Part of Slepp's Projects — Pastebin — TURL — Imagebin — Filebin
Feedback -- English French German Japanese
Create Upload Newest Tools Donate

Paste Actions

Download Raw
Embed
Post to Twitter
Remove Paste

Paste Details

Raw format, 10 years 4 months old.

Advertising

Untitled
Wednesday, August 15th, 2007 at 9:45:06am UTC 

  1. dmesg:
  2. [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
  3. [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
  4. [    0.000000] ACPI: IRQ0 used by override.
  5. [    0.000000] ACPI: IRQ2 used by override.
  6. [    0.000000] ACPI: IRQ9 used by override.
  7. [    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
  8. [    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
  9. [    0.000000] Using ACPI (MADT) for SMP configuration information
  10. [    0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
  11. [    0.000000] Detected 1662.674 MHz processor.
  12. [   12.062002] Built 1 zonelists.  Total pages: 257668
  13. [   12.062007] Kernel command line: root=UUID=90babd02-7857-4d92-958f-c32e413f4431 ro quiet splash locale=pl_PL
  14. [   12.062283] mapped APIC to ffffd000 (fee00000)
  15. [   12.062287] mapped IOAPIC to ffffc000 (fec00000)
  16. [   12.062293] Enabling fast FPU save and restore... done.
  17. [   12.062297] Enabling unmasked SIMD FPU exception support... done.
  18. [   12.062307] Initializing CPU#0
  19. [   12.062390] PID hash table entries: 4096 (order: 12, 16384 bytes)
  20. [   12.064089] Console: colour VGA+ 80x25
  21. [   12.064370] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  22. [   12.064903] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  23. [   12.110273] Memory: 1018592k/1038784k available (1992k kernel code, 19448k reserved, 900k data, 328k init, 121280k highmem)
  24. [   12.110288] virtual kernel memory layout:
  25. [   12.110290]     fixmap  : 0xfff4e000 - 0xfffff000   ( 708 kB)
  26. [   12.110292]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
  27. [   12.110295]     vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
  28. [   12.110297]     lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
  29. [   12.110299]       .init : 0xc03d9000 - 0xc042b000   ( 328 kB)
  30. [   12.110301]       .data : 0xc02f2374 - 0xc03d36d4   ( 900 kB)
  31. [   12.110303]       .text : 0xc0100000 - 0xc02f2374   (1992 kB)
  32. [   12.110309] Checking if this processor honours the WP bit even in supervisor mode... Ok.
  33. [   12.110528] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
  34. [   12.110536] hpet0: 3 64-bit timers, 14318180 Hz
  35. [   12.111543] Using HPET for base-timer
  36. [   12.190411] Calibrating delay using timer specific routine.. 3329.33 BogoMIPS (lpj=6658677)
  37. [   12.190472] Security Framework v1.0.0 initialized
  38. [   12.190481] SELinux:  Disabled at boot.
  39. [   12.190506] Mount-cache hash table entries: 512
  40. [   12.190690] CPU: After generic identify, caps: bfe9fbff 00000000 00000000 00000000 0000c1a9 00000000 00000000
  41. [   12.190703] monitor/mwait feature present.
  42. [   12.190706] using mwait in idle threads.
  43. [   12.190712] CPU: L1 I cache: 32K, L1 D cache: 32K
  44. [   12.190716] CPU: L2 cache: 2048K
  45. [   12.190720] CPU: Physical Processor ID: 0
  46. [   12.190723] CPU: Processor Core ID: 0
  47. [   12.190727] CPU: After all inits, caps: bfe9fbff 00000000 00000000 00002940 0000c1a9 00000000 00000000
  48. [   12.190742] Compat vDSO mapped to ffffe000.
  49. [   12.190747] Remapping vsyscall page to ffffe000
  50. [   12.190765] Checking 'hlt' instruction... OK.
  51. [   12.206541] SMP alternatives: switching to UP code
  52. [   12.207071] Early unpacking initramfs... done
  53. [   12.772276] ACPI: Core revision 20060707
  54. [   12.772604] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT.
  55. [   12.835280] CPU0: Intel Genuine Intel(R) CPU           T2300  @ 1.66GHz stepping 08
