rendered paste body[ 0.000000] Linux version 2.6.24-16-generic (buildd@palmer) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Thu Apr 10 13:23:42 UTC 2008 (Ubuntu 2.6.24-16.30-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
[ 0.000000] BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d2000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 0000000077e80000 (usable)
[ 0.000000] BIOS-e820: 0000000077e80000 - 0000000077e92000 (ACPI data)
[ 0.000000] BIOS-e820: 0000000077e92000 - 0000000077f00000 (ACPI NVS)
[ 0.000000] BIOS-e820: 0000000077f00000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] 1022MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000f85d0
[ 0.000000] Entering add_active_range(0, 0, 491136) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 491136
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 491136
[ 0.000000] On node 0 totalpages: 491136
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2045 pages used for memmap
[ 0.000000] HighMem zone: 259715 pages, LIFO batch:31
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP signature @ 0xC00F8530 checksum 0
[ 0.000000] ACPI: RSDP 000F8530, 0014 (r0 PTLTD )
[ 0.000000] ACPI: RSDT 77E8C396, 0038 (r1 GATEWA SYSTEM 20061127 LTP 0)
[ 0.000000] ACPI: FACP 77E91BFA, 0074 (r1 GATEWA SYSTEM 20061127 ATI F4240)
[ 0.000000] ACPI: DSDT 77E8C3CE, 582C (r1 GATEWA SYSTEM 20061127 MSFT 100000E)
[ 0.000000] ACPI: FACS 77E92FC0, 0040
[ 0.000000] ACPI: SSDT 77E91C6E, 0182 (r1 GATEWA SYSTEM 20061127 LTP 1)
[ 0.000000] ACPI: APIC 77E91DF0, 005E (r1 GATEWA SYSTEM 20061127 LTP 0)
[ 0.000000] ACPI: MCFG 77E91E4E, 003C (r1 GATEWA SYSTEM 20061127 LTP 0)
[ 0.000000] ACPI: SLIC 77E91E8A, 0176 (r1 GATEWA SYSTEM 20061127 LTP 0)
[ 0.000000] ATI board detected. Disabling timer routing over 8254.
[ 0.000000] ACPI: PM-Timer IO Port: 0x8008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 15:8 APIC version 16
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] Processor #1 15:8 APIC version 16
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level)
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
[ 0.000000] swsusp: Registered nosave memory region: 000000000009d000 - 000000000009e000
[ 0.000000] swsusp: Registered nosave memory region: 000000000009e000 - 00000000000a0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000d2000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000d2000 - 0000000000100000
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 487299
[ 0.000000] Kernel command line: root=UUID=4c0e5904-1ed1-438d-8cf6-e543b7377467 ro quiet splash
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 1596.113 MHz processor.
[ 15.362124] Console: colour VGA+ 80x25
[ 15.362128] console [tty0] enabled
[ 15.362470] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 15.362887] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 15.454096] Memory: 1935300k/1964544k available (2157k kernel code, 28000k reserved, 998k data, 364k init, 1047040k highmem)
[ 15.454105] virtual kernel memory layout:
[ 15.454106] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB)
[ 15.454108] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 15.454109] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 15.454110] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 15.454112] .init : 0xc041b000 - 0xc0476000 ( 364 kB)
[ 15.454113] .data : 0xc031b5a4 - 0xc0414dc4 ( 998 kB)
[ 15.454114] .text : 0xc0100000 - 0xc031b5a4 (2157 kB)
[ 15.454118] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 15.454156] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
[ 15.534111] Calibrating delay using timer specific routine.. 3195.55 BogoMIPS (lpj=6391118)
[ 15.534140] Security Framework initialized
[ 15.534147] SELinux: Disabled at boot.
[ 15.534163] AppArmor: AppArmor initialized
[ 15.534167] Failure registering capabilities with primary security module.
[ 15.534176] Mount-cache hash table entries: 512
[ 15.534300] CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000001f 00000000
[ 15.534310] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 15.534313] CPU: L2 Cache: 512K (64 bytes/line)
[ 15.534316] CPU 0(2) -> Core 0
[ 15.534318] CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000001f 00000000
[ 15.534331] Compat vDSO mapped to ffffe000.
