rendered paste body[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Linux version 2.6.25.4-custom (root@amrik) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Fri May 23 18:36:17 EDT 2008
[ 0.000000] Command line: root=UUID=59efc93d-ea9c-488d-bdf6-d88c10384b8f ro quiet splash
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000008f000 (usable)
[ 0.000000] BIOS-e820: 000000000008f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bfd64000 (usable)
[ 0.000000] BIOS-e820: 00000000bfd64000 - 00000000bfd6c000 (reserved)
[ 0.000000] BIOS-e820: 00000000bfd6c000 - 00000000bfdf4000 (usable)
[ 0.000000] BIOS-e820: 00000000bfdf4000 - 00000000bfdf9000 (reserved)
[ 0.000000] BIOS-e820: 00000000bfdf9000 - 00000000bfe76000 (usable)
[ 0.000000] BIOS-e820: 00000000bfe76000 - 00000000bfeee000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bfeee000 - 00000000bfef1000 (usable)
[ 0.000000] BIOS-e820: 00000000bfef1000 - 00000000bfeff000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bfeff000 - 00000000bff00000 (usable)
[ 0.000000] BIOS-e820: 00000000bff00000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] Entering add_active_range(0, 0, 143) 0 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 256, 785764) 1 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 785772, 785908) 2 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 785913, 786038) 3 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 786158, 786161) 4 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 786175, 786176) 5 entries of 3200 used
[ 0.000000] end_pfn_map = 1048576
[ 0.000000] DMI 2.4 present.
[ 0.000000] ACPI: RSDP 000FE020, 0014 (r0 GATEWA)
[ 0.000000] ACPI: RSDT BFEFD038, 0040 (r1 GATEWA SYSTEM 3E 1000013)
[ 0.000000] ACPI: FACP BFEFC000, 0074 (r1 GATEWA SYSTEM 3E MSFT 1000013)
[ 0.000000] ACPI: DSDT BFEF7000, 40B2 (r1 GATEWA SYSTEM 3E MSFT 1000013)
[ 0.000000] ACPI: FACS BFEAF000, 0040
[ 0.000000] ACPI: APIC BFEF6000, 0078 (r1 GATEWA SYSTEM 3E MSFT 1000013)
[ 0.000000] ACPI: WDDT BFEF5000, 0040 (r1 GATEWA SYSTEM 3E MSFT 1000013)
[ 0.000000] ACPI: MCFG BFEF4000, 003C (r1 GATEWA SYSTEM 3E MSFT 1000013)
[ 0.000000] ACPI: ASF! BFEF3000, 00A6 (r32 GATEWA SYSTEM 3E MSFT 1000013)
[ 0.000000] ACPI: HPET BFEF2000, 0038 (r1 GATEWA SYSTEM 3E MSFT 1000013)
[ 0.000000] ACPI: SLIC BFEF1000, 0176 (r1 GATEWA SYSTEM 3E MSFT 1000013)
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-00000000bff00000
[ 0.000000] Entering add_active_range(0, 0, 143) 0 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 256, 785764) 1 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 785772, 785908) 2 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 785913, 786038) 3 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 786158, 786161) 4 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 786175, 786176) 5 entries of 3200 used
[ 0.000000] Bootmem setup node 0 0000000000000000-00000000bff00000
[ 0.000000] NODE_DATA [000000000000d000 - 0000000000013fff]
[ 0.000000] bootmap [0000000000014000 - 000000000002bfdf] pages 18
[ 0.000000] early res: 0 [0-fff] BIOS data page
[ 0.000000] early res: 1 [6000-7fff] SMP_TRAMPOLINE
[ 0.000000] early res: 2 [200000-6bdb67] TEXT DATA BSS
[ 0.000000] early res: 3 [35625000-37fef3c7] RAMDISK
[ 0.000000] early res: 4 [99000-9ffff] EBDA
[ 0.000000] early res: 5 [8000-cfff] PGTABLE
[ 0.000000] [ffffe20000000000-ffffe200001fffff] PMD ->ffff810001200000 on node 0
[ 0.000000] [ffffe20000200000-ffffe200003fffff] PMD ->ffff810001600000 on node 0
[ 0.000000] [ffffe20000400000-ffffe200005fffff] PMD ->ffff810001a00000 on node 0
[ 0.000000] [ffffe20000600000-ffffe200007fffff] PMD ->ffff810001e00000 on node 0
[ 0.000000] [ffffe20000800000-ffffe200009fffff] PMD ->ffff810002200000 on node 0
