rendered paste bodyLinux version 2.6.26-rc1 (rharper@lewis) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #2 SMP Thu May 15 13:08:49 PDT 2008
Command line: root=UUID=d76dcd13-8cf2-4441-8b77-90cf3f58c989 ro console=tty0 console=ttyS0,115200 apic=debug
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000007ff0000 (usable)
BIOS-e820: 0000000007ff0000 - 0000000008000000 (ACPI data)
BIOS-e820: 00000000fffbd000 - 0000000100000000 (reserved)
max_pfn_mapped = 1048576
x86: PAT support disabled.
init_memory_mapping
DMI 2.4 present.
kvm-clock: cpu 0, msr 0:84d581, boot clock
ACPI: RSDP 000FB450, 0014 (r0 QEMU )
ACPI: RSDT 07FF0000, 002C (r1 QEMU QEMURSDT 1 QEMU 1)
ACPI: FACP 07FF002C, 0074 (r1 QEMU QEMUFACP 1 QEMU 1)
ACPI: DSDT 07FF0100, 2464 (r1 BXPC BXDSDT 1 INTL 20061109)
ACPI: FACS 07FF00C0, 0040
ACPI: APIC 07FF2568, 00E0 (r1 QEMU QEMUAPIC 1 QEMU 1)
No NUMA configuration found
Faking a node at 0000000000000000-0000000007ff0000
Bootmem setup node 0 0000000000000000-0000000007ff0000
NODE_DATA [000000000000b000 - 000000000000ffff]
bootmap [0000000000010000 - 0000000000010fff] pages 1
early res: 0 [0-fff] BIOS data page
early res: 1 [6000-7fff] TRAMPOLINE
early res: 2 [200000-902547] TEXT DATA BSS
early res: 3 [7d51000-7fdf62d] RAMDISK
early res: 4 [9fc00-fffff] BIOS reserved
early res: 5 [8000-afff] PGTABLE
Zone PFN ranges:
DMA 0 -> 4096
DMA32 4096 -> 1048576
Normal 1048576 -> 1048576
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0 -> 159
0: 256 -> 32752
ACPI: PM-Timer IO Port: 0xb008
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x08] disabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x09] disabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x0a] disabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0b] disabled)
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x0c] disabled)
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x0d] disabled)
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x0e] disabled)
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x0f] disabled)
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 0, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
Setting APIC routing to flat
Using ACPI (MADT) for SMP configuration information
mapped APIC to ffffffffff5fb000 ( fee00000)
mapped IOAPIC to ffffffffff5fa000 (00000000fec00000)
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e8000
PM: Registered nosave memory: 00000000000e8000 - 0000000000100000
Allocating PCI resources starting at 10000000 (gap: 8000000:f7fbd000)
SMP: Allowing 16 CPUs, 15 hotplug CPUs
PERCPU: Allocating 36864 bytes of per cpu data
kvm-clock: cpu 0, msr 0:100b581, primary cpu clock
Built 1 zonelists in Node order, mobility grouping on. Total pages: 30312
Policy zone: DMA32
Kernel command line: root=UUID=d76dcd13-8cf2-4441-8b77-90cf3f58c989 ro console=tty0 console=ttyS0,115200 apic=debug
Initializing CPU#0
PID hash table entries: 512 (order: 9, 4096 bytes)
TSC calibrated against PM_TIMER
time.c: Detected 1995.006 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
console [ttyS0] enabled
Checking aperture...
Memory: 117824k/131008k available (3610k kernel code, 12796k reserved, 2094k data, 480k init)
calibrate_delay_direct() failed to get a good estimate for loops_per_jiffy.
Probably due to long platform interrupts. Consider using "lpj=" boot option.
Dentry cache hash table entries: 16384 (order: 5, 131072 bytes)
Inode-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 0/0 -> Node 0
ACPI: Core revision 20080321
Getting VERSION: 50014
Getting VERSION: 50014
Getting ID: 0
Getting ID: ff000000
Getting LVT0: 700
Getting LVT1: 10000
enabled ExtINT on CPU#0
ENABLING IO-APIC IRQs
..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
CPU0: QEMU Virtual CPU version 0.9.1 stepping 03
Using local APIC timer interrupts.
Detected 12.468 MHz APIC timer.
Brought up 1 CPUs
Total of 1 processors activated (1046.52 BogoMIPS).
net_namespace: 568 bytes
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
No dock devices found.
