rendered paste body[ 0.000000] Linux version 2.6.22-14-generic (buildd@terranova) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Tue Feb 12 07:42:25 UTC 2008 (Ubuntu 2.6.22-14.52-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003ff90000 (usable)
[ 0.000000] BIOS-e820: 000000003ff90000 - 000000003ff9e000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003ff9e000 - 000000003ffe0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003ffe0000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
[ 0.000000] 127MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000ff780
[ 0.000000] Entering add_active_range(0, 0, 262032) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 262032
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 262032
[ 0.000000] On node 0 totalpages: 262032
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 255 pages used for memmap
[ 0.000000] HighMem zone: 32401 pages, LIFO batch:7
[ 0.000000] DMI 2.4 present.
[ 0.000000] ACPI: RSDP signature @ 0xC00FA980 checksum 0
[ 0.000000] ACPI: RSDP 000FA980, 0014 (r0 ACPIAM)
[ 0.000000] ACPI: RSDT 3FF90000, 003C (r1 KOZIRO FRONTIER 1000730 MSFT 97)
[ 0.000000] ACPI: FACP 3FF90200, 0084 (r2 MSTEST OEMFACP 1000730 MSFT 97)
[ 0.000000] ACPI: DSDT 3FF905C0, 8F8F (r1 A0545 A0545000 0 INTL 20060113)
[ 0.000000] ACPI: FACS 3FF9E000, 0040
[ 0.000000] ACPI: APIC 3FF90390, 006C (r1 MSTEST OEMAPIC 1000730 MSFT 97)
[ 0.000000] ACPI: MCFG 3FF90400, 003C (r1 MSTEST OEMMCFG 1000730 MSFT 97)
[ 0.000000] ACPI: SLIC 3FF90440, 0176 (r1 KOZIRO FRONTIER 1000730 MSFT 97)
[ 0.000000] ACPI: OEMB 3FF9E040, 007B (r1 MSTEST AMI_OEM 1000730 MSFT 97)
[ 0.000000] ACPI: HPET 3FF99550, 0038 (r1 MSTEST OEMHPET 1000730 MSFT 97)
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:15 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] Processor #1 6:15 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] ACPI: HPET id: 0x8086a202 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bee00000)
[ 0.000000] Built 1 zonelists. Total pages: 259985
[ 0.000000] Kernel command line: root=UUID=80f65194-df94-4a6a-bc52-e5eaa7dd1aba ro quiet splash
[ 0.000000] mapped APIC to ffffd000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffc000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 2006.181 MHz processor.
[ 29.544480] Console: colour VGA+ 80x25
[ 29.544700] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 29.544945] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 29.567414] Memory: 1027388k/1048128k available (2015k kernel code, 20028k reserved, 915k data, 364k init, 130624k highmem)
[ 29.567421] virtual kernel memory layout:
[ 29.567422] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB)
[ 29.567423] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 29.567424] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 29.567425] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 29.567426] .init : 0xc03e3000 - 0xc043e000 ( 364 kB)
[ 29.567427] .data : 0xc02f7e86 - 0xc03dce84 ( 915 kB)
[ 29.567428] .text : 0xc0100000 - 0xc02f7e86 (2015 kB)
[ 29.567430] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 29.567456] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
[ 29.567573] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 29.567577] hpet0: 3 64-bit timers, 14318180 Hz
[ 29.648519] Calibrating delay using timer specific routine.. 4015.11 BogoMIPS (lpj=8030224)
[ 29.648535] Security Framework v1.0.0 initialized
[ 29.648538] SELinux: Disabled at boot.
[ 29.648549] Mount-cache hash table entries: 512
[ 29.648639] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e39d 00000000 00000001
[ 29.648645] monitor/mwait feature present.
[ 29.648647] using mwait in idle threads.
[ 29.648650] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 29.648652] CPU: L2 cache: 2048K
[ 29.648654] CPU: Physical Processor ID: 0
[ 29.648655] CPU: Processor Core ID: 0
[ 29.648657] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e39d 00000000 00000001
[ 29.648664] Compat vDSO mapped to ffffe000.
