rendered paste body[ 0.000000] Linux version 2.6.24-16-generic (buildd@palmer) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Thu Apr 10 13:23:42 UTC 2008 (Ubuntu 2.6.24-16.30-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001fe90000 (usable)
[ 0.000000] BIOS-e820: 000000001fe90000 - 000000001fe9a000 (ACPI data)
[ 0.000000] BIOS-e820: 000000001fe9a000 - 000000001ff00000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000001ff00000 - 0000000020000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0006000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0008000 - 00000000f000c000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 510MB LOWMEM available.
[ 0.000000] Entering add_active_range(0, 0, 130704) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 130704
[ 0.000000] HighMem 130704 -> 130704
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 130704
[ 0.000000] On node 0 totalpages: 130704
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 989 pages used for memmap
[ 0.000000] Normal zone: 125619 pages, LIFO batch:31
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP signature @ 0xC00F65C0 checksum 0
[ 0.000000] ACPI: RSDP 000F65C0, 0014 (r0 PTLTD )
[ 0.000000] ACPI: RSDT 1FE90F47, 0048 (r1 PTLTD HunterTL 6040000 LTP 0)
[ 0.000000] ACPI: FACP 1FE99E88, 0074 (r1 LGE HunterTL 6040000 LGE 5F)
[ 0.000000] ACPI: DSDT 1FE919DB, 84AD (r1 LGE HUNTER 6040000 INTL 20030224)
[ 0.000000] ACPI: FACS 1FEAAFC0, 0040
[ 0.000000] ACPI: APIC 1FE99EFC, 0068 (r1 INTEL ALVISO 6040000 LOHR 5F)
[ 0.000000] ACPI: HPET 1FE99F64, 0038 (r1 INTEL ALVISO 6040000 LOHR 5F)
[ 0.000000] ACPI: MCFG 1FE99F9C, 003C (r1 INTEL ALVISO 6040000 LOHR 5F)
[ 0.000000] ACPI: BOOT 1FE99FD8, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1)
[ 0.000000] ACPI: SSDT 1FE917AD, 022E (r1 SataRe SataAhci 1000 INTL 20030224)
[ 0.000000] ACPI: SSDT 1FE91368, 0235 (r1 PmRef Cpu0Ist 3000 INTL 20030224)
[ 0.000000] ACPI: SSDT 1FE911A8, 01C0 (r1 PmRef Cpu0Cst 3001 INTL 20030224)
[ 0.000000] ACPI: SSDT 1FE90F8F, 0219 (r1 PmRef CpuPm 3000 INTL 20030224)
[ 0.000000] ACPI: DMI detected: LG
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:13 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:c0000000)
[ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000dc000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000dc000 - 0000000000100000
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129683
[ 0.000000] Kernel command line: root=UUID=471e6075-9a7a-48fe-b02f-1ed032267542 ro quiet splash acpi=noirq
[ 0.000000] Found and enabled local APIC!
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 0.000000] Detected 1729.056 MHz processor.
[ 14.496002] Console: colour VGA+ 80x25
[ 14.496006] console [tty0] enabled
[ 14.496167] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 14.496362] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 14.507066] Memory: 505636k/522816k available (2157k kernel code, 16572k reserved, 998k data, 364k init, 0k highmem)
[ 14.507074] virtual kernel memory layout:
[ 14.507075] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB)
[ 14.507076] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 14.507078] vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB)
[ 14.507079] lowmem : 0xc0000000 - 0xdfe90000 ( 510 MB)
[ 14.507080] .init : 0xc041b000 - 0xc0476000 ( 364 kB)
[ 14.507081] .data : 0xc031b5a4 - 0xc0414dc4 ( 998 kB)
[ 14.507083] .text : 0xc0100000 - 0xc031b5a4 (2157 kB)
[ 14.507086] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 14.507121] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[ 14.507265] hpet clockevent registered
[ 14.587237] Calibrating delay using timer specific routine.. 3461.52 BogoMIPS (lpj=6923042)
[ 14.587258] Security Framework initialized
[ 14.587265] SELinux: Disabled at boot.
[ 14.587280] AppArmor: AppArmor initialized
[ 14.587283] Failure registering capabilities with primary security module.
[ 14.587291] Mount-cache hash table entries: 512
[ 14.587411] CPU: After generic identify, caps: afe9fbff 00100000 00000000 00000000 00000180 00000000 00000000 00000000
[ 14.587424] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 14.587426] CPU: L2 cache: 2048K
[ 14.587429] CPU: After all inits, caps: afe9fbff 00100000 00000000 00002040 00000180 00000000 00000000 00000000
[ 14.587438] Compat vDSO mapped to ffffe000.