ACPI: bus type pci registered
PCI: Using configuration type 1 for base access
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:01.3: quirk: region b000-b03f claimed by PIIX4 ACPI
pci 0000:00:01.3: quirk: region b100-b10f claimed by PIIX4 SMB
ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 7 devices
ACPI: ACPI bus type pnp unregistered
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
testing the IO APIC.......................
.................................... done.
PCI-GART: No AMD northbridge found.
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 1, 8192 bytes)
TCP established hash table entries: 4096 (order: 4, 65536 bytes)
TCP bind hash table entries: 4096 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP reno registered
NET: Registered protocol family 1
checking if image is initramfs... it is
Freeing initrd memory: 2617k freed
Total HugeTLB memory allocated, 0
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
msgmni has been set to 235 for ipc namespace ffffffff80731be0
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:00:00.0: Limiting direct PCI/PCI transfers
pci 0000:00:01.0: PIIX3: Enabling Passive Release
pci 0000:00:01.0: Activating ISA DMA hang workarounds
input: Power Button (FF) as /class/input/input0
ACPI: Power Button (FF) [PWRF]
ACPI: ACPI0007:00 is registered as cooling_device0
Real Time Clock Driver v1.12ac
Linux agpgart interface v0.103
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16450
00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16450
FDC 0 is a S82078B
brd: module loaded
loop: module loaded
Intel(R) PRO/1000 Network Driver - version 7.3.20-k2
Copyright (c) 1999-2006 Intel Corporation.
e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:03.0[A] -> Link [LNKC] -> GSI 11 (level, high) -> IRQ 11
eth0: RTL-8139C+ at 0xffffc20000066000, 52:54:00:12:34:56, IRQ 11
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
console [netcon0] enabled
netconsole: network logging started
Uniform Multi-Platform E-IDE driver
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX3: IDE controller (0x8086:0x7010 rev 0x00) at PCI slot 0000:00:01.1
PIIX3: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xc000-0xc007
ide1: BM-DMA at 0xc008-0xc00f
hda: QEMU HARDDISK, ATA DISK drive
hda: MWDMA2 mode selected
hdc: QEMU DVD-ROM, ATAPI CD/DVD-ROM drive
hdc: MWDMA2 mode selected
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
isa bounce pool size: 16 pages
ide1 at 0x170-0x177,0x376 on irq 15
ide_generic: I/O resource 0x1F0-0x1F7 not free.
ide_generic: I/O resource 0x170-0x177 not free.
hda: max request size: 512KiB
hda: 20971520 sectors (10737 MB) w/256KiB Cache, CHS=16383/255/63
hda: cache flushes supported
hda: hda1 hda2 < hda5 >
hdc: ATAPI 4X CD-ROM drive, 512kB Cache
Uniform CD-ROM driver Revision: 3.20
Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
Fusion MPT base driver 3.04.06
Copyright (c) 1999-2007 LSI Corporation
Fusion MPT SPI Host driver 3.04.06
ieee1394: raw1394: /dev/raw1394 device initialized
USB Universal Host Controller Interface driver v3.0
usbcore: registered new interface driver usblp
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input1
device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
oprofile: using NMI interrupt.
TCP cubic registered
NET: Registered protocol family 10
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
powernow-k8: Processor cpuid 623 not supported
Freeing unused kernel memory: 480k freed
Loading, please wait...
input: ImExPS/2 Generic Explorer Mouse as /class/input/input2
Begin: Loading essential drivers... ...
Done.
Begin: Running /scripts/init-premount ...
Done.
Begin: Mounting root file system... ...
Begin: Running /scripts/local-top ...
Done.
Begin: Waiting for root file system... ...
Done.
Begin: Running /scripts/local-premount ...
kinit: name_to_dev_t(/dev/disk/by-uuid/a9c628e2-ef93-45e1-a52e-0e91679f1955) = hda5PM: Starting manual resume from disk
(3,5)
kinit: trying to resume from /dev/disk/by-uuid/a9c628e2-ef93-45e1-a52e-0e91679f1955
kinit: No resume image, doing normal boot...
Done.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Begin: Running /scripts/local-bottom ...
Done.
Done.
Begin: Running /scripts/init-bottom ...
Done.
* Setting preliminary keymap... [80G
[74G[ OK ]
* Setting the system clock
* Starting basic networking... [80G
[74G[ OK ]
* Starting kernel event manager... [80G
[74G[ OK ]
* Loading hardware drivers... [80G eth0: link up, 100Mbps, full-duplex, lpa 0x05E1
warning: `dhclient3' uses 32-bit capabilities (legacy support in use)
[74G[ OK ]
* Setting the system clock
* Loading kernel modules... [80G * Loading manual drivers... [80G
[74G[ OK ]
* Activating swap... [80G
[74G[ OK ]
* Checking root file system... [80G fsck 1.40.2 (12-Jul-2007)
/dev/hda1: Superblock last write time is in the future. FIXED.