[ 15.534342] Checking 'hlt' instruction... OK.
[ 15.550409] SMP alternatives: switching to UP code
[ 15.551782] Early unpacking initramfs... done
[ 15.950343] ACPI: Core revision 20070126
[ 15.950414] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 16.359890] CPU0: AMD Turion(tm) 64 X2 Mobile Technology TL-52 stepping 02
[ 16.359909] SMP alternatives: switching to SMP code
[ 16.360443] Booting processor 1/1 eip 3000
[ 16.371021] Initializing CPU#1
[ 16.449887] Calibrating delay using timer specific routine.. 3192.23 BogoMIPS (lpj=6384466)
[ 16.449894] CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000001f 00000000
[ 16.449902] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 16.449904] CPU: L2 Cache: 512K (64 bytes/line)
[ 16.449907] CPU 1(2) -> Core 1
[ 16.449909] AMD C1E detected late. Force timer broadcast.
[ 16.449911] CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000001f 00000000
[ 16.449502] CPU1: AMD Turion(tm) 64 X2 Mobile Technology TL-52 stepping 02
[ 16.449518] Total of 2 processors activated (6387.79 BogoMIPS).
[ 16.449686] ENABLING IO-APIC IRQs
[ 16.449870] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
[ 16.489692] Brought up 2 CPUs
[ 16.489719] CPU0 attaching sched-domain:
[ 16.489722] domain 0: span 03
[ 16.489724] groups: 01 02
[ 16.489728] CPU1 attaching sched-domain:
[ 16.489730] domain 0: span 03
[ 16.489732] groups: 02 01
[ 16.489945] net_namespace: 64 bytes
[ 16.489956] Booting paravirtualized kernel on bare hardware
[ 16.490487] Time: 17:06:53 Date: 05/22/08
[ 16.490515] NET: Registered protocol family 16
[ 16.490708] EISA bus registered
[ 16.490713] ACPI: bus type pci registered
[ 16.507389] PCI: BIOS BUG #81[49435000] found
[ 16.507430] PCI: Using configuration type 1
[ 16.507432] Setting up standard PCI resources
[ 16.509269] ACPI: EC: Look up EC in DSDT
[ 16.511682] ACPI: Interpreter enabled
[ 16.511686] ACPI: (supports S0 S3 S4 S5)
[ 16.511699] ACPI: Using IOAPIC for interrupt routing
[ 16.516390] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[ 16.516394] ACPI: EC: driver started in poll mode
[ 16.516436] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 16.517959] PCI: Transparent bridge - 0000:00:14.4
[ 16.518044] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 16.518210] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB4_._PRT]
[ 16.518331] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB5_._PRT]
[ 16.518463] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[ 16.518571] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[ 16.521219] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11) *0, disabled.
[ 16.521374] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11) *0, disabled.
[ 16.521526] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11) *0, disabled.
[ 16.521716] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11) *0, disabled.
[ 16.521868] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11) *0, disabled.
[ 16.522019] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11) *0, disabled.
[ 16.522171] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11) *0, disabled.
[ 16.522323] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11) *0, disabled.
[ 16.522475] ACPI: PCI Interrupt Link [LNKU] (IRQs 3 4 5 7 10 11) *0, disabled.
