dmesg output: [ 24.833867] TCP: Hash tables configured (established 131072 bind 65536) [ 24.833871] TCP reno registered [ 24.844432] checking if image is initramfs... it is [ 25.291345] Switched to high resolution mode on CPU 0 [ 25.426591] Freeing initrd memory: 7124k freed [ 25.427217] audit: initializing netlink socket (disabled) [ 25.427239] audit(1201306783.004:1): initialized [ 25.427335] highmem bounce pool size: 64 pages [ 25.429332] VFS: Disk quotas dquot_6.5.1 [ 25.429396] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 25.429530] io scheduler noop registered [ 25.429533] io scheduler anticipatory registered [ 25.429535] io scheduler deadline registered [ 25.429549] io scheduler cfq registered (default) [ 25.429611] Boot video device is 0000:01:00.0 [ 25.429827] isapnp: Scanning for PnP cards... [ 25.782662] isapnp: No Plug & Play device found [ 25.809571] Real Time Clock Driver v1.12ac [ 25.809699] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 25.809810] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 25.809973] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 25.810636] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 25.811509] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 25.811795] input: Macintosh mouse button emulation as /class/input/input0 [ 25.811877] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 25.811880] PNP: PS/2 controller doesn't have AUX irq; using default 12 [ 25.812201] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 25.812208] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 25.812383] mice: PS/2 mouse device common for all mice [ 25.812514] EISA: Probing bus 0 at eisa.0 [ 25.812552] EISA: Detected 0 cards. [ 25.812811] TCP cubic registered [ 25.812822] NET: Registered protocol family 1 [ 25.812845] Using IPI No-Shortcut mode [ 25.813093] Magic number: 8:190:305 [ 25.813351] hash matches device tty34 [ 25.814096] Freeing unused kernel memory: 364k freed [ 25.854248] input: AT Translated Set 2 keyboard as /class/input/input1 [ 27.027222] AppArmor: AppArmor initialized<5>audit(1201306784.504:2): type=1505 info="AppArmor initialized" pid=1183 [ 27.035030] fuse init (API version 7.8) [ 27.040982] Failure registering capabilities with primary security module. [ 27.062525] ACPI: Processor [CPU1] (supports 8 throttling states) [ 27.695536] SCSI subsystem initialized [ 27.700557] libata version 2.21 loaded. [ 27.703192] pata_sis 0000:00:02.5: version 0.5.1 [ 27.703502] scsi0 : pata_sis [ 27.703568] scsi1 : pata_sis [ 27.703702] ata1: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001ffa0 irq 14 [ 27.703706] ata2: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001ffa8 irq 15 [ 27.724273] usbcore: registered new interface driver usbfs [ 27.724322] usbcore: registered new interface driver hub [ 27.724352] usbcore: registered new device driver usb [ 27.738279] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 27.791102] sis900.c: v1.08.10 Apr. 2 2006 [ 27.866414] ata1.00: ATA-6: WDC WD800BB-00JHC0, 05.01C05, max UDMA/100 [ 27.866421] ata1.00: 156301488 sectors, multi 16: LBA [ 27.874360] ata1.00: configured for UDMA/100 [ 27.940134] Floppy drive(s): fd0 is 1.44M [ 27.974221] FDC 0 is a post-1991 82077 [ 28.377176] ata2.01: ATAPI: LITE-ON DVDRW SHW-160P6S, PS01, max UDMA/66 [ 28.377191] ata2.01: limited to UDMA/33 due to 40-wire cable [ 28.564770] ata2.01: configured for UDMA/33 [ 28.564964] scsi 0:0:0:0: Direct-Access ATA WDC WD800BB-00JH 05.0 PQ: 0 ANSI: 5 [ 28.566268] scsi 1:0:1:0: CD-ROM LITE-ON DVDRW SHW-160P6S PS01 PQ: 0 ANSI: 5 [ 28.566721] ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 16 [ 28.566744] ohci_hcd 0000:00:03.0: OHCI Host Controller [ 28.567142] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 1 [ 28.567170] ohci_hcd 0000:00:03.0: irq 16, io mem 0xcffec000 [ 28.585678] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) [ 28.585706] sd 0:0:0:0: [sda] Write Protect is off [ 28.585710] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 28.585731] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 28.585837] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) [ 28.585848] sd 0:0:0:0: [sda] Write Protect is off [ 28.585851] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 28.585867] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 28.585874] sda: sda1 sda2 < sda5 > [ 28.617717] sd 0:0:0:0: [sda] Attached SCSI disk [ 28.622520] usb usb1: configuration #1 chosen from 1 choice [ 28.622561] hub 1-0:1.0: USB hub found [ 28.622581] hub 1-0:1.0: 3 ports detected [ 28.626076] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 28.626228] scsi 1:0:1:0: Attached scsi generic sg1 type 5 [ 28.648382] sr0: scsi3-mmc drive: 62x/62x writer cd/rw xa/form2 cdda tray [ 28.648393] Uniform CD-ROM driver Revision: 3.20 [ 28.648807] sr 1:0:1:0: Attached scsi CD-ROM sr0 [ 28.724320] ACPI: PCI Interrupt 0000:00:03.1[B] -> GSI 21 (level, low) -> IRQ 17 [ 28.724352] ohci_hcd 0000:00:03.1: OHCI Host Controller [ 28.724393] ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 2 [ 28.724418] ohci_hcd 0000:00:03.1: irq 17, io mem 0xcffed000 [ 28.782183] usb usb2: configuration #1 chosen from 1 choice [ 28.782229] hub 2-0:1.0: USB hub found [ 28.782249] hub 2-0:1.0: 3 ports detected [ 28.883978] ACPI: PCI Interrupt 0000:00:03.2[C] -> GSI 22 (level, low) -> IRQ 18 [ 28.884010] ohci_hcd 0000:00:03.2: OHCI Host Controller [ 28.884046] ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 3 [ 28.884074] ohci_hcd 0000:00:03.2: irq 18, io mem 0xcffee000 [ 28.890777] Attempting manual resume [ 28.890784] swsusp: Resume From Partition 8:5 [ 28.890785] PM: Checking swsusp image. [ 28.891084] PM: Resume from disk failed. [ 28.909149] EXT3-fs: INFO: recovery required on readonly filesystem. [ 28.909157] EXT3-fs: write access will be enabled during recovery. [ 28.941798] usb usb3: configuration #1 chosen from 1 choice [ 28.941841] hub 3-0:1.0: USB hub found [ 28.941860] hub 3-0:1.0: 2 ports detected [ 29.027459] usb 1-1: new low speed USB device using ohci_hcd and address 2 [ 29.043743] ACPI: PCI Interrupt 0000:00:03.3[D] -> GSI 23 (level, low) -> IRQ 19 [ 29.043765] ehci_hcd 0000:00:03.3: EHCI Host Controller [ 29.043816] ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 4 [ 29.043878] PCI: cache line size of 64 is not supported by device 0000:00:03.3 [ 29.043893] ehci_hcd 0000:00:03.3: irq 19, io mem 0xcffef000 [ 29.207106] ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 29.207284] usb usb4: configuration #1 chosen from 1 choice [ 29.207333] hub 4-0:1.0: USB hub found [ 29.207350] hub 4-0:1.0: 8 ports detected [ 29.311223] ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 19 (level, low) -> IRQ 20 [ 29.312474] 0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 1. [ 