[ 14.587449] Checking 'hlt' instruction... OK.
[ 14.603585] SMP alternatives: switching to UP code
[ 14.605371] Freeing SMP alternatives: 11k freed
[ 14.605472] Early unpacking initramfs... done
[ 14.983465] ACPI: Core revision 20070126
[ 14.983543] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 14.986724] ACPI: setting ELCR to 0ea0 (from 0ca0)
[ 14.989147] CPU0: Intel(R) Pentium(R) M processor 1.73GHz stepping 08
[ 14.989171] Total of 1 processors activated (3461.52 BogoMIPS).
[ 15.095064] Brought up 1 CPUs
[ 15.095079] CPU0 attaching sched-domain:
[ 15.095082] domain 0: span 01
[ 15.095084] groups: 01
[ 15.095243] net_namespace: 64 bytes
[ 15.095252] Booting paravirtualized kernel on bare hardware
[ 15.095716] Time: 9:25:31 Date: 05/07/08
[ 15.095738] NET: Registered protocol family 16
[ 15.095924] EISA bus registered
[ 15.095929] ACPI: bus type pci registered
[ 15.096396] PCI: PCI BIOS revision 2.10 entry at 0xfd90e, last bus=6
[ 15.096398] PCI: Using configuration type 1
[ 15.096400] Setting up standard PCI resources
[ 15.105125] ACPI: EC: Look up EC in DSDT
[ 15.107481] ACPI: Interpreter enabled
[ 15.107483] ACPI: (supports S0 S3 S4 S5)
[ 15.107497] ACPI: Using PIC for interrupt routing
[ 15.107798] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 15.116779] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[ 15.116782] ACPI: EC: driver started in interrupt mode
[ 15.116820] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 15.117464] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[ 15.117469] PCI quirk: region 1180-11bf claimed by ICH6 GPIO
[ 15.118405] PCI: Transparent bridge - 0000:00:1e.0
[ 15.118488] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 15.118906] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
[ 15.119098] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 15.119264] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[ 15.119440] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 15.122709] ACPI: Power Resource [CTHT] (off)
[ 15.122753] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 15.122781] pnp: PnP ACPI init
[ 15.122788] ACPI: bus type pnp registered
[ 15.125800] pnp: PnP ACPI: found 10 devices
[ 15.125803] ACPI: ACPI bus type pnp unregistered
[ 15.125806] PnPBIOS: Disabled by ACPI PNP
[ 15.126007] PCI: Probing PCI hardware
[ 15.126021] sysfs: duplicate filename 'bridge' can not be created
[ 15.126024] WARNING: at /build/buildd/linux-2.6.24/fs/sysfs/dir.c:424 sysfs_add_one()
[ 15.126028] Pid: 1, comm: swapper Not tainted 2.6.24-16-generic #1
[ 15.126032] [<c01d29af>] sysfs_add_one+0x9f/0xe0
[ 15.126040] [<c01d379a>] sysfs_create_link+0x8a/0x110
[ 15.126044] [<c021d23e>] pci_bus_add_devices+0x9e/0x130
[ 15.126049] [<c0296f7b>] pcibios_scan_root+0x1b/0x80
[ 15.126054] [<c043f6f1>] pci_legacy_init+0x51/0x100
[ 15.126059] [<c041b551>] kernel_init+0x131/0x320
[ 15.126064] [<c01042e6>] ret_from_fork+0x6/0x20
[ 15.126068] [<c041b420>] kernel_init+0x0/0x320
[ 15.126071] [<c041b420>] kernel_init+0x0/0x320
[ 15.126074] [<c0105677>] kernel_thread_helper+0x7/0x10
[ 15.126078] =======================
[ 15.126081] pci 0000:00:01.0: Error creating sysfs bridge symlink, continuing...
[ 15.126130] sysfs: duplicate filename 'bridge' can not be created
[ 15.126132] WARNING: at /build/buildd/linux-2.6.24/fs/sysfs/dir.c:424 sysfs_add_one()
[ 15.126135] Pid: 1, comm: swapper Not tainted 2.6.24-16-generic #1
[ 15.126137] [<c01d29af>] sysfs_add_one+0x9f/0xe0
[ 15.126140] [<c01d379a>] sysfs_create_link+0x8a/0x110
[ 15.126144] [<c021d23e>] pci_bus_add_devices+0x9e/0x130
[ 15.126148] [<c043f6f1>] pci_legacy_init+0x51/0x100
[ 15.126151] [<c041b551>] kernel_init+0x131/0x320
[ 15.126154] [<c01042e6>] ret_from_fork+0x6/0x20
[ 15.126158] [<c041b420>] kernel_init+0x0/0x320
[ 15.126161] [<c041b420>] kernel_init+0x0/0x320
[ 15.126164] [<c0105677>] kernel_thread_helper+0x7/0x10
[ 15.126167] =======================
[ 15.126169] pci 0000:00:1c.0: Error creating sysfs bridge symlink, continuing...
