Part of Slepp's ProjectsPastebinTURLImagebinFilebin
Feedback -- English French German Japanese
Create Upload Newest Tools Donate

Advertising

LINUX : MIPI DSI panel support
Monday, December 7th, 2015 at 6:31:52pm UTC 

  1. Format: Log Type - Time(microsec) - Message - Optional Info
  2. Log Type: B - Since Boot(Power On Reset),  D - Delta,  S - Statistic
  3. S - QC_IMAGE_VERSION_STRING=BOOT.BF.3.0-00261
  4. S - IMAGE_VARIANT_STRING=HAAAANAAA
  5. S - OEM_IMAGE_VERSION_STRING=C-BPATTH
  6. S - Boot Config, 0x000002e3
  7. S - Core 0 Frequency, 0 MHz
  8. B -      1545 - PBL, Start
  9. B -      3490 - bootable_media_detect_entry, Start
  10. B -    170095 - bootable_media_detect_success, Start
  11. B -    170100 - elf_loader_entry, Start
  12. B -    171838 - auth_hash_seg_entry, Start
  13. B -    172048 - auth_hash_seg_exit, Start
  14. B -    187553 - elf_segs_hash_verify_entry, Start
  15. B -    246429 - PBL, End
  16. B -    253485 - SBL1, Start
  17. B -    316590 - pm_device_init, Start
  18. D -     14701 - pm_device_init, Delta
  19. B -    331901 - boot_flash_init, Start
  20. D -         0 - boot_flash_init, Delta
  21. B -    335927 - boot_config_data_table_init, Start
  22. D -     20130 - boot_config_data_table_init, Delta - (0 Bytes)
  23. B -    360601 - CDT version:3,Platform ID:24,Major ID:1,Minor ID:0,Subtype:0
  24. B -    366793 - sbl1_ddr_set_params, Start
  25. B -    370514 - cpr_init, Start
  26. D -         0 - cpr_init, Delta
  27. B -    376126 - Pre_DDR_clock_init, Start
  28. D -       213 - Pre_DDR_clock_init, Delta
  29. D -         0 - sbl1_ddr_set_params, Delta
  30. B -    388631 - pm_driver_init, Start
  31. D -      6832 - pm_driver_init, Delta
  32. B -    404125 - clock_init, Start
  33. D -        30 - clock_init, Delta
  34. B -    414281 - Image Load, Start
  35. D -     23577 - QSEE Image Loaded, Delta - (460664 Bytes)
  36. B -    437888 - Image Load, Start
  37. D -       305 - SEC Image Loaded, Delta - (2048 Bytes)
  38. B -    445117 - sbl1_efs_handle_cookies, Start
  39. D -        91 - sbl1_efs_handle_cookies, Delta
  40. B -    452864 - Image Load, Start
  41. D -     12200 - QHEE Image Loaded, Delta - (51952 Bytes)
  42. B -    465094 - Image Load, Start
  43. D -     14122 - RPM Image Loaded, Delta - (149492 Bytes)
  44. B -    479246 - Image Load, Start
  45. D -     12566 - APPSBL Image Loaded, Delta - (487604 Bytes)
  46. B -    491843 - QSEE Execution, Start
  47. D -        61 - QSEE Execution, Delta
  48. B -    497516 - SBL1, End
  49. D -    246410 - SBL1, Delta
  50. S - Flash Throughput, 110000 KB/s  (1151760 Bytes,  10431 us)
  51. S - DDR Frequency, 400 MHz
  52. Android Bootloader - UART_DM Initialized!!!
  53. [0] welcome to lk
  54.  
  55. [10] platform_init()
  56. [10] target_init()
  57. [30] SDHC Running in HS200 mode
  58. [40] Done initialization of the card
  59. [50] pm8x41_get_is_cold_boot: cold boot
  60. [50] No 'frp' partition found
  61. [50] Not able to search the panel:
  62. [60] Display not enabled for 24 HW type
  63. [60] Target panel init not found!
  64. [60] pm8x41_get_is_cold_boot: cold boot
  65. [70] partition misc doesn't exist
  66. [70] error in emmc_recovery_init
  67. [70] Unable to locate /bootselect partition
  68. [80] No 'misc' partition found
  69. [80] Error reading MISC partition
  70. [80] failed to get ffbm cookie[90] use_signed_kernel=0, is_unlocked=0, is_tampered=0.
  71. [90] Loading boot image (15480832): start
  72. [220] Loading boot image (15480832): done
  73. [330] DTB Total entry: 15, DTB version: 2
  74. [330] Using DTB entry 0x000000f7/00000000/0x00010018/0 for device 0x000000f7/00010000/0x00010018/0
  75. [340] Using pmic info 0x2000b/0x0/0x0/0x0 for device 0x2000b/0x0/0x0/0x0
  76. [350] target_display_panel_node:510: hw_id=24 panel_name=""
  77. [360] cmdline: root=/dev/disk/by-partlabel/rootfs rw rootwait console=ttyMSM0,115200n8 androidboot.emmc=true androidboot.serialno=42fb6b22 androidboot.baseband=apq mdss_mdp.panel=0:dsi:0:
  78. [370] Updating device tree: start
  79. [440] Updating device tree: done
  80. [440] booting linux @ 0x80080000, ramdisk @ 0x82000000 (2854286), tags/device tree @ 0x81e00000
  81. [450] Jumping to kernel via monitor
  82. Booting Linux on physical CPU 0x0
  83. Initializing cgroup subsys cpu
  84. Linux version 4.3.0+ ([email protected]) (gcc version 4.8.2 20140110 (prerelease) [ibm/gcc-4_8-branch merged from gcc-4_8-branch, revision 205847] (Ubuntu/Linaro 4.8.2-13ubuntu1) ) #26 SMP PREEMPT Mon Dec 7 17:56:11 IST 2015
  85. CPU: AArch64 Processor [410fd030] revision 0
  86. Detected VIPT I-cache on CPU0
  87. alternatives: enabling workaround for ARM errata 826319, 827319, 824069
  88. alternatives: enabling workaround for ARM erratum 845719
  89. efi: Getting EFI parameters from FDT:
  90. efi: UEFI not found.
