rendered paste bodyasterisk*CLI> pri debug span 1
Enabled debugging on span 1
< Protocol Discriminator: Q.931 (8) len=69
< Call Ref: len= 2 (reference 2681/0xA79) (Originator)
< Message type: SETUP (5)
< [04 03 80 90 a2]
< Bearer Capability (len= 5) [ Ext: 1 Q.931 Std: 0 Info transfer capability: Speech (0)
< Ext: 1 Trans mode/rate: 64kbps, circuit-mode (16)
< Ext: 1 User information layer 1: u-Law (34)
< [18 03 a9 83 90]
< Channel ID (len= 5) [ Ext: 1 IntID: Implicit, PRI Spare: 0, Exclusive Dchan: 0
< ChanSel: Reserved
< Ext: 1 Coding: 0 Number Specified Channel Type: 3
< Ext: 1 Channel: 16 ]
< [1c 15 9f 8b 01 00 a1 0f 02 01 4d 06 07 2a 86 48 ce 15 00 04 0a 01 00]
< Facility (len=23, codeset=0) [ 0x9f, 0x8b, 0x01, 0x00, 0xa1, 0x0f, 0x02, 0x01, 'M', 0x06, 0x07, 0x2a, 0x86, 'H', 0xce, 0x15, 0x00, 0x04, 0x0a, 0x01, 0x00 ]
< [1e 02 85 83]
< Progress Indicator (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0 Location: Private network serving the remote user (5)
< Ext: 1 Progress Description: Calling equipment is non-ISDN. (3) ]
< [6c 0c 21 80 34 34 30 35 38 32 35 36 38 34]
< Calling Number (len=14) [ Ext: 0 TON: National Number (2) NPI: ISDN/Telephony Numbering Plan (E.164/E.163) (1)
< Presentation: Presentation permitted, user number not screened (0) '4405825684' ]
< [70 0b a1 32 31 36 39 32 30 33 31 30 35]
< Called Number (len=13) [ Ext: 1 TON: National Number (2) NPI: ISDN/Telephony Numbering Plan (E.164/E.163) (1) '2169203105' ]
-- Making new call for cr 2681
-- Processing Q.931 Call Setup
-- Processing IE 4 (cs0, Bearer Capability)
-- Processing IE 24 (cs0, Channel Identification)
-- Processing IE 28 (cs0, Facility)
Handle Q.932 ROSE Invoke component
-- Processing IE 30 (cs0, Progress Indicator)
-- Processing IE 108 (cs0, Calling Party Number)
-- Processing IE 112 (cs0, Called Party Number)
> Protocol Discriminator: Q.931 (8) len=10
> Call Ref: len= 2 (reference 2681/0xA79) (Terminator)
> Message type: CALL PROCEEDING (2)
> [18 03 a9 83 90]
> Channel ID (len= 5) [ Ext: 1 IntID: Implicit, PRI Spare: 0, Exclusive Dchan: 0
> ChanSel: Reserved
> Ext: 1 Coding: 0 Number Specified Channel Type: 3
> Ext: 1 Channel: 16 ]
-- Executing Wait("Zap/16-1", "0.5") in new stack
-- Accepting call from '4405825684' to '2169203105' on channel 0/16, span 1
< Protocol Discriminator: Q.931 (8) len=36
< Call Ref: len= 2 (reference 2681/0xA79) (Originator)
< Message type: FACILITY (98)
< [1c 1d 9f 8b 01 00 a1 17 02 01 4e 02 01 00 80 0f 55 4e 4b 4e 4f 57 4e 20 20 20 20 20 20 20 20]
< Facility (len=31, codeset=0) [ 0x9f, 0x8b, 0x01, 0x00, 0xa1, 0x17, 0x02, 0x01, 'N', 0x02, 0x01, 0x00, 0x80, 0x0f, 'UNKNOWN', 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20 ]
-- Processing IE 28 (cs0, Facility)
Handle Q.932 ROSE Invoke component
-- Executing Goto("Zap/16-1", "inbound|2169203105|1") in new stack
-- Goto (inbound,2169203105,1)
-- Executing Dial("Zap/16-1", "Zap/g1/2169203120") in new stack
-- Making new call for cr 32771
-- Requested transfer capability: 0x00 - SPEECH
> Protocol Discriminator: Q.931 (8) len=64
> Call Ref: len= 2 (reference 3/0x3) (Originator)
> Message type: SETUP (5)
> [04 03 80 90 a2]
> Bearer Capability (len= 5) [ Ext: 1 Q.931 Std: 0 Info transfer capability: Speech (0)
> Ext: 1 Trans mode/rate: 64kbps, circuit-mode (16)
> Ext: 1 User information layer 1: u-Law (34)
> [18 03 a9 83 81]
> Channel ID (len= 5) [ Ext: 1 IntID: Implicit, PRI Spare: 0, Exclusive Dchan: 0
> ChanSel: Reserved