  56. [   12.835308] SMP alternatives: switching to SMP code
  57. [   12.835457] Booting processor 1/1 eip 3000
  58. [   12.846036] Initializing CPU#1
  59. [   12.925288] Calibrating delay using timer specific routine.. 3325.14 BogoMIPS (lpj=6650287)
  60. [   12.925300] CPU: After generic identify, caps: bfe9fbff 00000000 00000000 00000000 0000c1a9 00000000 00000000
  61. [   12.925308] monitor/mwait feature present.
  62. [   12.925314] CPU: L1 I cache: 32K, L1 D cache: 32K
  63. [   12.925317] CPU: L2 cache: 2048K
  64. [   12.925321] CPU: Physical Processor ID: 0
  65. [   12.925323] CPU: Processor Core ID: 1
  66. [   12.925326] CPU: After all inits, caps: bfe9fbff 00000000 00000000 00002940 0000c1a9 00000000 00000000
  67. [   12.926066] CPU1: Intel Genuine Intel(R) CPU           T2300  @ 1.66GHz stepping 08
  68. [   12.926100] Total of 2 processors activated (6654.48 BogoMIPS).
  69. [   12.926302] ENABLING IO-APIC IRQs
  70. [   12.926535] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
  71. [   13.073062] checking TSC synchronization across 2 CPUs: passed.
  72. [    0.004000] Brought up 2 CPUs
  73. [    0.201423] migration_cost=53
  74. [    0.201846] Booting paravirtualized kernel on bare hardware
  75. [    0.201968] Time:  9:21:14  Date: 07/15/107
  76. [    0.202012] NET: Registered protocol family 16
  77. [    0.202142] EISA bus registered
  78. [    0.202153] ACPI: bus type pci registered
  79. [    0.202315] PCI: PCI BIOS revision 2.10 entry at 0xfd604, last bus=7
  80. [    0.202319] PCI: Using configuration type 1
  81. [    0.202323] Setting up standard PCI resources
  82. [    0.209964] ACPI: Interpreter enabled
  83. [    0.209968] ACPI: Using IOAPIC for interrupt routing
  84. [    0.214120] ACPI: PCI Root Bridge [PCI0] (0000:00)
  85. [    0.214128] PCI: Probing PCI hardware (bus 00)
  86. [    0.217040] Boot video device is 0000:00:02.0
  87. [    0.217799] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
  88. [    0.217806] PCI quirk: region 1180-11bf claimed by ICH6 GPIO
  89. [    0.218850] PCI: Firmware left 0000:07:08.0 e100 interrupts enabled, disabling
  90. [    0.218959] PCI: Transparent bridge - 0000:00:1e.0
  91. [    0.219056] PCI: Bus #08 (-#0b) is hidden behind transparent bridge #07 (-#07) (try 'pci=assign-busses')
  92. [    0.219061] Please report the result to linux-kernel to fix this permanently
  93. [    0.219144] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
  94. [    0.385023] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
  95. [    0.385494] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
  96. [    0.385960] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
  97. [    0.388131] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
  98. [    0.420121] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
  99. [    0.420580] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
  100. [    0.421034] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
  101. [    0.421491] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
  102. [    0.421946] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 *10 12 14 15)
  103. [    0.422398] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
  104. [    0.422856] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
  105. [    0.423313] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
  106. [    0.531768] ACPI: Power Resource [FN00] (off)
  107. [    0.532018] Linux Plug and Play Support v0.97 (c) Adam Belay
  108. [    0.532031] pnp: PnP ACPI init
  109. [    0.627369] pnp: PnP ACPI: found 10 devices
  110. [    0.627376] PnPBIOS: Disabled by ACPI PNP
  111. [    0.627440] PCI: Using ACPI for IRQ routing
  112. [    0.627445] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
  113. [    0.653922] NET: Registered protocol family 8
  114. [    0.653926] NET: Registered protocol family 20
  115. [    0.654794] PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
  116. [    0.654803] PCI: Bridge: 0000:00:1c.0