  91. cma: Reserved 64 MiB at 0x00000000bc000000
  92. PERCPU: Embedded 16 pages/cpu @ffffffc03bf51000 s27200 r8192 d30144 u65536
  93. Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 254464
  94. Kernel command line: root=/dev/disk/by-partlabel/rootfs rw rootwait console=ttyMSM0,115200n8 androidboot.emmc=true androidboot.serialno=42fb6b22 androidboot.baseband=apq mdss_mdp.panel=0:dsi:0:
  95. log_buf_len individual max cpu contribution: 4096 bytes
  96. log_buf_len total cpu_extra contributions: 12288 bytes
  97. log_buf_len min size: 16384 bytes
  98. log_buf_len: 32768 bytes
  99. early log buf free: 14716(89%)
  100. PID hash table entries: 4096 (order: 3, 32768 bytes)
  101. Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
  102. Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
  103. software IO TLB [mem 0xb6c00000-0xbac00000] (64MB) mapped at [ffffffc036c00000-ffffffc03abfffff]
  104. Memory: 855776K/1034240K available (7710K kernel code, 648K rwdata, 3240K rodata, 544K init, 13193K bss, 112928K reserved, 65536K cma-reserved)
  105. Virtual kernel memory layout:
  106.     vmalloc : 0xffffff8000000000 - 0xffffffbdbfff0000   (   246 GB)
  107.     vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000   (     8 GB maximum)
  108.               0xffffffbdc2000000 - 0xffffffbdc3000000   (    16 MB actual)
  109.     fixed   : 0xffffffbffa7fd000 - 0xffffffbffac00000   (  4108 KB)
  110.     PCI I/O : 0xffffffbffae00000 - 0xffffffbffbe00000   (    16 MB)
  111.     modules : 0xffffffbffc000000 - 0xffffffc000000000   (    64 MB)
  112.     memory  : 0xffffffc000000000 - 0xffffffc040000000   (  1024 MB)
  113.       .init : 0xffffffc000b34000 - 0xffffffc000bbc000   (   544 KB)
  114.       .text : 0xffffffc000080000 - 0xffffffc000b33b04   ( 10959 KB)
  115.       .data : 0xffffffc000bd1000 - 0xffffffc000c73000   (   648 KB)
  116. SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  117. Running RCU self tests
  118. Preemptible hierarchical RCU implementation.
  119.         RCU lockdep checking is enabled.
  120.         Build-time adjustment of leaf fanout to 64.
  121.         RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
  122. RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
  123. NR_IRQS:64 nr_irqs:64 0
  124. Architected cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
  125. clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
  126. sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
  127. Console: colour dummy device 80x25
  128. Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
  129. ... MAX_LOCKDEP_SUBCLASSES:  8
  130. ... MAX_LOCK_DEPTH:          48
  131. ... MAX_LOCKDEP_KEYS:        8191
  132. ... CLASSHASH_SIZE:          4096
  133. ... MAX_LOCKDEP_ENTRIES:     32768
  134. ... MAX_LOCKDEP_CHAINS:      65536
  135. ... CHAINHASH_SIZE:          32768
  136.  memory used by lock dependency info: 8159 kB
  137.  per task-struct memory footprint: 1920 bytes
  138. Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
  139. pid_max: default: 32768 minimum: 301
  140. Security Framework initialized
  141. Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
  142. Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes)
  143. Initializing cgroup subsys memory
  144. Initializing cgroup subsys hugetlb
  145. hw perfevents: enabled with arm/armv8-pmuv3 PMU driver, 7 counters available
  146. EFI services will not be available.
  147. CPU1: Booted secondary processor
  148. Detected VIPT I-cache on CPU1
  149. CPU2: Booted secondary processor
  150. Detected VIPT I-cache on CPU2
  151. CPU3: Booted secondary processor
  152. Detected VIPT I-cache on CPU3
  153. Brought up 4 CPUs
  154. SMP: Total of 4 processors activated.
  155. CPU: All CPU(s) started at EL1
  156. alternatives: patching kernel code
  157. devtmpfs: initialized
  158. DMI not present or invalid.
  159. clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  160. pinctrl core: initialized pinctrl subsystem
  161. NET: Registered protocol family 16
  162. cpuidle: using governor ladder
  163. cpuidle: using governor menu
  164. vdso: 2 pages (1 code @ ffffffc000bd9000, 1 data @ ffffffc000bd8000)
  165. hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  166. DMA: preallocated 256 KiB pool for atomic allocations
  167. Serial: AMBA PL011 UART driver
  168. qcom-smd soc:smd: new channel 'rpm_requests' info-size: 88 fifo-size: 1024
  169. irq: no irq domain found for /soc/wcnss-smp2p/slave-kernel !
  170. irq: no irq domain found for /soc/qcom,[email protected] !