[ 15.126214] sysfs: duplicate filename 'bridge' can not be created
[ 15.126217] WARNING: at /build/buildd/linux-2.6.24/fs/sysfs/dir.c:424 sysfs_add_one()
[ 15.126219] Pid: 1, comm: swapper Not tainted 2.6.24-16-generic #1
[ 15.126221] [<c01d29af>] sysfs_add_one+0x9f/0xe0
[ 15.126225] [<c01d379a>] sysfs_create_link+0x8a/0x110
[ 15.126228] [<c021d23e>] pci_bus_add_devices+0x9e/0x130
[ 15.126232] [<c043f6f1>] pci_legacy_init+0x51/0x100
[ 15.126235] [<c041b551>] kernel_init+0x131/0x320
[ 15.126239] [<c01042e6>] ret_from_fork+0x6/0x20
[ 15.126242] [<c041b420>] kernel_init+0x0/0x320
[ 15.126245] [<c041b420>] kernel_init+0x0/0x320
[ 15.126248] [<c0105677>] kernel_thread_helper+0x7/0x10
[ 15.126252] =======================
[ 15.126253] pci 0000:00:1c.2: Error creating sysfs bridge symlink, continuing...
[ 15.126298] sysfs: duplicate filename 'bridge' can not be created
[ 15.126301] WARNING: at /build/buildd/linux-2.6.24/fs/sysfs/dir.c:424 sysfs_add_one()
[ 15.126303] Pid: 1, comm: swapper Not tainted 2.6.24-16-generic #1
[ 15.126305] [<c01d29af>] sysfs_add_one+0x9f/0xe0
[ 15.126309] [<c01d379a>] sysfs_create_link+0x8a/0x110
[ 15.126312] [<c021d23e>] pci_bus_add_devices+0x9e/0x130
[ 15.126316] [<c021d226>] pci_bus_add_devices+0x86/0x130
[ 15.126319] [<c043f6f1>] pci_legacy_init+0x51/0x100
[ 15.126323] [<c041b551>] kernel_init+0x131/0x320
[ 15.126326] [<c01042e6>] ret_from_fork+0x6/0x20
[ 15.126329] [<c041b420>] kernel_init+0x0/0x320
[ 15.126332] [<c041b420>] kernel_init+0x0/0x320
[ 15.126335] [<c0105677>] kernel_thread_helper+0x7/0x10
[ 15.126339] =======================
[ 15.126341] pci 0000:06:00.0: Error creating sysfs bridge symlink, continuing...
[ 15.126385] sysfs: duplicate filename 'bridge' can not be created
[ 15.126388] WARNING: at /build/buildd/linux-2.6.24/fs/sysfs/dir.c:424 sysfs_add_one()
[ 15.126390] Pid: 1, comm: swapper Not tainted 2.6.24-16-generic #1
[ 15.126392] [<c01d29af>] sysfs_add_one+0x9f/0xe0
[ 15.126396] [<c01d379a>] sysfs_create_link+0x8a/0x110
[ 15.126399] [<c012ce7b>] printk+0x1b/0x20
[ 15.126403] [<c021d23e>] pci_bus_add_devices+0x9e/0x130
[ 15.126406] [<c043f6f1>] pci_legacy_init+0x51/0x100
[ 15.126409] [<c041b551>] kernel_init+0x131/0x320
[ 15.126413] [<c01042e6>] ret_from_fork+0x6/0x20
[ 15.126416] [<c041b420>] kernel_init+0x0/0x320
[ 15.126419] [<c041b420>] kernel_init+0x0/0x320
[ 15.126422] [<c0105677>] kernel_thread_helper+0x7/0x10
[ 15.126426] =======================
[ 15.126428] pci 0000:00:1e.0: Error creating sysfs bridge symlink, continuing...