/dev/hda1: clean, 71275/1249248 files, 508354/2498099 blocks
[74G[ OK ]
* Checking file systems... [80G fsck 1.40.2 (12-Jul-2007)
[74G[ OK ]
BUG: unable to handle kernel NULL pointer dereference<1>BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
IP: [<ffffffff80369dad>] rb_erase+0x12b/0x2aa
PGD 70a6067 PUD 6442067 PMD 0
Oops: 0000 [1] SMP
CPU 0
Modules linked in:
Pid: 0, comm: swapper Not tainted 2.6.26-rc1 #2
RIP: 0010:[<ffffffff80369dad>] [<ffffffff80369dad>] rb_erase+0x12b/0x2aa
RSP: 0018:ffffffff807cbdc0 EFLAGS: 00010046
RAX: ffff810006822431 RBX: ffff810006822430 RCX: 0000000000000000
RDX: ffff810006822430 RSI: ffff810001008308 RDI: 0000000000000000
RBP: ffff810001008308 R08: 0000000000000000 R09: 0000000000002b84
R10: 7fffffffffffffff R11: ffff810001006a00 R12: 0000000000000000
R13: 0000000000000002 R14: 0000000000000001 R15: 00000008a69b440b
FS: 00007fe81630e6e0(0000) GS:ffffffff80793000(0000) knlGS:0000000000000000
CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b
CR2: 0000000000000000 CR3: 000000000704d000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process swapper (pid: 0, threadinfo ffffffff807ca000, task ffffffff8071a4a0)
Stack: f<4> at 00000000000000b6
IP: [<ffffffff8051d335>] inet_sock_destruct+0x4/0x1a7
PGD 5c19067 PUD 5c3c067 PMD 0
Oops: 0000 [1] SMP
CPU 0
Modules linked in:
Pid: 0, comm: swapper Tainted: G D 2.6.26-rc1 #2
RIP: 0010:[<ffffffff8051d335>] [<ffffffff8051d335>] inet_sock_destruct+0x4/0x1a7
RSP: 0018:ffffffff80853f18 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 000000000000000e RCX: ffffffff807cbf38
RDX: 000000000000000e RSI: 000000000000ffff RDI: 000000000000000e
RBP: 0000000000000000 R08: ffff8100010083a0 R09: ffff8100010083a0
R10: 00000000ffffffff R11: ffff810001006a00 R12: 0000000000000000
R13: 000000000000000e R14: ffffffff80801320 R15: 0000000000000000
FS: 00007f0754d4e6e0(0000) GS:ffffffff80793000(0000) knlGS:0000000000000000
CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b
CR2: 00000000000000b6 CR3: 000000000717d000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process swapper (pid: 0, threadinfo ffffffff807ca000, task ffffffff8071a4a0)
Stack: ffff810006d39e40 ffffffff80269d77 ffff8100010083a0 ffffffff80794b80
000000000000000e ffff810006d39e40 ffffffff80794bd0 ffffffff8026b326
ffffffff807cbe88 ffffffff807cbe88 000000000000000e 000000000000003e
Call Trace:
<IRQ> [<ffffffff80269d77>] handle_IRQ_event+0x2c/0x61
[<ffffffff8026b326>] handle_edge_irq+0xe0/0x120
[<ffffffff8021fb8d>] do_IRQ+0xf2/0x165
[<ffffffff8021bfc6>] default_idle+0x0/0x46
[<ffffffff8021d32d>] ret_from_intr+0x0/0x19
<EOI> [<ffffffff80582f31>] notifier_call_chain+0x29/0x4c
[<ffffffff8021bfc6>] default_idle+0x0/0x46
[<ffffffff8021bff0>] default_idle+0x2a/0x46
[<ffffffff8021bba3>] cpu_idle+0x90/0xba
Code: e2 32 06 00 41 c7 04 24 03 00 00 00 48 89 ef c7 44 24 0c 00 00 00 00 e8 d9 eb fb ff 8b 44 24 0c 59 5e 5b 5d 41 5c c3 53 48 89 fb <48> 8b bb a8 00 00 00 48 8d 83 a8 00 00 00 48 39 c7 74 2c 48 85
RIP [<ffffffff8051d335>] inet_sock_destruct+0x4/0x1a7
RSP <ffffffff80853f18>
CR2: 00000000000000b6