rendered paste body[ 0.000000] Linux version 2.6.24-16-generic (buildd@palmer) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Thu Apr 10 13:23:42 UTC 2008 (Ubuntu 2.6.24-16.30-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001fe90000 (usable)
[ 0.000000] BIOS-e820: 000000001fe90000 - 000000001fe9a000 (ACPI data)
[ 0.000000] BIOS-e820: 000000001fe9a000 - 000000001ff00000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000001ff00000 - 0000000020000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0006000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0008000 - 00000000f000c000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 510MB LOWMEM available.
[ 0.000000] Entering add_active_range(0, 0, 130704) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 130704
[ 0.000000] HighMem 130704 -> 130704
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 130704
[ 0.000000] On node 0 totalpages: 130704
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 989 pages used for memmap
[ 0.000000] Normal zone: 125619 pages, LIFO batch:31
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP signature @ 0xC00F65C0 checksum 0
[ 0.000000] ACPI: RSDP 000F65C0, 0014 (r0 PTLTD )
[ 0.000000] ACPI: RSDT 1FE90F47, 0048 (r1 PTLTD HunterTL 6040000 LTP 0)
[ 0.000000] ACPI: FACP 1FE99E88, 0074 (r1 LGE HunterTL 6040000 LGE 5F)
[ 0.000000] ACPI: DSDT 1FE919DB, 84AD (r1 LGE HUNTER 6040000 INTL 20030224)
[ 0.000000] ACPI: FACS 1FEAAFC0, 0040
[ 0.000000] ACPI: APIC 1FE99EFC, 0068 (r1 INTEL ALVISO 6040000 LOHR 5F)
[ 0.000000] ACPI: HPET 1FE99F64, 0038 (r1 INTEL ALVISO 6040000 LOHR 5F)
[ 0.000000] ACPI: MCFG 1FE99F9C, 003C (r1 INTEL ALVISO 6040000 LOHR 5F)
[ 0.000000] ACPI: BOOT 1FE99FD8, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1)
[ 0.000000] ACPI: SSDT 1FE917AD, 022E (r1 SataRe SataAhci 1000 INTL 20030224)
[ 0.000000] ACPI: SSDT 1FE91368, 0235 (r1 PmRef Cpu0Ist 3000 INTL 20030224)
[ 0.000000] ACPI: SSDT 1FE911A8, 01C0 (r1 PmRef Cpu0Cst 3001 INTL 20030224)
[ 0.000000] ACPI: SSDT 1FE90F8F, 0219 (r1 PmRef CpuPm 3000 INTL 20030224)
[ 0.000000] ACPI: DMI detected: LG
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:13 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:c0000000)
[ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000dc000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000dc000 - 0000000000100000
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129683
[ 0.000000] Kernel command line: root=UUID=471e6075-9a7a-48fe-b02f-1ed032267542 ro quiet splash acpi=strict
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 0.000000] Detected 1729.018 MHz processor.
[ 18.923668] Console: colour VGA+ 80x25
[ 18.923672] console [tty0] enabled
[ 18.923833] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 18.924027] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 18.934706] Memory: 505636k/522816k available (2157k kernel code, 16572k reserved, 998k data, 364k init, 0k highmem)
[ 18.934714] virtual kernel memory layout:
[ 18.934715] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB)
[ 18.934717] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 18.934718] vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB)
[ 18.934719] lowmem : 0xc0000000 - 0xdfe90000 ( 510 MB)
[ 18.934720] .init : 0xc041b000 - 0xc0476000 ( 364 kB)
[ 18.934722] .data : 0xc031b5a4 - 0xc0414dc4 ( 998 kB)
[ 18.934723] .text : 0xc0100000 - 0xc031b5a4 (2157 kB)
[ 18.934726] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 18.934760] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[ 18.934904] hpet clockevent registered
[ 19.014875] Calibrating delay using timer specific routine.. 3461.54 BogoMIPS (lpj=6923087)
[ 19.014896] Security Framework initialized
[ 19.014903] SELinux: Disabled at boot.
