Advertising
- Anonymous
- Saturday, January 13th, 2007 at 10:43:33pm UTC
- [17179569.184000] ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x7fff3040
- [17179569.184000] ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x7fff30c0
- [17179569.184000] ACPI: SRAT (v001 AMD HAMMER 0x00000001 AMD 0x00000001) @ 0x7fff9900
- [17179569.184000] ACPI: MCFG (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x7fff9a00
- [17179569.184000] ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x7fff9840
- [17179569.184000] ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000
- [17179569.184000] ACPI: PM-Timer IO Port: 0x4008
- [17179569.184000] ACPI: Local APIC address 0xfee00000
- [17179569.184000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
- [17179569.184000] Processor #0 15:3 APIC version 16
- [17179569.184000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
- [17179569.184000] Processor #1 15:3 APIC version 16
- [17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
- [17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
- [17179569.184000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
- [17179569.184000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
- [17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
- [17179569.184000] ACPI: BIOS IRQ0 pin2 override ignored.
- [17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
- [17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
- [17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
- [17179569.184000] ACPI: IRQ9 used by override.
- [17179569.184000] ACPI: IRQ14 used by override.
- [17179569.184000] ACPI: IRQ15 used by override.
- [17179569.184000] Enabling APIC mode: Flat. Using 1 I/O APICs
- [17179569.184000] Using ACPI (MADT) for SMP configuration information
- [17179569.184000] Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
- [17179569.184000] Built 1 zonelists
- [17179569.184000] Kernel command line: root=/dev/sda2 ro quiet splash
- [17179569.184000] mapped APIC to ffffd000 (fee00000)
- [17179569.184000] mapped IOAPIC to ffffc000 (fec00000)
- [17179569.184000] Enabling fast FPU save and restore... done.
- [17179569.184000] Enabling unmasked SIMD FPU exception support... done.
- [17179569.184000] Initializing CPU#0
- [17179569.184000] PID hash table entries: 4096 (order: 12, 16384 bytes)
- [17179569.184000] Detected 1809.440 MHz processor.
- [17179569.184000] Using pmtmr for high-res timesource
- [17179569.184000] Console: colour VGA+ 80x25
- [17179571.932000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
- [17179571.932000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
- [17179571.992000] Memory: 2069340k/2097088k available (1910k kernel code, 26340k reserved, 1069k data, 308k init, 1179584k highmem)
- [17179571.992000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
- [17179572.076000] Calibrating delay using timer specific routine.. 3622.73 BogoMIPS (lpj=7245472)
- [17179572.076000] Security Framework v1.0.0 initialized
- [17179572.076000] SELinux: Disabled at boot.
- [17179572.076000] Mount-cache hash table entries: 512
- [17179572.076000] CPU: After generic identify, caps: 178bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000003
- [17179572.076000] CPU: After vendor identify, caps: 178bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000003
- [17179572.076000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
- [17179572.076000] CPU: L2 Cache: 1024K (64 bytes/line)
- [17179572.076000] CPU 0(2) -> Core 0
- [17179572.076000] CPU: After all inits, caps: 178bfbff e3d3fbff 00000000 00000410 00000001 00000000 00000003
- [17179572.076000] Checking 'hlt' instruction... OK.
- [17179572.092000] SMP alternatives: switching to UP code
- [17179572.092000] checking if image is initramfs... it is
- [17179572.580000] Freeing initrd memory: 5321k freed
- [17179572.580000] ACPI: Core revision 20060707
- [17179572.580000] ACPI: Looking for DSDT ... not found!
