rendered paste bodypci:Jul 22 16:07:29 paolo-desktop kernel: [ 660.189592] ip6_tables: (C) 2000-2006 Netfilter Core TeamJul 22 16:08:25 paolo-desktop kernel: Inspecting /boot/System.map-2.6.24-16-genericJul 22 16:08:25 paolo-desktop kernel: Loaded 27704 symbols from /boot/System.map-2.6.24-16-generic.Jul 22 16:08:25 paolo-desktop kernel: Symbols match kernel version 2.6.24.Jul 22 16:08:26 paolo-desktop kernel: Loaded 16114 symbols from 78 modules.Jul 22 16:08:26 paolo-desktop kernel: [ 0.000000] Linux version 2.6.24-16-generic (buildd@palmer) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Thu Apr 10 13:23:42 UTC 2008 (Ubuntu 2.6.24-16.30-generic)Jul 22 16:08:26 paolo-desktop kernel: [ 0.000000] BIOS-provided physical RAM map:Jul 22 16:08:26 paolo-desktop kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)Jul 22 16:08:26 paolo-desktop kernel: [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)Jul 22 16:08:26 paolo-desktop kernel: [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)Jul 22 16:08:26 paolo-desktop kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 000000003fef0000 (usable)Jul 22 16:08:26 paolo-desktop kernel: [ 0.000000] BIOS-e820: 000000003fef0000 - 000000003fef3000 (ACPI NVS)Jul 22 16:08:26 paolo-desktop kernel: [ 0.000000] BIOS-e820: 000000003fef3000 - 000000003ff00000 (ACPI data)Jul 22 16:08:26 paolo-desktop kernel: [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)Jul 22 16:08:26 paolo-desktop kernel: [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)Jul 22 16:08:26 paolo-desktop kernel: [ 0.000000] 126MB HIGHMEM available.Jul 22 16:08:26 paolo-desktop kernel: [ 0.000000] 896MB LOWMEM available.Jul 22 16:08:26 paolo-desktop kernel: [ 0.000000] found SMP MP-table at 000f5790Jul 22 16:08:26 paolo-desktop kernel: [ 0.000000] Entering add_active_range(0, 0, 261872) 0 entries of 256 usedJul 22 16:08:26 paolo-desktop kernel: [ 0.000000] Zone PFN ranges:Jul 22 16:08:26 paolo-desktop kernel: [ 0.000000] DMA 0 -> 4096Jul 22 16:08:26 paolo-desktop kernel: [ 0.000000] Normal 4096 -> 229376Jul 22 16:08:26 paolo-desktop kernel: [ 0.000000] HighMem 229376 -> 261872Jul 22 16:08:26 paolo-desktop kernel: [ 0.000000] Movable zone start PFN for each nodeJul 22 16:08:26 paolo-desktop kernel: [ 0.000000] early_node_map[1] active PFN rangesJul 22 16:08:26 paolo-desktop kernel: [ 0.000000] 0: 0 -> 261872Jul 22 16:08:26 paolo-desktop kernel: [ 0.000000] On node 0 totalpages: 261872Jul 22 16:08:26 paolo-desktop kernel: [ 0.000000] DMA zone: 32 pages used for memmapJul 22 16:08:26 paolo-desktop kernel: [ 0.000000] DMA zone: 0 pages reservedJul 22 16:08:26 paolo-desktop kernel: [ 0.000000] DMA zone: 4064 pages, LIFO batch:0Jul 22 16:08:26 paolo-desktop kernel: [ 0.000000] Normal zone: 1760 pages used for memmapJul 22 16:08:26 paolo-desktop kernel: [ 0.000000] Normal zone: 223520 pages, LIFO batch:31Jul 22 16:08:26 paolo-desktop kernel: [ 0.000000] HighMem zone: 253 pages used for memmapJul 22 16:08:26 paolo-desktop kernel: [ 0.000000] HighMem zone: 32243 pages, LIFO batch:7Jul 22 16:08:26 paolo-desktop kernel: [ 0.000000] Movable zone: 0 pages used for memmapJul 22 16:08:26 paolo-desktop kernel: [ 0.000000] DMI 2.3 present.Jul 22 16:08:26 paolo-desktop kernel: [ 0.000000] ACPI: RSDP signature @ 0xC00F7240 checksum 0Jul 22 16:08:26 paolo-desktop kernel: [ 0.000000] ACPI: RSDP 000F7240, 0014 (r0 Nvidia)Jul 22 16:08:26 paolo-desktop kernel: [ 0.000000] ACPI: RSDT 3FEF3040, 0030 (r1 Nvidia AWRDACPI 42302E31 AWRD 0)Jul 22 16:08:26 paolo-desktop kernel: [ 0.000000] ACPI: FACP 3FEF30C0, 0074 (r1 Nvidia AWRDACPI 42302E31 AWRD 0)Jul 22 16:08:26 paolo-desktop kernel: [ 0.000000] ACPI: DSDT 3FEF3180, 7CAE (r1 NVIDIA AWRDACPI 1000 MSFT 100000E)Jul 22 16:08:26 paolo-desktop kernel: [ 0.000000] ACPI: FACS 3FEF0000, 0040Jul 22 16:08:26 paolo-desktop kernel: [ 0.000000] ACPI: MCFG 3FEFAF40, 003C (r1 Nvidia AWRDACPI 42302E31 AWRD 0)Jul 22 16:08:26 paolo-desktop kernel: [ 0.000000] ACPI: APIC 3FEFAE80, 007C (r1 Nvidia AWRDACPI 42302E31 AWRD 0)Jul 22 16:08:26 paolo-desktop kernel: [ 0.000000] Nvidia board detected. Ignoring ACPI timer override.Jul 22 16:08:26 paolo-desktop kernel: [ 0.000000] If you got timer trouble try acpi_use_timer_overrideJul 22 16:08:26 paolo-desktop kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x4008Jul 22 16:08:26 paolo-desktop kernel: [ 0.000000] ACPI: Local APIC address 0xfee00000Jul 22 16:08:26 paolo-desktop kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)Jul 22 16:08:26 paolo-desktop kernel: [ 0.000000] Processor #0 15:11 APIC version 16Jul 22 16:08:26 paolo-desktop kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)Jul 22 16:08:26 paolo-desktop kernel: [ 0.000000] Processor #1 15:11 APIC version 16Jul 22 16:08:26 paolo-desktop kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])Jul 22 16:08:26 paolo-desktop kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])Jul 22 16:08:26 paolo-desktop kernel: [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])Jul 22 16:08:26 paolo-desktop kernel: [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23Jul 22 16:08:26 paolo-desktop kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)Jul 22 16:08:26 paolo-desktop kernel: [ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored.Jul 22 16:08:26 paolo-desktop kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)Jul 22 16:08:26 paolo-desktop kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)Jul 22 16:08:26 paolo-desktop kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)Jul 22 16:08:26 paolo-desktop kernel: [ 0.000000] ACPI: IRQ9 used by override.Jul 22 16:08:26 paolo-desktop kernel: [ 0.000000] ACPI: IRQ14 used by override.Jul 22 16:08:26 paolo-desktop kernel: [ 0.000000] ACPI: IRQ15 used by override.Jul 22 16:08:26 paolo-desktop kernel: [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICsJul 22 16:08:26 paolo-desktop kernel: [ 0.000000] Using ACPI (MADT) for SMP configuration informationJul 22 16:08:26 paolo-desktop kernel: [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 3ff00000:b0100000)Jul 22 16:08:26 paolo-desktop kernel: [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000Jul 22 16:08:26 paolo-desktop kernel: [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000Jul 22 16:08:26 paolo-desktop kernel: [ 0.000000] swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000Jul 22 16:08:26 paolo-desktop kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259827Jul 22 16:08:26 paolo-desktop kernel: [ 0.000000] Kernel command line: root=UUID=50de9f9b-1da6-43e0-9750-d75c6ac2d2de ro quiet splashJul 22 16:08:26 paolo-desktop kernel: [ 0.000000] mapped APIC to ffffb000 (fee00000)Jul 22 16:08:26 paolo-desktop kernel: [ 0.000000] mapped IOAPIC to ffffa000 (fec00000)Jul 22 16:08:26 paolo-desktop kernel: [ 0.000000] Enabling fast FPU save and restore... done.Jul 22 16:08:26 paolo-desktop kernel: [ 0.000000] Enabling unmasked SIMD FPU exception support... done.Jul 22 16:08:26 paolo-desktop kernel: [ 0.000000] Initializing CPU#0Jul 22 16:08:26 paolo-desktop kernel: [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)Jul 22 16:08:26 paolo-desktop kernel: [ 0.000000] Detected 2204.635 MHz processor.Jul 22 16:08:26 paolo-desktop kernel: [ 27.049584] spurious 8259A interrupt: IRQ7.Jul 22 16:08:26 paolo-desktop kernel: [ 27.051738] Console: colour VGA+ 80x25Jul 22 16:08:26 paolo-desktop kernel: [ 27.051742] console [tty0] enabledJul 22 16:08:26 paolo-desktop kernel: [ 27.052104] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)Jul 22 16:08:26 paolo-desktop kernel: [ 27.052485] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)Jul 22 16:08:26 paolo-desktop kernel: [ 27.074074] Memory: 1026000k/1047488k available (2157k kernel code, 20840k reserved, 998k data, 364k init, 129984k highmem)Jul 22 16:08:26 paolo-desktop kernel: [ 27.074081] virtual kernel memory layout:Jul 22 16:08:26 paolo-desktop kernel: [ 27.074082] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB)Jul 22 16:08:26 paolo-desktop kernel: [ 27.074083] pkmap : 0xff800000 - 0xffc00000 (4096 kB)Jul 22 16:08:26 paolo-desktop kernel: [ 27.074084] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)Jul 22 16:08:26 paolo-desktop kernel: [ 27.074085] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)Jul 22 16:08:26 paolo-desktop kernel: [ 27.074086] .init : 0xc041b000 - 0xc0476000 ( 364 kB)Jul 22 16:08:26 paolo-desktop kernel: [ 27.074087] .data : 0xc031b5a4 - 0xc0414dc4 ( 998 kB)Jul 22 16:08:26 paolo-desktop kernel: [ 27.074088] .text : 0xc0100000 - 0xc031b5a4 (2157 kB)Jul 22 16:08:26 paolo-desktop kernel: [ 27.074090] Checking if this processor honours the WP bit even in supervisor mode... Ok.Jul 22 16:08:26 paolo-desktop kernel: [ 27.074124] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1Jul 22 16:08:26 paolo-desktop kernel: [ 27.154068] Calibrating delay using timer specific routine.. 4413.20 BogoMIPS (lpj=8826411)Jul 22 16:08:26 paolo-desktop kernel: [ 27.154094] Security Framework initializedJul 22 16:08:26 paolo-desktop kernel: [ 27.154100] SELinux: Disabled at boot.Jul 22 16:08:26 paolo-desktop kernel: [ 27.154114] AppArmor: AppArmor initializedJul 22 16:08:26 paolo-desktop kernel: [ 27.154118] Failure registering capabilities with primary security module.Jul 22 16:08:26 paolo-desktop kernel: [ 27.154125] Mount-cache hash table entries: 512Jul 22 16:08:26 paolo-desktop kernel: [ 27.154239] CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000001f 00000000Jul 22 16:08:26 paolo-desktop kernel: [ 27.154247] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)Jul 22 16:08:26 paolo-desktop kernel: [ 27.154249] CPU: L2 Cache: 512K (64 bytes/line)Jul 22 16:08:26 paolo-desktop kernel: [ 27.154251] CPU 0(2) -> Core 0Jul 22 16:08:26 paolo-desktop kernel: [ 27.154253] CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000001f 00000000Jul 22 16:08:26 paolo-desktop kernel: [ 27.154262] Compat vDSO mapped to ffffe000.Jul 22 16:08:26 paolo-desktop kernel: [ 27.154272] Checking 'hlt' instruction... OK.Jul 22 16:08:26 paolo-desktop kernel: [ 27.170319] SMP alternatives: switching to UP codeJul 22 16:08:26 paolo-desktop kernel: [ 27.171449] Early unpacking initramfs... doneJul 22 16:08:26 paolo-desktop kernel: [ 27.462586] ACPI: Core revision 20070126Jul 22 16:08:26 paolo-desktop kernel: [ 27.462652] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.Jul 22 16:08:26 paolo-desktop kernel: [ 27.467430] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ stepping 02Jul 22 16:08:26 paolo-desktop kernel: [ 27.467445] SMP alternatives: switching to SMP codeJul 22 16:08:26 paolo-desktop kernel: [ 27.467843] Booting processor 1/1 eip 3000Jul 22 16:08:26 paolo-desktop kernel: [ 27.478259] Initializing CPU#1Jul 22 16:08:26 paolo-desktop kernel: [ 27.558112] Calibrating delay using timer specific routine.. 4409.51 BogoMIPS (lpj=8819024)Jul 22 16:08:26 paolo-desktop kernel: [ 27.558118] CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000001f 00000000Jul 22 16:08:26 paolo-desktop kernel: [ 27.558123] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)Jul 22 16:08:26 paolo-desktop kernel: [ 27.558125] CPU: L2 Cache: 512K (64 bytes/line)Jul 22 16:08:26 paolo-desktop kernel: [ 27.558127] CPU 1(2) -> Core 1Jul 22 16:08:26 paolo-desktop kernel: [ 27.558129] CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000001f 00000000Jul 22 16:08:26 paolo-desktop kernel: [ 27.557847] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ stepping 02Jul 22 16:08:26 paolo-desktop kernel: [ 27.557862] Total of 2 processors activated (8822.71 BogoMIPS).Jul 22 16:08:26 paolo-desktop kernel: [ 27.558158] ENABLING IO-APIC IRQsJul 22 16:08:26 paolo-desktop kernel: [ 27.558391] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1Jul 22 16:08:26 paolo-desktop kernel: [ 27.598091] ..MP-BIOS bug: 8254 timer not connected to IO-APICJul 22 16:08:26 paolo-desktop kernel: [ 27.598141] ...trying to set up timer (IRQ0) through the 8259A ... failed.Jul 22 16:08:26 paolo-desktop kernel: [ 27.598143] ...trying to set up timer as Virtual Wire IRQ... failed.Jul 22 16:08:26 paolo-desktop kernel: [ 27.637824] ...trying to set up timer as ExtINT IRQ... works.Jul 22 16:08:26 paolo-desktop kernel: [ 27.881463] Brought up 2 CPUsJul 22 16:08:26 paolo-desktop kernel: [ 27.881517] CPU0 attaching sched-domain:Jul 22 16:08:26 paolo-desktop kernel: [ 27.881520] domain 0: span 03Jul 22 16:08:26 paolo-desktop kernel: [ 27.881521] groups: 01 02Jul 22 16:08:26 paolo-desktop kernel: [ 27.881524] CPU1 attaching sched-domain:Jul 22 16:08:26 paolo-desktop kernel: [ 27.881526] domain 0: span 03Jul 22 16:08:26 paolo-desktop kernel: [ 27.881527] groups: 02 01Jul 22 16:08:26 paolo-desktop kernel: [ 27.881702] net_namespace: 64 bytesJul 22 16:08:26 paolo-desktop kernel: [ 27.881709] Booting paravirtualized kernel on bare hardwareJul 22 16:08:26 paolo-desktop kernel: [ 27.882120] Time: 14:08:07 Date: 07/22/08Jul 22 16:08:26 paolo-desktop kernel: [ 27.882144] NET: Registered protocol family 16Jul 22 16:08:26 paolo-desktop kernel: [ 27.882294] EISA bus registeredJul 22 16:08:26 paolo-desktop kernel: [ 27.882298] ACPI: bus type pci registeredJul 22 16:08:26 paolo-desktop kernel: [ 27.888799] PCI: PCI BIOS revision 3.00 entry at 0xf1ff0, last bus=4Jul 22 16:08:26 paolo-desktop kernel: [ 27.888801] PCI: Using configuration type 1Jul 22 16:08:26 paolo-desktop kernel: [ 27.888803] Setting up standard PCI resourcesJul 22 16:08:26 paolo-desktop kernel: [ 27.894028] ACPI: EC: Look up EC in DSDTJul 22 16:08:26 paolo-desktop kernel: [ 27.900967] ACPI: Interpreter enabledJul 22 16:08:26 paolo-desktop kernel: [ 27.900969] ACPI: (supports S0 S1 S3 S4 S5)Jul 22 16:08:26 paolo-desktop kernel: [ 27.900981] ACPI: Using IOAPIC for interrupt routingJul 22 16:08:26 paolo-desktop kernel: [ 27.911268] ACPI: PCI Root Bridge [PCI0] (0000:00)Jul 22 16:08:26 paolo-desktop kernel: [ 27.912218] PCI: Transparent bridge - 0000:00:10.0Jul 22 16:08:26 paolo-desktop kernel: [ 27.912234] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]Jul 22 16:08:26 paolo-desktop kernel: [ 27.912502] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]Jul 22 16:08:26 paolo-desktop kernel: [ 28.017764] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled.Jul 22 16:08:26 paolo-desktop kernel: [ 28.017957] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled.Jul 22 16:08:26 paolo-desktop kernel: [ 28.018147] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled.Jul 22 16:08:26 paolo-desktop kernel: [ 28.018338] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled.Jul 22 16:08:26 paolo-desktop kernel: [ 28.018529] ACPI: PCI Interrupt Link [LNK5] (IRQs *5 7 9 10 11 14 15)Jul 22 16:08:26 paolo-desktop kernel: [ 28.018719] ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled.Jul 22 16:08:26 paolo-desktop kernel: [ 28.018909] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled.Jul 22 16:08:26 paolo-desktop kernel: [ 28.019100] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.Jul 22 16:08:26 paolo-desktop kernel: [ 28.019292] ACPI: PCI Interrupt Link [LUBA] (IRQs *5 7 9 10 11 14 15)Jul 22 16:08:26 paolo-desktop kernel: [ 28.019481] ACPI: PCI Interrupt Link [LUBB] (IRQs 5 7 9 10 11 14 15) *0, disabled.Jul 22 16:08:26 paolo-desktop kernel: [ 28.019672] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 *11 14 15)Jul 22 16:08:26 paolo-desktop kernel: [ 28.019862] ACPI: PCI Interrupt Link [LACI] (IRQs 5 7 9 10 11 14 15) *0, disabled.Jul 22 16:08:26 paolo-desktop kernel: [ 28.020053] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 *11 14 15)Jul 22 16:08:26 paolo-desktop kernel: [ 28.020243] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.Jul 22 16:08:26 paolo-desktop kernel: [ 28.020433] ACPI: PCI Interrupt Link [LMCI] (IRQs 5 7 9 10 11 14 15) *0, disabled.Jul 22 16:08:26 paolo-desktop kernel: [ 28.020625] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 *10 11 14 15)Jul 22 16:08:26 paolo-desktop kernel: [ 28.020815] ACPI: PCI Interrupt Link [LUB2] (IRQs *5 7 9 10 11 14 15)Jul 22 16:08:26 paolo-desktop kernel: [ 28.021005] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.Jul 22 16:08:26 paolo-desktop kernel: [ 28.021196] ACPI: PCI Interrupt Link [LSID] (IRQs *5 7 9 10 11 14 15)Jul 22 16:08:26 paolo-desktop kernel: [ 28.021391] ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 10 *11 14 15)Jul 22 16:08:26 paolo-desktop kernel: [ 28.021610] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.Jul 22 16:08:26 paolo-desktop kernel: [ 28.021822] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.Jul 22 16:08:26 paolo-desktop kernel: [ 28.022034] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.Jul 22 16:08:26 paolo-desktop kernel: [ 28.022246] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.Jul 22 16:08:26 paolo-desktop kernel: [ 28.022457] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0Jul 22 16:08:26 paolo-desktop kernel: [ 28.022668] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled.Jul 22 16:08:26 paolo-desktop kernel: [ 28.022879] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled.Jul 22 16:08:26 paolo-desktop kernel: [ 28.023091] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.Jul 22 16:08:26 paolo-desktop kernel: [ 28.023303] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0Jul 22 16:08:26 paolo-desktop kernel: [ 28.023515] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.Jul 22 16:08:26 paolo-desktop kernel: [ 28.023727] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0Jul 22 16:08:26 paolo-desktop kernel: [ 28.023940] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled.Jul 22 16:08:26 paolo-desktop kernel: [ 28.024152] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.Jul 22 16:08:26 paolo-desktop kernel: [ 28.024364] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0Jul 22 16:08:26 paolo-desktop kernel: [ 28.024577] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.Jul 22 16:08:26 paolo-desktop kernel: [ 28.024790] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0Jul 22 16:08:26 paolo-desktop kernel: [ 28.025004] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0Jul 22 16:08:26 paolo-desktop kernel: [ 28.025219] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.Jul 22 16:08:26 paolo-desktop kernel: [ 28.025441] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.Jul 22 16:08:26 paolo-desktop kernel: [ 28.025657] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0Jul 22 16:08:26 paolo-desktop kernel: [ 28.025869] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0Jul 22 16:08:26 paolo-desktop kernel: [ 28.026000] Linux Plug and Play Support v0.97 (c) Adam BelayJul 22 16:08:26 paolo-desktop kernel: [ 28.026023] pnp: PnP ACPI initJul 22 16:08:26 paolo-desktop kernel: [ 28.026029] ACPI: bus type pnp registeredJul 22 16:08:26 paolo-desktop kernel: [ 28.031542] pnpacpi: exceeded the max number of mem resources: 12Jul 22 16:08:26 paolo-desktop kernel: [ 28.031644] pnp: PnP ACPI: found 14 devicesJul 22 16:08:26 paolo-desktop kernel: [ 28.031646] ACPI: ACPI bus type pnp unregisteredJul 22 16:08:26 paolo-desktop kernel: [ 28.031650] PnPBIOS: Disabled by ACPI PNPJul 22 16:08:26 paolo-desktop kernel: [ 28.031822] PCI: Using ACPI for IRQ routingJul 22 16:08:26 paolo-desktop kernel: [ 28.031826] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a reportJul 22 16:08:26 paolo-desktop kernel: [ 28.129132] NET: Registered protocol family 8Jul 22 16:08:26 paolo-desktop kernel: [ 28.129134] NET: Registered protocol family 20Jul 22 16:08:26 paolo-desktop kernel: [ 28.129190] AppArmor: AppArmor Filesystem EnabledJul 22 16:08:26 paolo-desktop kernel: [ 28.141144] system 00:01: ioport range 0x4000-0x407f has been reservedJul 22 16:08:26 paolo-desktop kernel: [ 28.141147] system 00:01: ioport range 0x4080-0x40ff has been reservedJul 22 16:08:26 paolo-desktop kernel: [ 28.141149] system 00:01: ioport range 0x4400-0x447f has been reservedJul 22 16:08:26 paolo-desktop kernel: [ 28.141151] system 00:01: ioport range 0x4480-0x44ff has been reservedJul 22 16:08:26 paolo-desktop kernel: [ 28.141154] system 00:01: ioport range 0x4800-0x487f has been reservedJul 22 16:08:26 paolo-desktop kernel: [ 28.141156] system 00:01: ioport range 0x4880-0x48ff has been reservedJul 22 16:08:26 paolo-desktop kernel: [ 28.141159] system 00:01: ioport range 0x2000-0x207f has been reservedJul 22 16:08:26 paolo-desktop kernel: [ 28.141161] system 00:01: ioport range 0x2080-0x20ff has been reservedJul 22 16:08:26 paolo-desktop kernel: [ 28.141166] system 00:01: iomem range 0x0-0x0 could not be reservedJul 22 16:08:26 paolo-desktop kernel: [ 28.141171] system 00:02: ioport range 0x4d0-0x4d1 has been reservedJul 22 16:08:26 paolo-desktop kernel: [ 28.141173] system 00:02: ioport range 0x800-0x87f has been reservedJul 22 16:08:26 paolo-desktop kernel: [ 28.141175] system 00:02: ioport range 0x290-0x297 has been reservedJul 22 16:08:26 paolo-desktop kernel: [ 28.141184] system 00:0c: iomem range 0xf0000000-0xf3ffffff could not be reservedJul 22 16:08:26 paolo-desktop kernel: [ 28.141189] system 00:0d: iomem range 0xf0000-0xf3fff could not be reservedJul 22 16:08:26 paolo-desktop kernel: [ 28.141191] system 00:0d: iomem range 0xf4000-0xf7fff could not be reservedJul 22 16:08:26 paolo-desktop kernel: [ 28.141193] system 00:0d: iomem range 0xf8000-0xfbfff could not be reservedJul 22 16:08:26 paolo-desktop kernel: [ 28.141196] system 00:0d: iomem range 0xfc000-0xfffff could not be reservedJul 22 16:08:26 paolo-desktop kernel: [ 28.141198] system 00:0d: iomem range 0x3fef0000-0x3fefffff could not be reservedJul 22 16:08:26 paolo-desktop kernel: [ 28.141201] system 00:0d: iomem range 0xffff0000-0xffffffff could not be reservedJul 22 16:08:26 paolo-desktop kernel: [ 28.141203] system 00:0d: iomem range 0x0-0x9ffff could not be reservedJul 22 16:08:26 paolo-desktop kernel: [ 28.141206] system 00:0d: iomem range 0x100000-0x3feeffff could not be reservedJul 22 16:08:26 paolo-desktop kernel: [ 28.141208] system 00:0d: iomem range 0x0-0x0 could not be reservedJul 22 16:08:26 paolo-desktop kernel: [ 28.141211] system 00:0d: iomem range 0xfec00000-0xfec00fff could not be reservedJul 22 16:08:26 paolo-desktop kernel: [ 28.141213] system 00:0d: iomem range 0xfee00000-0xfeefffff could not be reservedJul 22 16:08:26 paolo-desktop kernel: [ 28.141216] system 00:0d: iomem range 0xfefff000-0xfeffffff could not be reservedJul 22 16:08:26 paolo-desktop kernel: [ 28.171516] PCI: Bridge: 0000:00:02.0Jul 22 16:08:26 paolo-desktop kernel: [ 28.171518] IO window: a000-afffJul 22 16:08:26 paolo-desktop kernel: [ 28.171521] MEM window: fdd00000-fddfffffJul 22 16:08:26 paolo-desktop kernel: [ 28.171523] PREFETCH window: fda00000-fdafffffJul 22 16:08:26 paolo-desktop kernel: [ 28.171525] PCI: Bridge: 0000:00:03.0Jul 22 16:08:26 paolo-desktop kernel: [ 28.171527] IO window: 8000-8fffJul 22 16:08:26 paolo-desktop kernel: [ 28.171529] MEM window: fd900000-fd9fffffJul 22 16:08:26 paolo-desktop kernel: [ 28.171531] PREFETCH window: fde00000-fdefffffJul 22 16:08:26 paolo-desktop kernel: [ 28.171533] PCI: Bridge: 0000:00:04.0Jul 22 16:08:26 paolo-desktop kernel: [ 28.171535] IO window: b000-bfffJul 22 16:08:26 paolo-desktop kernel: [ 28.171537] MEM window: fa000000-fcffffffJul 22 16:08:26 paolo-desktop kernel: [ 28.171539] PREFETCH window: e0000000-efffffffJul 22 16:08:26 paolo-desktop kernel: [ 28.171541] PCI: Bridge: 0000:00:10.0Jul 22 16:08:26 paolo-desktop kernel: [ 28.171543] IO window: 9000-9fffJul 22 16:08:26 paolo-desktop kernel: [ 28.171546] MEM window: fdc00000-fdcfffffJul 22 16:08:26 paolo-desktop kernel: [ 28.171549] PREFETCH window: fdb00000-fdbfffffJul 22 16:08:26 paolo-desktop kernel: [ 28.171561] PCI: Setting latency timer of device 0000:00:02.0 to 64Jul 22 16:08:26 paolo-desktop kernel: [ 28.171567] PCI: Setting latency timer of device 0000:00:03.0 to 64Jul 22 16:08:26 paolo-desktop kernel: [ 28.171572] PCI: Setting latency timer of device 0000:00:04.0 to 64Jul 22 16:08:26 paolo-desktop kernel: [ 28.171579] PCI: Setting latency timer of device 0000:00:10.0 to 64Jul 22 16:08:26 paolo-desktop kernel: [ 28.171589] NET: Registered protocol family 2Jul 22 16:08:26 paolo-desktop kernel: [ 28.173084] Time: acpi_pm clocksource has been installed.Jul 22 16:08:26 paolo-desktop kernel: [ 28.173101] Switched to high resolution mode on CPU 0Jul 22 16:08:26 paolo-desktop kernel: [ 28.173642] Switched to high resolution mode on CPU 1Jul 22 16:08:26 paolo-desktop kernel: [ 28.209076] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)Jul 22 16:08:26 paolo-desktop kernel: [ 28.209333] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)Jul 22 16:08:26 paolo-desktop kernel: [ 28.210150] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)Jul 22 16:08:26 paolo-desktop kernel: [ 28.210580] TCP: Hash tables configured (established 131072 bind 65536)Jul 22 16:08:26 paolo-desktop kernel: [ 28.210583] TCP reno registeredJul 22 16:08:26 paolo-desktop kernel: [ 28.221131] checking if image is initramfs... it isJul 22 16:08:26 paolo-desktop kernel: [ 28.784340] Freeing initrd memory: 7700k freedJul 22 16:08:26 paolo-desktop kernel: [ 28.785565] audit: initializing netlink socket (disabled)Jul 22 16:08:26 paolo-desktop kernel: [ 28.785579] audit(1216735687.448:1): initializedJul 22 16:08:26 paolo-desktop kernel: [ 28.785719] highmem bounce pool size: 64 pagesJul 22 16:08:26 paolo-desktop kernel: [ 28.787345] VFS: Disk quotas dquot_6.5.1Jul 22 16:08:26 paolo-desktop kernel: [ 28.787408] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)Jul 22 16:08:26 paolo-desktop kernel: [ 28.787515] io scheduler noop registeredJul 22 16:08:26 paolo-desktop kernel: [ 28.787517] io scheduler anticipatory registeredJul 22 16:08:26 paolo-desktop kernel: [ 28.787519] io scheduler deadline registeredJul 22 16:08:26 paolo-desktop kernel: [ 28.787527] io scheduler cfq registered (default)Jul 22 16:08:26 paolo-desktop kernel: [ 28.801871] Boot video device is 0000:03:00.0Jul 22 16:08:26 paolo-desktop kernel: [ 28.801964] PCI: Setting latency timer of device 0000:00:02.0 to 64Jul 22 16:08:26 paolo-desktop kernel: [ 28.801984] assign_interrupt_mode Found MSI capabilityJul 22 16:08:26 paolo-desktop kernel: [ 28.802000] Allocate Port Service[0000:00:02.0:pcie00]Jul 22 16:08:26 paolo-desktop kernel: [ 28.802060] PCI: Setting latency timer of device 0000:00:03.0 to 64Jul 22 16:08:26 paolo-desktop kernel: [ 28.802078] assign_interrupt_mode Found MSI capabilityJul 22 16:08:26 paolo-desktop kernel: [ 28.802091] Allocate Port Service[0000:00:03.0:pcie00]Jul 22 16:08:26 paolo-desktop kernel: [ 28.802148] PCI: Setting latency timer of device 0000:00:04.0 to 64Jul 22 16:08:26 paolo-desktop kernel: [ 28.802166] assign_interrupt_mode Found MSI capabilityJul 22 16:08:26 paolo-desktop kernel: [ 28.802179] Allocate Port Service[0000:00:04.0:pcie00]Jul 22 16:08:26 paolo-desktop kernel: [ 28.802382] isapnp: Scanning for PnP cards...Jul 22 16:08:26 paolo-desktop kernel: [ 29.154800] isapnp: No Plug & Play device foundJul 22 16:08:26 paolo-desktop kernel: [ 29.179219] Real Time Clock Driver v1.12acJul 22 16:08:26 paolo-desktop kernel: [ 29.179340] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabledJul 22 16:08:26 paolo-desktop kernel: [ 29.179461] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550AJul 22 16:08:26 paolo-desktop kernel: [ 29.179988] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550AJul 22 16:08:26 paolo-desktop kernel: [ 29.180704] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksizeJul 22 16:08:26 paolo-desktop kernel: [ 29.180761] input: Macintosh mouse button emulation as /devices/virtual/input/input0Jul 22 16:08:26 paolo-desktop kernel: [ 29.180845] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12Jul 22 16:08:26 paolo-desktop kernel: [ 29.181184] serio: i8042 KBD port at 0x60,0x64 irq 1Jul 22 16:08:26 paolo-desktop kernel: [ 29.181189] serio: i8042 AUX port at 0x60,0x64 irq 12Jul 22 16:08:26 paolo-desktop kernel: [ 29.193481] mice: PS/2 mouse device common for all miceJul 22 16:08:26 paolo-desktop kernel: [ 29.193593] EISA: Probing bus 0 at eisa.0Jul 22 16:08:26 paolo-desktop kernel: [ 29.193600] Cannot allocate resource for EISA slot 2Jul 22 16:08:26 paolo-desktop kernel: [ 29.193605] Cannot allocate resource for EISA slot 4Jul 22 16:08:26 paolo-desktop kernel: [ 29.193614] Cannot allocate resource for EISA slot 8Jul 22 16:08:26 paolo-desktop kernel: [ 29.193616] EISA: Detected 0 cards.Jul 22 16:08:26 paolo-desktop kernel: [ 29.193618] cpuidle: using governor ladderJul 22 16:08:26 paolo-desktop kernel: [ 29.193620] cpuidle: using governor menuJul 22 16:08:26 paolo-desktop kernel: [ 29.193698] NET: Registered protocol family 1Jul 22 16:08:26 paolo-desktop kernel: [ 29.193722] Using IPI No-Shortcut modeJul 22 16:08:26 paolo-desktop kernel: [ 29.193753] registered taskstats version 1Jul 22 16:08:26 paolo-desktop kernel: [ 29.193864] Magic number: 0:209:132Jul 22 16:08:26 paolo-desktop kernel: [ 29.194016] hash matches device device:07Jul 22 16:08:26 paolo-desktop kernel: [ 29.194022] BIOS EDD facility v0.16 2004-Jun-25, 0 devices foundJul 22 16:08:26 paolo-desktop kernel: [ 29.194024] EDD information not available.Jul 22 16:08:26 paolo-desktop kernel: [ 29.194263] Freeing unused kernel memory: 364k freedJul 22 16:08:26 paolo-desktop kernel: [ 29.209374] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1Jul 22 16:08:26 paolo-desktop kernel: [ 30.421951] fuse init (API version 7.9)Jul 22 16:08:26 paolo-desktop kernel: [ 30.437323] ACPI: Fan [FAN] (on)Jul 22 16:08:26 paolo-desktop kernel: [ 30.443019] ACPI: Thermal Zone [THRM] (40 C)Jul 22 16:08:26 paolo-desktop kernel: [ 30.954112] usbcore: registered new interface driver usbfsJul 22 16:08:26 paolo-desktop kernel: [ 30.954139] usbcore: registered new interface driver hubJul 22 16:08:26 paolo-desktop kernel: [ 30.954165] usbcore: registered new device driver usbJul 22 16:08:26 paolo-desktop kernel: [ 30.968221] SCSI subsystem initializedJul 22 16:08:26 paolo-desktop kernel: [ 30.975201] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) DriverJul 22 16:08:26 paolo-desktop kernel: [ 30.975663] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23Jul 22 16:08:26 paolo-desktop kernel: [ 30.975674] ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [APCF] -> GSI 23 (level, low) -> IRQ 16Jul 22 16:08:26 paolo-desktop kernel: [ 30.975688] PCI: Setting latency timer of device 0000:00:0b.0 to 64Jul 22 16:08:26 paolo-desktop kernel: [ 30.975691] ohci_hcd 0000:00:0b.0: OHCI Host ControllerJul 22 16:08:26 paolo-desktop kernel: [ 30.975972] ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 1Jul 22 16:08:26 paolo-desktop kernel: [ 30.975990] ohci_hcd 0000:00:0b.0: irq 16, io mem 0xfe02f000Jul 22 16:08:26 paolo-desktop kernel: [ 30.995634] libata version 3.00 loaded.Jul 22 16:08:26 paolo-desktop kernel: [ 31.033565] usb usb1: configuration #1 chosen from 1 choiceJul 22 16:08:26 paolo-desktop kernel: [ 31.033587] hub 1-0:1.0: USB hub foundJul 22 16:08:26 paolo-desktop kernel: [ 31.033595] hub 1-0:1.0: 8 ports detectedJul 22 16:08:26 paolo-desktop kernel: [ 31.083500] Floppy drive(s): fd0 is 1.44MJul 22 16:08:26 paolo-desktop kernel: [ 31.103181] FDC 0 is a post-1991 82077Jul 22 16:08:26 paolo-desktop kernel: [ 31.135857] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22Jul 22 16:08:26 paolo-desktop kernel: [ 31.135868] ACPI: PCI Interrupt 0000:00:0b.1[B] -> Link [APCL] -> GSI 22 (level, low) -> IRQ 17Jul 22 16:08:26 paolo-desktop kernel: [ 31.135880] PCI: Setting latency timer of device 0000:00:0b.1 to 64Jul 22 16:08:26 paolo-desktop kernel: [ 31.135883] ehci_hcd 0000:00:0b.1: EHCI Host ControllerJul 22 16:08:26 paolo-desktop kernel: [ 31.135905] ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 2Jul 22 16:08:26 paolo-desktop kernel: [ 31.135934] ehci_hcd 0000:00:0b.1: debug port 1Jul 22 16:08:26 paolo-desktop kernel: [ 31.135938] PCI: cache line size of 64 is not supported by device 0000:00:0b.1Jul 22 16:08:26 paolo-desktop kernel: [ 31.135949] ehci_hcd 0000:00:0b.1: irq 17, io mem 0xfe02e000Jul 22 16:08:26 paolo-desktop kernel: [ 31.147284] ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004Jul 22 16:08:26 paolo-desktop kernel: [ 31.147373] usb usb2: configuration #1 chosen from 1 choiceJul 22 16:08:26 paolo-desktop kernel: [ 31.147392] hub 2-0:1.0: USB hub foundJul 22 16:08:26 paolo-desktop kernel: [ 31.147396] hub 2-0:1.0: 8 ports detectedJul 22 16:08:26 paolo-desktop kernel: [ 31.251342] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.Jul 22 16:08:26 paolo-desktop kernel: [ 31.251720] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 21Jul 22 16:08:26 paolo-desktop kernel: [ 31.251730] ACPI: PCI Interrupt 0000:00:14.0[A] -> Link [APCH] -> GSI 21 (level, low) -> IRQ 18Jul 22 16:08:26 paolo-desktop kernel: [ 31.251736] PCI: Setting latency timer of device 0000:00:14.0 to 64Jul 22 16:08:26 paolo-desktop kernel: [ 31.770012] forcedeth 0000:00:14.