rendered paste bodyIBM dmesg, PCMCIA NIC (3CXFE575CT) Doesn't work.
Linux version 2.4.18-bf2.4 (root@zombie) (gcc version 2.95.4 20011002 (Debian prerelease)) #1 Son Apr 14 09:53:28 CEST 2002
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000bff0000 (usable)
BIOS-e820: 000000000bff0000 - 000000000bfffc00 (ACPI data)
BIOS-e820: 000000000bfffc00 - 000000000c000000 (ACPI NVS)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
On node 0 totalpages: 49136
zone(0): 4096 pages.
zone(1): 45040 pages.
zone(2): 0 pages.
Local APIC disabled by BIOS -- reenabling.
Could not enable APIC!
Kernel command line: auto BOOT_IMAGE=Linux ro root=303
Initializing CPU#0
Detected 398.209 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 794.62 BogoMIPS
Memory: 190124k/196544k available (1783k kernel code, 6032k reserved, 549k data, 280k init, 0k highmem)
Dentry-cache hash table entries: 32768 (order: 6, 262144 bytes)
Inode-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
Buffer-cache hash table entries: 8192 (order: 3, 32768 bytes)
Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
CPU: Before vendor init, caps: 0183f9ff 00000000 00000000, vendor = 0
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 128K
CPU: After vendor init, caps: 0183f9ff 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 0183f9ff 00000000 00000000 00000000
CPU: Common caps: 0183f9ff 00000000 00000000 00000000
CPU: Intel Celeron (Mendocino) stepping 0a
Enabling fast FPU save and restore... done.
Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xfd9e5, last bus=0
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Using IRQ router PIIX [8086/7110] at 00:07.0
Limiting direct PCI/PCI transfers.
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
IBM machine detected. Enabling interrupts during APM calls.
Starting kswapd
VFS: Diskquotas version dquot_6.4.0 initialized
Journalled Block Device driver loaded
vga16fb: initializing
vga16fb: mapped to 0xc00a0000
Console: switching to colour frame buffer device 80x30
fb0: VGA16 VGA frame buffer device
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
Real Time Clock Driver v1.10e
block: 128 slots per queue, batch=32
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller on PCI bus 00 dev 39
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x1040-0x1047, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0x1048-0x104f, BIOS settings: hdc:pio, hdd:pio
hda: IBM-DARA-212000, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: 23579136 sectors (12073 MB) w/418KiB Cache, CHS=1467/255/63
ide-floppy driver 0.97.sv
Partition check:
hda: hda1 hda2 hda3 hda4
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
Loading I2O Core - (c) Copyright 1999 Red Hat Software
I2O configuration manager v 0.04.
(C) Copyright 1999 Red Hat Software
loop: loaded (max 8 devices)
Compaq CISS Driver (v 2.4.5)
HDLC support module revision 1.02 for Linux 2.4
Cronyx Ltd, Synchronous PPP and CISCO HDLC (c) 1994
Linux port (c) 1998 Building Number Three Ltd & Jan "Yenya" Kasprzak.
ide-floppy driver 0.97.sv
Promise Fasttrak(tm) Softwareraid driver 0.03beta: No raid array found
Highpoint HPT370 Softwareraid driver for linux version 0.01
No raid array found
SCSI subsystem driver Revision: 1.00
Red Hat/Adaptec aacraid driver, Apr 14 2002
DC390: 0 adapters found
3ware Storage Controller device driver for Linux v1.02.00.016.
3w-xxxx: No cards with valid units found.
request_module[scsi_hostadapter]: Root fs not mounted
request_module[scsi_hostadapter]: Root fs not mounted
i2o_scsi.c: Version 0.0.1
chain_pool: 0 bytes @ cbfefb20
(512 byte buffers X 4 can_queue X 0 i2o controllers)
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 1024 buckets, 8Kbytes
TCP: Hash tables configured (established 16384 bind 16384)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 280k freed
Adding Swap: 506036k swap-space (priority -1)
EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,3), internal journal
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 10:29:43 Apr 14 2002
usb-uhci.c: High bandwidth mode enabled
PCI: Found IRQ 11 for device 00:07.2
usb-uhci.c: USB UHCI at I/O 0x1060, IRQ 11
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
usb.c: registered new driver keyboard
usbkbd.c: :USB HID Boot Protocol keyboard driver
mice: PS/2 mouse device common for all mice
Linux PCMCIA Card Services 3.1.33
kernel build: 2.4.18-bf2.4 unknown
options: [pci] [cardbus] [apm]
ds: no socket drivers loaded!
unloading PCMCIA Card Services
Linux PCMCIA Card Services 3.1.33
kernel build: 2.4.18-bf2.4 unknown
options: [pci] [cardbus] [apm]
ds: no socket drivers loaded!