- [17179572.584000] CPU0: AMD Dual Core AMD Opteron(tm) Processor 165 stepping 02
- [17179572.584000] SMP alternatives: switching to SMP code
- [17179572.584000] Booting processor 1/1 eip 3000
- [17179572.596000] Initializing CPU#1
- [17179572.676000] Calibrating delay using timer specific routine.. 3618.85 BogoMIPS (lpj=7237705)
- [17179572.676000] CPU: After generic identify, caps: 178bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000003
- [17179572.676000] CPU: After vendor identify, caps: 178bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000003
- [17179572.676000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
- [17179572.676000] CPU: L2 Cache: 1024K (64 bytes/line)
- [17179572.676000] CPU 1(2) -> Core 1
- [17179572.676000] CPU: After all inits, caps: 178bfbff e3d3fbff 00000000 00000410 00000001 00000000 00000003
- [17179572.676000] CPU1: AMD Dual Core AMD Opteron(tm) Processor 165 stepping 02
- [17179572.676000] Total of 2 processors activated (7241.58 BogoMIPS).
- [17179572.676000] ENABLING IO-APIC IRQs
- [17179572.676000] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
- [17179572.824000] checking TSC synchronization across 2 CPUs:
- [17179572.828000] Brought up 2 CPUs
- [17179572.864000] migration_cost=4000
- [17179572.864000] NET: Registered protocol family 16
- [17179572.864000] EISA bus registered
- [17179572.864000] ACPI: bus type pci registered
- [17179572.864000] PCI: Using MMCONFIG
- [17179572.864000] PCI: No mmconfig possible on 0:18
- [17179572.864000] Setting up standard PCI resources
- [17179572.876000] ACPI: Interpreter enabled
- [17179572.876000] ACPI: Using IOAPIC for interrupt routing
- [17179572.876000] ACPI: PCI Root Bridge [PCI0] (0000:00)
- [17179572.876000] PCI: Probing PCI hardware (bus 00)
- [17179572.880000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:06.0
- [17179572.880000] PCI: Transparent bridge - 0000:00:09.0
- [17179572.880000] Boot video device is 0000:01:00.0
- [17179572.880000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
- [17179572.960000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
- [17179572.960000] ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 7 9 10 11 12 14 15)
- [17179572.960000] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 *5 7 9 10 11 12 14 15)
- [17179572.960000] ACPI: PCI Interrupt Link [LNK3] (IRQs *3 4 5 7 9 10 11 12 14 15)
- [17179572.964000] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
- [17179572.964000] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
- [17179572.964000] ACPI: PCI Interrupt Link [LUBA] (IRQs *3 4 5 7 9 10 11 12 14 15)
- [17179572.964000] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
- [17179572.964000] ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 7 9 10 11 *12 14 15)
- [17179572.964000] ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 7 9 10 *11 12 14 15)
- [17179572.964000] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
- [17179572.964000] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 7 9 10 11 *12 14 15)
- [17179572.964000] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 7 9 10 *11 12 14 15)
- [17179572.964000] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
- [17179572.964000] ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 10 *11 12 14 15)
- [17179572.964000] ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 *5 7 9 10 11 12 14 15)
- [17179572.968000] ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
- [17179572.968000] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
- [17179572.968000] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
- [17179572.968000] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
- [17179572.968000] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
- [17179572.968000] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
- [17179572.968000] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled.
- [17179572.968000] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
- [17179572.968000] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled.
- [17179572.968000] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled.
- [17179572.968000] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
- [17179572.972000] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled.
- [17179572.972000] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled.
- [17179572.972000] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
- [17179572.972000] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled.
- [17179572.972000] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled.
- [17179572.972000] ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled.