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:17:31:90:a4:d8Jul 22 16:08:26 paolo-desktop kernel: [ 31.770017] forcedeth 0000:00:14.0: highdma pwrctl timirq gbit lnktim desc-v3Jul 22 16:08:26 paolo-desktop kernel: [ 31.770336] PCI: Setting latency timer of device 0000:00:0d.0 to 64Jul 22 16:08:26 paolo-desktop kernel: [ 31.770737] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 20Jul 22 16:08:26 paolo-desktop kernel: [ 31.770746] ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [APSI] -> GSI 20 (level, low) -> IRQ 19Jul 22 16:08:26 paolo-desktop kernel: [ 31.770763] PCI: Setting latency timer of device 0000:00:0e.0 to 64Jul 22 16:08:26 paolo-desktop kernel: [ 31.770771] ACPI: PCI interrupt for device 0000:00:0e.0 disabledJul 22 16:08:26 paolo-desktop kernel: [ 31.771084] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 23Jul 22 16:08:26 paolo-desktop kernel: [ 31.771086] ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [APSJ] -> GSI 23 (level, low) -> IRQ 16Jul 22 16:08:26 paolo-desktop kernel: [ 31.771102] PCI: Setting latency timer of device 0000:00:0f.0 to 64Jul 22 16:08:26 paolo-desktop kernel: [ 31.771110] ACPI: PCI interrupt for device 0000:00:0f.0 disabledJul 22 16:08:26 paolo-desktop kernel: [ 31.770958] sata_nv 0000:00:0e.0: version 3.5Jul 22 16:08:26 paolo-desktop kernel: [ 31.770974] ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [APSI] -> GSI 20 (level, low) -> IRQ 19Jul 22 16:08:26 paolo-desktop kernel: [ 31.771017] PCI: Setting latency timer of device 0000:00:0e.0 to 64Jul 22 16:08:26 paolo-desktop kernel: [ 31.771154] scsi0 : sata_nvJul 22 16:08:26 paolo-desktop kernel: [ 31.771341] scsi1 : sata_nvJul 22 16:08:26 paolo-desktop kernel: [ 31.771509] ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xe000 irq 19Jul 22 16:08:26 paolo-desktop kernel: [ 31.771512] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xe008 irq 19Jul 22 16:08:26 paolo-desktop kernel: [ 31.837065] usb 1-4: new full speed USB device using ohci_hcd and address 2Jul 22 16:08:26 paolo-desktop kernel: [ 32.050475] usb 1-4: configuration #1 chosen from 1 choiceJul 22 16:08:26 paolo-desktop kernel: [ 32.084790] ata1: SATA link down (SStatus 0 SControl 300)Jul 22 16:08:26 paolo-desktop kernel: [ 32.404444] ata2: SATA link down (SStatus 0 SControl 300)Jul 22 16:08:26 paolo-desktop kernel: [ 32.414907] ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [APSJ] -> GSI 23 (level, low) -> IRQ 16Jul 22 16:08:26 paolo-desktop kernel: [ 32.414946] PCI: Setting latency timer of device 0000:00:0f.0 to 64Jul 22 16:08:26 paolo-desktop kernel: [ 32.414991] scsi2 : sata_nvJul 22 16:08:26 paolo-desktop kernel: [ 32.415844] scsi3 : sata_nvJul 22 16:08:26 paolo-desktop kernel: [ 32.416009] ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xcc00 irq 16Jul 22 16:08:26 paolo-desktop kernel: [ 32.416012] ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xcc08 irq 16Jul 22 16:08:26 paolo-desktop kernel: [ 32.724093] ata3: SATA link down (SStatus 0 SControl 300)Jul 22 16:08:26 paolo-desktop kernel: [ 33.043738] ata4: SATA link down (SStatus 0 SControl 300)Jul 22 16:08:26 paolo-desktop kernel: [ 33.057852] pata_amd 0000:00:0d.0: version 0.3.10Jul 22 16:08:26 paolo-desktop kernel: [ 33.057900] PCI: Setting latency timer of device 0000:00:0d.0 to 64Jul 22 16:08:26 paolo-desktop kernel: [ 33.060321] scsi4 : pata_amdJul 22 16:08:26 paolo-desktop kernel: [ 33.060375] scsi5 : pata_amdJul 22 16:08:26 paolo-desktop kernel: [ 33.060981] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf400 irq 14Jul 22 16:08:26 paolo-desktop kernel: [ 33.060983] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf408 irq 15Jul 22 16:08:26 paolo-desktop kernel: [ 33.225832] ata5.00: ATA-7: Maxtor 6L080P0, BAJ41G20, max UDMA/133Jul 22 16:08:26 paolo-desktop kernel: [ 33.225836] ata5.00: 160086528 sectors, multi 1: LBA Jul 22 16:08:26 paolo-desktop kernel: [ 33.241744] ata5.00: configured for UDMA/133Jul 22 16:08:26 paolo-desktop kernel: [ 33.559462] ata6.00: ATAPI: HL-DT-ST DVDRAM GSA-H10N, JL10, max UDMA/33Jul 22 16:08:26 paolo-desktop kernel: [ 33.731209] ata6.00: configured for UDMA/33Jul 22 16:08:26 paolo-desktop kernel: [ 33.731784] scsi 4:0:0:0: Direct-Access ATA Maxtor 6L080P0 BAJ4 PQ: 0 ANSI: 5Jul 22 16:08:26 paolo-desktop kernel: [ 33.735580] scsi 5:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-H10N JL10 PQ: 0 ANSI: 5Jul 22 16:08:26 paolo-desktop kernel: [ 33.743152] Driver 'sd' needs updating - please use bus_type methodsJul 22 16:08:26 paolo-desktop kernel: [ 33.743236] sd 4:0:0:0: [sda] 160086528 512-byte hardware sectors (81964 MB)Jul 22 16:08:26 paolo-desktop kernel: [ 33.743247] sd 4:0:0:0: [sda] Write Protect is offJul 22 16:08:26 paolo-desktop kernel: [ 33.743249] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00Jul 22 16:08:26 paolo-desktop kernel: [ 33.743262] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUAJul 22 16:08:26 paolo-desktop kernel: [ 33.743303] sd 4:0:0:0: [sda] 160086528 512-byte hardware sectors (81964 MB)Jul 22 16:08:26 paolo-desktop kernel: [ 33.743310] sd 4:0:0:0: [sda] Write Protect is offJul 22 16:08:26 paolo-desktop kernel: [ 33.743312] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00Jul 22 16:08:26 paolo-desktop kernel: [ 33.743324] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUAJul 22 16:08:26 paolo-desktop kernel: [ 33.743326] sda:<4>Driver 'sr' needs updating - please use bus_type methodsJul 22 16:08:26 paolo-desktop kernel: [ 33.760929] sda1 sda2 < sda5 >Jul 22 16:08:26 paolo-desktop kernel: [ 33.778274] sd 4:0:0:0: [sda] Attached SCSI diskJul 22 16:08:26 paolo-desktop kernel: [ 33.782196] sd 4:0:0:0: Attached scsi generic sg0 type 0Jul 22 16:08:26 paolo-desktop kernel: [ 33.782213] sr 5:0:0:0: Attached scsi generic sg1 type 5Jul 22 16:08:26 paolo-desktop kernel: [ 33.798315] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda trayJul 22 16:08:26 paolo-desktop kernel: [ 33.798320] Uniform CD-ROM driver Revision: 3.20Jul 22 16:08:26 paolo-desktop kernel: [ 33.798367] sr 5:0:0:0: Attached scsi CD-ROM sr0Jul 22 16:08:26 paolo-desktop kernel: [ 34.027193] Attempting manual resumeJul 22 16:08:26 paolo-desktop kernel: [ 34.027197] swsusp: Resume From Partition 8:5Jul 22 16:08:26 paolo-desktop kernel: [ 34.027198] PM: Checking swsusp image.Jul 22 16:08:26 paolo-desktop kernel: [ 34.027349] PM: Resume from disk failed.Jul 22 16:08:26 paolo-desktop kernel: [ 34.047343] kjournald starting. Commit interval 5 secondsJul 22 16:08:26 paolo-desktop kernel: [ 34.047817] EXT3-fs: mounted filesystem with ordered data mode.Jul 22 16:08:26 paolo-desktop kernel: [ 40.233203] input: Power Button (FF) as /devices/virtual/input/input2Jul 22 16:08:26 paolo-desktop kernel: [ 40.240451] pci_hotplug: PCI Hot Plug PCI Core version: 0.5Jul 22 16:08:26 paolo-desktop kernel: [ 40.245325] ACPI: Power Button (FF) [PWRF]Jul 22 16:08:26 paolo-desktop kernel: [ 40.245436] input: Power Button (CM) as /devices/virtual/input/input3Jul 22 16:08:26 paolo-desktop kernel: [ 40.259988] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4Jul 22 16:08:26 paolo-desktop kernel: [ 40.269273] ACPI: Power Button (CM) [PWRB]Jul 22 16:08:26 paolo-desktop kernel: [ 41.382714] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x4c00Jul 22 16:08:26 paolo-desktop kernel: [ 41.382741] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x4c40Jul 22 16:08:26 paolo-desktop kernel: [ 41.558740] Linux agpgart interface v0.102Jul 22 16:08:26 paolo-desktop kernel: [ 41.779938] Linux video capture interface: v2.00Jul 22 16:08:26 paolo-desktop kernel: [ 41.907597] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: USB GSPCA camera found. (PAC207)Jul 22 16:08:26 paolo-desktop kernel: [ 41.918172] usbcore: registered new interface driver gspcaJul 22 16:08:26 paolo-desktop kernel: [ 41.918178] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: gspca driver 01.00.20 registeredJul 22 16:08:26 paolo-desktop kernel: [ 41.972657] input: PC Speaker as /devices/platform/pcspkr/input/input4Jul 22 16:08:26 paolo-desktop kernel: [ 42.183384] parport_pc 00:09: reported by Plug and Play ACPIJul 22 16:08:26 paolo-desktop kernel: [ 42.183413] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]Jul 22 16:08:26 paolo-desktop kernel: [ 42.378273] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 22Jul 22 16:08:26 paolo-desktop kernel: [ 42.378278] ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [AAZA] -> GSI 22 (level, low) -> IRQ 17Jul 22 16:08:26 paolo-desktop kernel: [ 42.378299] PCI: Setting latency timer of device 0000:00:10.1 to 64Jul 22 16:08:26 paolo-desktop kernel: [ 42.857366] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input5Jul 22 16:08:26 paolo-desktop kernel: [ 43.662215] lp0: using parport0 (interrupt-driven).Jul 22 16:08:26 paolo-desktop kernel: [ 43.719534] Adding 3020180k swap on /dev/sda5. Priority:-1 extents:1 across:3020180kJul 22 16:08:26 paolo-desktop kernel: [ 44.268199] EXT3 FS on sda1, internal journalJul 22 16:08:26 paolo-desktop kernel: [ 45.441674] ip_tables: (C) 2000-2006 Netfilter Core TeamJul 22 16:08:26 paolo-desktop kernel: [ 45.840012] No dock devices found.Jul 22 16:08:26 paolo-desktop kernel: [ 46.224118] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ processors (2 cpu cores) (version 2.20.00)Jul 22 16:08:26 paolo-desktop kernel: [ 46.223691] powernow-k8: MP systems not supported by PSB BIOS structureJul 22 16:08:26 paolo-desktop kernel: [ 46.224164] powernow-k8: MP systems not supported by PSB BIOS structureJul 22 16:08:26 paolo-desktop kernel: [ 46.869141] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)Jul 22 16:08:26 paolo-desktop kernel: [ 46.869146] apm: disabled - APM is not SMP safe.Jul 22 16:08:26 paolo-desktop kernel: [ 46.994865] ppdev: user-space parallel port driverJul 22 16:08:26 paolo-desktop kernel: [ 47.087385] audit(1216735706.515:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5135 profile="/usr/sbin/cupsd" namespace="default"Jul 22 16:08:27 paolo-desktop kernel: [ 48.012279] Bluetooth: Core ver 2.11Jul 22 16:08:27 paolo-desktop kernel: [ 48.013581] NET: Registered protocol family 31Jul 22 16:08:27 paolo-desktop kernel: [ 48.013585] Bluetooth: HCI device and connection manager initializedJul 22 16:08:27 paolo-desktop kernel: [ 48.013589] Bluetooth: HCI socket layer initializedJul 22 16:08:27 paolo-desktop kernel: [ 48.034742] Bluetooth: L2CAP ver 2.9Jul 22 16:08:27 paolo-desktop kernel: [ 48.034747] Bluetooth: L2CAP socket layer initializedJul 22 16:08:27 paolo-desktop kernel: [ 48.073090] Bluetooth: RFCOMM socket layer initializedJul 22 16:08:27 paolo-desktop kernel: [ 48.073106] Bluetooth: RFCOMM TTY layer initializedJul 22 16:08:27 paolo-desktop kernel: [ 48.073108] Bluetooth: RFCOMM ver 1.8Jul 22 16:08:31 paolo-desktop kernel: [ 52.098212] NET: Registered protocol family 17Jul 22 16:08:36 paolo-desktop kernel: [ 56.842603] NET: Registered protocol family 10Jul 22 16:08:36 paolo-desktop kernel: [ 56.842819] lo: Disabled Privacy ExtensionsJul 22 16:08:46 paolo-desktop kernel: [ 67.275436] eth0: no IPv6 routers presentJul 22 16:10:23 paolo-desktop kernel: [ 163.961213] UDF-fs: No VRS foundJul 22 16:10:23 paolo-desktop kernel: [ 164.042379] ISO 9660 Extensions: Microsoft Joliet Level 3Jul 22 16:10:23 paolo-desktop kernel: [ 164.091312] ISO 9660 Extensions: RRIP_1991AJul 22 21:10:26 paolo-desktop kernel: [18146.814031] lirc_dev: IR Remote Control driver registered, at major 61 Jul 22 21:10:26 paolo-desktop kernel: [18146.932453] bttv: driver version 0.9.17 loadedJul 22 21:10:26 paolo-desktop kernel: [18146.932459] bttv: using 8 buffers with 2080k (520 pages) each for captureJul 22 21:10:26 paolo-desktop kernel: [18146.997446] ivtv: Start initialization, version 1.1.0Jul 22 21:10:26 paolo-desktop kernel: [18146.997493] ivtv: End initializationJul 22 21:10:26 paolo-desktop kernel: [18147.025769] cx88/0: cx2388x v4l2 driver version 0.0.6 loadedJul 22 21:49:01 paolo-desktop kernel: [20459.575869] gdm[5448]: segfault at 10c05150 eip b77e5635 esp bf9feda0 error 4Jul 22 21:49:10 paolo-desktop kernel: [20468.930131] ip6_tables: (C) 2000-2006 Netfilter Core TeamJul 22 21:50:17 paolo-desktop kernel: Inspecting /boot/System.map-2.6.24-19-genericJul 22 21:50:17 paolo-desktop kernel: Loaded 27884 symbols from /boot/System.map-2.6.24-19-generic.Jul 22 21:50:17 paolo-desktop kernel: Symbols match kernel version 2.6.24.Jul 22 21:50:17 paolo-desktop kernel: Loaded 16714 symbols from 81 modules.Jul 22 21:50:17 paolo-desktop kernel: [ 0.000000] Initializing cgroup subsys cpusetJul 22 21:50:17 paolo-desktop kernel: [ 0.000000] Initializing cgroup subsys cpuJul 22 21:50:17 paolo-desktop kernel: [ 0.000000] Linux version 2.6.24-19-generic (buildd@terranova) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Fri Jul 11 23:41:49 UTC 2008 (Ubuntu 2.6.24-19.36-generic)Jul 22 21:50:17 paolo-desktop kernel: [ 0.000000] BIOS-provided physical RAM map:Jul 22 21:50:17 paolo-desktop kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)Jul 22 21:50:17 paolo-desktop kernel: [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)Jul 22 21:50:17 paolo-desktop kernel: [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)Jul 22 21:50:17 paolo-desktop kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 000000003fef0000 (usable)Jul 22 21:50:17 paolo-desktop kernel: [ 0.000000] BIOS-e820: 000000003fef0000 - 000000003fef3000 (ACPI NVS)Jul 22 21:50:17 paolo-desktop kernel: [ 0.000000] BIOS-e820: 000000003fef3000 - 000000003ff00000 (ACPI data)Jul 22 21:50:17 paolo-desktop kernel: [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)Jul 22 21:50:17 paolo-desktop kernel: [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)Jul 22 21:50:17 paolo-desktop kernel: [ 0.000000] 126MB HIGHMEM available.Jul 22 21:50:17 paolo-desktop kernel: [ 0.000000] 896MB LOWMEM available.Jul 22 21:50:17 paolo-desktop kernel: [ 0.000000] found SMP MP-table at 000f5790Jul 22 21:50:17 paolo-desktop kernel: [ 0.000000] Entering add_active_range(0, 0, 261872) 0 entries of 256 usedJul 22 21:50:17 paolo-desktop kernel: [ 0.000000] Zone PFN ranges:Jul 22 21:50:17 paolo-desktop kernel: [ 0.000000] DMA 0 -> 4096Jul 22 21:50:17 paolo-desktop kernel: [ 0.000000] Normal 4096 -> 229376Jul 22 21:50:17 paolo-desktop kernel: [ 0.000000] HighMem 229376 -> 261872Jul 22 21:50:17 paolo-desktop kernel: [ 0.000000] Movable zone start PFN for each nodeJul 22 21:50:17 paolo-desktop kernel: [ 0.000000] early_node_map[1] active PFN rangesJul 22 21:50:17 paolo-desktop kernel: [ 0.000000] 0: 0 -> 261872Jul 22 21:50:17 paolo-desktop kernel: [ 0.000000] On node 0 totalpages: 261872Jul 22 21:50:17 paolo-desktop kernel: [ 0.000000] DMA zone: 32 pages used for memmapJul 22 21:50:17 paolo-desktop kernel: [ 0.000000] DMA zone: 0 pages reservedJul 22 21:50:17 paolo-desktop kernel: [ 0.000000] DMA zone: 4064 pages, LIFO batch:0Jul 22 21:50:17 paolo-desktop kernel: [ 0.000000] Normal zone: 1760 pages used for memmapJul 22 21:50:17 paolo-desktop kernel: [ 0.000000] Normal zone: 223520 pages, LIFO batch:31Jul 22 21:50:17 paolo-desktop kernel: [ 0.000000] HighMem zone: 253 pages used for memmapJul 22 21:50:17 paolo-desktop kernel: [ 0.000000] HighMem zone: 32243 pages, LIFO batch:7Jul 22 21:50:17 paolo-desktop kernel: [ 0.000000] Movable zone: 0 pages used for memmapJul 22 21:50:17 paolo-desktop kernel: [ 0.000000] DMI 2.3 present.Jul 22 21:50:17 paolo-desktop kernel: [ 0.000000] ACPI: RSDP signature @ 0xC00F7240 checksum 0Jul 22 21:50:17 paolo-desktop kernel: [ 0.000000] ACPI: RSDP 000F7240, 0014 (r0 Nvidia)Jul 22 21:50:17 paolo-desktop kernel: [ 0.000000] ACPI: RSDT 3FEF3040, 0030 (r1 Nvidia AWRDACPI 42302E31 AWRD 0)Jul 22 21:50:17 paolo-desktop kernel: [ 0.000000] ACPI: FACP 3FEF30C0, 0074 (r1 Nvidia AWRDACPI 42302E31 AWRD 0)Jul 22 21:50:17 paolo-desktop kernel: [ 0.000000] ACPI: DSDT 3FEF3180, 7CAE (r1 NVIDIA AWRDACPI 1000 MSFT 100000E)Jul 22 21:50:17 paolo-desktop kernel: [ 0.000000] ACPI: FACS 3FEF0000, 0040Jul 22 21:50:17 paolo-desktop kernel: [ 0.000000] ACPI: MCFG 3FEFAF40, 003C (r1 Nvidia AWRDACPI 42302E31 AWRD 0)Jul 22 21:50:17 paolo-desktop kernel: [ 0.000000] ACPI: APIC 3FEFAE80, 007C (r1 Nvidia AWRDACPI 42302E31 AWRD 0)Jul 22 21:50:17 paolo-desktop kernel: [ 0.000000] Nvidia board detected. Ignoring ACPI timer override.Jul 22 21:50:17 paolo-desktop kernel: [ 0.000000] If you got timer trouble try acpi_use_timer_overrideJul 22 21:50:17 paolo-desktop kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x4008Jul 22 21:50:17 paolo-desktop kernel: [ 0.000000] ACPI: Local APIC address 0xfee00000Jul 22 21:50:17 paolo-desktop kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)Jul 22 21:50:17 paolo-desktop kernel: [ 0.000000] Processor #0 15:11 APIC version 16Jul 22 21:50:17 paolo-desktop kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)Jul 22 21:50:17 paolo-desktop kernel: [ 0.000000] Processor #1 15:11 APIC version 16Jul 22 21:50:17 paolo-desktop kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])Jul 22 21:50:17 paolo-desktop kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])Jul 22 21:50:17 paolo-desktop kernel: [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])Jul 22 21:50:17 paolo-desktop kernel: [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23Jul 22 21:50:17 paolo-desktop kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)Jul 22 21:50:17 paolo-desktop kernel: [ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored.Jul 22 21:50:17 paolo-desktop kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)Jul 22 21:50:17 paolo-desktop kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)Jul 22 21:50:17 paolo-desktop kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)Jul 22 21:50:17 paolo-desktop kernel: [ 0.000000] ACPI: IRQ9 used by override.Jul 22 21:50:17 paolo-desktop kernel: [ 0.000000] ACPI: IRQ14 used by override.Jul 22 21:50:17 paolo-desktop kernel: [ 0.000000] ACPI: IRQ15 used by override.Jul 22 21:50:17 paolo-desktop kernel: [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICsJul 22 21:50:17 paolo-desktop kernel: [ 0.000000] Using ACPI (MADT) for SMP configuration informationJul 22 21:50:17 paolo-desktop kernel: [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 3ff00000:b0100000)Jul 22 21:50:17 paolo-desktop kernel: [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000Jul 22 21:50:17 paolo-desktop kernel: [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000Jul 22 21:50:17 paolo-desktop kernel: [ 0.000000] swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000Jul 22 21:50:17 paolo-desktop kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259827Jul 22 21:50:17 paolo-desktop kernel: [ 0.000000] Kernel command line: root=UUID=50de9f9b-1da6-43e0-9750-d75c6ac2d2de ro quiet splashJul 22 21:50:17 paolo-desktop kernel: [ 0.000000] mapped APIC to ffffb000 (fee00000)Jul 22 21:50:17 paolo-desktop kernel: [ 0.000000] mapped IOAPIC to ffffa000 (fec00000)Jul 22 21:50:17 paolo-desktop kernel: [ 0.000000] Enabling fast FPU save and restore... done.Jul 22 21:50:17 paolo-desktop kernel: [ 0.000000] Enabling unmasked SIMD FPU exception support... done.Jul 22 21:50:17 paolo-desktop kernel: [ 0.000000] Initializing CPU#0Jul 22 21:50:17 paolo-desktop kernel: [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)Jul 22 21:50:17 paolo-desktop kernel: [ 0.000000] Detected 2204.647 MHz processor.Jul 22 21:50:17 paolo-desktop kernel: [ 32.947904] spurious 8259A interrupt: IRQ7.Jul 22 21:50:17 paolo-desktop kernel: [ 32.950058] Console: colour VGA+ 80x25Jul 22 21:50:17 paolo-desktop kernel: [ 32.950061] console [tty0] enabledJul 22 21:50:17 paolo-desktop kernel: [ 32.950421] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)Jul 22 21:50:17 paolo-desktop kernel: [ 32.950797] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)Jul 22 21:50:17 paolo-desktop kernel: [ 32.972404] Memory: 1025968k/1047488k available (2177k kernel code, 20896k reserved, 1006k data, 368k init, 129984k highmem)Jul 22 21:50:17 paolo-desktop kernel: [ 32.972411] virtual kernel memory layout:Jul 22 21:50:17 paolo-desktop kernel: [ 32.972412] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB)Jul 22 21:50:17 paolo-desktop kernel: [ 32.972413] pkmap : 0xff800000 - 0xffc00000 (4096 kB)Jul 22 21:50:17 paolo-desktop kernel: [ 32.972414] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)Jul 22 21:50:17 paolo-desktop kernel: [ 32.972415] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)Jul 22 21:50:17 paolo-desktop kernel: [ 32.972416] .init : 0xc0421000 - 0xc047d000 ( 368 kB)Jul 22 21:50:17 paolo-desktop kernel: [ 32.972417] .data : 0xc0320474 - 0xc041bdc4 (1006 kB)Jul 22 21:50:17 paolo-desktop kernel: [ 32.972418] .text : 0xc0100000 - 0xc0320474 (2177 kB)Jul 22 21:50:17 paolo-desktop kernel: [ 32.972421] Checking if this processor honours the WP bit even in supervisor mode... Ok.Jul 22 21:50:17 paolo-desktop kernel: [ 32.972455] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1Jul 22 21:50:17 paolo-desktop kernel: [ 33.052400] Calibrating delay using timer specific routine.. 4413.23 BogoMIPS (lpj=8826464)Jul 22 21:50:17 paolo-desktop kernel: [ 33.052425] Security Framework initializedJul 22 21:50:17 paolo-desktop kernel: [ 33.052431] SELinux: Disabled at boot.Jul 22 21:50:17 paolo-desktop kernel: [ 33.052445] AppArmor: AppArmor initializedJul 22 21:50:17 paolo-desktop kernel: [ 33.052448] Failure registering capabilities with primary security module.Jul 22 21:50:17 paolo-desktop kernel: [ 33.052456] Mount-cache hash table entries: 512Jul 22 21:50:17 paolo-desktop kernel: [ 33.052565] Initializing cgroup subsys nsJul 22 21:50:17 paolo-desktop kernel: [ 33.052569] Initializing cgroup subsys cpuacctJul 22 21:50:17 paolo-desktop kernel: [ 33.052578] CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000001f 00000000Jul 22 21:50:17 paolo-desktop kernel: [ 33.052586] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)Jul 22 21:50:17 paolo-desktop kernel: [ 33.052588] CPU: L2 Cache: 512K (64 bytes/line)Jul 22 21:50:17 paolo-desktop kernel: [ 33.052590] CPU 0(2) -> Core 0Jul 22 21:50:17 paolo-desktop kernel: [ 33.052592] CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000001f 00000000Jul 22 21:50:17 paolo-desktop kernel: [ 33.052600] Compat vDSO mapped to ffffe000.Jul 22 21:50:17 paolo-desktop kernel: [ 33.052611] Checking 'hlt' instruction... OK.Jul 22 21:50:17 paolo-desktop kernel: [ 33.068661] SMP alternatives: switching to UP codeJul 22 21:50:17 paolo-desktop kernel: [ 33.069796] Early unpacking initramfs... doneJul 22 21:50:17 paolo-desktop kernel: [ 33.360888] ACPI: Core revision 20070126Jul 22 21:50:17 paolo-desktop kernel: [ 33.360953] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.Jul 22 21:50:17 paolo-desktop kernel: [ 33.365725] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ stepping 02Jul 22 21:50:17 paolo-desktop kernel: [ 33.365740] SMP alternatives: switching to SMP codeJul 22 21:50:17 paolo-desktop kernel: [ 33.366156] Booting processor 1/1 eip 3000Jul 22 21:50:17 paolo-desktop kernel: [ 33.376638] Initializing CPU#1Jul 22 21:50:17 paolo-desktop kernel: [ 33.456510] Calibrating delay using timer specific routine.. 