[ 29.648673] Checking 'hlt' instruction... OK.
[ 29.664623] SMP alternatives: switching to UP code
[ 29.664983] Early unpacking initramfs... done
[ 29.940746] ACPI: Core revision 20070126
[ 29.940793] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 29.976069] CPU0: Intel(R) Core(TM)2 CPU 4400 @ 2.00GHz stepping 02
[ 29.976083] SMP alternatives: switching to SMP code
[ 29.976148] Booting processor 1/1 eip 3000
[ 29.986307] Initializing CPU#1
[ 30.064148] Calibrating delay using timer specific routine.. 4012.20 BogoMIPS (lpj=8024410)
[ 30.064153] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e39d 00000000 00000001
[ 30.064157] monitor/mwait feature present.
[ 30.064160] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 30.064161] CPU: L2 cache: 2048K
[ 30.064163] CPU: Physical Processor ID: 0
[ 30.064164] CPU: Processor Core ID: 1
[ 30.064165] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e39d 00000000 00000001
[ 30.064620] CPU1: Intel(R) Core(TM)2 CPU 4400 @ 2.00GHz stepping 02
[ 30.064638] Total of 2 processors activated (8027.31 BogoMIPS).
[ 30.064781] ENABLING IO-APIC IRQs
[ 30.064948] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 30.212095] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 30.232090] Brought up 2 CPUs
[ 30.278882] migration_cost=23
[ 30.278998] Booting paravirtualized kernel on bare hardware
[ 30.279051] Time: 15:53:41 Date: 05/01/108
[ 30.279067] NET: Registered protocol family 16
[ 30.279849] EISA bus registered
[ 30.279853] ACPI: bus type pci registered
[ 30.279986] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5
[ 30.279988] PCI: Using configuration type 1
[ 30.279989] Setting up standard PCI resources
[ 30.290425] ACPI: EC: Look up EC in DSDT
[ 30.295990] ACPI: Interpreter enabled
[ 30.295993] ACPI: (supports S0 S1 S3 S4 S5)
[ 30.296008] ACPI: Using IOAPIC for interrupt routing
[ 30.304428] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 30.304442] PCI: Probing PCI hardware (bus 00)
[ 30.305022] PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[ 30.305025] PCI quirk: region 0480-04bf claimed by ICH6 GPIO
[ 30.305732] PCI: Transparent bridge - 0000:00:1e.0
[ 30.305790] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 30.305932] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[ 30.306012] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 30.306129] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 30.306212] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
[ 30.306291] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
[ 30.319827] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 30.319967] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 30.320087] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[ 30.320200] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 30.320313] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 30.320426] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 30.320540] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 30.320652] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 *14 15)
[ 30.320752] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 30.320760] pnp: PnP ACPI init
[ 30.320766] ACPI: bus type pnp registered
[ 30.324480] pnp: PnP ACPI: found 16 devices
[ 30.324482] ACPI: ACPI bus type pnp unregistered
[ 30.324485] PnPBIOS: Disabled by ACPI PNP
[ 30.324534] PCI: Using ACPI for IRQ routing
[ 30.324536] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 30.334770] NET: Registered protocol family 8
[ 30.334772] NET: Registered protocol family 20
[ 30.334821] pnp: 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
[ 30.334828] pnp: 00:08: ioport range 0x290-0x297 has been reserved
[ 30.334833] pnp: 00:09: iomem range 0xffafe000-0xffb0cbff could not be reserved
[ 30.334836] pnp: 00:09: iomem range 0xffb00000-0xffbfffff could not be reserved
[ 30.334838] pnp: 00:09: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 30.334841] pnp: 00:09: iomem range 0xfed20000-0xfed8ffff has been reserved
[ 30.334848] pnp: 00:0c: iomem range 0xfec00000-0xfec00fff has been reserved
[ 30.334851] pnp: 00:0c: iomem range 0xfee00000-0xfee00fff could not be reserved
[ 30.334855] pnp: 00:0e: iomem range 0xe0000000-0xefffffff has been reserved
[ 30.334860] pnp: 00:0f: iomem range 0x0-0x9ffff could not be reserved
[ 30.334862] pnp: 00:0f: iomem range 0xc0000-0xcffff could not be reserved
[ 30.334865] pnp: 00:0f: iomem range 0xe0000-0xfffff could not be reserved
[ 30.334867] pnp: 00:0f: iomem range 0x100000-0x3fffffff could not be reserved
[ 30.335912] Time: tsc clocksource has been installed.