- [17179572.976000] Linux Plug and Play Support v0.97 (c) Adam Belay
- [17179572.976000] pnp: PnP ACPI init
- [17179572.980000] pnp: PnP ACPI: found 14 devices
- [17179572.980000] PnPBIOS: Disabled by ACPI PNP
- [17179572.980000] PCI: Using ACPI for IRQ routing
- [17179572.980000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
- [17179572.984000] pnp: 00:01: ioport range 0x4000-0x407f could not be reserved
- [17179572.984000] pnp: 00:01: ioport range 0x4080-0x40ff has been reserved
- [17179572.984000] pnp: 00:01: ioport range 0x4400-0x447f has been reserved
- [17179572.984000] pnp: 00:01: ioport range 0x4480-0x44ff could not be reserved
- [17179572.984000] pnp: 00:01: ioport range 0x4800-0x487f has been reserved
- [17179572.984000] pnp: 00:01: ioport range 0x4880-0x48ff has been reserved
- [17179572.984000] PCI: Bridge: 0000:00:09.0
- [17179572.984000] IO window: a000-afff
- [17179572.984000] MEM window: d3000000-d4ffffff
- [17179572.984000] PREFETCH window: 88000000-880fffff
- [17179572.984000] PCI: Bridge: 0000:00:0b.0
- [17179572.984000] IO window: disabled.
- [17179572.984000] MEM window: disabled.
- [17179572.984000] PREFETCH window: disabled.
- [17179572.984000] PCI: Bridge: 0000:00:0c.0
- [17179572.984000] IO window: disabled.
- [17179572.984000] MEM window: disabled.
- [17179572.984000] PREFETCH window: disabled.
- [17179572.984000] PCI: Bridge: 0000:00:0d.0
- [17179572.984000] IO window: disabled.
- [17179572.984000] MEM window: disabled.
- [17179572.984000] PREFETCH window: disabled.
- [17179572.984000] PCI: Bridge: 0000:00:0e.0
- [17179572.984000] IO window: disabled.
- [17179572.984000] MEM window: d0000000-d2ffffff
- [17179572.984000] PREFETCH window: c0000000-cfffffff
- [17179572.984000] PCI: Setting latency timer of device 0000:00:09.0 to 64
- [17179572.984000] PCI: Setting latency timer of device 0000:00:0b.0 to 64
- [17179572.984000] PCI: Setting latency timer of device 0000:00:0c.0 to 64
- [17179572.984000] PCI: Setting latency timer of device 0000:00:0d.0 to 64
- [17179572.984000] PCI: Setting latency timer of device 0000:00:0e.0 to 64
- [17179572.984000] NET: Registered protocol family 2
- [17179573.024000] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
- [17179573.024000] TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
- [17179573.024000] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
- [17179573.024000] TCP: Hash tables configured (established 262144 bind 65536)
- [17179573.024000] TCP reno registered
- [17179573.024000] audit: initializing netlink socket (disabled)
- [17179573.024000] audit(1168720290.024:1): initialized
- [17179573.024000] highmem bounce pool size: 64 pages
- [17179573.024000] VFS: Disk quotas dquot_6.5.1
- [17179573.024000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- [17179573.024000] Initializing Cryptographic API
- [17179573.024000] io scheduler noop registered
- [17179573.024000] io scheduler anticipatory registered
- [17179573.024000] io scheduler deadline registered
- [17179573.024000] io scheduler cfq registered (default)
- [17179573.024000] PCI: Setting latency timer of device 0000:00:0b.0 to 64
- [17179573.024000] pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
- [17179573.024000] assign_interrupt_mode Found MSI capability
- [17179573.024000] Allocate Port Service[0000:00:0b.0:pcie00]
- [17179573.024000] Allocate Port Service[0000:00:0b.0:pcie03]
- [17179573.024000] PCI: Setting latency timer of device 0000:00:0c.0 to 64
- [17179573.024000] pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
- [17179573.024000] assign_interrupt_mode Found MSI capability
- [17179573.024000] Allocate Port Service[0000:00:0c.0:pcie00]
- [17179573.024000] Allocate Port Service[0000:00:0c.0:pcie03]
- [17179573.024000] PCI: Setting latency timer of device 0000:00:0d.0 to 64
- [17179573.024000] pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
- [17179573.024000] assign_interrupt_mode Found MSI capability
- [17179573.024000] Allocate Port Service[0000:00:0d.0:pcie00]
- [17179573.024000] Allocate Port Service[0000:00:0d.0:pcie03]
- [17179573.024000] PCI: Setting latency timer of device 0000:00:0e.0 to 64
- [17179573.024000] pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
- [17179573.024000] assign_interrupt_mode Found MSI capability
- [17179573.024000] Allocate Port Service[0000:00:0e.0:pcie00]
- [17179573.024000] Allocate Port Service[0000:00:0e.0:pcie03]
- [17179573.024000] isapnp: Scanning for PnP cards...
