rendered paste bodydaemon:Jul 10 02:17:12 ripley-desktop dhclient: DHCPREQUEST of <null address> on eth0 to 192.168.0.1 port 67Jul 10 02:17:13 ripley-desktop dhclient: DHCPACK of 192.168.0.10 from 192.168.0.1Jul 10 02:17:13 ripley-desktop dhclient: bound to 192.168.0.10 -- renewal in 1555 seconds.Jul 10 02:17:13 ripley-desktop NetworkManager: <info> DHCP daemon state is now 3 (renew) for interface eth0 Jul 10 02:43:08 ripley-desktop dhclient: DHCPREQUEST of <null address> on eth0 to 192.168.0.1 port 67Jul 10 02:43:09 ripley-desktop dhclient: DHCPACK of 192.168.0.10 from 192.168.0.1Jul 10 02:43:09 ripley-desktop dhclient: bound to 192.168.0.10 -- renewal in 1353 seconds.Jul 10 02:43:09 ripley-desktop NetworkManager: <info> DHCP daemon state is now 3 (renew) for interface eth0 Jul 10 03:05:42 ripley-desktop dhclient: DHCPREQUEST of <null address> on eth0 to 192.168.0.1 port 67Jul 10 03:05:43 ripley-desktop dhclient: DHCPACK of 192.168.0.10 from 192.168.0.1Jul 10 03:05:43 ripley-desktop dhclient: bound to 192.168.0.10 -- renewal in 1610 seconds.Jul 10 03:05:43 ripley-desktop NetworkManager: <info> DHCP daemon state is now 3 (renew) for interface eth0 Jul 10 03:32:33 ripley-desktop dhclient: DHCPREQUEST of <null address> on eth0 to 192.168.0.1 port 67Jul 10 03:32:34 ripley-desktop dhclient: DHCPACK of 192.168.0.10 from 192.168.0.1Jul 10 03:32:34 ripley-desktop NetworkManager: <info> DHCP daemon state is now 3 (renew) for interface eth0 Jul 10 03:32:34 ripley-desktop dhclient: bound to 192.168.0.10 -- renewal in 1721 seconds.Jul 10 04:01:15 ripley-desktop dhclient: DHCPREQUEST of <null address> on eth0 to 192.168.0.1 port 67Jul 10 04:01:16 ripley-desktop dhclient: DHCPACK of 192.168.0.10 from 192.168.0.1Jul 10 04:01:16 ripley-desktop NetworkManager: <info> DHCP daemon state is now 3 (renew) for interface eth0 Jul 10 04:01:16 ripley-desktop dhclient: bound to 192.168.0.10 -- renewal in 1433 seconds.Jul 10 04:25:09 ripley-desktop dhclient: DHCPREQUEST of <null address> on eth0 to 192.168.0.1 port 67Jul 10 04:25:09 ripley-desktop dhclient: DHCPACK of 192.168.0.10 from 192.168.0.1Jul 10 04:25:10 ripley-desktop dhclient: bound to 192.168.0.10 -- renewal in 1745 seconds.Jul 10 04:25:10 ripley-desktop NetworkManager: <info> DHCP daemon state is now 3 (renew) for interface eth0 Jul 10 04:54:15 ripley-desktop dhclient: DHCPREQUEST of <null address> on eth0 to 192.168.0.1 port 67Jul 10 04:54:16 ripley-desktop dhclient: DHCPACK of 192.168.0.10 from 192.168.0.1Jul 10 04:54:16 ripley-desktop dhclient: bound to 192.168.0.10 -- renewal in 1358 seconds.Jul 10 04:54:16 ripley-desktop NetworkManager: <info> DHCP daemon state is now 3 (renew) for interface eth0 Jul 10 05:16:54 ripley-desktop dhclient: DHCPREQUEST of <null address> on eth0 to 192.168.0.1 port 67Jul 10 05:16:54 ripley-desktop dhclient: DHCPACK of 192.168.0.10 from 192.168.0.1Jul 10 05:16:55 ripley-desktop dhclient: bound to 192.168.0.10 -- renewal in 1504 seconds.Jul 10 05:16:55 ripley-desktop NetworkManager: <info> DHCP daemon state is now 3 (renew) for interface eth0 Jul 10 05:41:59 ripley-desktop dhclient: DHCPREQUEST of <null address> on eth0 to 192.168.0.1 port 67Jul 10 05:42:00 ripley-desktop dhclient: DHCPACK of 192.168.0.10 from 192.168.0.1Jul 10 05:42:00 ripley-desktop dhclient: bound to 192.168.0.10 -- renewal in 1664 seconds.Jul 10 05:42:00 ripley-desktop NetworkManager: <info> DHCP daemon state is now 3 (renew) for interface eth0 Jul 10 06:09:44 ripley-desktop dhclient: DHCPREQUEST of <null address> on eth0 to 192.168.0.1 port 67Jul 10 06:09:45 ripley-desktop dhclient: DHCPACK of 192.168.0.10 from 192.168.0.1Jul 10 06:09:45 ripley-desktop dhclient: bound to 192.168.0.10 -- renewal in 1467 seconds.Jul 10 06:09:45 ripley-desktop NetworkManager: <info> DHCP daemon state is now 3 (renew) for interface eth0 Jul 10 06:28:58 ripley-desktop console-kit-daemon[5814]: WARNING: Unable to activate console: No such device or address Jul 10 06:28:58 ripley-desktop init: tty4 main process (5056) killed by TERM signalJul 10 06:28:58 ripley-desktop init: tty5 main process (5057) killed by TERM signalJul 10 06:28:58 ripley-desktop init: rc2 main process (5058) killed by TERM signalJul 10 06:28:58 ripley-desktop init: tty2 main process (5059) killed by TERM signalJul 10 06:28:58 ripley-desktop init: tty3 main process (5061) killed by TERM signalJul 10 06:28:58 ripley-desktop init: tty6 main process (5063) killed by TERM signalJul 10 06:28:59 ripley-desktop scim-bridge: Failed to open the panel socketJul 10 06:29:00 ripley-desktop gdm[6025]: GLib-CRITICAL: g_hash_table_lookup_extended: assertion `hash_table != NULL' failed Jul 10 06:29:00 ripley-desktop gdm[6025]: WARNING: Request for invalid configuration key xdmcp/Enable=false Jul 10 06:29:00 ripley-desktop avahi-daemon[5541]: Got SIGTERM, quitting.Jul 10 06:29:00 ripley-desktop avahi-daemon[5541]: Leaving mDNS multicast group on interface eth0.IPv4 with address 192.168.0.10.Jul 10 06:29:00 ripley-desktop scim-bridge: Failed to open the panel socketJul 10 06:29:01 ripley-desktop scim-bridge: Failed to open the panel socketJul 10 06:29:01 ripley-desktop scim-bridge: Cleanup, done. Exitting...Jul 10 06:29:03 ripley-desktop amd[6042]: ignoring timeout request for active node /netJul 10 06:29:03 ripley-desktop amd[6042]: WARNING: automounter going down on signal 15Jul 11 01:23:46 ripley-desktop NetworkManager: <info> starting... Jul 11 01:23:47 ripley-desktop avahi-daemon[5726]: Found user 'avahi' (UID 109) and group 'avahi' (GID 120).Jul 11 01:23:47 ripley-desktop avahi-daemon[5726]: Successfully dropped root privileges.Jul 11 01:23:47 ripley-desktop avahi-daemon[5726]: avahi-daemon 0.6.22 starting up.Jul 11 01:23:47 ripley-desktop avahi-daemon[5726]: Successfully called chroot().Jul 11 01:23:47 ripley-desktop avahi-daemon[5726]: Successfully dropped remaining capabilities.Jul 11 01:23:47 ripley-desktop avahi-daemon[5726]: No service file found in /etc/avahi/services.Jul 11 01:23:47 ripley-desktop avahi-daemon[5726]: Network interface enumeration completed.Jul 11 01:23:47 ripley-desktop avahi-daemon[5726]: Registering HINFO record with values 'I686'/'LINUX'.Jul 11 01:23:47 ripley-desktop avahi-daemon[5726]: Server startup complete. Host name is ripley-desktop.local. Local service cookie is 2484560873.Jul 11 01:24:22 ripley-desktop NetworkManager: <info> eth0: Device is fully-supported using driver '8139too'. Jul 11 01:24:22 ripley-desktop NetworkManager: <info> nm_device_init(): waiting for device's worker thread to start Jul 11 01:24:22 ripley-desktop NetworkManager: <info> nm_device_init(): device's worker thread started, continuing. Jul 11 01:24:22 ripley-desktop NetworkManager: <info> Now managing wired Ethernet (802.3) device 'eth0'. Jul 11 01:24:22 ripley-desktop NetworkManager: <info> Deactivating device eth0. Jul 11 01:24:22 ripley-desktop NetworkManager: <info> Will activate wired connection 'eth0' because it now has a link. Jul 11 01:24:22 ripley-desktop NetworkManager: <debug> [1215732262.855295] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/storage_model_DVD_ROM_TS_H352C'). Jul 11 01:24:22 ripley-desktop NetworkManager: <info> SWITCH: no current connection, found better connection 'eth0'. Jul 11 01:24:22 ripley-desktop hcid[6160]: Bluetooth HCI daemonJul 11 01:24:22 ripley-desktop hcid[6160]: Starting SDP serverJul 11 01:24:22 ripley-desktop hcid[6160]: Created local server at unix:abstract=/var/run/dbus-JTbWgwpPcB,guid=7ba0b0a9bc6c74d7f78b97f648769a26Jul 11 01:24:23 ripley-desktop audio[6178]: Bluetooth Audio daemonJul 11 01:24:23 ripley-desktop audio[6178]: Unix socket created: 5Jul 11 01:24:23 ripley-desktop audio[6178]: audio.conf: Key file does not have key 'Enable'Jul 11 01:24:23 ripley-desktop audio[6178]: audio.conf: Key file does not have key 'Disable'Jul 11 01:24:23 ripley-desktop audio[6178]: add_service_record: got record id 0x10000Jul 11 01:24:23 ripley-desktop audio[6178]: audio.conf: Key file does not have key 'Disable'Jul 11 01:24:23 ripley-desktop audio[6178]: audio.conf: Key file does not have group 'A2DP'Jul 11 01:24:23 ripley-desktop last message repeated 3 timesJul 11 01:24:23 ripley-desktop audio[6178]: SEP 0x806d648 registered: type:0 codec:0 seid:1Jul 11 01:24:23 ripley-desktop audio[6178]: add_service_record: got record id 0x10001Jul 11 01:24:23 ripley-desktop audio[6178]: add_service_record: got record id 0x10002Jul 11 01:24:23 ripley-desktop audio[6178]: add_service_record: got record id 0x10003Jul 11 01:24:23 ripley-desktop audio[6178]: Registered manager path:/org/bluez/audioJul 11 01:24:23 ripley-desktop input[6182]: Bluetooth Input daemonJul 11 01:24:23 ripley-desktop input[6182]: Registered input manager path:/org/bluez/inputJul 11 01:24:23 ripley-desktop NetworkManager: <info> Will activate connection 'eth0'. Jul 11 01:24:23 ripley-desktop NetworkManager: <info> Device eth0 activation scheduled... Jul 11 01:24:23 ripley-desktop NetworkManager: <debug> [1215732263.865121] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/platform_bluetooth'). Jul 11 01:24:23 ripley-desktop NetworkManager: <info> Activation (eth0) started... Jul 11 01:24:23 ripley-desktop NetworkManager: <info> Activation (eth0) Stage 1 of 5 (Device Prepare) scheduled... Jul 11 01:24:23 ripley-desktop NetworkManager: <info> Activation (eth0) Stage 1 of 5 (Device Prepare) started... Jul 11 01:24:23 ripley-desktop NetworkManager: <info> Activation (eth0) Stage 2 of 5 (Device Configure) scheduled... Jul 11 01:24:23 ripley-desktop NetworkManager: <info> Activation (eth0) Stage 1 of 5 (Device Prepare) complete. Jul 11 01:24:23 ripley-desktop NetworkManager: <info> Activation (eth0) Stage 2 of 5 (Device Configure) starting... Jul 11 01:24:23 ripley-desktop NetworkManager: <info> Activation (eth0) Stage 2 of 5 (Device Configure) successful. Jul 11 01:24:23 ripley-desktop NetworkManager: <info> Activation (eth0) Stage 3 of 5 (IP Configure Start) scheduled. Jul 11 01:24:23 ripley-desktop NetworkManager: <info> Activation (eth0) Stage 2 of 5 (Device Configure) complete. Jul 11 01:24:23 ripley-desktop NetworkManager: <info> Activation (eth0) Stage 3 of 5 (IP Configure Start) started... Jul 11 01:24:24 ripley-desktop amd[6227]: Unable to parse hostport (null) for ldap map /usr/share/am-utils/amd.netJul 11 01:24:24 ripley-desktop NetworkManager: <info> Activation (eth0) Beginning DHCP transaction. Jul 11 01:24:24 ripley-desktop NetworkManager: <info> Activation (eth0) Stage 3 of 5 (IP Configure Start) complete. Jul 11 01:24:24 ripley-desktop NetworkManager: <info> DHCP daemon state is now 12 (successfully started) for interface eth0 Jul 11 01:24:26 ripley-desktop NetworkManager: <info> DHCP daemon state is now 1 (starting) for interface eth0 Jul 11 01:24:30 ripley-desktop dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 4Jul 11 01:24:30 ripley-desktop dhclient: DHCPOFFER of 192.168.0.10 from 192.168.0.1Jul 11 01:24:30 ripley-desktop dhclient: DHCPREQUEST of 192.168.0.10 on eth0 to 255.255.255.255 port 67Jul 11 01:24:31 ripley-desktop dhclient: DHCPACK of 192.168.0.10 from 192.168.0.1Jul 11 01:24:31 ripley-desktop avahi-daemon[5726]: Joining mDNS multicast group on interface eth0.IPv4 with address 192.168.0.10.Jul 11 01:24:31 ripley-desktop avahi-daemon[5726]: New relevant interface eth0.IPv4 for mDNS.Jul 11 01:24:31 ripley-desktop avahi-daemon[5726]: Registering new address record for 192.168.0.10 on eth0.IPv4.Jul 11 01:24:31 ripley-desktop NetworkManager: <info> DHCP daemon state is now 2 (bound) for interface eth0 Jul 11 01:24:31 ripley-desktop NetworkManager: <info> Activation (eth0) Stage 4 of 5 (IP Configure Get) scheduled... Jul 11 01:24:31 ripley-desktop NetworkManager: <info> Activation (eth0) Stage 4 of 5 (IP Configure Get) started... Jul 11 01:24:31 ripley-desktop dhclient: bound to 192.168.0.10 -- renewal in 1770 seconds.Jul 11 01:24:32 ripley-desktop NetworkManager: <info> Retrieved the following IP4 configuration from the DHCP daemon: Jul 11 01:24:32 ripley-desktop NetworkManager: <info> address 192.168.0.10 Jul 11 01:24:32 ripley-desktop NetworkManager: <info> netmask 255.255.255.0 Jul 11 01:24:32 ripley-desktop NetworkManager: <info> broadcast 192.168.0.255 Jul 11 01:24:32 ripley-desktop NetworkManager: <info> gateway 192.168.0.1 Jul 11 01:24:32 ripley-desktop NetworkManager: <info> nameserver 62.42.230.24 Jul 11 01:24:32 ripley-desktop NetworkManager: <info> nameserver 62.42.63.52 Jul 11 01:24:32 ripley-desktop NetworkManager: <info> Activation (eth0) Stage 5 of 5 (IP Configure Commit) scheduled... Jul 11 01:24:32 ripley-desktop NetworkManager: <info> Activation (eth0) Stage 4 of 5 (IP Configure Get) complete. Jul 11 01:24:32 ripley-desktop NetworkManager: <info> Activation (eth0) Stage 5 of 5 (IP Configure Commit) started... Jul 11 01:24:32 ripley-desktop avahi-daemon[5726]: Withdrawing address record for 192.168.0.10 on eth0.Jul 11 01:24:32 ripley-desktop avahi-daemon[5726]: Leaving mDNS multicast group on interface eth0.IPv4 with address 192.168.0.10.Jul 11 01:24:32 ripley-desktop avahi-daemon[5726]: Interface eth0.IPv4 no longer relevant for mDNS.Jul 11 01:24:32 ripley-desktop avahi-daemon[5726]: Joining mDNS multicast group on interface eth0.IPv4 with address 192.168.0.10.Jul 11 01:24:32 ripley-desktop avahi-daemon[5726]: New relevant interface eth0.IPv4 for mDNS.Jul 11 01:24:32 ripley-desktop avahi-daemon[5726]: Registering new address record for 192.168.0.10 on eth0.IPv4.Jul 11 01:24:33 ripley-desktop NetworkManager: <info> Clearing nscd hosts cache. Jul 11 01:24:33 ripley-desktop NetworkManager: <WARN> nm_spawn_process(): nm_spawn_process('/usr/sbin/nscd -i hosts'): could not spawn process. (Failed to execute child process "/usr/sbin/nscd" (No such file or directory)) Jul 11 01:24:33 ripley-desktop NetworkManager: <info> Activation (eth0) successful, device activated. Jul 11 01:24:33 ripley-desktop NetworkManager: <info> Activation (eth0) Finish handler scheduled. Jul 11 01:24:33 ripley-desktop NetworkManager: <info> Activation (eth0) Stage 5 of 5 (IP Configure Commit) complete. Jul 11 01:24:34 ripley-desktop ntpdate[6610]: step time server 91.189.94.4 offset -7195.470843 secJul 10 23:24:39 ripley-desktop avahi-daemon[5726]: Registering new address record for fe80::214:2aff:feed:9a05 on eth0.*.Jul 10 23:24:49 ripley-desktop amd[6227]: No fs type specified (key = "/defaults", map = ""root"")Jul 10 23:24:49 ripley-desktop amd[6227]: Unknown host: .TrashJul 10 23:24:49 ripley-desktop amd[6227]: No fs type specified (key = "/defaults", map = ""root"")Jul 10 23:24:49 ripley-desktop amd[6227]: Unknown host: .Trash-1000Jul 10 23:24:49 ripley-desktop hcid[6160]: Default passkey agent (:1.26, /org/bluez/passkey) registeredJul 10 23:24:49 ripley-desktop hcid[6160]: Default authorization agent (:1.26, /org/bluez/auth) registeredJul 10 23:24:56 ripley-desktop NetworkManager: <info> Updating allowed wireless network lists. Jul 10 23:24:56 ripley-desktop NetworkManager: <WARN> nm_dbus_get_networks_cb(): error received: org.freedesktop.NetworkManagerInfo.NoNetworks - There are no wireless networks stored.. Jul 10 23:26:50 ripley-desktop amd[6227]: No fs type specified (key = "/defaults", map = ""root"")Jul 10 23:26:50 ripley-desktop amd[6227]: Unknown host: .TrashJul 10 23:26:50 ripley-desktop amd[6227]: No fs type specified (key = "/defaults", map = ""root"")Jul 10 23:26:50 ripley-desktop amd[6227]: Unknown host: .Trash-1000Jul 11 00:13:19 ripley-desktop amd[6227]: No fs type specified (key = "/defaults", map = ""root"")Jul 11 00:13:19 ripley-desktop amd[6227]: Unknown host: .TrashJul 11 00:13:19 ripley-desktop amd[6227]: No fs type specified (key = "/defaults", map = ""root"")Jul 11 00:13:19 ripley-desktop amd[6227]: Unknown host: .Trash-1000Jul 11 00:16:00 ripley-desktop console-kit-daemon[5999]: WARNING: Unable to activate console: No such device or address Jul 11 00:16:01 ripley-desktop init: tty4 main process (5241) killed by TERM signalJul 11 00:16:01 ripley-desktop init: tty5 main process (5242) killed by TERM signalJul 11 00:16:01 ripley-desktop init: tty2 main process (5244) killed by TERM signalJul 11 00:16:01 ripley-desktop init: tty1 main process (6409) killed by TERM signalJul 11 00:16:01 ripley-desktop init: tty3 main process (5246) killed by TERM signalJul 11 00:16:01 ripley-desktop init: tty6 main process (5248) killed by TERM signalJul 11 00:16:01 ripley-desktop scim-bridge: Failed to open the panel socketJul 11 00:16:02 ripley-desktop avahi-daemon[5726]: Got SIGTERM, quitting.Jul 11 00:16:02 ripley-desktop avahi-daemon[5726]: Leaving mDNS multicast group on interface eth0.IPv4 with address 192.168.0.10.Jul 11 00:16:02 ripley-desktop scim-bridge: Failed to open the panel socketJul 11 00:16:04 ripley-desktop last message repeated 3 timesJul 11 00:16:04 ripley-desktop scim-bridge: Connection lost with the panel clientJul 11 00:16:05 ripley-desktop scim-bridge: Failed to open the panel socketJul 11 00:16:05 ripley-desktop amd[6227]: ignoring timeout request for active node /netJul 11 00:16:05 ripley-desktop amd[6227]: WARNING: automounter going down on signal 15Jul 11 00:16:05 ripley-desktop scim-bridge: Failed to open the panel socketJul 11 00:16:08 ripley-desktop last message repeated 4 timesJul 11 00:17:21 ripley-desktop NetworkManager: <info> starting... Jul 11 00:17:21 ripley-desktop avahi-daemon[5555]: Found user 'avahi' (UID 109) and group 'avahi' (GID 120).Jul 11 00:17:21 ripley-desktop avahi-daemon[5555]: Successfully dropped root privileges.Jul 11 00:17:21 ripley-desktop avahi-daemon[5555]: avahi-daemon 0.6.22 starting up.Jul 11 00:17:21 ripley-desktop avahi-daemon[5555]: Successfully called chroot().Jul 11 00:17:21 ripley-desktop avahi-daemon[5555]: Successfully dropped remaining capabilities.Jul 11 00:17:21 ripley-desktop avahi-daemon[5555]: No service file found in /etc/avahi/services.Jul 11 00:17:21 ripley-desktop avahi-daemon[5555]: Network interface enumeration completed.Jul 11 00:17:21 ripley-desktop avahi-daemon[5555]: Registering HINFO record with values 'I686'/'LINUX'.Jul 11 00:17:21 ripley-desktop avahi-daemon[5555]: Server startup complete. Host name is ripley-desktop.local. Local service cookie is 4217608234.Jul 11 00:17:56 ripley-desktop NetworkManager: <info> eth0: Device is fully-supported using driver '8139too'. Jul 11 00:17:56 ripley-desktop NetworkManager: <info> nm_device_init(): waiting for device's worker thread to start Jul 11 00:17:56 ripley-desktop NetworkManager: <info> nm_device_init(): device's worker thread started, continuing. Jul 11 00:17:56 ripley-desktop NetworkManager: <info> Now managing wired Ethernet (802.3) device 'eth0'. Jul 11 00:17:56 ripley-desktop NetworkManager: <info> Deactivating device eth0. Jul 11 00:17:56 ripley-desktop NetworkManager: <info> Will activate wired connection 'eth0' because it now has a link. Jul 11 00:17:56 ripley-desktop NetworkManager: <debug> [1215728276.988527] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/storage_model_DVD_ROM_TS_H352C'). Jul 11 00:17:56 ripley-desktop NetworkManager: <info> SWITCH: no current connection, found better connection 'eth0'. Jul 11 00:17:57 ripley-desktop hcid[5989]: Bluetooth HCI daemonJul 11 00:17:57 ripley-desktop hcid[5989]: Starting SDP serverJul 11 00:17:57 ripley-desktop hcid[5989]: Created local server at unix:abstract=/var/run/dbus-MIGx5n9Oey,guid=80fd2fc011fa6e0c925cc43348768a95Jul 11 00:17:57 ripley-desktop audio[6007]: Bluetooth Audio daemonJul 11 00:17:57 ripley-desktop audio[6007]: Unix socket created: 5Jul 11 00:17:57 ripley-desktop audio[6007]: audio.conf: Key file does not have key 'Enable'Jul 11 00:17:57 ripley-desktop audio[6007]: audio.conf: Key file does not have key 'Disable'Jul 11 00:17:57 ripley-desktop input[6011]: Bluetooth Input daemonJul 11 00:17:57 ripley-desktop