[ 15.126659] PCI: Discovered primary peer bus 03 [IRQ]
[ 15.126735] PCI: Discovered primary peer bus 05 [IRQ]
[ 15.126741] PCI: Using IRQ router PIIX/ICH [8086/2641] at 0000:00:1f.0
[ 15.126766] PCI: setting IRQ 7 as level-triggered
[ 15.126770] PCI: Found IRQ 7 for device 0000:00:1f.1
[ 15.126777] PCI: Sharing IRQ 7 with 0000:00:1c.2
[ 15.126783] PCI: Sharing IRQ 7 with 0000:00:1d.2
[ 15.126805] PCI: Sharing IRQ 7 with 0000:06:02.0
[ 15.126820] PCI: setting IRQ 10 as level-triggered
[ 15.126823] PCI: Found IRQ 10 for device 0000:06:00.2
[ 15.126826] PCI: Sharing IRQ 10 with 0000:00:01.0
[ 15.126829] PCI: Sharing IRQ 10 with 0000:00:1b.0
[ 15.126839] PCI: Sharing IRQ 10 with 0000:00:1d.3
[ 15.126851] PCI: Sharing IRQ 10 with 0000:01:00.0
[ 15.126855] PCI: Sharing IRQ 10 with 0000:02:00.0
[ 15.126858] PCI: Sharing IRQ 10 with 0000:06:00.0
[ 15.126864] PCI: Sharing IRQ 10 with 0000:06:00.3
[ 15.159004] NET: Registered protocol family 8
[ 15.159006] NET: Registered protocol family 20
[ 15.159038] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 15.159042] hpet0: 3 64-bit timers, 14318180 Hz
[ 15.160076] AppArmor: AppArmor Filesystem Enabled
[ 15.162995] Time: tsc clocksource has been installed.
[ 15.163012] Switched to high resolution mode on CPU 0
[ 15.170993] system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
[ 15.170996] system 00:01: iomem range 0xf0000000-0xf0003fff could not be reserved
[ 15.170999] system 00:01: iomem range 0xf0004000-0xf0004fff could not be reserved
[ 15.171002] system 00:01: iomem range 0xf0005000-0xf0005fff could not be reserved
[ 15.171006] system 00:01: iomem range 0xf0008000-0xf000bfff could not be reserved
[ 15.171009] system 00:01: iomem range 0xfed20000-0xfed8ffff could not be reserved
[ 15.171016] system 00:06: ioport range 0x300-0x30f has been reserved
[ 15.171018] system 00:06: ioport range 0x800-0x80f has been reserved
[ 15.171021] system 00:06: ioport range 0x1000-0x107f has been reserved
[ 15.171024] system 00:06: ioport range 0x1180-0x11bf has been reserved
[ 15.202070] PCI: Bridge: 0000:00:01.0
[ 15.202072] IO window: 2000-2fff
[ 15.202076] MEM window: b8100000-b81fffff
[ 15.202079] PREFETCH window: c8000000-cfffffff
[ 15.202083] PCI: Bridge: 0000:00:1c.0
[ 15.202086] IO window: 3000-3fff
[ 15.202091] MEM window: bc000000-bfffffff
[ 15.202096] PREFETCH window: d0000000-d3ffffff
[ 15.202101] PCI: Bridge: 0000:00:1c.2
[ 15.202104] IO window: 4000-4fff
[ 15.202109] MEM window: c0000000-c3ffffff
[ 15.202114] PREFETCH window: d4000000-d7ffffff
[ 15.202123] PCI: Bus 7, cardbus bridge: 0000:06:00.0
[ 15.202125] IO window: 00001400-000014ff
[ 15.202130] IO window: 00001c00-00001cff
[ 15.202136] PREFETCH window: 30000000-33ffffff
[ 15.202141] MEM window: 34000000-37ffffff
[ 15.202146] PCI: Bridge: 0000:00:1e.0
[ 15.202147] IO window: disabled.
[ 15.202153] MEM window: c4000000-c40fffff
[ 15.202157] PREFETCH window: disabled.
