Part of Slepp's Projects — Pastebin — TURL — Imagebin — Filebin
Feedback -- English French German Japanese
Create Upload Newest Tools Donate

Paste Actions

Download Raw
Embed
Post to Twitter
Remove Paste

Paste Details

Raw format, 10 years 5 months old.

Advertising

Stuff
Tuesday, August 7th, 2007 at 2:26:25am UTC 

  1. [    0.000000] Linux version 2.6.20-16-generic ([email protected]) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Thu Jun 7 20:19:32 UTC 2007 (Ubuntu 2.6.20-16.29-generic)
  2. [    0.000000] BIOS-provided physical RAM map:
  3. [    0.000000] sanitize start
  4. [    0.000000] sanitize end
  5. [    0.000000] copy_e820_map() start: 0000000000000000 size: 0000000000098000 end: 0000000000098000 type: 1
  6. [    0.000000] copy_e820_map() type is E820_RAM
  7. [    0.000000] copy_e820_map() start: 0000000000098000 size: 0000000000008000 end: 00000000000a0000 type: 2
  8. [    0.000000] copy_e820_map() start: 00000000000e4000 size: 000000000001c000 end: 0000000000100000 type: 2
  9. [    0.000000] copy_e820_map() start: 0000000000100000 size: 000000007fe90000 end: 000000007ff90000 type: 1
  10. [    0.000000] copy_e820_map() type is E820_RAM
  11. [    0.000000] copy_e820_map() start: 000000007ff90000 size: 000000000000e000 end: 000000007ff9e000 type: 3
  12. [    0.000000] copy_e820_map() start: 000000007ff9e000 size: 0000000000042000 end: 000000007ffe0000 type: 4
  13. [    0.000000] copy_e820_map() start: 000000007ffe0000 size: 0000000000020000 end: 0000000080000000 type: 2
  14. [    0.000000] copy_e820_map() start: 00000000fee00000 size: 0000000000001000 end: 00000000fee01000 type: 2
  15. [    0.000000] copy_e820_map() start: 00000000ffb00000 size: 0000000000500000 end: 0000000100000000 type: 2
  16. [    0.000000]  BIOS-e820: 0000000000000000 - 0000000000098000 (usable)
  17. [    0.000000]  BIOS-e820: 0000000000098000 - 00000000000a0000 (reserved)
  18. [    0.000000]  BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
  19. [    0.000000]  BIOS-e820: 0000000000100000 - 000000007ff90000 (usable)
  20. [    0.000000]  BIOS-e820: 000000007ff90000 - 000000007ff9e000 (ACPI data)
  21. [    0.000000]  BIOS-e820: 000000007ff9e000 - 000000007ffe0000 (ACPI NVS)
  22. [    0.000000]  BIOS-e820: 000000007ffe0000 - 0000000080000000 (reserved)
  23. [    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
  24. [    0.000000]  BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
  25. [    0.000000] 1151MB HIGHMEM available.
  26. [    0.000000] 896MB LOWMEM available.
  27. [    0.000000] found SMP MP-table at 000ff780
  28. [    0.000000] Entering add_active_range(0, 0, 524176) 0 entries of 256 used
  29. [    0.000000] Zone PFN ranges:
  30. [    0.000000]   DMA             0 ->     4096
  31. [    0.000000]   Normal       4096 ->   229376
  32. [    0.000000]   HighMem    229376 ->   524176
  33. [    0.000000] early_node_map[1] active PFN ranges
  34. [    0.000000]     0:        0 ->   524176
  35. [    0.000000] On node 0 totalpages: 524176
  36. [    0.000000]   DMA zone: 32 pages used for memmap
  37. [    0.000000]   DMA zone: 0 pages reserved
  38. [    0.000000]   DMA zone: 4064 pages, LIFO batch:0
  39. [    0.000000]   Normal zone: 1760 pages used for memmap
  40. [    0.000000]   Normal zone: 223520 pages, LIFO batch:31
  41. [    0.000000]   HighMem zone: 2303 pages used for memmap
  42. [    0.000000]   HighMem zone: 292497 pages, LIFO batch:31
  43. [    0.000000] DMI 2.4 present.
  44. [    0.000000] ACPI: RSDP (v000 ACPIAM                                ) @ 0x000fa120
  45. [    0.000000] ACPI: RSDT (v001 MSTEST TESTONLY 0x07000713 MSFT 0x00000097) @ 0x7ff90000
  46. [    0.000000] ACPI: FADT (v002 MSTEST OEMFACP  0x07000713 MSFT 0x00000097) @ 0x7ff90200
  47. [    0.000000] ACPI: MADT (v001 MSTEST OEMAPIC  0x07000713 MSFT 0x00000097) @ 0x7ff90390
  48. [    0.000000] ACPI: MCFG (v001 MSTEST OEMMCFG  0x07000713 MSFT 0x00000097) @ 0x7ff90400
  49. [    0.000000] ACPI: OEMB (v001 MSTEST AMI_OEM  0x07000713 MSFT 0x00000097) @ 0x7ff9e040
  50. [    0.000000] ACPI: HPET (v001 MSTEST OEMHPET  0x07000713 MSFT 0x00000097) @ 0x7ff995e0
  51. [    0.000000] ACPI: DSDT (v001  A0724 A0724000 0x00000000 INTL 0x20060113) @ 0x00000000
  52. [    0.000000] ACPI: PM-Timer IO Port: 0x808
  53. [    0.000000] ACPI: Local APIC address 0xfee00000
  54. [    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
  55. [    0.000000] Processor #0 6:15 APIC version 20
  56. [    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
  57. [    0.000000] Processor #1 6:15 APIC version 20
  58. [    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
  59. [    0.000000] Processor #2 6:15 APIC version 20
  60. [    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
  61. [    0.000000] Processor #3 6:15 APIC version 20
  62. [    0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
  63. [    0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
  64. [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
  65. [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
  66. [    0.000000] ACPI: IRQ0 used by override.
  67. [    0.000000] ACPI: IRQ2 used by override.
  68. [    0.000000] ACPI: IRQ9 used by override.
  69. [    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
  70. [    0.000000] ACPI: HPET id: 0x8086a202 base: 0xfed00000
  71. [    0.000000] Using ACPI (MADT) for SMP configuration information
  72. [    0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:7ee00000)
  73. [    0.000000] Detected 2401.957 MHz processor.
  74. [   27.334806] Built 1 zonelists.  Total pages: 520081
  75. [   27.334809] Kernel command line: root=UUID=ea3b1cc2-c154-414b-883e-6161802584f8 ro
  76. [   27.334895] mapped APIC to ffffd000 (fee00000)
  77. [   27.334897] mapped IOAPIC to ffffc000 (fec00000)
  78. [   27.334898] Enabling fast FPU save and restore... done.
  79. [   27.334900] Enabling unmasked SIMD FPU exception support... done.
  80. [   27.334905] Initializing CPU#0
  81. [   27.334945] PID hash table entries: 4096 (order: 12, 16384 bytes)
  82. [   27.337561] Console: colour VGA+ 80x25