  171. msm_iommu 1f00000.qcom,iommu: invalid resource
  172. msm_iommu 1f00000.qcom,iommu: iface: 100000000, core: 1066000000
  173. msm_iommu 1f00000.qcom,iommu: device gfx_iommu (model: 500) mapped at ffffff80003a0000, with 2 ctx banks
  174. genirq: Setting trigger mode 1 for irq 154 failed (gic_set_type+0x0/0x54)
  175. msm_iommu 1f00000.qcom,iommu: Request Global CFG IRQ 154 failed with ret=-22
  176. msm_iommu 1e00000.qcom,iommu: iface: 100000000, core: 1066000000
  177. msm_iommu 1e00000.qcom,iommu: device apps_iommu (model: 500) mapped at ffffff8000680000, with 20 ctx banks
  178. genirq: Setting trigger mode 1 for irq 154 failed (gic_set_type+0x0/0x54)
  179. msm_iommu 1e00000.qcom,iommu: Request Global CFG IRQ 154 failed with ret=-22
  180. msm_iommu_ctx 1f09000.qcom,iommu-ctx: context gfx3d_user using bank 1
  181. msm_iommu_ctx 1f0a000.qcom,iommu-ctx: context gfx3d_priv using bank 2
  182. msm_iommu_ctx 1e22000.qcom,iommu-ctx: context jpeg_enc0 using bank 2
  183. msm_iommu_ctx 1e23000.qcom,iommu-ctx: context vfe using bank 3
  184. msm_iommu_ctx 1e24000.qcom,iommu-ctx: context mdp_0 using bank 4
  185. msm_iommu_ctx 1e25000.qcom,iommu-ctx: context venus_ns using bank 5
  186. msm_iommu_ctx 1e26000.qcom,iommu-ctx: context cpp using bank 6
  187. msm_iommu_ctx 1e27000.qcom,iommu-ctx: context mDSP using bank 7
  188. msm_iommu_ctx 1e28000.qcom,iommu-ctx: context gss using bank 8
  189. msm_iommu_ctx 1e29000.qcom,iommu-ctx: context a2 using bank 9
  190. msm_iommu_ctx 1e32000.qcom,iommu-ctx: context mdp_1 using bank 18
  191. msm_iommu_ctx 1e33000.qcom,iommu-ctx: context venus_sec_pixel using bank 19
  192. msm_iommu_ctx 1e34000.qcom,iommu-ctx: context venus_sec_bitstream using bank 20
  193. msm_iommu_ctx 1e35000.qcom,iommu-ctx: context venus_sec_non_pixel using bank 21
  194. msm_iommu_ctx 1e36000.qcom,iommu-ctx: context venus_fw using bank 22
  195. msm_iommu_ctx 1e37000.qcom,iommu-ctx: context periph_rpm using bank 23
  196. msm_iommu_ctx 1e38000.qcom,iommu-ctx: context periph_CE using bank 24
  197. msm_iommu_ctx 1e39000.qcom,iommu-ctx: context periph_BLSP using bank 25
  198. msm_iommu_ctx 1e3a000.qcom,iommu-ctx: context periph_SDC1 using bank 26
  199. msm_iommu_ctx 1e3b000.qcom,iommu-ctx: context periph_SDC2 using bank 27
  200. msm_iommu_ctx 1e3c000.qcom,iommu-ctx: context periph_audio using bank 28
  201. msm_iommu_ctx 1e3d000.qcom,iommu-ctx: context periph_USB_HS1 using bank 29
  202. qcom_iommu: iommu sec: psize[0]: 94208, psize[1]: 0
  203. vgaarb: loaded
  204. SCSI subsystem initialized
  205. usbcore: registered new interface driver usbfs
  206. usbcore: registered new interface driver hub
  207. usbcore: registered new device driver usb
  208. Linux video capture interface: v2.00
  209. dmi: Firmware registration failed.
  210. Advanced Linux Sound Architecture Driver Initialized.
  211. Bluetooth: Core ver 2.20
  212. NET: Registered protocol family 31
  213. Bluetooth: HCI device and connection manager initialized
  214. Bluetooth: HCI socket layer initialized
  215. Bluetooth: L2CAP socket layer initialized
  216. Bluetooth: SCO socket layer initialized
  217. clocksource: Switched to clocksource arch_sys_counter
  218. NET: Registered protocol family 2
  219. TCP established hash table entries: 8192 (order: 4, 65536 bytes)
  220. TCP bind hash table entries: 8192 (order: 7, 524288 bytes)
  221. TCP: Hash tables configured (established 8192 bind 8192)
  222. UDP hash table entries: 512 (order: 4, 81920 bytes)
  223. UDP-Lite hash table entries: 512 (order: 4, 81920 bytes)
  224. NET: Registered protocol family 1
  225. RPC: Registered named UNIX socket transport module.
  226. RPC: Registered udp transport module.
  227. RPC: Registered tcp transport module.
  228. RPC: Registered tcp NFSv4.1 backchannel transport module.
  229. Unpacking initramfs...
  230. Freeing initrd memory: 2784K (ffffffc002000000 - ffffffc0022b8000)
  231. kvm [1]: HYP mode not available
  232. futex hash table entries: 1024 (order: 5, 131072 bytes)
  233. audit: initializing netlink subsys (disabled)
  234. audit: type=2000 audit(0.689:1): initialized
  235. HugeTLB registered 2 MB page size, pre-allocated 0 pages
  236. VFS: Disk quotas dquot_6.6.0
  237. VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  238. NFS: Registering the id_resolver key type
  239. Key type id_resolver registered
  240. Key type id_legacy registered
  241. fuse init (API version 7.23)
  242. 9p: Installing v9fs 9p2000 file system support
  243. io scheduler noop registered
  244. io scheduler cfq registered (default)
  245. Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
  246. msm_serial 78b0000.serial: msm_serial: detected port #0
  247. msm_serial 78b0000.serial: uartclk = 3686400
  248. 78b0000.serial: ttyMSM0 at MMIO 0x78b0000 (irq = 132, base_baud = 230400) is a MSM
  249. msm_serial: console setup on port #0
  250. console [ttyMSM0] enabled
  251. msm_serial: driver initialized
  252. [drm] Initialized drm 1.1.0 20060810
  253. l6: supplied by s4
  254. of_graph_get_next_endpoint(): no port node found in /soc/qcom,[email protected]
  255. 1a98000.qcom,mdss_dsi supply gdsc not found, using dummy regulator
  256. 1a98000.qcom,mdss_dsi supply gdsc not found, using dummy regulator
  257. l2: supplied by s3
  258. msm 1a00000.qcom,mdss_mdp: bound 1a98000.qcom,mdss_dsi (ops dsi_ops)
  259. msm 1a00000.qcom,mdss_mdp: bound 1c00000.qcom,adreno-3xx (ops a3xx_ops)
  260. 1a00000.qcom,mdss_mdp supply vdd not found, using dummy regulator
  261. [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
  262. [drm] No driver support for vblank timestamp query.
