ 37.248561] lp0: using parport0 (interrupt-driven).
[ 37.347234] Adding 1646620k swap on /dev/sda5. Priority:-1 extents:1 across:1646620k
[ 37.791062] EXT3 FS on sda1, internal journal
[ 38.788556] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 39.361977] ACPI: ACPI Dock Station Driver
[ 39.372207] ACPI: \_SB_.PCI0.IDE0.SCND.MSTR: found ejectable bay
[ 39.372215] ACPI: \_SB_.PCI0.IDE0.SCND.MSTR: Adding notify handler
[ 39.372306] ACPI: Error installing bay notify handler
[ 39.372312] ACPI: Bay [\_SB_.PCI0.IDE0.SCND.MSTR] Added
[ 40.842806] IBM machine detected. Enabling interrupts during APM calls.
[ 40.842814] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 40.842816] apm: overridden by ACPI.
[ 41.052211] ppdev: user-space parallel port driver
[ 41.371409] audit(1217270362.120:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=4832 profile="/usr/sbin/cupsd" namespace="default"
[ 41.581177] input: /usr/sbin/thinkpad-keys as /devices/virtual/input/input9
[ 97.569605] Marking TSC unstable due to: cpufreq changes.
[ 49.929070] e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
[ 50.046977] Bluetooth: Core ver 2.11
[ 50.047749] NET: Registered protocol family 31
[ 50.047754] Bluetooth: HCI device and connection manager initialized
[ 50.047759] Bluetooth: HCI socket layer initialized
[ 60.045455] Bluetooth: L2CAP ver 2.9
[ 60.045463] Bluetooth: L2CAP socket layer initialized
[ 43.020039] Bluetooth: RFCOMM socket layer initialized
[ 43.020057] Bluetooth: RFCOMM TTY layer initialized
[ 43.020059] Bluetooth: RFCOMM ver 1.8
[ 104.421974] [drm] Initialized drm 1.1.0 20060810
[ 104.471831] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 104.472414] [drm] Initialized radeon 1.28.0 20060524 on minor 0
[ 105.247298] NET: Registered protocol family 17
[ 45.545845] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
[ 45.546125] agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
[ 45.546317] agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
[ 106.927812] [drm] Setting GART location based on new memory map
[ 106.927886] [drm] writeback test succeeded in 2 usecs
[ 107.290596] NET: Registered protocol family 10
[ 107.291716] lo: Disabled Privacy Extensions
[ 116.215125] eth0: no IPv6 routers present
$ cat /proc/interrupts
CPU0
0: 32847 XT-PIC-XT timer
1: 437 XT-PIC-XT i8042
2: 0 XT-PIC-XT cascade
3: 2 XT-PIC-XT
4: 4 XT-PIC-XT
5: 2 XT-PIC-XT
7: 2 XT-PIC-XT parport0
8: 3 XT-PIC-XT rtc
9: 762 XT-PIC-XT acpi
10: 2 XT-PIC-XT
11: 250 XT-PIC-XT uhci_hcd:usb1, uhci_hcd:usb2, uhci_hcd:usb3, ehci_hcd:usb4, ohci1394, yenta, yenta, eth0, radeon@pci:0000:01:00.0
12: 7715 XT-PIC-XT i8042
14: 8482 XT-PIC-XT libata
15: 1472 XT-PIC-XT libata
NMI: 0 Non-maskable interrupts
LOC: 0 Local timer interrupts
RES: 0 Rescheduling interrupts
CAL: 0 function call interrupts
TLB: 0 TLB shootdowns
TRM: 0 Thermal event interrupts
SPU: 0 Spurious interrupts
ERR: 0
MIS: 0