Advertising
Paste Description for lsemple
/tmp/alsa-info.txt
- lsemple
- Sunday, July 6th, 2008 at 8:11:19am UTC
- ################################
- ALSA Information Script v 0.4.48
- ################################
- Script ran on: Sun Jul 6 01:11:16 PDT 2008
- Linux Distribution
- ------------------
- Ubuntu 8.04 \n \l DISTRIB_ID=Ubuntu DISTRIB_DESCRIPTION="Ubuntu 8.04"
- Kernel Information
- ------------------
- Kernel release: 2.6.24-16-generic
- Operating System: GNU/Linux
- Architecture: i686
- Processor: unknown
- SMP Enabled: Yes
- ALSA Version
- ------------
- Driver version: 1.0.16
- Library version: 1.0.16
- Utilities version: 1.0.16
- Loaded ALSA modules
- -------------------
- snd_hda_intel
- Soundcards recognised by ALSA
- -----------------------------
- 0 [VT82xx ]: HDA-Intel - HDA VIA VT82xx
- HDA VIA VT82xx at 0xfebfc000 irq 23
- PCI Soundcards installed in the system
- --------------------------------------
- 03:04.0 Ethernet controller: Atheros Communications Inc. AR5212/AR5213 Multiprotocol MAC/baseband processor (rev 01)
- 03:05.0 Multimedia video controller: Internext Compression Inc iTVC16 (CX23416) MPEG-2 Encoder (rev 01)
- 80:01.0 Audio device: VIA Technologies, Inc. VIA High Definition Audio Controller (rev 10)
- Advanced information - PCI Vendor/Device/Susbsystem ID's
- --------------------------------------------------------
- 80:01.0 0403: 1106:3288 (rev 10)
-   Subsystem: 1849:0888
- Modprobe options (Sound related)
- --------------------------------
- snd-atiixp-modem: index=-2
- snd-intel8x0m: index=-2
- snd-via82xx-modem: index=-2
- snd-usb-audio: index=-2
- snd-usb-usx2y: index=-2
- snd-usb-caiaq: index=-2
- Loaded sound module options
- --------------------------
- Module: snd_hda_intel
- enable : Y,Y,Y,Y,Y,Y,Y,Y
- enable_msi : 0
- id : <NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>
- index : -1,-1,-1,-1,-1,-1,-1,-1
- model : auto,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>
- position_fix : 0,0,0,0,0,0,0,0
- power_save : 0
- power_save_controller : Y
- probe_mask : -1,-1,-1,-1,-1,-1,-1,-1
- single_cmd : N
- HDA-Intel Codec information
- ---------------------------
- (following section hidden - click to display)
- ALSA Device nodes
- -----------------
- crw-rw---- 1 root audio 116, 0 2008-07-06 01:07 /dev/snd/controlC0
- crw-rw---- 1 root audio 116, 4 2008-07-06 01:07 /dev/snd/hwC0D0
- crw-rw---- 1 root audio 116, 24 2008-07-06 01:07 /dev/snd/pcmC0D0c
- crw-rw---- 1 root audio 116, 16 2008-07-06 01:09 /dev/snd/pcmC0D0p
- crw-rw---- 1 root audio 116, 17 2008-07-06 01:07 /dev/snd/pcmC0D1p
- crw-rw---- 1 root audio 116, 26 2008-07-06 01:07 /dev/snd/pcmC0D2c
- crw-rw---- 1 root audio 116, 1 2008-07-06 01:07 /dev/snd/seq
- crw-rw---- 1 root audio 116, 33 2008-07-06 01:07 /dev/snd/timer
- ALSA configuration files
- ------------------------
- User specific config file (~/.asoundrc)
- # ALSA library configuration file
- # Include settings that are under the control of asoundconf(1).
- # (To disable these settings, comment out this line.)
- </home/lsemple/.asoundrc.asoundconf>
- asoundconf-generated config file
- # ALSA library configuration file managed by asoundconf(1).