  263. msm 1a00000.qcom,mdss_mdp: No connectors reported connected with modes
  264. [drm] Cannot find any crtc or sizes - going 1024x768
  265. Leonid create framebuffer: dev=ffffffc036989000, mode_cmd=ffffffc036873988 ([email protected])Leonid create: FB ID: 29 (ffffffc035b07800)
  266. Console: switching to colour frame buffer device 128x48
  267. msm 1a00000.qcom,mdss_mdp: fb0: msm frame buffer device
  268. [drm] Initialized msm 1.0.0 20130625 on minor 0
  269. 1a98000.qcom,mdss_dsi.0 supply power not found, using dummy regulator
  270. loop: module loaded
  271. spmi spmi-0: PMIC Arb Version-2 (0x20010000)
  272. tun: Universal TUN/TAP device driver, 1.6
  273. tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
  274. sky2: driver version 1.30
  275. usbcore: registered new interface driver asix
  276. usbcore: registered new interface driver ax88179_178a
  277. usbcore: registered new interface driver cdc_ether
  278. usbcore: registered new interface driver dm9601
  279. usbcore: registered new interface driver net1080
  280. usbcore: registered new interface driver plusb
  281. usbcore: registered new interface driver cdc_subset
  282. usbcore: registered new interface driver zaurus
  283. usbcore: registered new interface driver cdc_ncm
  284. msm_otg 78d9000.phy: OTG regs = ffffff80003ba000
  285. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  286. ehci-pci: EHCI PCI platform driver
  287. ehci-platform: EHCI generic platform driver
  288. ehci-msm: Qualcomm On-Chip EHCI Host Controller
  289. msm_hsusb_host 78d9000.ehci: unable to find transceiver
  290. ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  291. ohci-pci: OHCI PCI platform driver
  292. ohci-platform: OHCI generic platform driver
  293. usbcore: registered new interface driver cdc_acm
  294. cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  295. usbcore: registered new interface driver usblp
  296. usbcore: registered new interface driver cdc_wdm
  297. usbcore: registered new interface driver uas
  298. usbcore: registered new interface driver usb-storage
  299. usbcore: registered new interface driver usbserial
  300. usbip_core: USB/IP Core v1.0.0
  301. usbcore: registered new device driver usbip-host
  302. usbip_host: USB/IP Host Driver v1.0.0
  303. mousedev: PS/2 mouse device common for all mice
  304. i2c /dev entries driver
  305. i2c_qup 78b6000.i2c:
  306.  tx channel not available
  307. i2c_qup 78b8000.i2c:
  308.  tx channel not available
  309. i2c_qup 78ba000.i2c:
  310.  tx channel not available
  311. l3: supplied by s3
  312. qcom-tsens 4a8000.thermal-sensor: tsens calibration failed
  313. Bluetooth: HCI UART driver ver 2.3
  314. Bluetooth: HCI UART protocol H4 registered
  315. Bluetooth: HCI UART protocol BCSP registered
  316. Bluetooth: HCI UART protocol Three-wire (H5) registered
  317. usbcore: registered new interface driver btusb
  318. sdhci: Secure Digital Host Controller Interface driver
  319. sdhci: Copyright(c) Pierre Ossman
  320. sdhci-pltfm: SDHCI platform and OF driver helper
  321. l5: supplied by s4
  322. sdhci_msm 7824900.sdhci: Failed getting OCR mask: 0
  323. mmc0: SDHCI controller on 7824900.sdhci [7824900.sdhci] using ADMA 64-bit
  324. sdhci_msm 7864900.sdhci: Got CD GPIO
  325. sdhci_msm 7864900.sdhci: Failed getting OCR mask: 0
  326. mmc1: SDHCI controller on 7864900.sdhci [7864900.sdhci] using ADMA 64-bit
  327. qcom-spmi-mpp 200f000.spmi:[email protected]0:[email protected]: function 'normal' not supported
  328. qcom-spmi-mpp 200f000.spmi:[email protected]0:[email protected]: invalid function normal in map table
  329. mmc0: MAN_BKOPS_EN bit is not set
  330. qcom-spmi-mpp 200f000.spmi:[email protected]0:[email protected]: function 'normal' not supported
  331. qcom-spmi-mpp 200f000.spmi:[email protected]0:[email protected]: invalid function normal in map table
  332. qcom-spmi-mpp 200f000.spmi:[email protected]0:[email protected]: function 'normal' not supported
  333. qcom-spmi-mpp 200f000.spmi:[email protected]0:[email protected]: invalid function normal in map table
  334. qcom-spmi-mpp 200f000.spmi:[email protected]0:[email protected]: does not have pin group gpio1
  335. qcom-spmi-mpp 200f000.spmi:[email protected]0:[email protected]: could not map group config for "gpio1"
  336. qcom-spmi-mpp 200f000.spmi:[email protected]0:[email protected]: function 'normal' not supported
  337. qcom-spmi-mpp 200f000.spmi:[email protected]0:[email protected]: invalid function normal in map table
  338. qcom-spmi-mpp 200f000.spmi:[email protected]0:[email protected]: does not have pin group gpio2
  339. qcom-spmi-mpp 200f000.spmi:[email protected]0:[email protected]: could not map group config for "gpio2"
  340. msm8916-pinctrl 1000000.pinctrl: pin GPIO_21 already requested by soc:leds; cannot claim for leds
  341. msm8916-pinctrl 1000000.pinctrl: pin-21 (leds) status -22
  342. msm8916-pinctrl 1000000.pinctrl: could not request pin 21 (GPIO_21) from group gpio21  on device 1000000.pinctrl
  343. leds-gpio leds: Error applying setting, reverse things back
  344. leds-gpio: probe of leds failed with error -2
  345. ledtrig-cpu: registered to indicate activity on CPUs
  346. usbcore: registered new interface driver usbhid
  347. usbhid: USB HID core driver
  348. l7: supplied by s4
  349. qcom-tz-pil soc:pronto_rproc: Found relocation area 6291456@0x000000008b600000
  350.  remoteproc0: soc:pronto_rproc is available
  351.  remoteproc0: Note: remoteproc is still under development and considered experimental.
  352.  remoteproc0: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed.
