rendered paste bodysmartctl version 5.33 [i686-pc-linux-gnu] Copyright (C) 2002-4 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Device Model: MAXTOR 4K040H2
Serial Number: 572200516888
Firmware Version: A08.1500
User Capacity: 40,037,760,000 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 5
ATA Standard is: ATA/ATAPI-5 T13 1321D revision 1
Local Time is: Sat Jul 29 18:09:05 2006 ADT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 44) seconds.
Offline data collection
capabilities: (0x1b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
No Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 26) minutes.
SMART Attributes Data Structure revision number: 11
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x0029 100 253 020 Pre-fail Offline - 0
3 Spin_Up_Time 0x0027 087 086 020 Pre-fail Always - 1677
4 Start_Stop_Count 0x0032 099 099 008 Old_age Always - 1101
5 Reallocated_Sector_Ct 0x0033 100 100 020 Pre-fail Always - 2
7 Seek_Error_Rate 0x000b 100 093 023 Pre-fail Always - 0
9 Power_On_Hours 0x0012 096 096 001 Old_age Always - 2755
10 Spin_Retry_Count 0x0026 100 100 000 Old_age Always - 0
11 Calibration_Retry_Count 0x0013 100 100 020 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 099 099 008 Old_age Always - 955
13 Read_Soft_Error_Rate 0x000b 100 100 023 Pre-fail Always - 0
194 Temperature_Celsius 0x0022 089 086 042 Old_age Always - 30
195 Hardware_ECC_Recovered 0x001a 100 018 000 Old_age Always - 18479267
196 Reallocated_Event_Count 0x0010 100 100 020 Old_age Offline - 0
197 Current_Pending_Sector 0x0032 100 100 020 Old_age Always - 1
198 Offline_Uncorrectable 0x0010 100 253 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x001a 118 118 000 Old_age Always - 82
SMART Error Log Version: 1
ATA Error Count: 77 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 77 occurred at disk power-on lifetime: 2755 hours (114 days + 19 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 d1 01 1b 10 e9 e1 Error: UNC at LBA = 0x01e9101b = 32051227
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c4 01 01 1b 10 e9 e1 e9 00:01:26.100 READ MULTIPLE
c4 01 02 1a 10 e9 e1 e9 00:01:22.057 READ MULTIPLE
c4 01 03 19 10 e9 e1 e9 00:01:18.015 READ MULTIPLE
c4 01 04 18 10 e9 e1 e9 00:01:13.974 READ MULTIPLE
e7 01 00 00 00 00 00 e9 00:01:13.964 FLUSH CACHE
Error 76 occurred at disk power-on lifetime: 2755 hours (114 days + 19 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 d1 02 1a 10 e9 e1 Error: UNC at LBA = 0x01e9101a = 32051226
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c4 01 02 1a 10 e9 e1 e9 00:01:22.057 READ MULTIPLE
c4 01 03 19 10 e9 e1 e9 00:01:18.015 READ MULTIPLE
c4 01 04 18 10 e9 e1 e9 00:01:13.974 READ MULTIPLE
e7 01 00 00 00 00 00 e9 00:01:13.964 FLUSH CACHE
c5 00 08 84 73 13 e0 13 00:01:13.963 WRITE MULTIPLE
Error 75 occurred at disk power-on lifetime: 2755 hours (114 days + 19 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 d1 03 19 10 e9 e1 Error: UNC at LBA = 0x01e91019 = 32051225
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c4 01 03 19 10 e9 e1 e9 00:01:18.015 READ MULTIPLE
c4 01 04 18 10 e9 e1 e9 00:01:13.974 READ MULTIPLE
e7 01 00 00 00 00 00 e9 00:01:13.964 FLUSH CACHE
c5 00 08 84 73 13 e0 13 00:01:13.963 WRITE MULTIPLE
e7 01 00 00 00 00 00 e9 00:01:13.944 FLUSH CACHE
Error 74 occurred at disk power-on lifetime: 2755 hours (114 days + 19 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 d1 04 18 10 e9 e1 Error: UNC at LBA = 0x01e91018 = 32051224
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c4 01 04 18 10 e9 e1 e9 00:01:13.974 READ MULTIPLE
e7 01 00 00 00 00 00 e9 00:01:13.964 FLUSH CACHE
c5 00 08 84 73 13 e0 13 00:01:13.963 WRITE MULTIPLE
e7 01 00 00 00 00 00 e9 00:01:13.944 FLUSH CACHE
c5 00 a0 e4 72 13 e0 13 00:01:13.935 WRITE MULTIPLE
Error 73 occurred at disk power-on lifetime: 2755 hours (114 days + 19 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 d1 05 1b 10 e9 e1 Error: UNC at LBA = 0x01e9101b = 32051227
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c4 01 05 1b 10 e9 e1 e9 00:01:09.864 READ MULTIPLE
c4 01 06 1a 10 e9 e1 e9 00:01:05.810 READ MULTIPLE
c4 01 07 19 10 e9 e1 e9 00:01:01.768 READ MULTIPLE
c4 01 08 18 10 e9 e1 e9 00:00:57.734 READ MULTIPLE
c4 00 08 10 10 e9 e1 00 00:00:57.733 READ MULTIPLE
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 2667 -
# 2 Short offline Completed without error 00% 2660 -
Device does not support Selective Self Tests/Logging