Linux version 2.6.18-6-486 (Debian 2.6.18.dfsg.1-18etch6) (dannf@debian.org) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #1 Fri Jun 6 21:47:01 UTC 2008BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 0000000002000000 (usable) BIOS-e820: 00000000fffe0000 - 0000000100000000 (reserved)32MB LOWMEM available.On node 0 totalpages: 8192 DMA zone: 4096 pages, LIFO batch:0 Normal zone: 4096 pages, LIFO batch:0DMI not present or invalid.ACPI: Unable to locate RSDPAllocating PCI resources starting at 10000000 (gap: 02000000:fdfe0000)Detected 167.051 MHz processor.Built 1 zonelists. Total pages: 8192Kernel command line: root=/dev/hda1 ro fb800x600 vga=788 No local APIC present or hardware disabledmapped APIC to ffffd000 (01041000)Initializing CPU#0PID hash table entries: 256 (order: 8, 1024 bytes)Console: colour dummy device 80x25Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)Memory: 25248k/32768k available (1499k kernel code, 7132k reserved, 599k data, 256k init, 0k highmem)Checking if this processor honours the WP bit even in supervisor mode... Ok.Calibrating delay using timer specific routine.. 334.49 BogoMIPS (lpj=668999)Security Framework v1.0.0 initializedSELinux: Disabled at boot.Capability LSM initializedMount-cache hash table entries: 512CPU: After generic identify, caps: 008001bf 00000000 00000000 00000000 00000000 00000000 00000000CPU: After vendor identify, caps: 008001bf 00000000 00000000 00000000 00000000 00000000 00000000Intel Pentium with F0 0F bug - workaround enabled.CPU: After all inits, caps: 008001bf 00000000 00000000 00000000 00000000 00000000 00000000Compat vDSO mapped to ffffe000.CPU: Intel Pentium MMX stepping 03Checking 'hlt' instruction... OK.checking if image is initramfs... it isFreeing initrd memory: 4227k freedNET: Registered protocol family 16EISA bus registeredPCI: PCI BIOS revision 2.10 entry at 0xfd8a0, last bus=0PCI: Using configuration type 1Setting up standard PCI resourcesACPI: Interpreter disabled.Linux Plug and Play Support v0.97 (c) Adam Belaypnp: PnP ACPI: disabledPnPBIOS: Scanning system for PnP BIOS support...PnPBIOS: Found PnP BIOS installation structure at 0xc00fe700PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xe724, dseg 0xf0000PnPBIOS: 17 nodes reported by PnP BIOS; 17 recorded by driverPCI: Probing PCI hardwarePCI: Probing PCI hardware (bus 00)Boot video device is 0000:00:03.0pnp: 00:0b: ioport range 0x4d0-0x4d1 has been reservedpnp: 00:0b: ioport range 0x15e8-0x15ef has been reservedPCI: Ignore bogus resource 6 [0:0] of 0000:00:03.0NET: Registered protocol family 2IP route cache hash table entries: 256 (order: -2, 1024 bytes)TCP established hash table entries: 1024 (order: 0, 4096 bytes)TCP bind hash table entries: 512 (order: -1, 2048 bytes)TCP: Hash tables configured (established 1024 bind 512)TCP reno registeredaudit: initializing netlink socket (disabled)audit(1215190751.844:1): initializedVFS: Disk quotas dquot_6.5.1Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)Initializing Cryptographic APIio scheduler noop registeredio scheduler anticipatory registeredio scheduler deadline registeredio scheduler cfq registered (default)vesafb: framebuffer at 0x8000000, mapped to 0xc2880000, using 1024k, total 1024kvesafb: mode is 800x600x16, linelength=1600, pages=0vesafb: protected mode interface info at c000:7f40vesafb: pmi: set display start = c00c7f76, set palette = c00c7fc8vesafb: scrolling: redrawvesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0Console: switching to colour frame buffer device 100x37fb0: VESA VGA frame buffer deviceisapnp: Scanning for PnP cards...isapnp: No Plug & Play device