[ 0.000000] [ffffe20000a00000-ffffe20000bfffff] PMD ->ffff810002600000 on node 0
[ 0.000000] [ffffe20000c00000-ffffe20000dfffff] PMD ->ffff810002a00000 on node 0
[ 0.000000] [ffffe20000e00000-ffffe20000ffffff] PMD ->ffff810002e00000 on node 0
[ 0.000000] [ffffe20001000000-ffffe200011fffff] PMD ->ffff810003200000 on node 0
[ 0.000000] [ffffe20001200000-ffffe200013fffff] PMD ->ffff810003600000 on node 0
[ 0.000000] [ffffe20001400000-ffffe200015fffff] PMD ->ffff810003a00000 on node 0
[ 0.000000] [ffffe20001600000-ffffe200017fffff] PMD ->ffff810003e00000 on node 0
[ 0.000000] [ffffe20001800000-ffffe200019fffff] PMD ->ffff810004200000 on node 0
[ 0.000000] [ffffe20001a00000-ffffe20001bfffff] PMD ->ffff810004600000 on node 0
[ 0.000000] [ffffe20001c00000-ffffe20001dfffff] PMD ->ffff810004a00000 on node 0
[ 0.000000] [ffffe20001e00000-ffffe20001ffffff] PMD ->ffff810004e00000 on node 0
[ 0.000000] [ffffe20002000000-ffffe200021fffff] PMD ->ffff810005200000 on node 0
[ 0.000000] [ffffe20002200000-ffffe200023fffff] PMD ->ffff810005600000 on node 0
[ 0.000000] [ffffe20002400000-ffffe200025fffff] PMD ->ffff810005a00000 on node 0
[ 0.000000] [ffffe20002600000-ffffe200027fffff] PMD ->ffff810005e00000 on node 0
[ 0.000000] [ffffe20002800000-ffffe200029fffff] PMD ->ffff810006200000 on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] DMA32 4096 -> 1048576
[ 0.000000] Normal 1048576 -> 1048576
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[6] active PFN ranges
[ 0.000000] 0: 0 -> 143
[ 0.000000] 0: 256 -> 785764
[ 0.000000] 0: 785772 -> 785908
[ 0.000000] 0: 785913 -> 786038
[ 0.000000] 0: 786158 -> 786161
[ 0.000000] 0: 786175 -> 786176
[ 0.000000] On node 0 totalpages: 785916
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 1230 pages reserved
[ 0.000000] DMA zone: 2697 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 10692 pages used for memmap
[ 0.000000] DMA32 zone: 771241 pages, LIFO batch:31
[ 0.000000] Normal zone: 0 pages used for memmap
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 (Bootup-CPU)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] Processor #1
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Setting APIC routing to flat
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] PM: Registered nosave memory: 000000000008f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000bfd64000 - 00000000bfd6c000
[ 0.000000] PM: Registered nosave memory: 00000000bfdf4000 - 00000000bfdf9000
[ 0.000000] PM: Registered nosave memory: 00000000bfe76000 - 00000000bfeee000
[ 0.000000] PM: Registered nosave memory: 00000000bfef1000 - 00000000bfeff000
[ 0.000000] Allocating PCI resources starting at c4000000 (gap: c0000000:3ff80000)
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] PERCPU: Allocating 35096 bytes of per cpu data
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 773938
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: root=UUID=59efc93d-ea9c-488d-bdf6-d88c10384b8f ro quiet splash
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] TSC calibrated against PM_TIMER
[ 0.000002] time.c: Detected 1999.932 MHz processor.
[ 0.001187] Console: colour VGA+ 80x25
[ 0.001190] console [tty0] enabled
[ 0.001215] Checking aperture...
[ 0.001224] Calgary: detecting Calgary via BIOS EBDA area
[ 0.001228] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.004000] Memory: 3052548k/3144704k available (2498k kernel code, 91116k reserved, 1305k data, 332k init)
[ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated
[ 0.004000] SLUB: Genslabs=13, HWalign=64, Order=0-1, MinObjects=4, CPUs=4, Nodes=1
[ 0.004000] hpet clockevent registered
[ 0.080007] Calibrating delay using timer specific routine.. 4002.98 BogoMIPS (lpj=8005961)
[ 0.080035] Security Framework initialized
[ 0.080043] SELinux: Disabled at boot.