29.322229] 0000:00:04.0: Using transceiver found at address 1 as default [ 29.323216] eth0: SiS 900 PCI Fast Ethernet at 0xe400, IRQ 20, 00:11:5b:fc:36:8d. [ 29.614232] usb 1-1: device not accepting address 2, error -62 [ 30.284859] usb 1-1: new low speed USB device using ohci_hcd and address 4 [ 30.494444] usb 1-1: configuration #1 chosen from 1 choice [ 30.518501] usbcore: registered new interface driver hiddev [ 30.529706] input: HID 1241:1166 as /class/input/input2 [ 30.529855] input: USB HID v1.00 Mouse [HID 1241:1166] on usb-0000:00:03.0-1 [ 30.529880] usbcore: registered new interface driver usbhid [ 30.529885] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 31.857188] kjournald starting. Commit interval 5 seconds [ 31.857220] EXT3-fs: sda1: orphan cleanup on readonly fs [ 31.896139] ext3_orphan_cleanup: deleting unreferenced inode 131626 [ 31.896983] ext3_orphan_cleanup: deleting unreferenced inode 131510 [ 31.897000] ext3_orphan_cleanup: deleting unreferenced inode 131171 [ 31.897014] ext3_orphan_cleanup: deleting unreferenced inode 8405028 [ 31.897025] ext3_orphan_cleanup: deleting unreferenced inode 8405005 [ 31.897033] ext3_orphan_cleanup: deleting unreferenced inode 8405004 [ 31.897042] ext3_orphan_cleanup: deleting unreferenced inode 8405001 [ 31.897049] ext3_orphan_cleanup: deleting unreferenced inode 8404996 [ 31.897055] EXT3-fs: sda1: 8 orphan inodes deleted [ 31.897057] EXT3-fs: recovery complete. [ 31.911498] EXT3-fs: mounted filesystem with ordered data mode. [ 40.460271] NET: Registered protocol family 10 [ 40.460415] lo: Disabled Privacy Extensions [ 41.135068] eth0: Media Link On 100mbps full-duplex [ 41.268306] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 41.352797] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 41.380973] Linux agpgart interface v0.102 (c) Dave Jones [ 41.399507] agpgart: Detected SiS chipset - id:1857 [ 41.405535] agpgart: AGP aperture is 64M @ 0xd0000000 [ 42.445125] Linux video capture interface: v2.00 [ 42.780172] cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.6 loaded [ 42.780317] cx88[0]: subsystem: 11bd:0051, board: Pinnacle PCTV HD 800i [card=58,autodetected] [ 42.780320] cx88[0]: TV tuner type 76, Radio tuner type -1 [ 42.803823] input: PC Speaker as /class/input/input3 [ 42.840727] cx88/0: cx2388x v4l2 driver version 0.0.6 loaded [ 42.929483] input: cx88 IR (Pinnacle PCTV HD 800i) as /class/input/input4 [ 42.929528] cx88[0]/2: cx2388x 8802 Driver Manager [ 42.929566] ACPI: PCI Interrupt 0000:00:09.2[A] -> GSI 17 (level, low) -> IRQ 21 [ 42.929578] cx88[0]/2: found at 0000:00:09.2, rev: 5, irq: 21, latency: 64, mmio: 0xce000000 [ 42.929726] ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 17 (level, low) -> IRQ 21 [ 42.929738] cx88[0]/0: found at 0000:00:09.0, rev: 5, irq: 21, latency: 64, mmio: 0xcc000000 [ 43.016285] irda_init() [ 43.016341] NET: Registered protocol family 23 [ 43.101920] cx2388x alsa driver version 0.0.6 loaded [ 43.263363] cx88/2: cx2388x dvb driver version 0.0.6 loaded [ 43.263371] cx88/2: registering cx8802 driver, type: dvb access: shared [ 43.263376] cx88[0]/2: subsystem: 11bd:0051, board: Pinnacle PCTV HD 800i [card=58] [ 43.263380] cx88[0]/2: cx2388x based DVB/ATSC card [ 43.351736] ivtv: Start initialization, version 1.2.0 [ 43.450174] xc5000: Successfully identified at address 0x64 [ 43.450180] xc5000: Firmware has not