4409.52 BogoMIPS (lpj=8819056)Jul 22 21:50:17 paolo-desktop kernel: [ 33.456515] CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000001f 00000000Jul 22 21:50:17 paolo-desktop kernel: [ 33.456521] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)Jul 22 21:50:17 paolo-desktop kernel: [ 33.456523] CPU: L2 Cache: 512K (64 bytes/line)Jul 22 21:50:17 paolo-desktop kernel: [ 33.456525] CPU 1(2) -> Core 1Jul 22 21:50:17 paolo-desktop kernel: [ 33.456526] CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000001f 00000000Jul 22 21:50:17 paolo-desktop kernel: [ 33.456163] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ stepping 02Jul 22 21:50:17 paolo-desktop kernel: [ 33.456177] Total of 2 processors activated (8822.76 BogoMIPS).Jul 22 21:50:17 paolo-desktop kernel: [ 33.456473] ENABLING IO-APIC IRQsJul 22 21:50:17 paolo-desktop kernel: [ 33.456707] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1Jul 22 21:50:17 paolo-desktop kernel: [ 33.496408] ..MP-BIOS bug: 8254 timer not connected to IO-APICJul 22 21:50:17 paolo-desktop kernel: [ 33.496458] ...trying to set up timer (IRQ0) through the 8259A ... failed.Jul 22 21:50:17 paolo-desktop kernel: [ 33.496460] ...trying to set up timer as Virtual Wire IRQ... failed.Jul 22 21:50:17 paolo-desktop kernel: [ 33.536141] ...trying to set up timer as ExtINT IRQ... works.Jul 22 21:50:17 paolo-desktop kernel: [ 33.779802] Brought up 2 CPUsJul 22 21:50:17 paolo-desktop kernel: [ 33.779857] CPU0 attaching sched-domain:Jul 22 21:50:17 paolo-desktop kernel: [ 33.779860] domain 0: span 03Jul 22 21:50:17 paolo-desktop kernel: [ 33.779861] groups: 01 02Jul 22 21:50:17 paolo-desktop kernel: [ 33.779864] CPU1 attaching sched-domain:Jul 22 21:50:17 paolo-desktop kernel: [ 33.779865] domain 0: span 03Jul 22 21:50:17 paolo-desktop kernel: [ 33.779867] groups: 02 01Jul 22 21:50:17 paolo-desktop kernel: [ 33.780047] net_namespace: 64 bytesJul 22 21:50:17 paolo-desktop kernel: [ 33.780053] Booting paravirtualized kernel on bare hardwareJul 22 21:50:17 paolo-desktop kernel: [ 33.780447] Time: 19:49:57 Date: 07/22/08Jul 22 21:50:17 paolo-desktop kernel: [ 33.780472] NET: Registered protocol family 16Jul 22 21:50:17 paolo-desktop kernel: [ 33.780627] EISA bus registeredJul 22 21:50:17 paolo-desktop kernel: [ 33.780631] ACPI: bus type pci registeredJul 22 21:50:17 paolo-desktop kernel: [ 33.787137] PCI: PCI BIOS revision 3.00 entry at 0xf1ff0, last bus=4Jul 22 21:50:17 paolo-desktop kernel: [ 33.787139] PCI: Using configuration type 1Jul 22 21:50:17 paolo-desktop kernel: [ 33.787146] Setting up standard PCI resourcesJul 22 21:50:17 paolo-desktop kernel: [ 33.792392] ACPI: EC: Look up EC in DSDTJul 22 21:50:17 paolo-desktop kernel: [ 33.799243] ACPI: Interpreter enabledJul 22 21:50:17 paolo-desktop kernel: [ 33.799246] ACPI: (supports S0 S1 S3 S4 S5)Jul 22 21:50:17 paolo-desktop kernel: [ 33.799257] ACPI: Using IOAPIC for interrupt routingJul 22 21:50:17 paolo-desktop kernel: [ 33.809516] ACPI: PCI Root Bridge [PCI0] (0000:00)Jul 22 21:50:17 paolo-desktop kernel: [ 33.810469] PCI: Transparent bridge - 0000:00:10.0Jul 22 21:50:17 paolo-desktop kernel: [ 33.810486] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]Jul 22 21:50:17 paolo-desktop kernel: [ 33.810757] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]Jul 22 21:50:17 paolo-desktop kernel: [ 33.915193] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled.Jul 22 21:50:17 paolo-desktop kernel: [ 33.915386] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled.Jul 22 21:50:17 paolo-desktop kernel: [ 33.915581] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled.Jul 22 21:50:17 paolo-desktop kernel: [ 33.915772] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled.Jul 22 21:50:17 paolo-desktop kernel: [ 33.915963] ACPI: PCI Interrupt Link [LNK5] (IRQs *5 7 9 10 11 14 15)Jul 22 21:50:17 paolo-desktop kernel: [ 33.916152] ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled.Jul 22 21:50:17 paolo-desktop kernel: [ 33.916342] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled.Jul 22 21:50:17 paolo-desktop kernel: [ 33.916532] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.Jul 22 21:50:17 paolo-desktop kernel: [ 33.916723] ACPI: PCI Interrupt Link [LUBA] (IRQs *5 7 9 10 11 14 15)Jul 22 21:50:17 paolo-desktop kernel: [ 33.916912] ACPI: PCI Interrupt Link [LUBB] (IRQs 5 7 9 10 11 14 15) *0, disabled.Jul 22 21:50:17 paolo-desktop kernel: [ 33.917103] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 *11 14 15)Jul 22 21:50:17 paolo-desktop kernel: [ 33.917292] ACPI: PCI Interrupt Link [LACI] (IRQs 5 7 9 10 11 14 15) *0, disabled.Jul 22 21:50:17 paolo-desktop kernel: [ 33.917483] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 *11 14 15)Jul 22 21:50:17 paolo-desktop kernel: [ 33.917672] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.Jul 22 21:50:17 paolo-desktop kernel: [ 33.917862] ACPI: PCI Interrupt Link [LMCI] (IRQs 5 7 9 10 11 14 15) *0, disabled.Jul 22 21:50:17 paolo-desktop kernel: [ 33.918053] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 *10 11 14 15)Jul 22 21:50:17 paolo-desktop kernel: [ 33.918243] ACPI: PCI Interrupt Link [LUB2] (IRQs *5 7 9 10 11 14 15)Jul 22 21:50:17 paolo-desktop kernel: [ 33.918432] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.Jul 22 21:50:17 paolo-desktop kernel: [ 33.918623] ACPI: PCI Interrupt Link [LSID] (IRQs *5 7 9 10 11 14 15)Jul 22 21:50:17 paolo-desktop kernel: [ 33.918814] ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 10 *11 14 15)Jul 22 21:50:17 paolo-desktop kernel: [ 33.919033] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.Jul 22 21:50:17 paolo-desktop kernel: [ 33.919246] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.Jul 22 21:50:17 paolo-desktop kernel: [ 33.919460] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.Jul 22 21:50:17 paolo-desktop kernel: [ 33.919676] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.Jul 22 21:50:17 paolo-desktop kernel: [ 33.919889] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0Jul 22 21:50:17 paolo-desktop kernel: [ 33.920101] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled.Jul 22 21:50:17 paolo-desktop kernel: [ 33.920314] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled.Jul 22 21:50:17 paolo-desktop kernel: [ 33.920526] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.Jul 22 21:50:17 paolo-desktop kernel: [ 33.920740] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0Jul 22 21:50:17 paolo-desktop kernel: [ 33.920953] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.Jul 22 21:50:17 paolo-desktop kernel: [ 33.921167] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0Jul 22 21:50:17 paolo-desktop kernel: [ 33.921381] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled.Jul 22 21:50:17 paolo-desktop kernel: [ 33.921594] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.Jul 22 21:50:17 paolo-desktop kernel: [ 33.921809] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0Jul 22 21:50:17 paolo-desktop kernel: [ 33.922023] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.Jul 22 21:50:17 paolo-desktop kernel: [ 33.922237] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0Jul 22 21:50:17 paolo-desktop kernel: [ 33.922454] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0Jul 22 21:50:17 paolo-desktop kernel: [ 33.922672] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.Jul 22 21:50:17 paolo-desktop kernel: [ 33.922891] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.Jul 22 21:50:17 paolo-desktop kernel: [ 33.923110] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0Jul 22 21:50:17 paolo-desktop kernel: [ 33.923328] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0Jul 22 21:50:17 paolo-desktop kernel: [ 33.923461] Linux Plug and Play Support v0.97 (c) Adam BelayJul 22 21:50:17 paolo-desktop kernel: [ 33.923486] pnp: PnP ACPI initJul 22 21:50:17 paolo-desktop kernel: [ 33.923493] ACPI: bus type pnp registeredJul 22 21:50:17 paolo-desktop kernel: [ 33.929034] pnpacpi: exceeded the max number of mem resources: 12Jul 22 21:50:17 paolo-desktop kernel: [ 33.929138] pnp: PnP ACPI: found 14 devicesJul 22 21:50:17 paolo-desktop kernel: [ 33.929140] ACPI: ACPI bus type pnp unregisteredJul 22 21:50:17 paolo-desktop kernel: [ 33.929143] PnPBIOS: Disabled by ACPI PNPJul 22 21:50:17 paolo-desktop kernel: [ 33.929324] PCI: Using ACPI for IRQ routingJul 22 21:50:17 paolo-desktop kernel: [ 33.929328] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a reportJul 22 21:50:17 paolo-desktop kernel: [ 34.027465] NET: Registered protocol family 8Jul 22 21:50:17 paolo-desktop kernel: [ 34.027467] NET: Registered protocol family 20Jul 22 21:50:17 paolo-desktop kernel: [ 34.027526] AppArmor: AppArmor Filesystem EnabledJul 22 21:50:17 paolo-desktop kernel: [ 34.039476] system 00:01: ioport range 0x4000-0x407f has been reservedJul 22 21:50:17 paolo-desktop kernel: [ 34.039479] system 00:01: ioport range 0x4080-0x40ff has been reservedJul 22 21:50:17 paolo-desktop kernel: [ 34.039481] system 00:01: ioport range 0x4400-0x447f has been reservedJul 22 21:50:17 paolo-desktop kernel: [ 34.039483] system 00:01: ioport range 0x4480-0x44ff has been reservedJul 22 21:50:17 paolo-desktop kernel: [ 34.039486] system 00:01: ioport range 0x4800-0x487f has been reservedJul 22 21:50:17 paolo-desktop kernel: [ 34.039488] system 00:01: ioport range 0x4880-0x48ff has been reservedJul 22 21:50:17 paolo-desktop kernel: [ 34.039493] system 00:01: ioport range 0x2000-0x207f has been reservedJul 22 21:50:17 paolo-desktop kernel: [ 34.039495] system 00:01: ioport range 0x2080-0x20ff has been reservedJul 22 21:50:17 paolo-desktop kernel: [ 34.039498] system 00:01: iomem range 0x0-0x0 could not be reservedJul 22 21:50:17 paolo-desktop kernel: [ 34.039502] system 00:02: ioport range 0x4d0-0x4d1 has been reservedJul 22 21:50:17 paolo-desktop kernel: [ 34.039505] system 00:02: ioport range 0x800-0x87f has been reservedJul 22 21:50:17 paolo-desktop kernel: [ 34.039507] system 00:02: ioport range 0x290-0x297 has been reservedJul 22 21:50:17 paolo-desktop kernel: [ 34.039515] system 00:0c: iomem range 0xf0000000-0xf3ffffff could not be reservedJul 22 21:50:17 paolo-desktop kernel: [ 34.039520] system 00:0d: iomem range 0xf0000-0xf3fff could not be reservedJul 22 21:50:17 paolo-desktop kernel: [ 34.039522] system 00:0d: iomem range 0xf4000-0xf7fff could not be reservedJul 22 21:50:17 paolo-desktop kernel: [ 34.039525] system 00:0d: iomem range 0xf8000-0xfbfff could not be reservedJul 22 21:50:17 paolo-desktop kernel: [ 34.039527] system 00:0d: iomem range 0xfc000-0xfffff could not be reservedJul 22 21:50:17 paolo-desktop kernel: [ 34.039529] system 00:0d: iomem range 0x3fef0000-0x3fefffff could not be reservedJul 22 21:50:17 paolo-desktop kernel: [ 34.039532] system 00:0d: iomem range 0xffff0000-0xffffffff could not be reservedJul 22 21:50:17 paolo-desktop kernel: [ 34.039534] system 00:0d: iomem range 0x0-0x9ffff could not be reservedJul 22 21:50:17 paolo-desktop kernel: [ 34.039537] system 00:0d: iomem range 0x100000-0x3feeffff could not be reservedJul 22 21:50:17 paolo-desktop kernel: [ 34.039539] system 00:0d: iomem range 0x0-0x0 could not be reservedJul 22 21:50:17 paolo-desktop kernel: [ 34.039541] system 00:0d: iomem range 0xfec00000-0xfec00fff could not be reservedJul 22 21:50:17 paolo-desktop kernel: [ 34.039544] system 00:0d: iomem range 0xfee00000-0xfeefffff could not be reservedJul 22 21:50:17 paolo-desktop kernel: [ 34.039546] system 00:0d: iomem range 0xfefff000-0xfeffffff could not be reservedJul 22 21:50:17 paolo-desktop kernel: [ 34.069857] PCI: Bridge: 0000:00:02.0Jul 22 21:50:17 paolo-desktop kernel: [ 34.069859] IO window: a000-afffJul 22 21:50:17 paolo-desktop kernel: [ 34.069862] MEM window: fdd00000-fddfffffJul 22 21:50:17 paolo-desktop kernel: [ 34.069864] PREFETCH window: fda00000-fdafffffJul 22 21:50:17 paolo-desktop kernel: [ 34.069867] PCI: Bridge: 0000:00:03.0Jul 22 21:50:17 paolo-desktop kernel: [ 34.069868] IO window: 8000-8fffJul 22 21:50:17 paolo-desktop kernel: [ 34.069870] MEM window: fd900000-fd9fffffJul 22 21:50:17 paolo-desktop kernel: [ 34.069872] PREFETCH window: fde00000-fdefffffJul 22 21:50:17 paolo-desktop kernel: [ 34.069875] PCI: Bridge: 0000:00:04.0Jul 22 21:50:17 paolo-desktop kernel: [ 34.069876] IO window: b000-bfffJul 22 21:50:17 paolo-desktop kernel: [ 34.069878] MEM window: fa000000-fcffffffJul 22 21:50:17 paolo-desktop kernel: [ 34.069880] PREFETCH window: e0000000-efffffffJul 22 21:50:17 paolo-desktop kernel: [ 34.069882] PCI: Bridge: 0000:00:10.0Jul 22 21:50:17 paolo-desktop kernel: [ 34.069884] IO window: 9000-9fffJul 22 21:50:17 paolo-desktop kernel: [ 34.069887] MEM window: fdc00000-fdcfffffJul 22 21:50:17 paolo-desktop kernel: [ 34.069890] PREFETCH window: fdb00000-fdbfffffJul 22 21:50:17 paolo-desktop kernel: [ 34.069902] PCI: Setting latency timer of device 0000:00:02.0 to 64Jul 22 21:50:17 paolo-desktop kernel: [ 34.069908] PCI: Setting latency timer of device 0000:00:03.0 to 64Jul 22 21:50:17 paolo-desktop kernel: [ 34.069913] PCI: Setting latency timer of device 0000:00:04.0 to 64Jul 22 21:50:17 paolo-desktop kernel: [ 34.069920] PCI: Setting latency timer of device 0000:00:10.0 to 64Jul 22 21:50:17 paolo-desktop kernel: [ 34.069931] NET: Registered protocol family 2Jul 22 21:50:17 paolo-desktop kernel: [ 34.071416] Time: acpi_pm clocksource has been installed.Jul 22 21:50:17 paolo-desktop kernel: [ 34.071434] Switched to high resolution mode on CPU 0Jul 22 21:50:17 paolo-desktop kernel: [ 34.072046] Switched to high resolution mode on CPU 1Jul 22 21:50:17 paolo-desktop kernel: [ 34.107409] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)Jul 22 21:50:17 paolo-desktop kernel: [ 34.107665] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)Jul 22 21:50:17 paolo-desktop kernel: [ 34.108480] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)Jul 22 21:50:17 paolo-desktop kernel: [ 34.108909] TCP: Hash tables configured (established 131072 bind 65536)Jul 22 21:50:17 paolo-desktop kernel: [ 34.108912] TCP reno registeredJul 22 21:50:17 paolo-desktop kernel: [ 34.119465] checking if image is initramfs... it isJul 22 21:50:17 paolo-desktop kernel: [ 34.682943] Freeing initrd memory: 7725k freedJul 22 21:50:17 paolo-desktop kernel: [ 34.684233] audit: initializing netlink socket (disabled)Jul 22 21:50:17 paolo-desktop kernel: [ 34.684246] audit(1216756197.448:1): initializedJul 22 21:50:17 paolo-desktop kernel: [ 34.684399] highmem bounce pool size: 64 pagesJul 22 21:50:17 paolo-desktop kernel: [ 34.686065] VFS: Disk quotas dquot_6.5.1Jul 22 21:50:17 paolo-desktop kernel: [ 34.686127] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)Jul 22 21:50:17 paolo-desktop kernel: [ 34.686230] io scheduler noop registeredJul 22 21:50:17 paolo-desktop kernel: [ 34.686232] io scheduler anticipatory registeredJul 22 21:50:17 paolo-desktop kernel: [ 34.686233] io scheduler deadline registeredJul 22 21:50:17 paolo-desktop kernel: [ 34.686242] io scheduler cfq registered (default)Jul 22 21:50:17 paolo-desktop kernel: [ 34.686252] pci 0000:00:00.0: Enabling HT MSI MappingJul 22 21:50:17 paolo-desktop kernel: [ 34.686279] pci 0000:00:02.0: Enabling HT MSI MappingJul 22 21:50:17 paolo-desktop kernel: [ 34.686286] pci 0000:00:03.0: Enabling HT MSI MappingJul 22 21:50:17 paolo-desktop kernel: [ 34.686294] pci 0000:00:04.0: Enabling HT MSI MappingJul 22 21:50:17 paolo-desktop kernel: [ 34.686315] pci 0000:00:09.0: Enabling HT MSI MappingJul 22 21:50:17 paolo-desktop kernel: [ 34.700277] pci 0000:00:0e.0: Enabling HT MSI MappingJul 22 21:50:17 paolo-desktop kernel: [ 34.700287] pci 0000:00:0f.0: Enabling HT MSI MappingJul 22 21:50:17 paolo-desktop kernel: [ 34.700295] pci 0000:00:10.0: Enabling HT MSI MappingJul 22 21:50:17 paolo-desktop kernel: [ 34.700305] pci 0000:00:10.1: Enabling HT MSI MappingJul 22 21:50:17 paolo-desktop kernel: [ 34.700321] Boot video device is 0000:03:00.0Jul 22 21:50:17 paolo-desktop kernel: [ 34.700415] PCI: Setting latency timer of device 0000:00:02.0 to 64Jul 22 21:50:17 paolo-desktop kernel: [ 34.700434] assign_interrupt_mode Found MSI capabilityJul 22 21:50:17 paolo-desktop kernel: [ 34.700451] Allocate Port Service[0000:00:02.0:pcie00]Jul 22 21:50:17 paolo-desktop kernel: [ 34.700511] PCI: Setting latency timer of device 0000:00:03.0 to 64Jul 22 21:50:17 paolo-desktop kernel: [ 34.700529] assign_interrupt_mode Found MSI capabilityJul 22 21:50:17 paolo-desktop kernel: [ 34.700542] Allocate Port Service[0000:00:03.0:pcie00]Jul 22 21:50:17 paolo-desktop kernel: [ 34.700596] PCI: Setting latency timer of device 0000:00:04.0 to 64Jul 22 21:50:17 paolo-desktop kernel: [ 34.700614] assign_interrupt_mode Found MSI capabilityJul 22 21:50:17 paolo-desktop kernel: [ 34.700627] Allocate Port Service[0000:00:04.0:pcie00]Jul 22 21:50:17 paolo-desktop kernel: [ 34.700831] isapnp: Scanning for PnP cards...Jul 22 21:50:17 paolo-desktop kernel: [ 35.053333] isapnp: No Plug & Play device foundJul 22 21:50:17 paolo-desktop kernel: [ 35.077987] Real Time Clock Driver v1.12acJul 22 21:50:17 paolo-desktop kernel: [ 35.078110] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabledJul 22 21:50:17 paolo-desktop kernel: [ 35.078233] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550AJul 22 21:50:17 paolo-desktop kernel: [ 35.078767] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550AJul 22 21:50:17 paolo-desktop kernel: [ 35.079487] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksizeJul 22 21:50:17 paolo-desktop kernel: [ 35.079544] input: Macintosh mouse button emulation as /devices/virtual/input/input0Jul 22 21:50:17 paolo-desktop kernel: [ 35.079628] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12Jul 22 21:50:17 paolo-desktop kernel: [ 35.079968] serio: i8042 KBD port at 0x60,0x64 irq 1Jul 22 21:50:17 paolo-desktop kernel: [ 35.079973] serio: i8042 AUX port at 0x60,0x64 irq 12Jul 22 21:50:17 paolo-desktop kernel: [ 35.099878] mice: PS/2 mouse device common for all miceJul 22 21:50:17 paolo-desktop kernel: [ 35.099994] EISA: Probing bus 0 at eisa.0Jul 22 21:50:17 paolo-desktop kernel: [ 35.100002] Cannot allocate resource for EISA slot 2Jul 22 21:50:17 paolo-desktop kernel: [ 35.100007] Cannot allocate resource for EISA slot 4Jul 22 21:50:17 paolo-desktop kernel: [ 35.100016] Cannot allocate resource for EISA slot 8Jul 22 21:50:17 paolo-desktop kernel: [ 35.100018] EISA: Detected 0 cards.Jul 22 21:50:17 paolo-desktop kernel: [ 35.100021] cpuidle: using governor ladderJul 22 21:50:17 paolo-desktop kernel: [ 35.100023] cpuidle: using governor menuJul 22 21:50:17 paolo-desktop kernel: [ 35.100100] NET: Registered protocol family 1Jul 22 21:50:17 paolo-desktop kernel: [ 35.100125] Using IPI No-Shortcut modeJul 22 21:50:17 paolo-desktop kernel: [ 35.100156] registered taskstats version 1Jul 22 21:50:17 paolo-desktop kernel: [ 35.100266] Magic number: 0:463:850Jul 22 21:50:17 paolo-desktop kernel: [ 35.100354] hash matches device ptyv2Jul 22 21:50:17 paolo-desktop kernel: [ 35.100428] BIOS EDD facility v0.16 2004-Jun-25, 0 devices foundJul 22 21:50:17 paolo-desktop kernel: [ 35.100429] EDD information not available.Jul 22 21:50:17 paolo-desktop kernel: [ 35.100669] Freeing unused kernel memory: 368k freedJul 22 21:50:17 paolo-desktop kernel: [ 35.119800] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1Jul 22 21:50:17 paolo-desktop kernel: [ 36.325507] fuse init (API version 7.9)Jul 22 21:50:17 paolo-desktop kernel: [ 36.340882] ACPI: Fan [FAN] (on)Jul 22 21:50:17 paolo-desktop kernel: [ 36.346542] ACPI: Thermal Zone [THRM] (40 C)Jul 22 21:50:17 paolo-desktop kernel: [ 36.878136] SCSI subsystem initializedJul 22 21:50:17 paolo-desktop kernel: [ 36.888048] usbcore: registered new interface driver usbfsJul 22 21:50:17 paolo-desktop kernel: [ 36.888071] usbcore: registered new interface driver hubJul 22 21:50:17 paolo-desktop kernel: [ 36.888153] usbcore: registered new device driver usbJul 22 21:50:17 paolo-desktop kernel: [ 36.889657] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 23Jul 22 21:50:17 paolo-desktop kernel: [ 36.889669] ACPI: PCI Interrupt 0000:00:0b.1[B] -> Link [APCL] -> GSI 23 (level, low) -> IRQ 16Jul 22 21:50:17 paolo-desktop kernel: [ 36.889680] PCI: Setting latency timer of device 0000:00:0b.1 to 64Jul 22 21:50:17 paolo-desktop kernel: [ 36.889682] ehci_hcd 0000:00:0b.1: EHCI Host ControllerJul 22 21:50:17 paolo-desktop kernel: [ 36.889967] ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 1Jul 22 21:50:17 paolo-desktop kernel: [ 36.889998] ehci_hcd 0000:00:0b.1: debug port 1Jul 22 21:50:17 paolo-desktop kernel: [ 36.890001] PCI: cache line size of 64 is not supported by device 0000:00:0b.1Jul 22 21:50:17 paolo-desktop kernel: [ 36.890012] ehci_hcd 0000:00:0b.1: irq 16, io mem 0xfe02e000Jul 22 21:50:17 paolo-desktop kernel: [ 36.890902] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) DriverJul 22 21:50:17 paolo-desktop kernel: [ 36.890924] libata version 3.00 loaded.Jul 22 21:50:17 paolo-desktop kernel: [ 36.900337] ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004Jul 22 21:50:17 paolo-desktop kernel: [ 36.900456] usb usb1: configuration #1 chosen from 1 choiceJul 22 21:50:17 paolo-desktop kernel: [ 36.900476] hub 1-0:1.0: USB hub foundJul 22 21:50:17 paolo-desktop kernel: [ 36.900482] hub 1-0:1.0: 8 ports detectedJul 22 21:50:17 paolo-desktop kernel: [ 36.982038] Floppy drive(s): fd0 is 1.44MJul 22 21:50:17 paolo-desktop kernel: [ 37.000068] FDC 0 is a post-1991 82077Jul 22 21:50:17 paolo-desktop kernel: [ 37.004770] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22Jul 22 21:50:17 paolo-desktop kernel: [ 37.004782] ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [APCF] -> GSI 22 (level, low) -> IRQ 17Jul 22 21:50:17 paolo-desktop kernel: [ 37.004794] PCI: Setting latency timer of device 0000:00:0b.0 to 64Jul 22 21:50:17 paolo-desktop kernel: [ 37.004797] ohci_hcd 0000:00:0b.0: OHCI Host ControllerJul 22 21:50:17 paolo-desktop kernel: [ 37.004822] ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2Jul 22 21:50:17 paolo-desktop kernel: [ 37.004838] ohci_hcd 0000:00:0b.0: irq 17, io mem 0xfe02f000Jul 22 21:50:17 paolo-desktop kernel: [ 37.062227] usb usb2: configuration #1 chosen from 1 choiceJul 22 21:50:17 paolo-desktop kernel: [ 37.062250] hub 2-0:1.0: USB hub foundJul 22 21:50:17 paolo-desktop kernel: [ 37.062258] hub 2-0:1.0: 8 ports detectedJul 22 21:50:17 paolo-desktop kernel: [ 37.164209] sata_nv 0000:00:0e.0: version 3.5Jul 22 21:50:17 paolo-desktop kernel: [ 37.164585] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 21Jul 22 21:50:17 paolo-desktop kernel: [ 37.164595] ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [APSI] -> GSI 21 (level, low) -> IRQ 18Jul 22 21:50:17 paolo-desktop kernel: [ 37.164636] PCI: Setting latency timer of device 0000:00:0e.0 to 64Jul 22 21:50:17 paolo-desktop kernel: [ 37.165520] scsi0 : sata_nvJul 22 21:50:17 paolo-desktop kernel: [ 37.167011] scsi1 : sata_nvJul 22 21:50:17 paolo-desktop kernel: [ 37.167192] ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xe000 irq 18Jul 22 21:50:17 paolo-desktop kernel: [ 37.167195] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xe008 irq 18Jul 22 21:50:17 paolo-desktop kernel: [ 37.475702] ata1: SATA link down (SStatus 0 SControl 300)Jul 22 21:50:17 paolo-desktop kernel: [ 37.547602] usb 2-4: new full speed USB device using ohci_hcd and address 2Jul 22 21:50:17 paolo-desktop kernel: [ 37.761053] usb 2-4: configuration #1 chosen from 1 choiceJul 22 21:50:17 paolo-desktop kernel: [ 37.799323] ata2: SATA link down (SStatus 0 SControl 300)Jul 22 21:50:17 paolo-desktop kernel: [ 37.810151] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 20Jul 22 21:50:17 paolo-desktop kernel: [ 37.810162] ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [APSJ] -> GSI 20 (level, low) -> IRQ 19Jul 22 21:50:17 paolo-desktop kernel: [ 37.810200] PCI: Setting latency timer of device 0000:00:0f.0 to 64Jul 22 21:50:17 paolo-desktop kernel: [ 37.810917] scsi2 : sata_nvJul 22 21:50:17 paolo-desktop kernel: [ 37.810966] scsi3 : sata_nvJul 22 21:50:17 paolo-desktop kernel: [ 37.811099] ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xcc00 irq 19Jul 22 21:50:17 paolo-desktop kernel: [ 37.811102] ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xcc08 irq 19Jul 22 21:50:17 paolo-desktop kernel: [ 38.118967] ata3: SATA link down (SStatus 0 SControl 300)Jul 22 21:50:17 paolo-desktop kernel: [ 38.438622] ata4: SATA link down (SStatus 0 SControl 300)Jul 22 21:50:17 paolo-desktop kernel: [ 38.450862] PCI: Setting latency timer of device 0000:00:0d.0 to 64Jul 22 21:50:17 paolo-desktop kernel: [ 38.451460] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.Jul 22 21:50:17 paolo-desktop kernel: [ 38.451837] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23Jul 22 21:50:17 paolo-desktop kernel: [ 38.451840] ACPI: PCI Interrupt 0000:00:14.0[A] -> Link [APCH] -> GSI 23 (level, low) -> IRQ 16Jul 22 21:50:17 paolo-desktop kernel: [ 38.451846] PCI: Setting latency timer of device 0000:00:14.0 to 64Jul 22 21:50:17 paolo-desktop kernel: [ 38.970985] forcedeth 0000:00:14.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:17:31:90:a4:d8Jul 22 21:50:17 paolo-desktop kernel: [ 38.970990] forcedeth 0000:00:14.0: highdma pwrctl timirq gbit lnktim desc-v3Jul 22 21:50:17 paolo-desktop kernel: [ 38.972977] pata_amd 0000:00:0d.0: version 0.3.10Jul 22 21:50:17 paolo-desktop kernel: [ 38.973024] PCI: Setting latency timer of device 0000:00:0d.0 to 64Jul 22 21:50:17 paolo-desktop kernel: [ 38.973398] scsi4 : pata_amdJul 22 21:50:17 paolo-desktop kernel: [ 38.973442] scsi5 : pata_amdJul 22 21:50:17 paolo-desktop kernel: [ 38.974044] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf400 irq 14Jul 22 21:50:17 paolo-desktop kernel: [ 38.974047] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf408 irq 15Jul 22 21:50:17 paolo-desktop kernel: [ 39.136221] ata5.00: ATA-7: Maxtor 6L080P0, BAJ41G20, max UDMA/133Jul 22 21:50:17 paolo-desktop kernel: [ 39.136226] ata5.00: 160086528 sectors, multi 1: LBA Jul 22 21:50:17 paolo-desktop kernel: [ 39.152133] ata5.00: configured for UDMA/133Jul 22 21:50:17 paolo-desktop kernel: [ 39.469777] ata6.00: ATAPI: HL-DT-ST DVDRAM GSA-H10N, JL10, max UDMA/33Jul 22 21:50:17 paolo-desktop kernel: [ 39.641520] ata6.00: configured for UDMA/33Jul 22 21:50:17 paolo-desktop kernel: [ 39.641612] scsi 4:0:0:0: Direct-Access ATA Maxtor 6L080P0 BAJ4 PQ: 0 ANSI: 5Jul 22 21:50:17 paolo-desktop kernel: [ 39.645980] scsi 5:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-H10N JL10 PQ: 0 ANSI: 5Jul 22 21:50:17 paolo-desktop kernel: [ 39.653486] Driver 'sd' needs updating - please use bus_type methodsJul 22 21:50:17 paolo-desktop kernel: [ 39.653569] sd 4:0:0:0: [sda] 160086528 512-byte hardware sectors (81964 MB)Jul 22 21:50:17 paolo-desktop kernel: [ 39.653580] sd 4:0:0:0: [sda] Write Protect is offJul 22 21:50:17 paolo-desktop kernel: [ 39.653582] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00Jul 22 21:50:17 paolo-desktop kernel: [ 39.653595] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUAJul 22 21:50:17 paolo-desktop kernel: [ 39.653634] sd 4:0:0:0: [sda] 160086528 512-byte hardware sectors (81964 MB)Jul 22 21:50:17 paolo-desktop kernel: [ 39.653641] sd 4:0:0:0: [sda] Write Protect is offJul 22 21:50:17 paolo-desktop kernel: [ 39.653643] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00Jul 22 21:50:17 paolo-desktop kernel: [ 39.653655] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUAJul 22 21:50:17 paolo-desktop kernel: [ 39.653658] sda:<4>Driver 'sr' needs updating - please use bus_type methodsJul 22 21:50:17 paolo-desktop kernel: [ 39.672745] sda1 sda2 < sda5 >Jul 22 21:50:17 paolo-desktop kernel: [ 39.690091] sd 4:0:0:0: [sda] Attached SCSI diskJul 22 21:50:17 paolo-desktop kernel: [ 39.693511] sd 4:0:0:0: Attached scsi generic sg0 type 0Jul 22 21:50:17 paolo-desktop kernel: [ 39.693528] sr 5:0:0:0: Attached scsi generic sg1 type 5Jul 22 21:50:17 paolo-desktop kernel: [ 39.709635] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda trayJul 22 21:50:17 paolo-desktop kernel: [ 39.709640] Uniform CD-ROM driver Revision: 3.20Jul 22 21:50:17 paolo-desktop kernel: [ 39.709689] sr 5:0:0:0: Attached scsi CD-ROM sr0Jul 22 21:50:17 paolo-desktop kernel: [ 39.880885] Attempting manual resumeJul 22 21:50:17 paolo-desktop kernel: [ 39.880889] swsusp: Resume From Partition 8:5Jul 22 21:50:17 paolo-desktop kernel: [ 39.880890] PM: Checking swsusp image.Jul 22 21:50:17 paolo-desktop kernel: [ 39.881039] PM: Resume from disk failed.Jul 22 21:50:17 paolo-desktop kernel: [ 39.900915] kjournald starting. Commit interval 5 secondsJul 22 21:50:17 paolo-desktop kernel: [ 39.901476] EXT3-fs: mounted filesystem with ordered data mode.Jul 22 21:50:17 paolo-desktop kernel: [ 47.061822] pci_hotplug: PCI Hot Plug PCI Core version: 0.5Jul 22 21:50:17 paolo-desktop kernel: [ 47.075771] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4Jul 22 21:50:17 paolo-desktop kernel: [ 47.244794] input: Power Button (FF) as /devices/virtual/input/input2Jul 22 21:50:17 paolo-desktop kernel: [ 47.266555] ACPI: Power Button (FF) [PWRF]Jul 22 21:50:17 paolo-desktop kernel: [ 47.266647] input: Power Button (CM) as /devices/virtual/input/input3Jul 22 21:50:17 paolo-desktop kernel: [ 47.271759] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x4c00Jul 22 21:50:17 paolo-desktop kernel: [ 47.271778] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x4c40Jul 22 21:50:17 paolo-desktop kernel: [ 47.298454] ACPI: Power Button (CM) [PWRB]Jul 22 21:50:17 paolo-desktop kernel: [ 47.570225] Linux agpgart interface v0.102Jul 22 21:50:17 paolo-desktop kernel: [ 48.625929] Linux video capture interface: v2.00Jul 22 21:50:17 paolo-desktop kernel: [ 48.709708] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: USB GSPCA camera found. (PAC207)Jul 22 21:50:17 paolo-desktop kernel: [ 48.720624] usbcore: registered new interface driver gspcaJul 22 21:50:17 paolo-desktop kernel: [ 48.720631] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: gspca driver 01.00.20 registeredJul 22 21:50:17 paolo-desktop kernel: [ 48.860600] input: PC Speaker as /devices/platform/pcspkr/input/input4Jul 22 21:50:17 paolo-desktop kernel: [ 49.310484] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 22Jul 22 21:50:17 paolo-desktop kernel: [ 49.310489] ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [AAZA] -> GSI 22 (level, low) -> IRQ 17Jul 22 21:50:17 paolo-desktop kernel: [ 49.310509] PCI: Setting latency timer of device 0000:00:10.1 to 64Jul 22 21:50:17 paolo-desktop kernel: [ 49.747151] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input5Jul 22 21:50:17 paolo-desktop kernel: [ 49.778047] parport_pc 00:09: reported by Plug and Play ACPIJul 22 21:50:17 paolo-desktop kernel: [ 49.778077] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]Jul 22 21:50:17 paolo-desktop kernel: [ 50.545581] lp0: using parport0 (interrupt-driven).Jul 22 21:50:17 paolo-desktop kernel: [ 50.602839] Adding 3020180k swap on /dev/sda5. Priority:-1 extents:1 across:3020180kJul 22 21:50:17 paolo-desktop kernel: [ 51.152962] EXT3 FS on sda1, internal journalJul 22 21:50:17 paolo-desktop kernel: [ 51.273229] device-mapper: uevent: version 1.0.3Jul 22 21:50:17 paolo-desktop kernel: [ 51.273258] device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.comJul 22 21:50:17 paolo-desktop kernel: [ 52.608205] ip_tables: (C) 2000-2006 Netfilter Core TeamJul 22 21:50:17 paolo-desktop kernel: [ 53.167523] No dock devices found.Jul 22 21:50:17 paolo-desktop kernel: [ 53.517668] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ processors (2 cpu cores) (version 2.20.00)Jul 22 21:50:17 paolo-desktop kernel: [ 53.517165] powernow-k8: MP systems not supported by PSB BIOS structureJul 22 21:50:17 paolo-desktop kernel: [ 53.517709] powernow-k8: MP systems not supported by PSB BIOS structureJul 22 21:50:22 paolo-desktop kernel: [ 58.487999] NET: Registered protocol family 10Jul 22 21:50:22 paolo-desktop kernel: [ 58.488212] lo: Disabled Privacy ExtensionsJul 22 21:50:26 paolo-desktop kernel: [ 63.219522] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)Jul 22 21:50:26 paolo-desktop kernel: [ 63.219527] apm: disabled - APM is not SMP safe.Jul 22 21:50:27 paolo-desktop kernel: [ 63.445784] ppdev: user-space parallel port driverJul 22 21:50:27 paolo-desktop kernel: [ 63.509636] audit(1216756227.088:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5379 profile="/usr/sbin/cupsd" namespace="default"Jul 22 21:50:37 paolo-desktop kernel: [ 73.429909] Bluetooth: Core ver 2.11Jul 22 21:50:37 paolo-desktop kernel: [ 73.430261] NET: Registered protocol family 31Jul 22 21:50:37 paolo-desktop kernel: [ 73.430263] Bluetooth: HCI device and connection manager initializedJul 22 21:50:37 paolo-desktop kernel: [ 73.430267] Bluetooth: HCI socket layer initializedJul 22 21:50:37 paolo-desktop kernel: [ 73.444163] Bluetooth: L2CAP ver 2.9Jul 22 21:50:37 paolo-desktop kernel: [ 73.444168] Bluetooth: L2CAP socket layer initializedJul 22 21:50:37 paolo-desktop kernel: [ 73.463056] Bluetooth: RFCOMM socket layer initializedJul 22 21:50:37 paolo-desktop kernel: [ 73.463272] Bluetooth: RFCOMM TTY layer initializedJul 22 21:50:37 paolo-desktop kernel: [ 73.463274] Bluetooth: RFCOMM ver 1.8Jul 22 21:50:41 paolo-desktop kernel: [ 77.464430] NET: Registered protocol family 17Jul 22 21:50:42 paolo-desktop kernel: [ 79.186133] lirc_dev: IR Remote Control driver registered, at major 61 Jul 22 21:50:42 paolo-desktop kernel: [ 79.275209] bttv: driver version 0.9.17 loadedJul 22 21:50:42 paolo-desktop kernel: [ 79.275215] bttv: using 8 buffers with 2080k (520 pages) each for captureJul 22 21:50:42 paolo-desktop kernel: [ 79.330374] ivtv: Start initialization, version 1.1.0Jul 22 21:50:42 paolo-desktop kernel: [ 79.330627] ivtv: End initializationJul 22 21:50:42 paolo-desktop kernel: [ 79.352887] cx88/0: cx2388x v4l2 driver version 0.0.6 loadedJul 22 21:50:53 paolo-desktop kernel: [ 91.236735] eth0: no IPv6 routers presentJul 22 21:56:08 paolo-desktop kernel: [ 406.304198] usb 2-3: new full speed USB device using ohci_hcd and address 3Jul 22 21:56:09 paolo-desktop kernel: [ 406.521309] usb 2-3: configuration #1 chosen from 1 choiceJul 22 21:56:09 paolo-desktop kernel: [ 406.587179] usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x04B8 pid 0x0005Jul 22 21:56:09 paolo-desktop kernel: [ 406.587196] usbcore: registered new interface driver usblpJul 22 21:57:16 paolo-desktop kernel: [ 473.719444] usb 2-3: USB disconnect, address 3Jul 22 21:57:16 paolo-desktop kernel: [ 473.720445] usblp0: nonzero write bulk status received: -108Jul 22 21:57:16 paolo-desktop kernel: [ 473.720862] usblp0: removedJul 22 23:13:15 paolo-desktop kernel: [ 5027.341696] eth0: link down.Jul 22 23:13:16 paolo-desktop kernel: [ 5028.952751] ip6_tables: (C) 2000-2006 Netfilter Core TeamJul 23 10:01:52 paolo-desktop kernel: Inspecting /boot/System.map-2.6.24-19-genericJul 23 10:01:52 paolo-desktop kernel: Loaded 27884 symbols from /boot/System.map-2.6.24-19-generic.Jul 23 10:01:52 paolo-desktop kernel: Symbols match kernel version 2.6.24.Jul 23 10:01:52 paolo-desktop kernel: Loaded 16714 symbols from 81 modules.Jul 23 10:01:52 paolo-desktop kernel: [ 0.000000] Initializing cgroup subsys cpusetJul 23 10:01:52 paolo-desktop kernel: [ 0.000000] Initializing cgroup subsys cpuJul 23 10:01:52 paolo-desktop kernel: [ 0.000000] Linux version 2.6.24-19-generic (buildd@terranova) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Fri Jul 11 23:41:49 UTC 2008 (Ubuntu 2.6.24-19.36-generic)Jul 23 10:01:52 paolo-desktop kernel: [ 0.000000] BIOS-provided physical RAM map:Jul 23 10:01:52 paolo-desktop kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)Jul 23 10:01:52 paolo-desktop kernel: [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)Jul 23 10:01:52 paolo-desktop kernel: [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)Jul 23 10:01:52 paolo-desktop kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 000000003fef0000 (usable)Jul 23 10:01:52 paolo-desktop kernel: [ 0.000000] BIOS-e820: 000000003fef0000 - 000000003fef3000 (ACPI NVS)Jul 23 10:01:52 paolo-desktop kernel: [ 0.000000] BIOS-e820: 000000003fef3000 - 000000003ff00000 (ACPI data)Jul 23 10:01:52 paolo-desktop kernel: [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)Jul 23 10:01:52 paolo-desktop kernel: [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)Jul 23 10:01:52 paolo-desktop kernel: [ 0.000000] 126MB HIGHMEM available.Jul 23 10:01:52 paolo-desktop kernel: [ 0.000000] 896MB LOWMEM available.Jul 23 10:01:52 paolo-desktop kernel: [ 0.000000] found SMP MP-table at 000f5790Jul 23 10:01:52 paolo-desktop kernel: [ 0.000000] Entering add_active_range(0, 0, 261872) 0 entries of 256 usedJul 23 10:01:52 paolo-desktop kernel: [ 0.000000] Zone PFN ranges:Jul 23 10:01:52 paolo-desktop kernel: [ 0.000000] DMA 0 -> 4096Jul 23 10:01:52 paolo-desktop kernel: [ 0.000000] Normal 4096 -> 229376Jul 23 10:01:52 paolo-desktop kernel: [ 0.000000] HighMem 229376 -> 261872Jul 23 10:01:52 paolo-desktop kernel: [ 0.000000] Movable zone start PFN for each nodeJul 23 10:01:52 paolo-desktop kernel: [ 0.000000] early_node_map[1] active PFN rangesJul 23 10:01:52 paolo-desktop kernel: [ 0.000000] 0: 0 -> 261872Jul 23 10:01:52 paolo-desktop kernel: [ 0.000000] On node 0 totalpages: 261872Jul 23 10:01:52 paolo-desktop kernel: [ 0.000000] DMA zone: 32 pages used for memmapJul 23 10:01:52 paolo-desktop kernel: [ 0.000000] DMA zone: 0 pages reservedJul 23 10:01:52 paolo-desktop kernel: [ 0.000000] DMA zone: 4064 pages, LIFO batch:0Jul 23 10:01:52 paolo-desktop kernel: [ 0.000000] Normal zone: 1760 pages used for memmapJul 23 10:01:52 paolo-desktop kernel: [ 0.000000] Normal zone: 223520 pages, LIFO batch:31Jul 23 10:01:52 paolo-desktop kernel: [ 0.000000] HighMem zone: 253 pages used for memmapJul 23 10:01:52 paolo-desktop kernel: [ 0.000000] HighMem zone: 32243 pages, LIFO batch:7Jul 23 10:01:52 paolo-desktop kernel: [ 0.000000] Movable zone: 0 pages used for memmapJul 23 10:01:52 paolo-desktop kernel: [ 0.000000] DMI 2.3 present.Jul 23 10:01:52 paolo-desktop kernel: [ 0.000000] ACPI: RSDP signature @ 0xC00F7240 checksum 0Jul 23 10:01:52 paolo-desktop kernel: [ 0.000000] ACPI: RSDP 000F7240, 0014 (r0 Nvidia)Jul 23 10:01:52 paolo-desktop kernel: [ 0.000000] ACPI: RSDT 3FEF3040, 0030 (r1 Nvidia AWRDACPI 42302E31 AWRD 0)Jul 23 10:01:52 paolo-desktop kernel: [ 0.000000] ACPI: FACP 3FEF30C0, 0074 (r1 Nvidia AWRDACPI 42302E31 AWRD 0)Jul 23 10:01:52 paolo-desktop kernel: [ 0.000000] ACPI: DSDT 3FEF3180, 7CAE (r1 NVIDIA AWRDACPI 1000 MSFT 100000E)Jul 23 10:01:52 paolo-desktop kernel: [ 0.000000] ACPI: FACS 3FEF0000, 0040Jul 23 10:01:52 paolo-desktop kernel: [ 0.000000] ACPI: MCFG 3FEFAF40, 003C (r1 Nvidia AWRDACPI 42302E31 AWRD 0)Jul 23 10:01:52 paolo-desktop kernel: [ 0.000000] ACPI: APIC 3FEFAE80, 007C (r1 Nvidia AWRDACPI 42302E31 AWRD 0)Jul 23 10:01:52 paolo-desktop kernel: [ 0.000000] Nvidia board detected. Ignoring ACPI timer override.Jul 23 10:01:52 paolo-desktop kernel: [ 0.000000] If you got timer trouble try acpi_use_timer_overrideJul 23 10:01:52 paolo-desktop kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x4008Jul 23 10:01:52 paolo-desktop kernel: [ 0.000000] ACPI: Local APIC address 0xfee00000Jul 23 10:01:52 paolo-desktop kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)Jul 23 10:01:52 paolo-desktop kernel: [ 0.000000] Processor #0 15:11 APIC version 16Jul 23 10:01:52 paolo-desktop kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)Jul 23 10:01:52 paolo-desktop kernel: [ 0.000000] Processor #1 15:11 APIC version 16Jul 23 10:01:52 paolo-desktop kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])Jul 23 10:01:52 paolo-desktop kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])Jul 23 10:01:52 paolo-desktop kernel: [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])Jul 23 10:01:52 paolo-desktop kernel: [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23Jul 23 10:01:52 paolo-desktop kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)Jul 23 10:01:52 paolo-desktop kernel: [ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored.Jul 23 10:01:52 paolo-desktop kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)Jul 23 10:01:52 paolo-desktop kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)Jul 23 10:01:52 paolo-desktop kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)Jul 23 10:01:52 paolo-desktop kernel: [ 0.000000] ACPI: IRQ9 used by override.Jul 23 10:01:52 paolo-desktop kernel: [ 0.000000] ACPI: IRQ14 used by override.Jul 23 10:01:52 paolo-desktop kernel: [ 0.000000] ACPI: IRQ15 used by override.Jul 23 10:01:52 paolo-desktop kernel: [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICsJul 23 10:01:52 paolo-desktop kernel: [ 0.000000] Using ACPI (MADT) for SMP configuration informationJul 23 10:01:52 paolo-desktop kernel: [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 3ff00000:b0100000)Jul 23 10:01:52 paolo-desktop kernel: [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000Jul 23 10:01:52 paolo-desktop kernel: [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000Jul 23 10:01:52 paolo-desktop kernel: [ 0.000000] swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000Jul 23 10:01:52 paolo-desktop kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259827Jul 23 10:01:52 paolo-desktop kernel: [ 0.000000] Kernel command line: root=UUID=50de9f9b-1da6-43e0-9750-d75c6ac2d2de ro quiet splashJul 23 10:01:52 paolo-desktop kernel: [ 0.000000] mapped APIC to ffffb000 (fee00000)Jul 23 10:01:52 paolo-desktop kernel: [ 0.000000] mapped IOAPIC to ffffa000 (fec00000)Jul 23 10:01:52 paolo-desktop kernel: [ 0.000000] Enabling fast FPU save and restore... done.Jul 23 10:01:52 paolo-desktop kernel: [ 0.000000] Enabling unmasked SIMD FPU exception support... done.Jul 23 10:01:52 paolo-desktop kernel: [ 0.000000] Initializing CPU#0Jul 23 10:01:52 paolo-desktop kernel: [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)Jul 23 10:01:52 paolo-desktop kernel: [ 0.000000] Detected 2204.689 MHz processor.Jul 23 10:01:52 paolo-desktop kernel: [ 28.176969] spurious 8259A interrupt: IRQ7.Jul 23 10:01:52 paolo-desktop kernel: [ 28.179121] Console: colour VGA+ 80x25Jul 23 10:01:52 paolo-desktop kernel: [ 28.179124] console [tty0] enabledJul 23 10:01:52 paolo-desktop kernel: [ 28.179485] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)Jul 23 10:01:52 paolo-desktop kernel: [ 28.179862] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)Jul 23 10:01:52 paolo-desktop kernel: [ 28.201468] Memory: 1025968k/1047488k available (2177k kernel code, 20896k reserved, 1006k data, 368k init, 129984k highmem)Jul 23 10:01:52 paolo-desktop kernel: [ 28.201476] virtual kernel memory layout:Jul 23 10:01:52 paolo-desktop kernel: [ 28.201477] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB)Jul 23 10:01:52 paolo-desktop kernel: [ 28.201478] pkmap : 0xff800000 - 0xffc00000 (4096 kB)Jul 23 10:01:52 paolo-desktop kernel: [ 28.201479] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)Jul 23 10:01:52 paolo-desktop kernel: [ 28.201480] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)Jul 23 10:01:52 paolo-desktop kernel: [ 28.201481] .init : 0xc0421000 - 0xc047d000 ( 368 kB)Jul 23 10:01:52 paolo-desktop kernel: [ 28.201482] .data : 0xc0320474 - 0xc041bdc4 (1006 kB)Jul 23 10:01:52 paolo-desktop kernel: [ 28.201483] .text : 0xc0100000 - 0xc0320474 (2177 kB)Jul 23 10:01:52 paolo-desktop kernel: [ 28.201485] Checking if this processor honours the WP bit even in supervisor mode... Ok.Jul 23 10:01:52 paolo-desktop kernel: [ 28.201520] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1Jul 23 10:01:52 paolo-desktop kernel: [ 28.281464] Calibrating delay using timer specific routine.. 4413.20 BogoMIPS (lpj=8826405)Jul 23 10:01:52 paolo-desktop kernel: [ 28.281490] Security Framework initializedJul 23 10:01:52 paolo-desktop kernel: [ 28.281496] SELinux: Disabled at boot.Jul 23 10:01:52 paolo-desktop kernel: [ 28.281510] AppArmor: AppArmor initializedJul 23 10:01:52 paolo-desktop kernel: [ 28.281513] Failure registering capabilities with primary security module.Jul 23 10:01:52 paolo-desktop kernel: [ 28.281521] Mount-cache hash table entries: 512Jul 23 10:01:52 paolo-desktop kernel: [ 28.281630] Initializing cgroup subsys nsJul 23 10:01:52 paolo-desktop kernel: [ 28.281634] Initializing cgroup subsys cpuacctJul 23 10:01:52 paolo-desktop kernel: [ 28.281643] CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000001f 00000000Jul 23 10:01:52 paolo-desktop kernel: [ 28.281651] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)Jul 23 10:01:52 paolo-desktop kernel: [ 28.281653] CPU: L2 Cache: 512K (64 bytes/line)Jul 23 10:01:52 paolo-desktop kernel: [ 28.281655] CPU 0(2) -> Core 0Jul 23 10:01:52 paolo-desktop kernel: [ 28.281657] CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000001f 00000000Jul 23 10:01:52 paolo-desktop kernel: [ 28.281666] Compat vDSO mapped to ffffe000.Jul 23 10:01:52 paolo-desktop kernel: [ 28.281676] Checking 'hlt' instruction... OK.Jul 23 10:01:52 paolo-desktop kernel: [ 28.297725] SMP alternatives: switching to UP codeJul 23 10:01:52 paolo-desktop kernel: [ 28.298861] Early unpacking initramfs... doneJul 23 10:01:52 paolo-desktop kernel: [ 28.589950] ACPI: Core revision 20070126Jul 23 10:01:52 paolo-desktop kernel: [ 28.590015] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.Jul 23 10:01:52 paolo-desktop kernel: [ 28.594778] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ stepping 02Jul 23 10:01:52 paolo-desktop kernel: [ 28.594794] SMP alternatives: switching to SMP codeJul 23 10:01:52 paolo-desktop kernel: [ 28.595209] Booting processor 1/1 eip 3000Jul 23 10:01:52 paolo-desktop kernel: [ 28.605697] Initializing CPU#1Jul 23 10:01:52 paolo-desktop kernel: [ 28.685573] Calibrating delay using timer specific routine.. 4409.53 BogoMIPS (lpj=8819071)Jul 23 10:01:52 paolo-desktop kernel: [ 28.685579] CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000001f 00000000Jul 23 10:01:52 paolo-desktop kernel: [ 28.685584] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)Jul 23 10:01:52 paolo-desktop kernel: [ 28.685586] CPU: L2 Cache: 512K (64 bytes/line)Jul 23 10:01:52 paolo-desktop kernel: [ 28.685588] CPU 1(2) -> Core 1Jul 23 10:01:52 paolo-desktop kernel: [ 28.685590] CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000001f 00000000Jul 23 10:01:52 paolo-desktop kernel: [ 28.685217] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ stepping 02Jul 23 10:01:52 paolo-desktop kernel: [ 28.685231] Total of 2 processors activated (8822.73 BogoMIPS).Jul 23 10:01:52 paolo-desktop kernel: [ 28.685526] ENABLING IO-APIC IRQsJul 23 10:01:52 paolo-desktop kernel: [ 28.685760] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1Jul 23 10:01:52 paolo-desktop kernel: [ 28.725460] ..MP-BIOS bug: 8254 timer not connected to IO-APICJul 23 10:01:52 paolo-desktop kernel: [ 28.725510] ...trying to set up timer (IRQ0) through the 8259A ... failed.Jul 23 10:01:52 paolo-desktop kernel: [ 28.725513] ...trying to set up timer as Virtual Wire IRQ... failed.Jul 23 10:01:52 paolo-desktop kernel: [ 28.765193] ...trying to set up timer as ExtINT IRQ... works.Jul 23 10:01:52 paolo-desktop kernel: [ 29.008866] Brought up 2 CPUsJul 23 10:01:52 paolo-desktop kernel: [ 29.008921] CPU0 attaching sched-domain:Jul 23 10:01:52 paolo-desktop kernel: [ 29.008923] domain 0: span 03Jul 23 10:01:52 paolo-desktop kernel: [ 29.008925] groups: 01 02Jul 23 10:01:52 paolo-desktop kernel: [ 29.008927] CPU1 attaching sched-domain:Jul 23 10:01:52 paolo-desktop kernel: [ 29.008929] domain 0: span 03Jul 23 10:01:52 paolo-desktop kernel: [ 29.008930] groups: 02 01Jul 23 10:01:52 paolo-desktop kernel: [ 29.009110] net_namespace: 64 bytesJul 23 10:01:52 paolo-desktop kernel: [ 29.009117] Booting paravirtualized kernel on bare hardwareJul 23 10:01:52 paolo-desktop kernel: [ 29.009511] Time: 8:01:30 Date: 07/23/08Jul 23 10:01:52 paolo-desktop kernel: [ 29.009536] NET: Registered protocol family 16Jul 23 10:01:52 paolo-desktop kernel: [ 29.009690] EISA bus registeredJul 23 10:01:52 paolo-desktop kernel: [ 29.009694] ACPI: bus type pci registeredJul 23 10:01:52 paolo-desktop kernel: [ 29.016136] PCI: PCI BIOS revision 3.00 entry at 0xf1ff0, last bus=4Jul 23 10:01:52 paolo-desktop kernel: [ 29.016138] PCI: Using configuration type 1Jul 23 10:01:52 paolo-desktop kernel: [ 29.016146] Setting up standard PCI resourcesJul 23 10:01:52 paolo-desktop kernel: [ 29.021391] ACPI: EC: Look up EC in DSDTJul 23 10:01:52 paolo-desktop kernel: [ 29.028242] ACPI: Interpreter enabledJul 23 10:01:52 paolo-desktop kernel: [ 29.028245] ACPI: (supports S0 S1 S3 S4 S5)Jul 23 10:01:52 paolo-desktop kernel: [ 29.028256] ACPI: Using IOAPIC for interrupt routingJul 23 10:01:52 paolo-desktop kernel: [ 29.038518] ACPI: PCI Root Bridge [PCI0] (0000:00)Jul 23 10:01:52 paolo-desktop kernel: [ 29.039467] PCI: Transparent bridge - 0000:00:10.0Jul 23 10:01:52 paolo-desktop kernel: [ 29.039484] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]Jul 23 10:01:52 paolo-desktop kernel: [ 29.039755] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]Jul 23 10:01:52 paolo-desktop kernel: [ 29.144259] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled.Jul 23 10:01:52 paolo-desktop kernel: [ 29.144452] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled.Jul 23 10:01:52 paolo-desktop kernel: [ 29.144647] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled.Jul 23 10:01:52 paolo-desktop kernel: [ 29.144837] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled.Jul 23 10:01:52 paolo-desktop kernel: [ 29.145029] ACPI: PCI Interrupt Link [LNK5] (IRQs *5 7 9 10 11 14 15)Jul 23 10:01:52 paolo-desktop kernel: [ 29.145218] ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled.Jul 23 10:01:52 paolo-desktop kernel: [ 29.145408] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled.Jul 23 10:01:52 paolo-desktop kernel: [ 29.145598] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.Jul 23 10:01:52 paolo-desktop kernel: [ 29.145789] ACPI: PCI Interrupt Link [LUBA] (IRQs *5 7 9 10 11 14 15)Jul 23 10:01:52 paolo-desktop kernel: [ 29.145978] ACPI: PCI Interrupt Link [LUBB] (IRQs 5 7 9 10 11 14 15) *0, disabled.Jul 23 10:01:52 paolo-desktop kernel: [ 29.146169] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 *11 14 15)Jul 23 10:01:52 paolo-desktop kernel: [ 29.146358] ACPI: PCI Interrupt Link [LACI] (IRQs 5 7 9 10 11 14 15) *0, disabled.Jul 23 10:01:52 paolo-desktop kernel: [ 29.146548] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 *11 14 15)Jul 23 10:01:52 paolo-desktop kernel: [ 29.146738] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.Jul 23 10:01:52 paolo-desktop kernel: [ 29.146927] ACPI: PCI Interrupt Link [LMCI] (IRQs 5 7 9 10 11 14 15) *0, disabled.Jul 23 10:01:52 paolo-desktop kernel: [ 29.147118] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 *10 11 14 15)Jul 23 10:01:52 paolo-desktop kernel: [ 29.147308] ACPI: PCI Interrupt Link [LUB2] (IRQs *5 7 9 10 11 14 15)Jul 23 10:01:52 paolo-desktop kernel: [ 29.147498] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.Jul 23 10:01:52 paolo-desktop kernel: [ 29.147689] ACPI: PCI Interrupt Link [LSID] (IRQs *5 7 9 10 11 14 15)Jul 23 10:01:52 paolo-desktop kernel: [ 29.147879] ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 10 *11 14 15)Jul 23 10:01:52 paolo-desktop kernel: [ 29.148098] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.Jul 23 10:01:52 paolo-desktop kernel: [ 29.148311] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.Jul 23 10:01:52 paolo-desktop kernel: [ 29.148525] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.Jul 23 10:01:52 paolo-desktop kernel: [ 29.148741] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.Jul 23 10:01:52 paolo-desktop kernel: [ 29.148954] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0Jul 23 10:01:52 paolo-desktop kernel: [ 29.149166] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled.Jul 23 10:01:52 paolo-desktop kernel: [ 29.149379] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled.Jul 23 10:01:52 paolo-desktop kernel: [ 29.149591] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.Jul 23 10:01:52 paolo-desktop kernel: [ 29.149805] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0Jul 23 10:01:52 paolo-desktop kernel: [ 29.150019] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.Jul 23 10:01:52 paolo-desktop kernel: [ 29.150232] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0Jul 23 10:01:52 paolo-desktop kernel: [ 29.150446] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled.Jul 23 10:01:52 paolo-desktop kernel: [ 29.150659] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.Jul 23 10:01:52 paolo-desktop kernel: [ 29.150874] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0Jul 23 10:01:52 paolo-desktop kernel: [ 29.151088] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.Jul 23 10:01:52 paolo-desktop kernel: [ 29.151302] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0Jul 23 10:01:52 paolo-desktop kernel: [ 29.151519] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0Jul 23 10:01:52 paolo-desktop kernel: [ 29.151737] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.Jul 23 10:01:52 paolo-desktop kernel: [ 29.151956] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.Jul 23 10:01:52 paolo-desktop kernel: [ 29.152175] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0Jul 23 10:01:52 paolo-desktop kernel: [ 29.152392] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0Jul 23 10:01:52 paolo-desktop kernel: [ 29.152526] Linux Plug and Play Support v0.97 (c) Adam BelayJul 23 10:01:52 paolo-desktop kernel: [ 29.152552] pnp: PnP ACPI initJul 23 10:01:52 paolo-desktop kernel: [ 29.152558] ACPI: bus type pnp registeredJul 23 10:01:52 paolo-desktop kernel: [ 29.158096] pnpacpi: exceeded the max number of mem resources: 12Jul 23 10:01:52 paolo-desktop kernel: [ 29.158201] pnp: PnP ACPI: found 14 devicesJul 23 10:01:52 paolo-desktop kernel: [ 29.158203] ACPI: ACPI bus type pnp unregisteredJul 23 10:01:52 paolo-desktop kernel: [ 29.158206] PnPBIOS: Disabled by ACPI PNPJul 23 10:01:52 paolo-desktop kernel: [ 29.158386] PCI: Using ACPI for IRQ routingJul 23 10:01:52 paolo-desktop kernel: [ 29.158391] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a reportJul 23 10:01:52 paolo-desktop kernel: [ 29.256528] NET: Registered protocol family 8Jul 23 10:01:52 paolo-desktop kernel: [ 29.256530] NET: Registered protocol family 20Jul 23 10:01:52 paolo-desktop kernel: [ 29.256589] AppArmor: AppArmor Filesystem EnabledJul 23 10:01:52 paolo-desktop kernel: [ 29.268540] system 00:01: ioport range 0x4000-0x407f has been reservedJul 23 10:01:52 paolo-desktop kernel: [ 29.268542] system 00:01: ioport range 0x4080-0x40ff has been reservedJul 23 10:01:52 paolo-desktop kernel: [ 29.268545] system 00:01: ioport range 0x4400-0x447f has been reservedJul 23 10:01:52 paolo-desktop kernel: [ 29.268547] system 00:01: ioport range 0x4480-0x44ff has been reservedJul 23 10:01:52 paolo-desktop kernel: [ 29.268549] system 00:01: ioport range 0x4800-0x487f has been reservedJul 23 10:01:52 paolo-desktop kernel: [ 29.268551] system 00:01: ioport range 0x4880-0x48ff has been reservedJul 23 10:01:52 paolo-desktop kernel: [ 29.268556] system 00:01: ioport range 0x2000-0x207f has been reservedJul 23 10:01:52 paolo-desktop kernel: [ 29.268559] system 00:01: ioport range 0x2080-0x20ff has been reservedJul 23 10:01:52 paolo-desktop kernel: [ 29.268561] system 00:01: iomem range 0x0-0x0 could not be reservedJul 23 10:01:52 paolo-desktop kernel: [ 29.268566] system 00:02: ioport range 0x4d0-0x4d1 has been reservedJul 23 10:01:52 paolo-desktop kernel: [ 29.268568] system 00:02: ioport range 0x800-0x87f has been reservedJul 23 10:01:52 paolo-desktop kernel: [ 29.268570] system 00:02: ioport range 0x290-0x297 has been reservedJul 23 10:01:52 paolo-desktop kernel: [ 29.268578] system 00:0c: iomem range 0xf0000000-0xf3ffffff could not be reservedJul 23 10:01:52 paolo-desktop kernel: [ 29.268583] system 00:0d: iomem range 0xf0000-0xf3fff could not be reservedJul 23 10:01:52 paolo-desktop kernel: [ 29.268585] system 00:0d: iomem range 0xf4000-0xf7fff could not be reservedJul 23 10:01:52 paolo-desktop kernel: [ 29.268588] system 00:0d: iomem range 0xf8000-0xfbfff could not be reservedJul 23 10:01:52 paolo-desktop kernel: [ 29.268590] system 00:0d: iomem range 0xfc000-0xfffff could not be reservedJul 23 10:01:52 paolo-desktop kernel: [ 29.268592] system 00:0d: iomem range 0x3fef0000-0x3fefffff could not be reservedJul 23 10:01:52 paolo-desktop kernel: [ 29.268595] system 00:0d: iomem range 0xffff0000-0xffffffff could not be reservedJul 23 10:01:52 paolo-desktop kernel: [ 29.268597] system 00:0d: iomem range 0x0-0x9ffff could not be reservedJul 23 10:01:52 paolo-desktop kernel: [ 29.268600] system 00:0d: iomem range 0x100000-0x3feeffff could not be reservedJul 23 10:01:52 paolo-desktop kernel: [ 29.268602] system 00:0d: iomem range 0x0-0x0 could not be reservedJul 23 10:01:52 paolo-desktop kernel: [ 29.268605] system 00:0d: iomem range 0xfec00000-0xfec00fff could not be reservedJul 23 10:01:52 paolo-desktop kernel: [ 29.268607] system 00:0d: iomem range 0xfee00000-0xfeefffff could not be reservedJul 23 10:01:52 paolo-desktop kernel: [ 29.268610] system 00:0d: iomem range 0xfefff000-0xfeffffff could not be reservedJul 23 10:01:52 paolo-desktop kernel: [ 29.298918] PCI: Bridge: 0000:00:02.0Jul 23 10:01:52 paolo-desktop kernel: [ 29.298920] IO window: a000-afffJul 23 10:01:52 paolo-desktop kernel: [ 29.298923] MEM window: fdd00000-fddfffffJul 23 10:01:52 paolo-desktop kernel: [ 29.298925] PREFETCH window: fda00000-fdafffffJul 23 10:01:52 paolo-desktop kernel: [ 29.298927] PCI: Bridge: 0000:00:03.0Jul 23 10:01:52 paolo-desktop kernel: [ 29.298929] IO window: 8000-8fffJul 23 10:01:52 paolo-desktop kernel: [ 29.298931] MEM window: fd900000-fd9fffffJul 23 10:01:52 paolo-desktop kernel: [ 29.298933] PREFETCH window: fde00000-fdefffffJul 23 10:01:52 paolo-desktop kernel: [ 29.298935] PCI: Bridge: 0000:00:04.0Jul 23 10:01:52 paolo-desktop kernel: [ 29.298937] IO window: b000-bfffJul 23 10:01:52 paolo-desktop kernel: [ 29.298939] MEM window: fa000000-fcffffffJul 23 10:01:52 paolo-desktop kernel: [ 29.298941] PREFETCH window: e0000000-efffffffJul 23 10:01:52 paolo-desktop kernel: [ 29.298943] PCI: Bridge: 0000:00:10.0Jul 23 10:01:52 paolo-desktop kernel: [ 29.298945] IO window: 9000-9fffJul 23 10:01:52 paolo-desktop kernel: [ 