[ 19.014917] AppArmor: AppArmor initialized
[ 19.014921] Failure registering capabilities with primary security module.
[ 19.014929] Mount-cache hash table entries: 512
[ 19.015050] CPU: After generic identify, caps: afe9fbff 00100000 00000000 00000000 00000180 00000000 00000000 00000000
[ 19.015063] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 19.015066] CPU: L2 cache: 2048K
[ 19.015068] CPU: After all inits, caps: afe9fbff 00100000 00000000 00002040 00000180 00000000 00000000 00000000
[ 19.015077] Compat vDSO mapped to ffffe000.
[ 19.015088] Checking 'hlt' instruction... OK.
[ 19.031224] SMP alternatives: switching to UP code
[ 19.033010] Freeing SMP alternatives: 11k freed
[ 19.033111] Early unpacking initramfs... done
[ 19.411254] ACPI: Core revision 20070126
[ 19.411332] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 19.416915] CPU0: Intel(R) Pentium(R) M processor 1.73GHz stepping 08
[ 19.416938] Total of 1 processors activated (3461.54 BogoMIPS).
[ 19.417129] ENABLING IO-APIC IRQs
[ 19.417315] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 19.562682] Brought up 1 CPUs
[ 19.562708] CPU0 attaching sched-domain:
[ 19.562711] domain 0: span 01
[ 19.562713] groups: 01
[ 19.562862] net_namespace: 64 bytes
[ 19.562871] Booting paravirtualized kernel on bare hardware
[ 19.563336] Time: 11:19:35 Date: 05/07/08
[ 19.563359] NET: Registered protocol family 16
[ 19.563544] EISA bus registered
[ 19.563550] ACPI: bus type pci registered
[ 19.564015] PCI: PCI BIOS revision 2.10 entry at 0xfd90e, last bus=6
[ 19.564017] PCI: Using configuration type 1
[ 19.564019] Setting up standard PCI resources
[ 19.572734] ACPI: EC: Look up EC in DSDT
[ 19.575016] ACPI: Interpreter enabled
[ 19.575019] ACPI: (supports S0 S3 S4 S5)
[ 19.575032] ACPI: Using IOAPIC for interrupt routing
[ 19.581982] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[ 19.581985] ACPI: EC: driver started in poll mode
[ 19.582023] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 19.582671] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[ 19.582676] PCI quirk: region 1180-11bf claimed by ICH6 GPIO
[ 19.583614] PCI: Transparent bridge - 0000:00:1e.0
[ 19.583698] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 19.583953] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
[ 19.584082] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 19.584207] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[ 19.584342] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 19.587103] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 6 7 *10 14 15)
[ 19.587247] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 6 7 11 14 15) *10
[ 19.587389] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 6 *7 10 14 15)
[ 19.587530] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 6 7 *11 14 15)
[ 19.587616] ACPI: PCI Interrupt Link [LNKE] (IRQs 5 6 7 10 14 15) *0, disabled.
[ 19.587703] ACPI: PCI Interrupt Link [LNKF] (IRQs 5 6 7 11 14 15) *0, disabled.
[ 19.587789] ACPI: PCI Interrupt Link [LNKG] (IRQs 5 6 7 10 14 15) *0, disabled.
[ 19.587930] ACPI: PCI Interrupt Link [LNKH] (IRQs *5 6 7 11 14 15)
[ 19.588439] ACPI: Power Resource [CTHT] (off)
[ 19.589467] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 19.589757] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 19.589786] pnp: PnP ACPI init
[ 19.589792] ACPI: bus type pnp registered
[ 19.599385] pnp: PnP ACPI: found 10 devices
[ 19.599388] ACPI: ACPI bus type pnp unregistered
[ 19.599392] PnPBIOS: Disabled by ACPI PNP
[ 19.599592] PCI: Using ACPI for IRQ routing
[ 19.599594] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 19.630621] NET: Registered protocol family 8
[ 19.630623] NET: Registered protocol family 20
[ 19.630655] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 19.630660] hpet0: 3 64-bit timers, 14318180 Hz
[ 19.631694] AppArmor: AppArmor Filesystem Enabled
[ 19.634611] Time: tsc clocksource has been installed.