[ 30.335925] Switched to high resolution mode on CPU 0
[ 30.335996] Switched to high resolution mode on CPU 1
[ 30.365096] PCI: Bridge: 0000:00:01.0
[ 30.365097] IO window: disabled.
[ 30.365101] MEM window: fa800000-fe8fffff
[ 30.365104] PREFETCH window: bfe00000-dfdfffff
[ 30.365107] PCI: Bridge: 0000:00:1c.0
[ 30.365108] IO window: disabled.
[ 30.365112] MEM window: disabled.
[ 30.365115] PREFETCH window: dfe00000-dfefffff
[ 30.365119] PCI: Bridge: 0000:00:1c.3
[ 30.365122] IO window: b000-bfff
[ 30.365126] MEM window: fea00000-feafffff
[ 30.365129] PREFETCH window: disabled.
[ 30.365133] PCI: Bridge: 0000:00:1c.4
[ 30.365135] IO window: a000-afff
[ 30.365140] MEM window: fe900000-fe9fffff
[ 30.365143] PREFETCH window: disabled.
[ 30.365147] PCI: Bridge: 0000:00:1e.0
[ 30.365148] IO window: disabled.
[ 30.365152] MEM window: disabled.
[ 30.365155] PREFETCH window: disabled.
[ 30.365168] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 30.365172] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 30.365186] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 30.365191] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 30.365206] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 17
[ 30.365211] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[ 30.365225] ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 16
[ 30.365229] PCI: Setting latency timer of device 0000:00:1c.4 to 64
[ 30.365239] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 30.365248] NET: Registered protocol family 2
[ 30.415859] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 30.415918] TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
[ 30.416585] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 30.416806] TCP: Hash tables configured (established 131072 bind 65536)
[ 30.416809] TCP reno registered
[ 30.431990] checking if image is initramfs... it is
[ 30.977216] Freeing initrd memory: 7116k freed
[ 30.977711] audit: initializing netlink socket (disabled)
[ 30.977722] audit(1212335621.116:1): initialized
[ 30.977808] highmem bounce pool size: 64 pages
[ 30.979328] VFS: Disk quotas dquot_6.5.1
[ 30.979379] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 30.979453] io scheduler noop registered
[ 30.979455] io scheduler anticipatory registered
[ 30.979457] io scheduler deadline registered
[ 30.979469] io scheduler cfq registered (default)
[ 31.059383] Boot video device is 0000:01:00.0
[ 31.059484] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 31.059536] assign_interrupt_mode Found MSI capability
[ 31.059538] Allocate Port Service[0000:00:01.0:pcie00]
[ 31.059602] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 31.059638] assign_interrupt_mode Found MSI capability
[ 31.059640] Allocate Port Service[0000:00:1c.0:pcie00]
[ 31.059665] Allocate Port Service[0000:00:1c.0:pcie02]
[ 31.059732] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[ 31.059768] assign_interrupt_mode Found MSI capability
[ 31.059770] Allocate Port Service[0000:00:1c.3:pcie00]
[ 31.059794] Allocate Port Service[0000:00:1c.3:pcie02]
[ 31.059861] PCI: Setting latency timer of device 0000:00:1c.4 to 64
[ 31.059897] assign_interrupt_mode Found MSI capability
[ 31.059899] Allocate Port Service[0000:00:1c.4:pcie00]
[ 31.059925] Allocate Port Service[0000:00:1c.4:pcie02]
[ 31.060044] isapnp: Scanning for PnP cards...