[ 16.522623] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 16.522655] pnp: PnP ACPI init
[ 16.522662] ACPI: bus type pnp registered
[ 16.525076] pnp: PnP ACPI: found 10 devices
[ 16.525079] ACPI: ACPI bus type pnp unregistered
[ 16.525083] PnPBIOS: Disabled by ACPI PNP
[ 16.525295] PCI: Using ACPI for IRQ routing
[ 16.525298] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 16.526035] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 16.537582] NET: Registered protocol family 8
[ 16.537585] NET: Registered protocol family 20
[ 16.537650] AppArmor: AppArmor Filesystem Enabled
[ 16.549584] system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
[ 16.549588] system 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 16.549592] system 00:01: iomem range 0xfee00000-0xfee00fff could not be reserved
[ 16.549601] system 00:08: ioport range 0x1080-0x1080 has been reserved
[ 16.549605] system 00:08: ioport range 0x220-0x22f has been reserved
[ 16.549608] system 00:08: ioport range 0x40b-0x40b has been reserved
[ 16.549611] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
[ 16.549614] system 00:08: ioport range 0x4d6-0x4d6 has been reserved
[ 16.549617] system 00:08: ioport range 0x530-0x537 has been reserved
[ 16.549620] system 00:08: ioport range 0xc00-0xc01 has been reserved
[ 16.549623] system 00:08: ioport range 0xc14-0xc14 has been reserved
[ 16.549626] system 00:08: ioport range 0xc50-0xc52 has been reserved
[ 16.549629] system 00:08: ioport range 0xc6c-0xc6c has been reserved
[ 16.549633] system 00:08: ioport range 0xc6f-0xc6f has been reserved
[ 16.549636] system 00:08: ioport range 0xcd4-0xcd5 has been reserved
[ 16.549639] system 00:08: ioport range 0xcd6-0xcd7 has been reserved
[ 16.549642] system 00:08: ioport range 0xcd8-0xcdf has been reserved
[ 16.549645] system 00:08: ioport range 0x8000-0x805f has been reserved
[ 16.549649] system 00:08: ioport range 0xf40-0xf47 has been reserved
[ 16.549652] system 00:08: ioport range 0x87f-0x87f has been reserved
[ 16.549659] system 00:09: iomem range 0xe0000-0xfffff could not be reserved
[ 16.549663] system 00:09: iomem range 0xfff00000-0xffffffff could not be reserved
[ 16.549666] system 00:09: iomem range 0x0-0xfff could not be reserved
[ 16.580071] PCI: Bridge: 0000:00:01.0
[ 16.580074] IO window: 9000-9fff
[ 16.580077] MEM window: c0100000-c01fffff
[ 16.580080] PREFETCH window: c8000000-cfffffff
[ 16.580084] PCI: Bridge: 0000:00:04.0
[ 16.580086] IO window: a000-afff
[ 16.580089] MEM window: c0200000-c02fffff
[ 16.580092] PREFETCH window: disabled.
[ 16.580095] PCI: Bridge: 0000:00:05.0
[ 16.580096] IO window: disabled.
[ 16.580099] MEM window: c0300000-c03fffff
[ 16.580102] PREFETCH window: disabled.
[ 16.580114] PCI: Bus 9, cardbus bridge: 0000:08:09.0
[ 16.580117] IO window: 00001400-000014ff
[ 16.580123] IO window: 00001800-000018ff
[ 16.580129] PREFETCH window: 88000000-8bffffff
[ 16.580135] MEM window: 8c000000-8fffffff
[ 16.580140] PCI: Bridge: 0000:00:14.4
[ 16.580142] IO window: disabled.
[ 16.580148] MEM window: c0400000-c04fffff
[ 16.580153] PREFETCH window: disabled.
[ 16.580175] PCI: Setting latency timer of device 0000:00:04.0 to 64
[ 16.580183] PCI: Setting latency timer of device 0000:00:05.0 to 64
[ 16.580211] ACPI: PCI Interrupt 0000:08:09.0[A] -> GSI 20 (level, low) -> IRQ 16
[ 16.580230] NET: Registered protocol family 2
[ 16.581522] Time: acpi_pm clocksource has been installed.
[ 16.581526] Clockevents: could not switch to one-shot mode: lapic is not functional.
[ 16.581530] Could not switch to high resolution mode on CPU 0
[ 16.586098] Clockevents: could not switch to one-shot mode: lapic is not functional.