  117. [    0.654806]   IO window: disabled.
  118. [    0.654813]   MEM window: disabled.
  119. [    0.654819]   PREFETCH window: disabled.
  120. [    0.654826] PCI: Bridge: 0000:00:1c.1
  121. [    0.654831]   IO window: 2000-2fff
  122. [    0.654839]   MEM window: f0700000-f07fffff
  123. [    0.654846]   PREFETCH window: f0200000-f03fffff
  124. [    0.654854] PCI: Bridge: 0000:00:1c.2
  125. [    0.654859]   IO window: 3000-3fff
  126. [    0.654867]   MEM window: f0800000-f08fffff
  127. [    0.654874]   PREFETCH window: f0400000-f05fffff
  128. [    0.654891] PCI: Bus 8, cardbus bridge: 0000:07:06.0
  129. [    0.654895]   IO window: 00004400-000044ff
  130. [    0.654903]   IO window: 00004800-000048ff
  131. [    0.654911]   PREFETCH window: 50000000-53ffffff
  132. [    0.654918]   MEM window: 54000000-57ffffff
  133. [    0.654925] PCI: Bridge: 0000:00:1e.0
  134. [    0.654930]   IO window: 4000-4fff
  135. [    0.654938]   MEM window: f0900000-f09fffff
  136. [    0.654945]   PREFETCH window: 50000000-53ffffff
  137. [    0.654985] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 16
  138. [    0.655000] PCI: Setting latency timer of device 0000:00:1c.0 to 64
  139. [    0.655030] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 17
  140. [    0.655039] PCI: Setting latency timer of device 0000:00:1c.1 to 64
  141. [    0.655068] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
  142. [    0.655077] PCI: Setting latency timer of device 0000:00:1c.2 to 64
  143. [    0.655095] PCI: Setting latency timer of device 0000:00:1e.0 to 64
  144. [    0.655116] PCI: Enabling device 0000:07:06.0 (0000 -> 0003)
  145. [    0.655122] ACPI: PCI Interrupt 0000:07:06.0[A] -> GSI 18 (level, low) -> IRQ 18
  146. [    0.655169] NET: Registered protocol family 2
  147. [    0.710973] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
  148. [    0.711122] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
  149. [    0.712354] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
  150. [    0.712980] TCP: Hash tables configured (established 131072 bind 65536)
  151. [    0.712985] TCP reno registered
  152. [    0.727072] checking if image is initramfs... it is
  153. [    1.831742] Freeing initrd memory: 6788k freed
  154. [    1.831987] Simple Boot Flag at 0x36 set to 0x1
  155. [    1.832690] audit: initializing netlink socket (disabled)
  156. [    1.832712] audit(1187169675.820:1): initialized
  157. [    1.832854] highmem bounce pool size: 64 pages
  158. [    1.832992] VFS: Disk quotas dquot_6.5.1
  159. [    1.833022] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  160. [    1.833091] io scheduler noop registered
  161. [    1.833095] io scheduler anticipatory registered
  162. [    1.833099] io scheduler deadline registered
  163. [    1.833118] io scheduler cfq registered (default)
  164. [    1.833463] PCI: Setting latency timer of device 0000:00:1c.0 to 64
  165. [    1.833532] assign_interrupt_mode Found MSI capability
  166. [    1.833538] Allocate Port Service[0000:00:1c.0:pcie00]
  167. [    1.833592] Allocate Port Service[0000:00:1c.0:pcie02]
  168. [    1.833755] PCI: Setting latency timer of device 0000:00:1c.1 to 64
  169. [    1.833823] assign_interrupt_mode Found MSI capability
  170. [    1.833827] Allocate Port Service[0000:00:1c.1:pcie00]
  171. [    1.833883] Allocate Port Service[0000:00:1c.1:pcie02]
  172. [    1.834039] PCI: Setting latency timer of device 0000:00:1c.2 to 64
  173. [    1.834107] assign_interrupt_mode Found MSI capability
  174. [    1.834111] Allocate Port Service[0000:00:1c.2:pcie00]
  175. [    1.834164] Allocate Port Service[0000:00:1c.2:pcie02]
  176. [    1.834413] isapnp: Scanning for PnP cards...
  177. [    2.188036] isapnp: No Plug & Play device found
  178. [    2.226084] Real Time Clock Driver v1.12ac
  179. [    2.226183] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