  83. [   27.342404] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  84. [   27.342690] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  85. [   27.392378] Memory: 2067612k/2096704k available (1992k kernel code, 27788k reserved, 900k data, 328k init, 1179200k highmem)
  86. [   27.392522] virtual kernel memory layout:
  87. [   27.392523]     fixmap  : 0xfff4e000 - 0xfffff000   ( 708 kB)
  88. [   27.392524]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
  89. [   27.392525]     vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
  90. [   27.392525]     lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
  91. [   27.392526]       .init : 0xc03d9000 - 0xc042b000   ( 328 kB)
  92. [   27.392527]       .data : 0xc02f2374 - 0xc03d36d4   ( 900 kB)
  93. [   27.392528]       .text : 0xc0100000 - 0xc02f2374   (1992 kB)
  94. [   27.393192] Checking if this processor honours the WP bit even in supervisor mode... Ok.
  95. [   27.393447] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
  96. [   27.393653] hpet0: 3 64-bit timers, 14318180 Hz
  97. [   27.394734] Using HPET for base-timer
  98. [   27.473389] Calibrating delay using timer specific routine.. 4807.21 BogoMIPS (lpj=9614429)
  99. [   27.473571] Security Framework v1.0.0 initialized
  100. [   27.473655] SELinux:  Disabled at boot.
  101. [   27.473741] Mount-cache hash table entries: 512
  102. [   27.473910] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001
  103. [   27.473915] monitor/mwait feature present.
  104. [   27.473993] using mwait in idle threads.
  105. [   27.474072] CPU: L1 I cache: 32K, L1 D cache: 32K
  106. [   27.474184] CPU: L2 cache: 4096K
  107. [   27.474259] CPU: Physical Processor ID: 0
  108. [   27.474336] CPU: Processor Core ID: 0
  109. [   27.474412] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001
  110. [   27.474419] Compat vDSO mapped to ffffe000.
  111. [   27.474498] Remapping vsyscall page to ffffe000
  112. [   27.474585] Checking 'hlt' instruction... OK.
  113. [   27.489530] SMP alternatives: switching to UP code
  114. [   27.489861] Early unpacking initramfs... done
  115. [   27.708673] ACPI: Core revision 20060707
  116. [   27.708950] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT.
  117. [   27.770905] CPU0: Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz stepping 0b
  118. [   27.771068] SMP alternatives: switching to SMP code
  119. [   27.771200] Booting processor 1/1 eip 3000
  120. [   27.781765] Initializing CPU#1
  121. [   27.861093] Calibrating delay using timer specific routine.. 4803.91 BogoMIPS (lpj=9607829)
  122. [   27.861097] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001
  123. [   27.861101] monitor/mwait feature present.
  124. [   27.861103] CPU: L1 I cache: 32K, L1 D cache: 32K
  125. [   27.861104] CPU: L2 cache: 4096K
  126. [   27.861106] CPU: Physical Processor ID: 0
  127. [   27.861106] CPU: Processor Core ID: 1
  128. [   27.861107] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001
  129. [   27.861591] CPU1: Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz stepping 0b
  130. [   27.862335] SMP alternatives: switching to SMP code
  131. [   27.862470] Booting processor 2/2 eip 3000
  132. [   27.873007] Initializing CPU#2
  133. [   27.953023] Calibrating delay using timer specific routine.. 4803.94 BogoMIPS (lpj=9607899)
  134. [   27.953028] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001
  135. [   27.953031] monitor/mwait feature present.
  136. [   27.953033] CPU: L1 I cache: 32K, L1 D cache: 32K
  137. [   27.953034] CPU: L2 cache: 4096K
  138. [   27.953036] CPU: Physical Processor ID: 0
  139. [   27.953036] CPU: Processor Core ID: 2
  140. [   27.953038] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001
  141. [   27.953556] CPU2: Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz stepping 0b
  142. [   27.954295] SMP alternatives: switching to SMP code
  143. [   27.954387] Booting processor 3/3 eip 3000
  144. [   27.964924] Initializing CPU#3
  145. [   28.044953] Calibrating delay using timer specific routine.. 4803.94 BogoMIPS (lpj=9607888)
  146. [   28.044958] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001
  147. [   28.044961] monitor/mwait feature present.
  148. [   28.044963] CPU: L1 I cache: 32K, L1 D cache: 32K
  149. [   28.044964] CPU: L2 cache: 4096K
  150. [   28.044966] CPU: Physical Processor ID: 0
  151. [   28.044966] CPU: Processor Core ID: 3
  152. [   28.044967] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001
  153. [   28.045525] CPU3: Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz stepping 0b
  154. [   28.046266] Total of 4 processors activated (19219.02 BogoMIPS).
  155. [   28.046470] ENABLING IO-APIC IRQs
  156. [   28.046699] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
  157. [   28.192842] checking TSC synchronization across 4 CPUs: passed.
  158. [    0.011936] Brought up 4 CPUs
  159. [    0.402127] migration_cost=37,3597
  160. [    0.402542] Booting paravirtualized kernel on bare hardware
  161. [    0.402695] Time:  0:45:26  Date: 07/06/107
  162. [    0.402815] NET: Registered protocol family 16
  163. [    0.402946] EISA bus registered
  164. [    0.403023] ACPI: bus type pci registered
  165. [    0.403205] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5
  166. [    0.403292] PCI: Using configuration type 1
  167. [    0.403370] Setting up standard PCI resources
  168. [    0.416323] ACPI: Interpreter enabled
  169. [    0.416405] ACPI: Using IOAPIC for interrupt routing
  170. [    0.416982] ACPI: PCI Root Bridge [PCI0] (0000:00)
  171. [    0.417067] PCI: Probing PCI hardware (bus 00)
  172. [    0.417713] PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
  173. [    0.417803] PCI quirk: region 0480-04bf claimed by ICH6 GPIO
  174. [    0.418014] Boot video device is 0000:01:00.0
  175. [    0.418565] PCI: Transparent bridge - 0000:00:1e.0
  176. [    0.418693] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
  177. [    0.434474] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