unloading PCMCIA Card Services
Linux PCMCIA Card Services 3.1.33
kernel build: 2.4.18-bf2.4 unknown
options: [pci] [cardbus] [apm]
ds: no socket drivers loaded!
unloading PCMCIA Card Services
Linux PCMCIA Card Services 3.1.33
kernel build: 2.4.18-bf2.4 unknown
options: [pci] [cardbus] [apm]
ds: no socket drivers loaded!
unloading PCMCIA Card Services
Linux PCMCIA Card Services 3.1.33
kernel build: 2.4.18-bf2.4 unknown
options: [pci] [cardbus] [apm]
ds: no socket drivers loaded!
unloading PCMCIA Card Services
Linux PCMCIA Card Services 3.1.33
kernel build: 2.4.18-bf2.4 unknown
options: [pci] [cardbus] [apm]
Intel ISA/PCI/CardBus PCIC probe:
PCI: Found IRQ 11 for device 00:0a.0
TI 1211 rev 00 PCI-to-CardBus at slot 00:0a, mem 0x10000000
host opts [0]: [ring] [pci + serial irq] [pci irq 11] [lat 168/176] [bus 0/1]
ISA irqs (scanned) = 3,4,7,10,15 PCI status changes
cs: cb_alloc(bus 0): vendor 0x8086, device 0x7192
Toshiba 4020 CDT works. Dmesg output:
Linux version 2.4.18-bf2.4 (root@zombie) (gcc version 2.95.4 20011002 (Debian prerelease)) #1 Son Apr 14 09:53:28 CEST 2002
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000001ff0000 (usable)
BIOS-e820: 0000000001ff0000 - 0000000002000000 (ACPI data)
BIOS-e820: 00000000100a0000 - 00000000100b6e00 (reserved)
BIOS-e820: 00000000100b6e00 - 00000000100b7000 (ACPI NVS)
BIOS-e820: 00000000100b7000 - 0000000010100000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
On node 0 totalpages: 8176
zone(0): 4096 pages.
zone(1): 4080 pages.
zone(2): 0 pages.
Local APIC disabled by BIOS -- reenabling.
Could not enable APIC!
Kernel command line: BOOT_IMAGE=Linux ro root=303
Initializing CPU#0
Detected 299.946 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 598.01 BogoMIPS
Memory: 28848k/32704k available (1783k kernel code, 3468k reserved, 549k data, 280k init, 0k highmem)
Dentry-cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode-cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
CPU: Before vendor init, caps: 0183f9ff 00000000 00000000, vendor = 0
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 512K
CPU: After vendor init, caps: 0183f9ff 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 0183f9ff 00000000 00000000 00000000
CPU: Common caps: 0183f9ff 00000000 00000000 00000000
CPU: Intel Pentium II (Deschutes) stepping 02
Enabling fast FPU save and restore... done.
Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xf1557, last bus=21
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Using IRQ router PIIX [8086/7110] at 00:07.0
PCI: Found IRQ 11 for device 00:02.0
PCI: Found IRQ 11 for device 00:02.1
PCI: Cannot allocate resource region 4 of device 00:07.1
Limiting direct PCI/PCI transfers.
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
VFS: Diskquotas version dquot_6.4.0 initialized
Journalled Block Device driver loaded
vga16fb: initializing
vga16fb: mapped to 0xc00a0000
Console: switching to colour frame buffer device 80x30
fb0: VGA16 VGA frame buffer device
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
Real Time Clock Driver v1.10e
block: 64 slots per queue, batch=16
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller on PCI bus 00 dev 39
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x1000-0x1007, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x1008-0x100f, BIOS settings: hdc:DMA, hdd:pio
hda: IBM-DARA-212000, ATA DISK drive
hdc: CD-224E, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 23579136 sectors (12073 MB) w/418KiB Cache, CHS=1467/255/63
hdc: ATAPI 24X CD-ROM drive, 128kB Cache
Uniform CD-ROM driver Revision: 3.12
ide-floppy driver 0.97.sv
Partition check:
hda: hda1 hda2 hda3 hda4
Floppy drive(s): fd0 is 1.44M
FDC 0 is an 8272A
Loading I2O Core - (c) Copyright 1999 Red Hat Software
I2O configuration manager v 0.04.
(C) Copyright 1999 Red Hat Software
loop: loaded (max 8 devices)
Compaq CISS Driver (v 2.4.5)
HDLC support module revision 1.02 for Linux 2.4
Cronyx Ltd, Synchronous PPP and CISCO HDLC (c) 1994
Linux port (c) 1998 Building Number Three Ltd & Jan "Yenya" Kasprzak.
ide-floppy driver 0.97.sv
Promise Fasttrak(tm) Softwareraid driver 0.03beta: No raid array found
Highpoint HPT370 Softwareraid driver for linux version 0.01
No raid array found
SCSI subsystem driver Revision: 1.00
Red Hat/Adaptec aacraid driver, Apr 14 2002
DC390: 0 adapters found
3ware Storage Controller device driver for Linux v1.02.00.016.