input[6011]: Registered input manager path:/org/bluez/inputJul 11 00:17:57 ripley-desktop audio[6007]: add_service_record: got record id 0x10000Jul 11 00:17:57 ripley-desktop audio[6007]: audio.conf: Key file does not have key 'Disable'Jul 11 00:17:57 ripley-desktop audio[6007]: audio.conf: Key file does not have group 'A2DP'Jul 11 00:17:57 ripley-desktop last message repeated 3 timesJul 11 00:17:57 ripley-desktop audio[6007]: SEP 0x806d648 registered: type:0 codec:0 seid:1Jul 11 00:17:57 ripley-desktop audio[6007]: add_service_record: got record id 0x10001Jul 11 00:17:57 ripley-desktop audio[6007]: add_service_record: got record id 0x10002Jul 11 00:17:57 ripley-desktop audio[6007]: add_service_record: got record id 0x10003Jul 11 00:17:57 ripley-desktop audio[6007]: Registered manager path:/org/bluez/audioJul 11 00:17:57 ripley-desktop NetworkManager: <info> Will activate connection 'eth0'. Jul 11 00:17:57 ripley-desktop NetworkManager: <info> Device eth0 activation scheduled... Jul 11 00:17:57 ripley-desktop NetworkManager: <debug> [1215728277.988806] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/platform_bluetooth'). Jul 11 00:17:57 ripley-desktop NetworkManager: <info> Activation (eth0) started... Jul 11 00:17:57 ripley-desktop NetworkManager: <info> Activation (eth0) Stage 1 of 5 (Device Prepare) scheduled... Jul 11 00:17:57 ripley-desktop NetworkManager: <info> Activation (eth0) Stage 1 of 5 (Device Prepare) started... Jul 11 00:17:57 ripley-desktop NetworkManager: <info> Activation (eth0) Stage 2 of 5 (Device Configure) scheduled... Jul 11 00:17:57 ripley-desktop NetworkManager: <info> Activation (eth0) Stage 1 of 5 (Device Prepare) complete. Jul 11 00:17:57 ripley-desktop NetworkManager: <info> Activation (eth0) Stage 2 of 5 (Device Configure) starting... Jul 11 00:17:57 ripley-desktop NetworkManager: <info> Activation (eth0) Stage 2 of 5 (Device Configure) successful. Jul 11 00:17:57 ripley-desktop NetworkManager: <info> Activation (eth0) Stage 3 of 5 (IP Configure Start) scheduled. Jul 11 00:17:57 ripley-desktop NetworkManager: <info> Activation (eth0) Stage 2 of 5 (Device Configure) complete. Jul 11 00:17:57 ripley-desktop NetworkManager: <info> Activation (eth0) Stage 3 of 5 (IP Configure Start) started... Jul 11 00:17:58 ripley-desktop amd[6058]: Unable to parse hostport (null) for ldap map /usr/share/am-utils/amd.netJul 11 00:17:58 ripley-desktop NetworkManager: <info> Activation (eth0) Beginning DHCP transaction. Jul 11 00:17:58 ripley-desktop NetworkManager: <info> DHCP daemon state is now 12 (successfully started) for interface eth0 Jul 11 00:17:58 ripley-desktop NetworkManager: <info> Activation (eth0) Stage 3 of 5 (IP Configure Start) complete. Jul 11 00:18:00 ripley-desktop NetworkManager: <info> DHCP daemon state is now 1 (starting) for interface eth0 Jul 11 00:18:03 ripley-desktop dhclient: DHCPREQUEST of 192.168.0.10 on eth0 to 255.255.255.255 port 67Jul 11 00:18:04 ripley-desktop dhclient: DHCPACK of 192.168.0.10 from 192.168.0.1Jul 11 00:18:04 ripley-desktop avahi-daemon[5555]: Joining mDNS multicast group on interface eth0.IPv4 with address 192.168.0.10.Jul 11 00:18:04 ripley-desktop avahi-daemon[5555]: New relevant interface eth0.IPv4 for mDNS.Jul 11 00:18:04 ripley-desktop avahi-daemon[5555]: Registering new address record for 192.168.0.10 on eth0.IPv4.Jul 11 00:18:04 ripley-desktop NetworkManager: <info> DHCP daemon state is now 4 (reboot) for interface eth0 Jul 11 00:18:04 ripley-desktop NetworkManager: <info> Activation (eth0) Stage 4 of 5 (IP Configure Get) scheduled... Jul 11 00:18:04 ripley-desktop NetworkManager: <info> Activation (eth0) Stage 4 of 5 (IP Configure Get) started... Jul 11 00:18:04 ripley-desktop dhclient: bound to 192.168.0.10 -- renewal in 1463 seconds.Jul 11 00:18:05 ripley-desktop NetworkManager: <info> Retrieved the following IP4 configuration from the DHCP daemon: Jul 11 00:18:05 ripley-desktop NetworkManager: <info> address 192.168.0.10 Jul 11 00:18:05 ripley-desktop NetworkManager: <info> netmask 255.255.255.0 Jul 11 00:18:05 ripley-desktop NetworkManager: <info> broadcast 192.168.0.255 Jul 11 00:18:05 ripley-desktop NetworkManager: <info> gateway 192.168.0.1 Jul 11 00:18:05 ripley-desktop NetworkManager: <info> nameserver 62.42.230.24 Jul 11 00:18:05 ripley-desktop NetworkManager: <info> nameserver 62.42.63.52 Jul 11 00:18:05 ripley-desktop NetworkManager: <info> Activation (eth0) Stage 5 of 5 (IP Configure Commit) scheduled... Jul 11 00:18:05 ripley-desktop NetworkManager: <info> Activation (eth0) Stage 4 of 5 (IP Configure Get) complete. Jul 11 00:18:05 ripley-desktop NetworkManager: <info> Activation (eth0) Stage 5 of 5 (IP Configure Commit) started... Jul 11 00:18:05 ripley-desktop avahi-daemon[5555]: Withdrawing address record for 192.168.0.10 on eth0.Jul 11 00:18:05 ripley-desktop avahi-daemon[5555]: Leaving mDNS multicast group on interface eth0.IPv4 with address 192.168.0.10.Jul 11 00:18:05 ripley-desktop avahi-daemon[5555]: Interface eth0.IPv4 no longer relevant for mDNS.Jul 11 00:18:05 ripley-desktop avahi-daemon[5555]: Joining mDNS multicast group on interface eth0.IPv4 with address 192.168.0.10.Jul 11 00:18:05 ripley-desktop avahi-daemon[5555]: New relevant interface eth0.IPv4 for mDNS.Jul 11 00:18:05 ripley-desktop avahi-daemon[5555]: Registering new address record for 192.168.0.10 on eth0.IPv4.Jul 11 00:18:06 ripley-desktop NetworkManager: <info> Clearing nscd hosts cache. Jul 11 00:18:06 ripley-desktop NetworkManager: <WARN> nm_spawn_process(): nm_spawn_process('/usr/sbin/nscd -i hosts'): could not spawn process. (Failed to execute child process "/usr/sbin/nscd" (No such file or directory)) Jul 11 00:18:06 ripley-desktop NetworkManager: <info> Activation (eth0) successful, device activated. Jul 11 00:18:06 ripley-desktop NetworkManager: <info> Activation (eth0) Finish handler scheduled. Jul 11 00:18:06 ripley-desktop NetworkManager: <info> Activation (eth0) Stage 5 of 5 (IP Configure Commit) complete. Jul 11 00:18:07 ripley-desktop avahi-daemon[5555]: Registering new address record for fe80::214:2aff:feed:9a05 on eth0.*.Jul 11 00:18:07 ripley-desktop ntpdate[6430]: adjust time server 91.189.94.4 offset -0.367853 secJul 11 00:18:17 ripley-desktop amd[6058]: No fs type specified (key = "/defaults", map = ""root"")Jul 11 00:18:17 ripley-desktop amd[6058]: Unknown host: .TrashJul 11 00:18:17 ripley-desktop amd[6058]: No fs type specified (key = "/defaults", map = ""root"")Jul 11 00:18:17 ripley-desktop amd[6058]: Unknown host: .Trash-1000Jul 11 00:18:19 ripley-desktop hcid[5989]: Default passkey agent (:1.26, /org/bluez/passkey) registeredJul 11 00:18:19 ripley-desktop hcid[5989]: Default authorization agent (:1.26, /org/bluez/auth) registeredJul 11 00:18:23 ripley-desktop NetworkManager: <info> Updating allowed wireless network lists. Jul 11 00:18:23 ripley-desktop NetworkManager: <WARN> nm_dbus_get_networks_cb(): error received: org.freedesktop.NetworkManagerInfo.NoNetworks - There are no wireless networks stored.. Jul 11 00:39:30 ripley-desktop amd[6058]: No fs type specified (key = "/defaults", map = ""root"")Jul 11 00:39:30 ripley-desktop amd[6058]: Unknown host: .TrashJul 11 00:39:30 ripley-desktop amd[6058]: No fs type specified (key = "/defaults", map = ""root"")Jul 11 00:39:30 ripley-desktop amd[6058]: Unknown host: .Trash-1000Jul 11 00:40:01 ripley-desktop amd[6058]: No fs type specified (key = "/defaults", map = ""root"")Jul 11 00:40:01 ripley-desktop amd[6058]: Unknown host: .TrashJul 11 00:40:01 ripley-desktop amd[6058]: No fs type specified (key = "/defaults", map = ""root"")Jul 11 00:40:01 ripley-desktop amd[6058]: Unknown host: .Trash-1000Jul 11 00:40:07 ripley-desktop amd[6058]: No fs type specified (key = "/defaults", map = ""root"")Jul 11 00:40:07 ripley-desktop amd[6058]: Unknown host: .TrashJul 11 00:40:07 ripley-desktop amd[6058]: No fs type specified (key = "/defaults", map = ""root"")Jul 11 00:40:07 ripley-desktop amd[6058]: Unknown host: .Trash-1000Jul 11 00:40:13 ripley-desktop amd[6058]: No fs type specified (key = "/defaults", map = ""root"")Jul 11 00:40:13 ripley-desktop amd[6058]: Unknown host: .TrashJul 11 00:40:13 ripley-desktop amd[6058]: No fs type specified (key = "/defaults", map = ""root"")Jul 11 00:40:13 ripley-desktop amd[6058]: Unknown host: .Trash-1000Jul 11 00:42:27 ripley-desktop dhclient: DHCPREQUEST of <null address> on eth0 to 192.168.0.1 port 67Jul 11 00:42:27 ripley-desktop dhclient: DHCPACK of 192.168.0.10 from 192.168.0.1Jul 11 00:42:28 ripley-desktop NetworkManager: <info> DHCP daemon state is now 3 (renew) for interface eth0 Jul 11 00:42:28 ripley-desktop dhclient: bound to 192.168.0.10 -- renewal in 1621 seconds.xorgLog:This is a pre-release version of the X server from The X.Org Foundation.It is not supported in any way.Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.Select the "xorg" product for bugs you find in this release.Before reporting bugs in pre-release versions please check thelatest version in the X.Org Foundation git repository.See http://wiki.x.org/wiki/GitPage for git access instructions.X.Org X Server 1.4.0.90Release Date: 5 September 2007X Protocol Version 11, Revision 0Build Operating System: Linux Ubuntu (xorg-server 2:1.4.1~git20080131-1ubuntu9.2)Current Operating System: Linux ripley-desktop 2.6.24-19-generic #1 SMP Wed Jun 18 14:43:41 UTC 2008 i686Build Date: 13 June 2008 01:08:21AM Before reporting problems, check http://wiki.x.org to make sure that you have the latest version.Module Loader presentMarkers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown.(==) Log file: "/var/log/Xorg.0.log", Time: Fri Jul 11 00:17:57 2008(==) Using config file: "/etc/X11/xorg.conf"(==) ServerLayout "Default Layout"(**) |-->Screen "Default Screen" (0)(**) | |-->Monitor "Configured Monitor"(**) | |-->Device "Configured Video Device"(==) Automatically adding devices(==) Automatically enabling devices(==) No FontPath specified. Using compiled-in default.(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. Entry deleted from font path.(==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/100dpi/:unscaled, /usr/share/fonts/X11/75dpi/:unscaled, /usr/share/fonts/X11/Type1, /usr/share/fonts/X11/100dpi, /usr/share/fonts/X11/75dpi, /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType(==) RgbPath set to "/etc/X11/rgb"(==) ModulePath set to "/usr/lib/xorg/modules"(==) |-->Input Device "Configured Mouse"(==) |-->Input Device "Generic Keyboard"(==) The core pointer device wasn't specified explicitly in the layout. Using the first core pointer device.(==) The core keyboard device wasn't specified explicitly in the layout. Using the first keyboard device.(II) Open ACPI successful (/var/run/acpid.socket)(II) Loader magic: 0x81dc500(II) Module ABI versions: X.Org ANSI C Emulation: 0.3 X.Org Video Driver: 2.0 X.Org XInput driver : 2.0 X.Org Server Extension : 0.3 X.Org Font Renderer : 0.5(II) Loader running on linux(II) LoadModule: "pcidata"(II) Loading /usr/lib/xorg/modules//libpcidata.so(II) Module pcidata: vendor="X.Org Foundation" compiled for 1.4.0.90, module version = 1.0.0 ABI class: X.Org Video Driver, version 2.0(++) using VT number 7(II) PCI: PCI scan (all values are in hex)(II) PCI: 00:00:0: chip 1002,5a33 card 103c,2a31 rev 01 class 06,00,00 hdr 00(II) PCI: 00:02:0: chip 1002,5a34 card 0000,0000 rev 00 class 06,04,00 hdr 01(II) PCI: 00:11:0: chip 1002,437a card 103c,2a31 rev 80 class 01,01,8f hdr 00(II) PCI: 00:12:0: chip 1002,4379 card 103c,2a31 rev 80 class 01,01,8f hdr 00(II) PCI: 00:13:0: chip 1002,4374 card 103c,2a31 rev 80 class 0c,03,10 hdr 80(II) PCI: 00:13:1: chip 1002,4375 card 103c,2a31 rev 80 class 0c,03,10 hdr 00(II) PCI: 00:13:2: chip 1002,4373 card 103c,2a31 rev 80 class 0c,03,20 hdr 00(II) PCI: 00:14:0: chip 1002,4372 card 103c,2a31 rev 81 class 0c,05,00 hdr 80(II) PCI: 00:14:1: chip 1002,4376 card 103c,2a31 rev 80 class 01,01,8a hdr 00(II) PCI: 00:14:2: chip 1002,437b card 103c,2a31 rev 01 class 04,03,00 hdr 00(II) PCI: 00:14:3: chip 1002,4377 card 0000,0000 rev 80 class 06,01,00 hdr 80(II) PCI: 00:14:4: chip 1002,4371 card 0000,0000 rev 80 class 06,04,01 hdr 81(II) PCI: 01:00:0: chip 10de,01d1 card 1043,0346 rev a1 class 03,00,00 hdr 00(II) PCI: 02:05:0: chip 10ec,8139 card 103c,2a31 rev 10 class 02,00,00 hdr 00(II) PCI: 02:06:0: chip 1106,3044 card 103c,2a31 rev 80 class 0c,00,10 hdr 00(II) PCI: End of PCI scan(II) Host-to-PCI bridge:(II) Bus 0: bridge is at (0:0:0), (0,0,2), BCTRL: 0x0008 (VGA_EN is set)(II) Bus 0 I/O range: [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B](II) Bus 0 non-prefetchable memory range: [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B](II) Bus 0 prefetchable memory range: [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B](II) PCI-to-PCI bridge:(II) Bus 1: bridge is at (0:2:0), (0,1,1), BCTRL: 0x000b (VGA_EN is set)(II) Bus 1 non-prefetchable memory range: [0] -1 0 0xfc000000 - 0xfeafffff (0x2b00000) MX[B](II) Bus 1 prefetchable memory range: [0] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[B](II) PCI-to-ISA bridge:(II) Bus -1: bridge is at (0:20:3), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)(II) Subtractive PCI-to-PCI bridge:(II) Bus 2: bridge is at (0:20:4), (0,2,2), BCTRL: 0x0007 (VGA_EN is cleared)(II) Bus 2 I/O range: [0] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B] [1] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[B] [2] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[B] [3] -1 0 0x0000ec00 - 0x0000ecff (0x100) IX[B](II) Bus 2 non-prefetchable memory range: [0] -1 0 0xfeb00000 - 0xfebfffff (0x100000) MX[B](--) PCI:*(1:0:0) nVidia Corporation G72 [GeForce 7300 LE] rev 161, Mem @ 0xfd000000/24, 0xd0000000/28, 0xfc000000/24, BIOS @ 0xfeae0000/17(II) Addressable bus resource ranges are [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] [1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B](II) OS-reported resource ranges: [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B](II) PCI Memory resource overlap reduced 0xe0000000 from 0xe0000000 to 0xdfffffff(II) Active PCI resource ranges: [0] -1 0 0xfebff000 - 0xfebff7ff (0x800) MX[B] [1] -1 0 0xfebffc00 - 0xfebffcff (0x100) MX[B] [2] -1 0 0xfbff8000 - 0xfbffbfff (0x4000) MX[B] [3] -1 0 0x50000000 - 0x500003ff (0x400) MX[B] [4] -1 0 0xfbffc000 - 0xfbffcfff (0x1000) MX[B] [5] -1 0 0xfbffd000 - 0xfbffdfff (0x1000) MX[B] [6] -1 0 0xfbffe000 - 0xfbffefff (0x1000) MX[B] [7] -1 0 0xfbfff800 - 0xfbfff9ff (0x200) MX[B] [8] -1 0 0xfbfff000 - 0xfbfff1ff (0x200) MX[B] [9] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O [10] -1 0 0xfeae0000 - 0xfeafffff (0x20000) MX[B](B) [11] -1 0 0xfc000000 - 0xfcffffff (0x1000000) MX[B](B) [12] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[B](B) [13] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[B](B) [14] -1 0 0x0000e400 - 0x0000e47f (0x80) IX[B] [15] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[B] [16] -1 0 0x0000ff00 - 0x0000ff0f (0x10) IX[B] [17] -1 0 0x00000374 - 0x00000374 (0x1) IX[B] [18] -1 0 0x00000170 - 0x00000177 (0x8) IX[B] [19] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[B] [20] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B] [21] -1 0 0x00000b00 - 0x00000b0f (0x10) IX[B] [22] -1 0 0x00008000 - 0x0000800f (0x10) IX[B] [23] -1 0 0x00009000 - 0x00009003 (0x4) IX[B] [24] -1 0 0x0000a000 - 0x0000a007 (0x8) IX[B] [25] -1 0 0x0000b000 - 0x0000b003 (0x4) IX[B] [26] -1 0 0x0000d000 - 0x0000d007 (0x8) IX[B] [27] -1 0 0x00003000 - 0x0000300f (0x10) IX[B] [28] -1 0 0x00004000 - 0x00004003 (0x4) IX[B] [29] -1 0 0x00005000 - 0x00005007 (0x8) IX[B] [30] -1 0 0x00006000 - 0x00006003 (0x4) IX[B] [31] -1 0 0x00007000 - 0x00007007 (0x8) IX[B](II) Active PCI resource ranges after removing overlaps: [0] -1 0 0xfebff000 - 0xfebff7ff (0x800) MX[B] [1] -1 0 0xfebffc00 - 0xfebffcff (0x100) MX[B] [2] -1 0 0xfbff8000 - 0xfbffbfff (0x4000) MX[B] [3] -1 0 0x50000000 - 0x500003ff (0x400) MX[B] [4] -1 0 0xfbffc000 - 0xfbffcfff (0x1000) MX[B] [5] -1 0 0xfbffd000 - 0xfbffdfff (0x1000) MX[B] [6] -1 0 0xfbffe000 - 0xfbffefff (0x1000) MX[B] [7] -1 0 0xfbfff800 - 0xfbfff9ff (0x200) MX[B] [8] -1 0 0xfbfff000 - 0xfbfff1ff (0x200) MX[B] [9] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O [10] -1 0 0xfeae0000 - 0xfeafffff (0x20000) MX[B](B) [11] -1 0 0xfc000000 - 0xfcffffff (0x1000000) MX[B](B) [12] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[B](B) [13] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[B](B) [14] -1 0 0x0000e400 - 0x0000e47f (0x80) IX[B] [15] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[B] [16] -1 0 0x0000ff00 - 0x0000ff0f (0x10) IX[B] [17] -1 0 0x00000374 - 0x00000374 (0x1) IX[B] [18] -1 0 0x00000170 - 0x00000177 (0x8) IX[B] [19] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[B] [20] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B] [21] -1 0 0x00000b00 - 0x00000b0f (0x10) IX[B] [22] -1 0 0x00008000 - 0x0000800f (0x10) IX[B] [23] -1 0 0x00009000 - 0x00009003 (0x4) IX[B] [24] -1 0 0x0000a000 - 0x0000a007 (0x8) IX[B] [25] -1 0 0x0000b000 - 0x0000b003 (0x4) IX[B] [26] -1 0 0x0000d000 - 0x0000d007 (0x8) IX[B] [27] -1 0 0x00003000 - 0x0000300f (0x10) IX[B] [28] -1 0 0x00004000 - 0x00004003 (0x4) IX[B] [29] -1 0 0x00005000 - 0x00005007 (0x8) IX[B] [30] -1 0 0x00006000 - 0x00006003 (0x4) IX[B] [31] -1 0 0x00007000 - 0x00007007 (0x8) IX[B](II) OS-reported resource ranges after removing overlaps with PCI: [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B](II) All system resource ranges: [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0xfebff000 - 0xfebff7ff (0x800) MX[B] [5] -1 0 0xfebffc00 - 0xfebffcff (0x100) MX[B] [6] -1 0 0xfbff8000 - 0xfbffbfff (0x4000) MX[B] [7] -1 0 0x50000000 - 0x500003ff (0x400) MX[B] [8] -1 0 0xfbffc000 - 0xfbffcfff (0x1000) MX[B] [9] -1 0 0xfbffd000 - 0xfbffdfff (0x1000) MX[B] [10] -1 0 0xfbffe000 - 0xfbffefff (0x1000) MX[B] [11] -1 0 0xfbfff800 - 0xfbfff9ff (0x200) MX[B] [12] -1 0 0xfbfff000 - 0xfbfff1ff (0x200) MX[B] [13] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O [14] -1 0 0xfeae0000 - 0xfeafffff (0x20000) MX[B](B) [15] -1 0 0xfc000000 - 0xfcffffff (0x1000000) MX[B](B) [16] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[B](B) [17] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[B](B) [18] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [19] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [20] -1 0 0x0000e400 - 0x0000e47f (0x80) IX[B] [21] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[B] [22] -1 0 0x0000ff00 - 0x0000ff0f (0x10) IX[B] [23] -1 0 0x00000374 - 0x00000374 (0x1) IX[B] [24] -1 0 0x00000170 - 0x00000177 (0x8) IX[B] [25] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[B] [26] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B] [27] -1 0 0x00000b00 - 0x00000b0f (0x10) IX[B] [28] -1 0 0x00008000 - 0x0000800f (0x10) IX[B] [29] -1 0 0x00009000 - 0x00009003 (0x4) IX[B] [30] -1 0 0x0000a000 - 0x0000a007 (0x8) IX[B] [31] -1 0 0x0000b000 - 0x0000b003 (0x4) IX[B] [32] -1 0 0x0000d000 - 0x0000d007 (0x8) IX[B] [33] -1 0 0x00003000 - 0x0000300f (0x10) IX[B] [34] -1 0 0x00004000 - 0x00004003 (0x4) IX[B] [35] -1 0 0x00005000 - 0x00005007 (0x8) IX[B] [36] -1 0 0x00006000 - 0x00006003 (0x4) IX[B] [37] -1 0 0x00007000 - 0x00007007 (0x8) IX[B](II) "extmod" will be loaded by default.(II) "dbe" will be loaded by default.(II) "glx" will be loaded. This was enabled by default and also specified in the config file.(II) "freetype" will be loaded by default.(II) "record" will be loaded by default.(II) "dri" will be loaded by default.