29.298948] MEM window: fdc00000-fdcfffffJul 23 10:01:52 paolo-desktop kernel: [ 29.298950] PREFETCH window: fdb00000-fdbfffffJul 23 10:01:52 paolo-desktop kernel: [ 29.298963] PCI: Setting latency timer of device 0000:00:02.0 to 64Jul 23 10:01:52 paolo-desktop kernel: [ 29.298969] PCI: Setting latency timer of device 0000:00:03.0 to 64Jul 23 10:01:52 paolo-desktop kernel: [ 29.298975] PCI: Setting latency timer of device 0000:00:04.0 to 64Jul 23 10:01:52 paolo-desktop kernel: [ 29.298981] PCI: Setting latency timer of device 0000:00:10.0 to 64Jul 23 10:01:52 paolo-desktop kernel: [ 29.298992] NET: Registered protocol family 2Jul 23 10:01:52 paolo-desktop kernel: [ 29.300479] Time: acpi_pm clocksource has been installed.Jul 23 10:01:52 paolo-desktop kernel: [ 29.300497] Switched to high resolution mode on CPU 0Jul 23 10:01:52 paolo-desktop kernel: [ 29.301108] Switched to high resolution mode on CPU 1Jul 23 10:01:52 paolo-desktop kernel: [ 29.336471] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)Jul 23 10:01:52 paolo-desktop kernel: [ 29.336727] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)Jul 23 10:01:52 paolo-desktop kernel: [ 29.337544] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)Jul 23 10:01:52 paolo-desktop kernel: [ 29.337973] TCP: Hash tables configured (established 131072 bind 65536)Jul 23 10:01:52 paolo-desktop kernel: [ 29.337976] TCP reno registeredJul 23 10:01:52 paolo-desktop kernel: [ 29.348527] checking if image is initramfs... it isJul 23 10:01:52 paolo-desktop kernel: [ 29.912019] Freeing initrd memory: 7725k freedJul 23 10:01:52 paolo-desktop kernel: [ 29.913306] audit: initializing netlink socket (disabled)Jul 23 10:01:52 paolo-desktop kernel: [ 29.913327] audit(1216800090.448:1): initializedJul 23 10:01:52 paolo-desktop kernel: [ 29.913471] highmem bounce pool size: 64 pagesJul 23 10:01:52 paolo-desktop kernel: [ 29.915135] VFS: Disk quotas dquot_6.5.1Jul 23 10:01:52 paolo-desktop kernel: [ 29.915197] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)Jul 23 10:01:52 paolo-desktop kernel: [ 29.915300] io scheduler noop registeredJul 23 10:01:52 paolo-desktop kernel: [ 29.915302] io scheduler anticipatory registeredJul 23 10:01:52 paolo-desktop kernel: [ 29.915304] io scheduler deadline registeredJul 23 10:01:52 paolo-desktop kernel: [ 29.915312] io scheduler cfq registered (default)Jul 23 10:01:52 paolo-desktop kernel: [ 29.915323] pci 0000:00:00.0: Enabling HT MSI MappingJul 23 10:01:52 paolo-desktop kernel: [ 29.915349] pci 0000:00:02.0: Enabling HT MSI MappingJul 23 10:01:52 paolo-desktop kernel: [ 29.915357] pci 0000:00:03.0: Enabling HT MSI MappingJul 23 10:01:52 paolo-desktop kernel: [ 29.915364] pci 0000:00:04.0: Enabling HT MSI MappingJul 23 10:01:52 paolo-desktop kernel: [ 29.915385] pci 0000:00:09.0: Enabling HT MSI MappingJul 23 10:01:52 paolo-desktop kernel: [ 29.929338] pci 0000:00:0e.0: Enabling HT MSI MappingJul 23 10:01:52 paolo-desktop kernel: [ 29.929348] pci 0000:00:0f.0: Enabling HT MSI MappingJul 23 10:01:52 paolo-desktop kernel: [ 29.929356] pci 0000:00:10.0: Enabling HT MSI MappingJul 23 10:01:52 paolo-desktop kernel: [ 29.929366] pci 0000:00:10.1: Enabling HT MSI MappingJul 23 10:01:52 paolo-desktop kernel: [ 29.929382] Boot video device is 0000:03:00.0Jul 23 10:01:52 paolo-desktop kernel: [ 29.929475] PCI: Setting latency timer of device 0000:00:02.0 to 64Jul 23 10:01:52 paolo-desktop kernel: [ 29.929495] assign_interrupt_mode Found MSI capabilityJul 23 10:01:52 paolo-desktop kernel: [ 29.929512] Allocate Port Service[0000:00:02.0:pcie00]Jul 23 10:01:52 paolo-desktop kernel: [ 29.929572] PCI: Setting latency timer of device 0000:00:03.0 to 64Jul 23 10:01:52 paolo-desktop kernel: [ 29.929590] assign_interrupt_mode Found MSI capabilityJul 23 10:01:52 paolo-desktop kernel: [ 29.929603] Allocate Port Service[0000:00:03.0:pcie00]Jul 23 10:01:52 paolo-desktop kernel: [ 29.929657] PCI: Setting latency timer of device 0000:00:04.0 to 64Jul 23 10:01:52 paolo-desktop kernel: [ 29.929675] assign_interrupt_mode Found MSI capabilityJul 23 10:01:52 paolo-desktop kernel: [ 29.929688] Allocate Port Service[0000:00:04.0:pcie00]Jul 23 10:01:52 paolo-desktop kernel: [ 29.929892] isapnp: Scanning for PnP cards...Jul 23 10:01:52 paolo-desktop kernel: [ 30.282395] isapnp: No Plug & Play device foundJul 23 10:01:52 paolo-desktop kernel: [ 30.307083] Real Time Clock Driver v1.12acJul 23 10:01:52 paolo-desktop kernel: [ 30.307205] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabledJul 23 10:01:52 paolo-desktop kernel: [ 30.307328] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550AJul 23 10:01:52 paolo-desktop kernel: [ 30.307866] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550AJul 23 10:01:52 paolo-desktop kernel: [ 30.308585] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksizeJul 23 10:01:52 paolo-desktop kernel: [ 30.308641] input: Macintosh mouse button emulation as /devices/virtual/input/input0Jul 23 10:01:52 paolo-desktop kernel: [ 30.308725] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12Jul 23 10:01:52 paolo-desktop kernel: [ 30.309075] serio: i8042 KBD port at 0x60,0x64 irq 1Jul 23 10:01:52 paolo-desktop kernel: [ 30.309080] serio: i8042 AUX port at 0x60,0x64 irq 12Jul 23 10:01:52 paolo-desktop kernel: [ 30.328940] mice: PS/2 mouse device common for all miceJul 23 10:01:52 paolo-desktop kernel: [ 30.329059] EISA: Probing bus 0 at eisa.0Jul 23 10:01:52 paolo-desktop kernel: [ 30.329067] Cannot allocate resource for EISA slot 2Jul 23 10:01:52 paolo-desktop kernel: [ 30.329071] Cannot allocate resource for EISA slot 4Jul 23 10:01:52 paolo-desktop kernel: [ 30.329081] Cannot allocate resource for EISA slot 8Jul 23 10:01:52 paolo-desktop kernel: [ 30.329083] EISA: Detected 0 cards.Jul 23 10:01:52 paolo-desktop kernel: [ 30.329086] cpuidle: using governor ladderJul 23 10:01:52 paolo-desktop kernel: [ 30.329088] cpuidle: using governor menuJul 23 10:01:52 paolo-desktop kernel: [ 30.329165] NET: Registered protocol family 1Jul 23 10:01:52 paolo-desktop kernel: [ 30.329189] Using IPI No-Shortcut modeJul 23 10:01:52 paolo-desktop kernel: [ 30.329220] registered taskstats version 1Jul 23 10:01:52 paolo-desktop kernel: [ 30.329329] Magic number: 0:542:18Jul 23 10:01:52 paolo-desktop kernel: [ 30.329337] hash matches device ttycfJul 23 10:01:52 paolo-desktop kernel: [ 30.329486] BIOS EDD facility v0.16 2004-Jun-25, 0 devices foundJul 23 10:01:52 paolo-desktop kernel: [ 30.329488] EDD information not available.Jul 23 10:01:52 paolo-desktop kernel: [ 30.329731] Freeing unused kernel memory: 368k freedJul 23 10:01:52 paolo-desktop kernel: [ 30.348861] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1Jul 23 10:01:52 paolo-desktop kernel: [ 31.554636] fuse init (API version 7.9)Jul 23 10:01:52 paolo-desktop kernel: [ 31.570140] ACPI: Fan [FAN] (on)Jul 23 10:01:52 paolo-desktop kernel: [ 31.576787] ACPI: Thermal Zone [THRM] (40 C)Jul 23 10:01:52 paolo-desktop kernel: [ 32.094541] usbcore: registered new interface driver usbfsJul 23 10:01:52 paolo-desktop kernel: [ 32.094562] usbcore: registered new interface driver hubJul 23 10:01:52 paolo-desktop kernel: [ 32.094591] usbcore: registered new device driver usbJul 23 10:01:52 paolo-desktop kernel: [ 32.094912] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) DriverJul 23 10:01:52 paolo-desktop kernel: [ 32.095325] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23Jul 23 10:01:52 paolo-desktop kernel: [ 32.095336] ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [APCF] -> GSI 23 (level, low) -> IRQ 16Jul 23 10:01:52 paolo-desktop kernel: [ 32.095347] PCI: Setting latency timer of device 0000:00:0b.0 to 64Jul 23 10:01:52 paolo-desktop kernel: [ 32.095350] ohci_hcd 0000:00:0b.0: OHCI Host ControllerJul 23 10:01:52 paolo-desktop kernel: [ 32.095620] ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 1Jul 23 10:01:52 paolo-desktop kernel: [ 32.095637] ohci_hcd 0000:00:0b.0: irq 16, io mem 0xfe02f000Jul 23 10:01:52 paolo-desktop kernel: [ 32.134727] SCSI subsystem initializedJul 23 10:01:52 paolo-desktop kernel: [ 32.141882] libata version 3.00 loaded.Jul 23 10:01:52 paolo-desktop kernel: [ 32.151464] usb usb1: configuration #1 chosen from 1 choiceJul 23 10:01:52 paolo-desktop kernel: [ 32.151487] hub 1-0:1.0: USB hub foundJul 23 10:01:52 paolo-desktop kernel: [ 32.151494] hub 1-0:1.0: 8 ports detectedJul 23 10:01:52 paolo-desktop kernel: [ 32.245113] Floppy drive(s): fd0 is 1.44MJul 23 10:01:52 paolo-desktop kernel: [ 32.254281] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22Jul 23 10:01:52 paolo-desktop kernel: [ 32.254293] ACPI: PCI Interrupt 0000:00:0b.1[B] -> Link [APCL] -> GSI 22 (level, low) -> IRQ 17Jul 23 10:01:52 paolo-desktop kernel: [ 32.254305] PCI: Setting latency timer of device 0000:00:0b.1 to 64Jul 23 10:01:52 paolo-desktop kernel: [ 32.254308] ehci_hcd 0000:00:0b.1: EHCI Host ControllerJul 23 10:01:52 paolo-desktop kernel: [ 32.254342] ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 2Jul 23 10:01:52 paolo-desktop kernel: [ 32.254368] ehci_hcd 0000:00:0b.1: debug port 1Jul 23 10:01:52 paolo-desktop kernel: [ 32.254372] PCI: cache line size of 64 is not supported by device 0000:00:0b.1Jul 23 10:01:52 paolo-desktop kernel: [ 32.254383] ehci_hcd 0000:00:0b.1: irq 17, io mem 0xfe02e000Jul 23 10:01:52 paolo-desktop kernel: [ 32.261109] FDC 0 is a post-1991 82077Jul 23 10:01:52 paolo-desktop kernel: [ 32.266744] ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004Jul 23 10:01:52 paolo-desktop kernel: [ 32.266834] usb usb2: configuration #1 chosen from 1 choiceJul 23 10:01:52 paolo-desktop kernel: [ 32.266853] hub 2-0:1.0: USB hub foundJul 23 10:01:52 paolo-desktop kernel: [ 32.266858] hub 2-0:1.0: 8 ports detectedJul 23 10:01:52 paolo-desktop kernel: [ 32.370318] PCI: Setting latency timer of device 0000:00:0d.0 to 64Jul 23 10:01:52 paolo-desktop kernel: [ 32.370699] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 21Jul 23 10:01:52 paolo-desktop kernel: [ 32.370709] ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [APSI] -> GSI 21 (level, low) -> IRQ 18Jul 23 10:01:52 paolo-desktop kernel: [ 32.370732] PCI: Setting latency timer of device 0000:00:0e.0 to 64Jul 23 10:01:52 paolo-desktop kernel: [ 32.370740] ACPI: PCI interrupt for device 0000:00:0e.0 disabledJul 23 10:01:52 paolo-desktop kernel: [ 32.371043] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 20Jul 23 10:01:52 paolo-desktop kernel: [ 32.371050] ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [APSJ] -> GSI 20 (level, low) -> IRQ 19Jul 23 10:01:52 paolo-desktop kernel: [ 32.371065] PCI: Setting latency timer of device 0000:00:0f.0 to 64Jul 23 10:01:52 paolo-desktop kernel: [ 32.371073] ACPI: PCI interrupt for device 0000:00:0f.0 disabledJul 23 10:01:52 paolo-desktop kernel: [ 32.373204] sata_nv 0000:00:0e.0: version 3.5Jul 23 10:01:52 paolo-desktop kernel: [ 32.373213] ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [APSI] -> GSI 21 (level, low) -> IRQ 18Jul 23 10:01:52 paolo-desktop kernel: [ 32.373246] PCI: Setting latency timer of device 0000:00:0e.0 to 64Jul 23 10:01:52 paolo-desktop kernel: [ 32.373367] scsi0 : sata_nvJul 23 10:01:52 paolo-desktop kernel: [ 32.373407] scsi1 : sata_nvJul 23 10:01:52 paolo-desktop kernel: [ 32.373560] ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xe000 irq 18Jul 23 10:01:52 paolo-desktop kernel: [ 32.373563] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xe008 irq 18Jul 23 10:01:52 paolo-desktop kernel: [ 32.684782] ata1: SATA link down (SStatus 0 SControl 300)Jul 23 10:01:52 paolo-desktop kernel: [ 32.956470] usb 1-4: new full speed USB device using ohci_hcd and address 2Jul 23 10:01:52 paolo-desktop kernel: [ 33.004415] ata2: SATA link down (SStatus 0 SControl 300)Jul 23 10:01:52 paolo-desktop kernel: [ 33.014876] ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [APSJ] -> GSI 20 (level, low) -> IRQ 19Jul 23 10:01:52 paolo-desktop kernel: [ 33.014917] PCI: Setting latency timer of device 0000:00:0f.0 to 64Jul 23 10:01:52 paolo-desktop kernel: [ 33.014971] scsi2 : sata_nvJul 23 10:01:52 paolo-desktop kernel: [ 33.015190] scsi3 : sata_nvJul 23 10:01:52 paolo-desktop kernel: [ 33.015357] ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xcc00 irq 19Jul 23 10:01:52 paolo-desktop kernel: [ 33.015360] ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xcc08 irq 19Jul 23 10:01:52 paolo-desktop kernel: [ 33.169936] usb 1-4: configuration #1 chosen from 1 choiceJul 23 10:01:52 paolo-desktop kernel: [ 33.324071] ata3: SATA link down (SStatus 0 SControl 300)Jul 23 10:01:52 paolo-desktop kernel: [ 33.643717] ata4: SATA link down (SStatus 0 SControl 300)Jul 23 10:01:52 paolo-desktop kernel: [ 33.656306] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.Jul 23 10:01:52 paolo-desktop kernel: [ 33.656676] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23Jul 23 10:01:52 paolo-desktop kernel: [ 33.656680] ACPI: PCI Interrupt 0000:00:14.0[A] -> Link [APCH] -> GSI 23 (level, low) -> IRQ 16Jul 23 10:01:52 paolo-desktop kernel: [ 33.656686] PCI: Setting latency timer of device 0000:00:14.0 to 64Jul 23 10:01:52 paolo-desktop kernel: [ 34.175532] forcedeth 0000:00:14.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:17:31:90:a4:d8Jul 23 10:01:52 paolo-desktop kernel: [ 34.175536] forcedeth 0000:00:14.0: highdma pwrctl timirq gbit lnktim desc-v3Jul 23 10:01:52 paolo-desktop kernel: [ 34.179052] pata_amd 0000:00:0d.0: version 0.3.10Jul 23 10:01:52 paolo-desktop kernel: [ 34.179099] PCI: Setting latency timer of device 0000:00:0d.0 to 64Jul 23 10:01:52 paolo-desktop kernel: [ 34.179601] scsi4 : pata_amdJul 23 10:01:52 paolo-desktop kernel: [ 34.180124] scsi5 : pata_amdJul 23 10:01:52 paolo-desktop kernel: [ 34.180722] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf400 irq 14Jul 23 10:01:52 paolo-desktop kernel: [ 34.180724] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf408 irq 15Jul 23 10:01:52 paolo-desktop kernel: [ 34.345328] ata5.00: ATA-7: Maxtor 6L080P0, BAJ41G20, max UDMA/133Jul 23 10:01:52 paolo-desktop kernel: [ 34.345331] ata5.00: 160086528 sectors, multi 1: LBA Jul 23 10:01:52 paolo-desktop kernel: [ 34.361200] ata5.00: configured for UDMA/133Jul 23 10:01:52 paolo-desktop kernel: [ 34.678867] ata6.00: ATAPI: HL-DT-ST DVDRAM GSA-H10N, JL10, max UDMA/33Jul 23 10:01:52 paolo-desktop kernel: [ 34.850616] ata6.00: configured for UDMA/33Jul 23 10:01:52 paolo-desktop kernel: [ 34.851248] scsi 4:0:0:0: Direct-Access ATA Maxtor 6L080P0 BAJ4 PQ: 0 ANSI: 5Jul 23 10:01:52 paolo-desktop kernel: [ 34.855061] scsi 5:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-H10N JL10 PQ: 0 ANSI: 5Jul 23 10:01:52 paolo-desktop kernel: [ 34.861024] Driver 'sd' needs updating - please use bus_type methodsJul 23 10:01:52 paolo-desktop kernel: [ 34.861104] sd 4:0:0:0: [sda] 160086528 512-byte hardware sectors (81964 MB)Jul 23 10:01:52 paolo-desktop kernel: [ 34.861115] sd 4:0:0:0: [sda] Write Protect is offJul 23 10:01:52 paolo-desktop kernel: [ 34.861117] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00Jul 23 10:01:52 paolo-desktop kernel: [ 34.861132] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUAJul 23 10:01:52 paolo-desktop kernel: [ 34.861181] sd 4:0:0:0: [sda] 160086528 512-byte hardware sectors (81964 MB)Jul 23 10:01:52 paolo-desktop kernel: [ 34.861188] sd 4:0:0:0: [sda] Write Protect is offJul 23 10:01:52 paolo-desktop kernel: [ 34.861190] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00Jul 23 10:01:52 paolo-desktop kernel: [ 34.861201] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUAJul 23 10:01:52 paolo-desktop kernel: [ 34.861204] sda:<4>Driver 'sr' needs updating - please use bus_type methodsJul 23 10:01:52 paolo-desktop kernel: [ 34.884698] sda1 sda2 < sda5 >Jul 23 10:01:52 paolo-desktop kernel: [ 34.910352] sd 4:0:0:0: [sda] Attached SCSI diskJul 23 10:01:52 paolo-desktop kernel: [ 34.914772] sd 4:0:0:0: Attached scsi generic sg0 type 0Jul 23 10:01:52 paolo-desktop kernel: [ 34.914790] sr 5:0:0:0: Attached scsi generic sg1 type 5Jul 23 10:01:52 paolo-desktop kernel: [ 34.928291] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda trayJul 23 10:01:52 paolo-desktop kernel: [ 34.928297] Uniform CD-ROM driver Revision: 3.20Jul 23 10:01:52 paolo-desktop kernel: [ 34.928343] sr 5:0:0:0: Attached scsi CD-ROM sr0Jul 23 10:01:52 paolo-desktop kernel: [ 35.180852] Attempting manual resumeJul 23 10:01:52 paolo-desktop kernel: [ 35.180856] swsusp: Resume From Partition 8:5Jul 23 10:01:52 paolo-desktop kernel: [ 35.180857] PM: Checking swsusp image.Jul 23 10:01:52 paolo-desktop kernel: [ 35.181000] PM: Resume from disk failed.Jul 23 10:01:52 paolo-desktop kernel: [ 35.220970] kjournald starting. Commit interval 5 secondsJul 23 10:01:52 paolo-desktop kernel: [ 35.221513] EXT3-fs: mounted filesystem with ordered data mode.Jul 23 10:01:52 paolo-desktop kernel: [ 43.594440] pci_hotplug: PCI Hot Plug PCI Core version: 0.5Jul 23 10:01:52 paolo-desktop kernel: [ 43.755383] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4Jul 23 10:01:52 paolo-desktop kernel: [ 43.840697] input: PC Speaker as /devices/platform/pcspkr/input/input2Jul 23 10:01:52 paolo-desktop kernel: [ 43.946995] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x4c00Jul 23 10:01:52 paolo-desktop kernel: [ 43.947021] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x4c40Jul 23 10:01:52 paolo-desktop kernel: [ 44.016681] input: Power Button (FF) as /devices/virtual/input/input3Jul 23 10:01:52 paolo-desktop kernel: [ 44.048316] ACPI: Power Button (FF) [PWRF]Jul 23 10:01:52 paolo-desktop kernel: [ 44.048420] input: Power Button (CM) as /devices/virtual/input/input4Jul 23 10:01:52 paolo-desktop kernel: [ 44.080276] ACPI: Power Button (CM) [PWRB]Jul 23 10:01:52 paolo-desktop kernel: [ 44.317668] Linux agpgart interface v0.102Jul 23 10:01:52 paolo-desktop kernel: [ 44.460215] parport_pc 00:09: reported by Plug and Play ACPIJul 23 10:01:52 paolo-desktop kernel: [ 44.460245] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]Jul 23 10:01:52 paolo-desktop kernel: [ 45.107833] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 22Jul 23 10:01:52 paolo-desktop kernel: [ 45.107839] ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [AAZA] -> GSI 22 (level, low) -> IRQ 17Jul 23 10:01:52 paolo-desktop kernel: [ 45.107859] PCI: Setting latency timer of device 0000:00:10.1 to 64Jul 23 10:01:52 paolo-desktop kernel: [ 45.182998] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input5Jul 23 10:01:52 paolo-desktop kernel: [ 45.529153] Linux video capture interface: v2.00Jul 23 10:01:52 paolo-desktop kernel: [ 45.554994] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: USB GSPCA camera found. (PAC207)Jul 23 10:01:52 paolo-desktop kernel: [ 45.566010] usbcore: registered new interface driver gspcaJul 23 10:01:52 paolo-desktop kernel: [ 45.566016] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: gspca driver 01.00.20 registeredJul 23 10:01:52 paolo-desktop kernel: [ 47.786154] lp0: using parport0 (interrupt-driven).Jul 23 10:01:52 paolo-desktop kernel: [ 47.843807] Adding 3020180k swap on /dev/sda5. Priority:-1 extents:1 across:3020180kJul 23 10:01:52 paolo-desktop kernel: [ 48.401630] EXT3 FS on sda1, internal journalJul 23 10:01:52 paolo-desktop kernel: [ 48.547029] device-mapper: uevent: version 1.0.3Jul 23 10:01:52 paolo-desktop kernel: [ 48.547056] device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.comJul 23 10:01:52 paolo-desktop kernel: [ 49.965278] ip_tables: (C) 2000-2006 Netfilter Core TeamJul 23 10:01:52 paolo-desktop kernel: [ 50.587682] No dock devices found.Jul 23 10:01:52 paolo-desktop kernel: [ 50.932864] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ processors (2 cpu cores) (version 2.20.00)Jul 23 10:01:52 paolo-desktop kernel: [ 50.932389] powernow-k8: MP systems not supported by PSB BIOS structureJul 23 10:01:52 paolo-desktop kernel: [ 50.932907] powernow-k8: MP systems not supported by PSB BIOS structureJul 23 10:01:57 paolo-desktop kernel: [ 55.695976] NET: Registered protocol family 10Jul 23 10:01:57 paolo-desktop kernel: [ 55.696201] lo: Disabled Privacy ExtensionsJul 23 10:02:01 paolo-desktop kernel: [ 60.461279] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)Jul 23 10:02:01 paolo-desktop kernel: [ 60.461284] apm: disabled - APM is not SMP safe.Jul 23 10:02:02 paolo-desktop kernel: [ 60.687523] ppdev: user-space parallel port driverJul 23 10:02:02 paolo-desktop kernel: [ 60.783359] audit(1216800122.132:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5381 profile="/usr/sbin/cupsd" namespace="default"Jul 23 10:02:12 paolo-desktop kernel: [ 71.046577] Bluetooth: Core ver 2.11Jul 23 10:02:12 paolo-desktop kernel: [ 71.047142] NET: Registered protocol family 31Jul 23 10:02:12 paolo-desktop kernel: [ 71.047147] Bluetooth: HCI device and connection manager initializedJul 23 10:02:12 paolo-desktop kernel: [ 71.047151] Bluetooth: HCI socket layer initializedJul 23 10:02:12 paolo-desktop kernel: [ 71.069129] Bluetooth: L2CAP ver 2.9Jul 23 10:02:12 paolo-desktop kernel: [ 71.069135] Bluetooth: L2CAP socket layer initializedJul 23 10:02:12 paolo-desktop kernel: [ 71.087761] Bluetooth: RFCOMM socket layer initializedJul 23 10:02:12 paolo-desktop kernel: [ 71.087776] Bluetooth: RFCOMM TTY layer initializedJul 23 10:02:12 paolo-desktop kernel: [ 71.087778] Bluetooth: RFCOMM ver 1.8Jul 23 10:02:16 paolo-desktop kernel: [ 75.097997] NET: Registered protocol family 17Jul 23 10:02:18 paolo-desktop kernel: [ 76.995830] lirc_dev: IR Remote Control driver registered, at major 61 Jul 23 10:02:18 paolo-desktop kernel: [ 77.324677] bttv: driver version 0.9.17 loadedJul 23 10:02:18 paolo-desktop kernel: [ 77.324684] bttv: using 8 buffers with 2080k (520 pages) each for captureJul 23 10:02:18 paolo-desktop kernel: [ 77.410048] ivtv: Start initialization, version 1.1.0Jul 23 10:02:18 paolo-desktop kernel: [ 77.410336] ivtv: End initializationJul 23 10:02:18 paolo-desktop kernel: [ 77.429901] cx88/0: cx2388x v4l2 driver version 0.0.6 loadedJul 23 10:02:40 paolo-desktop kernel: [ 100.422679] eth0: no IPv6 routers presentJul 23 11:00:30 paolo-desktop kernel: [ 3566.400078] eth0: link down.Jul 23 11:00:34 paolo-desktop kernel: [ 3570.831125] ip6_tables: (C) 2000-2006 Netfilter Core TeamJul 23 11:36:10 paolo-desktop kernel: Inspecting /boot/System.map-2.6.24-19-genericJul 23 11:36:10 paolo-desktop kernel: Loaded 27884 symbols from /boot/System.map-2.6.24-19-generic.Jul 23 11:36:10 paolo-desktop kernel: Symbols match kernel version 2.6.24.Jul 23 11:36:10 paolo-desktop kernel: Loaded 16714 symbols from 81 modules.Jul 23 11:36:10 paolo-desktop kernel: [ 0.000000] Initializing cgroup subsys cpusetJul 23 11:36:10 paolo-desktop kernel: [ 0.000000] Initializing cgroup subsys cpuJul 23 11:36:10 paolo-desktop kernel: [ 0.000000] Linux version 2.6.24-19-generic (buildd@terranova) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Fri Jul 11 23:41:49 UTC 2008 (Ubuntu 2.6.24-19.36-generic)Jul 23 11:36:10 paolo-desktop kernel: [ 0.000000] BIOS-provided physical RAM map:Jul 23 11:36:10 paolo-desktop kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)Jul 23 11:36:10 paolo-desktop kernel: [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)Jul 23 11:36:10 paolo-desktop kernel: [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)Jul 23 11:36:10 paolo-desktop kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 000000003fef0000 (usable)Jul 23 11:36:10 paolo-desktop kernel: [ 0.000000] BIOS-e820: 000000003fef0000 - 000000003fef3000 (ACPI NVS)Jul 23 11:36:10 paolo-desktop kernel: [ 0.000000] BIOS-e820: 000000003fef3000 - 000000003ff00000 (ACPI data)Jul 23 11:36:10 paolo-desktop kernel: [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)Jul 23 11:36:10 paolo-desktop kernel: [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)Jul 23 11:36:10 paolo-desktop kernel: [ 0.000000] 126MB HIGHMEM available.Jul 23 11:36:10 paolo-desktop kernel: [ 0.000000] 896MB LOWMEM available.Jul 23 11:36:10 paolo-desktop kernel: [ 0.000000] found SMP MP-table at 000f5790Jul 23 11:36:10 paolo-desktop kernel: [ 0.000000] Entering add_active_range(0, 0, 261872) 0 entries of 256 usedJul 23 11:36:10 paolo-desktop kernel: [ 0.000000] Zone PFN ranges:Jul 23 11:36:10 paolo-desktop kernel: [ 0.000000] DMA 0 -> 4096Jul 23 11:36:10 paolo-desktop kernel: [ 0.000000] Normal 4096 -> 229376Jul 23 11:36:10 paolo-desktop kernel: [ 0.000000] HighMem 229376 -> 261872Jul 23 11:36:10 paolo-desktop kernel: [ 0.000000] Movable zone start PFN for each nodeJul 23 11:36:10 paolo-desktop kernel: [ 0.000000] early_node_map[1] active PFN rangesJul 23 11:36:10 paolo-desktop kernel: [ 0.000000] 0: 0 -> 261872Jul 23 11:36:10 paolo-desktop kernel: [ 0.000000] On node 0 totalpages: 261872Jul 23 11:36:10 paolo-desktop kernel: [ 0.000000] DMA zone: 32 pages used for memmapJul 23 11:36:10 paolo-desktop kernel: [ 0.000000] DMA zone: 0 pages reservedJul 23 11:36:10 paolo-desktop kernel: [ 0.000000] DMA zone: 4064 pages, LIFO batch:0Jul 23 11:36:10 paolo-desktop kernel: [ 0.000000] Normal zone: 1760 pages used for memmapJul 23 11:36:10 paolo-desktop kernel: [ 0.000000] Normal zone: 223520 pages, LIFO batch:31Jul 23 11:36:10 paolo-desktop kernel: [ 0.000000] HighMem zone: 253 pages used for memmapJul 23 11:36:10 paolo-desktop kernel: [ 0.000000] HighMem zone: 32243 pages, LIFO batch:7Jul 23 11:36:10 paolo-desktop kernel: [ 0.000000] Movable zone: 0 pages used for memmapJul 23 11:36:10 paolo-desktop kernel: [ 0.000000] DMI 2.3 present.Jul 23 11:36:10 paolo-desktop kernel: [ 0.000000] ACPI: RSDP signature @ 0xC00F7240 checksum 0Jul 23 11:36:10 paolo-desktop kernel: [ 0.000000] ACPI: RSDP 000F7240, 0014 (r0 Nvidia)Jul 23 11:36:10 paolo-desktop kernel: [ 0.000000] ACPI: RSDT 3FEF3040, 0030 (r1 Nvidia AWRDACPI 42302E31 AWRD 0)Jul 23 11:36:10 paolo-desktop kernel: [ 0.000000] ACPI: FACP 3FEF30C0, 0074 (r1 Nvidia AWRDACPI 42302E31 AWRD 0)Jul 23 11:36:10 paolo-desktop kernel: [ 0.000000] ACPI: DSDT 3FEF3180, 7CAE (r1 NVIDIA AWRDACPI 1000 MSFT 100000E)Jul 23 11:36:10 paolo-desktop kernel: [ 0.000000] ACPI: FACS 3FEF0000, 0040Jul 23 11:36:10 paolo-desktop kernel: [ 0.000000] ACPI: MCFG 3FEFAF40, 003C (r1 Nvidia AWRDACPI 42302E31 AWRD 0)Jul 23 11:36:10 paolo-desktop kernel: [ 0.000000] ACPI: APIC 3FEFAE80, 007C (r1 Nvidia AWRDACPI 42302E31 AWRD 0)Jul 23 11:36:10 paolo-desktop kernel: [ 0.000000] Nvidia board detected. Ignoring ACPI timer override.Jul 23 11:36:10 paolo-desktop kernel: [ 0.000000] If you got timer trouble try acpi_use_timer_overrideJul 23 11:36:10 paolo-desktop kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x4008Jul 23 11:36:10 paolo-desktop kernel: [ 0.000000] ACPI: Local APIC address 0xfee00000Jul 23 11:36:10 paolo-desktop kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)Jul 23 11:36:10 paolo-desktop kernel: [ 0.000000] Processor #0 15:11 APIC version 16Jul 23 11:36:10 paolo-desktop kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)Jul 23 11:36:10 paolo-desktop kernel: [ 0.000000] Processor #1 15:11 APIC version 16Jul 23 11:36:10 paolo-desktop kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])Jul 23 11:36:10 paolo-desktop kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])Jul 23 11:36:10 paolo-desktop kernel: [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])Jul 23 11:36:10 paolo-desktop kernel: [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23Jul 23 11:36:10 paolo-desktop kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)Jul 23 11:36:10 paolo-desktop kernel: [ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored.Jul 23 11:36:10 paolo-desktop kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)Jul 23 11:36:10 paolo-desktop kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)Jul 23 11:36:10 paolo-desktop kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)Jul 23 11:36:10 paolo-desktop kernel: [ 0.000000] ACPI: IRQ9 used by override.Jul 23 11:36:10 paolo-desktop kernel: [ 0.000000] ACPI: IRQ14 used by override.Jul 23 11:36:10 paolo-desktop kernel: [ 0.000000] ACPI: IRQ15 used by override.Jul 23 11:36:10 paolo-desktop kernel: [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICsJul 23 11:36:10 paolo-desktop kernel: [ 0.000000] Using ACPI (MADT) for SMP configuration informationJul 23 11:36:10 paolo-desktop kernel: [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 3ff00000:b0100000)Jul 23 11:36:10 paolo-desktop kernel: [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000Jul 23 11:36:10 paolo-desktop kernel: [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000Jul 23 11:36:10 paolo-desktop kernel: [ 0.000000] swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000Jul 23 11:36:10 paolo-desktop kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259827Jul 23 11:36:10 paolo-desktop kernel: [ 0.000000] Kernel command line: root=UUID=50de9f9b-1da6-43e0-9750-d75c6ac2d2de ro quiet splashJul 23 11:36:10 paolo-desktop kernel: [ 0.000000] mapped APIC to ffffb000 (fee00000)Jul 23 11:36:10 paolo-desktop kernel: [ 0.000000] mapped IOAPIC to ffffa000 (fec00000)Jul 23 11:36:10 paolo-desktop kernel: [ 0.000000] Enabling fast FPU save and restore... done.Jul 23 11:36:10 paolo-desktop kernel: [ 0.000000] Enabling unmasked SIMD FPU exception support... done.Jul 23 11:36:10 paolo-desktop kernel: [ 0.000000] Initializing CPU#0Jul 23 11:36:10 paolo-desktop kernel: [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)Jul 23 11:36:10 paolo-desktop kernel: [ 0.000000] Detected 2204.666 MHz processor.Jul 23 11:36:10 paolo-desktop kernel: [ 19.492714] spurious 8259A interrupt: IRQ7.Jul 23 11:36:10 paolo-desktop kernel: [ 19.494866] Console: colour VGA+ 80x25Jul 23 11:36:10 paolo-desktop kernel: [ 19.494869] console [tty0] enabledJul 23 11:36:10 paolo-desktop kernel: [ 19.495230] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)Jul 23 11:36:10 paolo-desktop kernel: [ 19.495606] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)Jul 23 11:36:10 paolo-desktop kernel: [ 19.517210] Memory: 1025968k/1047488k available (2177k kernel code, 20896k reserved, 1006k data, 368k init, 129984k highmem)Jul 23 11:36:10 paolo-desktop kernel: [ 19.517217] virtual kernel memory layout:Jul 23 11:36:10 paolo-desktop kernel: [ 19.517218] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB)Jul 23 11:36:10 paolo-desktop kernel: [ 19.517219] pkmap : 0xff800000 - 0xffc00000 (4096 kB)Jul 23 11:36:10 paolo-desktop kernel: [ 19.517220] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)Jul 23 11:36:10 paolo-desktop kernel: [ 19.517221] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)Jul 23 11:36:10 paolo-desktop kernel: [ 19.517222] .init : 0xc0421000 - 0xc047d000 ( 368 kB)Jul 23 11:36:10 paolo-desktop kernel: [ 19.517223] .data : 0xc0320474 - 0xc041bdc4 (1006 kB)Jul 23 11:36:10 paolo-desktop kernel: [ 19.517224] .text : 0xc0100000 - 0xc0320474 (2177 kB)Jul 23 11:36:10 paolo-desktop kernel: [ 19.517227] Checking if this processor honours the WP bit even in supervisor mode... Ok.Jul 23 11:36:10 paolo-desktop kernel: [ 19.517262] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1Jul 23 11:36:10 paolo-desktop kernel: [ 19.597207] Calibrating delay using timer specific routine.. 