foundSerial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabledserial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550Apnp: Device 00:0e activated.00:0e: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550ARAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksizePNP: PS/2 Controller [PNP0303,PNP0f13] at 0x60,0x64 irq 1,12serio: i8042 AUX port at 0x60,0x64 irq 12serio: i8042 KBD port at 0x60,0x64 irq 1mice: PS/2 mouse device common for all miceEISA: Probing bus 0 at eisa.0EISA: Detected 0 cards.TCP bic registeredNET: Registered protocol family 1NET: Registered protocol family 17NET: Registered protocol family 8NET: Registered protocol family 20Using IPI Shortcut modeTime: tsc clocksource has been installed.Freeing unused kernel memory: 256k freedinput: AT Translated Set 2 keyboard as /class/input/input0Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xxMPIIX: IDE controller at PCI slot 0000:00:01.0MPIIX: chipset revision 3MPIIX: bad irq (0): will probe laterProbing IDE interface ide0...hda: TOSHIBA MK2103MAV, ATA DISK drivehdb: HITACHI CDR-S100, ATAPI CD/DVD-ROM driveide0 at 0x1f0-0x1f7,0x3f6 on irq 14hda: max request size: 128KiBhda: 4128768 sectors (2113 MB) w/128KiB Cache, CHS=4096/16/63 hda: hda1 hda2hdb: ATAPI 20X CD-ROM drive, 128kB CacheUniform CD-ROM driver Revision: 3.20Attempting manual resumekjournald starting. Commit interval 5 secondsEXT3-fs: mounted filesystem with ordered data mode.PCI: No IRQ known for interrupt pin A of device 0000:00:13.0. Please try using pci=biosirq.pd6729: Cirrus PD6729 PCI to PCMCIA Bridge at 0x3e0 on irq 0pd6729: ISA irqs = 3,4,5,7,9,10,11 polling status changes.input: PC Speaker as /class/input/input1pccard: PCMCIA card inserted into slot 1IBM TrackPoint firmware: 0x06, buttons: 2/3input: TPPS/2 IBM TrackPoint as /class/input/input2Real Time Clock Driver v1.12acFloppy drive(s): fd0 is 1.44Mparport: PnPBIOS parport detected.parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE]irda_init()NET: Registered protocol family 23FDC 0 is a National Semiconductor PC87306nsc_ircc_pnp_probe() : From PnP, found firbase 0x3F8 ; irq 4 ; dma 3.nsc-ircc, chip->initnsc-ircc, Found chip at base=0x02ensc-ircc, Wrong chip version 16nsc-ircc, Found chip at base=0x02ensc-ircc, Wrong chip version 16pnp: Device 00:0f disabled.CS4232 WSS PnP manual resources are invalid, using auto configCS4232 WSS PnP configure failed for WSS (out of resources?)PnP BIOS detection failed for CS4232pnp: Device 00:10 disabled.cs4232-pnpbios: probe of 00:10 failed with error -16CS4232 soundcard not found or device busycs: IO port probe 0x100-0x3af: clean.cs: IO port probe 0x3e0-0x4ff: clean.cs: IO port probe 0x820-0x8ff: clean.cs: IO port probe 0x100-0x3af: clean.cs: IO port probe 0x3e0-0x4ff: clean.cs: IO port probe 0x820-0x8ff: clean.cs: IO port probe 0xc00-0xcf7: clean.cs: IO port probe 0xa00-0xaff: clean.cs: IO port probe 0xc00-0xcf7: clean.cs: IO port probe 0xa00-0xaff: clean.cs: memory probe 0xa0000000-0xa0ffffff: clean.pcmcia: registering new device pcmcia1.0ad1848/cs4248 codec driver Copyright (C) by Hannu Savolainen 1993-1996ad1848: No ISAPnP cards found, trying standard ones...pnp: Device 00:10 activated.cs4232.c: ISA PnP configured, but not detected?cs4232: ISA PnP card found, but not detected?pnp: Device 00:10 disabled.cs4232: Must set io, irq and dma.ts: Compaq touchscreen protocol outputeth0: NE2000 Compatible: io 0x300, irq 3, hw_addr 00:40:F4:23:B2:42Adding 208836k swap on /dev/hda2. Priority:-1 extents:1 across:208836kEXT3 FS on hda1, internal journaldevice-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.comNET: Registered protocol family 10lo: Disabled Privacy ExtensionsIPv6 over IPv4 tunneling drivereth0: no IPv6 routers present