(II) LoadModule: "glx"(II) Loading /usr/lib/xorg/modules/extensions//libglx.so(II) Module glx: vendor="NVIDIA Corporation" compiled for 4.0.2, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 0.1(II) NVIDIA GLX Module 169.12 Thu Feb 14 18:45:56 PST 2008(II) Loading extension GLX(II) LoadModule: "extmod"(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so(II) Module extmod: vendor="X.Org Foundation" compiled for 1.4.0.90, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 0.3(II) Loading extension SHAPE(II) Loading extension MIT-SUNDRY-NONSTANDARD(II) Loading extension BIG-REQUESTS(II) Loading extension SYNC(II) Loading extension MIT-SCREEN-SAVER(II) Loading extension XC-MISC(II) Loading extension XFree86-VidModeExtension(II) Loading extension XFree86-Misc(II) Loading extension XFree86-DGA(II) Loading extension DPMS(II) Loading extension TOG-CUP(II) Loading extension Extended-Visual-Information(II) Loading extension XVideo(II) Loading extension XVideo-MotionCompensation(II) Loading extension X-Resource(II) LoadModule: "dbe"(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so(II) Module dbe: vendor="X.Org Foundation" compiled for 1.4.0.90, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 0.3(II) Loading extension DOUBLE-BUFFER(II) LoadModule: "freetype"(II) Loading /usr/lib/xorg/modules//fonts/libfreetype.so(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project" compiled for 1.4.0.90, module version = 2.1.0 Module class: X.Org Font Renderer ABI class: X.Org Font Renderer, version 0.5(II) Loading font FreeType(II) LoadModule: "record"(II) Loading /usr/lib/xorg/modules/extensions//librecord.so(II) Module record: vendor="X.Org Foundation" compiled for 1.4.0.90, module version = 1.13.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 0.3(II) Loading extension RECORD(II) LoadModule: "dri"(II) Loading /usr/lib/xorg/modules/extensions//libdri.so(II) Module dri: vendor="X.Org Foundation" compiled for 1.4.0.90, module version = 1.0.0 ABI class: X.Org Server Extension, version 0.3(II) Loading extension XFree86-DRI(II) LoadModule: "nvidia"(II) Loading /usr/lib/xorg/modules/drivers//nvidia_drv.so(II) Module nvidia: vendor="NVIDIA Corporation" compiled for 4.0.2, module version = 1.0.0 Module class: X.Org Video Driver(II) LoadModule: "mouse"(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so(II) Module mouse: vendor="X.Org Foundation" compiled for 1.4.0, module version = 1.2.3 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 2.0(II) LoadModule: "kbd"(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so(II) Module kbd: vendor="X.Org Foundation" compiled for 1.4.0, module version = 1.2.2 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 2.0(II) NVIDIA dlloader X Driver 169.12 Thu Feb 14 17:55:38 PST 2008(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs(II) Primary Device is: PCI 01:00:0(--) Assigning device section with no busID to primary device(--) Chipset NVIDIA GPU found(II) Loading sub module "fb"(II) LoadModule: "fb"(II) Loading /usr/lib/xorg/modules//libfb.so(II) Module fb: vendor="X.Org Foundation" compiled for 1.4.0.90, module version = 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.3(II) Loading sub module "wfb"(II) LoadModule: "wfb"(II) Loading /usr/lib/xorg/modules//libwfb.so(II) Module wfb: vendor="X.Org Foundation" compiled for 1.4.0.90, module version = 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.3(II) Loading sub module "ramdac"(II) LoadModule: "ramdac"(II) Module "ramdac" already built-in(II) resource ranges after xf86ClaimFixedResources() call: [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0xfebff000 - 0xfebff7ff (0x800) MX[B] [5] -1 0 0xfebffc00 - 0xfebffcff (0x100) MX[B] [6] -1 0 0xfbff8000 - 0xfbffbfff (0x4000) MX[B] [7] -1 0 0x50000000 - 0x500003ff (0x400) MX[B] [8] -1 0 0xfbffc000 - 0xfbffcfff (0x1000) MX[B] [9] -1 0 0xfbffd000 - 0xfbffdfff (0x1000) MX[B] [10] -1 0 0xfbffe000 - 0xfbffefff (0x1000) MX[B] [11] -1 0 0xfbfff800 - 0xfbfff9ff (0x200) MX[B] [12] -1 0 0xfbfff000 - 0xfbfff1ff (0x200) MX[B] [13] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O [14] -1 0 0xfeae0000 - 0xfeafffff (0x20000) MX[B](B) [15] -1 0 0xfc000000 - 0xfcffffff (0x1000000) MX[B](B) [16] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[B](B) [17] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[B](B) [18] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [19] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [20] -1 0 0x0000e400 - 0x0000e47f (0x80) IX[B] [21] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[B] [22] -1 0 0x0000ff00 - 0x0000ff0f (0x10) IX[B] [23] -1 0 0x00000374 - 0x00000374 (0x1) IX[B] [24] -1 0 0x00000170 - 0x00000177 (0x8) IX[B] [25] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[B] [26] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B] [27] -1 0 0x00000b00 - 0x00000b0f (0x10) IX[B] [28] -1 0 0x00008000 - 0x0000800f (0x10) IX[B] [29] -1 0 0x00009000 - 0x00009003 (0x4) IX[B] [30] -1 0 0x0000a000 - 0x0000a007 (0x8) IX[B] [31] -1 0 0x0000b000 - 0x0000b003 (0x4) IX[B] [32] -1 0 0x0000d000 - 0x0000d007 (0x8) IX[B] [33] -1 0 0x00003000 - 0x0000300f (0x10) IX[B] [34] -1 0 0x00004000 - 0x00004003 (0x4) IX[B] [35] -1 0 0x00005000 - 0x00005007 (0x8) IX[B] [36] -1 0 0x00006000 - 0x00006003 (0x4) IX[B] [37] -1 0 0x00007000 - 0x00007007 (0x8) IX[B](II) resource ranges after probing: [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0xfebff000 - 0xfebff7ff (0x800) MX[B] [5] -1 0 0xfebffc00 - 0xfebffcff (0x100) MX[B] [6] -1 0 0xfbff8000 - 0xfbffbfff (0x4000) MX[B] [7] -1 0 0x50000000 - 0x500003ff (0x400) MX[B] [8] -1 0 0xfbffc000 - 0xfbffcfff (0x1000) MX[B] [9] -1 0 0xfbffd000 - 0xfbffdfff (0x1000) MX[B] [10] -1 0 0xfbffe000 - 0xfbffefff (0x1000) MX[B] [11] -1 0 0xfbfff800 - 0xfbfff9ff (0x200) MX[B] [12] -1 0 0xfbfff000 - 0xfbfff1ff (0x200) MX[B] [13] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O [14] -1 0 0xfeae0000 - 0xfeafffff (0x20000) MX[B](B) [15] -1 0 0xfc000000 - 0xfcffffff (0x1000000) MX[B](B) [16] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[B](B) [17] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[B](B) [18] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] [19] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [20] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [21] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [22] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [23] -1 0 0x0000e400 - 0x0000e47f (0x80) IX[B] [24] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[B] [25] -1 0 0x0000ff00 - 0x0000ff0f (0x10) IX[B] [26] -1 0 0x00000374 - 0x00000374 (0x1) IX[B] [27] -1 0 0x00000170 - 0x00000177 (0x8) IX[B] [28] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[B] [29] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B] [30] -1 0 0x00000b00 - 0x00000b0f (0x10) IX[B] [31] -1 0 0x00008000 - 0x0000800f (0x10) IX[B] [32] -1 0 0x00009000 - 0x00009003 (0x4) IX[B] [33] -1 0 0x0000a000 - 0x0000a007 (0x8) IX[B] [34] -1 0 0x0000b000 - 0x0000b003 (0x4) IX[B] [35] -1 0 0x0000d000 - 0x0000d007 (0x8) IX[B] [36] -1 0 0x00003000 - 0x0000300f (0x10) IX[B] [37] -1 0 0x00004000 - 0x00004003 (0x4) IX[B] [38] -1 0 0x00005000 - 0x00005007 (0x8) IX[B] [39] -1 0 0x00006000 - 0x00006003 (0x4) IX[B] [40] -1 0 0x00007000 - 0x00007007 (0x8) IX[B] [41] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] [42] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](II) Setting vga for screen 0.(II) NVIDIA(0): Creating default Display subsection in Screen section "Default Screen" for depth/fbbpp 24/32(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32(==) NVIDIA(0): RGB weight 888(==) NVIDIA(0): Default visual is TrueColor(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)(**) NVIDIA(0): Option "NoLogo" "True"(**) NVIDIA(0): Enabling RENDER acceleration(II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is(II) NVIDIA(0): enabled.(II) NVIDIA(0): NVIDIA GPU GeForce 7300 LE (G72) at PCI:1:0:0 (GPU-0)(--) NVIDIA(0): Memory: 262144 kBytes(--) NVIDIA(0): VideoBIOS: 05.72.22.29.02(II) NVIDIA(0): Detected PCI Express Link width: 16X(--) NVIDIA(0): Interlaced video modes are supported on this GPU(--) NVIDIA(0): Connected display device(s) on GeForce 7300 LE at PCI:1:0:0:(--) NVIDIA(0): CMO CMC 17 (CRT-0)(--) NVIDIA(0): CMO CMC 17 (CRT-0): 400.0 MHz maximum pixel clock(II) NVIDIA(0): Assigned Display Device: CRT-0(==) NVIDIA(0): (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"(==) NVIDIA(0): will be used as the requested mode.(==) NVIDIA(0): (II) NVIDIA(0): Validated modes:(II) NVIDIA(0): "nvidia-auto-select"(II) NVIDIA(0): Virtual screen size determined to be 1280 x 1024(--) NVIDIA(0): DPI set to (95, 96); computed from "UseEdidDpi" X config(--) NVIDIA(0): option(==) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.(--) Depth 24 pixmap format is 32 bpp(II) do I need RAC? No, I don't.(II) resource ranges after preInit: [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0xfebff000 - 0xfebff7ff (0x800) MX[B] [5] -1 0 0xfebffc00 - 0xfebffcff (0x100) MX[B] [6] -1 0 0xfbff8000 - 0xfbffbfff (0x4000) MX[B] [7] -1 0 0x50000000 - 0x500003ff (0x400) MX[B] [8] -1 0 0xfbffc000 - 0xfbffcfff (0x1000) MX[B] [9] -1 0 0xfbffd000 - 0xfbffdfff (0x1000) MX[B] [10] -1 0 0xfbffe000 - 0xfbffefff (0x1000) MX[B] [11] -1 0 0xfbfff800 - 0xfbfff9ff (0x200) MX[B] [12] -1 0 0xfbfff000 - 0xfbfff1ff (0x200) MX[B] [13] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O [14] -1 0 0xfeae0000 - 0xfeafffff (0x20000) MX[B](B) [15] -1 0 0xfc000000 - 0xfcffffff (0x1000000) MX[B](B) [16] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[B](B) [17] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[B](B) [18] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] [19] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [20] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [21] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [22] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [23] -1 0 0x0000e400 - 0x0000e47f (0x80) IX[B] [24] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[B] [25] -1 0 0x0000ff00 - 0x0000ff0f (0x10) IX[B] [26] -1 0 0x00000374 - 0x00000374 (0x1) IX[B] [27] -1 0 0x00000170 - 0x00000177 (0x8) IX[B] [28] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[B] [29] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B] [30] -1 0 0x00000b00 - 0x00000b0f (0x10) IX[B] [31] -1 0 0x00008000 - 0x0000800f (0x10) IX[B] [32] -1 0 0x00009000 - 0x00009003 (0x4) IX[B] [33] -1 0 0x0000a000 - 0x0000a007 (0x8) IX[B] [34] -1 0 0x0000b000 - 0x0000b003 (0x4) IX[B] [35] -1 0 0x0000d000 - 0x0000d007 (0x8) IX[B] [36] -1 0 0x00003000 - 0x0000300f (0x10) IX[B] [37] -1 0 0x00004000 - 0x00004003 (0x4) IX[B] [38] -1 0 0x00005000 - 0x00005007 (0x8) IX[B] [39] -1 0 0x00006000 - 0x00006003 (0x4) IX[B] [40] -1 0 0x00007000 - 0x00007007 (0x8) IX[B] [41] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] [42] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](II) NVIDIA(0): Initialized GPU GART.(II) NVIDIA(0): Setting mode "nvidia-auto-select"(II) Loading extension NV-GLX(II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture(==) NVIDIA(0): Backing store disabled(==) NVIDIA(0): Silken mouse enabled(II) NVIDIA(0): DPMS enabled(II) Loading extension NV-CONTROL(==) RandR enabled(II) Setting vga for screen 0.(II) Initializing built-in extension MIT-SHM(II) Initializing built-in extension XInputExtension(II) Initializing built-in extension XTEST(II) Initializing built-in extension XKEYBOARD(II) Initializing built-in extension XC-APPGROUP(II) Initializing built-in extension XAccessControlExtension(II) Initializing built-in extension SECURITY(II) Initializing built-in extension XINERAMA(II) Initializing built-in extension XFIXES(II) Initializing built-in extension XFree86-Bigfont(II) Initializing built-in extension RENDER(II) Initializing built-in extension RANDR(II) Initializing built-in extension COMPOSITE(II) Initializing built-in extension DAMAGE(II) Initializing built-in extension XEVIE(II) Initializing extension GLX(WW) Configured Mouse: No Device specified, looking for one...(II) Configured Mouse: Setting Device option to "/dev/input/mice"(--) Configured Mouse: Device: "/dev/input/mice"(==) Configured Mouse: Protocol: "Auto"(**) Option "CorePointer"(**) Configured Mouse: always reports core events(**) Option "Device" "/dev/input/mice"(==) Configured Mouse: Emulate3Buttons, Emulate3Timeout: 50(**) Configured Mouse: ZAxisMapping: buttons 4 and 5(**) Configured Mouse: Buttons: 9(**) Configured Mouse: Sensitivity: 1(**) Option "CoreKeyboard"(**) Generic Keyboard: always reports core events(**) Option "Protocol" "standard"(**) Generic Keyboard: Protocol: standard(**) Option "AutoRepeat" "500 30"(**) Option "XkbRules" "xorg"(**) Generic Keyboard: XkbRules: "xorg"(**) Option "XkbModel" "pc105"(**) Generic Keyboard: XkbModel: "pc105"(**) Option "XkbLayout" "es"(**) Generic Keyboard: XkbLayout: "es"(**) Option "CustomKeycodes" "off"(**) Generic Keyboard: CustomKeycodes disabled(II) evaluating device (Generic Keyboard)(II) XINPUT: Adding extended input device "Generic Keyboard" (type: KEYBOARD)(II) evaluating device (Configured Mouse)(II) XINPUT: Adding extended input device "Configured Mouse" (type: MOUSE)(--) Configured Mouse: PnP-detected protocol: "ExplorerPS/2"(II) Configured Mouse: ps2EnableDataReporting: succeededSetClientVersion: 0 9(II) 3rd Button detected: disabling emulate3Buttonapt:# deb cdrom:[Ubuntu 8.04 _Hardy Heron_ - Release i386 (20080423)]/ hardy main restricted# See http://help.ubuntu.com/community/UpgradeNotes for how to upgrade to# newer versions of the distribution.deb http://archive.ubuntu.com/ubuntu/ hardy main restricteddeb-src http://archive.ubuntu.com/ubuntu/ hardy main restricted## Major bug fix updates produced after the final release of the## distribution.deb http://archive.ubuntu.com/ubuntu/ hardy-updates main restricteddeb-src http://archive.ubuntu.com/ubuntu/ hardy-updates main restricted## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu## team, and may not be under a free licence. Please satisfy yourself as to## your rights to use the software. Also, please note that software in## universe WILL NOT receive any review or updates from the Ubuntu security## team.deb http://archive.ubuntu.com/ubuntu/ hardy universedeb-src http://archive.ubuntu.com/ubuntu/ hardy universedeb http://archive.ubuntu.com/ubuntu/ hardy-updates universedeb-src http://archive.ubuntu.com/ubuntu/ hardy-updates universe## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu ## team, and may not be under a free licence. Please satisfy yourself as to ## your rights to use the software. Also, please note that software in ## multiverse WILL NOT receive any review or updates from the Ubuntu## security team.deb http://archive.ubuntu.com/ubuntu/ hardy multiversedeb-src http://archive.ubuntu.com/ubuntu/ hardy multiversedeb http://archive.ubuntu.com/ubuntu/ hardy-updates multiversedeb-src http://archive.ubuntu.com/ubuntu/ hardy-updates multiverse## Uncomment the following two lines to add software from the 'backports'## repository.## N.B. software from this repository may not have been tested as## extensively as that contained in the main release, although it includes## newer versions of some applications which may provide useful features.## Also, please note that software in backports WILL NOT receive any review## or updates from the Ubuntu security team.# deb http://es.archive.ubuntu.com/ubuntu/ hardy-backports main restricted universe multiverse# deb-src http://es.archive.ubuntu.com/ubuntu/ hardy-backports main restricted universe multiverse## Uncomment the following two lines to add software from Canonical's## 'partner' repository. This software is not part of Ubuntu, but is## offered by Canonical and the respective vendors as a service to Ubuntu## users.deb http://archive.canonical.com/ubuntu hardy partnerdeb-src http://archive.canonical.com/ubuntu hardy partnerdeb http://archive.ubuntu.com/ubuntu/ hardy-security main restricteddeb-src http://archive.ubuntu.com/ubuntu/ hardy-security main restricteddeb http://archive.ubuntu.com/ubuntu/ hardy-security universedeb-src http://archive.ubuntu.com/ubuntu/ hardy-security universedeb http://archive.ubuntu.com/ubuntu/ hardy-security multiversedeb-src http://archive.ubuntu.com/ubuntu/ hardy-security multiverseifconfig:eth0 Link encap:Ethernet direcciónHW 00:14:2a:ed:9a:05 inet dirección:192.168.0.10 Difusión:192.168.0.255 Máscara:255.255.255.0 dirección inet6: fe80::214:2aff:feed:9a05/64 Alcance:Vínculo ARRIBA DIFUSIÓN CORRIENDO MULTICAST MTU:1500 Métrica:1 RX packets:3038 errors:0 dropped:0 overruns:0 frame:0 TX packets:3461 errors:0 dropped:0 overruns:0 carrier:0 colisiones:0 txqueuelen:1000 RX bytes:1148648 (1.0 MB) TX bytes:373164 (364.4 KB) Interrupción:20 Dirección base: 0xe800 lo Link encap:Bucle local inet dirección:127.0.0.1 Máscara:255.0.0.0 dirección inet6: ::1/128 Alcance:Anfitrión ARRIBA LOOPBACK CORRIENDO MTU:16436 Métrica:1 RX packets:12633 errors:0 dropped:0 overruns:0 frame:0 TX packets:12633 errors:0 dropped:0 overruns:0 carrier:0 colisiones:0 txqueuelen:0 RX bytes:965546 (942.9 KB) TX bytes:965546 (942.9 KB)pci:Jul 10 06:28:58 ripley-desktop kernel: [20124.006152] nautilus[6417]: segfault at 1d000020 eip b77342d6 esp bf94b550 error 4Jul 10 06:29:04 ripley-desktop kernel: [20130.822702] ip6_tables: (C) 2000-2006 Netfilter Core TeamJul 11 01:23:46 ripley-desktop kernel: Inspecting /boot/System.map-2.6.24-19-genericJul 11 01:23:46 ripley-desktop kernel: Loaded 27883 symbols from /boot/System.map-2.6.24-19-generic.Jul 11 01:23:46 ripley-desktop kernel: Symbols match kernel version 2.6.24.Jul 11 01:23:46 ripley-desktop kernel: Loaded 36321 symbols from 103 modules.Jul 11 01:23:46 ripley-desktop kernel: [ 0.000000] Initializing cgroup subsys cpusetJul 11 01:23:46 ripley-desktop kernel: [ 0.000000] Initializing cgroup subsys cpuJul 11 01:23:46 ripley-desktop kernel: [ 0.000000] Linux version 2.6.24-19-generic (buildd@palmer) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Wed Jun 18 14:43:41 UTC 2008 (Ubuntu 2.6.24-19.34-generic)Jul 11 01:23:46 ripley-desktop kernel: [ 0.000000] BIOS-provided physical RAM map:Jul 11 01:23:46 ripley-desktop kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)Jul 11 01:23:46 ripley-desktop kernel: [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)Jul 11 01:23:46 ripley-desktop kernel: [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)Jul 11 01:23:46 ripley-desktop kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 000000003ffc0000 (usable)Jul 11 01:23:46 ripley-desktop kernel: [ 0.000000] BIOS-e820: 000000003ffc0000 - 000000003ffce000 (ACPI data)Jul 11 01:23:46 ripley-desktop kernel: [ 0.000000] BIOS-e820: 000000003ffce000 - 0000000040000000 (ACPI NVS)Jul 11 01:23:46 ripley-desktop kernel: [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)Jul 11 01:23:46 ripley-desktop kernel: [ 0.000000] BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)Jul 11 01:23:46 ripley-desktop kernel: [ 0.000000] 127MB HIGHMEM available.Jul 11 01:23:46 ripley-desktop kernel: [ 0.000000] 896MB LOWMEM available.Jul 11 01:23:46 ripley-desktop kernel: [ 0.000000] found SMP MP-table at 000ff780Jul 11 01:23:46 ripley-desktop kernel: [ 0.000000] Entering add_active_range(0, 0, 262080) 0 entries of 256 usedJul 11 01:23:46 ripley-desktop kernel: [ 0.000000] Zone PFN ranges:Jul 11 01:23:46 ripley-desktop kernel: [ 0.000000] DMA 0 -> 4096Jul 11 01:23:46 ripley-desktop kernel: [ 0.000000] Normal 4096 -> 229376Jul 11 01:23:46 ripley-desktop kernel: [ 0.000000] HighMem 229376 -> 262080Jul 11 01:23:46 ripley-desktop kernel: [ 0.000000] Movable zone start PFN for each nodeJul 11 01:23:46 ripley-desktop kernel: [ 0.000000] early_node_map[1] active PFN rangesJul 11 01:23:46 ripley-desktop kernel: [ 0.000000] 0: 0 -> 262080Jul 11 01:23:46 ripley-desktop kernel: [ 0.000000] On node 0 totalpages: 262080Jul 11 01:23:46 ripley-desktop kernel: [ 0.000000] DMA