[ 15.202173] PCI: Found IRQ 10 for device 0000:00:01.0
[ 15.202178] PCI: Sharing IRQ 10 with 0000:00:1b.0
[ 15.202188] PCI: Sharing IRQ 10 with 0000:00:1d.3
[ 15.202200] PCI: Sharing IRQ 10 with 0000:01:00.0
[ 15.202203] PCI: Sharing IRQ 10 with 0000:02:00.0
[ 15.202207] PCI: Sharing IRQ 10 with 0000:06:00.0
[ 15.202211] PCI: Sharing IRQ 10 with 0000:06:00.2
[ 15.202214] PCI: Sharing IRQ 10 with 0000:06:00.3
[ 15.202219] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 15.202244] PCI: Found IRQ 10 for device 0000:00:1c.0
[ 15.202278] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 15.202303] PCI: Found IRQ 7 for device 0000:00:1c.2
[ 15.202314] PCI: Sharing IRQ 7 with 0000:00:1d.2
[ 15.202323] PCI: Sharing IRQ 7 with 0000:00:1f.1
[ 15.202338] PCI: Sharing IRQ 7 with 0000:06:02.0
[ 15.202343] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 15.202357] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 15.202378] PCI: Found IRQ 10 for device 0000:06:00.0
[ 15.202381] PCI: Sharing IRQ 10 with 0000:00:01.0
[ 15.202384] PCI: Sharing IRQ 10 with 0000:00:1b.0
[ 15.202394] PCI: Sharing IRQ 10 with 0000:00:1d.3
[ 15.202406] PCI: Sharing IRQ 10 with 0000:01:00.0
[ 15.202410] PCI: Sharing IRQ 10 with 0000:02:00.0
[ 15.202415] PCI: Sharing IRQ 10 with 0000:06:00.2
[ 15.202419] PCI: Sharing IRQ 10 with 0000:06:00.3
[ 15.202432] NET: Registered protocol family 2
[ 15.238991] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 15.239171] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 15.239263] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[ 15.239354] TCP: Hash tables configured (established 16384 bind 16384)
[ 15.239356] TCP reno registered
[ 15.251032] checking if image is initramfs... it is
[ 15.994116] Freeing initrd memory: 7964k freed
[ 15.994331] Simple Boot Flag at 0x39 set to 0x1
[ 15.994735] audit: initializing netlink socket (disabled)
[ 15.994752] audit(1210152331.380:1): initialized
[ 15.996732] VFS: Disk quotas dquot_6.5.1
[ 15.996808] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 15.996955] io scheduler noop registered
[ 15.996957] io scheduler anticipatory registered
[ 15.996959] io scheduler deadline registered
[ 15.996971] io scheduler cfq registered (default)
[ 15.997065] Boot video device is 0000:01:00.0
[ 15.997173] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 15.997201] assign_interrupt_mode Found MSI capability
[ 15.997228] Allocate Port Service[0000:00:01.0:pcie00]
[ 15.997300] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 15.997351] assign_interrupt_mode Found MSI capability
[ 15.997392] Allocate Port Service[0000:00:1c.0:pcie00]
[ 15.997423] Allocate Port Service[0000:00:1c.0:pcie02]
[ 15.997516] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 15.997573] assign_interrupt_mode Found MSI capability
[ 15.997614] Allocate Port Service[0000:00:1c.2:pcie00]
[ 15.997647] Allocate Port Service[0000:00:1c.2:pcie02]
[ 15.997836] isapnp: Scanning for PnP cards...
[ 16.351735] isapnp: No Plug & Play device found
[ 16.377715] Real Time Clock Driver v1.12ac
[ 16.377965] hpet_resources: 0xfed00000 is busy
[ 16.377993] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 16.379135] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 16.379207] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 16.379299] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 16.382160] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 16.384605] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 16.384609] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 16.384612] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 16.384614] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 16.384617] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 16.386582] mice: PS/2 mouse device common for all mice
[ 16.386685] EISA: Probing bus 0 at eisa.0
[ 16.386692] Cannot allocate resource for EISA slot 1
[ 16.386695] Cannot allocate resource for EISA slot 2
[ 16.386697] Cannot allocate resource for EISA slot 3
[ 16.386699] Cannot allocate resource for EISA slot 4
[ 16.386716] EISA: Detected 0 cards.
[ 16.386719] cpuidle: using governor ladder
[ 16.386721] cpuidle: using governor menu
[ 16.386825] NET: Registered protocol family 1
[ 16.386854] Using IPI No-Shortcut mode
[ 16.386886] registered taskstats version 1
[ 16.387002] Magic number: 8:844:423
[ 16.387094] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 16.387096] EDD information not available.
[ 16.387273] Freeing unused kernel memory: 364k freed
[ 16.406460] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 17.584250] fuse init (API version 7.9)
[ 17.602996] ACPI: Transitioning device [FAN0] to D3
[ 17.602999] ACPI: Transitioning device [FAN0] to D3
[ 17.603003] ACPI: Fan [FAN0] (off)
[ 17.609426] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 17.609431] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 17.609443] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126]
[ 17.612027] ACPI: Thermal Zone [TZ1] (40 C)
[ 17.613473] ACPI: Thermal Zone [TZ2] (53 C)
[ 18.264033] usbcore: registered new interface driver usbfs
[ 18.264056] usbcore: registered new interface driver hub
[ 18.269623] usbcore: registered new device driver usb
[ 18.277619] USB Universal Host Controller Interface driver v3.0
[ 18.277677] PCI: setting IRQ 5 as level-triggered
[ 18.277681] PCI: Found IRQ 5 for device 0000:00:1d.0
[ 18.277697] PCI: Sharing IRQ 5 with 0000:00:1d.7
[ 18.277727] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 18.277731] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 18.278060] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 18.278089] uhci_hcd 0000:00:1d.0: irq 5, io base 0x00001800
[ 18.278211] usb usb1: configuration #1 chosen from 1 choice
[ 18.278232] hub 1-0:1.0: USB hub found
[ 18.278237] hub 1-0:1.0: 2 ports detected
[ 18.381673] PCI: setting IRQ 11 as level-triggered
[ 18.381678] PCI: Found IRQ 11 for device 0000:00:1d.1
[ 18.381702] PCI: Sharing IRQ 11 with 0000:00:1f.2
[ 18.381706] PCI: Sharing IRQ 11 with 0000:00:1f.3
[ 18.381727] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 18.381731] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 18.381753] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 18.381785] uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001820
[ 18.381896] usb usb2: configuration #1 chosen from 1 choice
[ 18.381923] hub 2-0:1.0: USB hub found
[ 18.381929] hub 2-0:1.0: 2 ports detected
[ 18.405756] SCSI subsystem initialized
[ 18.466770] libata version 3.00 loaded.