- [17179573.380000] isapnp: No Plug & Play device found
- [17179573.396000] Real Time Clock Driver v1.12ac
- [17179573.396000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
- [17179573.396000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
- [17179573.400000] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
- [17179573.400000] mice: PS/2 mouse device common for all mice
- [17179573.400000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
- [17179573.400000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
- [17179573.400000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
- [17179573.400000] PNP: No PS/2 controller found. Probing ports directly.
- [17179573.400000] serio: i8042 AUX port at 0x60,0x64 irq 12
- [17179573.400000] serio: i8042 KBD port at 0x60,0x64 irq 1
- [17179573.400000] EISA: Probing bus 0 at eisa.0
- [17179573.400000] Cannot allocate resource for EISA slot 4
- [17179573.400000] EISA: Detected 0 cards.
- [17179573.400000] TCP bic registered
- [17179573.400000] NET: Registered protocol family 1
- [17179573.400000] NET: Registered protocol family 8
- [17179573.400000] NET: Registered protocol family 20
- [17179573.400000] Starting balanced_irq
- [17179573.400000] Using IPI No-Shortcut mode
- [17179573.400000] ACPI: (supports S0 S1 S3 S4 S5)
- [17179573.400000] Freeing unused kernel memory: 308k freed
- [17179574.480000] Capability LSM initialized
- [17179574.512000] ACPI: Fan [FAN] (on)
- [17179574.516000] ACPI: Thermal Zone [THRM] (40 C)
- [17179574.912000] SCSI subsystem initialized
- [17179574.912000] libata version 1.20 loaded.
- [17179574.916000] sata_nv 0000:00:07.0: version 0.8
- [17179574.916000] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23
- [17179574.916000] ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [APSI] -> GSI 23 (level, low) -> IRQ 217
- [17179574.916000] PCI: Setting latency timer of device 0000:00:07.0 to 64
- [17179574.916000] ata1: SATA max UDMA/133 cmd 0x9F0 ctl 0xBF2 bmdma 0xD800 irq 217
- [17179574.916000] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xB72 bmdma 0xD808 irq 217
- [17179575.120000] ata1: SATA link down (SStatus 0)
- [17179575.120000] scsi0 : sata_nv
- [17179575.324000] ata2: SATA link down (SStatus 0)
- [17179575.324000] scsi1 : sata_nv
- [17179575.324000] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22
- [17179575.324000] ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APSJ] -> GSI 22 (level, low) -> IRQ 225
- [17179575.324000] PCI: Setting latency timer of device 0000:00:08.0 to 64
- [17179575.324000] ata3: SATA max UDMA/133 cmd 0x9E0 ctl 0xBE2 bmdma 0xC400 irq 225
- [17179575.324000] ata4: SATA max UDMA/133 cmd 0x960 ctl 0xB62 bmdma 0xC408 irq 225
- [17179575.528000] ata3: SATA link up 1.5 Gbps (SStatus 113)
- [17179575.692000] ata3: dev 0 cfg 49:2f00 82:346b 83:7d01 84:4023 85:3468 86:3c01 87:4023 88:407f
- [17179575.692000] ata3: dev 0 ATA-7, max UDMA/133, 586070255 sectors: LBA48
- [17179575.692000] nv_sata: Primary device added
- [17179575.692000] nv_sata: Primary device removed
- [17179575.692000] nv_sata: Secondary device added
- [17179575.692000] nv_sata: Secondary device removed
- [17179575.700000] ata3: dev 0 configured for UDMA/133
- [17179575.700000] scsi2 : sata_nv
- [17179575.904000] ata4: SATA link down (SStatus 0)
- [17179575.904000] scsi3 : sata_nv
- [17179575.904000] Vendor: ATA Model: ST3300831AS Rev: 3.03
- [17179575.904000] Type: Direct-Access ANSI SCSI revision: 05
- [17179575.904000] NFORCE-CK804: IDE controller at PCI slot 0000:00:06.0
- [17179575.904000] NFORCE-CK804: chipset revision 242
- [17179575.904000] NFORCE-CK804: not 100% native mode: will probe irqs later
- [17179575.904000] NFORCE-CK804: BIOS didn't set cable bits correctly. Enabling workaround.