been loaded previously [ 43.451089] DVB: registering new adapter (cx88[0]) [ 43.451094] DVB: registering frontend 0 (Samsung S5H1409 QAM/8VSB Frontend)... [ 43.574181] tuner' 0-0064: chip found @ 0xc8 (cx88[0]) [ 43.574956] xc5000: Successfully identified at address 0x64 [ 43.574959] xc5000: Firmware has not been loaded previously [ 43.574964] xc5000: waiting for firmware upload (dvb-fe-xc5000-1.1.fw)... [ 43.807348] xc5000: firmware read 12332 bytes. [ 43.807354] xc5000: firmware upload [ 48.492583] cx88[0]/0: registered device video0 [v4l2] [ 48.492720] cx88[0]/0: registered device vbi0 [ 50.575684] ACPI: PCI Interrupt 0000:00:09.1[A] -> GSI 17 (level, low) -> IRQ 21 [ 50.575727] cx88[0]/1: CX88x/0: ALSA support for cx2388x boards [ 50.577038] ivtv0: Initializing card #0 [ 50.577045] ivtv0: Autodetected Hauppauge card (cx23416 based) [ 50.577106] ACPI: PCI Interrupt 0000:02:08.0[A] -> GSI 18 (level, low) -> IRQ 22 [ 50.626182] tveeprom 1-0050: Hauppauge model 23552, rev D592, serial# 2995164 [ 50.626185] tveeprom 1-0050: tuner model is Philips FQ1236A MK4 (idx 92, type 57) [ 50.626189] tveeprom 1-0050: TV standards NTSC(M) (eeprom 0x08) [ 50.626192] tveeprom 1-0050: second tuner model is Philips TEA5768HL FM Radio (idx 101, type 62) [ 50.626195] tveeprom 1-0050: audio processor is CX25843 (idx 37) [ 50.626198] tveeprom 1-0050: decoder processor is CX25843 (idx 30) [ 50.626200] tveeprom 1-0050: has radio, has no IR receiver, has no IR transmitter [ 50.626204] ivtv0: Autodetected WinTV PVR 500 (unit #1) [ 50.626357] ACPI: PCI Interrupt 0000:00:02.7[C] -> GSI 18 (level, low) -> IRQ 22 [ 50.748573] cx25840 1-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0) [ 50.750410] tuner 1-0060: chip found @ 0xc0 (ivtv i2c driver #0) [ 50.750416] tea5767 1-0060: type set to Philips TEA5767HN FM Radio [ 50.758516] tuner 1-0043: chip found @ 0x86 (ivtv i2c driver #0) [ 50.758520] tda9887 1-0043: tda988[5/6/7] found [ 50.759749] tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0) [ 50.759780] wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #0) [ 50.767362] tuner-simple 1-0061: type set to 57 (Philips FQ1236A MK4) [ 50.768830] ivtv0: Registered device video1 for encoder MPG (4096 kB) [ 50.768866] ivtv0: Registered device video32 for encoder YUV (2048 kB) [ 50.768934] ivtv0: Registered device vbi1 for encoder VBI (1024 kB) [ 50.768963] ivtv0: Registered device video24 for encoder PCM (320 kB) [ 50.768998] ivtv0: Registered device radio0 for encoder radio [ 50.769001] ivtv0: Initialized card #0: WinTV PVR 500 (unit #1) [ 50.769233] ivtv1: Initializing card #1 [ 50.769238] ivtv1: Autodetected Hauppauge card (cx23416 based) [ 50.769320] ACPI: PCI Interrupt 0000:02:09.0[A] -> GSI 19 (level, low) -> IRQ 20 [ 50.818235] tveeprom 2-0050: Hauppauge model 23552, rev D592, serial# 2995164 [ 50.818239] tveeprom 2-0050: tuner model is Philips FQ1236A MK4 (idx 92, type 57) [ 50.818242] tveeprom 2-0050: TV standards NTSC(M) (eeprom 0x08) [ 50.818245] tveeprom 2-0050: second tuner model is Philips TEA5768HL FM Radio (idx 101, type 62) [ 50.818249] tveeprom 2-0050: audio processor is CX25843 (idx 37) [ 50.818251] tveeprom 2-0050: decoder processor is CX25843 (idx 30) [ 50.818253] tveeprom 2-0050: has radio, has no IR receiver, has no IR transmitter [ 50.818257] ivtv1: Correcting tveeprom data: no radio present on second unit [ 50.818259] ivtv1: Autodetected