rendered paste bodysmartctl version 5.37 [x86_64-unknown-linux-gnu] Copyright (C) 2002-6 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Model Family: Maxtor DiamondMax Plus 40 series (Ultra ATA 66 and Ultra ATA 100)
Device Model: Maxtor 51024H2
Serial Number: K21AT54C
Firmware Version: DAC10SC0
User Capacity: 10,239,860,736 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 6
ATA Standard is: ATA/ATAPI-6 T13 1410D revision 0
Local Time is: Sat Jul 19 18:22:59 2008 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x1b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
No Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 9) minutes.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000a 253 252 000 Old_age Always - 412317346716
3 Spin_Up_Time 0x0027 231 231 063 Pre-fail Always - 91
4 Start_Stop_Count 0x0032 253 253 000 Old_age Always - 1125
5 Reallocated_Sector_Ct 0x0033 253 253 063 Pre-fail Always - 0
6 Read_Channel_Margin 0x0001 253 253 100 Pre-fail Offline - 0
7 Seek_Error_Rate 0x000a 253 252 000 Old_age Always - 72814
8 Seek_Time_Performance 0x0027 253 244 187 Pre-fail Always - 144542829434268
9 Power_On_Minutes 0x0032 206 206 000 Old_age Always - 16414h+47m
10 Spin_Retry_Count 0x002b 252 252 223 Pre-fail Always - 4294967378
11 Calibration_Retry_Count 0x002b 253 252 223 Pre-fail Always - 70
12 Power_Cycle_Count 0x0032 252 252 000 Old_age Always - 604
196 Reallocated_Event_Count 0x0008 253 253 000 Old_age Offline - 0
197 Current_Pending_Sector 0x0008 253 253 000 Old_age Offline - 0
198 Offline_Uncorrectable 0x0008 253 253 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0008 193 181 000 Old_age Offline - 85899373189
200 Multi_Zone_Error_Rate 0x000a 253 252 000 Old_age Always - 342668
201 Soft_Read_Error_Rate 0x000a 253 223 000 Old_age Always - 85899832220
202 TA_Increase_Count 0x000a 253 252 000 Old_age Always - 486300
203 Run_Out_Cancel 0x000b 253 252 180 Pre-fail Always - 486300
204 Shock_Count_Write_Opern 0x000a 253 252 000 Old_age Always - 486300
205 Shock_Rate_Write_Opern 0x000a 253 252 000 Old_age Always - 486300
207 Spin_High_Current 0x002a 252 252 000 Old_age Always - 4294967378
208 Spin_Buzz 0x002a 253 252 000 Old_age Always - 82
209 Offline_Seek_Performnce 0x0024 253 253 000 Old_age Offline - 0
96 Unknown_Attribute 0x0004 253 253 000 Old_age Offline - 0
97 Unknown_Attribute 0x0004 253 253 000 Old_age Offline - 0
98 Unknown_Attribute 0x0004 253 253 000 Old_age Offline - 0
99 Unknown_Attribute 0x0004 253 253 000 Old_age Offline - 0
100 Unknown_Attribute 0x0004 253 253 000 Old_age Offline - 0
101 Unknown_Attribute 0x0004 253 253 000 Old_age Offline - 0
SMART Error Log Version: 1
Warning: ATA error count 2052 inconsistent with error log pointer 5
ATA Error Count: 2052 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 2052 occurred at disk power-on lifetime: 15388 hours (641 days + 4 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 00 00 00 00 f0 Error: ICRC, ABRT at LBA = 0x00000000 = 0
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 00 00 00 f0 08 00:35:57.408 READ DMA
f8 00 00 01 00 00 f0 08 00:35:57.392 READ NATIVE MAX ADDRESS
ec 00 00 01 00 00 b0 0a 00:35:57.392 IDENTIFY DEVICE
ef 03 45 00 00 00 b0 0a 00:35:57.376 SET FEATURES [Set transfer mode]
f8 00 00 01 00 00 f0 08 00:35:57.360 READ NATIVE MAX ADDRESS
Error 2051 occurred at disk power-on lifetime: 15388 hours (641 days + 4 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 00 00 00 00 f0 Error: ICRC, ABRT at LBA = 0x00000000 = 0
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 00 00 00 f0 08 00:35:57.216 READ DMA
f8 00 00 01 00 00 f0 08 00:35:57.200 READ NATIVE MAX ADDRESS
ec 00 00 01 00 00 b0 0a 00:35:57.200 IDENTIFY DEVICE
ef 03 45 00 00 00 b0 0a 00:35:57.200 SET FEATURES [Set transfer mode]
f8 00 00 01 00 00 f0 08 00:35:57.168 READ NATIVE MAX ADDRESS
Error 2050 occurred at disk power-on lifetime: 15388 hours (641 days + 4 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 00 00 00 00 f0 Error: ICRC, ABRT at LBA = 0x00000000 = 0
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 00 00 00 f0 08 00:35:57.024 READ DMA
f8 00 00 01 00 00 f0 08 00:35:57.008 READ NATIVE MAX ADDRESS
ec 00 00 01 00 00 b0 0a 00:35:57.008 IDENTIFY DEVICE
ef 03 45 00 00 00 b0 0a 00:35:57.008 SET FEATURES [Set transfer mode]
f8 00 00 01 00 00 f0 08 00:35:56.976 READ NATIVE MAX ADDRESS
Error 2049 occurred at disk power-on lifetime: 15388 hours (641 days + 4 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 00 00 00 00 f0 Error: ICRC, ABRT at LBA = 0x00000000 = 0
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 00 00 00 f0 08 00:35:56.832 READ DMA
f8 00 00 01 00 00 f0 08 00:35:56.816 READ NATIVE MAX ADDRESS
ec 00 00 01 00 00 b0 0a 00:35:56.800 IDENTIFY DEVICE
ef 03 45 00 00 00 b0 0a 00:35:56.800 SET FEATURES [Set transfer mode]
f8 00 00 01 00 00 f0 08 00:35:56.784 READ NATIVE MAX ADDRESS
Error 2048 occurred at disk power-on lifetime: 15388 hours (641 days + 4 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 00 00 00 00 f0 Error: ICRC, ABRT at LBA = 0x00000000 = 0
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 00 00 00 f0 08 00:32:41.280 READ DMA
f8 00 00 01 00 00 f0 08 00:32:41.264 READ NATIVE MAX ADDRESS
ec 00 00 01 00 00 b0 0a 00:32:41.264 IDENTIFY DEVICE
ef 03 45 00 00 00 b0 0a 00:32:41.248 SET FEATURES [Set transfer mode]
f8 00 00 01 00 00 f0 08 00:32:41.232 READ NATIVE MAX ADDRESS
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
Device does not support Selective Self Tests/Logging