[ 0.080047] Capability LSM initialized
[ 0.080440] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.083262] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.084675] Mount-cache hash table entries: 256
[ 0.084840] Initializing cgroup subsys ns
[ 0.084845] Initializing cgroup subsys cpuacct
[ 0.084858] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.084859] CPU: L2 cache: 1024K
[ 0.084862] CPU 0/0 -> Node 0
[ 0.084863] CPU: Physical Processor ID: 0
[ 0.084865] CPU: Processor Core ID: 0
[ 0.084872] CPU0: Thermal monitoring enabled (TM2)
[ 0.084873] using mwait in idle threads.
[ 0.084883] ACPI: Core revision 20070126
[ 0.131964] Using local APIC timer interrupts.
[ 0.132009] APIC timer calibration result 12499570
[ 0.132011] Detected 12.499 MHz APIC timer.
[ 0.132133] Booting processor 1/2 APIC 0x1
[ 0.004000] Initializing CPU#1
[ 0.004000] Calibrating delay using timer specific routine.. 3999.90 BogoMIPS (lpj=7999810)
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 1024K
[ 0.004000] CPU 1/1 -> Node 0
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 1
[ 0.004000] CPU1: Thermal monitoring enabled (TM2)
[ 0.004000] Intel(R) Pentium(R) Dual CPU E2180 @ 2.00GHz stepping 0d
[ 0.220290] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.224041] Brought up 2 CPUs
[ 0.224112] CPU0 attaching sched-domain:
[ 0.224115] domain 0: span 03
[ 0.224116] groups: 01 02
[ 0.224119] domain 1: span 03
[ 0.224120] groups: 03
[ 0.224123] CPU1 attaching sched-domain:
[ 0.224124] domain 0: span 03
[ 0.224125] groups: 02 01
[ 0.224128] domain 1: span 03
[ 0.224129] groups: 03
[ 0.224383] net_namespace: 1016 bytes
[ 0.224547] Time: 18:29:11 Date: 05/27/08
[ 0.224572] NET: Registered protocol family 16
[ 0.224746] ACPI: bus type pci registered
[ 0.224814] PCI: Found Intel Corporation 945G/GZ/P/PL Express Memory Controller Hub without MMCONFIG support.
[ 0.224817] PCI: Using configuration type 1
[ 0.226120] ACPI: EC: Look up EC in DSDT
[ 0.228034] ACPI: Interpreter enabled
[ 0.228036] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.228049] ACPI: Using IOAPIC for interrupt routing
[ 0.231429] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.232739] PCI: Transparent bridge - 0000:00:1e.0
[ 0.232777] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.233079] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
[ 0.233416] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[ 0.233523] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
[ 0.233627] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
[ 0.233731] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
[ 0.233837] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT]
[ 0.237191] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.237287] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12)
[ 0.237381] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *9 10 11 12)
[ 0.237473] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 *10 11 12)
[ 0.237565] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.237658] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[ 0.237751] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 *9 10 11 12)
[ 0.237843] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.238068] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.238095] pnp: PnP ACPI init
[ 0.238102] ACPI: bus type pnp registered
[ 0.240606] pnp: PnP ACPI: found 12 devices
[ 0.240608] ACPI: ACPI bus type pnp unregistered
[ 0.240873] PCI: Using ACPI for IRQ routing
[ 0.240876] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 0.260038] NET: Registered protocol family 8
[ 0.260041] NET: Registered protocol family 20
[ 0.260100] PCI-GART: No AMD northbridge found.
[ 0.260106] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.260112] hpet0: 3 64-bit timers, 14318180 Hz
[ 0.276053] system 00:01: iomem range 0xf0000000-0xf3ffffff has been reserved
[ 0.276058] system 00:01: iomem range 0xfed13000-0xfed13fff has been reserved
[ 0.276062] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
[ 0.276066] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
[ 0.276070] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
[ 0.276074] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.276078] system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 0.276081] system 00:01: iomem range 0xfed45000-0xfed99fff has been reserved
[ 0.276085] system 00:01: iomem range 0xc0000-0xdffff has been reserved
[ 0.276089] system 00:01: iomem range 0xe0000-0xfffff could not be reserved
[ 0.276102] system 00:06: ioport range 0x500-0x53f has been reserved
[ 0.276105] system 00:06: ioport range 0x400-0x47f has been reserved
[ 0.276109] system 00:06: ioport range 0x680-0x6ff has been reserved
[ 0.276585] PCI: Failed to allocate mem resource #6:20000@d0000000 for 0000:01:00.0
[ 0.276626] PCI: Bridge: 0000:00:01.0
[ 0.276628] IO window: 2000-2fff
[ 0.276632] MEM window: 0xd0000000-0xd2ffffff
[ 0.276634] PREFETCH window: 0x00000000c0000000-0x00000000cfffffff
[ 0.276638] PCI: Bridge: 0000:00:1c.0
[ 0.276639] IO window: disabled.