zone: 32 pages used for memmapJul 11 01:23:46 ripley-desktop kernel: [ 0.000000] DMA zone: 0 pages reservedJul 11 01:23:46 ripley-desktop kernel: [ 0.000000] DMA zone: 4064 pages, LIFO batch:0Jul 11 01:23:46 ripley-desktop kernel: [ 0.000000] Normal zone: 1760 pages used for memmapJul 11 01:23:46 ripley-desktop kernel: [ 0.000000] Normal zone: 223520 pages, LIFO batch:31Jul 11 01:23:46 ripley-desktop kernel: [ 0.000000] HighMem zone: 255 pages used for memmapJul 11 01:23:46 ripley-desktop kernel: [ 0.000000] HighMem zone: 32449 pages, LIFO batch:7Jul 11 01:23:46 ripley-desktop kernel: [ 0.000000] Movable zone: 0 pages used for memmapJul 11 01:23:46 ripley-desktop kernel: [ 0.000000] DMI present.Jul 11 01:23:46 ripley-desktop kernel: [ 0.000000] ACPI: RSDP signature @ 0xC00F8AB0 checksum 0Jul 11 01:23:46 ripley-desktop kernel: [ 0.000000] ACPI: RSDP 000F8AB0, 0014 (r0 HP-CPC)Jul 11 01:23:46 ripley-desktop kernel: [ 0.000000] ACPI: RSDT 3FFC0000, 0034 (r1 HP-CPC OEMRSDT 1000718 MSFT 97)Jul 11 01:23:46 ripley-desktop kernel: [ 0.000000] ACPI: FACP 3FFC0200, 0084 (r2 HP-CPC OEMFACP 1000718 MSFT 97)Jul 11 01:23:46 ripley-desktop kernel: [ 0.000000] ACPI: DSDT 3FFC0440, 4AE6 (r1 HP-CPC OEMRSDT 0 INTL 20051117)Jul 11 01:23:46 ripley-desktop kernel: [ 0.000000] ACPI: FACS 3FFCE000, 0040Jul 11 01:23:46 ripley-desktop kernel: [ 0.000000] ACPI: APIC 3FFC0390, 006C (r1 HP-CPC OEMAPIC 1000718 MSFT 97)Jul 11 01:23:46 ripley-desktop kernel: [ 0.000000] ACPI: MCFG 3FFC0400, 003C (r1 HP-CPC OEMMCFG 1000718 MSFT 97)Jul 11 01:23:46 ripley-desktop kernel: [ 0.000000] ACPI: OEMB 3FFCE040, 0060 (r1 HP-CPC AMI_OEM 1000718 MSFT 97)Jul 11 01:23:46 ripley-desktop kernel: [ 0.000000] ATI board detected. Disabling timer routing over 8254.Jul 11 01:23:46 ripley-desktop kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x808Jul 11 01:23:46 ripley-desktop kernel: [ 0.000000] ACPI: Local APIC address 0xfee00000Jul 11 01:23:46 ripley-desktop kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)Jul 11 01:23:46 ripley-desktop kernel: [ 0.000000] Processor #0 15:4 APIC version 20Jul 11 01:23:46 ripley-desktop kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)Jul 11 01:23:46 ripley-desktop kernel: [ 0.000000] Processor #1 15:4 APIC version 20Jul 11 01:23:46 ripley-desktop kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)Jul 11 01:23:46 ripley-desktop kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)Jul 11 01:23:46 ripley-desktop kernel: [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])Jul 11 01:23:46 ripley-desktop kernel: [ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23Jul 11 01:23:46 ripley-desktop kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)Jul 11 01:23:46 ripley-desktop kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)Jul 11 01:23:46 ripley-desktop kernel: [ 0.000000] ACPI: IRQ0 used by override.Jul 11 01:23:46 ripley-desktop kernel: [ 0.000000] ACPI: IRQ2 used by override.Jul 11 01:23:46 ripley-desktop kernel: [ 0.000000] ACPI: IRQ9 used by override.Jul 11 01:23:46 ripley-desktop kernel: [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICsJul 11 01:23:46 ripley-desktop kernel: [ 0.000000] Using ACPI (MADT) for SMP configuration informationJul 11 01:23:46 ripley-desktop kernel: [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bee00000)Jul 11 01:23:46 ripley-desktop kernel: [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000Jul 11 01:23:46 ripley-desktop kernel: [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e4000Jul 11 01:23:46 ripley-desktop kernel: [ 0.000000] swsusp: Registered nosave memory region: 00000000000e4000 - 0000000000100000Jul 11 01:23:46 ripley-desktop kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260033Jul 11 01:23:46 ripley-desktop kernel: [ 0.000000] Kernel command line: root=UUID=487f0538-66ad-48ff-a172-884c19dc37c4 ro quiet splashJul 11 01:23:46 ripley-desktop kernel: [ 0.000000] mapped APIC to ffffb000 (fee00000)Jul 11 01:23:46 ripley-desktop kernel: [ 0.000000] mapped IOAPIC to ffffa000 (fec00000)Jul 11 01:23:46 ripley-desktop kernel: [ 0.000000] Enabling fast FPU save and restore... done.Jul 11 01:23:46 ripley-desktop kernel: [ 0.000000] Enabling unmasked SIMD FPU exception support... done.Jul 11 01:23:46 ripley-desktop kernel: [ 0.000000] Initializing CPU#0Jul 11 01:23:46 ripley-desktop kernel: [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)Jul 11 01:23:46 ripley-desktop kernel: [ 0.000000] Detected 3065.859 MHz processor.Jul 11 01:23:46 ripley-desktop kernel: [ 27.509115] Console: colour VGA+ 80x25Jul 11 01:23:46 ripley-desktop kernel: [ 27.509120] console [tty0] enabledJul 11 01:23:46 ripley-desktop kernel: [ 27.509805] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)Jul 11 01:23:46 ripley-desktop kernel: [ 27.510325] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)Jul 11 01:23:46 ripley-desktop kernel: [ 27.536934] Memory: 1026808k/1048320k available (2177k kernel code, 20900k reserved, 1006k data, 368k init, 130816k highmem)Jul 11 01:23:46 ripley-desktop kernel: [ 27.536945] virtual kernel memory layout:Jul 11 01:23:46 ripley-desktop kernel: [ 27.536946] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB)Jul 11 01:23:46 ripley-desktop kernel: [ 27.536947] pkmap : 0xff800000 - 0xffc00000 (4096 kB)Jul 11 01:23:46 ripley-desktop kernel: [ 27.536948] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)Jul 11 01:23:46 ripley-desktop kernel: [ 27.536949] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)Jul 11 01:23:46 ripley-desktop kernel: [ 27.536950] .init : 0xc0421000 - 0xc047d000 ( 368 kB)Jul 11 01:23:46 ripley-desktop kernel: [ 27.536951] .data : 0xc0320434 - 0xc041bdc4 (1006 kB)Jul 11 01:23:46 ripley-desktop kernel: [ 27.536952] .text : 0xc0100000 - 0xc0320434 (2177 kB)Jul 11 01:23:46 ripley-desktop kernel: [ 27.536955] Checking if this processor honours the WP bit even in supervisor mode... Ok.Jul 11 01:23:46 ripley-desktop kernel: [ 27.537017] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1Jul 11 01:23:46 ripley-desktop kernel: [ 27.617052] Calibrating delay using timer specific routine.. 6139.51 BogoMIPS (lpj=12279031)Jul 11 01:23:46 ripley-desktop kernel: [ 27.617087] Security Framework initializedJul 11 01:23:46 ripley-desktop kernel: [ 27.617096] SELinux: Disabled at boot.Jul 11 01:23:46 ripley-desktop kernel: [ 27.617117] AppArmor: AppArmor initializedJul 11 01:23:46 ripley-desktop kernel: [ 27.617122] Failure registering capabilities with primary security module.Jul 11 01:23:46 ripley-desktop kernel: [ 27.617131] Mount-cache hash table entries: 512Jul 11 01:23:46 ripley-desktop kernel: [ 27.617294] Initializing cgroup subsys nsJul 11 01:23:46 ripley-desktop kernel: [ 27.617300] Initializing cgroup subsys cpuacctJul 11 01:23:46 ripley-desktop kernel: [ 27.617316] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000651d 00000000 00000001 00000000Jul 11 01:23:46 ripley-desktop kernel: [ 27.617326] monitor/mwait feature present.Jul 11 01:23:46 ripley-desktop kernel: [ 27.617328] using mwait in idle threads.Jul 11 01:23:46 ripley-desktop kernel: [ 27.617335] CPU: Trace cache: 12K uops, L1 D cache: 16KJul 11 01:23:46 ripley-desktop kernel: [ 27.617337] CPU: L2 cache: 1024KJul 11 01:23:46 ripley-desktop kernel: [ 27.617340] CPU: Physical Processor ID: 0Jul 11 01:23:46 ripley-desktop kernel: [ 27.617343] CPU: After all inits, caps: bfebfbff 20100000 00000000 0000b180 0000651d 00000000 00000001 00000000Jul 11 01:23:46 ripley-desktop kernel: [ 27.617354] Compat vDSO mapped to ffffe000.Jul 11 01:23:46 ripley-desktop kernel: [ 27.617374] Checking 'hlt' instruction... OK.Jul 11 01:23:46 ripley-desktop kernel: [ 27.633573] SMP alternatives: switching to UP codeJul 11 01:23:46 ripley-desktop kernel: [ 27.635602] Early unpacking initramfs... doneJul 11 01:23:46 ripley-desktop kernel: [ 27.939273] ACPI: Core revision 20070126Jul 11 01:23:46 ripley-desktop kernel: [ 27.939340] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.Jul 11 01:23:46 ripley-desktop kernel: [ 27.942197] CPU0: Intel(R) Pentium(R) 4 CPU 3.06GHz stepping 09Jul 11 01:23:46 ripley-desktop kernel: [ 27.942219] SMP alternatives: switching to SMP codeJul 11 01:23:46 ripley-desktop kernel: [ 27.943102] Booting processor 1/1 eip 3000Jul 11 01:23:46 ripley-desktop kernel: [ 28.290828] Initializing CPU#1Jul 11 01:23:46 ripley-desktop kernel: [ 28.370542] Calibrating delay using timer specific routine.. 6132.04 BogoMIPS (lpj=12264096)Jul 11 01:23:46 ripley-desktop kernel: [ 28.370554] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000651d 00000000 00000001 00000000Jul 11 01:23:46 ripley-desktop kernel: [ 28.370562] monitor/mwait feature present.Jul 11 01:23:46 ripley-desktop kernel: [ 28.370569] CPU: Trace cache: 12K uops, L1 D cache: 16KJul 11 01:23:46 ripley-desktop kernel: [ 28.370572] CPU: L2 cache: 1024KJul 11 01:23:46 ripley-desktop kernel: [ 28.370574] CPU: Physical Processor ID: 0Jul 11 01:23:46 ripley-desktop kernel: [ 28.370577] CPU: After all inits, caps: bfebfbff 20100000 00000000 0000b180 0000651d 00000000 00000001 00000000Jul 11 01:23:46 ripley-desktop kernel: [ 28.033476] CPU1: Intel(R) Pentium(R) 4 CPU 3.06GHz stepping 09Jul 11 01:23:46 ripley-desktop kernel: [ 28.033521] Total of 2 processors activated (12271.56 BogoMIPS).Jul 11 01:23:46 ripley-desktop kernel: [ 28.033702] ENABLING IO-APIC IRQsJul 11 01:23:46 ripley-desktop kernel: [ 28.033898] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1Jul 11 01:23:46 ripley-desktop kernel: [ 28.073640] ..MP-BIOS bug: 8254 timer not connected to IO-APICJul 11 01:23:46 ripley-desktop kernel: [ 28.073703] ...trying to set up timer (IRQ0) through the 8259A ... failed.Jul 11 01:23:46 ripley-desktop kernel: [ 28.073707] ...trying to set up timer as Virtual Wire IRQ... works.Jul 11 01:23:46 ripley-desktop kernel: [ 28.221229] checking TSC synchronization [CPU#0 -> CPU#1]:Jul 11 01:23:46 ripley-desktop kernel: [ 28.241235] Measured 1034666811 cycles TSC warp between CPUs, turning off TSC clock.Jul 11 01:23:46 ripley-desktop kernel: [ 28.241239] Marking TSC unstable due to: check_tsc_sync_source failed.Jul 11 01:23:46 ripley-desktop kernel: [ 28.241254] Brought up 2 CPUsJul 11 01:23:46 ripley-desktop kernel: [ 28.241281] CPU0 attaching sched-domain:Jul 11 01:23:46 ripley-desktop kernel: [ 28.241284] domain 0: span 03Jul 11 01:23:46 ripley-desktop kernel: [ 28.241287] groups: 01 02Jul 11 01:23:46 ripley-desktop kernel: [ 28.241291] domain 1: span 03Jul 11 01:23:46 ripley-desktop kernel: [ 28.241293] groups: 03Jul 11 01:23:46 ripley-desktop kernel: [ 28.241296] CPU1 attaching sched-domain:Jul 11 01:23:46 ripley-desktop kernel: [ 28.241298] domain 0: span 03Jul 11 01:23:46 ripley-desktop kernel: [ 28.241300] groups: 02 01Jul 11 01:23:46 ripley-desktop kernel: [ 28.241303] domain 1: span 03Jul 11 01:23:46 ripley-desktop kernel: [ 28.241305] groups: 03Jul 11 01:23:46 ripley-desktop kernel: [ 28.579077] net_namespace: 64 bytesJul 11 01:23:46 ripley-desktop kernel: [ 28.579089] Booting paravirtualized kernel on bare hardwareJul 11 01:23:46 ripley-desktop kernel: [ 28.579704] Time: 23:23:09 Date: 07/10/08Jul 11 01:23:46 ripley-desktop kernel: [ 28.579737] NET: Registered protocol family 16Jul 11 01:23:46 ripley-desktop kernel: [ 28.580006] EISA bus registeredJul 11 01:23:46 ripley-desktop kernel: [ 28.580013] ACPI: bus type pci registeredJul 11 01:23:46 ripley-desktop kernel: [ 28.580260] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=2Jul 11 01:23:46 ripley-desktop kernel: [ 28.580263] PCI: Using configuration type 1Jul 11 01:23:46 ripley-desktop kernel: [ 28.580280] Setting up standard PCI resourcesJul 11 01:23:46 ripley-desktop kernel: [ 28.596004] ACPI: EC: Look up EC in DSDTJul 11 01:23:46 ripley-desktop kernel: [ 28.602004] ACPI: Interpreter enabledJul 11 01:23:46 ripley-desktop kernel: [ 28.602008] ACPI: (supports S0 S1 S3 S4 S5)Jul 11 01:23:46 ripley-desktop kernel: [ 28.602028] ACPI: Using IOAPIC for interrupt routingJul 11 01:23:46 ripley-desktop kernel: [ 28.612333] ACPI: PCI Root Bridge [PCI0] (0000:00)Jul 11 01:23:46 ripley-desktop kernel: [ 28.613989] PCI: Transparent bridge - 0000:00:14.4Jul 11 01:23:46 ripley-desktop kernel: [ 28.614030] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]Jul 11 01:23:46 ripley-desktop kernel: [ 28.614158] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]Jul 11 01:23:46 ripley-desktop kernel: [ 28.614297] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]Jul 11 01:23:46 ripley-desktop kernel: [ 28.620442] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.Jul 11 01:23:46 ripley-desktop kernel: [ 28.620567] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.Jul 11 01:23:46 ripley-desktop kernel: [ 28.620690] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.Jul 11 01:23:46 ripley-desktop kernel: [ 28.620810] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.Jul 11 01:23:46 ripley-desktop kernel: [ 28.620939] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.Jul 11 01:23:46 ripley-desktop kernel: [ 28.621060] ACPI: PCI Interrupt Link [LNKF] (IRQs 9) *0, disabled.Jul 11 01:23:46 ripley-desktop kernel: [ 28.621179] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.Jul 11 01:23:46 ripley-desktop kernel: [ 28.621303] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.Jul 11 01:23:46 ripley-desktop kernel: [ 28.621463] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - ED, should be E9 [20070126]Jul 11 01:23:46 ripley-desktop kernel: [ 28.621470] Linux Plug and Play Support v0.97 (c) Adam BelayJul 11 01:23:46 ripley-desktop kernel: [ 28.621512] pnp: PnP ACPI initJul 11 01:23:46 ripley-desktop kernel: [ 28.621523] ACPI: bus type pnp registeredJul 11 01:23:46 ripley-desktop kernel: [ 28.627837] pnp: PnP ACPI: found 13 devicesJul 11 01:23:46 ripley-desktop kernel: [ 28.627840] ACPI: ACPI bus type pnp unregisteredJul 11 01:23:46 ripley-desktop kernel: [ 28.627846] PnPBIOS: Disabled by ACPI PNPJul 11 01:23:46 ripley-desktop kernel: [ 28.628156] PCI: Using ACPI for IRQ routingJul 11 01:23:46 ripley-desktop kernel: [ 28.628160] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a reportJul 11 01:23:46 ripley-desktop kernel: [ 28.628170] PCI: Cannot allocate resource region 3 of device 0000:00:00.0Jul 11 01:23:46 ripley-desktop kernel: [ 28.650802] NET: Registered protocol family 8Jul 11 01:23:46 ripley-desktop kernel: [ 28.650805] NET: Registered protocol family 20Jul 11 01:23:46 ripley-desktop kernel: [ 28.650887] AppArmor: AppArmor Filesystem EnabledJul 11 01:23:46 ripley-desktop kernel: [ 28.666911] system 00:06: ioport range 0x4d0-0x4d1 has been reservedJul 11 01:23:46 ripley-desktop kernel: [ 28.666914] system 00:06: ioport range 0x40b-0x40b has been reservedJul 11 01:23:46 ripley-desktop kernel: [ 28.666917] system 00:06: ioport range 0x4d6-0x4d6 has been reservedJul 11 01:23:46 ripley-desktop kernel: [ 28.666919] system 00:06: ioport range 0xc00-0xc01 has been reservedJul 11 01:23:46 ripley-desktop kernel: [ 28.666922] system 00:06: ioport range 0xc14-0xc14 has been reservedJul 11 01:23:46 ripley-desktop kernel: [ 28.666924] system 00:06: ioport range 0xc50-0xc51 has been reservedJul 11 01:23:46 ripley-desktop kernel: [ 28.666926] system 00:06: ioport range 0xc52-0xc52 has been reservedJul 11 01:23:46 ripley-desktop kernel: [ 28.666929] system 00:06: ioport range 0xc6c-0xc6c has been reservedJul 11 01:23:46 ripley-desktop kernel: [ 28.666931] system 00:06: ioport range 0xc6f-0xc6f has been reservedJul 11 01:23:46 ripley-desktop kernel: [ 28.666934] system 00:06: ioport range 0xcd4-0xcd5 has been reservedJul 11 01:23:46 ripley-desktop kernel: [ 28.666936] system 00:06: ioport range 0xcd6-0xcd7 has been reservedJul 11 01:23:46 ripley-desktop kernel: [ 28.666939] system 00:06: ioport range 0xcd8-0xcdf has been reservedJul 11 01:23:46 ripley-desktop kernel: [ 28.666941] system 00:06: ioport range 0x800-0x89f has been reservedJul 11 01:23:46 ripley-desktop kernel: [ 28.666944] system 00:06: ioport range 0x900-0x90f has been reservedJul 11 01:23:46 ripley-desktop kernel: [ 28.666946] system 00:06: ioport range 0x910-0x91f has been reservedJul 11 01:23:46 ripley-desktop kernel: [ 28.666949] system 00:06: ioport range 0x8200-0x821f has been reservedJul 11 01:23:46 ripley-desktop kernel: [ 28.666951] system 00:06: ioport range 0xfe00-0xfefe has been reservedJul 11 01:23:46 ripley-desktop kernel: [ 28.666955] system 00:06: iomem range 0xffb80000-0xffbfffff could not be reservedJul 11 01:23:46 ripley-desktop kernel: [ 28.666958] system 00:06: iomem range 0xfff80000-0xffffffff could not be reservedJul 11 01:23:46 ripley-desktop kernel: [ 28.666966] system 00:09: ioport range 0xa00-0xa0f has been reservedJul 11 01:23:46 ripley-desktop kernel: [ 28.666969] system 00:09: ioport range 0xa10-0xa1f has been reservedJul 11 01:23:46 ripley-desktop kernel: [ 28.666972] system 00:09: ioport range 0xa20-0xa2f has been reservedJul 11 01:23:46 ripley-desktop kernel: [ 28.666974] system 00:09: ioport range 0xa30-0xa3f has been reservedJul 11 01:23:46 ripley-desktop kernel: [ 28.666980] system 00:0a: iomem range 0xfec00000-0xfec00fff has been reservedJul 11 01:23:46 ripley-desktop kernel: [ 28.666983] system 00:0a: iomem range 0xfee00000-0xfee00fff could not be reservedJul 11 01:23:46 ripley-desktop kernel: [ 28.666989] system 00:0b: iomem range 0xe0000000-0xefffffff has been reservedJul 11 01:23:46 ripley-desktop kernel: [ 28.666995] system 00:0c: iomem range 0x0-0x9ffff could not be reservedJul 11 01:23:46 ripley-desktop kernel: [ 28.666998] system 00:0c: iomem range 0x0-0x0 could not be reservedJul 11 01:23:46 ripley-desktop kernel: [ 28.667001] system 00:0c: iomem range 0xe0000-0xfffff could not be reservedJul 11 01:23:46 ripley-desktop kernel: [ 28.667003] system 00:0c: iomem range 0x100000-0x3fffffff could not be reservedJul 11 01:23:46 ripley-desktop kernel: [ 28.667006] system 00:0c: iomem range 0x0-0x0 could not be reservedJul 11 01:23:46 ripley-desktop kernel: [ 28.697576] PCI: Bridge: 0000:00:02.0Jul 11 01:23:46 ripley-desktop kernel: [ 28.697579] IO window: disabled.Jul 11 01:23:46 ripley-desktop kernel: [ 28.697583] MEM window: fc000000-feafffffJul 11 01:23:46 ripley-desktop kernel: [ 28.697588] PREFETCH window: d0000000-dfffffffJul 11 01:23:46 ripley-desktop kernel: [ 28.697593] PCI: Bridge: 0000:00:14.4Jul 11 01:23:46 ripley-desktop kernel: [ 28.697596] IO window: e000-efffJul 11 01:23:46 ripley-desktop kernel: [ 28.697604] MEM window: feb00000-febfffffJul 11 01:23:46 ripley-desktop kernel: [ 28.697610] PREFETCH window: disabled.Jul 11 01:23:46 ripley-desktop kernel: [ 28.697634] PCI: Setting latency timer of device 0000:00:02.0 to 64Jul 11 01:23:46 ripley-desktop kernel: [ 28.697655] NET: Registered protocol family 2Jul 11 01:23:46 ripley-desktop kernel: [ 28.361229] Time: acpi_pm clocksource has been installed.Jul 11 01:23:46 ripley-desktop kernel: [ 28.361259] Switched to high resolution mode on CPU 0Jul 11 01:23:46 ripley-desktop kernel: [ 28.698882] Switched to high resolution mode on CPU 1Jul 11 01:23:46 ripley-desktop kernel: [ 28.731776] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)Jul 11 01:23:46 ripley-desktop kernel: [ 28.732148] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)Jul 11 01:23:46 ripley-desktop kernel: [ 28.732842] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)Jul 11 01:23:46 ripley-desktop kernel: [ 28.733503] TCP: Hash tables configured (established 131072 bind 65536)Jul 11 01:23:46 ripley-desktop kernel: [ 28.733506] TCP reno registeredJul 11 01:23:46 ripley-desktop kernel: [ 28.743921] checking if image is initramfs... it isJul 11 01:23:46 ripley-desktop kernel: [ 29.344320] Freeing initrd memory: 7727k freedJul 11 01:23:46 ripley-desktop kernel: [ 29.345394] audit: initializing netlink