> Ext: 1 Coding: 0 Number Specified Channel Type: 3
> Ext: 1 Channel: 1 ]
> [1e 02 80 83]
> Progress Indicator (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0 Location: User (0)
> Ext: 1 Progress Description: Calling equipment is non-ISDN. (3) ]
> [28 10 b1 55 4e 4b 4e 4f 57 4e 20 20 20 20 20 20 20 20]
> Display (len=16) Charset: 31 [ UNKNOWN ]
> [6c 0c 21 80 34 34 30 35 38 32 35 36 38 34]
> Calling Number (len=14) [ Ext: 0 TON: National Number (2) NPI: ISDN/Telephony Numbering Plan (E.164/E.163) (1)
> Presentation: Presentation permitted, user number not screened (0) '4405825684' ]
> [70 0b a1 32 31 36 39 32 30 33 31 32 30]
> Called Number (len=13) [ Ext: 1 TON: National Number (2) NPI: ISDN/Telephony Numbering Plan (E.164/E.163) (1) '2169203120' ]
-- Called g1/2169203120
< Protocol Discriminator: Q.931 (8) len=10
< Call Ref: len= 2 (reference 3/0x3) (Terminator)
< Message type: CALL PROCEEDING (2)
< [18 03 a9 83 81]
< Channel ID (len= 5) [ Ext: 1 IntID: Implicit, PRI Spare: 0, Exclusive Dchan: 0
< ChanSel: Reserved
< Ext: 1 Coding: 0 Number Specified Channel Type: 3
< Ext: 1 Channel: 1 ]
-- Processing IE 24 (cs0, Channel Identification)
-- Zap/1-1 is proceeding passing it to Zap/16-1
> Protocol Discriminator: Q.931 (8) len=14
> Call Ref: len= 2 (reference 2681/0xA79) (Terminator)
> Message type: CALL PROCEEDING (2)
> [18 03 a9 83 90]
> Channel ID (len= 5) [ Ext: 1 IntID: Implicit, PRI Spare: 0, Exclusive Dchan: 0
> ChanSel: Reserved
> Ext: 1 Coding: 0 Number Specified Channel Type: 3
> Ext: 1 Channel: 16 ]
> [1e 02 81 88]
> Progress Indicator (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0 Location: Private network serving the local user (1)
> Ext: 1 Progress Description: Inband information or appropriate pattern now available. (8) ]
< Protocol Discriminator: Q.931 (8) len=13
< Call Ref: len= 2 (reference 2681/0xA79) (Originator)
< Message type: STATUS (125)
< [08 03 80 e5 02]
< Cause (len= 5) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0 Location: User (0)
< Ext: 1 Cause: Message not compatible with call state (101), class = Protocol Error (6) ]
< Cause data 1: 02 (2, CALL PROCEEDING message)
< [14 01 09]
< Call State (len= 3) [ Ext: 0 Coding: CCITT (ITU) standard (0) Call state: Incoming Call Proceeding (9)
-- Processing IE 8 (cs0, Cause)
-- Processing IE 20 (cs0, Call State)
< Protocol Discriminator: Q.931 (8) len=69
< Call Ref: len= 2 (reference 5265/0x1491) (Originator)
< Message type: SETUP (5)
< [04 03 80 90 a2]
< Bearer Capability (len= 5) [ Ext: 1 Q.931 Std: 0 Info transfer capability: Speech (0)
< Ext: 1 Trans mode/rate: 64kbps, circuit-mode (16)
< Ext: 1 User information layer 1: u-Law (34)
< [18 03 a9 83 91]
< Channel ID (len= 5) [ Ext: 1 IntID: Implicit, PRI Spare: 0, Exclusive Dchan: 0
< ChanSel: Reserved
< Ext: 1 Coding: 0 Number Specified Channel Type: 3
< Ext: 1 Channel: 17 ]
< [1c 15 9f 8b 01 00 a1 0f 02 01 4f 06 07 2a 86 48 ce 15 00 04 0a 01 00]
< Facility (len=23, codeset=0) [ 0x9f, 0x8b, 0x01, 0x00, 0xa1, 0x0f, 0x02, 0x01, 'O', 0x06, 0x07, 0x2a, 0x86, 'H', 0xce, 0x15, 0x00, 0x04, 0x0a, 0x01, 0x00 ]
< [1e 02 85 83]
< Progress Indicator (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0 Location: Private network serving the remote user (5)
< Ext: 1 Progress Description: Calling equipment is non-ISDN. (3) ]
< [6c 0c 21 80 34 34 30 35 38 32 35 36 38 34]
< Calling Number (len=14) [ Ext: 0 TON: National Number (2) NPI: ISDN/Telephony Numbering Plan (E.164/E.163) (1)