4413.21 BogoMIPS (lpj=8826423)Jul 23 11:36:10 paolo-desktop kernel: [ 19.597232] Security Framework initializedJul 23 11:36:10 paolo-desktop kernel: [ 19.597237] SELinux: Disabled at boot.Jul 23 11:36:10 paolo-desktop kernel: [ 19.597252] AppArmor: AppArmor initializedJul 23 11:36:10 paolo-desktop kernel: [ 19.597255] Failure registering capabilities with primary security module.Jul 23 11:36:10 paolo-desktop kernel: [ 19.597263] Mount-cache hash table entries: 512Jul 23 11:36:10 paolo-desktop kernel: [ 19.597372] Initializing cgroup subsys nsJul 23 11:36:10 paolo-desktop kernel: [ 19.597376] Initializing cgroup subsys cpuacctJul 23 11:36:10 paolo-desktop kernel: [ 19.597385] CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000001f 00000000Jul 23 11:36:10 paolo-desktop kernel: [ 19.597392] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)Jul 23 11:36:10 paolo-desktop kernel: [ 19.597395] CPU: L2 Cache: 512K (64 bytes/line)Jul 23 11:36:10 paolo-desktop kernel: [ 19.597397] CPU 0(2) -> Core 0Jul 23 11:36:10 paolo-desktop kernel: [ 19.597398] CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000001f 00000000Jul 23 11:36:10 paolo-desktop kernel: [ 19.597407] Compat vDSO mapped to ffffe000.Jul 23 11:36:10 paolo-desktop kernel: [ 19.597417] Checking 'hlt' instruction... OK.Jul 23 11:36:10 paolo-desktop kernel: [ 19.613467] SMP alternatives: switching to UP codeJul 23 11:36:10 paolo-desktop kernel: [ 19.614602] Early unpacking initramfs... doneJul 23 11:36:10 paolo-desktop kernel: [ 19.905691] ACPI: Core revision 20070126Jul 23 11:36:10 paolo-desktop kernel: [ 19.905756] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.Jul 23 11:36:10 paolo-desktop kernel: [ 19.910522] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ stepping 02Jul 23 11:36:10 paolo-desktop kernel: [ 19.910537] SMP alternatives: switching to SMP codeJul 23 11:36:10 paolo-desktop kernel: [ 19.910952] Booting processor 1/1 eip 3000Jul 23 11:36:10 paolo-desktop kernel: [ 19.921337] Initializing CPU#1Jul 23 11:36:10 paolo-desktop kernel: [ 20.001212] Calibrating delay using timer specific routine.. 4409.53 BogoMIPS (lpj=8819066)Jul 23 11:36:10 paolo-desktop kernel: [ 20.001218] CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000001f 00000000Jul 23 11:36:10 paolo-desktop kernel: [ 20.001224] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)Jul 23 11:36:10 paolo-desktop kernel: [ 20.001226] CPU: L2 Cache: 512K (64 bytes/line)Jul 23 11:36:10 paolo-desktop kernel: [ 20.001228] CPU 1(2) -> Core 1Jul 23 11:36:10 paolo-desktop kernel: [ 20.001229] CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000001f 00000000Jul 23 11:36:10 paolo-desktop kernel: [ 20.000959] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ stepping 02Jul 23 11:36:10 paolo-desktop kernel: [ 20.000973] Total of 2 processors activated (8822.74 BogoMIPS).Jul 23 11:36:10 paolo-desktop kernel: [ 20.001268] ENABLING IO-APIC IRQsJul 23 11:36:10 paolo-desktop kernel: [ 20.001502] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1Jul 23 11:36:10 paolo-desktop kernel: [ 20.041202] ..MP-BIOS bug: 8254 timer not connected to IO-APICJul 23 11:36:10 paolo-desktop kernel: [ 20.041252] ...trying to set up timer (IRQ0) through the 8259A ... failed.Jul 23 11:36:10 paolo-desktop kernel: [ 20.041254] ...trying to set up timer as Virtual Wire IRQ... failed.Jul 23 11:36:10 paolo-desktop kernel: [ 20.080935] ...trying to set up timer as ExtINT IRQ... works.Jul 23 11:36:10 paolo-desktop kernel: [ 20.324609] Brought up 2 CPUsJul 23 11:36:10 paolo-desktop kernel: [ 20.324664] CPU0 attaching sched-domain:Jul 23 11:36:10 paolo-desktop kernel: [ 20.324666] domain 0: span 03Jul 23 11:36:10 paolo-desktop kernel: [ 20.324668] groups: 01 02Jul 23 11:36:10 paolo-desktop kernel: [ 20.324671] CPU1 attaching sched-domain:Jul 23 11:36:10 paolo-desktop kernel: [ 20.324672] domain 0: span 03Jul 23 11:36:10 paolo-desktop kernel: [ 20.324674] groups: 02 01Jul 23 11:36:10 paolo-desktop kernel: [ 20.324855] net_namespace: 64 bytesJul 23 11:36:10 paolo-desktop kernel: [ 20.324861] Booting paravirtualized kernel on bare hardwareJul 23 11:36:10 paolo-desktop kernel: [ 20.325255] Time: 9:35:48 Date: 07/23/08Jul 23 11:36:10 paolo-desktop kernel: [ 20.325280] NET: Registered protocol family 16Jul 23 11:36:10 paolo-desktop kernel: [ 20.325436] EISA bus registeredJul 23 11:36:10 paolo-desktop kernel: [ 20.325440] ACPI: bus type pci registeredJul 23 11:36:10 paolo-desktop kernel: [ 20.331884] PCI: PCI BIOS revision 3.00 entry at 0xf1ff0, last bus=4Jul 23 11:36:10 paolo-desktop kernel: [ 20.331886] PCI: Using configuration type 1Jul 23 11:36:10 paolo-desktop kernel: [ 20.331894] Setting up standard PCI resourcesJul 23 11:36:10 paolo-desktop kernel: [ 20.337139] ACPI: EC: Look up EC in DSDTJul 23 11:36:10 paolo-desktop kernel: [ 20.343992] ACPI: Interpreter enabledJul 23 11:36:10 paolo-desktop kernel: [ 20.343994] ACPI: (supports S0 S1 S3 S4 S5)Jul 23 11:36:10 paolo-desktop kernel: [ 20.344006] ACPI: Using IOAPIC for interrupt routingJul 23 11:36:10 paolo-desktop kernel: [ 20.354263] ACPI: PCI Root Bridge [PCI0] (0000:00)Jul 23 11:36:10 paolo-desktop kernel: [ 20.355214] PCI: Transparent bridge - 0000:00:10.0Jul 23 11:36:10 paolo-desktop kernel: [ 20.355231] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]Jul 23 11:36:10 paolo-desktop kernel: [ 20.355502] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]Jul 23 11:36:10 paolo-desktop kernel: [ 20.460389] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled.Jul 23 11:36:10 paolo-desktop kernel: [ 20.460582] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled.Jul 23 11:36:10 paolo-desktop kernel: [ 20.460772] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled.Jul 23 11:36:10 paolo-desktop kernel: [ 20.460962] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled.Jul 23 11:36:10 paolo-desktop kernel: [ 20.461153] ACPI: PCI Interrupt Link [LNK5] (IRQs *5 7 9 10 11 14 15)Jul 23 11:36:10 paolo-desktop kernel: [ 20.461343] ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled.Jul 23 11:36:10 paolo-desktop kernel: [ 20.461533] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled.Jul 23 11:36:10 paolo-desktop kernel: [ 20.461722] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.Jul 23 11:36:10 paolo-desktop kernel: [ 20.461913] ACPI: PCI Interrupt Link [LUBA] (IRQs *5 7 9 10 11 14 15)Jul 23 11:36:10 paolo-desktop kernel: [ 20.462102] ACPI: PCI Interrupt Link [LUBB] (IRQs 5 7 9 10 11 14 15) *0, disabled.Jul 23 11:36:10 paolo-desktop kernel: [ 20.462293] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 *11 14 15)Jul 23 11:36:10 paolo-desktop kernel: [ 20.462482] ACPI: PCI Interrupt Link [LACI] (IRQs 5 7 9 10 11 14 15) *0, disabled.Jul 23 11:36:10 paolo-desktop kernel: [ 20.462673] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 *11 14 15)Jul 23 11:36:10 paolo-desktop kernel: [ 20.462861] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.Jul 23 11:36:10 paolo-desktop kernel: [ 20.463051] ACPI: PCI Interrupt Link [LMCI] (IRQs 5 7 9 10 11 14 15) *0, disabled.Jul 23 11:36:10 paolo-desktop kernel: [ 20.463242] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 *10 11 14 15)Jul 23 11:36:10 paolo-desktop kernel: [ 20.463432] ACPI: PCI Interrupt Link [LUB2] (IRQs *5 7 9 10 11 14 15)Jul 23 11:36:10 paolo-desktop kernel: [ 20.463622] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.Jul 23 11:36:10 paolo-desktop kernel: [ 20.463812] ACPI: PCI Interrupt Link [LSID] (IRQs *5 7 9 10 11 14 15)Jul 23 11:36:10 paolo-desktop kernel: [ 20.464003] ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 10 *11 14 15)Jul 23 11:36:10 paolo-desktop kernel: [ 20.464222] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.Jul 23 11:36:10 paolo-desktop kernel: [ 20.464439] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.Jul 23 11:36:10 paolo-desktop kernel: [ 20.464653] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.Jul 23 11:36:10 paolo-desktop kernel: [ 20.464866] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.Jul 23 11:36:10 paolo-desktop kernel: [ 20.465079] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0Jul 23 11:36:10 paolo-desktop kernel: [ 20.465291] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled.Jul 23 11:36:10 paolo-desktop kernel: [ 20.465504] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled.Jul 23 11:36:10 paolo-desktop kernel: [ 20.465716] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.Jul 23 11:36:10 paolo-desktop kernel: [ 20.465930] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0Jul 23 11:36:10 paolo-desktop kernel: [ 20.466144] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.Jul 23 11:36:10 paolo-desktop kernel: [ 20.466357] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0Jul 23 11:36:10 paolo-desktop kernel: [ 20.466571] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled.Jul 23 11:36:10 paolo-desktop kernel: [ 20.466784] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.Jul 23 11:36:10 paolo-desktop kernel: [ 20.466998] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0Jul 23 11:36:10 paolo-desktop kernel: [ 20.467213] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.Jul 23 11:36:10 paolo-desktop kernel: [ 20.467427] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0Jul 23 11:36:10 paolo-desktop kernel: [ 20.467643] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0Jul 23 11:36:10 paolo-desktop kernel: [ 20.467862] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.Jul 23 11:36:10 paolo-desktop kernel: [ 20.468080] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.Jul 23 11:36:10 paolo-desktop kernel: [ 20.468299] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0Jul 23 11:36:10 paolo-desktop kernel: [ 20.468520] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0Jul 23 11:36:10 paolo-desktop kernel: [ 20.468652] Linux Plug and Play Support v0.97 (c) Adam BelayJul 23 11:36:10 paolo-desktop kernel: [ 20.468678] pnp: PnP ACPI initJul 23 11:36:10 paolo-desktop kernel: [ 20.468685] ACPI: bus type pnp registeredJul 23 11:36:10 paolo-desktop kernel: [ 20.474219] pnpacpi: exceeded the max number of mem resources: 12Jul 23 11:36:10 paolo-desktop kernel: [ 20.474324] pnp: PnP ACPI: found 14 devicesJul 23 11:36:10 paolo-desktop kernel: [ 20.474326] ACPI: ACPI bus type pnp unregisteredJul 23 11:36:10 paolo-desktop kernel: [ 20.474329] PnPBIOS: Disabled by ACPI PNPJul 23 11:36:10 paolo-desktop kernel: [ 20.474510] PCI: Using ACPI for IRQ routingJul 23 11:36:10 paolo-desktop kernel: [ 20.474515] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a reportJul 23 11:36:10 paolo-desktop kernel: [ 20.572271] NET: Registered protocol family 8Jul 23 11:36:10 paolo-desktop kernel: [ 20.572272] NET: Registered protocol family 20Jul 23 11:36:10 paolo-desktop kernel: [ 20.572331] AppArmor: AppArmor Filesystem EnabledJul 23 11:36:10 paolo-desktop kernel: [ 20.584281] system 00:01: ioport range 0x4000-0x407f has been reservedJul 23 11:36:10 paolo-desktop kernel: [ 20.584284] system 00:01: ioport range 0x4080-0x40ff has been reservedJul 23 11:36:10 paolo-desktop kernel: [ 20.584286] system 00:01: ioport range 0x4400-0x447f has been reservedJul 23 11:36:10 paolo-desktop kernel: [ 20.584288] system 00:01: ioport range 0x4480-0x44ff has been reservedJul 23 11:36:10 paolo-desktop kernel: [ 20.584291] system 00:01: ioport range 0x4800-0x487f has been reservedJul 23 11:36:10 paolo-desktop kernel: [ 20.584293] system 00:01: ioport range 0x4880-0x48ff has been reservedJul 23 11:36:10 paolo-desktop kernel: [ 20.584298] system 00:01: ioport range 0x2000-0x207f has been reservedJul 23 11:36:10 paolo-desktop kernel: [ 20.584300] system 00:01: ioport range 0x2080-0x20ff has been reservedJul 23 11:36:10 paolo-desktop kernel: [ 20.584303] system 00:01: iomem range 0x0-0x0 could not be reservedJul 23 11:36:10 paolo-desktop kernel: [ 20.584307] system 00:02: ioport range 0x4d0-0x4d1 has been reservedJul 23 11:36:10 paolo-desktop kernel: [ 20.584310] system 00:02: ioport range 0x800-0x87f has been reservedJul 23 11:36:10 paolo-desktop kernel: [ 20.584312] system 00:02: ioport range 0x290-0x297 has been reservedJul 23 11:36:10 paolo-desktop kernel: [ 20.584320] system 00:0c: iomem range 0xf0000000-0xf3ffffff could not be reservedJul 23 11:36:10 paolo-desktop kernel: [ 20.584326] system 00:0d: iomem range 0xf0000-0xf3fff could not be reservedJul 23 11:36:10 paolo-desktop kernel: [ 20.584328] system 00:0d: iomem range 0xf4000-0xf7fff could not be reservedJul 23 11:36:10 paolo-desktop kernel: [ 20.584330] system 00:0d: iomem range 0xf8000-0xfbfff could not be reservedJul 23 11:36:10 paolo-desktop kernel: [ 20.584333] system 00:0d: iomem range 0xfc000-0xfffff could not be reservedJul 23 11:36:10 paolo-desktop kernel: [ 20.584335] system 00:0d: iomem range 0x3fef0000-0x3fefffff could not be reservedJul 23 11:36:10 paolo-desktop kernel: [ 20.584338] system 00:0d: iomem range 0xffff0000-0xffffffff could not be reservedJul 23 11:36:10 paolo-desktop kernel: [ 20.584340] system 00:0d: iomem range 0x0-0x9ffff could not be reservedJul 23 11:36:10 paolo-desktop kernel: [ 20.584343] system 00:0d: iomem range 0x100000-0x3feeffff could not be reservedJul 23 11:36:10 paolo-desktop kernel: [ 20.584345] system 00:0d: iomem range 0x0-0x0 could not be reservedJul 23 11:36:10 paolo-desktop kernel: [ 20.584347] system 00:0d: iomem range 0xfec00000-0xfec00fff could not be reservedJul 23 11:36:10 paolo-desktop kernel: [ 20.584350] system 00:0d: iomem range 0xfee00000-0xfeefffff could not be reservedJul 23 11:36:10 paolo-desktop kernel: [ 20.584352] system 00:0d: iomem range 0xfefff000-0xfeffffff could not be reservedJul 23 11:36:10 paolo-desktop kernel: [ 20.614666] PCI: Bridge: 0000:00:02.0Jul 23 11:36:10 paolo-desktop kernel: [ 20.614668] IO window: a000-afffJul 23 11:36:10 paolo-desktop kernel: [ 20.614671] MEM window: fdd00000-fddfffffJul 23 11:36:10 paolo-desktop kernel: [ 20.614673] PREFETCH window: fda00000-fdafffffJul 23 11:36:10 paolo-desktop kernel: [ 20.614675] PCI: Bridge: 0000:00:03.0Jul 23 11:36:10 paolo-desktop kernel: [ 20.614677] IO window: 8000-8fffJul 23 11:36:10 paolo-desktop kernel: [ 20.614679] MEM window: fd900000-fd9fffffJul 23 11:36:10 paolo-desktop kernel: [ 20.614681] PREFETCH window: fde00000-fdefffffJul 23 11:36:10 paolo-desktop kernel: [ 20.614684] PCI: Bridge: 0000:00:04.0Jul 23 11:36:10 paolo-desktop kernel: [ 20.614685] IO window: b000-bfffJul 23 11:36:10 paolo-desktop kernel: [ 20.614687] MEM window: fa000000-fcffffffJul 23 11:36:10 paolo-desktop kernel: [ 20.614689] PREFETCH window: e0000000-efffffffJul 23 11:36:10 paolo-desktop kernel: [ 20.614692] PCI: Bridge: 0000:00:10.0Jul 23 11:36:10 paolo-desktop kernel: [ 20.614693] IO window: 9000-9fffJul 23 11:36:10 paolo-desktop kernel: [ 20.614696] MEM window: fdc00000-fdcfffffJul 23 11:36:10 paolo-desktop kernel: [ 20.614699] PREFETCH window: fdb00000-fdbfffffJul 23 11:36:10 paolo-desktop kernel: [ 20.614712] PCI: Setting latency timer of device 0000:00:02.0 to 64Jul 23 11:36:10 paolo-desktop kernel: [ 20.614718] PCI: Setting latency timer of device 0000:00:03.0 to 64Jul 23 11:36:10 paolo-desktop kernel: [ 20.614723] PCI: Setting latency timer of device 0000:00:04.0 to 64Jul 23 11:36:10 paolo-desktop kernel: [ 20.614730] PCI: Setting latency timer of device 0000:00:10.0 to 64Jul 23 11:36:10 paolo-desktop kernel: [ 20.614740] NET: Registered protocol family 2Jul 23 11:36:10 paolo-desktop kernel: [ 20.616222] Time: acpi_pm clocksource has been installed.Jul 23 11:36:10 paolo-desktop kernel: [ 20.616240] Switched to high resolution mode on CPU 0Jul 23 11:36:10 paolo-desktop kernel: [ 20.616749] Switched to high resolution mode on CPU 1Jul 23 11:36:10 paolo-desktop kernel: [ 20.652211] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)Jul 23 11:36:10 paolo-desktop kernel: [ 20.652467] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)Jul 23 11:36:10 paolo-desktop kernel: [ 20.653282] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)Jul 23 11:36:10 paolo-desktop kernel: [ 20.653714] TCP: Hash tables configured (established 131072 bind 65536)Jul 23 11:36:10 paolo-desktop kernel: [ 20.653716] TCP reno registeredJul 23 11:36:10 paolo-desktop kernel: [ 20.664270] checking if image is initramfs... it isJul 23 11:36:10 paolo-desktop kernel: [ 21.234499] Freeing initrd memory: 7725k freedJul 23 11:36:10 paolo-desktop kernel: [ 21.235689] audit: initializing netlink socket (disabled)Jul 23 11:36:10 paolo-desktop kernel: [ 21.235702] audit(1216805748.452:1): initializedJul 23 11:36:10 paolo-desktop kernel: [ 21.235845] highmem bounce pool size: 64 pagesJul 23 11:36:10 paolo-desktop kernel: [ 21.237522] VFS: Disk quotas dquot_6.5.1Jul 23 11:36:10 paolo-desktop kernel: [ 21.237584] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)Jul 23 11:36:10 paolo-desktop kernel: [ 21.237688] io scheduler noop registeredJul 23 11:36:10 paolo-desktop kernel: [ 21.237690] io scheduler anticipatory registeredJul 23 11:36:10 paolo-desktop kernel: [ 21.237692] io scheduler deadline registeredJul 23 11:36:10 paolo-desktop kernel: [ 21.237700] io scheduler cfq registered (default)Jul 23 11:36:10 paolo-desktop kernel: [ 21.237711] pci 0000:00:00.0: Enabling HT MSI MappingJul 23 11:36:10 paolo-desktop kernel: [ 21.237737] pci 0000:00:02.0: Enabling HT MSI MappingJul 23 11:36:10 paolo-desktop kernel: [ 21.237745] pci 0000:00:03.0: Enabling HT MSI MappingJul 23 11:36:10 paolo-desktop kernel: [ 21.237752] pci 0000:00:04.0: Enabling HT MSI MappingJul 23 11:36:10 paolo-desktop kernel: [ 21.237773] pci 0000:00:09.0: Enabling HT MSI MappingJul 23 11:36:10 paolo-desktop kernel: [ 21.252970] pci 0000:00:0e.0: Enabling HT MSI MappingJul 23 11:36:10 paolo-desktop kernel: [ 21.252980] pci 0000:00:0f.0: Enabling HT MSI MappingJul 23 11:36:10 paolo-desktop kernel: [ 21.252988] pci 0000:00:10.0: Enabling HT MSI MappingJul 23 11:36:10 paolo-desktop kernel: [ 21.252998] pci 0000:00:10.1: Enabling HT MSI MappingJul 23 11:36:10 paolo-desktop kernel: [ 21.253014] Boot video device is 0000:03:00.0Jul 23 11:36:10 paolo-desktop kernel: [ 21.253108] PCI: Setting latency timer of device 0000:00:02.0 to 64Jul 23 11:36:10 paolo-desktop kernel: [ 21.253127] assign_interrupt_mode Found MSI capabilityJul 23 11:36:10 paolo-desktop kernel: [ 21.253144] Allocate Port Service[0000:00:02.0:pcie00]Jul 23 11:36:10 paolo-desktop kernel: [ 21.253204] PCI: Setting latency timer of device 0000:00:03.0 to 64Jul 23 11:36:10 paolo-desktop kernel: [ 21.253222] assign_interrupt_mode Found MSI capabilityJul 23 11:36:10 paolo-desktop kernel: [ 21.253235] Allocate Port Service[0000:00:03.0:pcie00]Jul 23 11:36:10 paolo-desktop kernel: [ 21.253290] PCI: Setting latency timer of device 0000:00:04.0 to 64Jul 23 11:36:10 paolo-desktop kernel: [ 21.253308] assign_interrupt_mode Found MSI capabilityJul 23 11:36:10 paolo-desktop kernel: [ 21.253321] Allocate Port Service[0000:00:04.0:pcie00]Jul 23 11:36:10 paolo-desktop kernel: [ 21.253525] isapnp: Scanning for PnP cards...Jul 23 11:36:10 paolo-desktop kernel: [ 21.606027] isapnp: No Plug & Play device foundJul 23 11:36:10 paolo-desktop kernel: [ 21.630735] Real Time Clock Driver v1.12acJul 23 11:36:10 paolo-desktop kernel: [ 21.630858] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabledJul 23 11:36:10 paolo-desktop kernel: [ 21.630980] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550AJul 23 11:36:10 paolo-desktop kernel: [ 21.631519] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550AJul 23 11:36:10 paolo-desktop kernel: [ 21.632241] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksizeJul 23 11:36:10 paolo-desktop kernel: [ 21.632297] input: Macintosh mouse button emulation as /devices/virtual/input/input0Jul 23 11:36:10 paolo-desktop kernel: [ 21.632382] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12Jul 23 11:36:10 paolo-desktop kernel: [ 21.632786] serio: i8042 KBD port at 0x60,0x64 irq 1Jul 23 11:36:10 paolo-desktop kernel: [ 21.632791] serio: i8042 AUX port at 0x60,0x64 irq 12Jul 23 11:36:10 paolo-desktop kernel: [ 21.652572] mice: PS/2 mouse device common for all miceJul 23 11:36:10 paolo-desktop kernel: [ 21.652689] EISA: Probing bus 0 at eisa.0Jul 23 11:36:10 paolo-desktop kernel: [ 21.652697] Cannot allocate resource for EISA slot 2Jul 23 11:36:10 paolo-desktop kernel: [ 21.652702] Cannot allocate resource for EISA slot 4Jul 23 11:36:10 paolo-desktop kernel: [ 21.652711] Cannot allocate resource for EISA slot 8Jul 23 11:36:10 paolo-desktop kernel: [ 21.652713] EISA: Detected 0 cards.Jul 23 11:36:10 paolo-desktop kernel: [ 21.652716] cpuidle: using governor ladderJul 23 11:36:10 paolo-desktop kernel: [ 21.652718] cpuidle: using governor menuJul 23 11:36:10 paolo-desktop kernel: [ 21.652795] NET: Registered protocol family 1Jul 23 11:36:10 paolo-desktop kernel: [ 21.652819] Using IPI No-Shortcut modeJul 23 11:36:10 paolo-desktop kernel: [ 21.652851] registered taskstats version 1Jul 23 11:36:10 paolo-desktop kernel: [ 21.652961] Magic number: 0:716:576Jul 23 11:36:10 paolo-desktop kernel: [ 21.652963] hash matches /build/buildd/linux-2.6.24/drivers/base/power/main.c:97Jul 23 11:36:10 paolo-desktop kernel: [ 21.653025] hash matches device ptyb8Jul 23 11:36:10 paolo-desktop kernel: [ 21.653121] BIOS EDD facility v0.16 2004-Jun-25, 0 devices foundJul 23 11:36:10 paolo-desktop kernel: [ 21.653123] EDD information not available.Jul 23 11:36:10 paolo-desktop kernel: [ 21.653365] Freeing unused kernel memory: 368k freedJul 23 11:36:10 paolo-desktop kernel: [ 21.672495] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1Jul 23 11:36:10 paolo-desktop kernel: [ 22.879685] fuse init (API version 7.9)Jul 23 11:36:10 paolo-desktop kernel: [ 22.894916] ACPI: Fan [FAN] (on)Jul 23 11:36:10 paolo-desktop kernel: [ 22.900633] ACPI: Thermal Zone [THRM] (40 C)Jul 23 11:36:10 paolo-desktop kernel: [ 23.401646] usbcore: registered new interface driver usbfsJul 23 11:36:10 paolo-desktop kernel: [ 23.401670] usbcore: registered new interface driver hubJul 23 11:36:10 paolo-desktop kernel: [ 23.402381] usbcore: registered new device driver usbJul 23 11:36:10 paolo-desktop kernel: [ 23.403941] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) DriverJul 23 11:36:10 paolo-desktop kernel: [ 23.404356] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23Jul 23 11:36:10 paolo-desktop kernel: [ 23.404366] ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [APCF] -> GSI 23 (level, low) -> IRQ 16Jul 23 11:36:10 paolo-desktop kernel: [ 23.404378] PCI: Setting latency timer of device 0000:00:0b.0 to 64Jul 23 11:36:10 paolo-desktop kernel: [ 23.404381] ohci_hcd 0000:00:0b.0: OHCI Host ControllerJul 23 11:36:10 paolo-desktop kernel: [ 23.404674] ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 1Jul 23 11:36:10 paolo-desktop kernel: [ 23.404692] ohci_hcd 0000:00:0b.0: irq 16, io mem 0xfe02f000Jul 23 11:36:10 paolo-desktop kernel: [ 23.459227] usb usb1: configuration #1 chosen from 1 choiceJul 23 11:36:10 paolo-desktop kernel: [ 23.459258] hub 1-0:1.0: USB hub foundJul 23 11:36:10 paolo-desktop kernel: [ 23.459266] hub 1-0:1.0: 8 ports detectedJul 23 11:36:10 paolo-desktop kernel: [ 23.498016] SCSI subsystem initializedJul 23 11:36:10 paolo-desktop kernel: [ 23.533400] libata version 3.00 loaded.Jul 23 11:36:10 paolo-desktop kernel: [ 23.536755] Floppy drive(s): fd0 is 1.44MJul 23 11:36:10 paolo-desktop kernel: [ 23.553369] FDC 0 is a post-1991 82077Jul 23 11:36:10 paolo-desktop kernel: [ 23.561553] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.Jul 23 11:36:10 paolo-desktop kernel: [ 23.561938] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22Jul 23 11:36:10 paolo-desktop kernel: [ 23.561948] ACPI: PCI Interrupt 0000:00:14.0[A] -> Link [APCH] -> GSI 22 (level, low) -> IRQ 17Jul 23 11:36:10 paolo-desktop kernel: [ 23.561954] PCI: Setting latency timer of device 0000:00:14.0 to 64Jul 23 11:36:10 paolo-desktop kernel: [ 23.864664] usb 1-4: new full speed USB device using ohci_hcd and address 2Jul 23 11:36:10 paolo-desktop kernel: [ 24.082236] forcedeth 0000:00:14.