- #
- # MANUAL CHANGES TO THIS FILE WILL BE OVERWRITTEN!
- #
- # Manual changes to the ALSA library configuration should be implemented
- # by editing the ~/.asoundrc file, not by editing this file.
- Aplay/Arecord output
- ------------
- APLAY
- **** List of PLAYBACK Hardware Devices ****
- card 0: VT82xx [HDA VIA VT82xx], device 0: ALC883 Analog [ALC883 Analog]
- Subdevices: 0/1
- Subdevice #0: subdevice #0
- card 0: VT82xx [HDA VIA VT82xx], device 1: ALC883 Digital [ALC883 Digital]
- Subdevices: 1/1
- Subdevice #0: subdevice #0
- ARECORD
- **** List of CAPTURE Hardware Devices ****
- card 0: VT82xx [HDA VIA VT82xx], device 0: ALC883 Analog [ALC883 Analog]
- Subdevices: 1/1
- Subdevice #0: subdevice #0
- card 0: VT82xx [HDA VIA VT82xx], device 2: ALC883 Analog [ALC883 Analog]
- Subdevices: 1/1
- Subdevice #0: subdevice #0
- Amixer output
- -------------
- -------Mixer controls for card 0 [VT82xx]
- amixer: Mixer hw:0 load error: Invalid argument
- Alsactl output
- -------------
- (following section hidden - click to display)
- All Loaded Modules
- ------------------
- Module
- af_packet
- binfmt_misc
- ipv6
- rfcomm
- l2cap
- bluetooth
- nls_iso8859_1
- nls_cp437
- vfat
- fat
- ppdev
- cpufreq_ondemand
- cpufreq_conservative
- cpufreq_powersave
- cpufreq_stats
- freq_table
- cpufreq_userspace
- container
- video
- output
- sbs
- dock
- sbshc
- battery
- iptable_filter
- ip_tables
- x_tables
- aes_i586
- dm_crypt
- dm_mod
- ac
- lp
- snd_hda_intel
- wm8775
- snd_pcm_oss
- snd_mixer_oss
- cx25840
- snd_pcm
- snd_page_alloc
- snd_hwdep
- tuner
- tea5767
- tda8290
- tuner_simple
- mt20xx
- tea5761
- snd_seq_dummy
- ivtv
- snd_seq_oss
- i2c_algo_bit
- snd_seq_midi
- irtty_sir
- cx2341x
- snd_rawmidi
- wlan_scan_sta
- sir_dev
- snd_seq_midi_event
- tveeprom
- psmouse
- ath_rate_sample
- irda
- parport_pc
- parport
- snd_seq
- videodev
- v4l2_common
- v4l1_compat
- crc_ccitt
- serio_raw
- evdev
- ath_pci
- wlan
- snd_timer
- snd_seq_device
- ath_hal
- pcspkr
- snd
- soundcore
- usbhid
- hid
- nvidia
- i2c_core
- button
- shpchp
- pci_hotplug
- via_agp
- agpgart
- usb_storage
- ext3
- jbd
- mbcache
- sg
- sr_mod
- cdrom
- sd_mod
- libusual
- pata_acpi
- ata_generic
- floppy
- pata_via
- sata_via
- ehci_hcd
- libata
- uhci_hcd
- via_rhine
- mii
- scsi_mod
- usbcore
- thermal
- processor
- fan
- fbcon
- tileblit
- font
- bitblit
- softcursor
- fuse
advertising
Update the Post
Either update this post and resubmit it with changes, or make a new post.
You may also comment on this post.
Please note that information posted here will not expire by default. If you do not want it to expire, please set the expiry time above. If it is set to expire, web search engines will not be allowed to index it prior to it expiring. Items that are not marked to expire will be indexable by search engines. Be careful with your passwords. All illegal activities will be reported and any information will be handed over to the authorities, so be good.