- [17179575.904000] NFORCE-CK804: 0000:00:06.0 (rev f2) UDMA133 controller
- [17179575.904000] ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
- [17179575.904000] ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
- [17179575.904000] Probing IDE interface ide0...
- [17179575.916000] SCSI device sda: 586070255 512-byte hdwr sectors (300068 MB)
- [17179575.916000] sda: Write Protect is off
- [17179575.916000] sda: Mode Sense: 00 3a 00 00
- [17179575.916000] SCSI device sda: drive cache: write back
- [17179575.916000] SCSI device sda: 586070255 512-byte hdwr sectors (300068 MB)
- [17179575.916000] sda: Write Protect is off
- [17179575.916000] sda: Mode Sense: 00 3a 00 00
- [17179575.916000] SCSI device sda: drive cache: write back
- [17179575.916000] sda: sda1 sda2 sda3 < sda5 >
- [17179575.948000] sd 2:0:0:0: Attached scsi disk sda
- [17179576.640000] hda: LITE-ON DVDRW SOHW-1673S, ATAPI CD/DVD-ROM drive
- [17179577.312000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
- [17179577.312000] Probing IDE interface ide1...
- [17179577.600000] hdc: Maxtor 6L250R0, ATA DISK drive
- [17179578.272000] ide1 at 0x170-0x177,0x376 on irq 15
- [17179578.304000] hda: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(66)
- [17179578.304000] Uniform CD-ROM driver Revision: 3.20
- [17179578.308000] hdc: max request size: 512KiB
- [17179578.308000] hdc: 490234752 sectors (251000 MB) w/16384KiB Cache, CHS=30515/255/63, UDMA(133)
- [17179578.308000] hdc: cache flushes supported
- [17179578.308000] hdc: hdc1
- [17179578.556000] usbcore: registered new driver usbfs
- [17179578.556000] usbcore: registered new driver hub
- [17179578.560000] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 21
- [17179578.560000] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCL] -> GSI 21 (level, low) -> IRQ 233
- [17179578.560000] PCI: Setting latency timer of device 0000:00:02.1 to 64
- [17179578.560000] ehci_hcd 0000:00:02.1: EHCI Host Controller
- [17179578.560000] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
- [17179578.560000] ehci_hcd 0000:00:02.1: debug port 1
- [17179578.560000] PCI: cache line size of 64 is not supported by device 0000:00:02.1
- [17179578.560000] ehci_hcd 0000:00:02.1: irq 233, io mem 0xfeb00000
- [17179578.560000] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
- [17179582.180000] usb usb1: configuration #1 chosen from 1 choice
- [17179582.180000] hub 1-0:1.0: USB hub found
- [17179582.180000] hub 1-0:1.0: 10 ports detected
- [17179582.192000] ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
- [17179582.192000] forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.54.