  180. [    2.227179] mice: PS/2 mouse device common for all mice
  181. [    2.228069] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
  182. [    2.228293] input: Macintosh mouse button emulation as /class/input/input0
  183. [    2.228353] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
  184. [    2.228359] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
  185. [    2.228981] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
  186. [    2.231829] i8042.c: Detected active multiplexing controller, rev 1.1.
  187. [    2.233328] serio: i8042 KBD port at 0x60,0x64 irq 1
  188. [    2.233335] serio: i8042 AUX0 port at 0x60,0x64 irq 12
  189. [    2.233340] serio: i8042 AUX1 port at 0x60,0x64 irq 12
  190. [    2.233344] serio: i8042 AUX2 port at 0x60,0x64 irq 12
  191. [    2.233348] serio: i8042 AUX3 port at 0x60,0x64 irq 12
  192. [    2.233490] EISA: Probing bus 0 at eisa.0
  193. [    2.233500] Cannot allocate resource for EISA slot 1
  194. [    2.233506] Cannot allocate resource for EISA slot 2
  195. [    2.233510] Cannot allocate resource for EISA slot 3
  196. [    2.233514] Cannot allocate resource for EISA slot 4
  197. [    2.233538] EISA: Detected 0 cards.
  198. [    2.263636] TCP cubic registered
  199. [    2.263651] NET: Registered protocol family 1
  200. [    2.263685] Starting balanced_irq
  201. [    2.263694] Using IPI No-Shortcut mode
  202. [    2.263839] ACPI: (supports S0 S3 S4 S5)
  203. [    2.263914]   Magic number: 3:913:373
  204. [    2.264238] Freeing unused kernel memory: 328k freed
  205. [    2.264546] Time: tsc clocksource has been installed.
  206. [    2.268726] input: AT Translated Set 2 keyboard as /class/input/input1
  207. [    3.618225] Capability LSM initialized
  208. [    3.673296] ACPI: Transitioning device [FAN0] to D3
  209. [    3.673301] ACPI: Transitioning device [FAN0] to D3
  210. [    3.673307] ACPI: Fan [FAN0] (off)
  211. [    3.680378] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu0Ist] [20060707]
  212. [    3.680841] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu0Cst] [20060707]
  213. [    3.681841] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
  214. [    3.681850] ACPI: Processor [CPU0] (supports 8 throttling states)
  215. [    3.682769] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu1Ist] [20060707]
  216. [    3.683147] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu1Cst] [20060707]
  217. [    3.684228] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
  218. [    3.684237] ACPI: Processor [CPU1] (supports 8 throttling states)
  219. [    4.492000] ACPI: Thermal Zone [TZ00] (33 C)
  220. [    4.496000] ACPI: Invalid passive threshold
  221. [    4.496000] ACPI: Transitioning device [FAN0] to D0
  222. [    4.496000] ACPI: Transitioning device [FAN0] to D0
  223. [    4.496000] ACPI: Unable to turn cooling device [df80dfcc] 'on'
  224. [    4.496000] ACPI: Thermal Zone [TZ01] (29 C)
  225. [    4.500000] Time: hpet clocksource has been installed.
  226. [    5.020000] usbcore: registered new interface driver usbfs
  227. [    5.020000] usbcore: registered new interface driver hub
  228. [    5.020000] usbcore: registered new device driver usb
  229. [    5.020000] USB Universal Host Controller Interface driver v3.0
  230. [    5.020000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 19
  231. [    5.020000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
  232. [    5.020000] uhci_hcd 0000:00:1d.0: UHCI Host Controller
  233. [    5.020000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
  234. [    5.020000] uhci_hcd 0000:00:1d.0: irq 19, io base 0x00001820
  235. [    5.020000] usb usb1: configuration #1 chosen from 1 choice
  236. [    5.020000] hub 1-0:1.0: USB hub found
  237. [    5.020000] hub 1-0:1.0: 2 ports detected
  238. [    5.124000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 20
  239. [    5.124000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