  178. [    0.434695] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
  179. [    0.438420] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
  180. [    0.438927] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
  181. [    0.439146] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
  182. [    0.441882] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
  183. [    0.442567] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
  184. [    0.443251] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 *15)
  185. [    0.443939] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)
  186. [    0.444622] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
  187. [    0.445415] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12 14 15)
  188. [    0.446101] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15)
  189. [    0.446786] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 *14 15)
  190. [    0.447342] Linux Plug and Play Support v0.97 (c) Adam Belay
  191. [    0.447438] pnp: PnP ACPI init
  192. [    0.451439] pnp: PnP ACPI: found 16 devices
  193. [    0.451519] PnPBIOS: Disabled by ACPI PNP
  194. [    0.451628] PCI: Using ACPI for IRQ routing
  195. [    0.451706] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
  196. [    0.461515] NET: Registered protocol family 8
  197. [    0.461594] NET: Registered protocol family 20
  198. [    0.462225] pnp: 00:08: ioport range 0x290-0x297 has been reserved
  199. [    0.462641] PCI: Bridge: 0000:00:01.0
  200. [    0.462718]   IO window: a000-afff
  201. [    0.462795]   MEM window: f8700000-fe7fffff
  202. [    0.462874]   PREFETCH window: bfe00000-dfdfffff
  203. [    0.462956] PCI: Bridge: 0000:00:1c.0
  204. [    0.463031]   IO window: disabled.
  205. [    0.463108]   MEM window: disabled.
  206. [    0.463185]   PREFETCH window: dfe00000-dfefffff
  207. [    0.463268] PCI: Bridge: 0000:00:1c.3
  208. [    0.463343]   IO window: disabled.
  209. [    0.463421]   MEM window: fe900000-fe9fffff
  210. [    0.463500]   PREFETCH window: disabled.
  211. [    0.463580] PCI: Bridge: 0000:00:1c.4
  212. [    0.463660]   IO window: b000-bfff
  213. [    0.463737]   MEM window: fe800000-fe8fffff
  214. [    0.463817]   PREFETCH window: disabled.
  215. [    0.463896] PCI: Bridge: 0000:00:1e.0
  216. [    0.463973]   IO window: c000-cfff
  217. [    0.464051]   MEM window: fea00000-feafffff
  218. [    0.464130]   PREFETCH window: disabled.
  219. [    0.464217] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
  220. [    0.465932] PCI: Setting latency timer of device 0000:00:01.0 to 64
  221. [    0.465945] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
  222. [    0.466099] PCI: Setting latency timer of device 0000:00:1c.0 to 64
  223. [    0.466113] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 17
  224. [    0.466267] PCI: Setting latency timer of device 0000:00:1c.3 to 64
  225. [    0.466280] ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 16
  226. [    0.466435] PCI: Setting latency timer of device 0000:00:1c.4 to 64
  227. [    0.466442] PCI: Setting latency timer of device 0000:00:1e.0 to 64
  228. [    0.466480] NET: Registered protocol family 2
  229. [    0.513380] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
  230. [    0.513571] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
  231. [    0.513987] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
  232. [    0.514216] TCP: Hash tables configured (established 131072 bind 65536)
  233. [    0.514305] TCP reno registered
  234. [    0.529525] checking if image is initramfs... it is
  235. [    0.961537] Freeing initrd memory: 6785k freed
  236. [    0.962331] audit: initializing netlink socket (disabled)
  237. [    0.962422] audit(1186361126.788:1): initialized
  238. [    0.962603] highmem bounce pool size: 64 pages
  239. [    0.962800] VFS: Disk quotas dquot_6.5.1
  240. [    0.962895] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  241. [    0.963032] io scheduler noop registered
  242. [    0.963144] io scheduler anticipatory registered
  243. [    0.963260] io scheduler deadline registered
  244. [    0.963388] io scheduler cfq registered (default)
  245. [    8.961092] 0000:00:1a.7 EHCI: BIOS handoff failed (BIOS bug ?) 01010001
  246. [    8.961443] PCI: Setting latency timer of device 0000:00:01.0 to 64
  247. [    8.961468] assign_interrupt_mode Found MSI capability
  248. [    8.961551] Allocate Port Service[0000:00:01.0:pcie00]
  249. [    8.961607] PCI: Setting latency timer of device 0000:00:1c.0 to 64
  250. [    8.961639] assign_interrupt_mode Found MSI capability
  251. [    8.961721] Allocate Port Service[0000:00:1c.0:pcie00]
  252. [    8.961739] Allocate Port Service[0000:00:1c.0:pcie02]
  253. [    8.961806] PCI: Setting latency timer of device 0000:00:1c.3 to 64
  254. [    8.961837] assign_interrupt_mode Found MSI capability
  255. [    8.961920] Allocate Port Service[0000:00:1c.3:pcie00]
  256. [    8.961939] Allocate Port Service[0000:00:1c.3:pcie02]
  257. [    8.962005] PCI: Setting latency timer of device 0000:00:1c.4 to 64
  258. [    8.962037] assign_interrupt_mode Found MSI capability
  259. [    8.962119] Allocate Port Service[0000:00:1c.4:pcie00]
  260. [    8.962137] Allocate Port Service[0000:00:1c.4:pcie02]
  261. [    8.962238] isapnp: Scanning for PnP cards...
  262. [    9.314924] isapnp: No Plug & Play device found
  263. [    9.327984] Real Time Clock Driver v1.12ac
  264. [    9.328164] hpet_resources: 0xfed00000 is busy
  265. [    9.328184] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
  266. [    9.328403] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
  267. [    9.328862] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
  268. [    9.329100] mice: PS/2 mouse device common for all mice
  269. [    9.329534] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
  270. [    9.329743] input: Macintosh mouse button emulation as /class/input/input0
  271. [    9.329854] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
  272. [    9.329942] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