[ 0.276643] MEM window: disabled.
[ 0.276646] PREFETCH window: disabled.
[ 0.276651] PCI: Bridge: 0000:00:1c.2
[ 0.276652] IO window: disabled.
[ 0.276656] MEM window: disabled.
[ 0.276659] PREFETCH window: disabled.
[ 0.276664] PCI: Bridge: 0000:00:1c.3
[ 0.276665] IO window: disabled.
[ 0.276669] MEM window: 0xd3000000-0xd31fffff
[ 0.276672] PREFETCH window: disabled.
[ 0.276677] PCI: Bridge: 0000:00:1c.4
[ 0.276678] IO window: disabled.
[ 0.276682] MEM window: disabled.
[ 0.276685] PREFETCH window: disabled.
[ 0.276690] PCI: Bridge: 0000:00:1c.5
[ 0.276691] IO window: disabled.
[ 0.276695] MEM window: disabled.
[ 0.276698] PREFETCH window: disabled.
[ 0.276703] PCI: Bridge: 0000:00:1e.0
[ 0.276705] IO window: 1000-1fff
[ 0.276709] MEM window: 0xd3200000-0xd32fffff
[ 0.276712] PREFETCH window: disabled.
[ 0.276728] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 0.276732] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 0.276751] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 0.276756] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 0.276772] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 0.276776] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 0.276793] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19
[ 0.276797] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[ 0.276812] ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 17
[ 0.276816] PCI: Setting latency timer of device 0000:00:1c.4 to 64
[ 0.276831] ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 16 (level, low) -> IRQ 16
[ 0.276836] PCI: Setting latency timer of device 0000:00:1c.5 to 64
[ 0.276845] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 0.276858] NET: Registered protocol family 2
[ 0.312232] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.313454] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.319075] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.319752] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.319756] TCP reno registered
[ 0.328282] checking if image is initramfs...<7>Switched to high resolution mode on CPU 1
[ 0.504044] Switched to high resolution mode on CPU 0
[ 2.395991] it is
[ 4.570365] Freeing initrd memory: 42792k freed
[ 4.371817] audit: initializing netlink socket (disabled)
[ 4.371837] type=2000 audit(1211912954.592:1): initialized
[ 4.373924] VFS: Disk quotas dquot_6.5.1
[ 4.373995] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 4.374119] io scheduler noop registered
[ 4.374121] io scheduler anticipatory registered
[ 4.374122] io scheduler deadline registered
[ 4.374214] io scheduler cfq registered (default)
[ 4.374417] pci 0000:01:00.0: Boot video device
[ 4.374429] pci 0000:07:08.0: Firmware left e100 interrupts enabled; disabling
[ 4.374510] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 4.374538] assign_interrupt_mode Found MSI capability
[ 4.374567] Allocate Port Service[0000:00:01.0:pcie00]
[ 4.374638] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 4.374666] assign_interrupt_mode Found MSI capability
[ 4.374696] Allocate Port Service[0000:00:1c.0:pcie00]
[ 4.374730] Allocate Port Service[0000:00:1c.0:pcie02]
[ 4.374802] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 4.374830] assign_interrupt_mode Found MSI capability
[ 4.374860] Allocate Port Service[0000:00:1c.2:pcie00]
[ 4.374889] Allocate Port Service[0000:00:1c.2:pcie02]
[ 4.374963] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[ 4.374991] assign_interrupt_mode Found MSI capability
[ 4.375021] Allocate Port Service[0000:00:1c.3:pcie00]
[ 4.375050] Allocate Port Service[0000:00:1c.3:pcie02]
[ 4.375122] PCI: Setting latency timer of device 0000:00:1c.4 to 64
[ 4.375150] assign_interrupt_mode Found MSI capability
[ 4.375180] Allocate Port Service[0000:00:1c.4:pcie00]
[ 4.375211] Allocate Port Service[0000:00:1c.4:pcie02]
[ 4.375287] PCI: Setting latency timer of device 0000:00:1c.5 to 64
[ 4.375315] assign_interrupt_mode Found MSI capability
[ 4.375344] Allocate Port Service[0000:00:1c.5:pcie00]
[ 4.375373] Allocate Port Service[0000:00:1c.5:pcie02]
[ 4.394680] Real Time Clock Driver v1.12ac
[ 4.394765] hpet_resources: 0xfed00000 is busy
[ 4.394811] Linux agpgart interface v0.103
[ 4.394813] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 4.394931] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 4.395518] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 4.396262] brd: module loaded
[ 4.396326] input: Macintosh mouse button emulation as /class/input/input0
[ 4.396412] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 4.396415] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 4.396922] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 4.424540] mice: PS/2 mouse device common for all mice
[ 4.424578] cpuidle: using governor ladder
[ 4.424580] cpuidle: using governor menu
[ 4.424940] NET: Registered protocol family 1
[ 4.425085] registered taskstats version 1
[ 4.425200] Magic number: 8:857:494
[ 4.425311] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 4.425313] BIOS EDD facility v0.16 2004-Jun-25, 6 devices found