  240. [    5.124000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
  241. [    5.124000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
  242. [    5.124000] uhci_hcd 0000:00:1d.1: irq 20, io base 0x00001840
  243. [    5.124000] usb usb2: configuration #1 chosen from 1 choice
  244. [    5.124000] hub 2-0:1.0: USB hub found
  245. [    5.124000] hub 2-0:1.0: 2 ports detected
  246. [    5.156000] e100: Intel(R) PRO/100 Network Driver, 3.5.17-k2-NAPI
  247. [    5.156000] e100: Copyright(c) 1999-2006 Intel Corporation
  248. [    5.204000] ieee1394: Initialized config rom entry `ip1394'
  249. [    5.228000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
  250. [    5.228000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
  251. [    5.228000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
  252. [    5.228000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
  253. [    5.228000] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
  254. [    5.228000] usb usb3: configuration #1 chosen from 1 choice
  255. [    5.228000] hub 3-0:1.0: USB hub found
  256. [    5.228000] hub 3-0:1.0: 2 ports detected
  257. [    5.332000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 17
  258. [    5.332000] PCI: Setting latency timer of device 0000:00:1d.3 to 64
  259. [    5.332000] uhci_hcd 0000:00:1d.3: UHCI Host Controller
  260. [    5.332000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
  261. [    5.332000] uhci_hcd 0000:00:1d.3: irq 17, io base 0x00001880
  262. [    5.332000] usb usb4: configuration #1 chosen from 1 choice
  263. [    5.332000] hub 4-0:1.0: USB hub found
  264. [    5.332000] hub 4-0:1.0: 2 ports detected
  265. [    5.436000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 19
  266. [    5.436000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
  267. [    5.436000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
  268. [    5.436000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
  269. [    5.436000] ehci_hcd 0000:00:1d.7: debug port 1
  270. [    5.436000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
  271. [    5.436000] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xf0d44000
  272. [    5.440000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
  273. [    5.440000] usb usb5: configuration #1 chosen from 1 choice
  274. [    5.440000] hub 5-0:1.0: USB hub found
  275. [    5.440000] hub 5-0:1.0: 8 ports detected
  276. [    5.468000] usb 2-1: new low speed USB device using uhci_hcd and address 2
  277. [    5.552000] SCSI subsystem initialized
  278. [    5.564000] libata version 2.20 loaded.
  279. [    5.568000] ata_piix 0000:00:1f.2: version 2.10ac1
  280. [    5.568000] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
  281. [    5.724000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 20
  282. [    5.724000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
  283. [    5.724000] ata1: SATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x000118b0 irq 14
  284. [    5.724000] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x000118b8 irq 15
  285. [    5.724000] scsi0 : ata_piix
  286. [    5.888000] ata1.00: ata_hpa_resize 1: sectors = 195371568, hpa_sectors = 195371568
  287. [    5.888000] ata1.00: ATA-6: TOSHIBA MK1032GSX, AS022M, max UDMA/100
  288. [    5.888000] ata1.00: 195371568 sectors, multi 16: LBA48 NCQ (depth 0/32)
  289. [    5.896000] ata1.00: ata_hpa_resize 1: sectors = 195371568, hpa_sectors = 195371568
  290. [    5.896000] ata1.00: configured for UDMA/100
  291. [    5.896000] scsi1 : ata_piix
  292. [    5.972000] usb 2-1: new low speed USB device using uhci_hcd and address 3
  293. [    6.168000] usb 2-1: configuration #1 chosen from 1 choice
  294. [    6.196000] usbcore: registered new interface driver hiddev
  295. [    6.216000] ata2.00: ATAPI, max UDMA/33
  296. [    6.236000] input: HID 1241:1166 as /class/input/input2
  297. [    6.236000] input: USB HID v1.10 Mouse [HID 1241:1166] on usb-0000:00:1d.1-1