[ 19.634625] Switched to high resolution mode on CPU 0
[ 19.642606] system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
[ 19.642610] system 00:01: iomem range 0xf0000000-0xf0003fff could not be reserved
[ 19.642613] system 00:01: iomem range 0xf0004000-0xf0004fff could not be reserved
[ 19.642616] system 00:01: iomem range 0xf0005000-0xf0005fff could not be reserved
[ 19.642619] system 00:01: iomem range 0xf0008000-0xf000bfff could not be reserved
[ 19.642622] system 00:01: iomem range 0xfed20000-0xfed8ffff could not be reserved
[ 19.642629] system 00:06: ioport range 0x300-0x30f has been reserved
[ 19.642632] system 00:06: ioport range 0x800-0x80f has been reserved
[ 19.642635] system 00:06: ioport range 0x1000-0x107f has been reserved
[ 19.642638] system 00:06: ioport range 0x1180-0x11bf has been reserved
[ 19.673680] PCI: Bridge: 0000:00:01.0
[ 19.673683] IO window: 2000-2fff
[ 19.673686] MEM window: b8100000-b81fffff
[ 19.673689] PREFETCH window: c8000000-cfffffff
[ 19.673693] PCI: Bridge: 0000:00:1c.0
[ 19.673696] IO window: 3000-3fff
[ 19.673701] MEM window: bc000000-bfffffff
[ 19.673706] PREFETCH window: d0000000-d3ffffff
[ 19.673711] PCI: Bridge: 0000:00:1c.2
[ 19.673714] IO window: 4000-4fff
[ 19.673720] MEM window: c0000000-c3ffffff
[ 19.673724] PREFETCH window: d4000000-d7ffffff
[ 19.673733] PCI: Bus 7, cardbus bridge: 0000:06:00.0
[ 19.673736] IO window: 00001400-000014ff
[ 19.673741] IO window: 00001c00-00001cff
[ 19.673746] PREFETCH window: 30000000-33ffffff
[ 19.673751] MEM window: 34000000-37ffffff
[ 19.673756] PCI: Bridge: 0000:00:1e.0
[ 19.673757] IO window: disabled.
[ 19.673763] MEM window: c4000000-c40fffff
[ 19.673767] PREFETCH window: disabled.
[ 19.673782] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 19.673787] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 19.673808] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 19.673814] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 19.673835] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 19.673841] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 19.673853] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 19.673869] ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 19.673883] NET: Registered protocol family 2
[ 19.710604] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 19.710789] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 19.710882] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[ 19.710973] TCP: Hash tables configured (established 16384 bind 16384)
[ 19.710976] TCP reno registered
[ 19.722640] checking if image is initramfs... it is
[ 20.465840] Freeing initrd memory: 7964k freed
[ 20.466056] Simple Boot Flag at 0x39 set to 0x1
[ 20.466473] audit: initializing netlink socket (disabled)
[ 20.466490] audit(1210159175.424:1): initialized
[ 20.468475] VFS: Disk quotas dquot_6.5.1
[ 20.468551] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 20.468704] io scheduler noop registered
[ 20.468706] io scheduler anticipatory registered
[ 20.468708] io scheduler deadline registered
[ 20.468720] io scheduler cfq registered (default)
[ 20.468815] Boot video device is 0000:01:00.0
[ 20.468926] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 20.468955] assign_interrupt_mode Found MSI capability
[ 20.468982] Allocate Port Service[0000:00:01.0:pcie00]
[ 20.469054] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 20.469106] assign_interrupt_mode Found MSI capability
[ 20.469147] Allocate Port Service[0000:00:1c.0:pcie00]
[ 20.469180] Allocate Port Service[0000:00:1c.0:pcie02]
[ 20.469271] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 20.469328] assign_interrupt_mode Found MSI capability
[ 20.469369] Allocate Port Service[0000:00:1c.2:pcie00]
[ 20.469402] Allocate Port Service[0000:00:1c.2:pcie02]
[ 20.469636] isapnp: Scanning for PnP cards...