[ 4.425494] Freeing unused kernel memory: 332k freed
[ 4.669299] input: AT Translated Set 2 keyboard as /class/input/input1
[ 5.857452] fuse init (API version 7.9)
[ 5.908024] ACPI: ACPI0007:00 is registered as cooling_device0
[ 5.908084] ACPI: ACPI0007:01 is registered as cooling_device1
[ 6.477480] usbcore: registered new interface driver usbfs
[ 6.477503] usbcore: registered new interface driver hub
[ 6.488685] usbcore: registered new device driver usb
[ 6.746961] e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
[ 6.746964] e100: Copyright(c) 1999-2006 Intel Corporation
[ 6.747018] ACPI: PCI Interrupt 0000:07:08.0[A] -> GSI 20 (level, low) -> IRQ 20
[ 6.552330] USB Universal Host Controller Interface driver v3.0
[ 6.782989] e100: eth0: e100_probe: addr 0xd3204000, irq 20, MAC addr 00:19:d1:a8:38:cd
[ 6.562529] ACPI: PCI Interrupt 0000:07:05.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 6.791239] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
[ 6.791250] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 6.791253] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 6.791408] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 6.791438] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00003080
[ 6.791553] usb usb1: configuration #1 chosen from 1 choice
[ 6.791572] hub 1-0:1.0: USB hub found
[ 6.791578] hub 1-0:1.0: 2 ports detected
[ 6.612662] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[d3205000-d32057ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 6.613009] No dock devices found.
[ 6.623976] SCSI subsystem initialized
[ 6.649082] libata version 3.00 loaded.
[ 6.892546] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
[ 6.892557] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 6.892560] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 6.892582] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 6.892612] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00003060
[ 6.892710] usb usb2: configuration #1 chosen from 1 choice
[ 6.892731] hub 2-0:1.0: USB hub found
[ 6.892737] hub 2-0:1.0: 2 ports detected
[ 6.956582] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 6.956595] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 6.956600] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 6.956629] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 6.956658] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00003040
[ 6.956753] usb usb3: configuration #1 chosen from 1 choice
[ 6.956775] hub 3-0:1.0: USB hub found
[ 6.956781] hub 3-0:1.0: 2 ports detected
[ 6.992562] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
[ 6.992574] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 6.992579] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 6.992628] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[ 6.992658] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00003020
[ 6.992750] usb usb4: configuration #1 chosen from 1 choice
[ 6.992772] hub 4-0:1.0: USB hub found
[ 6.992778] hub 4-0:1.0: 2 ports detected
[ 6.848440] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
[ 6.848440] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 6.848440] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 6.848440] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[ 6.852115] ehci_hcd 0000:00:1d.7: debug port 1
[ 6.852120] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 6.852127] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd3304400
[ 6.864457] usb 2-1: new low speed USB device using uhci_hcd and address 2
[ 6.872447] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 6.872544] usb usb5: configuration #1 chosen from 1 choice
[ 6.872564] hub 5-0:1.0: USB hub found
[ 6.872572] hub 5-0:1.0: 8 ports detected
[ 7.100502] hub 2-0:1.0: unable to enumerate USB device on port 1
[ 7.120454] ahci 0000:00:1f.2: version 3.0
[ 7.120454] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
[ 7.256491] hub 5-0:1.0: unable to enumerate USB device on port 3
[ 7.340483] usb 5-8: new high speed USB device using ehci_hcd and address 3
[ 7.402822] usb 5-8: configuration #1 chosen from 1 choice
[ 7.284619] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0090270001d22f2e]
[ 7.560498] usb 2-1: new low speed USB device using uhci_hcd and address 3
[ 7.616516] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl RAID mode
[ 7.616521] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part
[ 7.616527] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 7.616782] scsi0 : ahci
[ 7.617084] scsi1 : ahci
[ 7.617269] scsi2 : ahci
[ 7.617451] scsi3 : ahci
[ 7.617522] ata1: SATA max UDMA/133 abar m1024@0xd3304000 port 0xd3304100 irq 505
[ 7.617525] ata2: SATA max UDMA/133 abar m1024@0xd3304000 port 0xd3304180 irq 505
[ 7.617528] ata3: SATA max UDMA/133 abar m1024@0xd3304000 port 0xd3304200 irq 505
[ 7.617531] ata4: SATA max UDMA/133 abar m1024@0xd3304000 port 0xd3304280 irq 505
[ 7.644487] usb 2-1: configuration #1 chosen from 1 choice
[ 7.644487] usbcore: registered new interface driver libusual
[ 7.445610] Initializing USB Mass Storage driver...
[ 7.445692] scsi4 : SCSI emulation for USB Mass Storage devices
[ 7.445755] usbcore: registered new interface driver usb-storage
[ 7.445758] USB Mass Storage support registered.
[ 7.445950] usb-storage: device found at 3
[ 7.445952] usb-storage: waiting for device to settle before scanning
[ 7.676507] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 7.808498] ata1.00: ATA-7: ST3500630AS, 3.AAD, max UDMA/133
[ 7.808498] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 7.832499] ata1.00: configured for UDMA/133
[ 7.852503] ata2: SATA link down (SStatus 0 SControl 300)
[ 8.004525] ata3: SATA link down (SStatus 0 SControl 300)
[ 8.152535] ata4: SATA link down (SStatus 0 SControl 300)
[ 8.128518] scsi 0:0:0:0: Direct-Access ATA ST3500630AS 3.AA PQ: 0 ANSI: 5
[ 8.152789] ata_piix 0000:00:1f.1: version 2.12
[ 8.152803] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
[ 8.152847] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 8.152932] scsi5 : ata_piix
[ 8.152981] scsi6 : ata_piix
[ 8.156964] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x30b0 irq 14
[ 8.156967] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x30b8 irq 15
[ 8.304931] ata5.00: ATAPI: Optiarc DVD RW AD-7173A, 1-03, max UDMA/66
[ 8.372827] ata5.00: configured for UDMA/66
[ 8.292528] ata6: port disabled. ignoring.
[ 8.377334] scsi 5:0:0:0: CD-ROM Optiarc DVD RW AD-7173A 1-03 PQ: 0 ANSI: 5
[ 8.392992] Driver 'sd' needs updating - please use bus_type methods
[ 8.393077] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
[ 8.393089] sd 0:0:0:0: [sda] Write Protect is off
[ 8.393091] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 8.393109] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 8.393156] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
[ 8.393166] sd 0:0:0:0: [sda] Write Protect is off
[ 8.393168] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 8.393184] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 8.393188] sda: sda1 sda2 < sda5 >
[ 8.429487] sd 0:0:0:0: [sda] Attached SCSI disk
[ 8.349494] usbcore: registered new interface driver hiddev
[ 8.438593] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 8.438614] scsi 5:0:0:0: Attached scsi generic sg1 type 5
[ 8.441877] Driver 'sr' needs updating - please use bus_type methods
[ 8.444384] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 8.444389] Uniform CD-ROM driver Revision: 3.20
[ 8.444441] sr 5:0:0:0: Attached scsi CD-ROM sr0
[ 8.362081] input: USB Optical Mouse as /class/input/input2
[ 8.380714] input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1d.1-1
[ 8.380739] usbcore: registered new interface driver usbhid
[ 8.380743] drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 8.652858] PM: Starting manual resume from disk
[ 8.652861] PM: Resume from partition 8:5
[ 8.652862] PM: Checking hibernation image.
[ 8.653002] PM: Resume from disk failed.
[ 8.615767] kjournald starting. Commit interval 5 seconds
[ 8.615795] EXT3-fs: mounted filesystem with ordered data mode.