- [17179582.216000] ieee1394: Initialized config rom entry `ip1394'
- [17179582.284000] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 20
- [17179582.284000] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 20 (level, low) -> IRQ 50
- [17179582.284000] PCI: Setting latency timer of device 0000:00:02.0 to 64
- [17179582.284000] ohci_hcd 0000:00:02.0: OHCI Host Controller
- [17179582.284000] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
- [17179582.300000] ohci_hcd 0000:00:02.0: irq 50, io mem 0xd5004000
- [17179582.356000] usb usb2: configuration #1 chosen from 1 choice
- [17179582.356000] hub 2-0:1.0: USB hub found
- [17179582.356000] hub 2-0:1.0: 10 ports detected
- [17179582.460000] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23
- [17179582.460000] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APCH] -> GSI 23 (level, low) -> IRQ 217
- [17179582.460000] PCI: Setting latency timer of device 0000:00:0a.0 to 64
- [17179582.460000] forcedeth: using HIGHDMA
- [17179582.980000] eth0: forcedeth.c: subsystem: 01043:8141 bound to 0000:00:0a.0
- [17179582.980000] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
- [17179582.980000] ACPI: PCI Interrupt 0000:05:0b.0[A] -> Link [APC1] -> GSI 16 (level, low) -> IRQ 58
- [17179583.028000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[58] MMIO=[d4008000-d40087ff] Max Packet=[2048] IR/IT contexts=[4/8]
- [17179583.092000] kjournald starting. Commit interval 5 seconds
- [17179583.092000] EXT3-fs: mounted filesystem with ordered data mode.
- [17179583.128000] usb 2-1: new low speed USB device using ohci_hcd and address 2
- [17179583.364000] usb 2-1: configuration #1 chosen from 1 choice
- [17179583.672000] usb 2-3: new low speed USB device using ohci_hcd and address 3
- [17179583.884000] usb 2-3: configuration #1 chosen from 1 choice
- [17179584.192000] usb 2-4: new full speed USB device using ohci_hcd and address 4
- [17179584.300000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d800007aad23]
- [17179584.404000] usb 2-4: configuration #1 chosen from 1 choice
- [17179589.340000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
- [17179589.364000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
- [17179589.564000] input: PC Speaker as /class/input/input0
- [17179589.708000] eth0: no link during initialization.
- [17179589.740000] Floppy drive(s): fd0 is 1.44M
- [17179589.756000] FDC 0 is a post-1991 82077
- [17179589.836000] parport: PnPBIOS parport detected.
- [17179589.836000] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
- [17179589.936000] i2c_adapter i2c-0: nForce2 SMBus adapter at 0x4c00
- [17179589.936000] i2c_adapter i2c-1: nForce2 SMBus adapter at 0x4c40
- [17179590.176000] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
- [17179590.176000] ACPI: PCI Interrupt 0000:05:0c.0[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 66
- [17179590.176000] skge 1.5 addr 0xd4000000 irq 66 chip Yukon-Lite rev 9
- [17179590.176000] skge eth1: addr 00:15:f2:50:d1:82
- [17179590.200000] Linux agpgart interface v0.101 (c) Dave Jones
- [17179590.204000] skge eth1: enabling interface
- [17179590.272000] usbcore: registered new driver hiddev
- [17179590.288000] input: Logitech HID compliant keyboard as /class/input/input1
- [17179590.288000] input: USB HID v1.10 Keyboard [Logitech HID compliant keyboard] on usb-0000:00:02.0-1
- [17179590.304000] snd_rawmidi: Unknown symbol snd_seq_device_new
- [17179590.320000] input: Logitech HID compliant keyboard as /class/input/input2
- [17179590.320000] input: USB HID v1.10 Device [Logitech HID compliant keyboard] on usb-0000:00:02.0-1
- [17179590.332000] snd_mpu401_uart: Unknown symbol snd_rawmidi_receive
- [17179590.332000] snd_mpu401_uart: Unknown symbol snd_rawmidi_transmit_ack
- [17179590.332000] snd_mpu401_uart: Unknown symbol snd_rawmidi_transmit_peek
- [17179590.332000] snd_mpu401_uart: Unknown symbol snd_rawmidi_new
- [17179590.332000] snd_mpu401_uart: Unknown symbol snd_rawmidi_set_ops
- [17179590.332000] input: Logitech USB-PS/2 Optical Mouse as /class/input/input3
- [17179590.332000] input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:02.0-3
- [17179590.332000] usbcore: registered new driver usbhid
- [17179590.332000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
- [17179590.348000] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22
- [17179590.348000] ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [APCJ] -> GSI 22 (level, low) -> IRQ 225
- [17179590.348000] PCI: Setting latency timer of device 0000:00:04.0 to 64
- [17179590.356000] snd_mpu401: Unknown symbol snd_mpu401_uart_new
- [17179590.372000] sd 2:0:0:0: Attached scsi generic sg0 type 0
- [17179590.420000] ts: Compaq touchscreen protocol output
- [17179590.448000] usbcore: registered new driver snd-usb-audio
- [17179590.668000] intel8x0_measure_ac97_clock: measured 54691 usecs
- [17179590.668000] intel8x0: clocking to 46878
- [17179590.668000] ACPI: PCI Interrupt 0000:05:07.0[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 66
- [17179590.668000] Model 1011 Rev 00000000 Serial 10111102
- [17179590.748000] NET: Registered protocol family 17
- [17179590.776000] lp0: using parport0 (interrupt-driven).