  298. [    6.236000] usbcore: registered new interface driver usbhid
  299. [    6.236000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
  300. [    6.380000] ata2.00: configured for UDMA/33
  301. [    6.380000] scsi 0:0:0:0: Direct-Access     ATA      TOSHIBA MK1032GS AS02 PQ: 0 ANSI: 5
  302. [    6.380000] scsi 1:0:0:0: CD-ROM            MATSHITA DVD-RAM UJ-850S  1.10 PQ: 0 ANSI: 5
  303. [    6.380000] ACPI: PCI Interrupt 0000:07:08.0[A] -> GSI 20 (level, low) -> IRQ 21
  304. [    6.408000] e100: eth0: e100_probe: addr 0xf0905000, irq 21, MAC addr 00:A0:D1:6C:23:DF
  305. [    6.408000] ACPI: PCI Interrupt 0000:07:06.1[B] -> GSI 17 (level, low) -> IRQ 16
  306. [    6.460000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16]  MMIO=[f0906000-f09067ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
  307. [    6.464000] SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB)
  308. [    6.464000] sda: Write Protect is off
  309. [    6.464000] sda: Mode Sense: 00 3a 00 00
  310. [    6.464000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  311. [    6.464000] SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB)
  312. [    6.464000] sda: Write Protect is off
  313. [    6.464000] sda: Mode Sense: 00 3a 00 00
  314. [    6.464000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  315. [    6.464000]  sda:sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
  316. [    6.468000] Uniform CD-ROM driver Revision: 3.20
  317. [    6.468000] sr 1:0:0:0: Attached scsi CD-ROM sr0
  318. [    6.476000] sd 0:0:0:0: Attached scsi generic sg0 type 0
  319. [    6.476000] sr 1:0:0:0: Attached scsi generic sg1 type 5
  320. [    6.492000]  sda1 sda2 sda3
  321. [    6.492000] sd 0:0:0:0: Attached scsi disk sda
  322. [    6.808000] Attempting manual resume
  323. [    6.808000] swsusp: Resume From Partition 8:1
  324. [    6.808000] PM: Checking swsusp image.
  325. [    6.808000] PM: Resume from disk failed.
  326. [    6.848000] kjournald starting.  Commit interval 5 seconds
  327. [    6.848000] EXT3-fs: mounted filesystem with ordered data mode.
  328. [   16.448000] e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
  329. [   16.648000] NET: Registered protocol family 10
  330. [   16.648000] lo: Disabled Privacy Extensions
  331. [   17.708000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
  332. [   17.712000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
  333. [   17.788000] Linux agpgart interface v0.102 (c) Dave Jones
  334. [   17.844000] agpgart: Detected an Intel 945GM Chipset.
  335. [   17.844000] agpgart: Detected 7932K stolen memory.
  336. [   17.864000] agpgart: AGP aperture is 256M @ 0xd0000000
  337. [   18.196000] ath_hal: module license 'Proprietary' taints kernel.
  338. [   18.200000] intel_rng: FWH not detected
  339. [   18.200000] ath_hal: 0.9.18.0 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
  340. [   18.500000] wlan: 0.8.4.2 (0.9.3.1)
  341. [   18.552000] ath_pci: 0.9.4.5 (0.9.3.1)
  342. [   18.552000] ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 18 (level, low) -> IRQ 18
  343. [   18.552000] PCI: Setting latency timer of device 0000:05:00.0 to 64
  344. [   19.060000] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x25a0b1, caps: 0xa04713/0x0
  345. [   19.060000] synaptics: Toshiba Satellite A100 detected, limiting rate to 40pps.
  346. [   19.096000] input: SynPS/2 Synaptics TouchPad as /class/input/input3
  347. [   19.156000] iTCO_vendor_support: vendor-support=0
  348. [   19.220000] ath_rate_sample: 1.2 (0.9.3.1)
  349. [   19.220000] wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
  350. [   19.220000] wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
  351. [   19.220000] wifi0: H/W encryption support: WEP AES AES_CCM TKIP
  352. [   19.220000] wifi0: mac 10.0 phy 6.1 radio 10.2
  353. [   19.220000] wifi0: Use hw queue 1 for WME_AC_BE traffic