[ 16.586103] Could not switch to high resolution mode on CPU 1
[ 16.617576] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 16.617890] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 16.618645] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 16.619012] TCP: Hash tables configured (established 131072 bind 65536)
[ 16.619015] TCP reno registered
[ 16.629637] checking if image is initramfs... it is
[ 17.398332] Freeing initrd memory: 7687k freed
[ 17.399831] audit: initializing netlink socket (disabled)
[ 17.399846] audit(1211476013.544:1): initialized
[ 17.400040] highmem bounce pool size: 64 pages
[ 17.402207] VFS: Disk quotas dquot_6.5.1
[ 17.402289] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 17.402425] io scheduler noop registered
[ 17.402428] io scheduler anticipatory registered
[ 17.402430] io scheduler deadline registered
[ 17.402441] io scheduler cfq registered (default)
[ 17.402447] PCI: MSI quirk detected. MSI deactivated.
[ 17.402498] Boot video device is 0000:01:05.0
[ 17.402630] PCI: Setting latency timer of device 0000:00:04.0 to 64
[ 17.402653] assign_interrupt_mode Found MSI capability
[ 17.402656] Allocate Port Service[0000:00:04.0:pcie00]
[ 17.402725] PCI: Setting latency timer of device 0000:00:05.0 to 64
[ 17.402747] assign_interrupt_mode Found MSI capability
[ 17.402750] Allocate Port Service[0000:00:05.0:pcie00]
[ 17.403005] isapnp: Scanning for PnP cards...
[ 17.756827] isapnp: No Plug & Play device found
[ 17.788874] Real Time Clock Driver v1.12ac
[ 17.788986] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 17.790307] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 17.790379] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 17.790485] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[ 17.792255] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 17.792261] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 17.801142] mice: PS/2 mouse device common for all mice
[ 17.801278] EISA: Probing bus 0 at eisa.0
[ 17.801287] Cannot allocate resource for EISA slot 1
[ 17.801319] Cannot allocate resource for EISA slot 8
[ 17.801321] EISA: Detected 0 cards.
[ 17.801324] cpuidle: using governor ladder
[ 17.801327] cpuidle: using governor menu
[ 17.801419] NET: Registered protocol family 1
[ 17.801443] Using IPI No-Shortcut mode
[ 17.801478] registered taskstats version 1
[ 17.801586] Magic number: 8:514:138
[ 17.801740] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 17.801742] EDD information not available.
[ 17.801999] Freeing unused kernel memory: 364k freed
[ 17.849036] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 19.096584] fuse init (API version 7.9)
[ 19.123013] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 19.125430] ACPI: Thermal Zone [THRM] (56 C)
[ 19.552296] usbcore: registered new interface driver usbfs
[ 19.552321] usbcore: registered new interface driver hub
[ 19.553524] SCSI subsystem initialized
[ 19.561301] usbcore: registered new device driver usb
[ 19.572410] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 19.572471] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 17
[ 19.572487] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 19.572801] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1
[ 19.572824] ohci_hcd 0000:00:13.0: irq 17, io mem 0xc0004000
[ 19.583578] libata version 3.00 loaded.
[ 19.631706] usb usb1: configuration #1 chosen from 1 choice
[ 19.631735] hub 1-0:1.0: USB hub found
[ 19.631746] hub 1-0:1.0: 4 ports detected
[ 19.739587] ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 17
[ 19.739606] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 19.739638] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2