[ 10.597878] usb-storage: device scan complete
[ 10.598478] scsi 4:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
[ 10.599109] scsi 4:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
[ 10.599727] scsi 4:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
[ 10.600352] scsi 4:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
[ 10.601579] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 10.601623] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 10.602691] sd 4:0:0:1: [sdc] Attached SCSI removable disk
[ 10.602738] sd 4:0:0:1: Attached scsi generic sg3 type 0
[ 10.603820] sd 4:0:0:2: [sdd] Attached SCSI removable disk
[ 10.603858] sd 4:0:0:2: Attached scsi generic sg4 type 0
[ 10.604900] sd 4:0:0:3: [sde] Attached SCSI removable disk
[ 10.604942] sd 4:0:0:3: Attached scsi generic sg5 type 0
[ 13.556979] e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
[ 15.158067] NET: Registered protocol family 10
[ 15.158453] lo: Disabled Privacy Extensions
[ 15.182408] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 13.025117] input: Power Button (FF) as /class/input/input3
[ 15.273556] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 13.084891] ACPI: Power Button (FF) [PWRF]
[ 13.084945] input: Sleep Button (CM) as /class/input/input4
[ 13.148888] ACPI: Sleep Button (CM) [SLPB]
[ 13.297780] input: PC Speaker as /class/input/input5
[ 13.592470] parport_pc 00:07: reported by Plug and Play ACPI
[ 13.592528] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 15.877005] warning: `ntpd' uses 32-bit capabilities (legacy support in use)
[ 15.987538] nvidia: module license 'NVIDIA' taints kernel.
[ 16.242567] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 16.242577] PCI: Setting latency timer of device 0000:01:00.0 to 64
[ 14.027697] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 169.12 Thu Feb 14 17:51:09 PST 2008
[ 16.567514] Linux video capture interface: v2.00
[ 16.637389] cx23885 driver version 0.0.1 loaded
[ 16.637446] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 19 (level, low) -> IRQ 19
[ 16.637451] cx23885[0]: Your board isn't known (yet) to the driver. You can
[ 16.637452] cx23885[0]: try to pick one of the existing card configs via
[ 16.637453] cx23885[0]: card=<n> insmod option. Updating to the latest
[ 16.637455] cx23885[0]: version might help as well.
[ 16.637457] cx23885[0]: Here is a list of valid choices for the card=<n> insmod option:
[ 16.637459] cx23885[0]: card=0 -> UNKNOWN/GENERIC
[ 16.637460] cx23885[0]: card=1 -> Hauppauge WinTV-HVR1800lp
[ 16.637462] cx23885[0]: card=2 -> Hauppauge WinTV-HVR1800
[ 16.637464] cx23885[0]: card=3 -> Hauppauge WinTV-HVR1250
[ 16.637466] cx23885[0]: card=4 -> DViCO FusionHDTV5 Express
[ 16.637468] cx23885[0]: card=5 -> Hauppauge WinTV-HVR1500Q
[ 16.637469] cx23885[0]: card=6 -> Hauppauge WinTV-HVR1500
[ 16.637547] CORE cx23885[0]: subsystem: 1461:d439, board: UNKNOWN/GENERIC [card=0,autodetected]
[ 14.505484] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
[ 14.505515] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 16.738463] cx23885[0]: i2c bus 0 registered
[ 16.738655] cx23885[0]: i2c bus 1 registered
[ 16.738752] cx23885[0]: i2c bus 2 registered
[ 14.528931] ALSA sound/pci/hda/hda_intel.c:1887: hda-intel: no codecs found!
[ 14.528973] ACPI: PCI interrupt for device 0000:00:1b.0 disabled
[ 16.765960] cx23885_dev_checkrevision() Hardware revision = 0xb1
[ 16.765967] cx23885[0]/0: found at 0000:04:00.0, rev: 15, irq: 19, latency: 0, mmio: 0xd3000000
[ 16.765973] PCI: Setting latency timer of device 0000:04:00.0 to 64
[ 16.920267] loop: module loaded
[ 16.940570] lp0: using parport0 (interrupt-driven).
[ 17.046975] ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 19
[ 17.079003] coretemp coretemp.0: Using relative temperature scale!
[ 17.079049] coretemp coretemp.1: Using relative temperature scale!