socket (disabled)Jul 11 01:23:46 ripley-desktop kernel: [ 29.345414] audit(1215732190.312:1): initializedJul 11 01:23:46 ripley-desktop kernel: [ 29.345652] highmem bounce pool size: 64 pagesJul 11 01:23:46 ripley-desktop kernel: [ 29.348238] VFS: Disk quotas dquot_6.5.1Jul 11 01:23:46 ripley-desktop kernel: [ 29.348339] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)Jul 11 01:23:46 ripley-desktop kernel: [ 29.348507] io scheduler noop registeredJul 11 01:23:46 ripley-desktop kernel: [ 29.348510] io scheduler anticipatory registeredJul 11 01:23:46 ripley-desktop kernel: [ 29.348512] io scheduler deadline registeredJul 11 01:23:46 ripley-desktop kernel: [ 29.348523] io scheduler cfq registered (default)Jul 11 01:23:46 ripley-desktop kernel: [ 29.348533] PCI: MSI quirk detected. MSI deactivated.Jul 11 01:23:46 ripley-desktop kernel: [ 29.434729] Boot video device is 0000:01:00.0Jul 11 01:23:46 ripley-desktop kernel: [ 29.434873] PCI: Setting latency timer of device 0000:00:02.0 to 64Jul 11 01:23:46 ripley-desktop kernel: [ 29.434918] assign_interrupt_mode Found MSI capabilityJul 11 01:23:46 ripley-desktop kernel: [ 29.434921] Allocate Port Service[0000:00:02.0:pcie00]Jul 11 01:23:46 ripley-desktop kernel: [ 29.435255] isapnp: Scanning for PnP cards...Jul 11 01:23:46 ripley-desktop kernel: [ 29.786967] isapnp: No Plug & Play device foundJul 11 01:23:46 ripley-desktop kernel: [ 29.488588] Real Time Clock Driver v1.12acJul 11 01:23:46 ripley-desktop kernel: [ 29.488732] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabledJul 11 01:23:46 ripley-desktop kernel: [ 29.490697] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksizeJul 11 01:23:46 ripley-desktop kernel: [ 29.490784] input: Macintosh mouse button emulation as /devices/virtual/input/input0Jul 11 01:23:46 ripley-desktop kernel: [ 29.490924] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12Jul 11 01:23:46 ripley-desktop kernel: [ 29.493112] serio: i8042 KBD port at 0x60,0x64 irq 1Jul 11 01:23:46 ripley-desktop kernel: [ 29.493119] serio: i8042 AUX port at 0x60,0x64 irq 12Jul 11 01:23:46 ripley-desktop kernel: [ 29.854758] mice: PS/2 mouse device common for all miceJul 11 01:23:46 ripley-desktop kernel: [ 29.854922] EISA: Probing bus 0 at eisa.0Jul 11 01:23:46 ripley-desktop kernel: [ 29.854943] Cannot allocate resource for EISA slot 3Jul 11 01:23:46 ripley-desktop kernel: [ 29.854945] Cannot allocate resource for EISA slot 4Jul 11 01:23:46 ripley-desktop kernel: [ 29.854948] Cannot allocate resource for EISA slot 5Jul 11 01:23:46 ripley-desktop kernel: [ 29.854950] Cannot allocate resource for EISA slot 6Jul 11 01:23:46 ripley-desktop kernel: [ 29.854952] Cannot allocate resource for EISA slot 7Jul 11 01:23:46 ripley-desktop kernel: [ 29.854954] Cannot allocate resource for EISA slot 8Jul 11 01:23:46 ripley-desktop kernel: [ 29.854956] EISA: Detected 0 cards.Jul 11 01:23:46 ripley-desktop kernel: [ 29.854960] cpuidle: using governor ladderJul 11 01:23:46 ripley-desktop kernel: [ 29.854962] cpuidle: using governor menuJul 11 01:23:46 ripley-desktop kernel: [ 29.855055] NET: Registered protocol family 1Jul 11 01:23:46 ripley-desktop kernel: [ 29.855087] Using IPI No-Shortcut modeJul 11 01:23:46 ripley-desktop kernel: [ 29.855122] registered taskstats version 1Jul 11 01:23:46 ripley-desktop kernel: [ 29.855241] Magic number: 0:22:403Jul 11 01:23:46 ripley-desktop kernel: [ 29.855406] BIOS EDD facility v0.16 2004-Jun-25, 0 devices foundJul 11 01:23:46 ripley-desktop kernel: [ 29.855408] EDD information not available.Jul 11 01:23:46 ripley-desktop kernel: [ 29.855755] Freeing unused kernel memory: 368k freedJul 11 01:23:46 ripley-desktop kernel: [ 29.543095] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1Jul 11 01:23:46 ripley-desktop kernel: [ 30.765001] fuse init (API version 7.9)Jul 11 01:23:46 ripley-desktop kernel: [ 30.790565] ACPI: duty_cycle spans bit 4Jul 11 01:23:46 ripley-desktop kernel: [ 30.790814] ACPI: duty_cycle spans bit 4Jul 11 01:23:46 ripley-desktop kernel: [ 30.790838] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126]Jul 11 01:23:46 ripley-desktop kernel: [ 30.790853] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126]Jul 11 01:23:46 ripley-desktop kernel: [ 31.309343] SCSI subsystem initializedJul 11 01:23:46 ripley-desktop kernel: [ 31.371723] usbcore: registered new interface driver usbfsJul 11 01:23:46 ripley-desktop kernel: [ 31.371760] usbcore: registered new interface driver hubJul 11 01:23:46 ripley-desktop kernel: [ 31.382219] libata version 3.00 loaded.Jul 11 01:23:46 ripley-desktop kernel: [ 31.395550] usbcore: registered new device driver usbJul 11 01:23:46 ripley-desktop kernel: [ 31.396416] sata_sil 0000:00:11.0: version 2.3Jul 11 01:23:46 ripley-desktop kernel: [ 31.396492] ACPI: PCI Interrupt 0000:00:11.0[A] -> GSI 23 (level, low) -> IRQ 16Jul 11 01:23:46 ripley-desktop kernel: [ 31.405590] scsi0 : sata_silJul 11 01:23:46 ripley-desktop kernel: [ 31.431531] scsi1 : sata_silJul 11 01:23:46 ripley-desktop kernel: [ 31.431888] ata1: SATA max UDMA/100 mmio m512@0xfbfff000 tf 0xfbfff080 irq 16Jul 11 01:23:46 ripley-desktop kernel: [ 31.431895] ata2: SATA max UDMA/100 mmio m512@0xfbfff000 tf 0xfbfff0c0 irq 16Jul 11 01:23:46 ripley-desktop kernel: [ 31.440018] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) DriverJul 11 01:23:46 ripley-desktop kernel: [ 31.776667] 8139too Fast Ethernet driver 0.9.28Jul 11 01:23:46 ripley-desktop kernel: [ 31.899561] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)Jul 11 01:23:46 ripley-desktop kernel: [ 32.080055] ata1.00: ATAPI: LITE-ON DVDRW LH-20A1S, 9L09, max UDMA/100Jul 11 01:23:46 ripley-desktop kernel: [ 32.267966] ata1.00: configured for UDMA/100Jul 11 01:23:46 ripley-desktop kernel: [ 32.578426] ata2: SATA link down (SStatus 0 SControl 310)Jul 11 01:23:46 ripley-desktop kernel: [ 32.242250] scsi 0:0:0:0: CD-ROM LITE-ON DVDRW LH-20A1S 9L09 PQ: 0 ANSI: 5Jul 11 01:23:46 ripley-desktop kernel: [ 32.242451] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) -> IRQ 17Jul 11 01:23:46 ripley-desktop kernel: [ 32.242572] scsi2 : sata_silJul 11 01:23:46 ripley-desktop kernel: [ 32.242650] scsi3 : sata_silJul 11 01:23:46 ripley-desktop kernel: [ 32.242984] ata3: SATA max UDMA/100 mmio m512@0xfbfff800 tf 0xfbfff880 irq 17Jul 11 01:23:46 ripley-desktop kernel: [ 32.242991] ata4: SATA max UDMA/100 mmio m512@0xfbfff800 tf 0xfbfff8c0 irq 17Jul 11 01:23:46 ripley-desktop kernel: [ 32.552929] ata3: SATA link down (SStatus 0 SControl 310)Jul 11 01:23:46 ripley-desktop kernel: [ 32.864902] ata4: SATA link down (SStatus 0 SControl 310)Jul 11 01:23:46 ripley-desktop kernel: [ 32.865018] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 18Jul 11 01:23:46 ripley-desktop kernel: [ 32.865095] PCI: Setting latency timer of device 0000:00:14.1 to 64Jul 11 01:23:46 ripley-desktop kernel: [ 32.865182] scsi4 : pata_atiixpJul 11 01:23:46 ripley-desktop kernel: [ 32.865264] scsi5 : pata_atiixpJul 11 01:23:46 ripley-desktop kernel: [ 32.866840] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14Jul 11 01:23:46 ripley-desktop kernel: [ 32.866844] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15Jul 11 01:23:46 ripley-desktop kernel: [ 33.561411] ata6.00: ATAPI: TSSTcorpCD/DVDW TS-H552D, hp07, max UDMA/33Jul 11 01:23:46 ripley-desktop kernel: [ 33.561441] ata6.01: ATAPI: TSSTcorpDVD-ROM TS-H352C, HP02, max UDMA/33Jul 11 01:23:46 ripley-desktop kernel: [ 33.773360] ata6.00: configured for UDMA/33Jul 11 01:23:46 ripley-desktop kernel: [ 33.961354] ata6.01: configured for UDMA/33Jul 11 01:23:46 ripley-desktop kernel: [ 33.962640] scsi 5:0:0:0: CD-ROM TSSTcorp CD/DVDW TS-H552D hp07 PQ: 0 ANSI: 5Jul 11 01:23:46 ripley-desktop kernel: [ 33.963370] scsi 5:0:1:0: CD-ROM TSSTcorp DVD-ROM TS-H352C HP02 PQ: 0 ANSI: 5Jul 11 01:23:46 ripley-desktop kernel: [ 34.301261] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 19Jul 11 01:23:46 ripley-desktop kernel: [ 34.301282] ohci_hcd 0000:00:13.0: OHCI Host ControllerJul 11 01:23:46 ripley-desktop kernel: [ 34.301616] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1Jul 11 01:23:46 ripley-desktop kernel: [ 34.301649] ohci_hcd 0000:00:13.0: irq 19, io mem 0xfbffe000Jul 11 01:23:46 ripley-desktop kernel: [ 34.359443] usb usb1: configuration #1 chosen from 1 choiceJul 11 01:23:46 ripley-desktop kernel: [ 34.359486] hub 1-0:1.0: USB hub foundJul 11 01:23:46 ripley-desktop kernel: [ 34.359499] hub 1-0:1.0: 4 ports detectedJul 11 01:23:46 ripley-desktop kernel: [ 34.462414] ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 19Jul 11 01:23:46 ripley-desktop kernel: [ 34.462441] ohci_hcd 0000:00:13.1: OHCI Host ControllerJul 11 01:23:46 ripley-desktop kernel: [ 34.462483] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2Jul 11 01:23:46 ripley-desktop kernel: [ 34.462505] ohci_hcd 0000:00:13.1: irq 19, io mem 0xfbffd000Jul 11 01:23:46 ripley-desktop kernel: [ 34.522425] usb usb2: configuration #1 chosen from 1 choiceJul 11 01:23:46 ripley-desktop kernel: [ 34.522464] hub 2-0:1.0: USB hub foundJul 11 01:23:46 ripley-desktop kernel: [ 34.522478] hub 2-0:1.0: 4 ports detectedJul 11 01:23:46 ripley-desktop kernel: [ 34.285476] ACPI: PCI Interrupt 0000:02:05.0[A] -> GSI 20 (level, low) -> IRQ 20Jul 11 01:23:46 ripley-desktop kernel: [ 34.623116] ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 19Jul 11 01:23:46 ripley-desktop kernel: [ 34.623158] ehci_hcd 0000:00:13.2: EHCI Host ControllerJul 11 01:23:46 ripley-desktop kernel: [ 34.623343] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3Jul 11 01:23:46 ripley-desktop kernel: [ 34.623496] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfbffc000Jul 11 01:23:46 ripley-desktop kernel: [ 34.286848] eth0: RealTek RTL8139 at 0xe800, 00:14:2a:ed:9a:05, IRQ 20Jul 11 01:23:46 ripley-desktop kernel: [ 34.286851] eth0: Identified 8139 chip type 'RTL-8100B/8139D'Jul 11 01:23:46 ripley-desktop kernel: [ 34.628041] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)Jul 11 01:23:46 ripley-desktop kernel: [ 34.412765] usb 1-2: new full speed USB device using ohci_hcd and address 2Jul 11 01:23:46 ripley-desktop kernel: [ 34.763242] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004Jul 11 01:23:46 ripley-desktop kernel: [ 34.763415] usb usb3: configuration #1 chosen from 1 choiceJul 11 01:23:46 ripley-desktop kernel: [ 34.763457] hub 3-0:1.0: USB hub foundJul 11 01:23:46 ripley-desktop kernel: [ 34.763468] hub 3-0:1.0: 8 ports detectedJul 11 01:23:46 ripley-desktop kernel: [ 34.867543] ACPI: PCI Interrupt 0000:02:06.0[A] -> GSI 23 (level, low) -> IRQ 16Jul 11 01:23:46 ripley-desktop kernel: [ 34.920367] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[febff000-febff7ff] Max Packet=[2048] IR/IT contexts=[4/8]Jul 11 01:23:46 ripley-desktop kernel: [ 34.600623] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2Jul 11 01:23:46 ripley-desktop kernel: [ 34.600632] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xxJul 11 01:23:46 ripley-desktop kernel: [ 34.954481] Driver 'sr' needs updating - please use bus_type methodsJul 11 01:23:46 ripley-desktop kernel: [ 34.625185] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda trayJul 11 01:23:46 ripley-desktop kernel: [ 34.625191] Uniform CD-ROM driver Revision: 3.20Jul 11 01:23:46 ripley-desktop kernel: [ 34.625266] sr 0:0:0:0: Attached scsi CD-ROM sr0Jul 11 01:23:46 ripley-desktop kernel: [ 34.636928] sr1: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda trayJul 11 01:23:46 ripley-desktop kernel: [ 34.636988] sr 5:0:0:0: Attached scsi CD-ROM sr1Jul 11 01:23:46 ripley-desktop kernel: [ 34.640283] sr2: scsi3-mmc drive: 40x/40x cd/rw xa/form2 cdda trayJul 11 01:23:46 ripley-desktop kernel: [ 34.640336] sr 5:0:1:0: Attached scsi CD-ROM sr2Jul 11 01:23:46 ripley-desktop kernel: [ 34.651036] sr 0:0:0:0: Attached scsi generic sg0 type 5Jul 11 01:23:46 ripley-desktop kernel: [ 34.651072] sr 5:0:0:0: Attached scsi generic sg1 type 5Jul 11 01:23:46 ripley-desktop kernel: [ 34.651107] sr 5:0:1:0: Attached scsi generic sg2 type 5Jul 11 01:23:46 ripley-desktop kernel: [ 35.104707] usb 3-2: new high speed USB device using ehci_hcd and address 2Jul 11 01:23:46 ripley-desktop kernel: [ 35.239200] usb 3-2: configuration #1 chosen from 1 choiceJul 11 01:23:46 ripley-desktop kernel: [ 35.476678] usb 3-3: new high speed USB device using ehci_hcd and address 3Jul 11 01:23:46 ripley-desktop kernel: [ 35.620995] usb 3-3: configuration #1 chosen from 1 choiceJul 11 01:23:46 ripley-desktop kernel: [ 35.860821] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00000ae6ff46de66]Jul 11 01:23:46 ripley-desktop kernel: [ 36.202239] usbcore: registered new interface driver libusualJul 11 01:23:46 ripley-desktop kernel: [ 35.871848] Initializing USB Mass Storage driver...Jul 11 01:23:46 ripley-desktop kernel: [ 36.168623] usb 2-4: new full speed USB device using ohci_hcd and address 2Jul 11 01:23:46 ripley-desktop kernel: [ 36.377843] usb 2-4: configuration #1 chosen from 1 choiceJul 11 01:23:46 ripley-desktop kernel: [ 36.380025] scsi6 : SCSI emulation for USB Mass Storage devicesJul 11 01:23:46 ripley-desktop kernel: [ 36.380155] usb-storage: device found at 2Jul 11 01:23:46 ripley-desktop kernel: [ 36.380159] usb-storage: waiting for device to settle before scanningJul 11 01:23:46 ripley-desktop kernel: [ 36.380209] scsi7 : SCSI emulation for USB Mass Storage devicesJul 11 01:23:46 ripley-desktop kernel: [ 36.380304] usbcore: registered new interface driver usb-storageJul 11 01:23:46 ripley-desktop kernel: [ 36.380311] USB Mass Storage support registered.Jul 11 01:23:46 ripley-desktop kernel: [ 36.380503] usb-storage: device found at 2Jul 11 01:23:46 ripley-desktop kernel: [ 36.380506] usb-storage: waiting for device to settle before scanningJul 11 01:23:46 ripley-desktop kernel: [ 41.376401] usb-storage: device scan completeJul 11 01:23:46 ripley-desktop kernel: [ 41.376652] usb-storage: device scan completeJul 11 01:23:46 ripley-desktop kernel: [ 41.720100] scsi 7:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0Jul 11 01:23:46 ripley-desktop kernel: [ 41.726092] scsi 7:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0Jul 11 01:23:46 ripley-desktop kernel: [ 41.732098] scsi 7:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0Jul 11 01:23:46 ripley-desktop kernel: [ 41.738099] scsi 7:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0Jul 11 01:23:46 ripley-desktop kernel: [ 41.749239] scsi 6:0:0:0: Direct-Access ST350063 0A 3.AA PQ: 0 ANSI: 0Jul 11 01:23:46 ripley-desktop kernel: [ 41.749683] scsi 6:0:0:0: Attached scsi generic sg3 type 0Jul 11 01:23:46 ripley-desktop kernel: [ 41.749806] scsi 7:0:0:0: Attached scsi generic sg4 type 0Jul 11 01:23:46 ripley-desktop kernel: [ 41.749907] scsi 7:0:0:1: Attached scsi generic sg5 type 0Jul 11 01:23:46 ripley-desktop kernel: [ 41.750012] scsi 7:0:0:2: Attached scsi generic sg6 type 0Jul 11 01:23:46 ripley-desktop kernel: [ 41.750127] scsi 7:0:0:3: Attached scsi generic sg7 type 0Jul 11 01:23:46 ripley-desktop kernel: [ 41.764179] Driver 'sd' needs updating - please use bus_type methodsJul 11 01:23:46 ripley-desktop kernel: [ 41.765361] sd 6:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)Jul 11 01:23:46 ripley-desktop kernel: [ 41.766230] sd 6:0:0:0: [sda] Write Protect is offJul 11 01:23:46 ripley-desktop kernel: [ 41.766236] sd 6:0:0:0: [sda] Mode Sense: 03 00 00 00Jul 11 01:23:46 ripley-desktop kernel: [ 41.766240] sd 6:0:0:0: [sda] Assuming drive cache: write throughJul 11 01:23:46 ripley-desktop kernel: [ 41.767348] sd 6:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)Jul 11 01:23:46 ripley-desktop kernel: [ 41.768257] sd 6:0:0:0: [sda] Write Protect is offJul 11 01:23:46 ripley-desktop kernel: [ 41.768262] sd 6:0:0:0: [sda] Mode Sense: 03 00 00 00Jul 11 01:23:46 ripley-desktop kernel: [ 41.768266] sd 6:0:0:0: [sda] Assuming drive cache: write throughJul 11 01:23:46 ripley-desktop kernel: [ 41.768273] sda: sda1 sda2 < sda5 >Jul 11 01:23:46 ripley-desktop kernel: [ 41.804647] sd 6:0:0:0: [sda] Attached SCSI diskJul 11 01:23:46 ripley-desktop kernel: [ 41.813111] sd 7:0:0:0: [sdb] Attached SCSI removable diskJul 11 01:23:46 ripley-desktop kernel: [ 41.823107] sd 7:0:0:1: [sdc] Attached SCSI removable diskJul 11 01:23:46 ripley-desktop kernel: [ 41.833111] sd 7:0:0:2: [sdd] Attached SCSI removable diskJul 11 01:23:46 ripley-desktop kernel: [ 41.843127] sd 7:0:0:3: [sde] Attached SCSI removable diskJul 11 01:23:46 ripley-desktop kernel: [ 42.277127] Attempting manual resumeJul 11 01:23:46 ripley-desktop kernel: [ 42.277132] swsusp: Resume From Partition 8:5Jul 11 01:23:46 ripley-desktop kernel: [ 42.277133] PM: Checking swsusp image.Jul 11 01:23:46 ripley-desktop kernel: [ 42.277775] PM: Resume from disk failed.Jul 11 01:23:46 ripley-desktop kernel: [ 42.011976] kjournald starting. Commit interval 5 secondsJul 11 01:23:46 ripley-desktop kernel: [ 42.349474] EXT3-fs: mounted filesystem with ordered data mode.Jul 11 01:23:46 ripley-desktop kernel: [ 54.909137] input: PC Speaker as /devices/platform/pcspkr/input/input2Jul 11 01:23:46 ripley-desktop kernel: [ 54.997653] Linux agpgart interface v0.102Jul 11 01:23:46 ripley-desktop kernel: [ 54.743278] pci_hotplug: PCI Hot Plug PCI Core version: 0.5Jul 11 01:23:46 ripley-desktop kernel: [ 54.864427] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4Jul 11 01:23:46 ripley-desktop kernel: [ 55.051358] piix4_smbus 0000:00:14.0: Found 0000:00:14.0 deviceJul 11 01:23:46 ripley-desktop kernel: [ 55.496699] input: Power Button (FF) as /devices/virtual/input/input3Jul 11 01:23:46 ripley-desktop kernel: [ 55.515040] ACPI: Power Button (FF) [PWRF]Jul 11 01:23:46 ripley-desktop kernel: [ 55.515247] input: Power Button (CM) as /devices/virtual/input/input4Jul 11 01:23:46 ripley-desktop kernel: [ 55.543046] ACPI: Power Button (CM) [PWRB]Jul 11 01:23:46 ripley-desktop kernel: [ 56.565725] parport_pc 00:05: reported by Plug and Play ACPIJul 11 01:23:46 ripley-desktop kernel: [ 56.565854] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]Jul 11 01:23:46 ripley-desktop kernel: [ 57.172652] nvidia: module license 'NVIDIA' taints kernel.Jul 11 01:23:46 ripley-desktop kernel: [ 57.199956] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input5Jul 11 01:23:46 ripley-desktop kernel: [ 57.765424] Linux video capture interface: v2.00Jul 11 01:23:46 ripley-desktop kernel: [ 57.947456] em28xx v4l2 driver version 0.0.1 loadedJul 11 01:23:46 ripley-desktop kernel: [ 57.947526] em28xx new video device (2304:0208): interface 0, class 255Jul 11 01:23:46 ripley-desktop kernel: [ 57.947535] em28xx #0: Alternate settings: 8Jul 11 01:23:46 ripley-desktop kernel: [ 57.947539] em28xx #0: Alternate setting 0, max size= 0Jul 11 01:23:46 ripley-desktop kernel: [ 57.947543] em28xx #0: Alternate setting 1, max size= 1024Jul 11 01:23:46 ripley-desktop kernel: [ 57.947546] em28xx #0: Alternate setting 2, max size= 1448Jul 11 01:23:46 ripley-desktop kernel: [ 57.947548] em28xx #0: Alternate setting 3, max size= 2048Jul 11 01:23:46 ripley-desktop kernel: [ 57.947552] em28xx #0: Alternate setting 4, max size= 2304Jul 11 01:23:46 ripley-desktop kernel: [ 57.947555] em28xx #0: Alternate setting 5, max size= 2580Jul 11 01:23:46 ripley-desktop kernel: [ 57.947558] em28xx #0: Alternate setting 6, max size= 2892Jul 11 01:23:46 ripley-desktop kernel: [ 57.947560] em28xx #0: Alternate setting 7, max size= 3072Jul 11 01:23:46 ripley-desktop kernel: [ 57.694392] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 18 (level, low) -> IRQ 21Jul 11 01:23:46 ripley-desktop kernel: [ 57.694408] PCI: Setting latency timer of device 0000:01:00.0 to 64Jul 11 01:23:46 ripley-desktop kernel: [ 57.694674] NVRM: loading NVIDIA UNIX x86 Kernel Module 169.12 Thu Feb 14 17:53:07 PST 2008Jul 11 01:23:46 