[ 19.739659] ohci_hcd 0000:00:13.1: irq 17, io mem 0xc0005000
[ 19.799541] usb usb2: configuration #1 chosen from 1 choice
[ 19.799568] hub 2-0:1.0: USB hub found
[ 19.799579] hub 2-0:1.0: 4 ports detected
[ 19.902878] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 18
[ 19.902930] PCI: Setting latency timer of device 0000:00:14.1 to 64
[ 19.903026] scsi0 : pata_atiixp
[ 19.903084] scsi1 : pata_atiixp
[ 19.903684] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x8410 irq 14
[ 19.903687] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x8418 irq 15
[ 20.042591] usb 1-2: new low speed USB device using ohci_hcd and address 2
[ 20.231206] ata1.00: ATA-6: ST9160821A, 3.ALC, max UDMA/100
[ 20.231211] ata1.00: 312581808 sectors, multi 16: LBA48
[ 20.231234] ata1.01: ATAPI: PHILIPS DVD+/-RW SDVD8820, AX03, max UDMA/33
[ 20.247103] ata1.00: configured for UDMA/100
[ 20.256104] usb 1-2: configuration #1 chosen from 1 choice
[ 20.418787] ata1.01: configured for UDMA/33
[ 20.566769] usb 2-2: new full speed USB device using ohci_hcd and address 2
[ 20.574308] scsi 0:0:0:0: Direct-Access ATA ST9160821A 3.AL PQ: 0 ANSI: 5
[ 20.576403] scsi 0:0:1:0: CD-ROM PHILIPS DVD+-RW SDVD8820 AX03 PQ: 0 ANSI: 5
[ 20.575922] ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 17 (level, low) -> IRQ 19
[ 20.575933] PCI: Setting latency timer of device 0000:05:00.0 to 64
[ 20.634155] ssb: Sonics Silicon Backplane found on PCI device 0000:05:00.0
[ 20.634833] ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 17
[ 20.634853] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 20.634891] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3
[ 20.634948] ehci_hcd 0000:00:13.2: irq 17, io mem 0xc0006000
[ 20.758617] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 20.758736] usb usb3: configuration #1 chosen from 1 choice
[ 20.758761] hub 3-0:1.0: USB hub found
[ 20.758768] hub 3-0:1.0: 8 ports detected
[ 20.862945] ACPI: PCI Interrupt 0000:08:09.1[B] -> GSI 21 (level, low) -> IRQ 21
[ 20.912654] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[21] MMIO=[c0405000-c04057ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 20.922383] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 20.922389] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 20.937327] Driver 'sd' needs updating - please use bus_type methods
[ 20.937421] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 20.937434] sd 0:0:0:0: [sda] Write Protect is off
[ 20.937437] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 20.937454] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 20.937499] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 20.937508] sd 0:0:0:0: [sda] Write Protect is off
[ 20.937511] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 20.937525] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 20.937529] sda: sda1 sda2 <<4>Driver 'sr' needs updating - please use bus_type methods
[ 20.978638] sda5 >
[ 20.978747] sd 0:0:0:0: [sda] Attached SCSI disk
[ 20.984744] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 20.984764] sr 0:0:1:0: Attached scsi generic sg1 type 5
[ 21.002941] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 21.002948] Uniform CD-ROM driver Revision: 3.20
[ 21.003007] sr 0:0:1:0: Attached scsi CD-ROM sr0
[ 21.155667] usb 2-2: device not accepting address 2, error -62
[ 21.213765] usbcore: registered new interface driver hiddev
[ 21.346192] usb 1-2: USB disconnect, address 2
[ 21.361788] Attempting manual resume
[ 21.361792] swsusp: Resume From Partition 8:5
[ 21.361794] PM: Checking swsusp image.
[ 21.361992] PM: Resume from disk failed.
[ 21.409304] kjournald starting. Commit interval 5 seconds
[ 21.409929] EXT3-fs: mounted filesystem with ordered data mode.