[ 17.150561] Adding 9068652k swap on /dev/sda5. Priority:-1 extents:1 across:9068652k
[ 15.125735] EXT3 FS on sda1, internal journal
[ 18.044861] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 18.624833] toshiba_acpi: Unknown parameter `hotkeys_over_acpi'
[ 19.673855] ppdev: user-space parallel port driver
[ 21.608296] Bluetooth: Core ver 2.11
[ 21.609939] NET: Registered protocol family 31
[ 21.609944] Bluetooth: HCI device and connection manager initialized
[ 21.609949] Bluetooth: HCI socket layer initialized
[ 18.856566] Bluetooth: L2CAP ver 2.9
[ 18.856570] Bluetooth: L2CAP socket layer initialized
[ 21.712811] Bluetooth: RFCOMM socket layer initialized
[ 21.713264] Bluetooth: RFCOMM TTY layer initialized
[ 21.713268] Bluetooth: RFCOMM ver 1.8
[ 22.918013] NVRM: bad caching on address 0xffff8100ba31d000: actual 0x173 != expected 0x17b
[ 22.918020] NVRM: please see the README section on Cache Aliasing for more information
[ 22.919461] NVRM: bad caching on address 0xffff8100ba31f000: actual 0x173 != expected 0x17b
[ 22.920038] NVRM: bad caching on address 0xffff8100bb148000: actual 0x173 != expected 0x17b
[ 22.920600] NVRM: bad caching on address 0xffff8100bb14a000: actual 0x173 != expected 0x17b
[ 22.921166] NVRM: bad caching on address 0xffff8100bb14b000: actual 0x173 != expected 0x17b
[ 22.921713] NVRM: bad caching on address 0xffff8100bdd40000: actual 0x173 != expected 0x17b
[ 22.922279] NVRM: bad caching on address 0xffff8100bdd42000: actual 0x173 != expected 0x17b
[ 22.922848] NVRM: bad caching on address 0xffff8100bdd43000: actual 0x173 != expected 0x17b
[ 22.923421] NVRM: bad caching on address 0xffff8100be2da000: actual 0x173 != expected 0x17b
[ 22.923994] NVRM: bad caching on address 0xffff8100ba5eb000: actual 0x173 != expected 0x17b
[ 23.661498] eth0: no IPv6 routers present
[ 23.860214] /dev/vmmon[5803]: VMCI: Driver initialized.
[ 23.865934] /dev/vmmon[5803]: Module vmmon: registered with major=10 minor=165
[ 23.866491] /dev/vmmon[5803]: Initial HV check: anyNotCapable=1 anyUnlocked=0 anyEnabled=0 anyDisabled=0
[ 23.866496] /dev/vmmon[5803]: Module vmmon: initialized
[ 24.120349] /dev/vmnet: open called by PID 5854 (vmnet-bridge)
[ 24.120361] /dev/vmnet: hub 0 does not exist, allocating memory.
[ 24.120370] /dev/vmnet: port on hub 0 successfully opened
[ 24.120382] bridge-eth0: enabling the bridge
[ 24.120386] bridge-eth0: up
[ 24.120387] bridge-eth0: already up
[ 24.120389] bridge-eth0: attached
[ 24.289533] /dev/vmnet: open called by PID 5870 (vmnet-dhcpd)
[ 24.289533] /dev/vmnet: hub 1 does not exist, allocating memory.
[ 24.289534] /dev/vmnet: port on hub 1 successfully opened
[ 24.341530] /dev/vmnet: open called by PID 5881 (vmnet-dhcpd)
[ 24.341972] /dev/vmnet: hub 8 does not exist, allocating memory.
[ 24.342348] /dev/vmnet: port on hub 8 successfully opened
[ 24.377539] /dev/vmnet: open called by PID 5886 (vmnet-natd)
[ 24.377566] /dev/vmnet: port on hub 8 successfully opened
[ 27.586121] /dev/vmnet: open called by PID 5978 (vmnet-netifup)
[ 27.586446] /dev/vmnet: port on hub 1 successfully opened
[ 27.630486] /dev/vmnet: open called by PID 5989 (vmnet-netifup)
[ 27.630813] /dev/vmnet: port on hub 8 successfully opened
[ 29.249849] vmnet1: no IPv6 routers present
[ 29.417859] vmnet8: no IPv6 routers present
[ 41.742905] VMBlock warning: DentryOpRevalidate: invalid args from kernel
[ 34.873970] VMBlock warning: DentryOpRevalidate: invalid args from kernel
[ 41.742963] VMBlock warning: DentryOpRevalidate: invalid args from kernel
[ 34.877988] VMBlock warning: DentryOpRevalidate: invalid args from kernel
[ 41.760926] VMBlock warning: DentryOpRevalidate: invalid args from kernel