ripley-desktop kernel: [ 58.116566] ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 18Jul 11 01:23:46 ripley-desktop kernel: [ 58.141102] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...Jul 11 01:23:46 ripley-desktop kernel: [ 58.567263] saa7115 1-0025: saa7113 found (1f7113d0e100000) @ 0x4a (em28xx #0)Jul 11 01:23:46 ripley-desktop kernel: [ 59.322731] tuner 1-0043: chip found @ 0x86 (em28xx #0)Jul 11 01:23:46 ripley-desktop kernel: [ 59.322780] tda9887 1-0043: tda988[5/6/7] found @ 0x43 (tuner)Jul 11 01:23:46 ripley-desktop kernel: [ 59.322785] tuner 1-0043: type set to tda9887Jul 11 01:23:46 ripley-desktop kernel: [ 59.322791] tda9887 1-0043: tda988[5/6/7] found @ 0x43 (tuner)Jul 11 01:23:46 ripley-desktop kernel: [ 59.322795] tuner 1-0043: type set to tda9887Jul 11 01:23:46 ripley-desktop kernel: [ 59.325065] tuner 1-0063: chip found @ 0xc6 (em28xx #0)Jul 11 01:23:46 ripley-desktop kernel: [ 59.325099] tuner-simple 1-0063: type set to 37 (LG PAL (newer TAPC series))Jul 11 01:23:46 ripley-desktop kernel: [ 59.325104] tuner 1-0063: type set to LG PAL (newer TAPC Jul 11 01:23:46 ripley-desktop kernel: [ 59.325109] tuner-simple 1-0063: type set to 37 (LG PAL (newer TAPC series))Jul 11 01:23:46 ripley-desktop kernel: [ 59.325113] tuner 1-0063: type set to LG PAL (newer TAPC Jul 11 01:23:46 ripley-desktop kernel: [ 59.364697] em28xx #0: i2c eeprom 00: 1a eb 67 95 04 23 08 02 10 00 1e 03 98 2a 6a 2eJul 11 01:23:46 ripley-desktop kernel: [ 59.364716] em28xx #0: i2c eeprom 10: 00 00 06 57 6e 00 00 00 8e 00 00 00 07 00 00 00Jul 11 01:23:46 ripley-desktop kernel: [ 59.364730] em28xx #0: i2c eeprom 20: 16 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00Jul 11 01:23:46 ripley-desktop kernel: [ 59.364744] em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 10 01 00 00 00 00 00 00Jul 11 01:23:46 ripley-desktop kernel: [ 59.364759] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00Jul 11 01:23:46 ripley-desktop kernel: [ 59.364773] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00Jul 11 01:23:46 ripley-desktop kernel: [ 59.364789] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 2e 03 50 00 69 00Jul 11 01:23:46 ripley-desktop kernel: [ 59.364805] em28xx #0: i2c eeprom 70: 6e 00 6e 00 61 00 63 00 6c 00 65 00 20 00 53 00Jul 11 01:23:46 ripley-desktop kernel: [ 59.364820] em28xx #0: i2c eeprom 80: 79 00 73 00 74 00 65 00 6d 00 73 00 20 00 47 00Jul 11 01:23:46 ripley-desktop kernel: [ 59.364835] em28xx #0: i2c eeprom 90: 6d 00 62 00 48 00 00 00 2a 03 50 00 43 00 54 00Jul 11 01:23:46 ripley-desktop kernel: [ 59.364850] em28xx #0: i2c eeprom a0: 56 00 20 00 55 00 53 00 42 00 32 00 20 00 50 00Jul 11 01:23:46 ripley-desktop kernel: [ 59.364863] em28xx #0: i2c eeprom b0: 41 00 4c 00 2f 00 53 00 45 00 43 00 41 00 4d 00Jul 11 01:23:46 ripley-desktop kernel: [ 59.364876] em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00Jul 11 01:23:46 ripley-desktop kernel: [ 59.364888] em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00Jul 11 01:23:46 ripley-desktop kernel: [ 59.364903] em28xx #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00Jul 11 01:23:46 ripley-desktop kernel: [ 59.364919] em28xx #0: i2c eeprom f0: 00 00 00 00 00 00 00 00 0c 22 17 38 02 a2 71 0eJul 11 01:23:46 ripley-desktop kernel: [ 59.364935] EEPROM ID= 0x9567eb1aJul 11 01:23:46 ripley-desktop kernel: [ 59.364938] Vendor/Product ID= 2304:0208Jul 11 01:23:46 ripley-desktop kernel: [ 59.364941] AC97 audio (5 sample rates)Jul 11 01:23:46 ripley-desktop kernel: [ 59.364944] 500mA max powerJul 11 01:23:46 ripley-desktop kernel: [ 59.364947] Table at 0x06, strings=0x2a98, 0x2e6a, 0x0000Jul 11 01:23:46 ripley-desktop kernel: [ 59.722784] registered VBIJul 11 01:23:46 ripley-desktop kernel: [ 59.782689] em28xx #0: V4L2 device registered as /dev/video0 and /dev/vbi0Jul 11 01:23:46 ripley-desktop kernel: [ 59.782695] em28xx #0: Found Pinnacle PCTV USB 2Jul 11 01:23:46 ripley-desktop kernel: [ 59.782718] em28xx audio device (2304:0208): interface 1, class 1Jul 11 01:23:46 ripley-desktop kernel: [ 59.782732] em28xx audio device (2304:0208): interface 2, class 1Jul 11 01:23:46 ripley-desktop kernel: [ 59.782755] usbcore: registered new interface driver em28xxJul 11 01:23:46 ripley-desktop kernel: [ 60.257779] usbcore: registered new interface driver snd-usb-audioJul 11 01:23:46 ripley-desktop kernel: [ 60.759103] lp0: using parport0 (interrupt-driven).Jul 11 01:23:46 ripley-desktop kernel: [ 60.821509] Adding 3028212k swap on /dev/sda5. Priority:-1 extents:1 across:3028212kJul 11 01:23:46 ripley-desktop kernel: [ 61.376620] EXT3 FS on sda1, internal journalJul 11 01:23:46 ripley-desktop kernel: [ 61.553642] device-mapper: uevent: version 1.0.3Jul 11 01:23:46 ripley-desktop kernel: [ 61.553689] device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.comJul 11 01:23:46 ripley-desktop kernel: [ 62.957949] ip_tables: (C) 2000-2006 Netfilter Core TeamJul 11 01:23:46 ripley-desktop kernel: [ 64.430442] No dock devices found.Jul 11 01:23:47 ripley-desktop kernel: [ 65.839258] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)Jul 11 01:23:47 ripley-desktop kernel: [ 65.839270] apm: disabled - APM is not SMP safe.Jul 11 01:23:48 ripley-desktop kernel: [ 66.592835] ppdev: user-space parallel port driverJul 11 01:23:48 ripley-desktop kernel: [ 66.832871] audit(1215732228.192:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5873 profile="/usr/sbin/cupsd" namespace="default"Jul 11 01:24:21 ripley-desktop kernel: [ 99.880325] NET: Registered protocol family 10Jul 11 01:24:21 ripley-desktop kernel: [ 99.880754] lo: Disabled Privacy ExtensionsJul 11 01:24:22 ripley-desktop kernel: [ 101.477694] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1Jul 11 01:24:22 ripley-desktop kernel: [ 101.566196] Bluetooth: Core ver 2.11Jul 11 01:24:22 ripley-desktop kernel: [ 101.566650] NET: Registered protocol family 31Jul 11 01:24:22 ripley-desktop kernel: [ 101.566658] Bluetooth: HCI device and connection manager initializedJul 11 01:24:22 ripley-desktop kernel: [ 101.566666] Bluetooth: HCI socket layer initializedJul 11 01:24:22 ripley-desktop kernel: [ 101.583259] Bluetooth: L2CAP ver 2.9Jul 11 01:24:22 ripley-desktop kernel: [ 101.583267] Bluetooth: L2CAP socket layer initializedJul 11 01:24:23 ripley-desktop kernel: [ 101.654818] Bluetooth: RFCOMM socket layer initializedJul 11 01:24:23 ripley-desktop kernel: [ 101.654843] Bluetooth: RFCOMM TTY layer initializedJul 11 01:24:23 ripley-desktop kernel: [ 101.654846] Bluetooth: RFCOMM ver 1.8Jul 11 01:24:23 ripley-desktop kernel: [ 102.555211] RPC: Registered udp transport module.Jul 11 01:24:23 ripley-desktop kernel: [ 102.555223] RPC: Registered tcp transport module.Jul 11 01:24:26 ripley-desktop kernel: [ 104.938236] NET: Registered protocol family 17Jul 10 23:24:44 ripley-desktop kernel: [ 117.827090] hda-intel: Invalid position buffer, using LPIB read method instead.Jul 10 23:24:48 ripley-desktop kernel: [ 122.045653] eth0: no IPv6 routers presentJul 11 00:15:59 ripley-desktop kernel: [ 3193.152087] nautilus[6667]: segfault at 17000020 eip b77212d6 esp bff04d70 error 4Jul 11 00:16:07 ripley-desktop kernel: [ 3201.619203] ip6_tables: (C) 2000-2006 Netfilter Core TeamJul 11 00:17:20 ripley-desktop kernel: Inspecting /boot/System.map-2.6.24-19-genericJul 11 00:17:20 ripley-desktop kernel: Loaded 27883 symbols from /boot/System.map-2.6.24-19-generic.Jul 11 00:17:20 ripley-desktop kernel: Symbols match kernel version 2.6.24.Jul 11 00:17:20 ripley-desktop kernel: Loaded 36321 symbols from 103 modules.Jul 11 00:17:20 ripley-desktop kernel: [ 0.000000] Initializing cgroup subsys cpusetJul 11 00:17:20 ripley-desktop kernel: [ 0.000000] Initializing cgroup subsys cpuJul 11 00:17:20 ripley-desktop kernel: [ 0.000000] Linux version 2.6.24-19-generic (buildd@palmer) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Wed Jun 18 14:43:41 UTC 2008 (Ubuntu 2.6.24-19.34-generic)Jul 11 00:17:20 ripley-desktop kernel: [ 0.000000] BIOS-provided physical RAM map:Jul 11 00:17:20 ripley-desktop kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)Jul 11 00:17:20 ripley-desktop kernel: [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)Jul 11 00:17:20 ripley-desktop kernel: [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)Jul 11 00:17:20 ripley-desktop kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 000000003ffc0000 (usable)Jul 11 00:17:20 ripley-desktop kernel: [ 0.000000] BIOS-e820: 000000003ffc0000 - 000000003ffce000 (ACPI data)Jul 11 00:17:20 ripley-desktop kernel: [ 0.000000] BIOS-e820: 000000003ffce000 - 0000000040000000 (ACPI NVS)Jul 11 00:17:20 ripley-desktop kernel: [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)Jul 11 00:17:20 ripley-desktop kernel: [ 0.000000] BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)Jul 11 00:17:20 ripley-desktop kernel: [ 0.000000] 127MB HIGHMEM available.Jul 11 00:17:20 ripley-desktop kernel: [ 0.000000] 896MB LOWMEM available.Jul 11 00:17:20 ripley-desktop kernel: [ 0.000000] found SMP MP-table at 000ff780Jul 11 00:17:20 ripley-desktop kernel: [ 0.000000] Entering add_active_range(0, 0, 262080) 0 entries of 256 usedJul 11 00:17:20 ripley-desktop kernel: [ 0.000000] Zone PFN ranges:Jul 11 00:17:20 ripley-desktop kernel: [ 0.000000] DMA 0 -> 4096Jul 11 00:17:20 ripley-desktop kernel: [ 0.000000] Normal 4096 -> 229376Jul 11 00:17:20 ripley-desktop kernel: [ 0.000000] HighMem 229376 -> 262080Jul 11 00:17:20 ripley-desktop kernel: [ 0.000000] Movable zone start PFN for each nodeJul 11 00:17:20 ripley-desktop kernel: [ 0.000000] early_node_map[1] active PFN rangesJul 11 00:17:20 ripley-desktop kernel: [ 0.000000] 0: 0 -> 262080Jul 11 00:17:20 ripley-desktop kernel: [ 0.000000] On node 0 totalpages: 262080Jul 11 00:17:20 ripley-desktop kernel: [ 0.000000] DMA zone: 32 pages used for memmapJul 11 00:17:20 ripley-desktop kernel: [ 0.000000] DMA zone: 0 pages reservedJul 11 00:17:20 ripley-desktop kernel: [ 0.000000] DMA zone: 4064 pages, LIFO batch:0Jul 11 00:17:20 ripley-desktop kernel: [ 0.000000] Normal zone: 1760 pages used for memmapJul 11 00:17:20 ripley-desktop kernel: [ 0.000000] Normal zone: 223520 pages, LIFO batch:31Jul 11 00:17:20 ripley-desktop kernel: [ 0.000000] HighMem zone: 255 pages used for memmapJul 11 00:17:20 ripley-desktop kernel: [ 0.000000] HighMem zone: 32449 pages, LIFO batch:7Jul 11 00:17:20 ripley-desktop kernel: [ 0.000000] Movable zone: 0 pages used for memmapJul 11 00:17:20 ripley-desktop kernel: [ 0.000000] DMI present.Jul 11 00:17:20 ripley-desktop kernel: [ 0.000000] ACPI: RSDP signature @ 0xC00F8AB0 checksum 0Jul 11 00:17:20 ripley-desktop kernel: [ 0.000000] ACPI: RSDP 000F8AB0, 0014 (r0 HP-CPC)Jul 11 00:17:20 ripley-desktop kernel: [ 0.000000] ACPI: RSDT 3FFC0000, 0034 (r1 HP-CPC OEMRSDT 1000718 MSFT 97)Jul 11 00:17:20 ripley-desktop kernel: [ 0.000000] ACPI: FACP 3FFC0200, 0084 (r2 HP-CPC OEMFACP 1000718 MSFT 97)Jul 11 00:17:20 ripley-desktop kernel: [ 0.000000] ACPI: DSDT 3FFC0440, 4AE6 (r1 HP-CPC OEMRSDT 0 INTL 20051117)Jul 11 00:17:20 ripley-desktop kernel: [ 0.000000] ACPI: FACS 3FFCE000, 0040Jul 11 00:17:20 ripley-desktop kernel: [ 0.000000] ACPI: APIC 3FFC0390, 006C (r1 HP-CPC OEMAPIC 1000718 MSFT 97)Jul 11 00:17:20 ripley-desktop kernel: [ 0.000000] ACPI: MCFG 3FFC0400, 003C (r1 HP-CPC OEMMCFG 1000718 MSFT 97)Jul 11 00:17:20 ripley-desktop kernel: [ 0.000000] ACPI: OEMB 3FFCE040, 0060 (r1 HP-CPC AMI_OEM 1000718 MSFT 97)Jul 11 00:17:20 ripley-desktop kernel: [ 0.000000] ATI board detected. Disabling timer routing over 8254.Jul 11 00:17:20 ripley-desktop kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x808Jul 11 00:17:20 ripley-desktop kernel: [ 0.000000] ACPI: Local APIC address 0xfee00000Jul 11 00:17:20 ripley-desktop kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)Jul 11 00:17:20 ripley-desktop kernel: [ 0.000000] Processor #0 15:4 APIC version 20Jul 11 00:17:20 ripley-desktop kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)Jul 11 00:17:20 ripley-desktop kernel: [ 0.000000] Processor #1 15:4 APIC version 20Jul 11 00:17:20 ripley-desktop kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)Jul 11 00:17:20 ripley-desktop kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)Jul 11 00:17:20 ripley-desktop kernel: [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])Jul 11 00:17:20 ripley-desktop kernel: [ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23Jul 11 00:17:20 ripley-desktop kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)Jul 11 00:17:20 ripley-desktop kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)Jul 11 00:17:20 ripley-desktop kernel: [ 0.000000] ACPI: IRQ0 used by override.Jul 11 00:17:20 ripley-desktop kernel: [ 0.000000] ACPI: IRQ2 used by override.Jul 11 00:17:20 ripley-desktop kernel: [ 0.000000] ACPI: IRQ9 used by override.Jul 11 00:17:20 ripley-desktop kernel: [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICsJul 11 00:17:20 ripley-desktop kernel: [ 0.000000] Using ACPI (MADT) for SMP configuration informationJul 11 00:17:20 ripley-desktop kernel: [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bee00000)Jul 11 00:17:20 ripley-desktop kernel: [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000Jul 11 00:17:20 ripley-desktop kernel: [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e4000Jul 11 00:17:20 ripley-desktop kernel: [ 0.000000] swsusp: Registered nosave memory region: 00000000000e4000 - 0000000000100000Jul 11 00:17:20 ripley-desktop kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260033Jul 11 00:17:20 ripley-desktop kernel: [ 0.000000] Kernel command line: root=UUID=487f0538-66ad-48ff-a172-884c19dc37c4 ro quiet splashJul 11 00:17:20 ripley-desktop kernel: [ 0.000000] mapped APIC to ffffb000 (fee00000)Jul 11 00:17:20 ripley-desktop kernel: [ 0.000000] mapped IOAPIC to ffffa000 (fec00000)Jul 11 00:17:20 ripley-desktop kernel: [ 0.000000] Enabling fast FPU save and restore... done.Jul 11 00:17:20 ripley-desktop kernel: [ 0.000000] Enabling unmasked SIMD FPU exception support... done.Jul 11 00:17:20 ripley-desktop kernel: [ 0.000000] Initializing CPU#0Jul 11 00:17:20 ripley-desktop kernel: [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)Jul 11 00:17:20 ripley-desktop kernel: [ 0.000000] Detected 3066.068 MHz processor.Jul 11 00:17:20 ripley-desktop kernel: [ 25.633327] Console: colour VGA+ 80x25Jul 11 00:17:20 ripley-desktop kernel: [ 25.633331] console [tty0] enabledJul 11 00:17:20 ripley-desktop kernel: [ 25.634015] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)Jul 11 00:17:20 ripley-desktop kernel: [ 25.634532] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)Jul 11 00:17:20 ripley-desktop kernel: [ 25.660982] Memory: 1026808k/1048320k available (2177k kernel code, 20900k reserved, 1006k data, 368k init, 130816k highmem)Jul 11 00:17:20 ripley-desktop kernel: [ 25.660992] virtual kernel memory layout:Jul 11 00:17:20 ripley-desktop kernel: [ 25.660993] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB)Jul 11 00:17:20 ripley-desktop kernel: [ 25.660994] pkmap : 0xff800000 - 0xffc00000 (4096 kB)Jul 11 00:17:20 ripley-desktop kernel: [ 25.660995] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)Jul 11 00:17:20 ripley-desktop kernel: [ 25.660996] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)Jul 11 00:17:20 ripley-desktop kernel: [ 25.660997] .init : 0xc0421000 - 0xc047d000 ( 368 kB)Jul 11 00:17:20 ripley-desktop kernel: [ 25.660998] .data : 0xc0320434 - 0xc041bdc4 (1006 kB)Jul 11 00:17:20 ripley-desktop kernel: [ 25.660999] .text : 0xc0100000 - 0xc0320434 (2177 kB)Jul 11 00:17:20 ripley-desktop kernel: [ 25.661002] Checking if this processor honours the WP bit even in supervisor mode... Ok.Jul 11 00:17:20 ripley-desktop kernel: [ 25.661066] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1Jul 11 00:17:20 ripley-desktop kernel: [ 25.740861] Calibrating delay using timer specific routine.. 6139.49 BogoMIPS (lpj=12278983)Jul 11 00:17:20 ripley-desktop kernel: [ 25.740897] Security Framework initializedJul 11 00:17:20 ripley-desktop kernel: [ 25.740906] SELinux: Disabled at boot.Jul 11 00:17:20 ripley-desktop kernel: [ 25.740925] AppArmor: AppArmor initializedJul 11 00:17:20 ripley-desktop kernel: [ 25.740930] Failure registering capabilities with primary security module.Jul 11 00:17:20 ripley-desktop kernel: [ 25.740940] Mount-cache hash table entries: 512Jul 11 00:17:20 ripley-desktop kernel: [ 25.741104] Initializing cgroup subsys nsJul 11 00:17:20 ripley-desktop kernel: [ 25.741112] Initializing cgroup subsys cpuacctJul 11 00:17:20 ripley-desktop kernel: [ 25.741127] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000651d 00000000 00000001 00000000Jul 11 00:17:20 ripley-desktop kernel: [ 25.741137] monitor/mwait feature present.Jul 11 00:17:20 ripley-desktop kernel: [ 25.741139] using mwait in idle threads.Jul 11 00:17:20 ripley-desktop kernel: [ 25.741145] CPU: Trace cache: 12K uops, L1 D cache: 16KJul 11 00:17:20 ripley-desktop kernel: [ 25.741148] CPU: L2 cache: 1024KJul 11 00:17:20 ripley-desktop kernel: [ 25.741151] CPU: Physical Processor ID: 0Jul 11 00:17:20 ripley-desktop kernel: [ 25.741153] CPU: After all inits, caps: bfebfbff 20100000 00000000 0000b180 0000651d 00000000 00000001 00000000Jul 11 00:17:20 ripley-desktop kernel: [ 25.741165] Compat vDSO mapped to ffffe000.Jul 11 00:17:20 ripley-desktop kernel: [ 25.741184] Checking 'hlt' instruction... OK.Jul 11 00:17:20 ripley-desktop kernel: [ 25.757333] SMP alternatives: switching to UP codeJul 11 00:17:20 ripley-desktop kernel: [ 25.759357] Early unpacking initramfs... doneJul 11 00:17:20 ripley-desktop kernel: [ 26.061945] ACPI: Core revision 20070126Jul 11 00:17:20 ripley-desktop kernel: [ 26.062012] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.Jul 11 00:17:20 ripley-desktop kernel: [ 26.064877] CPU0: Intel(R) Pentium(R) 4 CPU 3.06GHz stepping 09Jul 11 00:17:20 ripley-desktop kernel: [ 26.064899] SMP alternatives: switching to SMP codeJul 11 00:17:20 ripley-desktop kernel: [ 26.065791] Booting processor 1/1 eip 3000Jul 11 00:17:20 ripley-desktop kernel: [ 26.412410] Initializing CPU#1Jul 11 00:17:20 ripley-desktop kernel: [ 26.492012] Calibrating delay using timer specific routine.. 