  354. [   19.220000] wifi0: Use hw queue 0 for WME_AC_BK traffic
  355. [   19.220000] wifi0: Use hw queue 2 for WME_AC_VI traffic
  356. [   19.220000] wifi0: Use hw queue 3 for WME_AC_VO traffic
  357. [   19.220000] wifi0: Use hw queue 8 for CAB traffic
  358. [   19.220000] wifi0: Use hw queue 9 for beacons
  359. [   19.244000] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (11-Nov-2006)
  360. [   19.244000] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060)
  361. [   19.244000] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
  362. [   19.268000] sdhci: Secure Digital Host Controller Interface driver
  363. [   19.268000] sdhci: Copyright(c) Pierre Ossman
  364. [   19.284000] wifi0: Atheros 5424/2424: mem=0xf0800000, irq=18
  365. [   19.284000] Yenta: CardBus bridge found at 0000:07:06.0 [1179:ff10]
  366. [   19.284000] Yenta: Enabling burst memory read transactions
  367. [   19.284000] Yenta: Using CSCINT to route CSC interrupts to PCI
  368. [   19.284000] Yenta: Routing CardBus interrupts to PCI
  369. [   19.284000] Yenta TI: socket 0000:07:06.0, mfunc 0x01a01b22, devctl 0x66
  370. [   19.520000] Yenta: ISA IRQ mask 0x0cf8, PCI irq 18
  371. [   19.520000] Socket status: 30000006
  372. [   19.520000] Yenta: Raising subordinate bus# of parent bus (#07) from #07 to #0b
  373. [   19.520000] pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff
  374. [   19.520000] cs: IO port probe 0x4000-0x4fff: clean.
  375. [   19.520000] pcmcia: parent PCI bridge Memory window: 0xf0900000 - 0xf09fffff
  376. [   19.520000] pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x53ffffff
  377. [   19.528000] ACPI: PCI Interrupt 0000:07:06.2[A] -> GSI 18 (level, low) -> IRQ 18
  378. [   19.536000] sdhci: SDHCI controller found at 0000:07:06.3 [104c:803c] (rev 0)
  379. [   19.536000] ACPI: PCI Interrupt 0000:07:06.3[A] -> GSI 18 (level, low) -> IRQ 18
  380. [   19.536000] mmc0: SDHCI at 0xf0906800 irq 18 DMA
  381. [   19.676000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
  382. [   19.676000] PCI: Setting latency timer of device 0000:00:1b.0 to 64
  383. [   19.936000] cs: IO port probe 0x100-0x3af: clean.
  384. [   19.944000] cs: IO port probe 0x3e0-0x4ff: excluding 0x400-0x407 0x4d0-0x4d7
  385. [   19.944000] cs: IO port probe 0x820-0x8ff: clean.
  386. [   19.944000] cs: IO port probe 0xc00-0xcf7: clean.
  387. [   19.944000] cs: IO port probe 0xa00-0xaff: clean.
  388. [   20.288000] fuse init (API version 7.8)
  389. [   20.360000] lp: driver loaded but no devices found
  390. [   20.416000] Adding 995988k swap on /dev/disk/by-uuid/bf391853-0764-4baa-8642-c29481afe7cf.  Priority:-1 extents:1 across:995988k
  391. [   20.588000] EXT3 FS on sda2, internal journal
  392. [   20.712000] NET: Registered protocol family 17
  393. [   20.916000] kjournald starting.  Commit interval 5 seconds
  394. [   20.916000] EXT3 FS on sda3, internal journal
  395. [   20.916000] EXT3-fs: mounted filesystem with ordered data mode.
  396. [   25.540000] Using specific hotkey driver
  397. [   25.584000] input: Power Button (FF) as /class/input/input4
  398. [   25.584000] ACPI: Power Button (FF) [PWRF]
  399. [   25.584000] input: Lid Switch as /class/input/input5
  400. [   25.584000] ACPI: Lid Switch [LID]
  401. [   25.584000] input: Power Button (CM) as /class/input/input6
  402. [   25.584000] ACPI: Power Button (CM) [PWRB]
  403. [   25.700000] ACPI: AC Adapter [ADP0] (off-line)
  404. [   25.828000] ACPI: ACPI Dock Station Driver
  405. [   25.900000] ibm_acpi: ec object not found
  406. [   25.988000] ACPI: Battery Slot [BAT0] (battery present)
  407. [   26.004000] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
  408. [   26.004000] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
  409. [   26.196000] pcc_acpi: loading...
  410. [   26.828000] eth0: no IPv6 routers present
  411. [   30.536000] ath0: no IPv6 routers present
  412. [   40.404000] ppdev: user-space parallel port driver