[ 18.485618] PCI: Found IRQ 7 for device 0000:00:1d.2
[ 18.485641] PCI: Sharing IRQ 7 with 0000:00:1f.1
[ 18.485659] PCI: Sharing IRQ 7 with 0000:06:02.0
[ 18.485668] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 18.485673] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 18.485695] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 18.485726] uhci_hcd 0000:00:1d.2: irq 7, io base 0x00001840
[ 18.485828] usb usb3: configuration #1 chosen from 1 choice
[ 18.485850] hub 3-0:1.0: USB hub found
[ 18.485855] hub 3-0:1.0: 2 ports detected
[ 18.589569] PCI: Found IRQ 10 for device 0000:00:1d.3
[ 18.589576] PCI: Sharing IRQ 10 with 0000:00:1b.0
[ 18.589599] PCI: Sharing IRQ 10 with 0000:01:00.0
[ 18.589603] PCI: Sharing IRQ 10 with 0000:02:00.0
[ 18.589607] PCI: Sharing IRQ 10 with 0000:06:00.0
[ 18.589611] PCI: Sharing IRQ 10 with 0000:06:00.2
[ 18.589615] PCI: Sharing IRQ 10 with 0000:06:00.3
[ 18.589626] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 18.589631] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 18.589653] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[ 18.589684] uhci_hcd 0000:00:1d.3: irq 10, io base 0x00001860
[ 18.589797] usb usb4: configuration #1 chosen from 1 choice
[ 18.589820] hub 4-0:1.0: USB hub found
[ 18.589825] hub 4-0:1.0: 2 ports detected
[ 18.693636] PCI: Found IRQ 5 for device 0000:00:1d.7
[ 18.693647] PCI: Sharing IRQ 5 with 0000:00:1d.0
[ 18.693682] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 18.693686] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 18.693710] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[ 18.697626] ehci_hcd 0000:00:1d.7: debug port 1
[ 18.697632] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 18.697639] ehci_hcd 0000:00:1d.7: irq 5, io mem 0xb8004000
[ 18.713412] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 18.713510] usb usb5: configuration #1 chosen from 1 choice
[ 18.713534] hub 5-0:1.0: USB hub found
[ 18.713540] hub 5-0:1.0: 8 ports detected
[ 18.818067] ata_piix 0000:00:1f.1: version 2.12
[ 18.818092] PCI: Found IRQ 7 for device 0000:00:1f.1
[ 18.818104] PCI: Sharing IRQ 7 with 0000:00:1d.2
[ 18.818126] PCI: Sharing IRQ 7 with 0000:06:02.0
[ 18.818158] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 18.818863] scsi0 : ata_piix
[ 18.819281] scsi1 : ata_piix
[ 18.819809] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1880 irq 14
[ 18.819812] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1888 irq 15
[ 19.113238] Clocksource tsc unstable (delta = -6971480006 ns)
[ 19.117430] Time: hpet clocksource has been installed.
[ 19.119873] ata1.01: ATAPI: MATSHITADVD-RAM UJ-822S, 1.01, max UDMA/33
[ 19.126041] ata1.01: configured for UDMA/33
[ 19.126085] ata2: port disabled. ignoring.
[ 19.126548] scsi 0:0:1:0: CD-ROM MATSHITA DVD-RAM UJ-822S 1.01 PQ: 0 ANSI: 5
[ 19.126625] ata_piix 0000:00:1f.2: MAP [ P0 P2 -- -- ]
[ 19.132623] PCI: Found IRQ 11 for device 0000:00:1f.2
[ 19.132635] PCI: Sharing IRQ 11 with 0000:00:1d.1
[ 19.132650] PCI: Sharing IRQ 11 with 0000:00:1f.3
[ 19.132691] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 19.132729] scsi2 : ata_piix
[ 19.132864] scsi3 : ata_piix
[ 19.132917] ata3: SATA max UDMA/133 cmd 0x18c0 ctl 0x18b8 bmdma 0x18a0 irq 11
[ 19.132920] ata4: SATA max UDMA/133 cmd 0x18b0 ctl 0x1894 bmdma 0x18a8 irq 11
[ 19.138915] ata3.00: ATA-7: FUJITSU MHT2080BH, 0000104A, max UDMA/100
[ 19.138919] ata3.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 19.139814] ata3.00: configured for UDMA/100
[ 19.160976] scsi 2:0:0:0: Direct-Access ATA FUJITSU MHT2080B 0000 PQ: 0 ANSI: 5
[ 19.164172] PCI: Found IRQ 10 for device 0000:06:00.2
[ 19.164177] PCI: Sharing IRQ 10 with 0000:00:1b.0
[ 19.164188] PCI: Sharing IRQ 10 with 0000:00:1d.3
[ 19.164200] PCI: Sharing IRQ 10 with 0000:01:00.0
[ 19.164203] PCI: Sharing IRQ 10 with 0000:02:00.0
[ 19.164207] PCI: Sharing IRQ 10 with 0000:06:00.0
[ 19.164212] PCI: Sharing IRQ 10 with 0000:06:00.3
[ 19.213962] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[10] MMIO=[c4004000-c40047ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 19.227104] Driver 'sr' needs updating - please use bus_type methods
[ 19.233683] Driver 'sd' needs updating - please use bus_type methods
[ 19.234970] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 19.234974] Uniform CD-ROM driver Revision: 3.20
[ 19.235016] sr 0:0:1:0: Attached scsi CD-ROM sr0
[ 19.239521] sd 2:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[ 19.239534] sd 2:0:0:0: [sda] Write Protect is off
[ 19.239537] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 19.239553] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 19.239592] sd 2:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[ 19.239602] sd 2:0:0:0: [sda] Write Protect is off
[ 19.239604] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 19.239619] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 19.239623] sda:<5>sr 0:0:1:0: Attached scsi generic sg0 type 5
[ 19.240181] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 19.264640] sda1 sda2 < sda5 >
[ 19.265638] sd 2:0:0:0: [sda] Attached SCSI disk
[ 19.327006] Attempting manual resume
[ 19.327009] swsusp: Resume From Partition 8:5
[ 19.327011] PM: Checking swsusp image.
[ 19.327148] PM: Resume from disk failed.
[ 19.339757] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 19.339760] EXT3-fs: write access will be enabled during recovery.
[ 19.459373] kjournald starting. Commit interval 5 seconds
[ 19.459387] EXT3-fs: recovery complete.
[ 19.459699] EXT3-fs: mounted filesystem with ordered data mode.
[ 19.476726] ieee1394: Host added: ID:BUS[0-00:1023] GUID[5422202200e09104]
[ 21.495392] Linux agpgart interface v0.102
[ 21.696548] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 21.741734] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 21.927738] input: Power Button (FF) as /devices/virtual/input/input2
[ 21.940383] ACPI: Power Button (FF) [PWRF]
[ 21.940452] input: Lid Switch as /devices/virtual/input/input3
[ 21.940532] ACPI: Lid Switch [LID0]
[ 21.940589] input: Power Button (CM) as /devices/virtual/input/input4
[ 21.952404] ACPI: Power Button (CM) [PWRB]
[ 21.952482] input: Sleep Button (CM) as /devices/virtual/input/input5
[ 21.964371] ACPI: Sleep Button (CM) [SLPB]
[ 22.252344] ACPI: AC Adapter [AC] (on-line)
[ 22.389790] ACPI: Battery Slot [CMB0] (battery present)
[ 22.389861] ACPI: WMI-Acer: Mapper loaded
[ 22.540592] intel_rng: FWH not detected
[ 22.700479] iTCO_vendor_support: vendor-support=0
[ 22.742330] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
[ 22.742449] iTCO_wdt: Found a ICH6-M TCO device (Version=2, TCOBASE=0x1060)
[ 22.742495] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 22.836075] PCI: Found IRQ 10 for device 0000:02:00.0
[ 22.836083] PCI: Sharing IRQ 10 with 0000:00:1b.0
[ 22.836094] PCI: Sharing IRQ 10 with 0000:00:1d.3
[ 22.836106] PCI: Sharing IRQ 10 with 0000:01:00.0
[ 22.836112] PCI: Sharing IRQ 10 with 0000:06:00.0
[ 22.836116] PCI: Sharing IRQ 10 with 0000:06:00.2
[ 22.836120] PCI: Sharing IRQ 10 with 0000:06:00.3
[ 22.836133] PCI: Setting latency timer of device 0000:02:00.0 to 64
[ 22.836166] sky2 0000:02:00.0: v1.20 addr 0xbc000000 irq 10 Yukon-EC (0xb6) rev 1
[ 22.836594] sky2 eth0: addr 00:e0:91:09:d0:f9
[ 23.382377] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 23.591622] [fglrx] Maximum main memory to use for locked dma buffers: 430 MBytes.