6132.09 BogoMIPS (lpj=12264190)Jul 11 00:17:20 ripley-desktop kernel: [ 26.492024] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000651d 00000000 00000001 00000000Jul 11 00:17:20 ripley-desktop kernel: [ 26.492032] monitor/mwait feature present.Jul 11 00:17:20 ripley-desktop kernel: [ 26.492039] CPU: Trace cache: 12K uops, L1 D cache: 16KJul 11 00:17:20 ripley-desktop kernel: [ 26.492041] CPU: L2 cache: 1024KJul 11 00:17:20 ripley-desktop kernel: [ 26.492044] CPU: Physical Processor ID: 0Jul 11 00:17:20 ripley-desktop kernel: [ 26.492046] CPU: After all inits, caps: bfebfbff 20100000 00000000 0000b180 0000651d 00000000 00000001 00000000Jul 11 00:17:20 ripley-desktop kernel: [ 26.156039] CPU1: Intel(R) Pentium(R) 4 CPU 3.06GHz stepping 09Jul 11 00:17:20 ripley-desktop kernel: [ 26.156084] Total of 2 processors activated (12271.58 BogoMIPS).Jul 11 00:17:20 ripley-desktop kernel: [ 26.156266] ENABLING IO-APIC IRQsJul 11 00:17:20 ripley-desktop kernel: [ 26.156461] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1Jul 11 00:17:20 ripley-desktop kernel: [ 26.196085] ..MP-BIOS bug: 8254 timer not connected to IO-APICJul 11 00:17:20 ripley-desktop kernel: [ 26.196149] ...trying to set up timer (IRQ0) through the 8259A ... failed.Jul 11 00:17:20 ripley-desktop kernel: [ 26.196152] ...trying to set up timer as Virtual Wire IRQ... works.Jul 11 00:17:20 ripley-desktop kernel: [ 26.343230] checking TSC synchronization [CPU#0 -> CPU#1]:Jul 11 00:17:20 ripley-desktop kernel: [ 26.363177] Measured 1034408578 cycles TSC warp between CPUs, turning off TSC clock.Jul 11 00:17:20 ripley-desktop kernel: [ 26.363181] Marking TSC unstable due to: check_tsc_sync_source failed.Jul 11 00:17:20 ripley-desktop kernel: [ 26.363196] Brought up 2 CPUsJul 11 00:17:20 ripley-desktop kernel: [ 26.363222] CPU0 attaching sched-domain:Jul 11 00:17:20 ripley-desktop kernel: [ 26.363226] domain 0: span 03Jul 11 00:17:20 ripley-desktop kernel: [ 26.363228] groups: 01 02Jul 11 00:17:20 ripley-desktop kernel: [ 26.363233] domain 1: span 03Jul 11 00:17:20 ripley-desktop kernel: [ 26.363235] groups: 03Jul 11 00:17:20 ripley-desktop kernel: [ 26.363238] CPU1 attaching sched-domain:Jul 11 00:17:20 ripley-desktop kernel: [ 26.363239] domain 0: span 03Jul 11 00:17:20 ripley-desktop kernel: [ 26.363241] groups: 02 01Jul 11 00:17:20 ripley-desktop kernel: [ 26.363244] domain 1: span 03Jul 11 00:17:20 ripley-desktop kernel: [ 26.363246] groups: 03Jul 11 00:17:20 ripley-desktop kernel: [ 26.699923] net_namespace: 64 bytesJul 11 00:17:20 ripley-desktop kernel: [ 26.699935] Booting paravirtualized kernel on bare hardwareJul 11 00:17:20 ripley-desktop kernel: [ 26.700545] Time: 22:16:44 Date: 07/10/08Jul 11 00:17:20 ripley-desktop kernel: [ 26.700578] NET: Registered protocol family 16Jul 11 00:17:20 ripley-desktop kernel: [ 26.700844] EISA bus registeredJul 11 00:17:20 ripley-desktop kernel: [ 26.700851] ACPI: bus type pci registeredJul 11 00:17:20 ripley-desktop kernel: [ 26.701094] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=2Jul 11 00:17:20 ripley-desktop kernel: [ 26.701097] PCI: Using configuration type 1Jul 11 00:17:20 ripley-desktop kernel: [ 26.701115] Setting up standard PCI resourcesJul 11 00:17:20 ripley-desktop kernel: [ 26.716785] ACPI: EC: Look up EC in DSDTJul 11 00:17:20 ripley-desktop kernel: [ 26.722760] ACPI: Interpreter enabledJul 11 00:17:20 ripley-desktop kernel: [ 26.722764] ACPI: (supports S0 S1 S3 S4 S5)Jul 11 00:17:20 ripley-desktop kernel: [ 26.722784] ACPI: Using IOAPIC for interrupt routingJul 11 00:17:20 ripley-desktop kernel: [ 26.733064] ACPI: PCI Root Bridge [PCI0] (0000:00)Jul 11 00:17:20 ripley-desktop kernel: [ 26.734715] PCI: Transparent bridge - 0000:00:14.4Jul 11 00:17:20 ripley-desktop kernel: [ 26.734756] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]Jul 11 00:17:20 ripley-desktop kernel: [ 26.734882] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]Jul 11 00:17:20 ripley-desktop kernel: [ 26.735020] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]Jul 11 00:17:20 ripley-desktop kernel: [ 26.741143] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.Jul 11 00:17:20 ripley-desktop kernel: [ 26.741267] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.Jul 11 00:17:20 ripley-desktop kernel: [ 26.741390] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.Jul 11 00:17:20 ripley-desktop kernel: [ 26.741509] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.Jul 11 00:17:20 ripley-desktop kernel: [ 26.741638] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.Jul 11 00:17:20 ripley-desktop kernel: [ 26.741759] ACPI: PCI Interrupt Link [LNKF] (IRQs 9) *0, disabled.Jul 11 00:17:20 ripley-desktop kernel: [ 26.741876] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.Jul 11 00:17:20 ripley-desktop kernel: [ 26.741999] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.Jul 11 00:17:20 ripley-desktop kernel: [ 26.742158] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - ED, should be E9 [20070126]Jul 11 00:17:20 ripley-desktop kernel: [ 26.742165] Linux Plug and Play Support v0.97 (c) Adam BelayJul 11 00:17:20 ripley-desktop kernel: [ 26.742207] pnp: PnP ACPI initJul 11 00:17:20 ripley-desktop kernel: [ 26.742218] ACPI: bus type pnp registeredJul 11 00:17:20 ripley-desktop kernel: [ 26.748518] pnp: PnP ACPI: found 13 devicesJul 11 00:17:20 ripley-desktop kernel: [ 26.748521] ACPI: ACPI bus type pnp unregisteredJul 11 00:17:20 ripley-desktop kernel: [ 26.748527] PnPBIOS: Disabled by ACPI PNPJul 11 00:17:20 ripley-desktop kernel: [ 26.748836] PCI: Using ACPI for IRQ routingJul 11 00:17:20 ripley-desktop kernel: [ 26.748839] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a reportJul 11 00:17:20 ripley-desktop kernel: [ 26.748850] PCI: Cannot allocate resource region 3 of device 0000:00:00.0Jul 11 00:17:20 ripley-desktop kernel: [ 26.771434] NET: Registered protocol family 8Jul 11 00:17:20 ripley-desktop kernel: [ 26.771436] NET: Registered protocol family 20Jul 11 00:17:20 ripley-desktop kernel: [ 26.771520] AppArmor: AppArmor Filesystem EnabledJul 11 00:17:20 ripley-desktop kernel: [ 26.787494] system 00:06: ioport range 0x4d0-0x4d1 has been reservedJul 11 00:17:20 ripley-desktop kernel: [ 26.787498] system 00:06: ioport range 0x40b-0x40b has been reservedJul 11 00:17:20 ripley-desktop kernel: [ 26.787501] system 00:06: ioport range 0x4d6-0x4d6 has been reservedJul 11 00:17:20 ripley-desktop kernel: [ 26.787503] system 00:06: ioport range 0xc00-0xc01 has been reservedJul 11 00:17:20 ripley-desktop kernel: [ 26.787506] system 00:06: ioport range 0xc14-0xc14 has been reservedJul 11 00:17:20 ripley-desktop kernel: [ 26.787508] system 00:06: ioport range 0xc50-0xc51 has been reservedJul 11 00:17:20 ripley-desktop kernel: [ 26.787510] system 00:06: ioport range 0xc52-0xc52 has been reservedJul 11 00:17:20 ripley-desktop kernel: [ 26.787513] system 00:06: ioport range 0xc6c-0xc6c has been reservedJul 11 00:17:20 ripley-desktop kernel: [ 26.787515] system 00:06: ioport range 0xc6f-0xc6f has been reservedJul 11 00:17:20 ripley-desktop kernel: [ 26.787518] system 00:06: ioport range 0xcd4-0xcd5 has been reservedJul 11 00:17:20 ripley-desktop kernel: [ 26.787520] system 00:06: ioport range 0xcd6-0xcd7 has been reservedJul 11 00:17:20 ripley-desktop kernel: [ 26.787522] system 00:06: ioport range 0xcd8-0xcdf has been reservedJul 11 00:17:20 ripley-desktop kernel: [ 26.787525] system 00:06: ioport range 0x800-0x89f has been reservedJul 11 00:17:20 ripley-desktop kernel: [ 26.787527] system 00:06: ioport range 0x900-0x90f has been reservedJul 11 00:17:20 ripley-desktop kernel: [ 26.787530] system 00:06: ioport range 0x910-0x91f has been reservedJul 11 00:17:20 ripley-desktop kernel: [ 26.787533] system 00:06: ioport range 0x8200-0x821f has been reservedJul 11 00:17:20 ripley-desktop kernel: [ 26.787535] system 00:06: ioport range 0xfe00-0xfefe has been reservedJul 11 00:17:20 ripley-desktop kernel: [ 26.787538] system 00:06: iomem range 0xffb80000-0xffbfffff could not be reservedJul 11 00:17:20 ripley-desktop kernel: [ 26.787541] system 00:06: iomem range 0xfff80000-0xffffffff could not be reservedJul 11 00:17:20 ripley-desktop kernel: [ 26.787550] system 00:09: ioport range 0xa00-0xa0f has been reservedJul 11 00:17:20 ripley-desktop kernel: [ 26.787553] system 00:09: ioport range 0xa10-0xa1f has been reservedJul 11 00:17:20 ripley-desktop kernel: [ 26.787555] system 00:09: ioport range 0xa20-0xa2f has been reservedJul 11 00:17:20 ripley-desktop kernel: [ 26.787558] system 00:09: ioport range 0xa30-0xa3f has been reservedJul 11 00:17:20 ripley-desktop kernel: [ 26.787565] system 00:0a: iomem range 0xfec00000-0xfec00fff has been reservedJul 11 00:17:20 ripley-desktop kernel: [ 26.787568] system 00:0a: iomem range 0xfee00000-0xfee00fff could not be reservedJul 11 00:17:20 ripley-desktop kernel: [ 26.787574] system 00:0b: iomem range 0xe0000000-0xefffffff has been reservedJul 11 00:17:20 ripley-desktop kernel: [ 26.787581] system 00:0c: iomem range 0x0-0x9ffff could not be reservedJul 11 00:17:20 ripley-desktop kernel: [ 26.787583] system 00:0c: iomem range 0x0-0x0 could not be reservedJul 11 00:17:20 ripley-desktop kernel: [ 26.787586] system 00:0c: iomem range 0xe0000-0xfffff could not be reservedJul 11 00:17:20 ripley-desktop kernel: [ 26.787589] system 00:0c: iomem range 0x100000-0x3fffffff could not be reservedJul 11 00:17:20 ripley-desktop kernel: [ 26.787591] system 00:0c: iomem range 0x0-0x0 could not be reservedJul 11 00:17:20 ripley-desktop kernel: [ 26.818070] PCI: Bridge: 0000:00:02.0Jul 11 00:17:20 ripley-desktop kernel: [ 26.818073] IO window: disabled.Jul 11 00:17:20 ripley-desktop kernel: [ 26.818077] MEM window: fc000000-feafffffJul 11 00:17:20 ripley-desktop kernel: [ 26.818081] PREFETCH window: d0000000-dfffffffJul 11 00:17:20 ripley-desktop kernel: [ 26.818087] PCI: Bridge: 0000:00:14.4Jul 11 00:17:20 ripley-desktop kernel: [ 26.818090] IO window: e000-efffJul 11 00:17:20 ripley-desktop kernel: [ 26.818098] MEM window: feb00000-febfffffJul 11 00:17:20 ripley-desktop kernel: [ 26.818104] PREFETCH window: disabled.Jul 11 00:17:20 ripley-desktop kernel: [ 26.818127] PCI: Setting latency timer of device 0000:00:02.0 to 64Jul 11 00:17:20 ripley-desktop kernel: [ 26.818149] NET: Registered protocol family 2Jul 11 00:17:20 ripley-desktop kernel: [ 26.482810] Time: acpi_pm clocksource has been installed.Jul 11 00:17:20 ripley-desktop kernel: [ 26.482839] Switched to high resolution mode on CPU 0Jul 11 00:17:20 ripley-desktop kernel: [ 26.819369] Switched to high resolution mode on CPU 1Jul 11 00:17:20 ripley-desktop kernel: [ 26.852167] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)Jul 11 00:17:20 ripley-desktop kernel: [ 26.852541] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)Jul 11 00:17:20 ripley-desktop kernel: [ 26.853240] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)Jul 11 00:17:20 ripley-desktop kernel: [ 26.853903] TCP: Hash tables configured (established 131072 bind 65536)Jul 11 00:17:20 ripley-desktop kernel: [ 26.853906] TCP reno registeredJul 11 00:17:20 ripley-desktop kernel: [ 26.864272] checking if image is initramfs... it isJul 11 00:17:20 ripley-desktop kernel: [ 27.462220] Freeing initrd memory: 7727k freedJul 11 00:17:20 ripley-desktop kernel: [ 27.463293] audit: initializing netlink socket (disabled)Jul 11 00:17:20 ripley-desktop kernel: [ 27.463311] audit(1215728204.312:1): initializedJul 11 00:17:20 ripley-desktop kernel: [ 27.127165] highmem bounce pool size: 64 pagesJul 11 00:17:20 ripley-desktop kernel: [ 27.466141] VFS: Disk quotas dquot_6.5.1Jul 11 00:17:20 ripley-desktop kernel: [ 27.466252] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)Jul 11 00:17:20 ripley-desktop kernel: [ 27.466418] io scheduler noop registeredJul 11 00:17:20 ripley-desktop kernel: [ 27.466420] io scheduler anticipatory registeredJul 11 00:17:20 ripley-desktop kernel: [ 27.466422] io scheduler deadline registeredJul 11 00:17:20 ripley-desktop kernel: [ 27.466434] io scheduler cfq registered (default)Jul 11 00:17:20 ripley-desktop kernel: [ 27.466443] PCI: MSI quirk detected. MSI deactivated.Jul 11 00:17:20 ripley-desktop kernel: [ 27.549034] Boot video device is 0000:01:00.0Jul 11 00:17:20 ripley-desktop kernel: [ 27.549177] PCI: Setting latency timer of device 0000:00:02.0 to 64Jul 11 00:17:20 ripley-desktop kernel: [ 27.549221] assign_interrupt_mode Found MSI capabilityJul 11 00:17:20 ripley-desktop kernel: [ 27.549225] Allocate Port Service[0000:00:02.0:pcie00]Jul 11 00:17:20 ripley-desktop kernel: [ 27.549556] isapnp: Scanning for PnP cards...Jul 11 00:17:20 ripley-desktop kernel: [ 27.900208] isapnp: No Plug & Play device foundJul 11 00:17:20 ripley-desktop kernel: [ 27.939382] Real Time Clock Driver v1.12acJul 11 00:17:20 ripley-desktop kernel: [ 27.939528] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabledJul 11 00:17:20 ripley-desktop kernel: [ 27.604896] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksizeJul 11 00:17:20 ripley-desktop kernel: [ 27.604982] input: Macintosh mouse button emulation as /devices/virtual/input/input0Jul 11 00:17:20 ripley-desktop kernel: [ 27.605119] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12Jul 11 00:17:20 ripley-desktop kernel: [ 27.607035] serio: i8042 KBD port at 0x60,0x64 irq 1Jul 11 00:17:20 ripley-desktop kernel: [ 27.607042] serio: i8042 AUX port at 0x60,0x64 irq 12Jul 11 00:17:20 ripley-desktop kernel: [ 27.963831] mice: PS/2 mouse device common for all miceJul 11 00:17:20 ripley-desktop kernel: [ 27.963996] EISA: Probing bus 0 at eisa.0Jul 11 00:17:20 ripley-desktop kernel: [ 27.964017] Cannot allocate resource for EISA slot 3Jul 11 00:17:20 ripley-desktop kernel: [ 27.964019] Cannot allocate resource for EISA slot 4Jul 11 00:17:20 ripley-desktop kernel: [ 27.964021] Cannot allocate resource for EISA slot 5Jul 11 00:17:20 ripley-desktop kernel: [ 27.964023] Cannot allocate resource for EISA slot 6Jul 11 00:17:20 ripley-desktop kernel: [ 27.964025] Cannot allocate resource for EISA slot 7Jul 11 00:17:20 ripley-desktop kernel: [ 27.964027] Cannot allocate resource for EISA slot 8Jul 11 00:17:20 ripley-desktop kernel: [ 27.964029] EISA: Detected 0 cards.Jul 11 00:17:20 ripley-desktop kernel: [ 27.964033] cpuidle: using governor ladderJul 11 00:17:20 ripley-desktop kernel: [ 27.964035] cpuidle: using governor menuJul 11 00:17:20 ripley-desktop kernel: [ 27.964127] NET: Registered protocol family 1Jul 11 00:17:20 ripley-desktop kernel: [ 27.964159] Using IPI No-Shortcut modeJul 11 00:17:20 ripley-desktop kernel: [ 27.964193] registered taskstats version 1Jul 11 00:17:20 ripley-desktop kernel: [ 27.964313] Magic number: 0:810:299Jul 11 00:17:20 ripley-desktop kernel: [ 27.964482] BIOS EDD facility v0.16 2004-Jun-25, 0 devices foundJul 11 00:17:20 ripley-desktop kernel: [ 27.964484] EDD information not available.Jul 11 00:17:20 ripley-desktop kernel: [ 27.964829] Freeing unused kernel memory: 368k freedJul 11 00:17:20 ripley-desktop kernel: [ 27.651848] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1Jul 11 00:17:20 ripley-desktop kernel: [ 28.871090] fuse init (API version 7.9)Jul 11 00:17:20 ripley-desktop kernel: [ 29.233151] ACPI: duty_cycle spans bit 4Jul 11 00:17:20 ripley-desktop kernel: [ 29.233414] ACPI: duty_cycle spans bit 4Jul 11 00:17:20 ripley-desktop kernel: [ 29.233434] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126]Jul 11 00:17:20 ripley-desktop kernel: [ 29.233448] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126]Jul 11 00:17:20 ripley-desktop kernel: [ 29.414165] SCSI subsystem initializedJul 11 00:17:20 ripley-desktop kernel: [ 29.483137] usbcore: registered new interface driver usbfsJul 11 00:17:20 ripley-desktop kernel: [ 29.483174] usbcore: registered new interface driver hubJul 11 00:17:20 ripley-desktop kernel: [ 29.491977] libata version 3.00 loaded.Jul 11 00:17:20 ripley-desktop kernel: [ 29.496609] usbcore: registered new device driver usbJul 11 00:17:20 ripley-desktop kernel: [ 29.508045] sata_sil 0000:00:11.0: version 2.3Jul 11 00:17:20 ripley-desktop kernel: [ 29.508115] ACPI: PCI Interrupt 0000:00:11.0[A] -> GSI 23 (level, low) -> IRQ 16Jul 11 00:17:20 ripley-desktop kernel: [ 29.510685] scsi0 : sata_silJul 11 00:17:20 ripley-desktop kernel: [ 29.519042] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) DriverJul 11 00:17:20 ripley-desktop kernel: [ 29.530049] scsi1 : sata_silJul 11 00:17:20 ripley-desktop kernel: [ 29.530391] ata1: SATA max UDMA/100 mmio m512@0xfbfff000 tf 0xfbfff080 irq 16Jul 11 00:17:20 ripley-desktop kernel: [ 29.530397] ata2: SATA max UDMA/100 mmio m512@0xfbfff000 tf 0xfbfff0c0 irq 16Jul 11 00:17:20 ripley-desktop kernel: [ 29.793854] 8139too Fast Ethernet driver 0.9.28Jul 11 00:17:20 ripley-desktop kernel: [ 29.994448] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)Jul 11 00:17:20 ripley-desktop kernel: [ 30.174449] ata1.00: ATAPI: LITE-ON DVDRW LH-20A1S, 9L09, max UDMA/100Jul 11 00:17:20 ripley-desktop kernel: [ 30.361868] ata1.00: configured for UDMA/100Jul 11 00:17:20 ripley-desktop kernel: [ 30.671347] ata2: SATA link down (SStatus 0 SControl 310)Jul 11 00:17:20 ripley-desktop kernel: [ 30.336259] scsi 0:0:0:0: CD-ROM LITE-ON DVDRW LH-20A1S 9L09 PQ: 0 ANSI: 5Jul 11 00:17:20 ripley-desktop kernel: [ 30.336458] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) -> IRQ 17Jul 11 00:17:20 ripley-desktop kernel: [ 30.336604] scsi2 : sata_silJul 11 00:17:20 ripley-desktop kernel: [ 30.336681] scsi3 : sata_silJul 11 00:17:20 ripley-desktop kernel: [ 30.337010] ata3: SATA max UDMA/100 mmio m512@0xfbfff800 tf 0xfbfff880 irq 17Jul 11 00:17:20 ripley-desktop kernel: [ 30.337016] ata4: SATA max UDMA/100 mmio m512@0xfbfff800 tf 0xfbfff8c0 irq 17Jul 11 00:17:20 ripley-desktop kernel: [ 30.646002] ata3: SATA link down (SStatus 0 SControl 310)Jul 11 00:17:20 ripley-desktop kernel: [ 30.957040] ata4: SATA link down (SStatus 0 SControl 310)Jul 11 00:17:20 ripley-desktop kernel: [ 31.296076] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 18Jul 11 00:17:20 ripley-desktop kernel: [ 31.296098] ohci_hcd 0000:00:13.0: OHCI Host ControllerJul 11 00:17:20 ripley-desktop kernel: [ 31.296539] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1Jul 11 00:17:20 ripley-desktop kernel: [ 31.296571] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfbffe000Jul 11 00:17:20 ripley-desktop kernel: [ 31.354397] usb usb1: configuration #1 chosen from 1 choiceJul 11 00:17:20 ripley-desktop kernel: [ 31.354439] hub 1-0:1.0: USB hub foundJul 11 00:17:20 ripley-desktop kernel: [ 31.354453] hub 1-0:1.0: 4 ports detectedJul 11 00:17:20 ripley-desktop kernel: [ 31.457077] ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 18Jul 11 00:17:20 ripley-desktop kernel: [ 31.457104] ohci_hcd 0000:00:13.1: OHCI Host ControllerJul 11 00:17:20 ripley-desktop kernel: [ 31.457144] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2Jul 11 00:17:20 ripley-desktop kernel: [ 31.457165] ohci_hcd 0000:00:13.1: irq 18, io mem 0xfbffd000Jul 11 00:17:20 ripley-desktop kernel: [ 31.516842] usb usb2: configuration #1 chosen from 1 choiceJul 11 00:17:20 ripley-desktop kernel: [ 31.516882] hub 2-0:1.0: USB hub foundJul 11 00:17:20 ripley-desktop kernel: [ 31.516896] hub 2-0:1.0: 4 ports detectedJul 11 00:17:20 ripley-desktop kernel: [ 31.617076] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 19Jul 11 00:17:20 ripley-desktop kernel: [ 31.617140] PCI: Setting latency timer of device 0000:00:14.1 to 64Jul 11 00:17:20 ripley-desktop kernel: [ 31.617250] scsi4 : pata_atiixpJul 11 00:17:20 ripley-desktop kernel: [ 31.617328] scsi5 : pata_atiixpJul 11 00:17:20 ripley-desktop kernel: [ 31.619132] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14Jul 11 00:17:20 ripley-desktop kernel: [ 31.619139] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15Jul 11 00:17:20 ripley-desktop kernel: [ 31.407641] usb 1-2: new full speed USB device using ohci_hcd and address 2Jul 11 00:17:20 ripley-desktop kernel: [ 31.620201] usb 1-2: configuration #1 chosen from 1 choiceJul 11 00:17:20 ripley-desktop kernel: [ 32.259444] usb 2-1: new full speed USB device using ohci_hcd and address 2Jul 11 00:17:20 ripley-desktop kernel: [ 32.310850] ata6.00: ATAPI: TSSTcorpCD/DVDW TS-H552D, hp07, max UDMA/33Jul 11 00:17:20 ripley-desktop kernel: [ 32.310876] ata6.01: ATAPI: TSSTcorpDVD-ROM TS-H352C, HP02, max UDMA/33Jul 11 00:17:20 ripley-desktop kernel: [ 32.130645] usb 2-1: configuration #1 chosen from 1 choiceJul 11 00:17:20 ripley-desktop kernel: [ 32.185794] ata6.00: configured for UDMA/33Jul 11 00:17:20 ripley-desktop kernel: [ 32.373217] ata6.01: configured for UDMA/33Jul 11 00:17:20 ripley-desktop kernel: [ 32.374463] scsi 5:0:0:0: CD-ROM TSSTcorp CD/DVDW TS-H552D hp07 PQ: 0 ANSI: 5Jul 11 00:17:20 ripley-desktop kernel: [ 32.375186] scsi 5:0:1:0: CD-ROM TSSTcorp DVD-ROM TS-H352C HP02 PQ: 0 ANSI: 5Jul 11 00:17:20 ripley-desktop kernel: [ 32.712012] ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 18Jul 11 00:17:20 ripley-desktop kernel: [ 32.712034] ehci_hcd 0000:00:13.2: EHCI Host ControllerJul 11 00:17:20 ripley-desktop kernel: [ 32.712078] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3Jul 11 00:17:20 ripley-desktop kernel: [ 32.712150] ehci_hcd 0000:00:13.2: irq 18, io mem 0xfbffc000Jul 11 00:17:20 