[ 31.412623] isapnp: No Plug & Play device found
[ 31.429446] Real Time Clock Driver v1.12ac
[ 31.429604] hpet_resources: 0xfed00000 is busy
[ 31.429649] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 31.429742] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 31.430211] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 31.430815] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 31.430919] input: Macintosh mouse button emulation as /class/input/input0
[ 31.431021] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 31.431023] PNP: PS/2 controller doesn't have AUX irq; using default 12
[ 31.433748] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 31.433752] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 31.433847] mice: PS/2 mouse device common for all mice
[ 31.433930] EISA: Probing bus 0 at eisa.0
[ 31.433955] EISA: Detected 0 cards.
[ 31.434029] TCP cubic registered
[ 31.434041] NET: Registered protocol family 1
[ 31.434060] Using IPI No-Shortcut mode
[ 31.434195] Magic number: 12:4:891
[ 31.434237] hash matches device ptyy1
[ 31.434432] Freeing unused kernel memory: 364k freed
[ 31.452590] input: AT Translated Set 2 keyboard as /class/input/input1
[ 32.600884] AppArmor: AppArmor initialized<5>audit(1212335622.616:2): type=1505 info="AppArmor initialized" pid=1249
[ 32.605792] fuse init (API version 7.8)
[ 32.609461] Failure registering capabilities with primary security module.
[ 32.644771] ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
[ 32.644780] ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
[ 32.991170] usbcore: registered new interface driver usbfs
[ 32.991192] usbcore: registered new interface driver hub
[ 32.991215] usbcore: registered new device driver usb
[ 32.991805] USB Universal Host Controller Interface driver v3.0
[ 32.991854] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 32.991863] PCI: Setting latency timer of device 0000:00:1a.0 to 64
[ 32.991867] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 32.991992] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 32.992017] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000dc00
[ 32.992107] usb usb1: configuration #1 chosen from 1 choice
[ 32.992128] hub 1-0:1.0: USB hub found
[ 32.992132] hub 1-0:1.0: 2 ports detected
[ 33.065663] SCSI subsystem initialized
[ 33.069724] libata version 2.21 loaded.
[ 33.093622] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 17 (level, low) -> IRQ 18
[ 33.093634] PCI: Setting latency timer of device 0000:00:1a.1 to 64
[ 33.093637] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 33.093661] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
[ 33.093687] uhci_hcd 0000:00:1a.1: irq 18, io base 0x0000e000
[ 33.093767] usb usb2: configuration #1 chosen from 1 choice
[ 33.093788] hub 2-0:1.0: USB hub found
[ 33.093792] hub 2-0:1.0: 2 ports detected
[ 33.100684] Floppy drive(s): fd0 is 1.44M
[ 33.122726] FDC 0 is a post-1991 82077
[ 33.197566] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 19
[ 33.197578] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 33.197583] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 33.197614] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3
[ 33.197652] uhci_hcd 0000:00:1d.0: irq 19, io base 0x0000d480
[ 33.197730] usb usb3: configuration #1 chosen from 1 choice
[ 33.197751] hub 3-0:1.0: USB hub found
[ 33.197756] hub 3-0:1.0: 2 ports detected
[ 33.301462] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 17
[ 33.301472] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 33.301476] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 33.301503] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4
[ 33.301531] uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000d800
[ 33.301618] usb usb4: configuration #1 chosen from 1 choice
[ 33.301641] hub 4-0:1.0: USB hub found
[ 33.301647] hub 4-0:1.0: 2 ports detected
[ 33.405321] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 20