  273. [    9.330202] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
  274. [    9.330289] PNP: PS/2 controller doesn't have AUX irq; using default 12
  275. [    9.332643] serio: i8042 KBD port at 0x60,0x64 irq 1
  276. [    9.332727] serio: i8042 AUX port at 0x60,0x64 irq 12
  277. [    9.333111] EISA: Probing bus 0 at eisa.0
  278. [    9.333211] EISA: Detected 0 cards.
  279. [    9.351733] input: AT Translated Set 2 keyboard as /class/input/input1
  280. [    9.363335] TCP cubic registered
  281. [    9.363421] NET: Registered protocol family 1
  282. [    9.363531] Starting balanced_irq
  283. [    9.363611] Using IPI No-Shortcut mode
  284. [    9.363765] ACPI: (supports S0 S1 S3 S4 S5)
  285. [    9.364054]   Magic number: 3:693:758
  286. [    9.364302] Freeing unused kernel memory: 328k freed
  287. [    9.364835] Time: tsc clocksource has been installed.
  288. [    9.520934] Capability LSM initialized
  289. [    9.548098] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [   AMI] OemTableId [  CPU1PM] [20060707]
  290. [    9.548635] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [   AMI] OemTableId [  CPU2PM] [20060707]
  291. [    9.549163] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [   AMI] OemTableId [  CPU3PM] [20060707]
  292. [    9.549683] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [   AMI] OemTableId [  CPU4PM] [20060707]
  293. [    9.775021] usbcore: registered new interface driver usbfs
  294. [    9.775121] usbcore: registered new interface driver hub
  295. [    9.775220] usbcore: registered new device driver usb
  296. [    9.775826] USB Universal Host Controller Interface driver v3.0
  297. [    9.775939] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
  298. [    9.776098] PCI: Setting latency timer of device 0000:00:1a.0 to 64
  299. [    9.776100] uhci_hcd 0000:00:1a.0: UHCI Host Controller
  300. [    9.776248] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
  301. [    9.776392] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e000
  302. [    9.776544] usb usb1: configuration #1 chosen from 1 choice
  303. [    9.776647] hub 1-0:1.0: USB hub found
  304. [    9.776729] hub 1-0:1.0: 2 ports detected
  305. [    9.788516] SCSI subsystem initialized
  306. [    9.804194] libata version 2.20 loaded.
  307. [    9.817789] Floppy drive(s): fd0 is 1.44M
  308. [    9.823520] ieee1394: Initialized config rom entry `ip1394'
  309. [    9.839004] FDC 0 is a post-1991 82077
  310. [    9.880777] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 17 (level, low) -> IRQ 18
  311. [    9.880953] PCI: Setting latency timer of device 0000:00:1a.1 to 64
  312. [    9.880956] uhci_hcd 0000:00:1a.1: UHCI Host Controller
  313. [    9.881053] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
  314. [    9.881197] uhci_hcd 0000:00:1a.1: irq 18, io base 0x0000e080
  315. [    9.881352] usb usb2: configuration #1 chosen from 1 choice
  316. [    9.881452] hub 2-0:1.0: USB hub found
  317. [    9.881531] hub 2-0:1.0: 2 ports detected
  318. [    9.985196] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 19
  319. [    9.985367] PCI: Setting latency timer of device 0000:00:1d.0 to 64
  320. [    9.985369] uhci_hcd 0000:00:1d.0: UHCI Host Controller
  321. [    9.985466] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3
  322. [    9.985608] uhci_hcd 0000:00:1d.0: irq 19, io base 0x0000d800
  323. [    9.985747] usb usb3: configuration #1 chosen from 1 choice
  324. [    9.985845] hub 3-0:1.0: USB hub found
  325. [    9.985924] hub 3-0:1.0: 2 ports detected
  326. [   10.089667] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 17
  327. [   10.089838] PCI: Setting latency timer of device 0000:00:1d.1 to 64
  328. [   10.089840] uhci_hcd 0000:00:1d.1: UHCI Host Controller
  329. [   10.089939] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4
  330. [   10.090080] uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000d880
  331. [   10.090216] usb usb4: configuration #1 chosen from 1 choice
  332. [   10.090314] hub 4-0:1.0: USB hub found
  333. [   10.090392] hub 4-0:1.0: 2 ports detected
  334. [   10.193973] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 20
  335. [   10.194143] PCI: Setting latency timer of device 0000:00:1d.2 to 64
  336. [   10.194145] uhci_hcd 0000:00:1d.2: UHCI Host Controller
  337. [   10.194241] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5
  338. [   10.194382] uhci_hcd 0000:00:1d.2: irq 20, io base 0x0000dc00
  339. [   10.194521] usb usb5: configuration #1 chosen from 1 choice
  340. [   10.194619] hub 5-0:1.0: USB hub found
  341. [   10.194698] hub 5-0:1.0: 2 ports detected
  342. [   10.298466] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 20
  343. [   10.298645] PCI: Setting latency timer of device 0000:00:1a.7 to 64
  344. [   10.298648] ehci_hcd 0000:00:1a.7: EHCI Host Controller
  345. [   10.298751] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6
  346. [   10.298894] ehci_hcd 0000:00:1a.7: debug port 1
  347. [   10.298977] PCI: cache line size of 32 is not supported by device 0000:00:1a.7
  348. [   10.298983] ehci_hcd 0000:00:1a.7: irq 20, io mem 0xfebff400
  349. [   10.302953] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
  350. [   10.303127] usb usb6: configuration #1 chosen from 1 choice
  351. [   10.303230] hub 6-0:1.0: USB hub found
  352. [   10.303308] hub 6-0:1.0: 4 ports detected
  353. [   10.404638] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 19
  354. [   10.404807] PCI: Setting latency timer of device 0000:00:1d.7 to 64
  355. [   10.404810] ehci_hcd 0000:00:1d.7: EHCI Host Controller
  356. [   10.404906] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7
  357. [   10.405049] ehci_hcd 0000:00:1d.7: debug port 1
  358. [   10.405132] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
  359. [   10.405136] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfebff000
  360. [   10.409102] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
  361. [   10.409272] usb usb7: configuration #1 chosen from 1 choice
  362. [   10.409374] hub 7-0:1.0: USB hub found
  363. [   10.409453] hub 7-0:1.0: 6 ports detected
  364. [   10.512908] ACPI: PCI Interrupt 0000:05:03.0[A] -> GSI 21 (level, low) -> IRQ 21
  365. [   10.565728] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[21]  MMIO=[feaef800-feaeffff]  Max Packet=[2048]  IR/IT contexts=[4/8]
  366. [   10.570901] ahci 0000:00:1f.2: version 2.1
  367. [   10.570922] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 17
  368. [   11.057146] usb 6-2: new high speed USB device using ehci_hcd and address 2
  369. [   11.194522] usb 6-2: configuration #1 chosen from 1 choice
  370. [   11.574819] PCI: Setting latency timer of device 0000:00:1f.2 to 64
  371. [   11.574826] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl RAID mode
  372. [   11.574955] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part
  373. [   11.575141] ata1: SATA max UDMA/133 cmd 0xf88ba900 ctl 0x00000000 bmdma 0x00000000 irq 17
  374. [   11.575307] ata2: SATA max UDMA/133 cmd 0xf88ba980 ctl 0x00000000 bmdma 0x00000000 irq 17
  375. [   11.575469] ata3: SATA max UDMA/133 cmd 0xf88baa00 ctl 0x00000000 bmdma 0x00000000 irq 17
  376. [   11.575630] ata4: SATA max UDMA/133 cmd 0xf88baa80 ctl 0x00000000 bmdma 0x00000000 irq 17
  377. [   11.575792] ata5: SATA max UDMA/133 cmd 0xf88bab00 ctl 0x00000000 bmdma 0x00000000 irq 17
  378. [   11.575952] ata6: SATA max UDMA/133 cmd 0xf88bab80 ctl 0x00000000 bmdma 0x00000000 irq 17
  379. [   11.576081] scsi0 : ahci
  380. [   11.618880] usb 7-6: new high speed USB device using ehci_hcd and address 3
  381. [   11.759288] usb 7-6: configuration #1 chosen from 1 choice
  382. [   11.843557] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[0011d800013c1eab]
  383. [   11.999781] usb 5-1: new low speed USB device using uhci_hcd and address 2
  384. [   12.059978] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  385. [   12.076946] ata1.00: ata_hpa_resize 1: sectors = 976773168, hpa_sectors = 976773168
  386. [   12.077078] ata1.00: ATA-8: SAMSUNG HD501LJ, CR100-10, max UDMA7
  387. [   12.077165] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
  388. [   12.079183] ata1.00: ata_hpa_resize 1: sectors = 976773168, hpa_sectors = 976773168
  389. [   12.079309] ata1.00: configured for UDMA/133
  390. [   12.079391] scsi1 : ahci
  391. [   12.179088] usb 5-1: configuration #1 chosen from 1 choice
  392. [   12.182138] usbcore: registered new interface driver libusual
  393. [   12.184888] Initializing USB Mass Storage driver...
  394. [   12.185027] scsi6 : SCSI emulation for USB Mass Storage devices
  395. [   12.185148] usb-storage: device found at 3
  396. [   12.185149] usb-storage: waiting for device to settle before scanning
  397. [   12.185151] usbcore: registered new interface driver usb-storage
  398. [   12.185239] USB Mass Storage support registered.
  399. [   12.189108] usbcore: registered new interface driver hiddev
  400. [   12.207093] input: Logitech USB Receiver as /class/input/input2
  401. [   12.207205] input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.2-1
  402. [   12.207398] usbcore: registered new interface driver usbhid
  403. [   12.207482] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
  404. [   12.566164] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  405. [   12.570132] ata2.00: ata_hpa_resize 1: sectors = 976773168, hpa_sectors = 976773168
  406. [   12.570265] ata2.00: ATA-8: SAMSUNG HD501LJ, CR100-10, max UDMA7
  407. [   12.570351] ata2.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
  408. [   12.572377] ata2.00: ata_hpa_resize 1: sectors = 976773168, hpa_sectors = 976773168
  409. [   12.572506] ata2.00: configured for UDMA/133
  410. [   12.572588] scsi2 : ahci
  411. [   12.883151] ata3: SATA link down (SStatus 0 SControl 300)
  412. [   12.883242] scsi3 : ahci
  413. [   13.196342] ata4: SATA link down (SStatus 0 SControl 300)
  414. [   13.196432] scsi4 : ahci
  415. [   13.678103] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  416. [   13.698653] ata5.00: ata_hpa_resize 1: sectors = 976773168, hpa_sectors = 976773168
  417. [   13.698784] ata5.00: ATA-8: SAMSUNG HD501LJ, CR100-10, max UDMA7
  418. [   13.698871] ata5.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
  419. [   13.700882] ata5.00: ata_hpa_resize 1: sectors = 976773168, hpa_sectors = 976773168
  420. [   13.701008] ata5.00: configured for UDMA/133
  421. [   13.701089] scsi5 : ahci
  422. [   14.184258] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  423. [   14.191452] ata6.00: ata_hpa_resize 1: sectors = 976773168, hpa_sectors = 976773168
  424. [   14.191583] ata6.00: ATA-8: SAMSUNG HD501LJ, CR100-10, max UDMA7
  425. [   14.191669] ata6.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
  426. [   14.193661] ata6.00: ata_hpa_resize 1: sectors = 976773168, hpa_sectors = 976773168
  427. [   14.193793] ata6.00: configured for UDMA/133
  428. [   14.193935] scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG HD501LJ  CR10 PQ: 0 ANSI: 5
  429. [   14.194608] scsi 1:0:0:0: Direct-Access     ATA      SAMSUNG HD501LJ  CR10 PQ: 0 ANSI: 5
  430. [   14.196124] scsi 4:0:0:0: Direct-Access     ATA      SAMSUNG HD501LJ  CR10 PQ: 0 ANSI: 5
  431. [   14.196767] scsi 5:0:0:0: Direct-Access     ATA      SAMSUNG HD501LJ  CR10 PQ: 0 ANSI: 5
  432. [   14.197410] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
  433. [   15.202355] PCI: Setting latency timer of device 0000:02:00.0 to 64
  434. [   15.202364] ahci 0000:02:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
  435. [   15.202492] ahci 0000:02:00.0: flags: 64bit ncq pm led clo pmp pio slum part
  436. [   15.202627] ata7: SATA max UDMA/133 cmd 0xf89cc100 ctl 0x00000000 bmdma 0x00000000 irq 16
  437. [   15.202792] ata8: SATA max UDMA/133 cmd 0xf89cc180 ctl 0x00000000 bmdma 0x00000000 irq 16
  438. [   15.202921] scsi7 : ahci
  439. [   15.514992] ata7: SATA link down (SStatus 0 SControl 300)
  440. [   15.515085] scsi8 : ahci
  441. [   15.827647] ata8: SATA link down (SStatus 0 SControl 300)
  442. [   15.827825] PCI: Enabling device 0000:02:00.1 (0000 -> 0001)
  443. [   15.827918] ACPI: PCI Interrupt 0000:02:00.1[B] -> GSI 17 (level, low) -> IRQ 18
  444. [   15.828095] PCI: Setting latency timer of device 0000:02:00.1 to 64
  445. [   15.828128] ata9: PATA max UDMA/100 cmd 0x0001bc00 ctl 0x0001b882 bmdma 0x0001b400 irq 18
  446. [   15.828282] ata10: PATA max UDMA/100 cmd 0x0001b800 ctl 0x0001b482 bmdma 0x0001b408 irq 18
  447. [   15.828417] scsi9 : pata_jmicron
  448. [   15.833186] SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB)
  449. [   15.833284] sda: Write Protect is off
  450. [   15.833362] sda: Mode Sense: 00 3a 00 00
  451. [   15.833371] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  452. [   15.833531] SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB)
  453. [   15.833633] sda: Write Protect is off
  454. [   15.833709] sda: Mode Sense: 00 3a 00 00
  455. [   15.833721] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  456. [   15.833851]  sda: sda1
  457. [   15.900761] sd 0:0:0:0: Attached scsi disk sda
  458. [   15.900871] SCSI device sdb: 976773168 512-byte hdwr sectors (500108 MB)
  459. [   15.900970] sdb: Write Protect is off
  460. [   15.901047] sdb: Mode Sense: 00 3a 00 00
  461. [   15.901056] SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  462. [   15.901208] SCSI device sdb: 976773168 512-byte hdwr sectors (500108 MB)
  463. [   15.901301] sdb: Write Protect is off
  464. [   15.901377] sdb: Mode Sense: 00 3a 00 00
  465. [   15.901387] SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  466. [   15.901516]  sdb: sdb1
  467. [   15.947068] sd 1:0:0:0: Attached scsi disk sdb
  468. [   15.947172] SCSI device sdc: 976773168 512-byte hdwr sectors (500108 MB)
  469. [   15.947271] sdc: Write Protect is off
  470. [   15.947347] sdc: Mode Sense: 00 3a 00 00
  471. [   15.947356] SCSI device sdc: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  472. [   15.947507] SCSI device sdc: 976773168 512-byte hdwr sectors (500108 MB)
  473. [   15.947600] sdc: Write Protect is off
  474. [   15.947676] sdc: Mode Sense: 00 3a 00 00
  475. [   15.947686] SCSI device sdc: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  476. [   15.947815]  sdc: sdc1
  477. [   15.977069] sd 4:0:0:0: Attached scsi disk sdc
  478. [   15.977185] SCSI device sdd: 976773168 512-byte hdwr sectors (500108 MB)
  479. [   15.977279] sdd: Write Protect is off
  480. [   15.977360] sdd: Mode Sense: 00 3a 00 00
  481. [   15.977369] SCSI device sdd: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  482. [   15.977518] SCSI device sdd: 976773168 512-byte hdwr sectors (500108 MB)
  483. [   15.977611] sdd: Write Protect is off
  484. [   15.977687] sdd: Mode Sense: 00 3a 00 00
  485. [   15.977696] SCSI device sdd: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  486. [   15.977825]  sdd:
  487. [   16.003770] sd 5:0:0:0: Attached scsi disk sdd
  488. [   16.007175] sd 0:0:0:0: Attached scsi generic sg0 type 0
  489. [   16.007343] sd 1:0:0:0: Attached scsi generic sg1 type 0
  490. [   16.007511] sd 4:0:0:0: Attached scsi generic sg2 type 0
  491. [   16.007686] sd 5:0:0:0: Attached scsi generic sg3 type 0
  492. [   16.149509] ata9.00: ATAPI, max UDMA/66
  493. [   16.233700] Attempting manual resume
  494. [   16.233777] swsusp: Resume From Partition 8:33
  495. [   16.233778] PM: Checking swsusp image.
  496. [   16.233900] PM: Resume from disk failed.
  497. [   16.263705] kjournald starting.  Commit interval 5 seconds
  498. [   16.263810] EXT3-fs: mounted filesystem with ordered data mode.
  499. [   16.315003] ata9.00: configured for UDMA/66
  500. [   16.315101] scsi10 : pata_jmicron
  501. [   16.478818] ATA: abnormal status 0x7F on port 0x0001b807
  502. [   16.482213] scsi 9:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-H44L  SB00 PQ: 0 ANSI: 5
  503. [   16.482389] scsi 9:0:0:0: Attached scsi generic sg4 type 5
  504. [   17.179441] usb-storage: device scan complete
  505. [   17.179832] scsi 6:0:0:0: Direct-Access     VBTM     Store 'n' Go     5.00 PQ: 0 ANSI: 0 CCS
  506. [   17.181055] SCSI device sde: 3992576 512-byte hdwr sectors (2044 MB)
  507. [   17.181804] sde: Write Protect is off
  508. [   17.181883] sde: Mode Sense: 23 00 00 00
  509. [   17.181885] sde: assuming drive cache: write through
  510. [   17.184053] SCSI device sde: 3992576 512-byte hdwr sectors (2044 MB)
  511. [   17.184801] sde: Write Protect is off
  512. [   17.184880] sde: Mode Sense: 23 00 00 00
  513. [   17.184882] sde: assuming drive cache: write through
  514. [   17.184965]  sde: sde1 sde2
  515. [   17.185741] sd 6:0:0:0: Attached scsi removable disk sde
  516. [   17.185846] sd 6:0:0:0: Attached scsi generic sg5 type 0
  517. [   21.499118] input: PC Speaker as /class/input/input3
  518. [   21.514453] parport: PnPBIOS parport detected.
  519. [   21.514630] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
  520. [   21.517195] ath_hal: module license 'Proprietary' taints kernel.
  521. [   21.518436] ath_hal: 0.9.18.0 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
  522. [   21.531506] Linux agpgart interface v0.102 (c) Dave Jones
  523. [   21.546795] agpgart: Detected an Intel 965G Chipset.
  524. [   21.559209] agpgart: AGP aperture is 256M @ 0x0
  525. [   21.598741] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
  526. [   21.599839] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
  527. [   21.621232] iTCO_vendor_support: vendor-support=0
  528. [   21.631640] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (11-Nov-2006)
  529. [   21.631776] iTCO_wdt: Found a ICH8 or ICH8R TCO device (Version=2, TCOBASE=0x0860)
  530. [   21.633480] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
  531. [   21.703583] wlan: 0.8.4.2 (0.9.3.1)
  532. [   21.715292] ath_pci: 0.9.4.5 (0.9.3.1)
  533. [   21.715600] ACPI: PCI Interrupt 0000:05:02.0[A] -> GSI 23 (level, low) -> IRQ 19
  534. [   22.361902] ath_rate_sample: 1.2 (0.9.3.1)
  535. [   22.362936] wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
  536. [   22.363181] wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
  537. [   22.363711] wifi0: turboG rates: 6Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
  538. [   22.364079] wifi0: H/W encryption support: WEP AES AES_CCM TKIP
  539. [   22.364316] wifi0: mac 7.9 phy 4.5 radio 5.6
  540. [   22.364456] wifi0: Use hw queue 1 for WME_AC_BE traffic
  541. [   22.364539] wifi0: Use hw queue 0 for WME_AC_BK traffic
  542. [   22.364622] wifi0: Use hw queue 2 for WME_AC_VI traffic
  543. [   22.364705] wifi0: Use hw queue 3 for WME_AC_VO traffic
  544. [   22.364788] wifi0: Use hw queue 8 for CAB traffic
  545. [   22.364868] wifi0: Use hw queue 9 for beacons
  546. [   22.401227] Linux video capture interface: v2.00
  547. [   22.406032] Attansic L1 Ethernet Network Driver - version 2.0.6
  548. [   22.406125] Copyright(c) 2005-2006 Attansic Corporation.
  549. [   22.439053] wifi0: Atheros 5212: mem=0xfeaf0000, irq=19
  550. [   22.439233] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 19 (level, low) -> IRQ 17
  551. [   22.439397] PCI: Setting latency timer of device 0000:03:00.0 to 64
  552. [   22.440670] em28xx v4l2 driver version 0.0.1 loaded
  553. [   22.524957] em28xx new video device (2040:4200): interface 0, class 255
  554. [   22.525049] em28xx #0: Alternate settings: 8
  555. [   22.525129] em28xx #0: Alternate setting 0, max size= 0
  556. [   22.525212] em28xx #0: Alternate setting 1, max size= 1024
  557. [   22.525296] em28xx #0: Alternate setting 2, max size= 1448
  558. [   22.525380] em28xx #0: Alternate setting 3, max size= 2048
  559. [   22.525465] em28xx #0: Alternate setting 4, max size= 2304
  560. [   22.525549] em28xx #0: Alternate setting 5, max size= 2580
  561. [   22.525632] em28xx #0: Alternate setting 6, max size= 2892
  562. [   22.525716] em28xx #0: Alternate setting 7, max size= 3072
  563. [   22.554828] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
  564. [   22.554956] Uniform CD-ROM driver Revision: 3.20
  565. [   22.555073] sr 9:0:0:0: Attached scsi CD-ROM sr0
  566. [   22.559612] atl1 0000:03:00.0: Unable to enable MSI: -22
  567. [   22.626041] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
  568. [   22.626227] PCI: Setting latency timer of device 0000:00:1b.0 to 64
  569. [   22.637303] em28xx #0: AC97 command still being executed: not handled properly!
  570. [   22.884123] tuner 0-0063: chip found @ 0xc6 (em28xx #0)
  571. [   22.884435] tuner 0-0063: type set to 43 (Philips NTSC MK3 (FM1236MK3 or FM1236/F))
  572. [   22.884560] tuner 0-0063: type set to 43 (Philips NTSC MK3 (FM1236MK3 or FM1236/F))
  573. [   22.926272] em28xx #0: i2c eeprom 00: 1a eb 67 95 40 20 00 42 20 00 44 03 82 18 6a 18
  574. [   22.930537] em28xx #0: i2c eeprom 10: 00 00 24 57 6e 02 00 00 60 00 00 00 02 00 00 00
  575. [   22.931244] em28xx #0: i2c eeprom 20: 1e 00 10 10 00 00 00 88 b8 00 00 00 00 00 00 00
  576. [   22.931886] em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 01 01 01 01 00 00 00 00
  577. [   22.932528] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  578. [   22.933182] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  579. [   22.933823] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 18 03 30 00 30 00
  580. [   22.934719] em28xx #0: i2c eeprom 70: 30 00 38 00 37 00 30 00 36 00 39 00 32 00 31 00
  581. [   22.935360] em28xx #0: i2c eeprom 80: 00 00 18 03 57 00 69 00 6e 00 54 00 56 00 20 00
  582. [   22.936002] em28xx #0: i2c eeprom 90: 55 00 53 00 42 00 32 00 00 00 00 00 00 00 00 00
  583. [   22.936652] em28xx #0: i2c eeprom a0: 84 12 00 00 05 50 1a 7f 08 63 23 1c a4 59 16 91
  584. [   22.937292] em28xx #0: i2c eeprom b0: 1f 00 00 00 04 84 0a 00 01 01 20 77 00 40 69 db
  585. [   22.937931] em28xx #0: i2c eeprom c0: 84 00 74 02 01 0c 03 79 dd 00 00 00 00 00 00 00
  586. [   22.938572] em28xx #0: i2c eeprom d0: 84 12 00 00 05 50 1a 7f 08 63 23 1c a4 59 16 91
  587. [   22.939210] em28xx #0: i2c eeprom e0: 1f 00 00 00 04 84 0a 00 01 01 20 77 00 40 69 db
  588. [   22.939849] em28xx #0: i2c eeprom f0: 84 00 74 02 01 0c 03 79 dd 00 00 00 00 00 00 00
  589. [   22.940505] EEPROM ID= 0x9567eb1a
  590. [   22.940580] Vendor/Product ID= 2040:4200
  591. [   22.940669] I2S audio, sample rate=32k
  592. [   22.940747] 500mA max power
  593. [   22.940820] Table at 0x24, strings=0x1882, 0x186a, 0x0000
  594. [   22.957133] input: i2c IR (EM2840 Hauppauge) as /class/input/input4
  595. [   22.957240] ir-kbd-i2c: i2c IR (EM2840 Hauppauge) detected at i2c-0/0-0030/ir0 [em28xx #0]
  596. [   23.052550] msp3400 0-0044: MSP3445G-B8 found @ 0x88 (em28xx #0)
  597. [   23.052642] msp3400 0-0044: MSP3445G-B8 supports radio, mode is autodetect and autoselect
  598. [   23.053051] tveeprom 0-0050: Hauppauge model 42012, rev D199, serial# 8706921
  599. [   23.053143] tveeprom 0-0050: tuner model is TCL 2002N 5H (idx 99, type 50)
  600. [   23.053233] tveeprom 0-0050: TV standards NTSC(M) (eeprom 0x08)
  601. [   23.053318] tveeprom 0-0050: audio processor is MSP3445 (idx 12)
  602. [   23.053404] tveeprom 0-0050: has radio
  603. [   23.165916] tvp5150 0-005c: tvp5150am1 detected.
  604. [   23.603304] NET: Registered protocol family 17
  605. [   25.442872] em28xx #0: AC97 command still being executed: not handled properly!
  606. [   25.678189] registered VBI
  607. [   25.936832] em28xx #0: V4L2 device registered as /dev/video0 and /dev/vbi0
  608. [   25.936924] em28xx #0: Found Hauppauge WinTV USB 2
  609. [   25.937015] em28xx audio device (2040:4200): interface 1, class 1
  610. [   25.937105] em28xx audio device (2040:4200): interface 2, class 1
  611. [   25.937204] usbcore: registered new interface driver em28xx
  612. [   25.944590] usbcore: registered new interface driver snd-usb-audio
  613. [   26.104560] fuse init (API version 7.8)
  614. [   26.126944] lp0: using parport0 (interrupt-driven).
  615. [   26.165031] Adding 6144852k swap on /dev/disk/by-uuid/33ea4f2a-3d14-434c-9a91-7c26c1d74306.  Priority:-1 extents:1 across:6144852k
  616. [   26.214908] msp3400 0-0044: I/O error #0 (write 0x12/0x07)
  617. [   26.215062] em28xx #0: reading i2c device failed (error=-71)
  618. [   26.226590] EXT3 FS on sda1, internal journal
  619. [   26.239378] msp3400 0-0044: I/O error #1 (write 0x12/0x07)
  620. [   26.260071] msp3400 0-0044: I/O error #2 (write 0x12/0x07)
  621. [   26.272357] msp3400 0-0044: giving up, resetting chip. Sound will go off, sorry folks :-|
  622. [   26.284507] msp3400 0-0044: chip reset failed
  623. [   26.296845] msp3400 0-0044: I/O error #0 (write 0x12/0x01)
  624. [   26.321229] msp3400 0-0044: I/O error #1 (write 0x12/0x01)
  625. [   26.321358] em28xx #0: reading i2c device failed (error=-71)
  626. [   26.345286] msp3400 0-0044: I/O error #2 (write 0x12/0x01)
  627. [   26.357240] msp3400 0-0044: giving up, resetting chip. Sound will go off, sorry folks :-|
  628. [   26.369230] msp3400 0-0044: chip reset failed
  629. [   26.381244] msp3400 0-0044: I/O error #0 (write 0x12/0x02)
  630. [   26.405417] msp3400 0-0044: I/O error #1 (write 0x12/0x02)
  631. [   26.419460] kjournald starting.  Commit interval 5 seconds
  632. [   26.419703] EXT3 FS on sdb1, internal journal
  633. [   26.419708] EXT3-fs: mounted filesystem with ordered data mode.
  634. [   26.429703] msp3400 0-0044: I/O error #2 (write 0x12/0x02)
  635. [   26.429775] em28xx #0: reading i2c device failed (error=-71)
  636. [   26.441838] msp3400 0-0044: giving up, resetting chip. Sound will go off, sorry folks :-|
  637. [   26.453904] msp3400 0-0044: chip reset failed
  638. [   26.465988] msp3400 0-0044: I/O error #0 (write 0x12/0x03)
  639. [   26.490223] msp3400 0-0044: I/O error #1 (write 0x12/0x03)
  640. [   26.514306] msp3400 0-0044: I/O error #2 (write 0x12/0x03)
  641. [   26.526337] msp3400 0-0044: giving up, resetting chip. Sound will go off, sorry folks :-|
  642. [   26.538351] msp3400 0-0044: chip reset failed
  643. [   26.538472] em28xx #0: reading i2c device failed (error=-71)
  644. [   26.550433] msp3400 0-0044: I/O error #0 (write 0x12/0x04)
  645. [   26.574548] msp3400 0-0044: I/O error #1 (write 0x12/0x04)
  646. [   26.598683] msp3400 0-0044: I/O error #2 (write 0x12/0x04)
  647. [   26.610754] msp3400 0-0044: giving up, resetting chip. Sound will go off, sorry folks :-|
  648. [   26.622816] msp3400 0-0044: chip reset failed
  649. [   26.634879] msp3400 0-0044: I/O error #0 (write 0x12/0x13)
  650. [   26.635998] em28xx #0: reading i2c device failed (error=-71)
  651. [   26.659056] msp3400 0-0044: I/O error #1 (write 0x12/0x13)
  652. [   26.683182] msp3400 0-0044: I/O error #2 (write 0x12/0x13)
  653. [   26.695234] msp3400 0-0044: giving up, resetting chip. Sound will go off, sorry folks :-|
  654. [   26.707318] msp3400 0-0044: chip reset failed
  655. [   26.736174] em28xx #0: reading i2c device failed (error=-71)
  656. [   26.836350] em28xx #0: reading i2c device failed (error=-71)
  657. [   26.936527] em28xx #0: reading i2c device failed (error=-71)
  658. [   27.019207] NET: Registered protocol family 10
  659. [   27.019309] lo: Disabled Privacy Extensions
  660. [   27.019385] ADDRCONF(NETDEV_UP): eth0: link is not ready
  661. [   27.036970] em28xx #0: reading i2c device failed (error=-71)
  662. [   27.137140] em28xx #0: reading i2c device failed (error=-71)
  663. [   27.237317] em28xx #0: reading i2c device failed (error=-71)
  664. [   27.337484] em28xx #0: reading i2c device failed (error=-71)
  665. [   27.437660] em28xx #0: reading i2c device failed (error=-71)
  666. [   27.537837] em28xx #0: reading i2c device failed (error=-71)
  667. [   27.638021] em28xx #0: reading i2c device failed (error=-71)
  668. [   27.738193] em28xx #0: reading i2c device failed (error=-71)
  669. [   27.838368] em28xx #0: reading i2c device failed (error=-71)
  670. [   27.938543] em28xx #0: reading i2c device failed (error=-71)
  671. [   28.038721] em28xx #0: reading i2c device failed (error=-71)
  672. [   28.138897] em28xx #0: reading i2c device failed (error=-71)
  673. [   28.239073] em28xx #0: reading i2c device failed (error=-71)
  674. [   28.339250] em28xx #0: reading i2c device failed (error=-71)
  675. [   28.439426] em28xx #0: reading i2c device failed (error=-71)
  676. [   28.539604] em28xx #0: reading i2c device failed (error=-71)
  677. [   28.639786] em28xx #0: reading i2c device failed (error=-71)
  678. [   28.739957] em28xx #0: reading i2c device failed (error=-71)
  679. [   28.840265] em28xx #0: reading i2c device failed (error=-71)
  680. [   28.940437] em28xx #0: reading i2c device failed (error=-71)
  681. [   29.040612] em28xx #0: reading i2c device failed (error=-71)
  682. [   29.140789] em28xx #0: reading i2c device failed (error=-71)
  683. [   29.240965] em28xx #0: reading i2c device failed (error=-71)
  684. [   29.341142] em28xx #0: reading i2c device failed (error=-71)
  685. [   29.441318] em28xx #0: reading i2c device failed (error=-71)
  686. [   29.541495] em28xx #0: reading i2c device failed (error=-71)
  687. [   29.637675] em28xx #0: reading i2c device failed (error=-71)
  688. [   29.737852] em28xx #0: reading i2c device failed (error=-71)
  689. [   29.838028] em28xx #0: reading i2c device failed (error=-71)
  690. [   29.938588] em28xx #0: reading i2c device failed (error=-71)
  691. [   30.038764] em28xx #0: reading i2c device failed (error=-71)
  692. [   30.138937] em28xx #0: reading i2c device failed (error=-71)
  693. [   30.239238] em28xx #0: reading i2c device failed (error=-71)

advertising

Update the Post

Either update this post and resubmit it with changes, or make a new post.

You may also comment on this post.

update paste below
details of the post (optional)

Note: Only the paste content is required, though the following information can be useful to others.

Save name / title?

(space separated, optional)



Please note that information posted here will not expire by default. If you do not want it to expire, please set the expiry time above. If it is set to expire, web search engines will not be allowed to index it prior to it expiring. Items that are not marked to expire will be indexable by search engines. Be careful with your passwords. All illegal activities will be reported and any information will be handed over to the authorities, so be good.

comments powered by Disqus
worth-right
worth-right
worth-right