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:17:31:90:a4:d8Jul 23 11:36:10 paolo-desktop kernel: [ 24.082241] forcedeth 0000:00:14.0: highdma pwrctl timirq gbit lnktim desc-v3Jul 23 11:36:10 paolo-desktop kernel: [ 24.082739] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 21Jul 23 11:36:10 paolo-desktop kernel: [ 24.082749] ACPI: PCI Interrupt 0000:00:0b.1[B] -> Link [APCL] -> GSI 21 (level, low) -> IRQ 18Jul 23 11:36:10 paolo-desktop kernel: [ 24.082760] PCI: Setting latency timer of device 0000:00:0b.1 to 64Jul 23 11:36:10 paolo-desktop kernel: [ 24.082762] ehci_hcd 0000:00:0b.1: EHCI Host ControllerJul 23 11:36:10 paolo-desktop kernel: [ 24.082789] ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 2Jul 23 11:36:10 paolo-desktop kernel: [ 24.082816] ehci_hcd 0000:00:0b.1: debug port 1Jul 23 11:36:10 paolo-desktop kernel: [ 24.082819] PCI: cache line size of 64 is not supported by device 0000:00:0b.1Jul 23 11:36:10 paolo-desktop kernel: [ 24.082832] ehci_hcd 0000:00:0b.1: irq 18, io mem 0xfe02e000Jul 23 11:36:10 paolo-desktop kernel: [ 24.083099] usb 1-4: configuration #1 chosen from 1 choiceJul 23 11:36:10 paolo-desktop kernel: [ 24.084907] usb 1-4: can't set config #1, error -62Jul 23 11:36:10 paolo-desktop kernel: [ 24.084951] usb 1-4: USB disconnect, address 2Jul 23 11:36:10 paolo-desktop kernel: [ 24.093832] ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004Jul 23 11:36:10 paolo-desktop kernel: [ 24.093912] usb usb2: configuration #1 chosen from 1 choiceJul 23 11:36:10 paolo-desktop kernel: [ 24.093930] hub 2-0:1.0: USB hub foundJul 23 11:36:10 paolo-desktop kernel: [ 24.093936] hub 2-0:1.0: 8 ports detectedJul 23 11:36:10 paolo-desktop kernel: [ 24.196888] sata_nv 0000:00:0e.0: version 3.5Jul 23 11:36:10 paolo-desktop kernel: [ 24.197257] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 20Jul 23 11:36:10 paolo-desktop kernel: [ 24.197267] ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [APSI] -> GSI 20 (level, low) -> IRQ 19Jul 23 11:36:10 paolo-desktop kernel: [ 24.197306] PCI: Setting latency timer of device 0000:00:0e.0 to 64Jul 23 11:36:10 paolo-desktop kernel: [ 24.198237] scsi0 : sata_nvJul 23 11:36:10 paolo-desktop kernel: [ 24.198859] scsi1 : sata_nvJul 23 11:36:10 paolo-desktop kernel: [ 24.199027] ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xe000 irq 19Jul 23 11:36:10 paolo-desktop kernel: [ 24.199031] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xe008 irq 19Jul 23 11:36:10 paolo-desktop kernel: [ 24.508374] ata1: SATA link down (SStatus 0 SControl 300)Jul 23 11:36:10 paolo-desktop kernel: [ 24.761085] usb 1-4: new full speed USB device using ohci_hcd and address 3Jul 23 11:36:10 paolo-desktop kernel: [ 24.829013] ata2: SATA link down (SStatus 0 SControl 300)Jul 23 11:36:10 paolo-desktop kernel: [ 24.839818] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 23Jul 23 11:36:10 paolo-desktop kernel: [ 24.839822] ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [APSJ] -> GSI 23 (level, low) -> IRQ 16Jul 23 11:36:10 paolo-desktop kernel: [ 24.839862] PCI: Setting latency timer of device 0000:00:0f.0 to 64Jul 23 11:36:10 paolo-desktop kernel: [ 24.839926] scsi2 : sata_nvJul 23 11:36:10 paolo-desktop kernel: [ 24.840172] scsi3 : sata_nvJul 23 11:36:10 paolo-desktop kernel: [ 24.840314] ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xcc00 irq 16Jul 23 11:36:10 paolo-desktop kernel: [ 24.840317] ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xcc08 irq 16Jul 23 11:36:10 paolo-desktop kernel: [ 24.974052] usb 1-4: configuration #1 chosen from 1 choiceJul 23 11:36:10 paolo-desktop kernel: [ 25.147668] ata3: SATA link down (SStatus 0 SControl 300)Jul 23 11:36:10 paolo-desktop kernel: [ 25.468311] ata4: SATA link down (SStatus 0 SControl 300)Jul 23 11:36:10 paolo-desktop kernel: [ 25.478853] PCI: Setting latency timer of device 0000:00:0d.0 to 64Jul 23 11:36:10 paolo-desktop kernel: [ 25.484902] pata_amd 0000:00:0d.0: version 0.3.10Jul 23 11:36:10 paolo-desktop kernel: [ 25.484950] PCI: Setting latency timer of device 0000:00:0d.0 to 64Jul 23 11:36:10 paolo-desktop kernel: [ 25.485484] scsi4 : pata_amdJul 23 11:36:10 paolo-desktop kernel: [ 25.486331] scsi5 : pata_amdJul 23 11:36:10 paolo-desktop kernel: [ 25.486926] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf400 irq 14Jul 23 11:36:10 paolo-desktop kernel: [ 25.486928] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf408 irq 15Jul 23 11:36:10 paolo-desktop kernel: [ 25.648962] ata5.00: ATA-7: Maxtor 6L080P0, BAJ41G20, max UDMA/133Jul 23 11:36:10 paolo-desktop kernel: [ 25.648966] ata5.00: 160086528 sectors, multi 1: LBA Jul 23 11:36:10 paolo-desktop kernel: [ 25.665831] ata5.00: configured for UDMA/133Jul 23 11:36:10 paolo-desktop kernel: [ 25.982635] ata6.00: ATAPI: HL-DT-ST DVDRAM GSA-H10N, JL10, max UDMA/33Jul 23 11:36:10 paolo-desktop kernel: [ 26.154386] ata6.00: configured for UDMA/33Jul 23 11:36:10 paolo-desktop kernel: [ 26.154892] scsi 4:0:0:0: Direct-Access ATA Maxtor 6L080P0 BAJ4 PQ: 0 ANSI: 5Jul 23 11:36:10 paolo-desktop kernel: [ 26.158702] scsi 5:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-H10N JL10 PQ: 0 ANSI: 5Jul 23 11:36:10 paolo-desktop kernel: [ 26.164094] Driver 'sd' needs updating - please use bus_type methodsJul 23 11:36:10 paolo-desktop kernel: [ 26.164184] sd 4:0:0:0: [sda] 160086528 512-byte hardware sectors (81964 MB)Jul 23 11:36:10 paolo-desktop kernel: [ 26.164195] sd 4:0:0:0: [sda] Write Protect is offJul 23 11:36:10 paolo-desktop kernel: [ 26.164197] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00Jul 23 11:36:10 paolo-desktop kernel: [ 26.164213] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUAJul 23 11:36:10 paolo-desktop kernel: [ 26.164254] sd 4:0:0:0: [sda] 160086528 512-byte hardware sectors (81964 MB)Jul 23 11:36:10 paolo-desktop kernel: [ 26.164261] sd 4:0:0:0: [sda] Write Protect is offJul 23 11:36:10 paolo-desktop kernel: [ 26.164263] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00Jul 23 11:36:10 paolo-desktop kernel: [ 26.164273] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUAJul 23 11:36:10 paolo-desktop kernel: [ 26.164276] sda:<4>Driver 'sr' needs updating - please use bus_type methodsJul 23 11:36:10 paolo-desktop kernel: [ 26.183628] sda1 sda2 < sda5 >Jul 23 11:36:10 paolo-desktop kernel: [ 26.209280] sd 4:0:0:0: [sda] Attached SCSI diskJul 23 11:36:10 paolo-desktop kernel: [ 26.213372] sd 4:0:0:0: Attached scsi generic sg0 type 0Jul 23 11:36:10 paolo-desktop kernel: [ 26.213388] sr 5:0:0:0: Attached scsi generic sg1 type 5Jul 23 11:36:10 paolo-desktop kernel: [ 26.228477] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda trayJul 23 11:36:10 paolo-desktop kernel: [ 26.228483] Uniform CD-ROM driver Revision: 3.20Jul 23 11:36:10 paolo-desktop kernel: [ 26.228532] sr 5:0:0:0: Attached scsi CD-ROM sr0Jul 23 11:36:10 paolo-desktop kernel: [ 26.424695] Attempting manual resumeJul 23 11:36:10 paolo-desktop kernel: [ 26.424699] swsusp: Resume From Partition 8:5Jul 23 11:36:10 paolo-desktop kernel: [ 26.424701] PM: Checking swsusp image.Jul 23 11:36:10 paolo-desktop kernel: [ 26.424851] PM: Resume from disk failed.Jul 23 11:36:10 paolo-desktop kernel: [ 26.445590] kjournald starting. Commit interval 5 secondsJul 23 11:36:10 paolo-desktop kernel: [ 26.445601] EXT3-fs: mounted filesystem with ordered data mode.Jul 23 11:36:10 paolo-desktop kernel: [ 35.029850] pci_hotplug: PCI Hot Plug PCI Core version: 0.5Jul 23 11:36:10 paolo-desktop kernel: [ 35.097891] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4Jul 23 11:36:10 paolo-desktop kernel: [ 35.138901] input: PC Speaker as /devices/platform/pcspkr/input/input2Jul 23 11:36:10 paolo-desktop kernel: [ 35.332249] input: Power Button (FF) as /devices/virtual/input/input3Jul 23 11:36:10 paolo-desktop kernel: [ 35.352255] ACPI: Power Button (FF) [PWRF]Jul 23 11:36:10 paolo-desktop kernel: [ 35.352332] input: Power Button (CM) as /devices/virtual/input/input4Jul 23 11:36:10 paolo-desktop kernel: [ 35.384034] ACPI: Power Button (CM) [PWRB]Jul 23 11:36:10 paolo-desktop kernel: [ 35.474166] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x4c00Jul 23 11:36:10 paolo-desktop kernel: [ 35.474180] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x4c40Jul 23 11:36:10 paolo-desktop kernel: [ 35.533231] Linux agpgart interface v0.102Jul 23 11:36:10 paolo-desktop kernel: [ 36.177677] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 22Jul 23 11:36:10 paolo-desktop kernel: [ 36.177683] ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [AAZA] -> GSI 22 (level, low) -> IRQ 17Jul 23 11:36:10 paolo-desktop kernel: [ 36.177707] PCI: Setting latency timer of device 0000:00:10.1 to 64Jul 23 11:36:10 paolo-desktop kernel: [ 36.507270] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input5Jul 23 11:36:10 paolo-desktop kernel: [ 36.779658] Linux video capture interface: v2.00Jul 23 11:36:10 paolo-desktop kernel: [ 36.853217] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: USB GSPCA camera found. (PAC207)Jul 23 11:36:10 paolo-desktop kernel: [ 36.855355] parport_pc 00:09: reported by Plug and Play ACPIJul 23 11:36:10 paolo-desktop kernel: [ 36.855384] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]Jul 23 11:36:10 paolo-desktop kernel: [ 36.863659] usbcore: registered new interface driver gspcaJul 23 11:36:10 paolo-desktop kernel: [ 36.863665] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: gspca driver 01.00.20 registeredJul 23 11:36:10 paolo-desktop kernel: [ 39.102369] lp0: using parport0 (interrupt-driven).Jul 23 11:36:10 paolo-desktop kernel: [ 39.158552] Adding 3020180k swap on /dev/sda5. Priority:-1 extents:1 across:3020180kJul 23 11:36:10 paolo-desktop kernel: [ 39.718321] EXT3 FS on sda1, internal journalJul 23 11:36:10 paolo-desktop kernel: [ 39.871476] device-mapper: uevent: version 1.0.3Jul 23 11:36:10 paolo-desktop kernel: [ 39.871503] device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.comJul 23 11:36:10 paolo-desktop kernel: [ 41.272213] ip_tables: (C) 2000-2006 Netfilter Core TeamJul 23 11:36:10 paolo-desktop kernel: [ 41.896998] No dock devices found.Jul 23 11:36:10 paolo-desktop kernel: [ 42.248217] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ processors (2 cpu cores) (version 2.20.00)Jul 23 11:36:10 paolo-desktop kernel: [ 42.247848] powernow-k8: MP systems not supported by PSB BIOS structureJul 23 11:36:10 paolo-desktop kernel: [ 42.248256] powernow-k8: MP systems not supported by PSB BIOS structureJul 23 11:36:14 paolo-desktop kernel: [ 46.611753] NET: Registered protocol family 10Jul 23 11:36:14 paolo-desktop kernel: [ 46.611962] lo: Disabled Privacy ExtensionsJul 23 11:36:19 paolo-desktop kernel: [ 51.635711] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)Jul 23 11:36:19 paolo-desktop kernel: [ 51.635718] apm: disabled - APM is not SMP safe.Jul 23 11:36:19 paolo-desktop kernel: [ 51.861947] ppdev: user-space parallel port driverJul 23 11:36:19 paolo-desktop kernel: [ 51.957063] audit(1216805779.983:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5372 profile="/usr/sbin/cupsd" namespace="default"Jul 23 11:36:30 paolo-desktop kernel: [ 62.385585] Bluetooth: Core ver 2.11Jul 23 11:36:30 paolo-desktop kernel: [ 62.385796] NET: Registered protocol family 31Jul 23 11:36:30 paolo-desktop kernel: [ 62.385798] Bluetooth: HCI device and connection manager initializedJul 23 11:36:30 paolo-desktop kernel: [ 62.385803] Bluetooth: HCI socket layer initializedJul 23 11:36:30 paolo-desktop kernel: [ 62.408436] Bluetooth: L2CAP ver 2.9Jul 23 11:36:30 paolo-desktop kernel: [ 62.408442] Bluetooth: L2CAP socket layer initializedJul 23 11:36:30 paolo-desktop kernel: [ 62.426334] Bluetooth: RFCOMM socket layer initializedJul 23 11:36:30 paolo-desktop kernel: [ 62.426352] Bluetooth: RFCOMM TTY layer initializedJul 23 11:36:30 paolo-desktop kernel: [ 62.426354] Bluetooth: RFCOMM ver 1.8Jul 23 11:36:34 paolo-desktop kernel: [ 66.429125] NET: Registered protocol family 17Jul 23 11:36:35 paolo-desktop kernel: [ 67.403419] lirc_dev: IR Remote Control driver registered, at major 61 Jul 23 11:36:35 paolo-desktop kernel: [ 67.762888] bttv: driver version 0.9.17 loadedJul 23 11:36:35 paolo-desktop kernel: [ 67.762894] bttv: using 8 buffers with 2080k (520 pages) each for captureJul 23 11:36:35 paolo-desktop kernel: [ 67.889570] ivtv: Start initialization, version 1.1.0Jul 23 11:36:35 paolo-desktop kernel: [ 67.889893] ivtv: End initializationJul 23 11:36:36 paolo-desktop kernel: [ 68.074364] cx88/0: cx2388x v4l2 driver version 0.0.6 loadedJul 23 11:36:56 paolo-desktop kernel: [ 88.046787] eth0: no IPv6 routers presentJul 23 11:40:05 paolo-desktop kernel: [ 277.761377] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)Jul 23 12:21:12 paolo-desktop kernel: [ 2742.193830] end_request: I/O error, dev fd0, sector 0Jul 23 12:21:12 paolo-desktop kernel: [ 2742.217801] end_request: I/O error, dev fd0, sector 0Jul 23 12:22:18 paolo-desktop kernel: [ 2808.177342] end_request: I/O error, dev fd0, sector 0Jul 23 12:22:18 paolo-desktop kernel: [ 2808.200927] end_request: I/O error, dev fd0, sector 0Jul 23 12:54:16 paolo-desktop kernel: [ 4723.604442] cdrom: This disc doesn't have any tracks I recognize!Jul 23 13:00:32 paolo-desktop kernel: [ 5099.402000] UDF-fs: No VRS foundJul 23 13:00:32 paolo-desktop kernel: [ 5099.424441] ISO 9660 Extensions: Microsoft Joliet Level 3Jul 23 13:00:32 paolo-desktop kernel: [ 5099.456044] ISO 9660 Extensions: RRIP_1991AJul 23 13:32:48 paolo-desktop kernel: [ 7033.177791] gdm[5787]: segfault at 6e61745f eip b76cbe66 esp bfb6f158 error 4Jul 23 13:32:54 paolo-desktop kernel: [ 7039.294557] ip6_tables: (C) 2000-2006 Netfilter Core TeamJul 23 13:34:09 paolo-desktop kernel: Inspecting /boot/System.map-2.6.24-19-genericJul 23 13:34:09 paolo-desktop kernel: Loaded 27884 symbols from /boot/System.map-2.6.24-19-generic.Jul 23 13:34:09 paolo-desktop kernel: Symbols match kernel version 2.6.24.Jul 23 13:34:10 paolo-desktop kernel: Loaded 34079 symbols from 87 modules.Jul 23 13:34:10 paolo-desktop kernel: [ 0.000000] Initializing cgroup subsys cpusetJul 23 13:34:10 paolo-desktop kernel: [ 0.000000] Initializing cgroup subsys cpuJul 23 13:34:10 paolo-desktop kernel: [ 0.000000] Linux version 2.6.24-19-generic (buildd@terranova) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Fri Jul 11 23:41:49 UTC 2008 (Ubuntu 2.6.24-19.36-generic)Jul 23 13:34:10 paolo-desktop kernel: [ 0.000000] BIOS-provided physical RAM map:Jul 23 13:34:10 paolo-desktop kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)Jul 23 13:34:10 paolo-desktop kernel: [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)Jul 23 13:34:10 paolo-desktop kernel: [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)Jul 23 13:34:10 paolo-desktop kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 000000003fef0000 (usable)Jul 23 13:34:10 paolo-desktop kernel: [ 0.000000] BIOS-e820: 000000003fef0000 - 000000003fef3000 (ACPI NVS)Jul 23 13:34:10 paolo-desktop kernel: [ 0.000000] BIOS-e820: 000000003fef3000 - 000000003ff00000 (ACPI data)Jul 23 13:34:10 paolo-desktop kernel: [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)Jul 23 13:34:10 paolo-desktop kernel: [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)Jul 23 13:34:10 paolo-desktop kernel: [ 0.000000] 126MB HIGHMEM available.Jul 23 13:34:10 paolo-desktop kernel: [ 0.000000] 896MB LOWMEM available.Jul 23 13:34:10 paolo-desktop kernel: [ 0.000000] found SMP MP-table at 000f5790Jul 23 13:34:10 paolo-desktop kernel: [ 0.000000] Entering add_active_range(0, 0, 261872) 0 entries of 256 usedJul 23 13:34:10 paolo-desktop kernel: [ 0.000000] Zone PFN ranges:Jul 23 13:34:10 paolo-desktop kernel: [ 0.000000] DMA 0 -> 4096Jul 23 13:34:10 paolo-desktop kernel: [ 0.000000] Normal 4096 -> 229376Jul 23 13:34:10 paolo-desktop kernel: [ 0.000000] HighMem 229376 -> 261872Jul 23 13:34:10 paolo-desktop kernel: [ 0.000000] Movable zone start PFN for each nodeJul 23 13:34:10 paolo-desktop kernel: [ 0.000000] early_node_map[1] active PFN rangesJul 23 13:34:10 paolo-desktop kernel: [ 0.000000] 0: 0 -> 261872Jul 23 13:34:10 paolo-desktop kernel: [ 0.000000] On node 0 totalpages: 261872Jul 23 13:34:10 paolo-desktop kernel: [ 0.000000] DMA zone: 32 pages used for memmapJul 23 13:34:10 paolo-desktop kernel: [ 0.000000] DMA zone: 0 pages reservedJul 23 13:34:10 paolo-desktop kernel: [ 0.000000] DMA zone: 4064 pages, LIFO batch:0Jul 23 13:34:10 paolo-desktop kernel: [ 0.000000] Normal zone: 1760 pages used for memmapJul 23 13:34:10 paolo-desktop kernel: [ 0.000000] Normal zone: 223520 pages, LIFO batch:31Jul 23 13:34:10 paolo-desktop kernel: [ 0.000000] HighMem zone: 253 pages used for memmapJul 23 13:34:10 paolo-desktop kernel: [ 0.000000] HighMem zone: 32243 pages, LIFO batch:7Jul 23 13:34:10 paolo-desktop kernel: [ 0.000000] Movable zone: 0 pages used for memmapJul 23 13:34:10 paolo-desktop kernel: [ 0.000000] DMI 2.3 present.Jul 23 13:34:10 paolo-desktop kernel: [ 0.000000] ACPI: RSDP signature @ 0xC00F7240 checksum 0Jul 23 13:34:10 paolo-desktop kernel: [ 0.000000] ACPI: RSDP 000F7240, 0014 (r0 Nvidia)Jul 23 13:34:10 paolo-desktop kernel: [ 0.000000] ACPI: RSDT 3FEF3040, 0030 (r1 Nvidia AWRDACPI 42302E31 AWRD 0)Jul 23 13:34:10 paolo-desktop kernel: [ 0.000000] ACPI: FACP 3FEF30C0, 0074 (r1 Nvidia AWRDACPI 42302E31 AWRD 0)Jul 23 13:34:10 paolo-desktop kernel: [ 0.000000] ACPI: DSDT 3FEF3180, 7CAE (r1 NVIDIA AWRDACPI 1000 MSFT 100000E)Jul 23 13:34:10 paolo-desktop kernel: [ 0.000000] ACPI: FACS 3FEF0000, 0040Jul 23 13:34:10 paolo-desktop kernel: [ 0.000000] ACPI: MCFG 3FEFAF40, 003C (r1 Nvidia AWRDACPI 42302E31 AWRD 0)Jul 23 13:34:10 paolo-desktop kernel: [ 0.000000] ACPI: APIC 3FEFAE80, 007C (r1 Nvidia AWRDACPI 42302E31 AWRD 0)Jul 23 13:34:10 paolo-desktop kernel: [ 0.000000] Nvidia board detected. Ignoring ACPI timer override.Jul 23 13:34:10 paolo-desktop kernel: [ 0.000000] If you got timer trouble try acpi_use_timer_overrideJul 23 13:34:10 paolo-desktop kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x4008Jul 23 13:34:10 paolo-desktop kernel: [ 0.000000] ACPI: Local APIC address 0xfee00000Jul 23 13:34:10 paolo-desktop kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)Jul 23 13:34:10 paolo-desktop kernel: [ 0.000000] Processor #0 15:11 APIC version 16Jul 23 13:34:10 paolo-desktop kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)Jul 23 13:34:10 paolo-desktop kernel: [ 0.000000] Processor #1 15:11 APIC version 16Jul 23 13:34:10 paolo-desktop kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])Jul 23 13:34:10 paolo-desktop kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])Jul 23 13:34:10 paolo-desktop kernel: [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])Jul 23 13:34:10 paolo-desktop kernel: [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23Jul 23 13:34:10 paolo-desktop kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)Jul 23 13:34:10 paolo-desktop kernel: [ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored.Jul 23 13:34:10 paolo-desktop kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)Jul 23 13:34:10 paolo-desktop kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)Jul 23 13:34:10 paolo-desktop kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)Jul 23 13:34:10 paolo-desktop kernel: [ 0.000000] ACPI: IRQ9 used by override.Jul 23 13:34:10 paolo-desktop kernel: [ 0.000000] ACPI: IRQ14 used by override.Jul 23 13:34:10 paolo-desktop kernel: [ 0.000000] ACPI: IRQ15 used by override.Jul 23 13:34:10 paolo-desktop kernel: [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICsJul 23 13:34:10 paolo-desktop kernel: [ 0.000000] Using ACPI (MADT) for SMP configuration informationJul 23 13:34:10 paolo-desktop kernel: [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 3ff00000:b0100000)Jul 23 13:34:10 paolo-desktop kernel: [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000Jul 23 13:34:10 paolo-desktop kernel: [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000Jul 23 13:34:10 paolo-desktop kernel: [ 0.000000] swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000Jul 23 13:34:10 paolo-desktop kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259827Jul 23 13:34:10 paolo-desktop kernel: [ 0.000000] Kernel command line: root=UUID=50de9f9b-1da6-43e0-9750-d75c6ac2d2de ro quiet splashJul 23 13:34:10 paolo-desktop kernel: [ 0.000000] mapped APIC to ffffb000 (fee00000)Jul 23 13:34:10 paolo-desktop kernel: [ 0.000000] mapped IOAPIC to ffffa000 (fec00000)Jul 23 13:34:10 paolo-desktop kernel: [ 0.000000] Enabling fast FPU save and restore... done.Jul 23 13:34:10 paolo-desktop kernel: [ 0.000000] Enabling unmasked SIMD FPU exception support... done.Jul 23 13:34:10 paolo-desktop kernel: [ 0.000000] Initializing CPU#0Jul 23 13:34:10 paolo-desktop kernel: [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)Jul 23 13:34:10 paolo-desktop kernel: [ 0.000000] Detected 2204.600 MHz processor.Jul 23 13:34:10 paolo-desktop kernel: [ 33.031706] spurious 8259A interrupt: IRQ7.Jul 23 13:34:10 paolo-desktop kernel: [ 33.033861] Console: colour VGA+ 80x25Jul 23 13:34:10 paolo-desktop kernel: [ 33.033864] console [tty0] enabledJul 23 13:34:10 paolo-desktop kernel: [ 33.034224] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)Jul 23 13:34:10 paolo-desktop kernel: [ 33.034600] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)Jul 23 13:34:10 paolo-desktop kernel: [ 33.056203] Memory: 1025968k/1047488k available (2177k kernel code, 20896k reserved, 1006k data, 368k init, 129984k highmem)Jul 23 13:34:10 paolo-desktop kernel: [ 33.056210] virtual kernel memory layout:Jul 23 13:34:10 paolo-desktop kernel: [ 33.056211] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB)Jul 23 13:34:10 paolo-desktop kernel: [ 33.056212] pkmap : 0xff800000 - 0xffc00000 (4096 kB)Jul 23 13:34:10 paolo-desktop kernel: [ 33.056213] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)Jul 23 13:34:10 paolo-desktop kernel: [ 33.056214] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)Jul 23 13:34:10 paolo-desktop kernel: [ 33.056215] .init : 0xc0421000 - 0xc047d000 ( 368 kB)Jul 23 13:34:10 paolo-desktop kernel: [ 33.056216] .data : 0xc0320474 - 0xc041bdc4 (1006 kB)Jul 23 13:34:10 paolo-desktop kernel: [ 33.056217] .text : 0xc0100000 - 0xc0320474 (2177 kB)Jul 23 13:34:10 paolo-desktop kernel: [ 33.056220] Checking if this processor honours the WP bit even in supervisor mode... Ok.Jul 23 13:34:10 paolo-desktop kernel: [ 33.056254] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1Jul 23 13:34:10 paolo-desktop kernel: [ 33.136200] Calibrating delay using timer specific routine.. 4413.22 BogoMIPS (lpj=8826442)Jul 23 13:34:10 paolo-desktop kernel: [ 33.136224] Security Framework initializedJul 23 13:34:10 paolo-desktop kernel: [ 33.136230] SELinux: Disabled at boot.Jul 23 13:34:10 paolo-desktop kernel: [ 33.136244] AppArmor: AppArmor initializedJul 23 13:34:10 paolo-desktop kernel: [ 33.136248] Failure registering capabilities with primary security module.Jul 23 13:34:10 paolo-desktop kernel: [ 33.136255] Mount-cache hash table entries: 512Jul 23 13:34:10 paolo-desktop kernel: [ 33.136365] Initializing cgroup subsys nsJul 23 13:34:10 paolo-desktop kernel: [ 33.136368] Initializing cgroup subsys cpuacctJul 23 13:34:10 paolo-desktop kernel: [ 33.136378] CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000001f 00000000Jul 23 13:34:10 paolo-desktop kernel: [ 33.136385] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)Jul 23 13:34:10 paolo-desktop kernel: [ 33.136387] CPU: L2 Cache: 512K (64 bytes/line)Jul 23 13:34:10 paolo-desktop kernel: [ 33.136390] CPU 0(2) -> Core 0Jul 23 13:34:10 paolo-desktop kernel: [ 33.136391] CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000001f 00000000Jul 23 13:34:10 paolo-desktop kernel: [ 33.136400] Compat vDSO mapped to ffffe000.Jul 23 13:34:10 paolo-desktop kernel: [ 33.136410] Checking 'hlt' instruction... OK.Jul 23 13:34:10 paolo-desktop kernel: [ 33.152460] SMP alternatives: switching to UP codeJul 23 13:34:10 paolo-desktop kernel: [ 33.153595] Early unpacking initramfs... doneJul 23 13:34:10 paolo-desktop kernel: [ 33.444685] ACPI: Core revision 20070126Jul 23 13:34:10 paolo-desktop kernel: [ 33.444750] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.Jul 23 13:34:10 paolo-desktop kernel: [ 33.449519] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ stepping 02Jul 23 13:34:10 paolo-desktop kernel: [ 33.449534] SMP alternatives: switching to SMP codeJul 23 13:34:10 paolo-desktop kernel: [ 33.449950] Booting processor 1/1 eip 3000Jul 23 13:34:10 paolo-desktop kernel: [ 33.460352] Initializing CPU#1Jul 23 13:34:10 paolo-desktop kernel: [ 33.540227] Calibrating delay using timer specific routine.. 4409.52 BogoMIPS (lpj=8819049)Jul 23 13:34:10 paolo-desktop kernel: [ 33.540233] CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000001f 00000000Jul 23 13:34:10 paolo-desktop kernel: [ 33.540239] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)Jul 23 13:34:10 paolo-desktop kernel: [ 33.540241] CPU: L2 Cache: 512K (64 bytes/line)Jul 23 13:34:10 paolo-desktop kernel: [ 33.540243] CPU 1(2) -> Core 1Jul 23 13:34:10 paolo-desktop kernel: [ 33.540244] CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000001f 00000000Jul 23 13:34:10 paolo-desktop kernel: [ 33.539952] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ stepping 02Jul 23 13:34:10 paolo-desktop kernel: [ 33.539966] Total of 2 processors activated (8822.74 BogoMIPS).Jul 23 13:34:10 paolo-desktop kernel: [ 33.540262] ENABLING IO-APIC IRQsJul 23 13:34:10 paolo-desktop kernel: [ 33.540496] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1Jul 23 13:34:10 paolo-desktop kernel: [ 33.580196] ..MP-BIOS bug: 8254 timer not connected to IO-APICJul 23 13:34:10 paolo-desktop kernel: [ 33.580247] ...trying to set up timer (IRQ0) through the 8259A ... failed.Jul 23 13:34:10 paolo-desktop kernel: [ 33.580249] ...trying to set up timer as Virtual Wire IRQ... failed.Jul 23 13:34:10 paolo-desktop kernel: [ 33.619930] ...trying to set up timer as ExtINT IRQ... works.Jul 23 13:34:10 paolo-desktop kernel: [ 33.863602] Brought up 2 CPUsJul 23 13:34:10 paolo-desktop kernel: [ 33.863656] CPU0 attaching sched-domain:Jul 23 13:34:10 paolo-desktop kernel: [ 33.863659] domain 0: span 03Jul 23 13:34:10 paolo-desktop kernel: [ 33.863661] groups: 01 02Jul 23 13:34:10 paolo-desktop kernel: [ 33.863663] CPU1 attaching sched-domain:Jul 23 13:34:10 paolo-desktop kernel: [ 33.863665] domain 0: span 03Jul 23 13:34:10 paolo-desktop kernel: [ 33.863666] groups: 02 01Jul 23 13:34:10 paolo-desktop kernel: [ 33.863846] net_namespace: 64 bytesJul 23 13:34:10 paolo-desktop kernel: [ 33.863853] Booting paravirtualized kernel on bare hardwareJul 23 13:34:10 paolo-desktop kernel: [ 33.864247] Time: 11:33:41 Date: 07/23/08Jul 23 13:34:10 paolo-desktop kernel: [ 33.864272] NET: Registered protocol family 16Jul 23 13:34:10 paolo-desktop kernel: [ 33.864427] EISA bus registeredJul 23 13:34:10 paolo-desktop kernel: [ 33.864431] ACPI: bus type pci registeredJul 23 13:34:10 paolo-desktop kernel: [ 33.870901] PCI: PCI BIOS revision 3.00 entry at 0xf1ff0, last bus=4Jul 23 13:34:10 paolo-desktop kernel: [ 33.870903] PCI: Using configuration type 1Jul 23 13:34:10 paolo-desktop kernel: [ 33.870911] Setting up standard PCI resourcesJul 23 13:34:10 paolo-desktop kernel: [ 33.876155] ACPI: EC: Look up EC in DSDTJul 23 13:34:10 paolo-desktop kernel: [ 33.883008] ACPI: Interpreter enabledJul 23 13:34:10 paolo-desktop kernel: [ 33.883011] ACPI: (supports S0 S1 S3 S4 S5)Jul 23 13:34:10 paolo-desktop kernel: [ 33.883022] ACPI: Using IOAPIC for interrupt routingJul 23 13:34:10 paolo-desktop kernel: [ 33.893281] ACPI: PCI Root Bridge [PCI0] (0000:00)Jul 23 13:34:10 paolo-desktop kernel: [ 33.894234] PCI: Transparent bridge - 0000:00:10.0Jul 23 13:34:10 paolo-desktop kernel: [ 33.894250] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]Jul 23 13:34:10 paolo-desktop kernel: [ 33.894521] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]Jul 23 13:34:10 paolo-desktop kernel: [ 33.999040] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled.Jul 23 13:34:10 paolo-desktop kernel: [ 33.999233] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled.Jul 23 13:34:10 paolo-desktop kernel: [ 33.999428] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled.Jul 23 13:34:10 paolo-desktop kernel: [ 33.999619] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled.Jul 23 13:34:10 paolo-desktop kernel: [ 33.999811] ACPI: PCI Interrupt Link [LNK5] (IRQs *5 7 9 10 11 14 15)Jul 23 13:34:10 paolo-desktop kernel: [ 34.000000] ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled.Jul 23 13:34:10 paolo-desktop kernel: [ 34.000190] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled.Jul 23 13:34:10 paolo-desktop kernel: [ 34.000380] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.Jul 23 13:34:10 paolo-desktop kernel: [ 34.000572] ACPI: PCI Interrupt Link [LUBA] (IRQs *5 7 9 10 11 14 15)Jul 23 13:34:10 paolo-desktop kernel: [ 34.000760] ACPI: PCI Interrupt Link [LUBB] (IRQs 5 7 9 10 11 14 15) *0, disabled.Jul 23 13:34:10 paolo-desktop kernel: [ 34.000952] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 *11 14 15)Jul 23 13:34:10 paolo-desktop kernel: [ 34.001140] ACPI: PCI Interrupt Link [LACI] (IRQs 5 7 9 10 11 14 15) *0, disabled.Jul 23 13:34:10 paolo-desktop kernel: [ 34.001331] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 *11 14 15)Jul 23 13:34:10 paolo-desktop kernel: [ 34.001520] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.Jul 23 13:34:10 paolo-desktop kernel: [ 34.001710] ACPI: PCI Interrupt Link [LMCI] (IRQs 5 7 9 10 11 14 15) *0, disabled.Jul 23 13:34:10 paolo-desktop kernel: [ 34.001901] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 *10 11 14 15)Jul 23 13:34:10 paolo-desktop kernel: [ 34.002091] ACPI: PCI Interrupt Link [LUB2] (IRQs *5 7 9 10 11 14 15)Jul 23 13:34:10 paolo-desktop kernel: [ 34.002280] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.Jul 23 13:34:10 paolo-desktop kernel: [ 34.002471] ACPI: PCI Interrupt Link [LSID] (IRQs *5 7 9 10 11 14 15)Jul 23 13:34:10 paolo-desktop kernel: [ 34.002661] ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 10 *11 14 15)Jul 23 13:34:10 paolo-desktop kernel: [ 34.002880] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.Jul 23 13:34:10 paolo-desktop kernel: [ 34.003094] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.Jul 23 13:34:10 paolo-desktop kernel: [ 34.003307] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.Jul 23 13:34:10 paolo-desktop kernel: [ 34.003524] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.Jul 23 13:34:10 paolo-desktop kernel: [ 34.003736] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0Jul 23 13:34:10 paolo-desktop kernel: [ 