rendered paste bodyLinux version 2.6.17-1-686 (Debian 2.6.17-4) (waldi@debian.org) (gcc version 4.1.2 20060708 (prerelease) (Debian 4.1.1-8)) #1 SMP Mon Jul 17 12:45:08 UTC 2006
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001ffec000 (usable)
BIOS-e820: 000000001ffec000 - 000000001ffef000 (ACPI data)
BIOS-e820: 000000001ffef000 - 000000001ffff000 (reserved)
BIOS-e820: 000000001ffff000 - 0000000020000000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
511MB LOWMEM available.
On node 0 totalpages: 131052
DMA zone: 4096 pages, LIFO batch:0
Normal zone: 126956 pages, LIFO batch:31
DMI 2.3 present.
ASUS P4B266 detected: force use of acpi=ht
ACPI: RSDP (v000 ASUS ) @ 0x000f7720
ACPI: RSDT (v001 ASUS P4B266 0x42302e31 MSFT 0x31313031) @ 0x1ffec000
ACPI: FADT (v001 ASUS P4B266 0x42302e31 MSFT 0x31313031) @ 0x1ffec100
ACPI: BOOT (v001 ASUS P4B266 0x42302e31 MSFT 0x31313031) @ 0x1ffec040
ACPI: MADT (v001 ASUS P4B266 0x42302e31 MSFT 0x31313031) @ 0x1ffec080
ACPI: DSDT (v001 ASUS P4B266 0x00001000 MSFT 0x0100000b) @ 0x00000000
ACPI: PM-Timer IO Port: 0xe408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 15:2 APIC version 20
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000)
Built 1 zonelists
Kernel command line: root=/dev/hda1 ro
Found and enabled local APIC!
mapped APIC to ffffd000 (fee00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 8192 bytes)
Detected 2018.345 MHz processor.
Using pmtmr for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 512316k/524208k available (1478k kernel code, 11284k reserved, 540k data, 164k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 4041.14 BogoMIPS (lpj=8082295)
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 3febfbff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: After vendor identify, caps: 3febfbff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Hyper-Threading is disabled
CPU: After all inits, caps: 3febfbff 00000000 00000000 00000080 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU0: Thermal monitoring enabled
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 16k freed
CPU0: Intel(R) Pentium(R) 4 CPU 2.00GHz stepping 04
Total of 1 processors activated (4041.14 BogoMIPS).
Brought up 1 CPUs
migration_cost=0
checking if image is initramfs... it is
Freeing initrd memory: 4246k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xf1090, last bus=2
Setting up standard PCI resources
ACPI: Subsystem revision 20060127
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI: disabled
PnPBIOS: Scanning system for PnP BIOS support...
PnPBIOS: Found PnP BIOS installation structure at 0xb00fbf70
PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xbfa0, dseg 0xf0000
PnPBIOS: 16 nodes reported by PnP BIOS; 16 recorded by driver
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI quirk: region e400-e47f claimed by ICH4 ACPI/GPIO/TCO
PCI quirk: region ec00-ec3f claimed by ICH4 GPIO
Boot video device is 0000:01:00.0
PCI: Transparent bridge - 0000:00:1e.0
PCI: Using IRQ router PIIX/ICH [8086/2440] at 0000:00:1f.0
pnp: 00:12: ioport range 0x290-0x297 has been reserved
pnp: 00:12: ioport range 0x3f0-0x3f1 has been reserved
pnp: 00:12: ioport range 0xe400-0xe47f has been reserved
pnp: 00:12: ioport range 0xec00-0xec3f has been reserved
PCI: Bridge: 0000:00:01.0
IO window: disabled.
MEM window: ee000000-efefffff
PREFETCH window: eff00000-f7ffffff
PCI: Bridge: 0000:00:1e.0
IO window: b000-dfff
MEM window: eb000000-edffffff
PREFETCH window: disabled.
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 16384 bind 8192)
TCP reno registered
Simple Boot Flag at 0x3a set to 0x1
audit: initializing netlink socket (disabled)
audit(1154254781.980:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
PNP: PS/2 Controller [PNP0303,PNP0f13] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 8
NET: Registered protocol family 20
Using IPI No-Shortcut mode
Freeing unused kernel memory: 164k freed
usbcore: registered new driver usbfs
usbcore: registered new driver hub
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH2: IDE controller at PCI slot 0000:00:1f.1
ICH2: chipset revision 5
ICH2: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xa800-0xa807, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xa808-0xa80f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
ieee1394: Initialized config rom entry `ip1394'
8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
USB Universal Host Controller Interface driver v3.0
hda: ST340015A, ATA DISK drive
hdb: _NEC DVD_RW ND-1300A, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: SAMSUNG SP2514N, ATA DISK drive
ide1 at 0x170-0x177,0x376 on irq 15
PCI: Found IRQ 9 for device 0000:02:0a.0
PCI: Sharing IRQ 9 with 0000:02:04.1
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[9] MMIO=[eb800000-eb8007ff] Max Packet=[2048] IR/IT contexts=[8/8]
8139cp: pci dev 0000:02:09.0 (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
8139cp: Try the "8139too" driver instead.
