rendered paste bodyInitializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.25.3-18.fc9.i586 (mockbuild@) (gcc version 4.3.0 20080428 (Red Hat 4.3.0-8) (GCC) ) #1 SMP Tue May 13 04:32:36 EDT 2008
BIOS-provided physical RAM map:
BIOS-e820: 0000000000001000 - 00000000000a0000 (usable)
BIOS-e820: 0000000000100000 - 000000000e000000 (usable)
0MB HIGHMEM available.
224MB LOWMEM available.
Scan SMP from c0000000 for 1024 bytes.
Scan SMP from c009fc00 for 1024 bytes.
Scan SMP from c00f0000 for 65536 bytes.
Using x86 segment limits to approximate NX protection
Entering add_active_range(0, 0, 57344) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 57344
HighMem 57344 -> 57344
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0 -> 57344
On node 0 totalpages: 57344
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 416 pages used for memmap
Normal zone: 52832 pages, LIFO batch:15
HighMem zone: 0 pages used for memmap
Movable zone: 0 pages used for memmap
DMI 2.2 present.
Using APIC driver default
ACPI: RSDP 000F0400, 0014 (r0 LXBIOS)
ACPI: RSDT 000F0424, 0028 (r1 LXBIOS RSDT 0 NONE 0)
ACPI: FACP 000F089A, 00F4 (r1 LXBIOS LXBACPI 0 LXB 0)
ACPI: DSDT 000F04AA, 03F0 (r1 LXBIOS LXB-DSDT 1 INTL 20060127)
ACPI: FACS 000F0468, 0042
ACPI: DMI BIOS year==0, assuming ACPI-capable machine
ACPI: PM-Timer IO Port: 0x408
Allocating PCI resources starting at 10000000 (gap: 0e000000:f2000000)
PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 56896
Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet
No local APIC present or hardware disabled
mapped APIC to ffffb000 (011cc000)
Initializing CPU#0
CPU 0 irqstacks, hard=c07ba000 soft=c079a000
PID hash table entries: 1024 (order: 10, 4096 bytes)
Detected 932.908 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 218808k/229376k available (2240k kernel code, 10000k reserved, 1121k data, 284k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xffc52000 - 0xfffff000 (3764 kB)
pkmap : 0xff400000 - 0xff800000 (4096 kB)
vmalloc : 0xce800000 - 0xff3fe000 ( 779 MB)
lowmem : 0xc0000000 - 0xce000000 ( 224 MB)
.init : 0xc0750000 - 0xc0797000 ( 284 kB)
.data : 0xc0630348 - 0xc0748800 (1121 kB)
.text : 0xc0400000 - 0xc0630348 (2240 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
CPA: page pool initialized 1 of 1 pages preallocated
SLUB: Genslabs=12, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
Calibrating delay using timer specific routine.. 1868.02 BogoMIPS (lpj=934014)
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
CPU: L1 I Cache: 64K (32 bytes/line), D cache 64K (32 bytes/line)
CPU: L2 Cache: 64K (32 bytes/line)
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 20k freed
ACPI: Core revision 20070126
ACPI: setting ELCR to 0020 (from 0220)
CPU0: Centaur VIA Ezra stepping 0a
SMP motherboard not detected.
Local APIC not detected. Using dummy APIC emulation.
Brought up 1 CPUs
sizeof(vma)=84 bytes
sizeof(page)=32 bytes
sizeof(inode)=340 bytes
sizeof(dentry)=132 bytes
sizeof(ext3inode)=492 bytes
sizeof(buffer_head)=56 bytes
sizeof(skbuff)=176 bytes
sizeof(task_struct)=3712 bytes
CPU0 attaching sched-domain:
domain 0: span 00000001
groups: 00000001
net_namespace: 548 bytes
Booting paravirtualized kernel on bare hardware
Time: 23:00:00 Date: 05/24/08
NET: Registered protocol family 16
No dock devices found.
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfb260, last bus=1
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:11.0: quirk: region 0400-047f claimed by vt8235 PM
pci 0000:00:11.0: quirk: region 0f00-0f0f claimed by vt8235 SMB
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs *5 9 10)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *9 10)
ACPI: PCI Interrupt Link [LNKC] (IRQs 5 *9 10)
ACPI: PCI Interrupt Link [LNKD] (IRQs *5 9 10)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 0 devices
ACPI: ACPI bus type pnp unregistered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
PCI: Bridge: 0000:00:01.0
IO window: disabled.
MEM window: 0xdc000000-0xddffffff
PREFETCH window: 0x00000000d8000000-0x00000000dbffffff
PCI: Setting latency timer of device 0000:00:01.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP reno registered
checking if image is initramfs...<7>Switched to high resolution mode on CPU 0
it is
Freeing initrd memory: 3209k freed
apm: BIOS not found.
audit: initializing netlink socket (disabled)
type=2000 audit(1211670001.381:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
PCI: VIA PCI bridge detected. Disabling DAC.
pci 0000:01:00.0: Boot video device
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: CPU0 (power states: C1[C1] C2[C2])
ACPI: ACPI0007:00 is registered as cooling_device0
ACPI: Processor [CPU0] (supports 2 throttling states)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Non-volatile memory driver v1.2
Linux agpgart interface v0.103
agpgart: Detected VIA CLE266 chipset
agpgart: AGP aperture is 128M @ 0xd0000000
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
brd: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input0
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI No-Shortcut mode
registered taskstats version 1
Magic number: 8:200:50
Freeing unused kernel memory: 284k freed
Write protecting the kernel read-only data: 908k
Marking TSC unstable due to: TSC halts in idle.