34.003948] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled.Jul 23 13:34:10 paolo-desktop kernel: [ 34.004161] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled.Jul 23 13:34:10 paolo-desktop kernel: [ 34.004373] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.Jul 23 13:34:10 paolo-desktop kernel: [ 34.004586] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0Jul 23 13:34:10 paolo-desktop kernel: [ 34.004800] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.Jul 23 13:34:10 paolo-desktop kernel: [ 34.005014] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0Jul 23 13:34:10 paolo-desktop kernel: [ 34.005227] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled.Jul 23 13:34:10 paolo-desktop kernel: [ 34.005441] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.Jul 23 13:34:10 paolo-desktop kernel: [ 34.005656] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0Jul 23 13:34:10 paolo-desktop kernel: [ 34.005870] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.Jul 23 13:34:10 paolo-desktop kernel: [ 34.006084] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0Jul 23 13:34:10 paolo-desktop kernel: [ 34.006301] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0Jul 23 13:34:10 paolo-desktop kernel: [ 34.006519] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.Jul 23 13:34:10 paolo-desktop kernel: [ 34.006737] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.Jul 23 13:34:10 paolo-desktop kernel: [ 34.006956] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0Jul 23 13:34:10 paolo-desktop kernel: [ 34.007174] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0Jul 23 13:34:10 paolo-desktop kernel: [ 34.007307] Linux Plug and Play Support v0.97 (c) Adam BelayJul 23 13:34:10 paolo-desktop kernel: [ 34.007332] pnp: PnP ACPI initJul 23 13:34:10 paolo-desktop kernel: [ 34.007338] ACPI: bus type pnp registeredJul 23 13:34:10 paolo-desktop kernel: [ 34.012877] pnpacpi: exceeded the max number of mem resources: 12Jul 23 13:34:10 paolo-desktop kernel: [ 34.012983] pnp: PnP ACPI: found 14 devicesJul 23 13:34:10 paolo-desktop kernel: [ 34.012985] ACPI: ACPI bus type pnp unregisteredJul 23 13:34:10 paolo-desktop kernel: [ 34.012988] PnPBIOS: Disabled by ACPI PNPJul 23 13:34:10 paolo-desktop kernel: [ 34.013167] PCI: Using ACPI for IRQ routingJul 23 13:34:10 paolo-desktop kernel: [ 34.013172] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a reportJul 23 13:34:10 paolo-desktop kernel: [ 34.111264] NET: Registered protocol family 8Jul 23 13:34:10 paolo-desktop kernel: [ 34.111266] NET: Registered protocol family 20Jul 23 13:34:10 paolo-desktop kernel: [ 34.111325] AppArmor: AppArmor Filesystem EnabledJul 23 13:34:10 paolo-desktop kernel: [ 34.123276] system 00:01: ioport range 0x4000-0x407f has been reservedJul 23 13:34:10 paolo-desktop kernel: [ 34.123278] system 00:01: ioport range 0x4080-0x40ff has been reservedJul 23 13:34:10 paolo-desktop kernel: [ 34.123280] system 00:01: ioport range 0x4400-0x447f has been reservedJul 23 13:34:10 paolo-desktop kernel: [ 34.123283] system 00:01: ioport range 0x4480-0x44ff has been reservedJul 23 13:34:10 paolo-desktop kernel: [ 34.123285] system 00:01: ioport range 0x4800-0x487f has been reservedJul 23 13:34:10 paolo-desktop kernel: [ 34.123287] system 00:01: ioport range 0x4880-0x48ff has been reservedJul 23 13:34:10 paolo-desktop kernel: [ 34.123292] system 00:01: ioport range 0x2000-0x207f has been reservedJul 23 13:34:10 paolo-desktop kernel: [ 34.123294] system 00:01: ioport range 0x2080-0x20ff has been reservedJul 23 13:34:10 paolo-desktop kernel: [ 34.123297] system 00:01: iomem range 0x0-0x0 could not be reservedJul 23 13:34:10 paolo-desktop kernel: [ 34.123301] system 00:02: ioport range 0x4d0-0x4d1 has been reservedJul 23 13:34:10 paolo-desktop kernel: [ 34.123304] system 00:02: ioport range 0x800-0x87f has been reservedJul 23 13:34:10 paolo-desktop kernel: [ 34.123306] system 00:02: ioport range 0x290-0x297 has been reservedJul 23 13:34:10 paolo-desktop kernel: [ 34.123314] system 00:0c: iomem range 0xf0000000-0xf3ffffff could not be reservedJul 23 13:34:10 paolo-desktop kernel: [ 34.123319] system 00:0d: iomem range 0xf0000-0xf3fff could not be reservedJul 23 13:34:10 paolo-desktop kernel: [ 34.123321] system 00:0d: iomem range 0xf4000-0xf7fff could not be reservedJul 23 13:34:10 paolo-desktop kernel: [ 34.123324] system 00:0d: iomem range 0xf8000-0xfbfff could not be reservedJul 23 13:34:10 paolo-desktop kernel: [ 34.123326] system 00:0d: iomem range 0xfc000-0xfffff could not be reservedJul 23 13:34:10 paolo-desktop kernel: [ 34.123329] system 00:0d: iomem range 0x3fef0000-0x3fefffff could not be reservedJul 23 13:34:10 paolo-desktop kernel: [ 34.123331] system 00:0d: iomem range 0xffff0000-0xffffffff could not be reservedJul 23 13:34:10 paolo-desktop kernel: [ 34.123333] system 00:0d: iomem range 0x0-0x9ffff could not be reservedJul 23 13:34:10 paolo-desktop kernel: [ 34.123336] system 00:0d: iomem range 0x100000-0x3feeffff could not be reservedJul 23 13:34:10 paolo-desktop kernel: [ 34.123338] system 00:0d: iomem range 0x0-0x0 could not be reservedJul 23 13:34:10 paolo-desktop kernel: [ 34.123341] system 00:0d: iomem range 0xfec00000-0xfec00fff could not be reservedJul 23 13:34:10 paolo-desktop kernel: [ 34.123343] system 00:0d: iomem range 0xfee00000-0xfeefffff could not be reservedJul 23 13:34:10 paolo-desktop kernel: [ 34.123346] system 00:0d: iomem range 0xfefff000-0xfeffffff could not be reservedJul 23 13:34:10 paolo-desktop kernel: [ 34.153659] PCI: Bridge: 0000:00:02.0Jul 23 13:34:10 paolo-desktop kernel: [ 34.153661] IO window: a000-afffJul 23 13:34:10 paolo-desktop kernel: [ 34.153664] MEM window: fdd00000-fddfffffJul 23 13:34:10 paolo-desktop kernel: [ 34.153666] PREFETCH window: fda00000-fdafffffJul 23 13:34:10 paolo-desktop kernel: [ 34.153668] PCI: Bridge: 0000:00:03.0Jul 23 13:34:10 paolo-desktop kernel: [ 34.153670] IO window: 8000-8fffJul 23 13:34:10 paolo-desktop kernel: [ 34.153672] MEM window: fd900000-fd9fffffJul 23 13:34:10 paolo-desktop kernel: [ 34.153674] PREFETCH window: fde00000-fdefffffJul 23 13:34:10 paolo-desktop kernel: [ 34.153676] PCI: Bridge: 0000:00:04.0Jul 23 13:34:10 paolo-desktop kernel: [ 34.153678] IO window: b000-bfffJul 23 13:34:10 paolo-desktop kernel: [ 34.153680] MEM window: fa000000-fcffffffJul 23 13:34:10 paolo-desktop kernel: [ 34.153682] PREFETCH window: e0000000-efffffffJul 23 13:34:10 paolo-desktop kernel: [ 34.153684] PCI: Bridge: 0000:00:10.0Jul 23 13:34:10 paolo-desktop kernel: [ 34.153686] IO window: 9000-9fffJul 23 13:34:10 paolo-desktop kernel: [ 34.153689] MEM window: fdc00000-fdcfffffJul 23 13:34:10 paolo-desktop kernel: [ 34.153691] PREFETCH window: fdb00000-fdbfffffJul 23 13:34:10 paolo-desktop kernel: [ 34.153704] PCI: Setting latency timer of device 0000:00:02.0 to 64Jul 23 13:34:10 paolo-desktop kernel: [ 34.153710] PCI: Setting latency timer of device 0000:00:03.0 to 64Jul 23 13:34:10 paolo-desktop kernel: [ 34.153715] PCI: Setting latency timer of device 0000:00:04.0 to 64Jul 23 13:34:10 paolo-desktop kernel: [ 34.153722] PCI: Setting latency timer of device 0000:00:10.0 to 64Jul 23 13:34:10 paolo-desktop kernel: [ 34.153732] NET: Registered protocol family 2Jul 23 13:34:10 paolo-desktop kernel: [ 34.155215] Time: acpi_pm clocksource has been installed.Jul 23 13:34:10 paolo-desktop kernel: [ 34.155233] Switched to high resolution mode on CPU 0Jul 23 13:34:10 paolo-desktop kernel: [ 34.155764] Switched to high resolution mode on CPU 1Jul 23 13:34:10 paolo-desktop kernel: [ 34.191208] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)Jul 23 13:34:10 paolo-desktop kernel: [ 34.191468] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)Jul 23 13:34:10 paolo-desktop kernel: [ 34.192283] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)Jul 23 13:34:10 paolo-desktop kernel: [ 34.192714] TCP: Hash tables configured (established 131072 bind 65536)Jul 23 13:34:10 paolo-desktop kernel: [ 34.192717] TCP reno registeredJul 23 13:34:10 paolo-desktop kernel: [ 34.203264] checking if image is initramfs... it isJul 23 13:34:10 paolo-desktop kernel: [ 34.766349] Freeing initrd memory: 7725k freedJul 23 13:34:10 paolo-desktop kernel: [ 34.767570] audit: initializing netlink socket (disabled)Jul 23 13:34:10 paolo-desktop kernel: [ 34.767584] audit(1216812821.448:1): initializedJul 23 13:34:10 paolo-desktop kernel: [ 34.767728] highmem bounce pool size: 64 pagesJul 23 13:34:10 paolo-desktop kernel: [ 34.769412] VFS: Disk quotas dquot_6.5.1Jul 23 13:34:10 paolo-desktop kernel: [ 34.769474] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)Jul 23 13:34:10 paolo-desktop kernel: [ 34.769578] io scheduler noop registeredJul 23 13:34:10 paolo-desktop kernel: [ 34.769580] io scheduler anticipatory registeredJul 23 13:34:10 paolo-desktop kernel: [ 34.769581] io scheduler deadline registeredJul 23 13:34:10 paolo-desktop kernel: [ 34.769589] io scheduler cfq registered (default)Jul 23 13:34:10 paolo-desktop kernel: [ 34.769600] pci 0000:00:00.0: Enabling HT MSI MappingJul 23 13:34:10 paolo-desktop kernel: [ 34.769627] pci 0000:00:02.0: Enabling HT MSI MappingJul 23 13:34:10 paolo-desktop kernel: [ 34.769634] pci 0000:00:03.0: Enabling HT MSI MappingJul 23 13:34:10 paolo-desktop kernel: [ 34.769642] pci 0000:00:04.0: Enabling HT MSI MappingJul 23 13:34:10 paolo-desktop kernel: [ 34.769663] pci 0000:00:09.0: Enabling HT MSI MappingJul 23 13:34:10 paolo-desktop kernel: [ 34.783994] pci 0000:00:0e.0: Enabling HT MSI MappingJul 23 13:34:10 paolo-desktop kernel: [ 34.784003] pci 0000:00:0f.0: Enabling HT MSI MappingJul 23 13:34:10 paolo-desktop kernel: [ 34.784011] pci 0000:00:10.0: Enabling HT MSI MappingJul 23 13:34:10 paolo-desktop kernel: [ 34.784022] pci 0000:00:10.1: Enabling HT MSI MappingJul 23 13:34:10 paolo-desktop kernel: [ 34.784038] Boot video device is 0000:03:00.0Jul 23 13:34:10 paolo-desktop kernel: [ 34.784131] PCI: Setting latency timer of device 0000:00:02.0 to 64Jul 23 13:34:10 paolo-desktop kernel: [ 34.784150] assign_interrupt_mode Found MSI capabilityJul 23 13:34:10 paolo-desktop kernel: [ 34.784167] Allocate Port Service[0000:00:02.0:pcie00]Jul 23 13:34:10 paolo-desktop kernel: [ 34.784227] PCI: Setting latency timer of device 0000:00:03.0 to 64Jul 23 13:34:10 paolo-desktop kernel: [ 34.784245] assign_interrupt_mode Found MSI capabilityJul 23 13:34:10 paolo-desktop kernel: [ 34.784258] Allocate Port Service[0000:00:03.0:pcie00]Jul 23 13:34:10 paolo-desktop kernel: [ 34.784313] PCI: Setting latency timer of device 0000:00:04.0 to 64Jul 23 13:34:10 paolo-desktop kernel: [ 34.784331] assign_interrupt_mode Found MSI capabilityJul 23 13:34:10 paolo-desktop kernel: [ 34.784344] Allocate Port Service[0000:00:04.0:pcie00]Jul 23 13:34:10 paolo-desktop kernel: [ 34.784548] isapnp: Scanning for PnP cards...Jul 23 13:34:10 paolo-desktop kernel: [ 35.137049] isapnp: No Plug & Play device foundJul 23 13:34:10 paolo-desktop kernel: [ 35.161713] Real Time Clock Driver v1.12acJul 23 13:34:10 paolo-desktop kernel: [ 35.161835] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabledJul 23 13:34:10 paolo-desktop kernel: [ 35.161958] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550AJul 23 13:34:10 paolo-desktop kernel: [ 35.162494] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550AJul 23 13:34:10 paolo-desktop kernel: [ 35.163226] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksizeJul 23 13:34:10 paolo-desktop kernel: [ 35.163282] input: Macintosh mouse button emulation as /devices/virtual/input/input0Jul 23 13:34:10 paolo-desktop kernel: [ 35.163366] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12Jul 23 13:34:10 paolo-desktop kernel: [ 35.163705] serio: i8042 KBD port at 0x60,0x64 irq 1Jul 23 13:34:10 paolo-desktop kernel: [ 35.163710] serio: i8042 AUX port at 0x60,0x64 irq 12Jul 23 13:34:10 paolo-desktop kernel: [ 35.183596] mice: PS/2 mouse device common for all miceJul 23 13:34:10 paolo-desktop kernel: [ 35.183713] EISA: Probing bus 0 at eisa.0Jul 23 13:34:10 paolo-desktop kernel: [ 35.183721] Cannot allocate resource for EISA slot 2Jul 23 13:34:10 paolo-desktop kernel: [ 35.183726] Cannot allocate resource for EISA slot 4Jul 23 13:34:10 paolo-desktop kernel: [ 35.183735] Cannot allocate resource for EISA slot 8Jul 23 13:34:10 paolo-desktop kernel: [ 35.183737] EISA: Detected 0 cards.Jul 23 13:34:10 paolo-desktop kernel: [ 35.183740] cpuidle: using governor ladderJul 23 13:34:10 paolo-desktop kernel: [ 35.183742] cpuidle: using governor menuJul 23 13:34:10 paolo-desktop kernel: [ 35.183819] NET: Registered protocol family 1Jul 23 13:34:10 paolo-desktop kernel: [ 35.183843] Using IPI No-Shortcut modeJul 23 13:34:10 paolo-desktop kernel: [ 35.183874] registered taskstats version 1Jul 23 13:34:10 paolo-desktop kernel: [ 35.183985] Magic number: 0:928:580Jul 23 13:34:10 paolo-desktop kernel: [ 35.184125] hash matches device PNP0C0F:23Jul 23 13:34:10 paolo-desktop kernel: [ 35.184146] BIOS EDD facility v0.16 2004-Jun-25, 0 devices foundJul 23 13:34:10 paolo-desktop kernel: [ 35.184148] EDD information not available.Jul 23 13:34:10 paolo-desktop kernel: [ 35.184389] Freeing unused kernel memory: 368k freedJul 23 13:34:10 paolo-desktop kernel: [ 35.199581] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1Jul 23 13:34:10 paolo-desktop kernel: [ 36.410344] fuse init (API version 7.9)Jul 23 13:34:10 paolo-desktop kernel: [ 36.425757] ACPI: Fan [FAN] (on)Jul 23 13:34:10 paolo-desktop kernel: [ 36.432439] ACPI: Thermal Zone [THRM] (40 C)Jul 23 13:34:10 paolo-desktop kernel: [ 36.942366] usbcore: registered new interface driver usbfsJul 23 13:34:10 paolo-desktop kernel: [ 36.942387] usbcore: registered new interface driver hubJul 23 13:34:10 paolo-desktop kernel: [ 36.952355] usbcore: registered new device driver usbJul 23 13:34:10 paolo-desktop kernel: [ 36.963185] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 23Jul 23 13:34:10 paolo-desktop kernel: [ 36.963196] ACPI: PCI Interrupt 0000:00:0b.1[B] -> Link [APCL] -> GSI 23 (level, low) -> IRQ 16Jul 23 13:34:10 paolo-desktop kernel: [ 36.963208] PCI: Setting latency timer of device 0000:00:0b.1 to 64Jul 23 13:34:10 paolo-desktop kernel: [ 36.963211] ehci_hcd 0000:00:0b.1: EHCI Host ControllerJul 23 13:34:10 paolo-desktop kernel: [ 36.963481] ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 1Jul 23 13:34:10 paolo-desktop kernel: [ 36.963509] ehci_hcd 0000:00:0b.1: debug port 1Jul 23 13:34:10 paolo-desktop kernel: [ 36.963513] PCI: cache line size of 64 is not supported by device 0000:00:0b.1Jul 23 13:34:10 paolo-desktop kernel: [ 36.963524] ehci_hcd 0000:00:0b.1: irq 16, io mem 0xfe02e000Jul 23 13:34:10 paolo-desktop kernel: [ 36.974600] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) DriverJul 23 13:34:10 paolo-desktop kernel: [ 36.976122] ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004Jul 23 13:34:10 paolo-desktop kernel: [ 36.976242] usb usb1: configuration #1 chosen from 1 choiceJul 23 13:34:10 paolo-desktop kernel: [ 36.976261] hub 1-0:1.0: USB hub foundJul 23 13:34:10 paolo-desktop kernel: [ 36.976267] hub 1-0:1.0: 8 ports detectedJul 23 13:34:10 paolo-desktop kernel: [ 37.033734] SCSI subsystem initializedJul 23 13:34:10 paolo-desktop kernel: [ 37.071681] libata version 3.00 loaded.Jul 23 13:34:10 paolo-desktop kernel: [ 37.076236] Floppy drive(s): fd0 is 1.44MJul 23 13:34:10 paolo-desktop kernel: [ 37.080583] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.Jul 23 13:34:10 paolo-desktop kernel: [ 37.080975] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22Jul 23 13:34:10 paolo-desktop kernel: [ 37.080985] ACPI: PCI Interrupt 0000:00:14.0[A] -> Link [APCH] -> GSI 22 (level, low) -> IRQ 17Jul 23 13:34:10 paolo-desktop kernel: [ 37.080991] PCI: Setting latency timer of device 0000:00:14.0 to 64Jul 23 13:34:10 paolo-desktop kernel: [ 37.093324] FDC 0 is a post-1991 82077Jul 23 13:34:10 paolo-desktop kernel: [ 37.601293] forcedeth 0000:00:14.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:17:31:90:a4:d8Jul 23 13:34:10 paolo-desktop kernel: [ 37.601299] forcedeth 0000:00:14.0: highdma pwrctl timirq gbit lnktim desc-v3Jul 23 13:34:10 paolo-desktop kernel: [ 37.601784] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 21Jul 23 13:34:10 paolo-desktop kernel: [ 37.601794] ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [APCF] -> GSI 21 (level, low) -> IRQ 18Jul 23 13:34:10 paolo-desktop kernel: [ 37.601805] PCI: Setting latency timer of device 0000:00:0b.0 to 64Jul 23 13:34:10 paolo-desktop kernel: [ 37.601808] ohci_hcd 0000:00:0b.0: OHCI Host ControllerJul 23 13:34:10 paolo-desktop kernel: [ 37.601836] ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2Jul 23 13:34:10 paolo-desktop kernel: [ 37.601853] ohci_hcd 0000:00:0b.0: irq 18, io mem 0xfe02f000Jul 23 13:34:10 paolo-desktop kernel: [ 37.657910] usb usb2: configuration #1 chosen from 1 choiceJul 23 13:34:10 paolo-desktop kernel: [ 37.657929] hub 2-0:1.0: USB hub foundJul 23 13:34:10 paolo-desktop kernel: [ 37.657936] hub 2-0:1.0: 8 ports detectedJul 23 13:34:10 paolo-desktop kernel: [ 37.759890] sata_nv 0000:00:0e.0: version 3.5Jul 23 13:34:10 paolo-desktop kernel: [ 37.760243] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 20Jul 23 13:34:10 paolo-desktop kernel: [ 37.760252] ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [APSI] -> GSI 20 (level, low) -> IRQ 19Jul 23 13:34:10 paolo-desktop kernel: [ 37.760291] PCI: Setting latency timer of device 0000:00:0e.0 to 64Jul 23 13:34:10 paolo-desktop kernel: [ 37.760553] scsi0 : sata_nvJul 23 13:34:10 paolo-desktop kernel: [ 37.760596] scsi1 : sata_nvJul 23 13:34:10 paolo-desktop kernel: [ 37.760751] ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xe000 irq 19Jul 23 13:34:10 paolo-desktop kernel: [ 37.760754] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xe008 irq 19Jul 23 13:34:10 paolo-desktop kernel: [ 38.062929] usb 2-4: new full speed USB device using ohci_hcd and address 2Jul 23 13:34:10 paolo-desktop kernel: [ 38.071375] ata1: SATA link down (SStatus 0 SControl 300)Jul 23 13:34:10 paolo-desktop kernel: [ 38.276288] usb 2-4: configuration #1 chosen from 1 choiceJul 23 13:34:10 paolo-desktop kernel: [ 38.392018] ata2: SATA link down (SStatus 0 SControl 300)Jul 23 13:34:10 paolo-desktop kernel: [ 38.402827] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 23Jul 23 13:34:10 paolo-desktop kernel: [ 38.402830] ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [APSJ] -> GSI 23 (level, low) -> IRQ 16Jul 23 13:34:10 paolo-desktop kernel: [ 38.402870] PCI: Setting latency timer of device 0000:00:0f.0 to 64Jul 23 13:34:10 paolo-desktop kernel: [ 38.402923] scsi2 : sata_nvJul 23 13:34:10 paolo-desktop kernel: [ 38.403155] scsi3 : sata_nvJul 23 13:34:10 paolo-desktop kernel: [ 38.403296] ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xcc00 irq 16Jul 23 13:34:10 paolo-desktop kernel: [ 38.403299] ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xcc08 irq 16Jul 23 13:34:10 paolo-desktop kernel: [ 38.714670] ata3: SATA link down (SStatus 0 SControl 300)Jul 23 13:34:10 paolo-desktop kernel: [ 39.034314] ata4: SATA link down (SStatus 0 SControl 300)Jul 23 13:34:10 paolo-desktop kernel: [ 39.045873] PCI: Setting latency timer of device 0000:00:0d.0 to 64Jul 23 13:34:10 paolo-desktop kernel: [ 39.050363] pata_amd 0000:00:0d.0: version 0.3.10Jul 23 13:34:10 paolo-desktop kernel: [ 39.050402] PCI: Setting latency timer of device 0000:00:0d.0 to 64Jul 23 13:34:10 paolo-desktop kernel: [ 39.051848] scsi4 : pata_amdJul 23 13:34:10 paolo-desktop kernel: [ 39.051896] scsi5 : pata_amdJul 23 13:34:10 paolo-desktop kernel: [ 39.052484] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf400 irq 14Jul 23 13:34:10 paolo-desktop kernel: [ 39.052486] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf408 irq 15Jul 23 13:34:10 paolo-desktop kernel: [ 39.216926] ata5.00: ATA-7: Maxtor 6L080P0, BAJ41G20, max UDMA/133Jul 23 13:34:10 paolo-desktop kernel: [ 39.216929] ata5.00: 160086528 sectors, multi 1: LBA Jul 23 13:34:10 paolo-desktop kernel: [ 39.231854] ata5.00: configured for UDMA/133Jul 23 13:34:10 paolo-desktop kernel: [ 39.550036] ata6.00: ATAPI: HL-DT-ST DVDRAM GSA-H10N, JL10, max UDMA/33Jul 23 13:34:10 paolo-desktop kernel: [ 39.721788] ata6.00: configured for UDMA/33Jul 23 13:34:10 paolo-desktop kernel: [ 39.721878] scsi 4:0:0:0: Direct-Access ATA Maxtor 6L080P0 BAJ4 PQ: 0 ANSI: 5Jul 23 13:34:10 paolo-desktop kernel: [ 39.725711] scsi 5:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-H10N JL10 PQ: 0 ANSI: 5Jul 23 13:34:10 paolo-desktop kernel: [ 39.731792] Driver 'sd' needs updating - please use bus_type methodsJul 23 13:34:10 paolo-desktop kernel: [ 39.731881] sd 4:0:0:0: [sda] 160086528 512-byte hardware sectors (81964 MB)Jul 23 13:34:10 paolo-desktop kernel: [ 39.731892] sd 4:0:0:0: [sda] Write Protect is offJul 23 13:34:10 paolo-desktop kernel: [ 39.731894] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00Jul 23 13:34:10 paolo-desktop kernel: [ 39.731909] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUAJul 23 13:34:10 paolo-desktop kernel: [ 39.731957] sd 4:0:0:0: [sda] 160086528 512-byte hardware sectors (81964 MB)Jul 23 13:34:10 paolo-desktop kernel: [ 39.731964] sd 4:0:0:0: [sda] Write Protect is offJul 23 13:34:10 paolo-desktop kernel: [ 39.731965] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00Jul 23 13:34:10 paolo-desktop kernel: [ 39.731976] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUAJul 23 13:34:10 paolo-desktop kernel: [ 39.731979] sda:<4>Driver 'sr' needs updating - please use bus_type methodsJul 23 13:34:10 paolo-desktop kernel: [ 39.755489] sda1 sda2 < sda5 >Jul 23 13:34:10 paolo-desktop kernel: [ 39.772833] sd 4:0:0:0: [sda] Attached SCSI diskJul 23 13:34:10 paolo-desktop kernel: [ 39.776760] sd 4:0:0:0: Attached scsi generic sg0 type 0Jul 23 13:34:10 paolo-desktop kernel: [ 39.776775] sr 5:0:0:0: Attached scsi generic sg1 type 5Jul 23 13:34:10 paolo-desktop kernel: [ 39.794197] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda trayJul 23 13:34:10 paolo-desktop kernel: [ 39.794202] Uniform CD-ROM driver Revision: 3.20Jul 23 13:34:10 paolo-desktop kernel: [ 39.794252] sr 5:0:0:0: Attached scsi CD-ROM sr0Jul 23 13:34:10 paolo-desktop kernel: [ 39.971687] Attempting manual resumeJul 23 13:34:10 paolo-desktop kernel: [ 39.971690] swsusp: Resume From Partition 8:5Jul 23 13:34:10 paolo-desktop kernel: [ 39.971692] PM: Checking swsusp image.Jul 23 13:34:10 paolo-desktop kernel: [ 39.971838] PM: Resume from disk failed.Jul 23 13:34:10 paolo-desktop kernel: [ 39.992511] kjournald starting. Commit interval 5 secondsJul 23 13:34:10 paolo-desktop kernel: [ 39.992529] EXT3-fs: mounted filesystem with ordered data mode.Jul 23 13:34:10 paolo-desktop kernel: [ 46.775170] ip_tables: (C) 2000-2006 Netfilter Core TeamJul 23 13:34:10 paolo-desktop kernel: [ 46.807023] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)Jul 23 13:34:10 paolo-desktop kernel: [ 47.370507] pci_hotplug: PCI Hot Plug PCI Core version: 0.5Jul 23 13:34:10 paolo-desktop kernel: [ 47.410328] input: Power Button (FF) as /devices/virtual/input/input2Jul 23 13:34:10 paolo-desktop kernel: [ 47.432668] ACPI: Power Button (FF) [PWRF]Jul 23 13:34:10 paolo-desktop kernel: [ 47.432751] input: Power Button (CM) as /devices/virtual/input/input3Jul 23 13:34:10 paolo-desktop kernel: [ 47.444370] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4Jul 23 13:34:10 paolo-desktop kernel: [ 47.464627] ACPI: Power Button (CM) [PWRB]Jul 23 13:34:10 paolo-desktop kernel: [ 48.689695] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x4c00Jul 23 13:34:10 paolo-desktop kernel: [ 48.689731] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x4c40Jul 23 13:34:10 paolo-desktop kernel: [ 48.728454] Linux agpgart interface v0.102Jul 23 13:34:10 paolo-desktop kernel: [ 48.984171] nvidia: module license 'NVIDIA' taints kernel.Jul 23 13:34:10 paolo-desktop kernel: [ 49.412811] Linux video capture interface: v2.00Jul 23 13:34:10 paolo-desktop kernel: [ 49.494663] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: USB GSPCA camera found. (PAC207)Jul 23 13:34:10 paolo-desktop kernel: [ 49.505575] usbcore: registered new interface driver gspcaJul 23 13:34:10 paolo-desktop kernel: [ 49.505581] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: gspca driver 01.00.20 registeredJul 23 13:34:10 paolo-desktop kernel: [ 49.597523] ACPI: PCI Interrupt Link [APC5] enabled at IRQ 16Jul 23 13:34:10 paolo-desktop kernel: [ 49.597535] ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [APC5] -> GSI 16 (level, low) -> IRQ 20Jul 23 13:34:10 paolo-desktop kernel: [ 49.597542] PCI: Setting latency timer of device 0000:03:00.0 to 64Jul 23 13:34:10 paolo-desktop kernel: [ 49.597745] NVRM: loading NVIDIA UNIX x86 Kernel Module 169.12 Thu Feb 14 17:53:07 PST 2008Jul 23 13:34:10 paolo-desktop kernel: [ 49.599249] input: PC Speaker as /devices/platform/pcspkr/input/input4Jul 23 13:34:10 paolo-desktop kernel: [ 49.848022] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 22Jul 23 13:34:10 paolo-desktop kernel: [ 49.848028] ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [AAZA] -> GSI 22 (level, low) -> IRQ 17Jul 23 13:34:10 paolo-desktop kernel: [ 49.848051] PCI: Setting latency timer of device 0000:00:10.1 to 64Jul 23 13:34:10 paolo-desktop kernel: [ 50.329848] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input5Jul 23 13:34:10 paolo-desktop kernel: [ 50.357709] parport_pc 00:09: reported by Plug and Play ACPIJul 23 13:34:10 paolo-desktop kernel: [ 50.357739] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]Jul 23 13:34:10 paolo-desktop kernel: [ 51.617103] lp0: using parport0 (interrupt-driven).Jul 23 13:34:10 paolo-desktop kernel: [ 51.674730] Adding 3020180k swap on /dev/sda5. Priority:-1 extents:1 across:3020180kJul 23 13:34:10 paolo-desktop kernel: [ 52.232840] EXT3 FS on sda1, internal journalJul 23 13:34:10 paolo-desktop kernel: [ 52.369680] device-mapper: uevent: version 1.0.3Jul 23 13:34:10 paolo-desktop kernel: [ 52.369709] device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.comJul 23 13:34:10 paolo-desktop kernel: [ 61.683610] No dock devices found.Jul 23 13:34:10 paolo-desktop kernel: [ 62.033676] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ processors (2 cpu cores) (version 2.20.00)Jul 23 13:34:10 paolo-desktop kernel: [ 62.033287] powernow-k8: MP systems not supported by PSB BIOS structureJul 23 13:34:10 paolo-desktop kernel: [ 62.033718] powernow-k8: MP systems not supported by PSB BIOS structureJul 23 13:34:13 paolo-desktop kernel: [ 66.281231] NET: Registered protocol family 10Jul 23 13:34:13 paolo-desktop kernel: [ 66.281501] lo: Disabled Privacy ExtensionsJul 23 13:34:18 paolo-desktop kernel: [ 70.971179] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)Jul 23 13:34:18 paolo-desktop kernel: [ 70.971184] apm: disabled - APM is not SMP safe.Jul 23 13:34:18 paolo-desktop kernel: [ 71.130938] ppdev: user-space parallel port driverJul 23 13:34:18 paolo-desktop kernel: [ 71.226814] audit(1216812858.742:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=6510 profile="/usr/sbin/cupsd" namespace="default"Jul 23 13:34:28 paolo-desktop kernel: [ 81.372518] Bluetooth: Core ver 2.11Jul 23 13:34:28 paolo-desktop kernel: [ 81.372606] NET: Registered protocol family 31Jul 23 13:34:28 paolo-desktop kernel: [ 81.372608] Bluetooth: HCI device and connection manager initializedJul 23 13:34:28 paolo-desktop kernel: [ 81.372614] Bluetooth: HCI socket layer initializedJul 23 13:34:28 paolo-desktop kernel: [ 81.392921] Bluetooth: L2CAP ver 2.9Jul 23 13:34:28 paolo-desktop kernel: [ 81.392927] Bluetooth: L2CAP socket layer initializedJul 23 13:34:28 paolo-desktop kernel: [ 81.428432] Bluetooth: RFCOMM socket layer initializedJul 23 13:34:28 paolo-desktop kernel: [ 81.428453] Bluetooth: RFCOMM TTY layer initializedJul 23 13:34:28 paolo-desktop kernel: [ 81.428455] Bluetooth: RFCOMM ver 1.8Jul 23 13:34:33 paolo-desktop kernel: [ 85.772760] NET: Registered protocol family 17Jul 23 13:34:34 paolo-desktop kernel: [ 87.039910] lirc_dev: IR Remote Control driver registered, at major 61 Jul 23 13:34:34 paolo-desktop kernel: [ 87.142249] bttv: driver version 0.9.17 loadedJul 23 13:34:34 paolo-desktop kernel: [ 87.142257] bttv: using 8 buffers with 2080k (520 pages) each for captureJul 23 13:34:34 paolo-desktop kernel: [ 87.215562] ivtv: Start initialization, version 1.1.0Jul 23 13:34:34 paolo-desktop kernel: [ 87.215606] ivtv: End initializationJul 23 13:34:34 paolo-desktop kernel: [ 87.407536] cx88/0: cx2388x v4l2 driver version 0.0.6 loadedJul 23 13:34:46 paolo-desktop kernel: [ 98.732805] eth0: no IPv6 routers present