PCI: Found IRQ 9 for device 0000:02:04.0
PCI: Sharing IRQ 9 with 0000:02:03.0
PCI: Sharing IRQ 9 with 0000:02:09.0
ohci_hcd 0000:02:04.0: OHCI Host Controller
ohci_hcd 0000:02:04.0: new USB bus registered, assigned bus number 1
ohci_hcd 0000:02:04.0: irq 9, io mem 0xed800000
8139too Fast Ethernet driver 0.9.27
hda: max request size: 128KiB
hda: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
hda: cache flushes supported
hda:<6>usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
hda1 hda2 < hda5 >
hdc: max request size: 512KiB
hdb: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
hdc: 488397168 sectors (250059 MB) w/8192KiB Cache, CHS=30401/255/63, UDMA(100)
hdc: cache flushes supported
hdc: hdc1 hdc2 < hdc5 hdc6 >
PCI: Found IRQ 9 for device 0000:02:04.1
PCI: Sharing IRQ 9 with 0000:02:0a.0
ohci_hcd 0000:02:04.1: OHCI Host Controller
ohci_hcd 0000:02:04.1: new USB bus registered, assigned bus number 2
ohci_hcd 0000:02:04.1: irq 9, io mem 0xed000000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ieee1394: Host added: ID:BUS[0-00:1023] GUID[001106000000358a]
PCI: Found IRQ 10 for device 0000:00:1f.2
PCI: Setting latency timer of device 0000:00:1f.2 to 64
uhci_hcd 0000:00:1f.2: UHCI Host Controller
uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1f.2: irq 10, io base 0x0000a400
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
PCI: Found IRQ 9 for device 0000:00:1f.4
PCI: Sharing IRQ 9 with 0000:02:04.2
PCI: Sharing IRQ 9 with 0000:02:0b.0
PCI: Setting latency timer of device 0000:00:1f.4 to 64
uhci_hcd 0000:00:1f.4: UHCI Host Controller
uhci_hcd 0000:00:1f.4: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1f.4: irq 9, io base 0x0000a000
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
PCI: Found IRQ 9 for device 0000:02:04.2
PCI: Sharing IRQ 9 with 0000:00:1f.4
PCI: Sharing IRQ 9 with 0000:02:0b.0
ehci_hcd 0000:02:04.2: EHCI Host Controller
ehci_hcd 0000:02:04.2: new USB bus registered, assigned bus number 5
ehci_hcd 0000:02:04.2: irq 9, io mem 0xec800000
ehci_hcd 0000:02:04.2: USB 2.0 started, EHCI 0.95, driver 10 Dec 2004
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 5 ports detected
usb 3-1: new low speed USB device using uhci_hcd and address 2
PCI: Found IRQ 9 for device 0000:02:09.0
PCI: Sharing IRQ 9 with 0000:02:03.0
PCI: Sharing IRQ 9 with 0000:02:04.0
eth0: RealTek RTL8139 at 0xd400, 00:c0:26:ab:2b:03, IRQ 9
eth0: Identified 8139 chip type 'RTL-8139C'
usb 3-1: configuration #1 chosen from 1 choice
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
usb 3-2: new low speed USB device using uhci_hcd and address 3
usb 3-2: configuration #1 chosen from 1 choice
usbcore: registered new driver hiddev
input: Microsoft® Office Keyboard as /class/input/input0
input: USB HID v1.10 Keyboard [Microsoft® Office Keyboard] on usb-0000:00:1f.2-1
input: Microsoft® Office Keyboard as /class/input/input1
input: USB HID v1.10 Device [Microsoft® Office Keyboard] on usb-0000:00:1f.2-1
input: B16_b_02 USB-PS/2 Optical Mouse as /class/input/input2
input: USB HID v1.10 Mouse [B16_b_02 USB-PS/2 Optical Mouse] on usb-0000:00:1f.2-2
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
input: PC Speaker as /class/input/input3
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected an Intel i845 Chipset.
agpgart: AGP aperture is 64M @ 0xf8000000
eth1394: eth1: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0)
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
parport0: Printer, HEWLETT-PACKARD DESKJET 930C
00:02: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:03: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.12ac
ts: Compaq touchscreen protocol output
mice: PS/2 mouse device common for all mice
Linux video capture interface: v1.00
gameport: EMU10K1 is pci0000:02:0b.1/gameport0, io 0xb400, speed 946kHz
stradis 0000:02:0c.0: 0: SDM2xx found
PCI: Found IRQ 5 for device 0000:02:0c.0
videodev: "SAA7146A" has no release callback. Please fix your driver for proper sysfs support, see http://lwn.net/Articles/36850/
stradis0: config = 10 11 13 c2 26 0f ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
PCI: Found IRQ 9 for device 0000:02:03.0
PCI: Sharing IRQ 9 with 0000:02:04.0
PCI: Sharing IRQ 9 with 0000:02:09.0
cannot find the slot for index 0 (range 0-0)
EMU10K1_Audigy: probe of 0000:02:0b.0 failed with error -12
hw_random: RNG not detected
Adding 1510068k swap on /dev/hda5. Priority:-1 extents:1 across:1510068k
EXT3 FS on hda1, internal journal
SCSI subsystem initialized
ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
ieee1394: sbp2: Try serialize_io=0 for better performance
device-mapper: 4.6.0-ioctl (2006-02-17) initialised: dm-devel@redhat.com
kjournald starting. Commit interval 5 seconds
EXT3 FS on hdc1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hdc5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hdc6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
hw_random: RNG not detected
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
cdrom: This disc doesn't have any tracks I recognize!
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
nvidia: module license 'NVIDIA' taints kernel.
PCI: Found IRQ 11 for device 0000:01:00.0
NVRM: loading NVIDIA Linux x86 Kernel Module 1.0-8756 Wed Mar 29 14:26:26 PST 2006
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
CSLIP: code copyright 1989 Regents of the University of California
PPP generic driver version 2.4.2
NET: Registered protocol family 24
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
eth0: no IPv6 routers present
ip_tables: (C) 2000-2006 Netfilter Core Team
PCI: Found IRQ 9 for device 0000:02:0b.0
PCI: Sharing IRQ 9 with 0000:00:1f.4
PCI: Sharing IRQ 9 with 0000:02:04.2