  413. [   42.284000] [drm] Initialized drm 1.1.0 20060810
  414. [   42.284000] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 17
  415. [   42.284000] [drm] Initialized i915 1.6.0 20060119 on minor 0
  416. [   61.196000] apm: BIOS not found.
  417. [   61.480000] ip_tables: (C) 2000-2006 Netfilter Core Team
  418. [   61.588000] Netfilter messages via NETLINK v0.30.
  419. [   61.604000] nf_conntrack version 0.5.0 (8115 buckets, 64920 max)
  420. [   64.764000] Bluetooth: Core ver 2.11
  421. [   64.764000] NET: Registered protocol family 31
  422. [   64.764000] Bluetooth: HCI device and connection manager initialized
  423. [   64.764000] Bluetooth: HCI socket layer initialized
  424. [   64.880000] Bluetooth: L2CAP ver 2.8
  425. [   64.880000] Bluetooth: L2CAP socket layer initialized
  426. [   65.112000] Bluetooth: RFCOMM socket layer initialized
  427. [   65.112000] Bluetooth: RFCOMM TTY layer initialized
  428. [   65.112000] Bluetooth: RFCOMM ver 1.8
  429. [ 1119.352000] ACPI: Transitioning device [FAN0] to D0
  430. [ 1119.352000] ACPI: Transitioning device [FAN0] to D0
  431. [ 1119.352000] ACPI: Unable to turn cooling device [df80dfcc] 'on'
  432. [email protected]:~$
  433.  
  434. [email protected]:~$ lspci
  435. 00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS/940GML and 945GT Express Memory Controller Hub (rev 03)
  436. 00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS/940GML Express Integrated Graphics Controller (rev 03)
  437. 00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/940GML Express Integrated Graphics Controller (rev 03)
  438. 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02)
  439. 00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 02)
  440. 00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 02)
  441. 00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 (rev 02)
  442. 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 (rev 02)
  443. 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 (rev 02)
  444. 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 (rev 02)
  445. 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 (rev 02)
  446. 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 02)
  447. 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
  448. 00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02)
  449. 00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) Serial ATA Storage Controller IDE (rev 02)
  450. 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 02)
  451. 05:00.0 Ethernet controller: Atheros Communications, Inc. Unknown device 001c (rev 01)
  452. 07:06.0 CardBus bridge: Texas Instruments PCIxx12 Cardbus Controller
  453. 07:06.1 FireWire (IEEE 1394): Texas Instruments PCIxx12 OHCI Compliant IEEE 1394 Host Controller
  454. 07:06.2 Mass storage controller: Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD)
  455. 07:06.3 Generic system peripheral [0805]: Texas Instruments PCIxx12 SDA Standard Compliant SD Host Controller
  456. 07:08.0 Ethernet controller: Intel Corporation PRO/100 VE Network Connection (rev 02)

advertising

Update the Post

Either update this post and resubmit it with changes, or make a new post.

You may also comment on this post.

update paste below
details of the post (optional)

Note: Only the paste content is required, though the following information can be useful to others.

Save name / title?

(space separated, optional)



Please note that information posted here will not expire by default. If you do not want it to expire, please set the expiry time above. If it is set to expire, web search engines will not be allowed to index it prior to it expiring. Items that are not marked to expire will be indexable by search engines. Be careful with your passwords. All illegal activities will be reported and any information will be handed over to the authorities, so be good.

comments powered by Disqus
worth-right
worth-right
worth-right