All pastes #1048883 Raw Edit

Someone

public text v1 · immutable
#1048883 ·published 2008-06-17 07:23 UTC
rendered paste body
Technical Specifications*

CRT
• Size and deflection 	17 inch / 41 cm ; 90° deflection angle
• Dot pitch 	0.25 mm
• Horizontal pitch 	0.21 mm
• Tube type 	Shadow mask, Real Flat, high contrast, anti-glare, anti-static, anti reflection
• Phosphor 	P22
• Recommended display area 	12.0" x 9.0" / 306 x 230 mm
• Maximum display area 	12.8" x 9.6" / 325 x 244 mm
  	
SCANNING
• Horizontal scanning 	30 - 71 KHz
• Vertical scanning 	50 - 160 Hz
  	 
VIDEO
• Video dot rate 	120 MHz
• Input impedance 	
- Video 	75 Ohm
- Sync 	4.7 kOhm
• Input signal levels 	0.7 Vpp
• Sync input signal
	Separate sync
• Sync polarities 	Positive and negative
  	 
WHITE COLOR TEMPERATURE
Chromaticity CIE coordinates:
• at 9300  degrees K 	x = 0.283 / y = 0.297
• at 6500  degrees K 	x = 0.313 / y = 0.329
• at sRGB 	x = 0.313 / y = 0.329
  	 
PRESET MODES
	 

720 x 400 @ 70 Hz
	 

640 x 480 @ 60 Hz
	 

640 x 480 @ 85 Hz
	 

800 x 600 @ 75 Hz
	 

800 x 600 @ 85 Hz
	 

1024 x 768 @ 75 Hz
	 

1024 x 768 @ 85 Hz
	 

1280 x 1024 @ 60 Hz
	 
  	 
sRGB

sRGB is a standard for ensuring correct exchange of colors between different devices (e.g. digital cameras, monitors, printers, scanners, etc.)

Using a standard unified color space, sRGB will help represent pictures taken by an sRGB compatible device correctly on your sRGB enabled Philips monitors. In that way, the colors are calibrated and you can rely on the correctness of the colors shown on your screen.

Important with the use of sRGB is that the brightness and contrast of your monitor is fixed to a predefined setting as well as the color gamut. Therefore it is important to select the sRGB setting in the monitor's OSD.

To do so, open the OSD by pressing the OK button on the front of your monitor. Use the down button to go to Color temperature and press OK again. Then move the down button to go to sRGB and press OK again.

Exit this OSD.

After this, please don't change the brightness or contrast setting of your monitor. If you change either of these, the monitor will exit the sRGB mode and go to a color temperature setting of 6500K.

* These information are subject to change without notice.