[ 33.405330] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 33.405335] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 33.405361] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5
[ 33.405388] uhci_hcd 0000:00:1d.2: irq 20, io base 0x0000d880
[ 33.405487] usb usb5: configuration #1 chosen from 1 choice
[ 33.405516] hub 5-0:1.0: USB hub found
[ 33.405521] hub 5-0:1.0: 2 ports detected
[ 33.509919] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 20
[ 33.509929] PCI: Setting latency timer of device 0000:00:1a.7 to 64
[ 33.509932] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 33.509954] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6
[ 33.509977] ehci_hcd 0000:00:1a.7: debug port 1
[ 33.509983] PCI: cache line size of 32 is not supported by device 0000:00:1a.7
[ 33.509987] ehci_hcd 0000:00:1a.7: irq 20, io mem 0xfebffc00
[ 33.541078] usb 3-2: new low speed USB device using uhci_hcd and address 2
[ 33.541092] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 33.541183] usb usb6: configuration #1 chosen from 1 choice
[ 33.541209] hub 6-0:1.0: USB hub found
[ 33.541215] hub 6-0:1.0: 4 ports detected
[ 33.645140] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 19
[ 33.645157] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 33.645161] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 33.645195] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7
[ 33.645234] ehci_hcd 0000:00:1d.7: debug port 1
[ 33.645240] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 33.645245] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfebff800
[ 33.657004] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 33.657115] usb usb7: configuration #1 chosen from 1 choice
[ 33.657149] hub 7-0:1.0: USB hub found
[ 33.657156] hub 7-0:1.0: 6 ports detected
[ 33.761058] ahci 0000:02:00.0: version 2.2
[ 33.761084] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 34.064648] usb 3-2: device not accepting address 2, error -71
[ 34.548200] usb 3-2: new low speed USB device using uhci_hcd and address 4
[ 34.726483] usb 3-2: configuration #1 chosen from 1 choice
[ 34.737407] usbcore: registered new interface driver hiddev
[ 34.760719] input: Microsoft Microsoft Basic Optical Mouse as /class/input/input2
[ 34.760822] input: USB HID v1.11 Mouse [Microsoft Microsoft Basic Optical Mouse] on usb-0000:00:1d.0-2
[ 34.760832] usbcore: registered new interface driver usbhid
[ 34.760834] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 34.768011] ahci 0000:02:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 34.768016] ahci 0000:02:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 34.768023] PCI: Setting latency timer of device 0000:02:00.0 to 64
[ 34.768162] scsi0 : ahci
[ 34.768204] scsi1 : ahci
[ 34.768253] ata1: SATA max UDMA/133 cmd 0xf8884100 ctl 0x00000000 bmdma 0x00000000 irq 16
[ 34.768257] ata2: SATA max UDMA/133 cmd 0xf8884180 ctl 0x00000000 bmdma 0x00000000 irq 16
[ 35.079735] ata1: SATA link down (SStatus 0 SControl 300)
[ 35.391457] ata2: SATA link down (SStatus 0 SControl 300)
[ 35.391512] PCI: Enabling device 0000:02:00.1 (0000 -> 0001)
[ 35.391523] ACPI: PCI Interrupt 0000:02:00.1[B] -> GSI 17 (level, low) -> IRQ 18
[ 35.391568] PCI: Setting latency timer of device 0000:02:00.1 to 64
[ 35.391616] scsi2 : pata_jmicron
[ 35.391678] scsi3 : pata_jmicron
[ 35.391761] ata3: PATA max UDMA/100 cmd 0x0001ac00 ctl 0x0001a882 bmdma 0x0001a400 irq 18
[ 35.391764] ata4: PATA max UDMA/100 cmd 0x0001a800 ctl 0x0001a482 bmdma 0x0001a408 irq 18
[ 35.719709] ata3.00: ATAPI: Optiarc DVD RW AD-5170A, 1.11, max UDMA/66
[ 35.759914] ata3.01: ATA-7: ST3320620A, 3.AAF, max UDMA/100
[ 35.759918] ata3.01: 625142448 sectors, multi 16: LBA48
[ 35.931500] ata3.00: configured for UDMA/66
[ 35.975882] ata3.01: configured for UDMA/100
[ 36.143617] scsi 2:0:0:0: CD-ROM Optiarc DVD RW AD-5170A 1.11 PQ: 0 ANSI: 5
[ 36.143766] scsi 2:0:1:0: Direct-Access ATA ST3320620A 3.AA PQ: 0 ANSI: 5
[ 36.144987] ata_piix 0000:00:1f.2: version 2.11