WinTV PVR 500 (unit #2) [ 50.847444] cx25840 2-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #1) [ 50.855579] tuner 2-0043: chip found @ 0x86 (ivtv i2c driver #1) [ 50.855584] tda9887 2-0043: tda988[5/6/7] found [ 50.856798] tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #1) [ 50.856833] wm8775 2-001b: chip found @ 0x36 (ivtv i2c driver #1) [ 50.864411] tuner-simple 2-0061: type set to 57 (Philips FQ1236A MK4) [ 50.865875] ivtv1: Registered device video2 for encoder MPG (4096 kB) [ 50.865907] ivtv1: Registered device video33 for encoder YUV (2048 kB) [ 50.865935] ivtv1: Registered device vbi2 for encoder VBI (1024 kB) [ 50.865966] ivtv1: Registered device video25 for encoder PCM (320 kB) [ 50.865969] ivtv1: Initialized card #1: WinTV PVR 500 (unit #2) [ 50.865993] ivtv: End initialization [ 50.949594] intel8x0_measure_ac97_clock: measured 55723 usecs [ 50.949601] intel8x0: clocking to 48000 [ 51.029436] eth0: no IPv6 routers present [ 51.733528] lp: driver loaded but no devices found [ 51.788559] Zapata Telephony Interface Registered on major 196 [ 51.788567] Zaptel Version: 1.4.7.1 [ 51.788568] Zaptel Echo Canceller: MG2 [ 51.911095] Adding 3028212k swap on /dev/sda5. Priority:-1 extents:1 across:3028212k [ 52.115955] EXT3 FS on sda1, internal journal [ 53.498634] No dock devices found. [ 53.597119] input: Power Button (FF) as /class/input/input5 [ 53.603125] ACPI: Power Button (FF) [PWRF] [ 53.642835] input: Power Button (CM) as /class/input/input6 [ 53.648783] ACPI: Power Button (CM) [PWRB] [ 53.975978] powernow: PowerNOW! Technology present. Can scale: frequency and voltage. [ 53.979721] powernow: Trying ACPI perflib [ 53.979739] powernow: ACPI perflib can not be used in this platform [ 53.979742] powernow: ACPI and legacy methods failed [ 53.979744] powernow: See http://www.codemonkey.org.uk/projects/cpufreq/powernow-k7.html [ 57.307669] nvidia: module license 'NVIDIA' taints kernel. [ 57.572525] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 23 [ 57.573383] NVRM: loading NVIDIA UNIX x86 Kernel Module 169.07 Thu Dec 13 18:42:56 PST 2007 [ 57.707574] agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0. [ 57.707602] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode [ 57.708592] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode [ 58.111570] Registered Tormenta2 PCI [ 58.760438] usbcore: registered new interface driver wcusb [ 58.760831] Wildcard USB FXS Interface driver registered [ 58.839393] ztdummy: Trying to load High Resolution Timer [ 58.839402] ztdummy: Initialized High Resolution Timer [ 58.839404] ztdummy: Starting High Resolution Timer [ 58.839412] ztdummy: High Resolution Timer started, good to go [ 63.140420] ppdev: user-space parallel port driver [ 63.757161] audit(1201306822.141:3): type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=5539 profile="/usr/sbin/cupsd" [ 68.325677] UDF-fs: Partition marked readonly; forcing readonly mount [ 68.352802] UDF-fs INFO UDF 0.9.8.1 (2004/29/09) Mounting volume 'DVD_VIDEO', timestamp 2001/11/08 21:02 (1e98) [ 83.380887] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) [ 83.380897] apm: overridden by ACPI. [ 102.285621] ivtv0: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes) [ 102.481925] ivtv0: Encoder revision: 0x02060039 [ 105.847899] cx25840 1-0044: loaded v4l-cx25840.fw firmware (16382 bytes) [ 