[ 20.823550] isapnp: No Plug & Play device found
[ 20.849390] Real Time Clock Driver v1.12ac
[ 20.849635] hpet_resources: 0xfed00000 is busy
[ 20.849663] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 20.850813] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 20.850885] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 20.850975] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 20.855414] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 20.856879] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 20.856883] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 20.856886] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 20.856888] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 20.856890] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 20.866089] mice: PS/2 mouse device common for all mice
[ 20.866192] EISA: Probing bus 0 at eisa.0
[ 20.866199] Cannot allocate resource for EISA slot 1
[ 20.866202] Cannot allocate resource for EISA slot 2
[ 20.866204] Cannot allocate resource for EISA slot 3
[ 20.866206] Cannot allocate resource for EISA slot 4
[ 20.866223] EISA: Detected 0 cards.
[ 20.866226] cpuidle: using governor ladder
[ 20.866228] cpuidle: using governor menu
[ 20.866326] NET: Registered protocol family 1
[ 20.866353] Using IPI No-Shortcut mode
[ 20.866383] registered taskstats version 1
[ 20.866498] Magic number: 8:953:326
[ 20.866510] hash matches device ttyyf
[ 20.866593] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 20.866595] EDD information not available.
[ 20.866773] Freeing unused kernel memory: 364k freed
[ 20.886042] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 22.063037] fuse init (API version 7.9)
[ 22.080585] ACPI: Transitioning device [FAN0] to D3
[ 22.080588] ACPI: Transitioning device [FAN0] to D3
[ 22.080592] ACPI: Fan [FAN0] (off)
[ 22.086992] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 22.086997] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 22.087009] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126]
[ 22.089967] ACPI: Thermal Zone [TZ1] (40 C)
[ 22.091140] ACPI: Thermal Zone [TZ2] (56 C)
[ 22.741108] usbcore: registered new interface driver usbfs
[ 22.741131] usbcore: registered new interface driver hub
[ 22.749165] usbcore: registered new device driver usb
[ 22.753179] USB Universal Host Controller Interface driver v3.0
[ 22.753236] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 19
[ 22.753247] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 22.753252] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 22.753579] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 22.753611] uhci_hcd 0000:00:1d.0: irq 19, io base 0x00001800
[ 22.753737] usb usb1: configuration #1 chosen from 1 choice
[ 22.753761] hub 1-0:1.0: USB hub found
[ 22.753765] hub 1-0:1.0: 2 ports detected
[ 22.857212] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 20
[ 22.857226] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 22.857230] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 22.857253] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 22.857284] uhci_hcd 0000:00:1d.1: irq 20, io base 0x00001820
[ 22.857401] usb usb2: configuration #1 chosen from 1 choice
[ 22.857424] hub 2-0:1.0: USB hub found
[ 22.857430] hub 2-0:1.0: 2 ports detected
[ 22.877819] SCSI subsystem initialized
[ 22.949077] libata version 3.00 loaded.
[ 22.961154] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 22.961166] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 22.961171] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 22.961192] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 22.961225] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001840
[ 22.961330] usb usb3: configuration #1 chosen from 1 choice
[ 22.961353] hub 3-0:1.0: USB hub found
[ 22.961359] hub 3-0:1.0: 2 ports detected
[ 23.065113] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
[ 23.065125] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 23.065130] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 23.065152] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[ 23.065184] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001860
[ 23.065297] usb usb4: configuration #1 chosen from 1 choice
[ 23.065321] hub 4-0:1.0: USB hub found
[ 23.065326] hub 4-0:1.0: 2 ports detected
[ 23.169172] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 19
[ 23.169186] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 23.169190] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 23.169213] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[ 23.173115] ehci_hcd 0000:00:1d.7: debug port 1
[ 23.173122] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 23.173129] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xb8004000
[ 23.188947] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 23.189047] usb usb5: configuration #1 chosen from 1 choice
[ 23.189072] hub 5-0:1.0: USB hub found
[ 23.189078] hub 5-0:1.0: 8 ports detected
[ 23.293603] ata_piix 0000:00:1f.1: version 2.12
[ 23.293624] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
[ 23.293658] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 23.294326] scsi0 : ata_piix
[ 23.294743] scsi1 : ata_piix
[ 23.295267] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1880 irq 14
[ 23.295271] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1888 irq 15
[ 23.540781] Clocksource tsc unstable (delta = -5849672361 ns)
[ 23.545108] Time: hpet clocksource has been installed.