[ 36.144993] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 36.145013] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 17
[ 36.145040] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 36.145095] scsi4 : ata_piix
[ 36.145133] scsi5 : ata_piix
[ 36.145211] ata5: SATA max UDMA/133 cmd 0x0001ec00 ctl 0x0001e882 bmdma 0x0001e400 irq 17
[ 36.145214] ata6: SATA max UDMA/133 cmd 0x0001e800 ctl 0x0001e482 bmdma 0x0001e408 irq 17
[ 36.350504] ata5.00: ATA-7: ST380815AS, 3.AAD, max UDMA/133
[ 36.350509] ata5.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 36.425403] ata5.00: configured for UDMA/133
[ 36.628238] ata6.00: ATA-7: ST380815AS, 3.AAD, max UDMA/133
[ 36.628242] ata6.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 36.694809] ata6.00: configured for UDMA/133
[ 36.694916] scsi 4:0:0:0: Direct-Access ATA ST380815AS 3.AA PQ: 0 ANSI: 5
[ 36.695047] scsi 5:0:0:0: Direct-Access ATA ST380815AS 3.AA PQ: 0 ANSI: 5
[ 36.695089] ata_piix 0000:00:1f.5: MAP [ P0 P2 P1 P3 ]
[ 36.695106] ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 19 (level, low) -> IRQ 17
[ 36.695129] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[ 36.695346] scsi6 : ata_piix
[ 36.695378] scsi7 : ata_piix
[ 36.695454] ata7: SATA max UDMA/133 cmd 0x0001d400 ctl 0x0001d082 bmdma 0x0001c880 irq 17
[ 36.695457] ata8: SATA max UDMA/133 cmd 0x0001d000 ctl 0x0001cc02 bmdma 0x0001c888 irq 17
[ 37.024970] r8169 Gigabit Ethernet driver 2.2LK loaded
[ 37.024988] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 19 (level, low) -> IRQ 17
[ 37.025002] PCI: Setting latency timer of device 0000:03:00.0 to 64
[ 37.025185] eth0: RTL8168b/8111b at 0xf886c000, 00:1a:92:72:dd:f1, XID 38000000 IRQ 17
[ 37.034382] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[ 37.034385] Uniform CD-ROM driver Revision: 3.20
[ 37.034425] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 37.038808] sr 2:0:0:0: Attached scsi generic sg0 type 5
[ 37.038824] sd 2:0:1:0: Attached scsi generic sg1 type 0
[ 37.038840] scsi 4:0:0:0: Attached scsi generic sg2 type 0
[ 37.038854] scsi 5:0:0:0: Attached scsi generic sg3 type 0
[ 37.040494] sd 2:0:1:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
[ 37.040507] sd 2:0:1:0: [sda] Write Protect is off
[ 37.040509] sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00
[ 37.040522] sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 37.040565] sd 2:0:1:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
[ 37.040572] sd 2:0:1:0: [sda] Write Protect is off
[ 37.040574] sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00
[ 37.040586] sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 37.040590] sda:
[ 37.062293] sd 2:0:1:0: [sda] Attached SCSI disk
[ 37.062442] sd 4:0:0:0: [sdb] 156301488 512-byte hardware sectors (80026 MB)
[ 37.062451] sd 4:0:0:0: [sdb] Write Protect is off
[ 37.062453] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 37.062466] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 37.062497] sd 4:0:0:0: [sdb] 156301488 512-byte hardware sectors (80026 MB)
[ 37.062504] sd 4:0:0:0: [sdb] Write Protect is off
[ 37.062506] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 37.062518] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 37.062521] sdb: sdb1
[ 37.081170] sd 4:0:0:0: [sdb] Attached SCSI disk
[ 37.081309] sd 5:0:0:0: [sdc] 156301488 512-byte hardware sectors (80026 MB)
[ 37.081319] sd 5:0:0:0: [sdc] Write Protect is off
[ 37.081321] sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 37.081333] sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 37.081365] sd 5:0:0:0: [sdc] 156301488 512-byte hardware sectors (80026 MB)
[ 37.081372] sd 5:0:0:0: [sdc] Write Protect is off
[ 37.081374] sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 37.081385] sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 37.081388] sdc: sdc1 sdc2 < sdc5 >
[ 37.126844] sd 5:0:0:0: [sdc] Attached SCSI disk
[ 37.385170] Attempting manual resume
[ 37.385173] swsusp: Resume From Partition 8:37
[ 37.385175] PM: Checking swsusp image.