  353.  remoteproc0: Direct firmware load for wcnss.mdt failed with error -2
  354.  remoteproc0: failed to load soc:pronto_rproc
  355. msm8916-pinctrl 1000000.pinctrl: pin GPIO_121 already requested by soc:leds; cannot claim for usb-id
  356. msm8916-pinctrl 1000000.pinctrl: pin-121 (usb-id) status -22
  357. msm8916-pinctrl 1000000.pinctrl: could not request pin 121 (GPIO_121) from group gpio121  on device 1000000.pinctrl
  358. extcon-usb-gpio usb-id: Error applying setting, reverse things back
  359. coresight-tmc 825000.etf: TMC initialized
  360. coresight-tmc 826000.etr: TMC initialized
  361. coresight-tpiu 820000.tpiu: TPIU initialized
  362. coresight-funnel 821000.funnel: FUNNEL initialized
  363. coresight-funnel 841000.funnel: FUNNEL initialized
  364. coresight-etm4x 85c000.etm: ETM 4.0 initialized
  365. coresight-etm4x 85d000.etm: ETM 4.0 initialized
  366. coresight-etm4x 85e000.etm: ETM 4.0 initialized
  367. coresight-etm4x 85f000.etm: ETM 4.0 initialized
  368. coresight-replicator-qcom 824000.replicator: REPLICATOR 1.0 initialized
  369. apq8016-lpass-cpu 7708000.lpass-cpu: asoc_qcom_lpass_cpu_platform_probe() error getting mi2s-osr-clk: -2
  370. apq8016-lpass-cpu 7708000.lpass-cpu: asoc_qcom_lpass_cpu_platform_probe() error getting mi2s-osr-clk: -2
  371. apq8016-lpass-cpu 7708000.lpass-cpu: asoc_qcom_lpass_cpu_platform_probe() error getting mi2s-osr-clk: -2
  372. apq8016-lpass-cpu 7708000.lpass-cpu: asoc_qcom_lpass_cpu_platform_probe() error getting mi2s-osr-clk: -2
  373. spmi-wcd-codec 200f000.spmi:[email protected]1:[email protected]: msm8x16_wcd_codec_probe :PMIC REV: 1
  374. spmi-wcd-codec 200f000.spmi:[email protected]1:[email protected]: msm8x16_wcd_codec_probe :CODEC Version: 1
  375. spmi-wcd-codec 200f000.spmi:[email protected]1:[email protected]: ASoC: no source widget found for CDC_CONN
  376. spmi-wcd-codec 200f000.spmi:[email protected]1:[email protected]: ASoC: Failed to add route CDC_CONN -> direct -> RX_I2S_CLK
  377. spmi-wcd-codec 200f000.spmi:[email protected]1:[email protected]: ASoC: no source widget found for TX_I2S_CLK
  378. spmi-wcd-codec 200f000.spmi:[email protected]1:[email protected]: ASoC: Failed to add route TX_I2S_CLK -> direct -> I2S TX1
  379. spmi-wcd-codec 200f000.spmi:[email protected]1:[email protected]: ASoC: no source widget found for TX_I2S_CLK
  380. spmi-wcd-codec 200f000.spmi:[email protected]1:[email protected]: ASoC: Failed to add route TX_I2S_CLK -> direct -> I2S TX2
  381. spmi-wcd-codec 200f000.spmi:[email protected]1:[email protected]: ASoC: no source widget found for DEC1 MUX
  382. spmi-wcd-codec 200f000.spmi:[email protected]1:[email protected]: ASoC: Failed to add route DEC1 MUX -> direct -> I2S TX1
  383. spmi-wcd-codec 200f000.spmi:[email protected]1:[email protected]: ASoC: no source widget found for DEC2 MUX
  384. spmi-wcd-codec 200f000.spmi:[email protected]1:[email protected]: ASoC: Failed to add route DEC2 MUX -> direct -> I2S TX2
  385. spmi-wcd-codec 200f000.spmi:[email protected]1:[email protected]: ASoC: no source widget found for IIR1
  386. spmi-wcd-codec 200f000.spmi:[email protected]1:[email protected]: ASoC: Failed to add route IIR1 -> IIR1 -> RX1 MIX1 INP1
  387. spmi-wcd-codec 200f000.spmi:[email protected]1:[email protected]: ASoC: no source widget found for IIR1
  388. spmi-wcd-codec 200f000.spmi:[email protected]1:[email protected]: ASoC: Failed to add route IIR1 -> IIR1 -> RX1 MIX1 INP2
  389. spmi-wcd-codec 200f000.spmi:[email protected]1:[email protected]: ASoC: no source widget found for IIR1
  390. spmi-wcd-codec 200f000.spmi:[email protected]1:[email protected]: ASoC: Failed to add route IIR1 -> IIR1 -> RX2 MIX1 INP1
  391. spmi-wcd-codec 200f000.spmi:[email protected]1:[email protected]: ASoC: no source widget found for IIR1
  392. spmi-wcd-codec 200f000.spmi:[email protected]1:[email protected]: ASoC: Failed to add route IIR1 -> IIR1 -> RX2 MIX1 INP2
  393. spmi-wcd-codec 200f000.spmi:[email protected]1:[email protected]: ASoC: no source widget found for IIR1
  394. spmi-wcd-codec 200f000.spmi:[email protected]1:[email protected]: ASoC: Failed to add route IIR1 -> IIR1 -> RX3 MIX1 INP1
  395. spmi-wcd-codec 200f000.spmi:[email protected]1:[email protected]: ASoC: no source widget found for IIR1
  396. spmi-wcd-codec 200f000.spmi:[email protected]1:[email protected]: ASoC: Failed to add route IIR1 -> IIR1 -> RX3 MIX1 INP2
  397. spmi-wcd-codec 200f000.spmi:[email protected]1:[email protected]: ASoC: no source widget found for IIR1
  398. spmi-wcd-codec 200f000.spmi:[email protected]1:[email protected]: ASoC: Failed to add route IIR1 -> IIR1 -> RX1 MIX2 INP1
  399. spmi-wcd-codec 200f000.spmi:[email protected]1:[email protected]: ASoC: no source widget found for IIR1
  400. spmi-wcd-codec 200f000.spmi:[email protected]1:[email protected]: ASoC: Failed to add route IIR1 -> IIR1 -> RX2 MIX2 INP1
  401. spmi-wcd-codec 200f000.spmi:[email protected]1:[email protected]: ASoC: no source widget found for DMIC1
  402. spmi-wcd-codec 200f000.spmi:[email protected]1:[email protected]: ASoC: Failed to add route DMIC1 -> DMIC1 -> DEC1 MUX
  403. spmi-wcd-codec 200f000.spmi:[email protected]1:[email protected]: ASoC: no source widget found for DMIC2
  404. spmi-wcd-codec 200f000.spmi:[email protected]1:[email protected]: ASoC: Failed to add route DMIC2 -> DMIC2 -> DEC1 MUX
  405. spmi-wcd-codec 200f000.spmi:[email protected]1:[email protected]: ASoC: no source widget found for ADC1
  406. spmi-wcd-codec 200f000.spmi:[email protected]1:[email protected]: ASoC: Failed to add route ADC1 -> ADC1 -> DEC1 MUX
  407. spmi-wcd-codec 200f000.spmi:[email protected]1:[email protected]: ASoC: no source widget found for ADC2
  408. spmi-wcd-codec 200f000.spmi:[email protected]1:[email protected]: ASoC: Failed to add route ADC2 -> ADC2 -> DEC1 MUX
  409. spmi-wcd-codec 200f000.spmi:[email protected]1:[email protected]: ASoC: no source widget found for ADC3
  410. spmi-wcd-codec 200f000.spmi:[email protected]1:[email protected]: ASoC: Failed to add route ADC3 -> ADC3 -> DEC1 MUX
  411. spmi-wcd-codec 200f000.spmi:[email protected]1:[email protected]: ASoC: no source widget found for CDC_CONN
  412. spmi-wcd-codec 200f000.spmi:[email protected]1:[email protected]: ASoC: Failed to add route CDC_CONN -> direct -> DEC1 MUX
  413. spmi-wcd-codec 200f000.spmi:[email protected]1:[email protected]: ASoC: no source widget found for DMIC1
  414. spmi-wcd-codec 200f000.spmi:[email protected]1:[email protected]: ASoC: Failed to add route DMIC1 -> DMIC1 -> DEC2 MUX
  415. spmi-wcd-codec 200f000.spmi:[email protected]1:[email protected]: ASoC: no source widget found for DMIC2
  416. spmi-wcd-codec 200f000.spmi:[email protected]1:[email protected]: ASoC: Failed to add route DMIC2 -> DMIC2 -> DEC2 MUX
  417. spmi-wcd-codec 200f000.spmi:[email protected]1:[email protected]: ASoC: no source widget found for ADC1
  418. spmi-wcd-codec 200f000.spmi:[email protected]1:[email protected]: ASoC: Failed to add route ADC1 -> ADC1 -> DEC2 MUX
  419. spmi-wcd-codec 200f000.spmi:[email protected]1:[email protected]: ASoC: no source widget found for ADC2
  420. spmi-wcd-codec 200f000.spmi:[email protected]1:[email protected]: ASoC: Failed to add route ADC2 -> ADC2 -> DEC2 MUX
  421. spmi-wcd-codec 200f000.spmi:[email protected]1:[email protected]: ASoC: no source widget found for ADC3
  422. spmi-wcd-codec 200f000.spmi:[email protected]1:[email protected]: ASoC: Failed to add route ADC3 -> ADC3 -> DEC2 MUX
  423. spmi-wcd-codec 200f000.spmi:[email protected]1:[email protected]: ASoC: no source widget found for CDC_CONN
  424. spmi-wcd-codec 200f000.spmi:[email protected]1:[email protected]: ASoC: Failed to add route CDC_CONN -> direct -> DEC2 MUX
  425. spmi-wcd-codec 200f000.spmi:[email protected]1:[email protected]: ASoC: no source widget found for ADC2 MUX
  426. spmi-wcd-codec 200f000.spmi:[email protected]1:[email protected]: ASoC: Failed to add route ADC2 MUX -> direct -> ADC2
  427. spmi-wcd-codec 200f000.spmi:[email protected]1:[email protected]: ASoC: no source widget found for ADC2 MUX
  428. spmi-wcd-codec 200f000.spmi:[email protected]1:[email protected]: ASoC: Failed to add route ADC2 MUX -> direct -> ADC3
  429. spmi-wcd-codec 200f000.spmi:[email protected]1:[email protected]: ASoC: no source widget found for ADC2_INP2
  430. spmi-wcd-codec 200f000.spmi:[email protected]1:[email protected]: ASoC: Failed to add route ADC2_INP2 -> INP2 -> ADC2 MUX
  431. spmi-wcd-codec 200f000.spmi:[email protected]1:[email protected]: ASoC: no source widget found for ADC2_INP3
  432. spmi-wcd-codec 200f000.spmi:[email protected]1:[email protected]: ASoC: Failed to add route ADC2_INP3 -> INP3 -> ADC2 MUX
  433. spmi-wcd-codec 200f000.spmi:[email protected]1:[email protected]: ASoC: no source widget found for AMIC1
  434. spmi-wcd-codec 200f000.spmi:[email protected]1:[email protected]: ASoC: Failed to add route AMIC1 -> direct -> ADC1
  435. spmi-wcd-codec 200f000.spmi:[email protected]1:[email protected]: ASoC: no source widget found for AMIC2
  436. spmi-wcd-codec 200f000.spmi:[email protected]1:[email protected]: ASoC: Failed to add route AMIC2 -> direct -> ADC2_INP2
  437. spmi-wcd-codec 200f000.spmi:[email protected]1:[email protected]: ASoC: no source widget found for AMIC3
  438. spmi-wcd-codec 200f000.spmi:[email protected]1:[email protected]: ASoC: Failed to add route AMIC3 -> direct -> ADC2_INP3
  439. spmi-wcd-codec 200f000.spmi:[email protected]1:[email protected]: ASoC: no source widget found for IIR1 INP1 MUX
  440. spmi-wcd-codec 200f000.spmi:[email protected]1:[email protected]: ASoC: Failed to add route IIR1 INP1 MUX -> direct -> IIR1
  441. spmi-wcd-codec 200f000.spmi:[email protected]1:[email protected]: ASoC: no source widget found for DEC1 MUX
  442. spmi-wcd-codec 200f000.spmi:[email protected]1:[email protected]: ASoC: Failed to add route DEC1 MUX -> DEC1 -> IIR1 INP1 MUX
  443. spmi-wcd-codec 200f000.spmi:[email protected]1:[email protected]: ASoC: no source widget found for DEC2 MUX
  444. spmi-wcd-codec 200f000.spmi:[email protected]1:[email protected]: ASoC: Failed to add route DEC2 MUX -> DEC2 -> IIR1 INP1 MUX
  445. spmi-wcd-codec 200f000.spmi:[email protected]1:[email protected]: ASoC: no sink widget found for MIC BIAS Internal1
  446. spmi-wcd-codec 200f000.spmi:[email protected]1:[email protected]: ASoC: Failed to add route INT_LDO_H -> direct -> MIC BIAS Internal1
  447. spmi-wcd-codec 200f000.spmi:[email protected]1:[email protected]: ASoC: no sink widget found for MIC BIAS Internal2
  448. spmi-wcd-codec 200f000.spmi:[email protected]1:[email protected]: ASoC: Failed to add route INT_LDO_H -> direct -> MIC BIAS Internal2
  449. spmi-wcd-codec 200f000.spmi:[email protected]1:[email protected]: ASoC: no sink widget found for MIC BIAS External
  450. spmi-wcd-codec 200f000.spmi:[email protected]1:[email protected]: ASoC: Failed to add route INT_LDO_H -> direct -> MIC BIAS External
  451. spmi-wcd-codec 200f000.spmi:[email protected]1:[email protected]: ASoC: no sink widget found for MIC BIAS External2
  452. spmi-wcd-codec 200f000.spmi:[email protected]1:[email protected]: ASoC: Failed to add route INT_LDO_H -> direct -> MIC BIAS External2
  453. spmi-wcd-codec 200f000.spmi:[email protected]1:[email protected]: ASoC: no source widget found for MICBIAS_REGULATOR
  454. spmi-wcd-codec 200f000.spmi:[email protected]1:[email protected]: ASoC: Failed to add route MICBIAS_REGULATOR -> direct -> MIC BIAS Internal1
  455. spmi-wcd-codec 200f000.spmi:[email protected]1:[email protected]: ASoC: no source widget found for MICBIAS_REGULATOR
  456. spmi-wcd-codec 200f000.spmi:[email protected]1:[email protected]: ASoC: Failed to add route MICBIAS_REGULATOR -> direct -> MIC BIAS Internal2
  457. spmi-wcd-codec 200f000.spmi:[email protected]1:[email protected]: ASoC: no source widget found for MICBIAS_REGULATOR
  458. spmi-wcd-codec 200f000.spmi:[email protected]1:[email protected]: ASoC: Failed to add route MICBIAS_REGULATOR -> direct -> MIC BIAS External
  459. spmi-wcd-codec 200f000.spmi:[email protected]1:[email protected]: ASoC: no source widget found for MICBIAS_REGULATOR
  460. spmi-wcd-codec 200f000.spmi:[email protected]1:[email protected]: ASoC: Failed to add route MICBIAS_REGULATOR -> direct -> MIC BIAS External2
  461. qcom-apq8016-sbc 7702000.sound: msm8x16_wcd_i2s_rx1 <-> Primary MI2S mapping ok
  462. spmi-wcd-codec 200f000.spmi:[email protected]1:[email protected]: ASoC: mux RX2 MIX1 INP3 has no paths
  463. spmi-wcd-codec 200f000.spmi:[email protected]1:[email protected]: ASoC: mux RX3 MIX1 INP3 has no paths
  464. spmi-wcd-codec 200f000.spmi:[email protected]1:[email protected]: ASoC: mux RX1 MIX2 INP1 has no paths
  465. spmi-wcd-codec 200f000.spmi:[email protected]1:[email protected]: ASoC: mux RX2 MIX2 INP1 has no paths
  466. NET: Registered protocol family 17
  467. Bluetooth: RFCOMM TTY layer initialized
  468. Bluetooth: RFCOMM socket layer initialized
  469. Bluetooth: RFCOMM ver 1.11
  470. Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  471. Bluetooth: HIDP socket layer initialized
  472. 9pnet: Installing 9P2000 support
  473. Key type dns_resolver registered
  474. registered taskstats version 1
  475. 1a98000.qcom,mdss_dsi.0 supply power not found, using dummy regulator
  476. Leonid Calling mipi dsi attach
  477. Leonid ops return 0
  478. msm_otg 78d9000.phy: OTG regs = ffffff8000532000
  479. msm_otg 78d9000.phy: no vddcx
  480. mmc0: new high speed MMC card at address 0001
  481. mmcblk0: mmc0:0001 P1J95K 7.29 GiB
  482. mmcblk0boot0: mmc0:0001 P1J95K partition 1 2.00 MiB
  483. mmcblk0boot1: mmc0:0001 P1J95K partition 2 2.00 MiB
  484. mmcblk0rpmb: mmc0:0001 P1J95K partition 3 2.00 MiB
  485.  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10
  486. CPR closed loop is enabled
  487. CPR is enabled!
  488. of_cpumask_init_opp_table: couldn't find opp table for cpu:0, -19
  489. hctosys: unable to open rtc device (rtc0)
  490. ALSA device list:
  491.   Freeing unused kernel memory: 544K (ffffffc000b34000 - ffffffc000bbc000)
  492. Freeing alternatives memory: 60K (ffffffc000bbc000 - ffffffc000bcb000)
  493. Loading, please wait...
  494. starting version 219
  495. random: systemd-udevd urandom read with 4 bits of entropy available
  496. Begin: Loading essential drivers ... done.
  497. Begin: Running /scripts/init-premount ... done.
  498. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
  499. Begin: Running /scripts/local-premount ... done.
  500. EXT4-fs (mmcblk0p10): recovery complete
  501. EXT4-fs (mmcblk0p10): mounted filesystem with ordered data mode. Opts: (null)
  502. Begin: Running /scripts/local-bottom ... done.
  503. done.
  504. Begin: Running /scripts/init-bottom ... done.
  505. systemd[1]: systemd 225 running in system mode. (+PAM -AUDIT -SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
  506. syó
  507. Welcome to OpenEmbedded nodistro.0!
  508.  
  509. systemd[1]: Set hostname to <dragonboard-410c>.
  510. systemd[1]ú[  OK  ] Started Forward Password Requests to Wall Directory Watch.
  511. systemü[  OK  ] Started Dispatch Password Requests to Console Directory Watch.
  512. system[  OK  ] Reached target Swap.
  513. system[  OK  ] Created slice Root Slice.
  514. systeí[  OK  ] Listening on udev Kernel Socket.
  515. system[  OK  ] Created slice User and Session Slice.
  516. systeí[  OK  ] Listening on Journal Socket (/dev/log).
  517. systeí[  OK  ] Listening on udev Control Socket.
  518. systeí[  OK  ] Listening on /dev/initctl Compatibility Named Pipe.
  519. systeý[  OK  ] Listening on Journal Socket.
  520. systeí[  OK  ] Created slice System Slice.
  521. systemd[1]: Mountingþ         Mounting FUSE Control File System...
  522. systemd[1]: Mounting Temporary Directory...
  523.          Mounting Temporary Directory...
  524. systemd[1]: Reachõ[  OK  ] Reached target Slices.
  525. systemd[1]: Starting Apply Kernel          Starting Apply Kernel Variables...
  526. systemd[1]: Starting Setup Virtuý         Starting Setup Virtual Console...
  527. systemd[1]: Starting Remount Root and Kernel          Starting Remount Root and Kernel File Systems...
  528. EXT4-fs (mmcblk0p10): re-mounted. Opts: (null)
  529. systemd[1]: Creaô[  OK  ] Created slice system-getty.slice.
  530. systemd[1]: Lý[  OK  ] Listening on Syslog Socket.
  531. systemd[1]: C[  OK  ] Created slice system-serial\x2dgetty.slice.
  532. systemd[1]: Mountin÷         Mounting POSIX Message Queue File System...
  533. systemd[1]: Mountingþ         Mounting Huge Pages File System...
  534. systemd[1]: Listå[  OK  ] Listening on networkd rtnetlink socket.
  535. systemd[1]: Liÿ[  OK  ] Listening on Journal Audit Socket.
  536. systemd[1]: Startinÿ         Starting Journal Service...
  537. systemd[1]: Mounting Debug File System...
  538.          Mounting Debug File System...
  539. systemd[1]: Reacþ[  OK  ] Reached target Paths.
  540. systemd[1]: Mouþ[  OK  ] Mounted Debug File System.
  541. systemd[1]: Moõ[  OK  ] Mounted Huge Pages File System.
  542. systemd[1]: Mouÿ[  OK  ] Mounted POSIX Message Queue File System.
  543. systemd[1]: Moõ[  OK  ] Mounted FUSE Control File System.
  544. systemd[1]: Moõ[  OK  ] Mounted Temporary Directory.
  545. systemd[1]: Staþ[  OK  ] Started Journal Service.
  546. [  OK  ] Started Apply Kernel Variables.
  547. [  OK  ] Started Setup Virtual Console.
  548. [  OK  ] Started Remount Root and Kernel File Systems.
  549.          Starting Create Static Device Nodes in /dev...
  550.          Starting udev Coldplug all Devices...
  551.          Starting Flush Journal to Persistent Storage...
  552. [  OK  ] Started Create Static Device Nodes in /dev.
  553. systemd-journald[1222]: Received request to flush runtime journal from PID 1
  554. [  OK  ] Started Flush Journal to Persistent Storage.
  555. [  OK  ] Reached target Local File Systems (Pre).
  556.          Mounting /var/volatile...
  557.          Starting udev Kernel Device Manager...
  558. [  OK  ] Mounted /var/volatile.
  559. [  OK  ] Started udev Kernel Device Manager.
  560. [  OK  ] Reached target Local File Systems.
  561.          Starting Create Volatile Files and Directories...
  562.          Starting Load/Save Random Seed...
  563. [  OK  ] Started Create Volatile Files and Directories.
  564. [  OK  ] Started Load/Save Random Seed.
  565.          Starting Network Time Synchronization...
  566.          Starting Update UTMP about System Boot/Shutdown...
  567. [  OK  ] Started Network Time Synchronization.
  568. [  OK  ] Reached target System Time Synchronized.
  569. [  OK  ] Started Update UTMP about System Boot/Shutdown.
  570. [  OK  ] Found device /dev/ttyMSM0.
  571. [  OK  ] Reached target Sound Card.
  572. [  OK  ] Created slice system-systemd\x2dbacklight.slice.
  573.          Starting Load/Save Screen Backlight...ss of backlight:soc:backlight...
  574. [  OK  ] Started udev Coldplug all Devices.
  575. [  OK  ] Started Load/Save Screen Backlight ...ness of backlight:soc:backlight.
  576. [  OK  ] Reached target System Initialization.
  577. [  OK  ] Started Daily Cleanup of Temporary Directories.
  578. [  OK  ] Reached target Timers.
  579. [  OK  ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
  580.          Starting Restore Sound Card State...
  581. [  OK  ] Listening on RPCbind Server Activation Socket.
  582. [  OK  ] Listening on dropbear.socket.
  583. [  OK  ] Listening on D-Bus System Message Bus Socket.
  584. [  OK  ] Reached target Sockets.
  585. [  OK  ] Reached target Basic System.
  586. [  OK  ] Started D-Bus System Message Bus.
  587.          Starting Network Service...
  588.          Starting Connection service...
  589.          Starting Avahi mDNS/DNS-SD Stack...
  590.          Starting Login Service...
  591. [  OK  ] Started System Logging Service.
  592. [  OK  ] Started Kernel Logging Service.
  593.          Starting Telephony service...
  594. [  OK  ] Started Network Service.
  595. [  OK  ] Started Restore Sound Card State.
  596. [  OK  ] Started Avahi mDNS/DNS-SD Stack.
  597. [  OK  ] Started Telephony service.
  598. [  OK  ] Started Login Service.
  599. [  OK  ] Started Connection service.
  600. [  OK  ] Reached target Remote File Systems (Pre).
  601. [  OK  ] Reached target Remote File Systems.
  602.          Starting Permit User Sessions...
  603.          Starting Bluetooth service...
  604. [  OK  ] Reached target Network.
  605.          Starting Network Name Resolution...
  606. [  OK  ] Started Permit User Sessions.
  607. [  OK  ] Started Network Name Resolution.
  608. [  OK  ] Started Bluetooth service.
  609.          Starting Hostname Service...
  610.          Starting WPA supplicant...
  611. [  OK  ] Started Getty on tty1.
  612. [  OK  ] Started Serial Getty on ttyMSM0.
  613. [  OK  ] Reached target Login Prompts.
  614. [  OK  ] Reached target Multi-User System.
  615.          Starting Update UTMP about System Runlevel Changes...
  616. [FAILED] Failed to start Hostname Service.
  617. See 'systemctl status systemd-hostnamed.service' for details.
  618. [  OK  ] Started WPA supplicant.
  619. [  OK  ] Started Update UTMP about System Runlevel Changes.
  620.  
  621. OpenEmbedded nodistro.0 dragonboard-410c ttyMSM0
  622.  
  623. dragonboard-410c login:

advertising

Update the Post

Either update this post and resubmit it with changes, or make a new post.

You may also comment on this post.

update paste below
details of the post (optional)

Note: Only the paste content is required, though the following information can be useful to others.

Save name / title?

(space separated, optional)



Please note that information posted here will not expire by default. If you do not want it to expire, please set the expiry time above. If it is set to expire, web search engines will not be allowed to index it prior to it expiring. Items that are not marked to expire will be indexable by search engines. Be careful with your passwords. All illegal activities will be reported and any information will be handed over to the authorities, so be good.

comments powered by Disqus
worth-right