Bootbase Version: V1.13 | 02/16/2006 14:05:00
RAM: Size = 32768 Kbytes
DRAM POST: Testing: 32768K
OK
FLASH: AMD 32M *1
ZyNOS Version: V3.40(AJQ.3) | 09/26/2007 18:00:00
Press any key to enter debug mode within 3 seconds.
......
Enter Debug Mode
ATEN1,887852B1
OK
ATUP9402C000,400000
Starting XMODEM upload (CRC mode)....
CC
Total 99584 bytes received
OK
ATGO9402C000
U-Boot 1.3.3-rc2-00042-g11c0fa8-dirty (May 2 2008 - 18:53:07)
SOC: TI AR7 (TNETD7200) id:0x002b, rev:0x11
DRAM: 32 MB
Flash: 4 MB
Using default environment
In: serial
Out: serial
Err: serial
Net: cpmac
Hit any key to stop autoboot: 0
O2SURF # help
? - alias for 'help'
base - print or set address offset
bootm - boot application image from memory
bootp - boot image via network using BootP/TFTP protocol
cp - memory copy
erase - erase FLASH memory
flinfo - print FLASH memory information
go - start application at address 'addr'
help - print online help
md - memory display
mw - memory write (fill)
printenv- print environment variables
protect - enable or disable FLASH write protection
rarpboot- boot image via network using RARP/TFTP protocol
reset - Perform RESET of the CPU
setenv - set environment variables
tftpboot- boot image via network using TFTP protocol
version - print monitor version
U-Boot#