PCI: Enabling device 0000:00:10.3 (0000 -> 0002)
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ACPI: PCI Interrupt 0000:00:10.3[D] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ 5
ehci_hcd 0000:00:10.3: EHCI Host Controller
ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:10.3: irq 5, io mem 0x10000000
ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.25.3-18.fc9.i586 ehci_hcd
usb usb1: SerialNumber: 0000:00:10.3
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
hub 1-0:1.0: over-current change on port 5
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 5
ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [LNKA] -> GSI 5 (level, low) -> IRQ 5
uhci_hcd 0000:00:10.0: UHCI Host Controller
uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:10.0: irq 5, io base 0x00001880
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
hub 1-0:1.0: over-current change on port 6
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.25.3-18.fc9.i586 uhci_hcd
usb usb2: SerialNumber: 0000:00:10.0
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 9
PCI: setting IRQ 9 as level-triggered
ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [LNKB] -> GSI 9 (level, low) -> IRQ 9
uhci_hcd 0000:00:10.1: UHCI Host Controller
uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:10.1: irq 9, io base 0x000018a0
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.25.3-18.fc9.i586 uhci_hcd
usb usb3: SerialNumber: 0000:00:10.1
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 9
ACPI: PCI Interrupt 0000:00:10.2[C] -> Link [LNKC] -> GSI 9 (level, low) -> IRQ 9
uhci_hcd 0000:00:10.2: UHCI Host Controller
uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:10.2: irq 9, io base 0x000018c0
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.25.3-18.fc9.i586 uhci_hcd
usb usb4: SerialNumber: 0000:00:10.2
SCSI subsystem initialized
Driver 'sd' needs updating - please use bus_type methods
libata version 3.00 loaded.
ACPI: PCI Interrupt 0000:00:11.1[A] -> Link [LNKA] -> GSI 5 (level, low) -> IRQ 5
ACPI: PCI interrupt for device 0000:00:11.1 disabled
pata_via 0000:00:11.1: version 0.3.3
ACPI: PCI Interrupt 0000:00:11.1[A] -> Link [LNKA] -> GSI 5 (level, low) -> IRQ 5
scsi0 : pata_via
scsi1 : pata_via
ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x18e0 irq 14
ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x18e8 irq 15
ata1.00: ATA-4: WDC AC28400R, 17.01J17, max UDMA/66
ata1.00: 16514064 sectors, multi 0: LBA
ata1.00: limited to UDMA/33 due to 40-wire cable
ata1.00: configured for UDMA/33
scsi 0:0:0:0: Direct-Access ATA WDC AC28400R 17.0 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 16514064 512-byte hardware sectors (8455 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 16514064 512-byte hardware sectors (8455 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI disk
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
type=1404 audit(1211670010.037:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
SELinux:8192 avtab hash slots allocated. Num of rules:166029
SELinux:8192 avtab hash slots allocated. Num of rules:166029
security: 8 users, 12 roles, 2308 types, 113 bools, 1 sens, 1024 cats
security: 72 classes, 166029 rules
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
SELinux: initialized (dev dm-0, type ext3), uses xattr
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
SELinux: policy loaded with handle_unknown=allow
type=1403 audit(1211670015.742:3): policy loaded auid=4294967295 ses=4294967295
sd 0:0:0:0: Attached scsi generic sg0 type 0
ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [LNKB] -> GSI 9 (level, low) -> IRQ 9
firewire_ohci: Added fw-ohci device 0000:00:0d.0, OHCI version 1.0
firewire_core: created device fw0: GUID 004063000001e9dc, S400
NET: Registered protocol family 23
via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [LNKA] -> GSI 5 (level, low) -> IRQ 5
eth0: VIA Rhine II at 0xfebff000, 00:40:63:c3:a9:35, IRQ 5.
eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1.
input: PC Speaker as /devices/platform/pcspkr/input/input2
input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button (FF) [PWRF]
ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [LNKC] -> GSI 9 (level, low) -> IRQ 9
PCI: Setting latency timer of device 0000:00:11.5 to 64
PCI: Enabling device 0000:00:11.6 (0000 -> 0001)
ACPI: PCI Interrupt 0000:00:11.6[C] -> Link [LNKC] -> GSI 9 (level, low) -> IRQ 9
PCI: Setting latency timer of device 0000:00:11.6 to 64
ACPI: PCI interrupt for device 0000:00:11.6 disabled
VIA 82xx Modem: probe of 0000:00:11.6 failed with error -13
device-mapper: multipath: version 1.0.5 loaded
loop: module loaded
EXT3 FS on dm-0, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev sda1, type ext3), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
Adding 524280k swap on /dev/mapper/VolGroup00-LogVol01. Priority:-1 extents:1 across:524280k
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ip6_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (4096 buckets, 16384 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
fuse init (API version 7.9)
SELinux: initialized (dev fusectl, type fusectl), uses genfs_contexts
Bluetooth: Core ver 2.11
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
Bluetooth: L2CAP ver 2.9
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.8
Bluetooth: BNEP (Ethernet Emulation) ver 1.2
Bluetooth: BNEP filters: protocol multicast
Bridge firewalling registered
pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
eth0: no IPv6 routers present
[drm] Initialized drm 1.1.0 20060810
ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 5 (level, low) -> IRQ 5
[drm] Initialized via 2.11.1 20070202 on minor 0
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode