root

Linux version 2.6.24.4-desktop586-1mnb (lcapitulino@n5.mandriva.com) (gcc version 4.2.3 (4.2.3-6mnb1)) #1 SMP Thu Mar 27 14:20:33 CET 2008BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007fed0000 (usable) BIOS-e820: 000000007fed0000 - 000000007fedc000 (ACPI NVS) BIOS-e820: 000000007fedc000 - 0000000080000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)Warning only 896MB will be used.Use a HIGHMEM enabled kernel.896MB LOWMEM available.found SMP MP-table at 000f8030Entering add_active_range(0, 0, 229376) 0 entries of 256 usedZone PFN ranges:  DMA             0 ->     4096  Normal       4096 ->   229376Movable zone start PFN for each nodeearly_node_map[1] active PFN ranges    0:        0 ->   229376On node 0 totalpages: 229376  DMA zone: 32 pages used for memmap  DMA zone: 0 pages reserved  DMA zone: 4064 pages, LIFO batch:0  Normal zone: 1760 pages used for memmap  Normal zone: 223520 pages, LIFO batch:31  Movable zone: 0 pages used for memmapDMI present.ACPI: RSDP 000F8000, 0024 (r2 PTLTD )ACPI: XSDT 7FED257A, 0084 (r1 FSC    PC        6040000  LTP        0)ACPI: FACP 7FED8AF6, 00F4 (r3 INTEL  CRESTLNE  6040000 ALAN        1)ACPI: DSDT 7FED3995, 50ED (r2 ECS    F40       6040000 INTL 20050624)ACPI: FACS 7FEDBFC0, 0040ACPI: HPET 7FED8BEA, 0038 (r1 INTEL  CRESTLNE  6040000 LOHR       5A)ACPI: MCFG 7FED8C22, 003C (r1 INTEL  CRESTLNE  6040000 LOHR       5A)ACPI: TMOR 7FED8C5E, 0026 (r1 PTLTD            6040000 PTL         3)ACPI: APIC 7FED8C84, 0068 (r1 PTLTD  	 APIC    6040000  LTP        0)ACPI: SLIC 7FED8CEC, 0176 (r1 FSC    PC        6040000  LTP        0)ACPI: BOOT 7FED8E62, 0028 (r1 PTLTD  $SBFTBL$  6040000  LTP        1)ACPI: SLIC 7FED8E8A, 0176 (r1 FSC    PC        6040000  LTP        0)ACPI: SSDT 7FED36B8, 02DD (r1 SataRe SataAhci     1000 INTL 20050624)ACPI: SSDT 7FED2B8A, 025F (r1  PmRef  Cpu0Tst     3000 INTL 20050624)ACPI: SSDT 7FED2AE4, 00A6 (r1  PmRef  Cpu1Tst     3000 INTL 20050624)ACPI: SSDT 7FED25FE, 04E6 (r1  PmRef    CpuPm     3000 INTL 20050624)ACPI: DMI detected: Fujitsu SiemensACPI: PM-Timer IO Port: 0x1008ACPI: Local APIC address 0xfee00000ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)Processor #0 6:15 APIC version 20ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)Processor #1 6:15 APIC version 20ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)ACPI: IRQ0 used by override.ACPI: IRQ2 used by override.ACPI: IRQ9 used by override.Enabling APIC mode:  Flat.  Using 1 I/O APICsACPI: HPET id: 0x8086a201 base: 0xfed00000Using ACPI (MADT) for SMP configuration informationAllocating PCI resources starting at 88000000 (gap: 80000000:60000000)swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000ce000swsusp: Registered nosave memory region: 00000000000ce000 - 00000000000d0000swsusp: Registered nosave memory region: 00000000000d0000 - 00000000000e0000swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 227584Kernel command line: BOOT_IMAGE=linux root=UUID=2f66ce94-13b3-4458-b574-05be683c31fd resume=/dev/sda7 splash=silent vga=788bootsplash: silent mode.mapped APIC to ffffb000 (fee00000)mapped IOAPIC to ffffa000 (fec00000)Enabling fast FPU save and restore... done.Enabling unmasked SIMD FPU exception support... done.Initializing CPU#0PID hash table entries: 4096 (order: 12, 16384 bytes)Detected 2194.634 MHz processor.Console: colour dummy device 80x25console [tty0] enabledDentry cache hash table entries: 131072 (order: 7, 524288 bytes)Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)Memory: 901852k/917504k available (2308k kernel code, 14604k reserved, 788k data, 288k init, 0k highmem, 0k BadRAM)virtual kernel memory layout:    fixmap  : 0xfffb3000 - 0xfffff000   ( 304 kB)    vmalloc : 0xf8800000 - 0xfffb1000   ( 119 MB)    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)      .init : 0xc040e000 - 0xc0456000   ( 288 kB)      .data : 0xc0341103 - 0xc0406284   ( 788 kB)      .text : 0xc0100000 - 0xc0341103   (2308 kB)Checking if this processor honours the WP bit even in supervisor mode... Ok.SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1hpet clockevent registeredCalibrating delay using timer specific routine.. 4392.57 BogoMIPS (lpj=2196286)Security Framework initializedAppArmor: AppArmor disabled by boottime parameterCapability LSM initializedMount-cache hash table entries: 512Hook version: 2.6.24 2008/01/25CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 00000001monitor/mwait feature present.using mwait in idle threads.CPU: L1 I cache: 32K, L1 D cache: 32KCPU: L2 cache: 4096KCPU: Physical Processor ID: 0CPU: Processor Core ID: 0CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001 00000001Intel machine check architecture supported.Intel machine check reporting enabled on CPU#0.Compat vDSO mapped to ffffe000.Checking 'hlt' instruction... OK.SMP alternatives: switching to UP codeEarly unpacking initramfs... doneFreeing initrd memory: 2703k freedACPI: Core revision 20070126ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.CPU0: Intel(R) Core(TM)2 Duo CPU     T7500  @ 2.20GHz stepping 0aSMP alternatives: switching to SMP codeBooting processor 1/1 eip 3000Initializing CPU#1Calibrating delay using timer specific routine.. 4388.79 BogoMIPS (lpj=2194399)CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 00000001monitor/mwait feature present.CPU: L1 I cache: 32K, L1 D cache: 32KCPU: L2 cache: 4096KCPU: Physical Processor ID: 0CPU: Processor Core ID: 1CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001 00000001Intel machine check architecture supported.Intel machine check reporting enabled on CPU#1.CPU1: Intel(R) Core(TM)2 Duo CPU     T7500  @ 2.20GHz stepping 0aTotal of 2 processors activated (8781.37 BogoMIPS).ENABLING IO-APIC IRQs..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1checking TSC synchronization [CPU#0 -> CPU#1]: passed.Brought up 2 CPUsnet_namespace: 64 bytesBooting paravirtualized kernel on bare hardwareNET: Registered protocol family 16ACPI: bus type pci registeredPCI: Using MMCONFIGSetting up standard PCI resourcesACPI: EC: Look up EC in DSDTACPI: BIOS _OSI(Linux) query ignored via DMIACPI: Interpreter enabledACPI: (supports S0 S3 S4 S5)ACPI: Using IOAPIC for interrupt routingACPI: EC: non-query interrupt received, switching to interrupt modeACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62ACPI: EC: driver started in interrupt modeACPI: PCI Root Bridge [PCI0] (0000:00)PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCOPCI quirk: region 1180-11bf claimed by ICH6 GPIOPCI: Transparent bridge - 0000:00:1e.0ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15)ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *7 10 12 14 15)ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10Linux Plug and Play Support v0.97 (c) Adam Belaypnp: PnP ACPI initACPI: bus type pnp registeredpnp: PnP ACPI: found 11 devicesACPI: ACPI bus type pnp unregisteredPnPBIOS: DisabledPCI: Using ACPI for IRQ routingPCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a reporthpet0: at MMIO 0xfed00000, IRQs 2, 8, 0hpet0: 3 64-bit timers, 14318180 HzTime: tsc clocksource has been installed.system 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reservedsystem 00:01: iomem range 0xfed14000-0xfed17fff could not be reservedsystem 00:01: iomem range 0xfed18000-0xfed18fff could not be reservedsystem 00:01: iomem range 0xfed19000-0xfed19fff could not be reservedsystem 00:01: iomem range 0xe0000000-0xefffffff could not be reservedsystem 00:01: iomem range 0xfed20000-0xfed3ffff could not be reservedsystem 00:01: iomem range 0xfed40000-0xfed44fff could not be reservedsystem 00:01: iomem range 0xfed45000-0xfed8ffff could not be reservedsystem 00:05: iomem range 0xfed00000-0xfed003ff could not be reservedsystem 00:07: ioport range 0x680-0x69f has been reservedsystem 00:07: ioport range 0x800-0x80f has been reservedsystem 00:07: ioport range 0x1000-0x107f has been reservedsystem 00:07: ioport range 0x1180-0x11bf has been reservedsystem 00:07: ioport range 0x1640-0x164f has been reservedsystem 00:07: ioport range 0xfe00-0xfe00 has been reservedPCI: Failed to allocate mem resource #6:20000@e0000000 for 0000:01:00.0PCI: Bridge: 0000:00:01.0  IO window: 2000-2fff  MEM window: cc000000-ceffffff  PREFETCH window: d0000000-dfffffffPCI: Bridge: 0000:00:1c.0  IO window: f000-ffff  MEM window: fb000000-fcffffff  PREFETCH window: disabled.PCI: Bridge: 0000:00:1c.2  IO window: disabled.  MEM window: f0200000-f02fffff  PREFETCH window: disabled.PCI: Bridge: 0000:00:1c.3  IO window: 3000-3fff  MEM window: f0300000-f03fffff  PREFETCH window: 88000000-880fffffPCI: Bridge: 0000:00:1c.4  IO window: 4000-4fff  MEM window: f0400000-f04fffff  PREFETCH window: disabled.PCI: Bridge: 0000:00:1e.0  IO window: disabled.  MEM window: f0500000-f05fffff  PREFETCH window: disabled.ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16PCI: Setting latency timer of device 0000:00:01.0 to 64ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17PCI: Setting latency timer of device 0000:00:1c.0 to 64ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18PCI: Setting latency timer of device 0000:00:1c.2 to 64ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19PCI: Setting latency timer of device 0000:00:1c.3 to 64ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 17PCI: Setting latency timer of device 0000:00:1c.4 to 64PCI: Setting latency timer of device 0000:00:1e.0 to 64NET: Registered protocol family 2IP route cache hash table entries: 32768 (order: 5, 131072 bytes)TCP established hash table entries: 131072 (order: 8, 1048576 bytes)TCP bind hash table entries: 65536 (order: 7, 524288 bytes)TCP: Hash tables configured (established 131072 bind 65536)TCP reno registeredSimple Boot Flag at 0x36 set to 0x1apm: BIOS not found.audit: initializing netlink socket (disabled)audit(1210094514.440:1): initializedTotal HugeTLB memory allocated, 0VFS: Disk quotas dquot_6.5.1Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)io scheduler noop registeredio scheduler anticipatory registeredio scheduler deadline registeredio scheduler cfq registered (default)Boot video device is 0000:01:00.0PCI: Setting latency timer of device 0000:00:01.0 to 64assign_interrupt_mode Found MSI capabilityAllocate Port Service[0000:00:01.0:pcie00]Allocate Port Service[0000:00:01.0:pcie02]Allocate Port Service[0000:00:01.0:pcie03]PCI: Setting latency timer of device 0000:00:1c.0 to 64assign_interrupt_mode Found MSI capabilityAllocate Port Service[0000:00:1c.0:pcie00]Allocate Port Service[0000:00:1c.0:pcie02]Allocate Port Service[0000:00:1c.0:pcie03]PCI: Setting latency timer of device 0000:00:1c.2 to 64assign_interrupt_mode Found MSI capabilityAllocate Port Service[0000:00:1c.2:pcie00]Allocate Port Service[0000:00:1c.2:pcie02]Allocate Port Service[0000:00:1c.2:pcie03]PCI: Setting latency timer of device 0000:00:1c.3 to 64assign_interrupt_mode Found MSI capabilityAllocate Port Service[0000:00:1c.3:pcie00]Allocate Port Service[0000:00:1c.3:pcie02]Allocate Port Service[0000:00:1c.3:pcie03]PCI: Setting latency timer of device 0000:00:1c.4 to 64assign_interrupt_mode Found MSI capabilityAllocate Port Service[0000:00:1c.4:pcie00]Allocate Port Service[0000:00:1c.4:pcie02]Allocate Port Service[0000:00:1c.4:pcie03]vesafb: framebuffer at 0xcd000000, mapped to 0xf8880000, using 3750k, total 14336kvesafb: mode is 800x600x16, linelength=1600, pages=2vesafb: protected mode interface info at c000:b680vesafb: pmi: set display start = c00cb6e3, set palette = c00cb73evesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da vesafb: scrolling: redrawvesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 189770 bytes,<6>...found (800x600, 189674 bytes, v3).Switched to high resolution mode on CPU 1Switched to high resolution mode on CPU 0Console: switching to colour frame buffer device 91x30fb0: VESA VGA frame buffer deviceisapnp: Scanning for PnP cards...isapnp: No Plug & Play device foundhpet_resources: 0xfed00000 is busySerial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabledRAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksizePNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12i8042.c: Detected active multiplexing controller, rev 1.1.serio: i8042 KBD port at 0x60,0x64 irq 1serio: i8042 AUX0 port at 0x60,0x64 irq 12serio: i8042 AUX1 port at 0x60,0x64 irq 12serio: i8042 AUX2 port at 0x60,0x64 irq 12serio: i8042 AUX3 port at 0x60,0x64 irq 12mice: PS/2 mouse device common for all micecpuidle: using governor laddercpuidle: using governor menuTCP cubic registeredNET: Registered protocol family 1Using IPI No-Shortcut moderegistered taskstats version 1BIOS EDD facility v0.16 2004-Jun-25, 6 devices foundFreeing unused kernel memory: 288k freedusbcore: registered new interface driver usbfsusbcore: registered new interface driver hubusbcore: registered new device driver usbACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18PCI: Setting latency timer of device 0000:00:1a.7 to 64ehci_hcd 0000:00:1a.7: EHCI Host Controllerehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1ehci_hcd 0000:00:1a.7: debug port 1PCI: cache line size of 32 is not supported by device 0000:00:1a.7ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf0604800ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004usb usb1: configuration #1 chosen from 1 choicehub 1-0:1.0: USB hub foundhub 1-0:1.0: 4 ports detectedACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 20PCI: Setting latency timer of device 0000:00:1d.7 to 64ehci_hcd 0000:00:1d.7: EHCI Host Controllerehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2ehci_hcd 0000:00:1d.7: debug port 1PCI: cache line size of 32 is not supported by device 0000:00:1d.7ehci_hcd 0000:00:1d.7: irq 20, io mem 0xf0604c00ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004usb usb2: configuration #1 chosen from 1 choicehub 2-0:1.0: USB hub foundhub 2-0:1.0: 6 ports detectedohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) DriverUSB Universal Host Controller Interface driver v3.0ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16PCI: Setting latency timer of device 0000:00:1a.0 to 64uhci_hcd 0000:00:1a.0: UHCI Host Controlleruhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800usb usb3: configuration #1 chosen from 1 choicehub 3-0:1.0: USB hub foundhub 3-0:1.0: 2 ports detectedSynaptics Touchpad, model: 1, fw: 6.2, id: 0x1a0b1, caps: 0xa04713/0x200000input: SynPS/2 Synaptics TouchPad as /class/input/input0input: AT Translated Set 2 keyboard as /class/input/input1ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21PCI: Setting latency timer of device 0000:00:1a.1 to 64uhci_hcd 0000:00:1a.1: UHCI Host Controlleruhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001820usb usb4: configuration #1 chosen from 1 choicehub 4-0:1.0: USB hub foundhub 4-0:1.0: 2 ports detectedACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 20PCI: Setting latency timer of device 0000:00:1d.0 to 64uhci_hcd 0000:00:1d.0: UHCI Host Controlleruhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5uhci_hcd 0000:00:1d.0: irq 20, io base 0x00001840usb usb5: configuration #1 chosen from 1 choicehub 5-0:1.0: USB hub foundhub 5-0:1.0: 2 ports detectedusb 3-1: new full speed USB device using uhci_hcd and address 2ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19PCI: Setting latency timer of device 0000:00:1d.1 to 64uhci_hcd 0000:00:1d.1: UHCI Host Controlleruhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001860usb 3-1: configuration #1 chosen from 1 choiceusb usb6: configuration #1 chosen from 1 choicehub 6-0:1.0: USB hub foundhub 6-0:1.0: 2 ports detectedACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18PCI: Setting latency timer of device 0000:00:1d.2 to 64uhci_hcd 0000:00:1d.2: UHCI Host Controlleruhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001880usb usb7: configuration #1 chosen from 1 choicehub 7-0:1.0: USB hub foundhub 7-0:1.0: 2 ports detectedSCSI subsystem initializedDriver 'sd' needs updating - please use bus_type methodslibata version 3.00 loaded.ahci 0000:00:1f.2: version 3.0ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA modeahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part PCI: Setting latency timer of device 0000:00:1f.2 to 64scsi0 : ahciscsi1 : ahciscsi2 : ahciata1: SATA max UDMA/133 abar m2048@0xf0604000 port 0xf0604100 irq 19ata2: SATA max UDMA/133 abar m2048@0xf0604000 port 0xf0604180 irq 19ata3: SATA max UDMA/133 abar m2048@0xf0604000 port 0xf0604200 irq 19ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)ata1.00: ATA-8: WDC WD2500BEVS-22UST0, 01.01A01, max UDMA/133ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)ata1.00: configured for UDMA/133ata2: SATA link down (SStatus 0 SControl 300)ata3: SATA link down (SStatus 0 SControl 300)scsi 0:0:0:0: Direct-Access     ATA      WDC WD2500BEVS-2 01.0 PQ: 0 ANSI: 5sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)sd 0:0:0:0: [sda] Write Protect is offsd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUAsd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)sd 0:0:0:0: [sda] Write Protect is offsd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 >sd 0:0:0:0: [sda] Attached SCSI diskata_piix 0000:00:1f.1: version 2.12ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 19 (level, low) -> IRQ 19PCI: Setting latency timer of device 0000:00:1f.1 to 64scsi3 : ata_piixscsi4 : ata_piixata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x18a0 irq 14ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18a8 irq 15ata4.00: ATAPI: TSSTcorp CDDVDW TS-L632H, fs03, max UDMA/33ata4.00: configured for UDMA/33scsi 3:0:0:0: CD-ROM            TSSTcorp CDDVDW TS-L632H  fs03 PQ: 0 ANSI: 5Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xxide0: I/O resource 0x3F6-0x3F6 not free.ide0: ports already in use, skipping probeide1: I/O resource 0x376-0x376 not free.ide1: ports already in use, skipping probeswsusp: Marking nosave pages: 000000000009f000 - 0000000000100000swsusp: Basic memory bitmaps createdswsusp: Basic memory bitmaps freedkjournald starting.  Commit interval 5 secondsEXT3-fs: mounted filesystem with ordered data mode.Not activating Mandatory Access Control now since /sbin/ccs-init doesn't exist.Bluetooth: Core ver 2.11sd 0:0:0:0: Attached scsi generic sg0 type 0scsi 3:0:0:0: Attached scsi generic sg1 type 5NET: Registered protocol family 31Bluetooth: HCI device and connection manager initializedBluetooth: HCI socket layer initializedinput: PC Speaker as /class/input/input2Driver 'sr' needs updating - please use bus_type methodssr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda trayUniform CD-ROM driver Revision: 3.20sr 3:0:0:0: Attached scsi CD-ROM sr0iTCO_vendor_support: vendor-support=0Linux agpgart interface v0.102r8169 Gigabit Ethernet driver 2.2LK loadedACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 19 (level, low) -> IRQ 19PCI: Setting latency timer of device 0000:05:00.0 to 64r8169 0000:05:00.0: no MSI. Back to INTx.eth0: RTL8168b/8111b at 0xf8e14000, 00:03:0d:7d:58:8c, XID 38000000 IRQ 19iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060)iTCO_wdt: initialized. heartbeat=30 sec (nowayout=1)rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0rtc0: alarms up to one month, y3kACPI: SSDT 7FED32F4, 02FC (r1  PmRef  Cpu0Ist     3000 INTL 20050624)ACPI: SSDT 7FED2DE9, 0486 (r1  PmRef  Cpu0Cst     3001 INTL 20050624)iwl4965: Intel(R) Wireless WiFi Link 4965AGN driver for Linux, 1.1.17kdsiwl4965: Copyright(c) 2003-2007 Intel CorporationACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 18 (level, low) -> IRQ 18PCI: Setting latency timer of device 0000:04:00.0 to 64iwl4965: Detected Intel Wireless WiFi Link 4965AGNMonitor-Mwait will be used to enter C-1 stateMonitor-Mwait will be used to enter C-2 stateMonitor-Mwait will be used to enter C-3 stateACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])ACPI: Processor [CPU0] (supports 8 throttling states)ACPI: SSDT 7FED35F0, 00C8 (r1  PmRef  Cpu1Ist     3000 INTL 20050624)ACPI: SSDT 7FED326F, 0085 (r1  PmRef  Cpu1Cst     3000 INTL 20050624)ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])ACPI: Processor [CPU1] (supports 8 throttling states)ACPI: Battery Slot [BAT0] (battery present)input: Power Button (FF) as /class/input/input3ACPI: Power Button (FF) [PWRF]input: Lid Switch as /class/input/input4ACPI: Lid Switch [LID0]input: Power Button (CM) as /class/input/input5ACPI: Thermal Zone [THRM] (47 C)ACPI: Power Button (CM) [PWRB]input: Sleep Button (CM) as /class/input/input6ACPI: Sleep Button (CM) [SLPB]ACPI: AC Adapter [AC0] (on-line)input: Video Bus as /class/input/input7ACPI: Video Device [VGA_PEGP] (multi-head: yes  rom: no  post: no)Bluetooth: HCI USB driver ver 2.9usbcore: registered new interface driver hci_usbwmi_add device=f719e800calling WQBAACPI: WMI-Acer: Mapper loadedACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 19 (level, low) -> IRQ 19PCI: Enabling device 0000:07:04.0 (0195 -> 0197)ACPI: PCI Interrupt 0000:07:04.0[A] -> GSI 20 (level, low) -> IRQ 22ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 23PCI: Setting latency timer of device 0000:00:1b.0 to 64hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[22]  MMIO=[f0501000-f05017ff]  Max Packet=[2048]  IR/IT contexts=[8/8]iwl4965: Tunable channels: 13 802.11bg, 19 802.11a channelsphy0: Selected rate control algorithm 'iwl-4965-rs'Non-volatile memory driver v1.2Linux video capture interface: v2.00usbcore: registered new interface driver gspca/var/lib/dkms/gspca/1.00.20-2mdv2008.1/build/gspca_core.c: gspca driver 01.00.20 registeredClocksource tsc unstable (delta = -42977646757 ns)Time: hpet clocksource has been installed.ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00030d0055033aeb]floppy0: no floppy controllers foundvboxadd: VirtualBox PCI device not found.vboxadd: VirtualBox PCI device not found.vboxvfs: Unknown symbol vboxadd_cmc_openvboxvfs: Unknown symbol vboxadd_cmc_ctl_guest_filter_maskvboxvfs: Unknown symbol vboxadd_cmc_callvboxvfs: Unknown symbol vboxadd_cmc_closesata_sil24 0000:06:00.0: version 1.1ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 16 (level, low) -> IRQ 16PCI: Setting latency timer of device 0000:06:00.0 to 64scsi5 : sata_sil24ata6: SATA max UDMA/100 host m128@0xf0402000 port 0xf0400000 irq 16ata6: SATA link down (SStatus 0 SControl 0)device-mapper: uevent: version 1.0.3device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.comloop: module loadedEXT3 FS on sda6, internal journalkjournald starting.  Commit interval 5 secondsEXT3 FS on sda8, internal journalEXT3-fs: mounted filesystem with ordered data mode.fuse init (API version 7.9)Adding 4088500k swap on /dev/sda7.  Priority:-1 extents:1 across:4088500knf_conntrack version 0.5.0 (14336 buckets, 57344 max)NET: Registered protocol family 10lo: Disabled Privacy ExtensionsNET: Registered protocol family 17r8169: eth0: link downADDRCONF(NETDEV_UP): eth0: link is not readyADDRCONF(NETDEV_UP): wlan0: link is not readyip_tables: (C) 2000-2006 Netfilter Core Teamusbcore: registered new interface driver usblpwlan0: Initial auth_alg=0wlan0: authenticate with AP 00:0c:f6:19:9b:25wlan0: RX authentication from 00:0c:f6:19:9b:25 (alg=0 transaction=2 status=0)wlan0: authenticatedwlan0: associate with AP 00:0c:f6:19:9b:25wlan0: RX AssocResp from 00:0c:f6:19:9b:25 (capab=0x421 status=0 aid=1)wlan0: associatedwlan0: switched to short barker preamble (BSSID=00:0c:f6:19:9b:25)ADDRCONF(NETDEV_CHANGE): wlan0: link becomes readyBluetooth: L2CAP ver 2.9Bluetooth: L2CAP socket layer initializedBluetooth: RFCOMM socket layer initializedBluetooth: RFCOMM TTY layer initializedBluetooth: RFCOMM ver 1.8Netfilter messages via NETLINK v0.30.nf_conntrack version 0.5.0 (14336 buckets, 57344 max)ip6_tables: (C) 2000-2006 Netfilter Core Teamctnetlink v0.93: registering with nfnetlink.ClusterIP Version 0.8 loaded successfullynvidia: module license 'NVIDIA' taints kernel.ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16PCI: Setting latency timer of device 0000:01:00.0 to 64NVRM: loading NVIDIA UNIX x86 Kernel Module  169.12  Thu Feb 14 17:53:07 PST 2008netfilter PSD loaded - (c) astaro AGIFWLOG: register targetbootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 14966 bytes, v3).bootsplash: status on console 0 changed to onbootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 14966 bytes, v3).bootsplash: status on console 1 changed to onbootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 14966 bytes, v3).bootsplash: status on console 2 changed to onbootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 14966 bytes, v3).bootsplash: status on console 3 changed to onbootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 14966 bytes, v3).bootsplash: status on console 4 changed to onbootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 14966 bytes, v3).bootsplash: status on console 5 changed to onwlan0: no IPv6 routers presentusb 5-1: new full speed USB device using uhci_hcd and address 2usb 5-1: configuration #1 chosen from 1 choice/var/lib/dkms/gspca/1.00.20-2mdv2008.1/build/gspca_core.c: USB GSPCA camera found.(ZC3XX) /var/lib/dkms/gspca/1.00.20-2mdv2008.1/build/gspca_core.c: [spca5xx_probe:4283] Camera type JPEG zc0301: V4L2 driver for ZC0301[P] Image Processor and Control Chip v1:1.10/var/lib/dkms/gspca/1.00.20-2mdv2008.1/build/Vimicro/zc3xx.h: [zc3xx_config:654] Find Sensor PAS202BCB/var/lib/dkms/gspca/1.00.20-2mdv2008.1/build/gspca_core.c: [spca5xx_getcapability:1256] maxw 640 maxh 480 minw 160 minh 120usbcore: registered new interface driver zc0301/var/lib/dkms/gspca/1.00.20-2mdv2008.1/build/gspca_core.c: [spca5xx_set_light_freq:1940] Sensor currently not support light frequency banding filters./var/lib/dkms/gspca/1.00.20-2mdv2008.1/build/gspca_core.c: [gspca_set_isoc_ep:952] ISO EndPoint found 0x81 AlternateSet 7/var/lib/dkms/gspca/1.00.20-2mdv2008.1/build/gspca_core.c: [spca5xx_set_light_freq:1940] Sensor currently not support light frequency banding filters./var/lib/dkms/gspca/1.00.20-2mdv2008.1/build/gspca_core.c: [gspca_set_isoc_ep:952] ISO EndPoint found 0x81 AlternateSet 7/var/lib/dkms/gspca/1.00.20-2mdv2008.1/build/gspca_core.c: [spca5xx_set_light_freq:1940] Sensor currently not support light frequency banding filters./var/lib/dkms/gspca/1.00.20-2mdv2008.1/build/gspca_core.c: [gspca_set_isoc_ep:952] ISO EndPoint found 0x81 AlternateSet 7/var/lib/dkms/gspca/1.00.20-2mdv2008.1/build/gspca_core.c: [spca5xx_set_light_freq:1940] Sensor currently not support light frequency banding filters./var/lib/dkms/gspca/1.00.20-2mdv2008.1/build/gspca_core.c: [gspca_set_isoc_ep:952] ISO EndPoint found 0x81 AlternateSet 7/var/lib/dkms/gspca/1.00.20-2mdv2008.1/build/gspca_core.c: [spca5xx_set_light_freq:1940] Sensor currently not support light frequency banding filters./var/lib/dkms/gspca/1.00.20-2mdv2008.1/build/gspca_core.c: [gspca_set_isoc_ep:952] ISO EndPoint found 0x81 AlternateSet 7/var/lib/dkms/gspca/1.00.20-2mdv2008.1/build/gspca_core.c: [spca5xx_set_light_freq:1940] Sensor currently not support light frequency banding filters./var/lib/dkms/gspca/1.00.20-2mdv2008.1/build/gspca_core.c: [gspca_set_isoc_ep:952] ISO EndPoint found 0x81 AlternateSet 7/var/lib/dkms/gspca/1.00.20-2mdv2008.1/build/gspca_core.c: [spca5xx_set_light_freq:1940] Sensor currently not support light frequency banding filters./var/lib/dkms/gspca/1.00.20-2mdv2008.1/build/gspca_core.c: [gspca_set_isoc_ep:952] ISO EndPoint found 0x81 AlternateSet 7/var/lib/dkms/gspca/1.00.20-2mdv2008.1/build/gspca_core.c: [spca5xx_set_light_freq:1940] Sensor currently not support light frequency banding filters./var/lib/dkms/gspca/1.00.20-2mdv2008.1/build/gspca_core.c: [gspca_set_isoc_ep:952] ISO EndPoint found 0x81 AlternateSet 7/var/lib/dkms/gspca/1.00.20-2mdv2008.1/build/gspca_core.c: [spca5xx_set_light_freq:1940] Sensor currently not support light frequency banding filters./var/lib/dkms/gspca/1.00.20-2mdv2008.1/build/gspca_core.c: [gspca_set_isoc_ep:952] ISO EndPoint found 0x81 AlternateSet 7/var/lib/dkms/gspca/1.00.20-2mdv2008.1/build/gspca_core.c: [spca5xx_set_light_freq:1940] Sensor currently not support light frequency banding filters./var/lib/dkms/gspca/1.00.20-2mdv2008.1/build/gspca_core.c: [gspca_set_isoc_ep:952] ISO EndPoint found 0x81 AlternateSet 7/var/lib/dkms/gspca/1.00.20-2mdv2008.1/build/gspca_core.c: [spca5xx_set_light_freq:1940] Sensor currently not support light frequency banding filters./var/lib/dkms/gspca/1.00.20-2mdv2008.1/build/gspca_core.c: [gspca_set_isoc_ep:952] ISO EndPoint found 0x81 AlternateSet 7/var/lib/dkms/gspca/1.00.20-2mdv2008.1/build/gspca_core.c: [spca5xx_do_ioctl:2132] Bridge ZC301-2 /var/lib/dkms/gspca/1.00.20-2mdv2008.1/build/gspca_core.c: [spca5xx_do_ioctl:2132] Bridge ZC301-2 /var/lib/dkms/gspca/1.00.20-2mdv2008.1/build/gspca_core.c: [spca5xx_do_ioctl:2132] Bridge ZC301-2 /var/lib/dkms/gspca/1.00.20-2mdv2008.1/build/gspca_core.c: [spca5xx_do_ioctl:2132] Bridge ZC301-2 /var/lib/dkms/gspca/1.00.20-2mdv2008.1/build/gspca_core.c: [gspca_set_isoc_ep:952] ISO EndPoint found 0x81 AlternateSet 7