[ 23.547244] ata1.01: ATAPI: MATSHITADVD-RAM UJ-822S, 1.01, max UDMA/33
[ 23.554603] ata1.01: configured for UDMA/33
[ 23.554648] ata2: port disabled. ignoring.
[ 23.555088] scsi 0:0:1:0: CD-ROM MATSHITA DVD-RAM UJ-822S 1.01 PQ: 0 ANSI: 5
[ 23.555165] ata_piix 0000:00:1f.2: MAP [ P0 P2 -- -- ]
[ 23.560285] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 20
[ 23.560319] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 23.560355] scsi2 : ata_piix
[ 23.560490] scsi3 : ata_piix
[ 23.560543] ata3: SATA max UDMA/133 cmd 0x18c0 ctl 0x18b8 bmdma 0x18a0 irq 20
[ 23.560546] ata4: SATA max UDMA/133 cmd 0x18b0 ctl 0x1894 bmdma 0x18a8 irq 20
[ 23.566725] ata3.00: ATA-7: FUJITSU MHT2080BH, 0000104A, max UDMA/100
[ 23.566729] ata3.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 23.567611] ata3.00: configured for UDMA/100
[ 23.589397] scsi 2:0:0:0: Direct-Access ATA FUJITSU MHT2080B 0000 PQ: 0 ANSI: 5
[ 23.592581] ACPI: PCI Interrupt 0000:06:00.2[A] -> GSI 16 (level, low) -> IRQ 16
[ 23.642339] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[c4004000-c40047ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 23.654221] Driver 'sr' needs updating - please use bus_type methods
[ 23.660707] Driver 'sd' needs updating - please use bus_type methods
[ 23.661984] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 23.661988] Uniform CD-ROM driver Revision: 3.20
[ 23.662032] sr 0:0:1:0: Attached scsi CD-ROM sr0
[ 23.667250] sd 2:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[ 23.667263] sd 2:0:0:0: [sda] Write Protect is off
[ 23.667265] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 23.667281] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 23.667321] sd 2:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[ 23.667330] sd 2:0:0:0: [sda] Write Protect is off
[ 23.667332] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 23.667348] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 23.667351] sda:<5>sr 0:0:1:0: Attached scsi generic sg0 type 5
[ 23.667923] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 23.692112] sda1 sda2 < sda5 >
[ 23.693129] sd 2:0:0:0: [sda] Attached SCSI disk
[ 23.751880] Attempting manual resume
[ 23.751883] swsusp: Resume From Partition 8:5
[ 23.751885] PM: Checking swsusp image.
[ 23.752004] PM: Resume from disk failed.
[ 23.766218] kjournald starting. Commit interval 5 seconds
[ 23.766226] EXT3-fs: mounted filesystem with ordered data mode.