107.126598] ivtv1: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes) [ 107.323769] ivtv1: Encoder revision: 0x02060039 [ 110.558826] cx25840 2-0044: loaded v4l-cx25840.fw firmware (16382 bytes) [ 111.432202] Failure registering capabilities with primary security module. [ 113.705850] Bluetooth: Core ver 2.11 [ 113.706142] NET: Registered protocol family 31 [ 113.706145] Bluetooth: HCI device and connection manager initialized [ 113.706151] Bluetooth: HCI socket layer initialized [ 114.037064] Bluetooth: L2CAP ver 2.8 [ 114.037072] Bluetooth: L2CAP socket layer initialized [ 114.370566] Bluetooth: RFCOMM socket layer initialized [ 114.370685] Bluetooth: RFCOMM TTY layer initialized [ 114.370688] Bluetooth: RFCOMM ver 1.8 [ 136.333347] Zaptel Transcoder support loaded [ 190.408603] xc5000: waiting for firmware upload (dvb-fe-xc5000-1.1.fw)... [ 190.413004] xc5000: firmware read 12332 bytes. [ 190.413010] xc5000: firmware upload [ 432.928563] cx88[0]: video y / packed - dma channel status dump [ 432.928577] cx88[0]: cmds: initial risc: 0x12442000 [ 432.928580] cx88[0]: cmds: cdt base : 0x00180440 [ 432.928583] cx88[0]: cmds: cdt size : 0x0000000c [ 432.928586] cx88[0]: cmds: iq base : 0x00180400 [ 432.928589] cx88[0]: cmds: iq size : 0x00000010 [ 432.928592] cx88[0]: cmds: risc pc : 0x124a2958 [ 432.928594] cx88[0]: cmds: iq wr ptr : 0x00000104 [ 432.928597] cx88[0]: cmds: iq rd ptr : 0x00000108 [ 432.928600] cx88[0]: cmds: cdt current : 0x00000458 [ 432.928602] cx88[0]: cmds: pci target : 0x12497440 [ 432.928605] cx88[0]: cmds: line / byte : 0x00f00000 [ 432.928608] cx88[0]: risc0: 0x80008200 [ sync resync count=512 ] [ 432.928613] cx88[0]: risc1: 0x1c0003c0 [ write sol eol count=960 ] [ 432.928617] cx88[0]: risc2: 0x124253c0 [ arg #1 ] [ 432.928621] cx88[0]: risc3: 0x1c0003c0 [ write sol eol count=960 ] [ 432.928625] cx88[0]: iq 0: 0x1c0003c0 [ write sol eol count=960 ] [ 432.928630] cx88[0]: iq 1: 0x124271c0 [ arg #1 ] [ 432.928632] cx88[0]: iq 2: 0x1c0003c0 [ write sol eol count=960 ] [ 432.928636] cx88[0]: iq 3: 0x12427940 [ arg #1 ] [ 432.928639] cx88[0]: iq 4: 0x12496900 [ write irq2 22 19 cnt0 14 13 count=2304 ] [ 432.928644] cx88[0]: iq 5: 0x1c0003c0 [ arg #1 ] [ 432.928647] cx88[0]: iq 6: 0x12497080 [ write irq2 22 19 cnt0 14 13 12 count=128 ] [ 432.928652] cx88[0]: iq 7: 0x80008200 [ arg #1 ] [ 432.928655] cx88[0]: iq 8: 0x1c0003c0 [ write sol eol count=960 ] [ 432.928661] cx88[0]: iq 9: 0x124253c0 [ arg #1 ] [ 432.928663] cx88[0]: iq a: 0x1c0003c0 [ write sol eol count=960 ] [ 432.928667] cx88[0]: iq b: 0x12425b40 [ arg #1 ] [ 432.928670] cx88[0]: iq c: 0x1c0003c0 [ write sol eol count=960 ] [ 432.928674] cx88[0]: iq d: 0x124262c0 [ arg #1 ] [ 432.928677] cx88[0]: iq e: 0x1c0003c0 [ write sol eol count=960 ] [ 432.928681] cx88[0]: iq f: 0x12426a40 [ arg #1 ] [ 432.928683] cx88[0]: fifo: 0x00180c00 -> 0x183400 [ 432.928685] cx88[0]: ctrl: 0x00180400 -> 0x180460 [ 432.928688] cx88[0]: ptr1_reg: 0x00181380 [ 432.928690] cx88[0]: ptr2_reg: 0x00180468 [ 432.928693] cx88[0]: cnt1_reg: 0x00000000 [ 432.928695] cx88[0]: cnt2_reg: 0x00000000 [ 432.928702] cx88[0]/0: [ecfcb840/1] timeout - dma=0x124a2000 [ 432.928705] cx88[0]/0: [ecfcb240/2] timeout - dma=0x12820000 [ 432.928707] cx88[0]/0: [ecfcb600/3] timeout - dma=0x1289e000 [ 432.928710] cx88[0]/0: [ecfcb480/4] timeout - dma=0x128fc000 [ 432.928712] cx88[0]/0: [ecfcbe40/0] timeout - dma=0x12442000