[ 37.385322] PM: Resume from disk failed.
[ 37.421902] kjournald starting. Commit interval 5 seconds
[ 37.421908] EXT3-fs: mounted filesystem with ordered data mode.
[ 43.443565] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 43.468018] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 43.577520] Linux agpgart interface v0.102 (c) Dave Jones
[ 43.760680] parport_pc 00:0b: reported by Plug and Play ACPI
[ 43.760781] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[ 43.802544] iTCO_vendor_support: vendor-support=0
[ 43.803678] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
[ 43.804017] iTCO_wdt: Found a ICH8 or ICH8R TCO device (Version=2, TCOBASE=0x0860)
[ 43.804317] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 43.900540] input: PC Speaker as /class/input/input3
[ 44.433613] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 21
[ 44.433632] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 44.977151] lp0: using parport0 (interrupt-driven).
[ 45.073592] Adding 3028212k swap on /dev/sdc5. Priority:-1 extents:1 across:3028212k
[ 45.325609] EXT3 FS on sdc1, internal journal
[ 46.300121] input: Power Button (FF) as /class/input/input4
[ 46.300138] ACPI: Power Button (FF) [PWRF]
[ 46.300235] input: Power Button (CM) as /class/input/input5
[ 46.300246] ACPI: Power Button (CM) [PWRB]
[ 46.347743] No dock devices found.
[ 47.816953] r8169: eth0: link down
[ 48.989160] Failure registering capabilities with primary security module.
[ 49.100662] ppdev: user-space parallel port driver
[ 49.274640] audit(1212324838.933:3): type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=5283 profile="/usr/sbin/cupsd"
[ 49.350495] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 49.350499] apm: disabled - APM is not SMP safe.
[ 49.741734] Bluetooth: Core ver 2.11
[ 49.741912] NET: Registered protocol family 31
[ 49.741914] Bluetooth: HCI device and connection manager initialized
[ 49.741917] Bluetooth: HCI socket layer initialized
[ 49.800915] Bluetooth: L2CAP ver 2.8
[ 49.800919] Bluetooth: L2CAP socket layer initialized
[ 49.923943] Bluetooth: RFCOMM socket layer initialized
[ 49.924041] Bluetooth: RFCOMM TTY layer initialized
[ 49.924043] Bluetooth: RFCOMM ver 1.8
[ 61.651131] NET: Registered protocol family 10
[ 61.651292] lo: Disabled Privacy Extensions
[ 61.651393] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 63.146648] UDF-fs: No VRS found
[ 913.084825] r8169: eth0: link up
[ 913.086720] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 915.259191] NET: Registered protocol family 17
[ 923.277065] eth0: no IPv6 routers present
[ 939.167216] eth0: no IPv6 routers present
[ 1028.002078] r8169: eth0: link down
[ 1029.657500] r8169: eth0: link up
[ 1029.659389] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 1036.533101] r8169: eth0: link down
[ 1038.321641] r8169: eth0: link up
[ 1038.323536] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 1049.237507] eth0: no IPv6 routers present
[ 1064.999615] eth0: no IPv6 routers present