[ 21.929131] usbcore: registered new interface driver usbhid
[ 21.929138] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 22.189609] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00e0b803670191fa]
[ 22.257429] usb 1-2: new low speed USB device using ohci_hcd and address 3
[ 22.458243] usb 1-2: configuration #1 chosen from 1 choice
[ 22.466323] input: B16_b_02 USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:13.0/usb1/1-2/1-2:1.0/input/input2
[ 22.489294] input,hidraw0: USB HID v1.10 Mouse [B16_b_02 USB-PS/2 Optical Mouse] on usb-0000:00:13.0-2
[ 22.805003] usb 2-2: new full speed USB device using ohci_hcd and address 4
[ 23.019915] usb 2-2: configuration #1 chosen from 1 choice
[ 23.023836] hub 2-2:1.0: USB hub found
[ 23.025807] hub 2-2:1.0: 3 ports detected
[ 23.353540] usb 2-2.1: new full speed USB device using ohci_hcd and address 5
[ 23.467534] usb 2-2.1: configuration #1 chosen from 1 choice
[ 23.475648] input: Lite-On Technology USB Productivity Option Keyboard( has the hub in # 1 ) as /devices/pci0000:00/0000:00:13.1/usb2/2-2/2-2.1/2-2.1:1.0/input/input3
[ 23.484497] input,hidraw1: USB HID v1.10 Keyboard [Lite-On Technology USB Productivity Option Keyboard( has the hub in # 1 )] on usb-0000:00:13.1-2.1
[ 23.491477] input: Lite-On Technology USB Productivity Option Keyboard( has the hub in # 1 ) as /devices/pci0000:00/0000:00:13.1/usb2/2-2/2-2.1/2-2.1:1.1/input/input4
[ 23.512470] input,hidraw2: USB HID v1.10 Device [Lite-On Technology USB Productivity Option Keyboard( has the hub in # 1 )] on usb-0000:00:13.1-2.1
[ 28.998388] Linux agpgart interface v0.102
[ 29.195663] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 29.235349] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 29.284677] input: Power Button (FF) as /devices/virtual/input/input5
[ 29.319146] ACPI: Power Button (FF) [PWRF]
[ 29.319301] input: Lid Switch as /devices/virtual/input/input6
[ 29.331889] ACPI: Lid Switch [LID]
[ 29.331973] input: Sleep Button (CM) as /devices/virtual/input/input7
[ 29.363090] ACPI: Sleep Button (CM) [SLPB]
[ 29.363217] input: Power Button (CM) as /devices/virtual/input/input8
[ 29.395053] ACPI: Power Button (CM) [PWRB]
[ 29.459770] ACPI: Battery Slot [BAT1] (battery present)
[ 29.460862] ACPI: AC Adapter [ACAD] (on-line)
[ 30.075975] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 30.154474] [fglrx] Maximum main memory to use for locked dma buffers: 1776 MBytes.
[ 30.154514] [fglrx] ASYNCIO init succeed!
[ 30.154773] [fglrx] PAT is enabled successfully!
[ 30.155154] [fglrx] module loaded - fglrx 8.47.3 [Feb 25 2008] on minor 0
[ 30.196352] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:18/LNXVIDEO:00/input/input9
[ 30.214335] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 30.222440] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 18
[ 30.222452] PCI: Setting latency timer of device 0000:02:00.0 to 64
[ 30.222483] sky2 0000:02:00.0: v1.20 addr 0xc0200000 irq 18 Yukon-FE (0xb7) rev 1
[ 30.222766] sky2 eth0: addr 00:e0:b8:b9:a3:09
[ 30.358360] piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device
[ 30.698915] b43-phy0: Broadcom 4311 WLAN found
[ 30.798799] phy0: Selected rate control algorithm 'simple'
[ 31.266971] input: PC Speaker as /devices/platform/pcspkr/input/input10
[ 31.374367] Yenta: CardBus bridge found at 0000:08:09.0 [107b:0367]
[ 31.374395] Yenta: Using CSCINT to route CSC interrupts to PCI
[ 31.374398] Yenta: Routing CardBus interrupts to PCI
[ 31.374405] Yenta TI: socket 0000:08:09.0, mfunc 0x01ac1b22, devctl 0x64
[ 31.617942] Yenta: ISA IRQ mask 0x0ef8, PCI irq 16
[ 31.617948] Socket status: 30000006
[ 31.617951] pcmcia: parent PCI bridge Memory window: 0xc0400000 - 0xc04fffff
[ 31.629103] ACPI: PCI Interrupt 0000:08:09.2[A] -> GSI 20 (level, low) -> IRQ 16
[ 31.708577] ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 18
[ 31.849612] Synaptics Touchpad, model: 1, fw: 5.9, id: 0x23aeb3, caps: 0xa04713/0x10008
[ 31.882072] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input11
[ 33.045426] cs: IO port probe 0x100-0x3af: clean.
[ 33.047762] cs: IO port probe 0x3e0-0x4ff: clean.
[ 33.048748] cs: IO port probe 0x820-0x8ff: clean.
[ 33.049550] cs: IO port probe 0xc00-0xcf7: clean.
[ 33.050408] cs: IO port probe 0xa00-0xaff: clean.