3w-xxxx: No cards with valid units found.
request_module[scsi_hostadapter]: Root fs not mounted
request_module[scsi_hostadapter]: Root fs not mounted
i2o_scsi.c: Version 0.0.1
chain_pool: 0 bytes @ c1febce0
(512 byte buffers X 4 can_queue X 0 i2o controllers)
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 2048)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 280k freed
Adding Swap: 506036k swap-space (priority -1)
EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,3), internal journal
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 10:29:43 Apr 14 2002
usb-uhci.c: High bandwidth mode enabled
PCI: Found IRQ 11 for device 00:07.2
usb-uhci.c: USB UHCI at I/O 0xffe0, IRQ 11
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
usb.c: registered new driver keyboard
usbkbd.c: :USB HID Boot Protocol keyboard driver
mice: PS/2 mouse device common for all mice
Linux PCMCIA Card Services 3.1.33
kernel build: 2.4.18-bf2.4 unknown
options: [pci] [cardbus] [apm]
ds: no socket drivers loaded!
unloading PCMCIA Card Services
Linux PCMCIA Card Services 3.1.33
kernel build: 2.4.18-bf2.4 unknown
options: [pci] [cardbus] [apm]
ds: no socket drivers loaded!
unloading PCMCIA Card Services
Linux PCMCIA Card Services 3.1.33
kernel build: 2.4.18-bf2.4 unknown
options: [pci] [cardbus] [apm]
ds: no socket drivers loaded!
unloading PCMCIA Card Services
Linux PCMCIA Card Services 3.1.33
kernel build: 2.4.18-bf2.4 unknown
options: [pci] [cardbus] [apm]
ds: no socket drivers loaded!
unloading PCMCIA Card Services
Linux PCMCIA Card Services 3.1.33
kernel build: 2.4.18-bf2.4 unknown
options: [pci] [cardbus] [apm]
ds: no socket drivers loaded!
unloading PCMCIA Card Services
Linux PCMCIA Card Services 3.1.33
kernel build: 2.4.18-bf2.4 unknown
options: [pci] [cardbus] [apm]
Intel ISA/PCI/CardBus PCIC probe:
PCI: Found IRQ 11 for device 00:02.0
PCI: Found IRQ 11 for device 00:02.1
Toshiba ToPIC97 rev 05 PCI-to-CardBus at slot 00:02, mem 0x10000000
host opts [0]: [slot 0xd0] [ccr 0x11] [cdr 0x86] [rcr 0x02] [pci irq 11] [lat 168/176] [bus 20/20]
host opts [1]: [slot 0xd0] [ccr 0x21] [cdr 0x86] [rcr 0x02] [pci irq 11] [lat 168/176] [bus 21/21]
ISA irqs (default) = 3,4,5,7,10,12 PCI status changes
cs: cb_alloc(bus 20): vendor 0x10b7, device 0x5257
3c59x.c:v0.99Q 5/16/2000 Donald Becker, becker@scyld.com
http://www.scyld.com/network/vortex.html
cs: cb_config(bus 20)
cs: IO port probe 0x0100-0x04ff: excluding 0x220-0x22f 0x330-0x337 0x378-0x37f 0x388-0x38f 0x3c0-0x3df 0x4d0-0x4d7
cs: IO port probe 0x0230-0x032f: clean.
cs: IO port probe 0x0338-0x0377: clean.
cs: IO port probe 0x0380-0x0387: clean.
cs: IO port probe 0x0390-0x03bf: clean.
cs: IO port probe 0x03e0-0x04cf: clean.
cs: IO port probe 0x04d8-0x04ff: clean.
cs: IO port probe 0x0800-0x08ff: clean.
cs: IO port probe 0x0a00-0x0aff: clean.
cs: IO port probe 0x0c00-0x0cff: clean.
fn 0 bar 1: io 0x280-0x2ff
fn 0 bar 2: mem 0x60021000-0x6002107f
fn 0 bar 3: mem 0x60020000-0x6002007f
fn 0 rom: mem 0x60000000-0x6001ffff
irq 11
cs: cb_enable(bus 20)
bridge io map 0 (flags 0x21): 0x280-0x2ff
bridge mem map 0 (flags 0x1): 0x60000000-0x60021fff
vortex_attach(device 14:00.0)
eth0: 3Com 3CCFE575CT Tornado CardBus at 0x280, 00:00:86:58:71:8d, IRQ 11
product code 'NV' rev 10.0 date 04-10-97
eth0: CardBus functions mapped 60020000->c2897000.
8K byte-wide RAM 5:3 Rx:Tx split, MII interface.
MII transceiver found at address 0, status 7809.
Enabling bus-master transmits and whole-frame receives.