< Presentation: Presentation permitted, user number not screened (0) '4405825684' ]
< [70 0b a1 32 31 36 39 32 30 33 31 32 30]
< Called Number (len=13) [ Ext: 1 TON: National Number (2) NPI: ISDN/Telephony Numbering Plan (E.164/E.163) (1) '2169203120' ]
-- Making new call for cr 5265
-- Processing Q.931 Call Setup
-- Processing IE 4 (cs0, Bearer Capability)
-- Processing IE 24 (cs0, Channel Identification)
-- Processing IE 28 (cs0, Facility)
Handle Q.932 ROSE Invoke component
-- Processing IE 30 (cs0, Progress Indicator)
-- Processing IE 108 (cs0, Calling Party Number)
-- Processing IE 112 (cs0, Called Party Number)
> Protocol Discriminator: Q.931 (8) len=10
> Call Ref: len= 2 (reference 5265/0x1491) (Terminator)
> Message type: CALL PROCEEDING (2)
> [18 03 a9 83 91]
> Channel ID (len= 5) [ Ext: 1 IntID: Implicit, PRI Spare: 0, Exclusive Dchan: 0
> ChanSel: Reserved
> Ext: 1 Coding: 0 Number Specified Channel Type: 3
> Ext: 1 Channel: 17 ]
-- Executing Wait("Zap/17-1", "0.5") in new stack
-- Accepting call from '4405825684' to '2169203120' on channel 0/17, span 1
< Protocol Discriminator: Q.931 (8) len=36
< Call Ref: len= 2 (reference 5265/0x1491) (Originator)
< Message type: FACILITY (98)
< [1c 1d 9f 8b 01 00 a1 17 02 01 50 02 01 00 80 0f 55 4e 4b 4e 4f 57 4e 20 20 20 20 20 20 20 20]
< Facility (len=31, codeset=0) [ 0x9f, 0x8b, 0x01, 0x00, 0xa1, 0x17, 0x02, 0x01, 'P', 0x02, 0x01, 0x00, 0x80, 0x0f, 'UNKNOWN', 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20 ]
-- Processing IE 28 (cs0, Facility)
Handle Q.932 ROSE Invoke component
-- Executing Goto("Zap/17-1", "inbound|2169203120|1") in new stack
-- Goto (inbound,2169203120,1)
-- Executing Answer("Zap/17-1", "") in new stack
> Protocol Discriminator: Q.931 (8) len=14
> Call Ref: len= 2 (reference 5265/0x1491) (Terminator)
> Message type: CONNECT (7)
> [18 03 a9 83 91]
> Channel ID (len= 5) [ Ext: 1 IntID: Implicit, PRI Spare: 0, Exclusive Dchan: 0
> ChanSel: Reserved
> Ext: 1 Coding: 0 Number Specified Channel Type: 3
> Ext: 1 Channel: 17 ]
> [1e 02 81 82]
> Progress Indicator (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0 Location: Private network serving the local user (1)
> Ext: 1 Progress Description: Called equipment is non-ISDN. (2) ]
-- Executing Milliwatt("Zap/17-1", "") in new stack
< Protocol Discriminator: Q.931 (8) len=5
< Call Ref: len= 2 (reference 5265/0x1491) (Originator)
< Message type: CONNECT ACKNOWLEDGE (15)
< Protocol Discriminator: Q.931 (8) len=5
< Call Ref: len= 2 (reference 3/0x3) (Terminator)
< Message type: CONNECT (7)
> Protocol Discriminator: Q.931 (8) len=5
> Call Ref: len= 2 (reference 3/0x3) (Originator)
> Message type: CONNECT ACKNOWLEDGE (15)
-- Zap/1-1 answered Zap/16-1
> Protocol Discriminator: Q.931 (8) len=14
> Call Ref: len= 2 (reference 2681/0xA79) (Terminator)
> Message type: CONNECT (7)
> [18 03 a9 83 90]
> Channel ID (len= 5) [ Ext: 1 IntID: Implicit, PRI Spare: 0, Exclusive Dchan: 0
> ChanSel: Reserved
> Ext: 1 Coding: 0 Number Specified Channel Type: 3
> Ext: 1 Channel: 16 ]
> [1e 02 81 82]
> Progress Indicator (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0 Location: Private network serving the local user (1)
> Ext: 1 Progress Description: Called equipment is non-ISDN. (2) ]
-- Attempting native bridge of Zap/16-1 and Zap/1-1
< Protocol Discriminator: Q.931 (8) len=5
< Call Ref: len= 2 (reference 2681/0xA79) (Originator)
< Message type: CONNECT ACKNOWLEDGE (15)