[ 23.852568] ieee1394: Host added: ID:BUS[0-00:1023] GUID[5422202200e09104]
[ 25.735107] Linux agpgart interface v0.102
[ 25.959755] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 26.011854] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 26.187806] input: Power Button (FF) as /devices/virtual/input/input2
[ 26.199600] ACPI: Power Button (FF) [PWRF]
[ 26.199681] input: Lid Switch as /devices/virtual/input/input3
[ 26.199764] ACPI: Lid Switch [LID0]
[ 26.199822] input: Power Button (CM) as /devices/virtual/input/input4
[ 26.215592] ACPI: Power Button (CM) [PWRB]
[ 26.215667] input: Sleep Button (CM) as /devices/virtual/input/input5
[ 26.227585] ACPI: Sleep Button (CM) [SLPB]
[ 26.235684] ACPI: AC Adapter [AC] (on-line)
[ 26.567867] ACPI: Battery Slot [CMB0] (battery present)
[ 26.567933] ACPI: WMI-Acer: Mapper loaded
[ 27.111272] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 27.111287] PCI: Setting latency timer of device 0000:02:00.0 to 64
[ 27.111319] sky2 0000:02:00.0: v1.20 addr 0xbc000000 irq 16 Yukon-EC (0xb6) rev 1
[ 27.111736] sky2 eth0: addr 00:e0:91:09:d0:f9
[ 27.445373] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input6
[ 27.458995] ACPI: Video Device [VGA] (multi-head: yes rom: yes post: no)
[ 27.459643] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input7
[ 27.474989] ACPI: Video Device [GFX0] (multi-head: yes rom: yes post: no)
[ 27.497266] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 27.830843] [fglrx] Maximum main memory to use for locked dma buffers: 430 MBytes.
[ 27.830884] [fglrx] ASYNCIO init succeed!
[ 27.831337] [fglrx] PAT is enabled successfully!
[ 27.832573] [fglrx] module loaded - fglrx 8.47.3 [Feb 25 2008] on minor 0
[ 28.155309] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 28.155333] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 28.926356] Yenta: CardBus bridge found at 0000:06:00.0 [1854:000c]
[ 28.926380] Yenta: Using INTVAL to route CSC interrupts to PCI
[ 28.926382] Yenta: Routing CardBus interrupts to PCI
[ 28.926388] Yenta TI: socket 0000:06:00.0, mfunc 0x01d01002, devctl 0x64
[ 29.053515] intel_rng: FWH not detected
[ 29.086237] ieee80211_crypt: registered algorithm 'NULL'
[ 29.126211] ieee80211: 802.11 data/management/control stack, git-1.1.13
[ 29.126215] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[ 29.158991] Yenta: ISA IRQ mask 0x0cf8, PCI irq 16
[ 29.158995] Socket status: 30000006
[ 29.158998] Yenta: Raising subordinate bus# of parent bus (#06) from #06 to #0a
[ 29.159003] pcmcia: parent PCI bridge Memory window: 0xc4000000 - 0xc40fffff
[ 29.190178] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
[ 29.190181] ipw2200: Copyright(c) 2003-2006 Intel Corporation
[ 29.220506] ACPI: PCI Interrupt 0000:06:02.0[A] -> GSI 18 (level, low) -> IRQ 18
[ 29.290122] ipw2200: Detected Intel PRO/Wireless 2915ABG Network Connection
[ 29.462051] iTCO_vendor_support: vendor-support=0
[ 29.514031] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
[ 29.514121] iTCO_wdt: Found a ICH6-M TCO device (Version=2, TCOBASE=0x1060)
[ 29.514155] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 29.825994] input: PC Speaker as /devices/platform/pcspkr/input/input8
[ 30.949694] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x2580b1, caps: 0xa04713/0x200000
[ 30.988036] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input9
[ 31.836534] ipw2200: Detected geography ZZE (13 802.11bg channels, 19 802.11a channels)
[ 31.836573] ACPI: PCI Interrupt 0000:06:00.3[A] -> GSI 16 (level, low) -> IRQ 16
[ 31.865735] cs: IO port probe 0x100-0x3af: clean.
[ 31.867423] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[ 31.868144] cs: IO port probe 0x820-0x8ff: clean.
[ 31.868739] cs: IO port probe 0xc00-0xcf7: clean.
[ 31.869489] cs: IO port probe 0xa00-0xaff: clean.
[ 31.966219] lp: driver loaded but no devices found
[ 32.155721] Adding 1502036k swap on /dev/sda5. Priority:-1 extents:1 across:1502036k
[ 32.232773] EXT3 FS on sda1, internal journal
[ 32.289714] device-mapper: uevent: version 1.0.3
[ 32.289742] device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com
[ 32.689809] ip_tables: (C) 2000-2006 Netfilter Core Team