- [17179590.796000] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
- [17179590.796000] ieee1394: sbp2: Try serialize_io=0 for better performance
- [17179590.896000] EXT3 FS on sda2, internal journal
- [17179591.084000] NTFS driver 2.1.27 [Flags: R/O MODULE].
- [17179591.096000] NTFS volume version 3.1.
- [17179591.124000] NTFS volume version 3.1.
- [17179591.152000] NTFS volume version 3.1.
- [17179591.884000] skge eth1: Link is up at 100 Mbps, full duplex, flow control tx and rx
- [17179592.352000] skge eth1: disabling interface
- [17179592.356000] skge eth1: enabling interface
- [17179594.040000] skge eth1: Link is up at 100 Mbps, full duplex, flow control tx and rx
- [17179594.104000] NET: Registered protocol family 10
- [17179594.104000] lo: Disabled Privacy Extensions
- [17179594.104000] ADDRCONF(NETDEV_UP): eth0: link is not ready
- [17179594.108000] IPv6 over IPv4 tunneling driver
- [17179595.432000] ACPI: Power Button (FF) [PWRF]
- [17179595.432000] ACPI: Power Button (CM) [PWRB]
- [17179595.544000] ibm_acpi: ec object not found
- [17179595.576000] pcc_acpi: loading...
- [17179595.832000] powernow-k8: Found 2 AMD Athlon 64 / Opteron processors (version 1.60.2)
- [17179595.832000] powernow-k8: MP systems not supported by PSB BIOS structure
- [17179595.832000] powernow-k8: MP systems not supported by PSB BIOS structure
- [17179598.288000] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
- [17179598.288000] apm: disabled - APM is not SMP safe.
- [17179602.028000] Bluetooth: Core ver 2.8
- [17179602.028000] NET: Registered protocol family 31
- [17179602.028000] Bluetooth: HCI device and connection manager initialized
- [17179602.028000] Bluetooth: HCI socket layer initialized
- [17179602.044000] Bluetooth: L2CAP ver 2.8
- [17179602.044000] Bluetooth: L2CAP socket layer initialized
- [17179602.064000] Bluetooth: RFCOMM socket layer initialized
- [17179602.064000] Bluetooth: RFCOMM TTY layer initialized
- [17179602.064000] Bluetooth: RFCOMM ver 1.7
- [17179604.168000] eth1: no IPv6 routers present
advertising
Update the Post
Either update this post and resubmit it with changes, or make a new post.
You may also comment on this post.
Please note that information posted here will not expire by default. If you do not want it to expire, please set the expiry time above. If it is set to expire, web search engines will not be allowed to index it prior to it expiring. Items that are not marked to expire will be indexable by search engines. Be careful with your passwords. All illegal activities will be reported and any information will be handed over to the authorities, so be good.