[ 33.667751] lp: driver loaded but no devices found
[ 33.775184] Adding 5695000k swap on /dev/sda5. Priority:-1 extents:1 across:5695000k
[ 34.340610] EXT3 FS on sda1, internal journal
[ 34.520354] device-mapper: uevent: version 1.0.3
[ 34.520387] device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com
[ 35.913133] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 36.430499] No dock devices found.
[ 36.860392] powernow-k8: Found 1 AMD Turion(tm) 64 X2 Mobile Technology TL-52 processors (2 cpu cores) (version 2.20.00)
[ 36.859844] powernow-k8: 0 : fid 0x8 (1600 MHz), vid 0x13
[ 36.859849] powernow-k8: 1 : fid 0x0 (800 MHz), vid 0x14
[ 37.764521] apm: BIOS not found.
[ 38.044633] ppdev: user-space parallel port driver
[ 38.155977] audit(1211476035.633:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5190 profile="/usr/sbin/cupsd" namespace="default"
[ 38.457141] Clocksource tsc unstable (delta = -110335356 ns)
[ 39.327722] vboxdrv: Trying to deactivate the NMI watchdog permanently...
[ 39.327728] vboxdrv: Successfully done.
[ 39.327731] vboxdrv: Found 2 processor cores.
[ 39.327754] vboxdrv: fAsync=1 u64DiffCores=924279.
[ 39.327798] vboxdrv: TSC mode is 'asynchronous', kernel timer mode is 'normal'.
[ 39.327801] vboxdrv: Successfully loaded version 1.6.0 (interface 0x00070001).
[ 40.488117] input: b43-phy0 as /devices/virtual/input/input12
[ 40.535622] Bluetooth: Core ver 2.11
[ 40.536154] NET: Registered protocol family 31
[ 40.536157] Bluetooth: HCI device and connection manager initialized
[ 40.536161] Bluetooth: HCI socket layer initialized
[ 40.551599] Bluetooth: L2CAP ver 2.9
[ 40.551604] Bluetooth: L2CAP socket layer initialized
[ 40.569621] Bluetooth: RFCOMM socket layer initialized
[ 40.569633] Bluetooth: RFCOMM TTY layer initialized
[ 40.569635] Bluetooth: RFCOMM ver 1.8
[ 41.691732] Registered led device: b43-phy0:tx
[ 41.691760] Registered led device: b43-phy0:rx
[ 41.691781] Registered led device: b43-phy0:radio
[ 42.358095] ACPI: PCI Interrupt 0000:01:05.0[A] -> GSI 17 (level, low) -> IRQ 19
[ 42.970792] sky2 eth0: enabling interface
[ 43.471837] [fglrx] GART Table is not in FRAME_BUFFER range
[ 43.471848] [fglrx] Reserve Block - 0 offset = 0X0 length = 0X40000
[ 43.471852] [fglrx] Reserve Block - 1 offset = 0X7ff5000 length = 0Xb000
[ 43.638474] [fglrx] interrupt source 20008000 successfully enabled
[ 43.638482] [fglrx] enable ID = 0x00000004
[ 43.638494] [fglrx] Receive enable interrupt message with irqEnableMask: 20008000
[ 44.461456] sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both
[ 45.577868] NET: Registered protocol family 17
[ 46.577109] NET: Registered protocol family 10
[ 46.577373] lo: Disabled Privacy Extensions
[ 46.578425] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 48.454666] hda-intel: Invalid position buffer, using LPIB read method instead.
[ 51.811884] eth0: no IPv6 routers present
[ 70.710744] CPU0 attaching NULL sched-domain.
[ 70.710752] CPU1 attaching NULL sched-domain.
[ 70.719380] CPU0 attaching sched-domain:
[ 70.719384] domain 0: span 03
[ 70.719387] groups: 01 02
[ 70.719391] CPU1 attaching sched-domain:
[ 70.719393] domain 0: span 03
[ 70.719394] groups: 02 01
[ 218.095423] process `skype' is using obsolete setsockopt SO_BSDCOMPAT