ripley-desktop kernel: [ 32.432488] usb 2-4: new full speed USB device using ohci_hcd and address 3Jul 11 00:17:20 ripley-desktop kernel: [ 32.780848] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004Jul 11 00:17:20 ripley-desktop kernel: [ 32.781017] usb usb3: configuration #1 chosen from 1 choiceJul 11 00:17:20 ripley-desktop kernel: [ 32.781058] hub 3-0:1.0: USB hub foundJul 11 00:17:20 ripley-desktop kernel: [ 32.781068] hub 3-0:1.0: 8 ports detectedJul 11 00:17:20 ripley-desktop kernel: [ 32.500330] usb 2-1: USB disconnect, address 2Jul 11 00:17:20 ripley-desktop kernel: [ 32.884854] ACPI: PCI Interrupt 0000:02:05.0[A] -> GSI 20 (level, low) -> IRQ 20Jul 11 00:17:20 ripley-desktop kernel: [ 32.886360] eth0: RealTek RTL8139 at 0xe800, 00:14:2a:ed:9a:05, IRQ 20Jul 11 00:17:20 ripley-desktop kernel: [ 32.886366] eth0: Identified 8139 chip type 'RTL-8100B/8139D'Jul 11 00:17:20 ripley-desktop kernel: [ 32.550263] ACPI: PCI Interrupt 0000:02:06.0[A] -> GSI 23 (level, low) -> IRQ 16Jul 11 00:17:20 ripley-desktop kernel: [ 32.602974] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[febff000-febff7ff] Max Packet=[2048] IR/IT contexts=[4/8]Jul 11 00:17:20 ripley-desktop kernel: [ 32.944399] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)Jul 11 00:17:20 ripley-desktop kernel: [ 32.969575] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2Jul 11 00:17:20 ripley-desktop kernel: [ 32.969585] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xxJul 11 00:17:20 ripley-desktop kernel: [ 32.977984] Driver 'sr' needs updating - please use bus_type methodsJul 11 00:17:20 ripley-desktop kernel: [ 32.650088] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda trayJul 11 00:17:20 ripley-desktop kernel: [ 32.650099] Uniform CD-ROM driver Revision: 3.20Jul 11 00:17:20 ripley-desktop kernel: [ 32.650186] sr 0:0:0:0: Attached scsi CD-ROM sr0Jul 11 00:17:20 ripley-desktop kernel: [ 32.661984] sr1: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda trayJul 11 00:17:20 ripley-desktop kernel: [ 32.662063] sr 5:0:0:0: Attached scsi CD-ROM sr1Jul 11 00:17:20 ripley-desktop kernel: [ 32.666269] sr2: scsi3-mmc drive: 40x/40x cd/rw xa/form2 cdda trayJul 11 00:17:20 ripley-desktop kernel: [ 32.666328] sr 5:0:1:0: Attached scsi CD-ROM sr2Jul 11 00:17:20 ripley-desktop kernel: [ 33.015280] sr 0:0:0:0: Attached scsi generic sg0 type 5Jul 11 00:17:20 ripley-desktop kernel: [ 33.015318] sr 5:0:0:0: Attached scsi generic sg1 type 5Jul 11 00:17:20 ripley-desktop kernel: [ 33.015349] sr 5:0:1:0: Attached scsi generic sg2 type 5Jul 11 00:17:20 ripley-desktop kernel: [ 33.135791] usbcore: registered new interface driver libusualJul 11 00:17:20 ripley-desktop kernel: [ 32.807847] Initializing USB Mass Storage driver...Jul 11 00:17:20 ripley-desktop kernel: [ 33.038615] usb 3-2: new high speed USB device using ehci_hcd and address 2Jul 11 00:17:20 ripley-desktop kernel: [ 33.173647] usb 3-2: configuration #1 chosen from 1 choiceJul 11 00:17:20 ripley-desktop kernel: [ 33.409471] usb 3-3: new high speed USB device using ehci_hcd and address 3Jul 11 00:17:20 ripley-desktop kernel: [ 33.549312] usb 3-3: configuration #1 chosen from 1 choiceJul 11 00:17:20 ripley-desktop kernel: [ 33.788340] usb 1-2: USB disconnect, address 2Jul 11 00:17:20 ripley-desktop kernel: [ 34.124820] scsi6 : SCSI emulation for USB Mass Storage devicesJul 11 00:17:20 ripley-desktop kernel: [ 34.124971] usbcore: registered new interface driver usb-storageJul 11 00:17:20 ripley-desktop kernel: [ 34.124978] USB Mass Storage support registered.Jul 11 00:17:20 ripley-desktop kernel: [ 34.125132] usb-storage: device found at 2Jul 11 00:17:20 ripley-desktop kernel: [ 34.125135] usb-storage: waiting for device to settle before scanningJul 11 00:17:20 ripley-desktop kernel: [ 34.217574] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00000ae6ff46de66]Jul 11 00:17:20 ripley-desktop kernel: [ 34.218971] usb 2-4: new full speed USB device using ohci_hcd and address 4Jul 11 00:17:20 ripley-desktop kernel: [ 34.427707] usb 2-4: configuration #1 chosen from 1 choiceJul 11 00:17:20 ripley-desktop kernel: [ 34.430431] scsi7 : SCSI emulation for USB Mass Storage devicesJul 11 00:17:20 ripley-desktop kernel: [ 34.767114] usb-storage: device found at 4Jul 11 00:17:20 ripley-desktop kernel: [ 34.767117] usb-storage: waiting for device to settle before scanningJul 11 00:17:20 ripley-desktop kernel: [ 38.773219] usb-storage: device scan completeJul 11 00:17:20 ripley-desktop kernel: [ 39.144882] scsi 6:0:0:0: Direct-Access ST350063 0A 3.AA PQ: 0 ANSI: 0Jul 11 00:17:20 ripley-desktop kernel: [ 39.145325] scsi 6:0:0:0: Attached scsi generic sg3 type 0Jul 11 00:17:20 ripley-desktop kernel: [ 39.152424] Driver 'sd' needs updating - please use bus_type methodsJul 11 00:17:20 ripley-desktop kernel: [ 39.153569] sd 6:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)Jul 11 00:17:20 ripley-desktop kernel: [ 39.154572] sd 6:0:0:0: [sda] Write Protect is offJul 11 00:17:20 ripley-desktop kernel: [ 39.154578] sd 6:0:0:0: [sda] Mode Sense: 03 00 00 00Jul 11 00:17:20 ripley-desktop kernel: [ 39.154583] sd 6:0:0:0: [sda] Assuming drive cache: write throughJul 11 00:17:20 ripley-desktop kernel: [ 39.155681] sd 6:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)Jul 11 00:17:20 ripley-desktop kernel: [ 39.156561] sd 6:0:0:0: [sda] Write Protect is offJul 11 00:17:20 ripley-desktop kernel: [ 39.156564] sd 6:0:0:0: [sda] Mode Sense: 03 00 00 00Jul 11 00:17:20 ripley-desktop kernel: [ 39.156566] sd 6:0:0:0: [sda] Assuming drive cache: write throughJul 11 00:17:20 ripley-desktop kernel: [ 39.156571] sda: sda1 sda2 < sda5 >Jul 11 00:17:20 ripley-desktop kernel: [ 39.194467] sd 6:0:0:0: [sda] Attached SCSI diskJul 11 00:17:20 ripley-desktop kernel: [ 39.548916] Attempting manual resumeJul 11 00:17:20 ripley-desktop kernel: [ 39.548920] swsusp: Resume From Partition 8:5Jul 11 00:17:20 ripley-desktop kernel: [ 39.548922] PM: Checking swsusp image.Jul 11 00:17:20 ripley-desktop kernel: [ 39.549547] PM: Resume from disk failed.Jul 11 00:17:20 ripley-desktop kernel: [ 39.260331] kjournald starting. Commit interval 5 secondsJul 11 00:17:20 ripley-desktop kernel: [ 39.596734] EXT3-fs: mounted filesystem with ordered data mode.Jul 11 00:17:20 ripley-desktop kernel: [ 39.416526] usb-storage: device scan completeJul 11 00:17:20 ripley-desktop kernel: [ 39.758869] scsi 7:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0Jul 11 00:17:20 ripley-desktop kernel: [ 39.764837] scsi 7:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0Jul 11 00:17:20 ripley-desktop kernel: [ 39.770827] scsi 7:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0Jul 11 00:17:20 ripley-desktop kernel: [ 39.776825] scsi 7:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0Jul 11 00:17:20 ripley-desktop kernel: [ 39.786824] sd 7:0:0:0: [sdb] Attached SCSI removable diskJul 11 00:17:20 ripley-desktop kernel: [ 39.786864] sd 7:0:0:0: Attached scsi generic sg4 type 0Jul 11 00:17:20 ripley-desktop kernel: [ 39.796777] sd 7:0:0:1: [sdc] Attached SCSI removable diskJul 11 00:17:20 ripley-desktop kernel: [ 39.796811] sd 7:0:0:1: Attached scsi generic sg5 type 0Jul 11 00:17:20 ripley-desktop kernel: [ 39.806750] sd 7:0:0:2: [sdd] Attached SCSI removable diskJul 11 00:17:20 ripley-desktop kernel: [ 39.806785] sd 7:0:0:2: Attached scsi generic sg6 type 0Jul 11 00:17:20 ripley-desktop kernel: [ 39.816725] sd 7:0:0:3: [sde] Attached SCSI removable diskJul 11 00:17:20 ripley-desktop kernel: [ 39.816762] sd 7:0:0:3: Attached scsi generic sg7 type 0Jul 11 00:17:20 ripley-desktop kernel: [ 51.646881] Linux agpgart interface v0.102Jul 11 00:17:20 ripley-desktop kernel: [ 51.781899] pci_hotplug: PCI Hot Plug PCI Core version: 0.5Jul 11 00:17:20 ripley-desktop kernel: [ 51.849762] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4Jul 11 00:17:20 ripley-desktop kernel: [ 52.064327] piix4_smbus 0000:00:14.0: Found 0000:00:14.0 deviceJul 11 00:17:20 ripley-desktop kernel: [ 52.920031] input: Power Button (FF) as /devices/virtual/input/input2Jul 11 00:17:20 ripley-desktop kernel: [ 52.951648] ACPI: Power Button (FF) [PWRF]Jul 11 00:17:20 ripley-desktop kernel: [ 52.951912] input: Power Button (CM) as /devices/virtual/input/input3Jul 11 00:17:20 ripley-desktop kernel: [ 52.979530] ACPI: Power Button (CM) [PWRB]Jul 11 00:17:20 ripley-desktop kernel: [ 53.788907] nvidia: module license 'NVIDIA' taints kernel.Jul 11 00:17:20 ripley-desktop kernel: [ 54.166565] Linux video capture interface: v2.00Jul 11 00:17:20 ripley-desktop kernel: [ 54.638630] input: PC Speaker as /devices/platform/pcspkr/input/input4Jul 11 00:17:20 ripley-desktop kernel: [ 54.721833] em28xx v4l2 driver version 0.0.1 loadedJul 11 00:17:20 ripley-desktop kernel: [ 54.721890] em28xx new video device (2304:0208): interface 0, class 255Jul 11 00:17:20 ripley-desktop kernel: [ 54.721899] em28xx #0: Alternate settings: 8Jul 11 00:17:20 ripley-desktop kernel: [ 54.721903] em28xx #0: Alternate setting 0, max size= 0Jul 11 00:17:20 ripley-desktop kernel: [ 54.721907] em28xx #0: Alternate setting 1, max size= 1024Jul 11 00:17:20 ripley-desktop kernel: [ 54.721910] em28xx #0: Alternate setting 2, max size= 1448Jul 11 00:17:20 ripley-desktop kernel: [ 54.721913] em28xx #0: Alternate setting 3, max size= 2048Jul 11 00:17:20 ripley-desktop kernel: [ 54.721917] em28xx #0: Alternate setting 4, max size= 2304Jul 11 00:17:20 ripley-desktop kernel: [ 54.721920] em28xx #0: Alternate setting 5, max size= 2580Jul 11 00:17:20 ripley-desktop kernel: [ 54.721923] em28xx #0: Alternate setting 6, max size= 2892Jul 11 00:17:20 ripley-desktop kernel: [ 54.721926] em28xx #0: Alternate setting 7, max size= 3072Jul 11 00:17:20 ripley-desktop kernel: [ 54.746134] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 18 (level, low) -> IRQ 21Jul 11 00:17:20 ripley-desktop kernel: [ 54.746152] PCI: Setting latency timer of device 0000:01:00.0 to 64Jul 11 00:17:20 ripley-desktop kernel: [ 54.746491] NVRM: loading NVIDIA UNIX x86 Kernel Module 169.12 Thu Feb 14 17:53:07 PST 2008Jul 11 00:17:20 ripley-desktop kernel: [ 55.040153] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input5Jul 11 00:17:20 ripley-desktop kernel: [ 55.441674] parport_pc 00:05: reported by Plug and Play ACPIJul 11 00:17:20 ripley-desktop kernel: [ 55.441808] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]Jul 11 00:17:20 ripley-desktop kernel: [ 55.692297] ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 19Jul 11 00:17:20 ripley-desktop kernel: [ 55.717319] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...Jul 11 00:17:20 ripley-desktop kernel: [ 55.898986] saa7115 1-0025: saa7113 found (1f7113d0e100000) @ 0x4a (em28xx #0)Jul 11 00:17:20 ripley-desktop kernel: [ 56.652207] tuner 1-0043: chip found @ 0x86 (em28xx #0)Jul 11 00:17:20 ripley-desktop kernel: [ 56.652265] tda9887 1-0043: tda988[5/6/7] found @ 0x43 (tuner)Jul 11 00:17:20 ripley-desktop kernel: [ 56.652269] tuner 1-0043: type set to tda9887Jul 11 00:17:20 ripley-desktop kernel: [ 56.652274] tda9887 1-0043: tda988[5/6/7] found @ 0x43 (tuner)Jul 11 00:17:20 ripley-desktop kernel: [ 56.652277] tuner 1-0043: type set to tda9887Jul 11 00:17:20 ripley-desktop kernel: [ 56.318168] tuner 1-0063: chip found @ 0xc6 (em28xx #0)Jul 11 00:17:20 ripley-desktop kernel: [ 56.318226] tuner-simple 1-0063: type set to 37 (LG PAL (newer TAPC series))Jul 11 00:17:20 ripley-desktop kernel: [ 56.318230] tuner 1-0063: type set to LG PAL (newer TAPC Jul 11 00:17:20 ripley-desktop kernel: [ 56.318235] tuner-simple 1-0063: type set to 37 (LG PAL (newer TAPC series))Jul 11 00:17:20 ripley-desktop kernel: [ 56.318239] tuner 1-0063: type set to LG PAL (newer TAPC Jul 11 00:17:20 ripley-desktop kernel: [ 56.361719] em28xx #0: i2c eeprom 00: 1a eb 67 95 04 23 08 02 10 00 1e 03 98 2a 6a 2eJul 11 00:17:20 ripley-desktop kernel: [ 56.361738] em28xx #0: i2c eeprom 10: 00 00 06 57 6e 00 00 00 8e 00 00 00 07 00 00 00Jul 11 00:17:20 ripley-desktop kernel: [ 56.361754] em28xx #0: i2c eeprom 20: 16 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00Jul 11 00:17:20 ripley-desktop kernel: [ 56.361772] em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 10 01 00 00 00 00 00 00Jul 11 00:17:20 ripley-desktop kernel: [ 56.361786] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00Jul 11 00:17:20 ripley-desktop kernel: [ 56.361799] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00Jul 11 00:17:20 ripley-desktop kernel: [ 56.361812] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 2e 03 50 00 69 00Jul 11 00:17:20 ripley-desktop kernel: [ 56.361830] em28xx #0: i2c eeprom 70: 6e 00 6e 00 61 00 63 00 6c 00 65 00 20 00 53 00Jul 11 00:17:20 ripley-desktop kernel: [ 56.361845] em28xx #0: i2c eeprom 80: 79 00 73 00 74 00 65 00 6d 00 73 00 20 00 47 00Jul 11 00:17:20 ripley-desktop kernel: [ 56.361860] em28xx #0: i2c eeprom 90: 6d 00 62 00 48 00 00 00 2a 03 50 00 43 00 54 00Jul 11 00:17:20 ripley-desktop kernel: [ 56.361880] em28xx #0: i2c eeprom a0: 56 00 20 00 55 00 53 00 42 00 32 00 20 00 50 00Jul 11 00:17:20 ripley-desktop kernel: [ 56.361897] em28xx #0: i2c eeprom b0: 41 00 4c 00 2f 00 53 00 45 00 43 00 41 00 4d 00Jul 11 00:17:20 ripley-desktop kernel: [ 56.361918] em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00Jul 11 00:17:20 ripley-desktop kernel: [ 56.361937] em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00Jul 11 00:17:20 ripley-desktop kernel: [ 56.361955] em28xx #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00Jul 11 00:17:20 ripley-desktop kernel: [ 56.361974] em28xx #0: i2c eeprom f0: 00 00 00 00 00 00 00 00 0c 22 17 38 02 a2 71 0eJul 11 00:17:20 ripley-desktop kernel: [ 56.361989] EEPROM ID= 0x9567eb1aJul 11 00:17:20 ripley-desktop kernel: [ 56.361994] Vendor/Product ID= 2304:0208Jul 11 00:17:20 ripley-desktop kernel: [ 56.361997] AC97 audio (5 sample rates)Jul 11 00:17:20 ripley-desktop kernel: [ 56.362001] 500mA max powerJul 11 00:17:20 ripley-desktop kernel: [ 56.362004] Table at 0x06, strings=0x2a98, 0x2e6a, 0x0000Jul 11 00:17:20 ripley-desktop kernel: [ 56.717660] registered VBIJul 11 00:17:20 ripley-desktop kernel: [ 57.114774] em28xx #0: V4L2 device registered as /dev/video0 and /dev/vbi0Jul 11 00:17:20 ripley-desktop kernel: [ 57.114780] em28xx #0: Found Pinnacle PCTV USB 2Jul 11 00:17:20 ripley-desktop kernel: [ 57.114802] em28xx audio device (2304:0208): interface 1, class 1Jul 11 00:17:20 ripley-desktop kernel: [ 57.114816] em28xx audio device (2304:0208): interface 2, class 1Jul 11 00:17:20 ripley-desktop kernel: [ 57.114839] usbcore: registered new interface driver em28xxJul 11 00:17:20 ripley-desktop kernel: [ 56.929865] usbcore: registered new interface driver snd-usb-audioJul 11 00:17:20 ripley-desktop kernel: [ 57.973785] lp0: using parport0 (interrupt-driven).Jul 11 00:17:20 ripley-desktop kernel: [ 57.699826] Adding 3028212k swap on /dev/sda5. Priority:-1 extents:1 across:3028212kJul 11 00:17:20 ripley-desktop kernel: [ 58.589589] EXT3 FS on sda1, internal journalJul 11 00:17:20 ripley-desktop kernel: [ 58.782596] device-mapper: uevent: version 1.0.3Jul 11 00:17:20 ripley-desktop kernel: [ 58.782644] device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.comJul 11 00:17:20 ripley-desktop kernel: [ 60.215683] ip_tables: (C) 2000-2006 Netfilter Core TeamJul 11 00:17:20 ripley-desktop kernel: [ 61.691730] No dock devices found.Jul 11 00:17:21 ripley-desktop kernel: [ 63.137611] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)Jul 11 00:17:21 ripley-desktop kernel: [ 63.137619] apm: disabled - APM is not SMP safe.Jul 11 00:17:22 ripley-desktop kernel: [ 63.864029] ppdev: user-space parallel port driverJul 11 00:17:22 ripley-desktop kernel: [ 64.128091] audit(1215728242.286:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5702 profile="/usr/sbin/cupsd" namespace="default"Jul 11 00:17:55 ripley-desktop kernel: [ 97.181245] NET: Registered protocol family 10Jul 11 00:17:55 ripley-desktop kernel: [ 97.181669] lo: Disabled Privacy ExtensionsJul 11 00:17:56 ripley-desktop kernel: [ 98.370304] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1Jul 11 00:17:57 ripley-desktop kernel: [ 98.811679] Bluetooth: Core ver 2.11Jul 11 00:17:57 ripley-desktop kernel: [ 98.812081] NET: Registered protocol family 31Jul 11 00:17:57 ripley-desktop kernel: [ 98.812087] Bluetooth: HCI device and connection manager initializedJul 11 00:17:57 ripley-desktop kernel: [ 98.812092] Bluetooth: HCI socket layer initializedJul 11 00:17:57 ripley-desktop kernel: [ 98.494634] Bluetooth: L2CAP ver 2.9Jul 11 00:17:57 ripley-desktop kernel: [ 98.494642] Bluetooth: L2CAP socket layer initializedJul 11 00:17:57 ripley-desktop kernel: [ 98.915159] Bluetooth: RFCOMM socket layer initializedJul 11 00:17:57 ripley-desktop kernel: [ 98.915180] Bluetooth: RFCOMM TTY layer initializedJul 11 00:17:57 ripley-desktop kernel: [ 98.915183] Bluetooth: RFCOMM ver 1.8Jul 11 00:17:58 ripley-desktop kernel: [ 99.894817] RPC: Registered udp transport module.Jul 11 00:17:58 ripley-desktop kernel: [ 99.894825] RPC: Registered tcp transport module.Jul 11 00:18:00 ripley-desktop kernel: [ 102.170348] NET: Registered protocol family 17Jul 11 00:18:13 ripley-desktop kernel: [ 115.181917] hda-intel: Invalid position buffer, using LPIB read method instead.Jul 11 00:18:16 ripley-desktop kernel: [ 118.110661] eth0: no IPv6 routers presentxorgConf:# xorg.conf (X.Org X Window System server configuration file)## This file was generated by dexconf, the Debian X Configuration tool, using# values from the debconf database.## Edit this file with caution, and see the xorg.conf manual page.# (Type "man xorg.conf" at the shell prompt.)## This file is automatically updated on xserver-xorg package upgrades *only*# if it has not been modified since the last upgrade of the xserver-xorg# package.## If you have edited this file but would like it to be automatically updated# again, run the following command:# sudo dpkg-reconfigure -phigh xserver-xorgSection "InputDevice" Identifier "Generic Keyboard" Driver "kbd" Option "XkbRules" "xorg" Option "XkbModel" "pc105" Option "XkbLayout" "es"EndSectionSection "InputDevice" Identifier "Configured Mouse" Driver "mouse" Option "CorePointer"EndSectionSection "Device" Identifier "Configured Video Device" Driver "nvidia" Option "NoLogo" "True"EndSectionSection "Monitor" Identifier "Configured Monitor"EndSectionSection "Screen" Identifier "Default Screen" Monitor "Configured Monitor" Device "Configured Video Device" Defaultdepth 24EndSectionSection "ServerLayout" Identifier "Default Layout" screen "Default Screen"EndSectionSection "Module" Load "glx"EndSectionlspci:00:00.0 Host bridge: ATI Technologies Inc Radeon Xpress 200 Host Bridge (rev 01)00:02.0 PCI bridge: ATI Technologies Inc RS480 PCI-X Root Port00:11.0 IDE interface: ATI Technologies Inc IXP SB400 Serial ATA Controller (rev 80)00:12.0 IDE interface: ATI Technologies Inc IXP SB400 Serial ATA Controller (rev 80)00:13.0 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller (rev 80)00:13.1 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller (rev 80)00:13.2 USB Controller: ATI Technologies Inc IXP SB400 USB2 Host Controller (rev 80)00:14.0 SMBus: ATI Technologies Inc IXP SB400 SMBus Controller (rev 81)00:14.1 IDE interface: ATI Technologies Inc IXP SB400 IDE Controller (rev 80)00:14.2 Audio device: ATI Technologies Inc IXP SB4x0 High Definition Audio Controller (rev 01)00:14.3 ISA bridge: ATI Technologies Inc IXP SB400 PCI-ISA Bridge (rev 80)00:14.4 PCI bridge: ATI Technologies Inc IXP SB400 PCI-PCI Bridge (rev 80)01:00.0 VGA compatible controller: nVidia Corporation G72 [GeForce 7300 LE] (rev a1)02:05.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)02:06.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev 80)