[ 23.591663] [fglrx] ASYNCIO init succeed!
[ 23.592170] [fglrx] PAT is enabled successfully!
[ 23.593497] [fglrx] module loaded - fglrx 8.47.3 [Feb 25 2008] on minor 0
[ 23.723552] ieee80211_crypt: registered algorithm 'NULL'
[ 23.775526] ieee80211: 802.11 data/management/control stack, git-1.1.13
[ 23.775531] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[ 23.883532] Yenta: CardBus bridge found at 0000:06:00.0 [1854:000c]
[ 23.883557] Yenta: Using INTVAL to route CSC interrupts to PCI
[ 23.883559] Yenta: Routing CardBus interrupts to PCI
[ 23.883565] Yenta TI: socket 0000:06:00.0, mfunc 0x01d01002, devctl 0x64
[ 23.984638] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input6
[ 23.995425] ACPI: Video Device [VGA] (multi-head: yes rom: yes post: no)
[ 23.996045] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input7
[ 24.003396] ACPI: Video Device [GFX0] (multi-head: yes rom: yes post: no)
[ 24.115730] Yenta: ISA IRQ mask 0x0058, PCI irq 10
[ 24.115735] Socket status: 30000006
[ 24.115738] Yenta: Raising subordinate bus# of parent bus (#06) from #06 to #0a
[ 24.115743] pcmcia: parent PCI bridge Memory window: 0xc4000000 - 0xc40fffff
[ 24.199385] PCI: Found IRQ 10 for device 0000:06:00.3
[ 24.199392] PCI: Sharing IRQ 10 with 0000:00:1b.0
[ 24.199403] PCI: Sharing IRQ 10 with 0000:00:1d.3
[ 24.199415] PCI: Sharing IRQ 10 with 0000:01:00.0
[ 24.199421] PCI: Sharing IRQ 10 with 0000:06:00.0
[ 24.199424] PCI: Sharing IRQ 10 with 0000:06:00.2
[ 24.261111] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
[ 24.261115] ipw2200: Copyright(c) 2003-2006 Intel Corporation
[ 24.261208] PCI: Found IRQ 7 for device 0000:06:02.0
[ 24.261221] PCI: Sharing IRQ 7 with 0000:00:1d.2
[ 24.261230] PCI: Sharing IRQ 7 with 0000:00:1f.1
[ 24.301092] ipw2200: Detected Intel PRO/Wireless 2915ABG Network Connection
[ 24.341286] PCI: Found IRQ 10 for device 0000:00:1b.0
[ 24.341303] PCI: Sharing IRQ 10 with 0000:00:1d.3
[ 24.341317] PCI: Sharing IRQ 10 with 0000:01:00.0
[ 24.341323] PCI: Sharing IRQ 10 with 0000:06:00.0
[ 24.341327] PCI: Sharing IRQ 10 with 0000:06:00.2
[ 24.341331] PCI: Sharing IRQ 10 with 0000:06:00.3
[ 24.341357] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 25.531193] input: PC Speaker as /devices/platform/pcspkr/input/input8
[ 26.879899] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x2580b1, caps: 0xa04713/0x200000
[ 26.918180] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input9
[ 27.515625] cs: IO port probe 0x100-0x3af: clean.
[ 27.517292] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[ 27.518021] cs: IO port probe 0x820-0x8ff: clean.
[ 27.518612] cs: IO port probe 0xc00-0xcf7: clean.
[ 27.519360] cs: IO port probe 0xa00-0xaff: clean.
[ 27.574657] ipw2200: Detected geography ZZE (13 802.11bg channels, 19 802.11a channels)
[ 27.716758] lp: driver loaded but no devices found
[ 27.908282] Adding 1502036k swap on /dev/sda5. Priority:-1 extents:1 across:1502036k
[ 27.985743] EXT3 FS on sda1, internal journal
[ 28.042306] device-mapper: uevent: version 1.0.3
[ 28.042334] device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com
[ 28.443421] ip_tables: (C) 2000-2006 Netfilter Core Team