[17179569.184000] Linux version 2.6.15-27-386 (buildd@terranova) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 PREEMPT Sat Sep 16 01:51:59 UTC 2006 [17179569.184000] BIOS-provided physical RAM map: [17179569.184000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [17179569.184000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [17179569.184000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) [17179569.184000] BIOS-e820: 0000000000100000 - 000000001fee0000 (usable) [17179569.184000] BIOS-e820: 000000001fee0000 - 000000001feec000 (ACPI data) [17179569.184000] BIOS-e820: 000000001feec000 - 000000001ff00000 (ACPI NVS) [17179569.184000] BIOS-e820: 000000001ff00000 - 0000000020000000 (reserved) [17179569.184000] BIOS-e820: 00000000fec10000 - 00000000fec20000 (reserved) [17179569.184000] BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved) [17179569.184000] BIOS-e820: 00000000fffffc00 - 0000000100000000 (reserved) [17179569.184000] 0MB HIGHMEM available. [17179569.184000] 510MB LOWMEM available. [17179569.184000] On node 0 totalpages: 130784 [17179569.184000] DMA zone: 4096 pages, LIFO batch:0 [17179569.184000] DMA32 zone: 0 pages, LIFO batch:0 [17179569.184000] Normal zone: 126688 pages, LIFO batch:31 [17179569.184000] HighMem zone: 0 pages, LIFO batch:0 [17179569.184000] DMI present. [17179569.184000] ACPI: RSDP (v000 ACER ) @ 0x000f62c0 [17179569.184000] ACPI: RSDT (v001 ACER Kestrel 0x20020909 LTP 0x00000000) @ 0x1fee6205 [17179569.184000] ACPI: FADT (v001 ACER Kestrel 0x20020909 PTL 0x00000050) @ 0x1feebf2c [17179569.184000] ACPI: HPET (v001 ACER Kestrel 0x20020909 PTL 0x00000000) @ 0x1feebfa0 [17179569.184000] ACPI: BOOT (v001 ACER Kestrel 0x20020909 LTP 0x00000001) @ 0x1feebfd8 [17179569.184000] ACPI: DSDT (v001 ACER Kestrel 0x20020909 MSFT 0x0100000e) @ 0x00000000 [17179569.184000] ACPI: PM-Timer IO Port: 0x1008 [17179569.184000] ACPI: HPET id: 0x8086a201 base: 0x0 [17179569.184000] Allocating PCI resources starting at 30000000 (gap: 20000000:dec10000) [17179569.184000] Built 1 zonelists [17179569.184000] Kernel command line: root=/dev/hda4 ro quiet splash [17179569.184000] Local APIC disabled by BIOS (or by default) -- you can enable it with "lapic" [17179569.184000] mapped APIC to ffffd000 (01400000) [17179569.184000] Initializing CPU#0 [17179569.184000] PID hash table entries: 2048 (order: 11, 32768 bytes) [17179569.184000] Detected 1499.013 MHz processor. [17179569.184000] Using pmtmr for high-res timesource [17179569.184000] Console: colour VGA+ 80x25 [17179572.736000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [17179572.736000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [17179572.748000] Memory: 508084k/523136k available (1976k kernel code, 14416k reserved, 606k data, 288k init, 0k highmem) [17179572.748000] Checking if this processor honours the WP bit even in supervisor mode... Ok. [17179572.828000] Calibrating delay using timer specific routine.. 3000.11 BogoMIPS (lpj=6000231) [17179572.828000] Security Framework v1.0.0 initialized [17179572.828000] SELinux: Disabled at boot. [17179572.828000] Mount-cache hash table entries: 512 [17179572.828000] CPU: After generic identify, caps: afe9f9bf 00000000 00000000 00000000 00000180 00000000 00000000 [17179572.828000] CPU: After vendor identify, caps: afe9f9bf 00000000 00000000 00000000 00000180 00000000 00000000 [17179572.828000] CPU: L1 I cache: 32K, L1 D cache: 32K [17179572.828000] CPU: L2 cache: 2048K [17179572.828000] CPU: After all inits, caps: afe9f9bf 00000000 00000000 00000040 00000180 00000000 00000000 [17179572.828000] mtrr: v2.0 (20020519) [17179572.828000] CPU: Intel(R) Pentium(R) M processor 1.50GHz stepping 06 [17179572.828000] Enabling fast FPU save and restore... done. [17179572.828000] Enabling unmasked SIMD FPU exception support... done. [17179572.828000] Checking 'hlt' instruction... OK. [17179572.844000] checking if image is initramfs... it is [17179573.532000] Freeing initrd memory: 6616k freed [17179573.540000] ACPI: Looking for DSDT ... not found! [17179573.544000] ACPI: setting ELCR to 0200 (from 0440) [17179573.556000] NET: Registered protocol family 16 [17179573.556000] EISA bus registered [17179573.556000] ACPI: bus type pci registered [17179573.556000] PCI: PCI BIOS revision 2.10 entry at 0xfd782, last bus=2 [17179573.556000] PCI: Using configuration type 1 [17179573.556000] ACPI: Subsystem revision 20051216 [17179573.560000] ACPI: Interpreter enabled [17179573.560000] ACPI: Using PIC for interrupt routing [17179573.560000] ACPI: PCI Root Bridge [PCI0] (0000:00) [17179573.560000] PCI: Probing PCI hardware (bus 00) [17179573.564000] PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO [17179573.564000] PCI quirk: region 1180-11bf claimed by ICH4 GPIO [17179573.564000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 [17179573.564000] Boot video device is 0000:01:00.0 [17179573.564000] PCI: Transparent bridge - 0000:00:1e.0 [17179573.564000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [17179573.568000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [17179573.568000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] [17179573.568000] ACPI: PCI Interrupt Link [LNKA] (IRQs *6) [17179573.568000] ACPI: PCI Interrupt Link [LNKB] (IRQs *10) [17179573.568000] ACPI: PCI Interrupt Link [LNKC] (IRQs *6) [17179573.568000] ACPI: PCI Interrupt Link [LNKD] (IRQs *6) [17179573.568000] ACPI: PCI Interrupt Link [LNKE] (IRQs *10) [17179573.568000] ACPI: PCI Interrupt Link [LNKF] (IRQs 10) *0, disabled. [17179573.568000] ACPI: PCI Interrupt Link [LNKG] (IRQs 6) *0, disabled. [17179573.568000] ACPI: PCI Interrupt Link [LNKH] (IRQs *10) [17179573.572000] ACPI: Embedded Controller [EC0] (gpe 29) interrupt mode. [17179573.588000] ACPI: Power Resource [PFN0] (off) [17179573.588000] ACPI: Power Resource [PFN1] (off) [17179573.588000] Linux Plug and Play Support v0.97 (c) Adam Belay [17179573.588000] pnp: PnP ACPI init [17179573.592000] pnp: PnP ACPI: found 8 devices [17179573.592000] PnPBIOS: Disabled by ACPI PNP [17179573.592000] PCI: Using ACPI for IRQ routing [17179573.592000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [17179573.596000] pnp: 00:03: ioport range 0x164e-0x164f has been reserved [17179573.596000] PCI: Bridge: 0000:00:01.0 [17179573.596000] IO window: 3000-3fff [17179573.596000] MEM window: d0100000-d01fffff [17179573.596000] PREFETCH window: d8000000-dfffffff [17179573.596000] PCI: Bus 3, cardbus bridge: 0000:02:06.0 [17179573.596000] IO window: 00004000-000040ff [17179573.596000] IO window: 00004400-000044ff [17179573.596000] PREFETCH window: 30000000-31ffffff [17179573.596000] MEM window: 34000000-35ffffff [17179573.596000] PCI: Bridge: 0000:00:1e.0 [17179573.596000] IO window: 4000-4fff [17179573.596000] MEM window: d0200000-d05fffff [17179573.596000] PREFETCH window: 30000000-32ffffff [17179573.596000] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [17179573.596000] PCI: Enabling device 0000:02:06.0 (0104 -> 0107) [17179573.596000] **** SET: Misaligned resource pointer: df9216c2 Type 07 Len 0 [17179573.596000] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 10 [17179573.596000] PCI: setting IRQ 10 as level-triggered [17179573.596000] ACPI: PCI Interrupt 0000:02:06.0[A] -> Link [LNKE] -> GSI 10 (level, low) -> IRQ 10 [17179573.596000] Simple Boot Flag at 0x37 set to 0x1 [17179573.596000] audit: initializing netlink socket (disabled) [17179573.596000] audit(1161789556.596:1): initialized [17179573.596000] VFS: Disk quotas dquot_6.5.1 [17179573.596000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [17179573.596000] Initializing Cryptographic API [17179573.596000] io scheduler noop registered [17179573.596000] io scheduler anticipatory registered [17179573.596000] io scheduler deadline registered [17179573.596000] io scheduler cfq registered [17179573.596000] isapnp: Scanning for PnP cards... [17179573.952000] isapnp: No Plug & Play device found [17179573.964000] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOU2] at 0x60,0x64 irq 1,12 [17179573.968000] i8042.c: Detected active multiplexing controller, rev 1.1. [17179573.968000] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [17179573.968000] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [17179573.968000] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [17179573.968000] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [17179573.968000] serio: i8042 KBD port at 0x60,0x64 irq 1 [17179573.968000] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled [17179573.968000] **** SET: Misaligned resource pointer: de9322c2 Type 07 Len 0 [17179573.968000] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10 [17179573.968000] ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10 [17179573.968000] ACPI: PCI interrupt for device 0000:00:1f.6 disabled [17179573.968000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [17179573.968000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [17179573.968000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [17179573.972000] mice: PS/2 mouse device common for all mice [17179573.972000] EISA: Probing bus 0 at eisa.0 [17179573.972000] Cannot allocate resource for EISA slot 1 [17179573.972000] Cannot allocate resource for EISA slot 2 [17179573.972000] Cannot allocate resource for EISA slot 3 [17179573.972000] Cannot allocate resource for EISA slot 4 [17179573.972000] EISA: Detected 0 cards. [17179573.972000] NET: Registered protocol family 2 [17179574.012000] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) [17179574.012000] TCP established hash table entries: 16384 (order: 4, 65536 bytes) [17179574.012000] TCP bind hash table entries: 16384 (order: 4, 65536 bytes) [17179574.012000] TCP: Hash tables configured (established 16384 bind 16384) [17179574.012000] TCP reno registered [17179574.012000] TCP bic registered [17179574.012000] NET: Registered protocol family 1 [17179574.012000] NET: Registered protocol family 8 [17179574.012000] NET: Registered protocol family 20 [17179574.012000] Using IPI Shortcut mode [17179574.012000] ACPI wakeup devices: [17179574.012000] GLAN MPCI T394 MDM0 USB1 USB2 USB3 [17179574.012000] ACPI: (supports S0 S3 S4 S5) [17179574.012000] Freeing unused kernel memory: 288k freed [17179574.060000] vga16fb: initializing [17179574.060000] vga16fb: mapped to 0xc00a0000 [17179574.140000] input: AT Translated Set 2 keyboard as /class/input/input0 [17179574.160000] Console: switching to colour frame buffer device 80x25 [17179574.160000] fb0: VGA16 VGA frame buffer device [17179575.276000] Capability LSM initialized [17179575.304000] ACPI: Fan [FAN0] (off) [17179575.304000] ACPI: Fan [FAN1] (off) [17179575.304000] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [17179575.304000] ACPI: Processor [CPU0] (supports 8 throttling states) [17179575.320000] ACPI: Thermal Zone [THRM] (67 C) [17179575.740000] ICH4: IDE controller at PCI slot 0000:00:1f.1 [17179575.740000] PCI: Enabling device 0000:00:1f.1 (0005 -> 0007) [17179575.740000] **** SET: Misaligned resource pointer: df9f22c2 Type 07 Len 0 [17179575.740000] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 6 [17179575.740000] PCI: setting IRQ 6 as level-triggered [17179575.740000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 6 (level, low) -> IRQ 6 [17179575.740000] ICH4: chipset revision 3 [17179575.740000] ICH4: not 100% native mode: will probe irqs later [17179575.740000] ide0: BM-DMA at 0x1860-0x1867, BIOS settings: hda:DMA, hdb:pio [17179575.740000] ide1: BM-DMA at 0x1868-0x186f, BIOS settings: hdc:DMA, hdd:pio [17179575.740000] Probing IDE interface ide0... [17179576.032000] hda: TOSHIBA MK6025GAS, ATA DISK drive [17179576.704000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [17179576.752000] Probing IDE interface ide1... [17179577.488000] hdc: Slimtype DVDRW SOSW-852S, ATAPI CD/DVD-ROM drive [17179578.160000] ide1 at 0x170-0x177,0x376 on irq 15 [17179578.164000] hda: max request size: 128KiB [17179578.168000] hda: 117210240 sectors (60011 MB), CHS=65535/16/63, UDMA(100) [17179578.168000] hda: cache flushes supported [17179578.168000] hda: hda1 hda2 hda3 < hda5 hda6 hda7 > hda4 [17179578.272000] hdc: ATAPI 15X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33) [17179578.272000] Uniform CD-ROM driver Revision: 3.20 [17179578.736000] usbcore: registered new driver usbfs [17179578.736000] usbcore: registered new driver hub [17179578.736000] USB Universal Host Controller Interface driver v2.3 [17179578.736000] **** SET: Misaligned resource pointer: dfdc6602 Type 07 Len 0 [17179578.736000] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 6 [17179578.736000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 6 (level, low) -> IRQ 6 [17179578.736000] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [17179578.736000] uhci_hcd 0000:00:1d.0: UHCI Host Controller [17179578.740000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [17179578.740000] uhci_hcd 0000:00:1d.0: irq 6, io base 0x00001800 [17179578.740000] hub 1-0:1.0: USB hub found [17179578.740000] hub 1-0:1.0: 2 ports detected [17179578.812000] ieee1394: Initialized config rom entry `ip1394' [17179578.844000] hub 1-0:1.0: over-current change on port 1 [17179578.844000] **** SET: Misaligned resource pointer: dfdc6102 Type 07 Len 0 [17179578.844000] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 6 [17179578.844000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 6 (level, low) -> IRQ 6 [17179578.844000] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [17179578.844000] uhci_hcd 0000:00:1d.1: UHCI Host Controller [17179578.844000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [17179578.844000] uhci_hcd 0000:00:1d.1: irq 6, io base 0x00001820 [17179578.844000] hub 2-0:1.0: USB hub found [17179578.844000] hub 2-0:1.0: 2 ports detected [17179578.948000] hub 1-0:1.0: over-current change on port 2 [17179578.948000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 6 (level, low) -> IRQ 6 [17179578.948000] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [17179578.948000] uhci_hcd 0000:00:1d.2: UHCI Host Controller [17179578.948000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [17179578.948000] uhci_hcd 0000:00:1d.2: irq 6, io base 0x00001840 [17179578.948000] hub 3-0:1.0: USB hub found [17179578.948000] hub 3-0:1.0: 2 ports detected [17179579.052000] **** SET: Misaligned resource pointer: dfaa89c2 Type 07 Len 0 [17179579.052000] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10 [17179579.052000] ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 10 (level, low) -> IRQ 10 [17179579.052000] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [17179579.052000] ehci_hcd 0000:00:1d.7: EHCI Host Controller [17179579.052000] ehci_hcd 0000:00:1d.7: debug port 1 [17179579.052000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [17179579.052000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4 [17179579.052000] ehci_hcd 0000:00:1d.7: irq 10, io mem 0xd0000000 [17179579.056000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [17179579.056000] hub 4-0:1.0: USB hub found [17179579.056000] hub 4-0:1.0: 6 ports detected [17179579.160000] ohci1394: $Rev: 1313 $ Ben Collins [17179579.160000] ACPI: PCI Interrupt 0000:02:06.2[A] -> Link [LNKE] -> GSI 10 (level, low) -> IRQ 10 [17179579.208000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[10] MMIO=[d020a000-d020a7ff] Max Packet=[2048] [17179579.340000] hub 4-0:1.0: over-current change on port 1 [17179579.444000] hub 4-0:1.0: over-current change on port 2 [17179579.444000] Attempting manual resume [17179579.496000] EXT3-fs: mounted filesystem with ordered data mode. [17179579.508000] kjournald starting. Commit interval 5 seconds [17179579.788000] usb 4-4: new high speed USB device using ehci_hcd and address 2 [17179580.348000] usb 3-2: new low speed USB device using uhci_hcd and address 2 [17179580.480000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00c09f00002230a5] [17179589.848000] Linux agpgart interface v0.101 (c) Dave Jones [17179589.856000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [17179589.864000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [17179589.932000] agpgart: Detected an Intel 855GM Chipset. [17179589.952000] agpgart: AGP aperture is 256M @ 0xe0000000 [17179590.404000] Real Time Clock Driver v1.12 [17179590.876000] ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10 [17179590.876000] PCI: Setting latency timer of device 0000:00:1f.5 to 64 [17179591.192000] intel8x0_measure_ac97_clock: measured 54304 usecs [17179591.192000] intel8x0: clocking to 48000 [17179591.240000] Synaptics Touchpad, model: 1, fw: 5.9, id: 0x126eb1, caps: 0xa04713/0x4000 [17179591.288000] input: SynPS/2 Synaptics TouchPad as /class/input/input1 [17179591.564000] usbcore: registered new driver hiddev [17179591.580000] hw_random: cannot enable RNG, aborting [17179591.588000] ts: Compaq touchscreen protocol output [17179591.880000] input: Logitech USB-PS/2 Optical Mouse as /class/input/input2 [17179591.880000] input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.2-2 [17179591.880000] usbcore: registered new driver usbhid [17179591.880000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver [17179592.196000] ACPI: PCI Interrupt 0000:02:06.0[A] -> Link [LNKE] -> GSI 10 (level, low) -> IRQ 10 [17179592.196000] Yenta: CardBus bridge found at 0000:02:06.0 [1025:0064] [17179592.196000] Yenta: Enabling burst memory read transactions [17179592.196000] Yenta: Using CSCINT to route CSC interrupts to PCI [17179592.196000] Yenta: Routing CardBus interrupts to PCI [17179592.196000] Yenta TI: socket 0000:02:06.0, mfunc 0x01a21b22, devctl 0x64 [17179592.204000] b44.c:v0.97 (Nov 30, 2005) [17179592.204000] ACPI: PCI Interrupt 0000:02:02.0[A] -> Link [LNKD] -> GSI 6 (level, low) -> IRQ 6 [17179592.208000] eth0: Broadcom 4400 10/100BaseT Ethernet 00:c0:9f:4e:82:1e [17179592.220000] ieee80211_1_1_13_crypt: registered algorithm 'NULL' [17179592.220000] ieee80211_1_1_13: 802.11 data/management/control stack, 1.1.13 [17179592.220000] ieee80211_1_1_13: Copyright (C) 2004-2005 Intel Corporation [17179592.224000] ieee80211_crypt: registered algorithm 'NULL' [17179592.228000] ieee80211: 802.11 data/management/control stack, git-1.1.7 [17179592.228000] ieee80211: Copyright (C) 2004-2005 Intel Corporation [17179592.248000] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.1.1 [17179592.248000] ipw2200: Copyright(c) 2003-2006 Intel Corporation [17179592.248000] Warning: PCI driver ipw2200 has a struct device_driver shutdown method, please update! [17179592.248000] ACPI: PCI Interrupt 0000:02:04.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10 [17179592.248000] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection [17179592.436000] ipw2200: Detected geography ZZM (11 802.11bg channels, 0 802.11a channels) [17179592.464000] Yenta: ISA IRQ mask 0x08b8, PCI irq 10 [17179592.464000] Socket status: 30000006 [17179592.464000] Yenta: Raising subordinate bus# of parent bus (#02) from #02 to #06 [17179592.464000] pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff [17179592.464000] cs: IO port probe 0x4000-0x4fff: clean. [17179592.464000] pcmcia: parent PCI bridge Memory window: 0xd0200000 - 0xd05fffff [17179592.464000] pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x32ffffff [17179592.872000] cs: IO port probe 0x100-0x3af: clean. [17179592.876000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 [17179592.876000] cs: IO port probe 0x820-0x8ff: clean. [17179592.876000] cs: IO port probe 0xc00-0xcf7: clean. [17179592.876000] cs: IO port probe 0xa00-0xaff: clean. [17179593.200000] lp: driver loaded but no devices found [17179593.268000] SCSI subsystem initialized [17179593.280000] sbp2: $Rev: 1306 $ Ben Collins [17179593.280000] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1) [17179593.280000] ieee1394: sbp2: Try serialize_io=0 for better performance [17179593.340000] Adding 1140572k swap on /dev/hda7. Priority:-1 extents:1 across:1140572k [17179593.468000] EXT3 FS on hda4, internal journal [17179593.632000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 [17179593.632000] md: bitmap version 4.39 [17179594.280000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com [17179595.704000] b44: eth0: Link is up at 100 Mbps, full duplex. [17179595.704000] b44: eth0: Flow control is on for TX and on for RX. [17179605.736000] NET: Registered protocol family 10 [17179605.736000] lo: Disabled Privacy Extensions [17179605.740000] IPv6 over IPv4 tunneling driver [17179616.580000] eth0: no IPv6 routers present [17179621.864000] kjournald starting. Commit interval 5 seconds [17179621.864000] EXT3 FS on hda6, internal journal [17179621.864000] EXT3-fs: mounted filesystem with ordered data mode. [17179623.752000] NET: Registered protocol family 17 [17179627.312000] ACPI: EC SMBus adapter: name , class , bid SMBC [17179627.324000] ACPI: SBS: [SBS0] [17179627.372000] ACPI: SBS: Smart Battery Charger [SBC] [17179627.448000] ACPI: SBS: Smart Battery Selector [SBSEL] [17179628.352000] ACPI: SBS: Smart Battery Slot [SB0] (battery present) [17179628.376000] ACPI: SBS: Smart Battery Slot [SB1] (battery absent) [17179628.376000] ACPI: SBS: HANDLE dfec7320 [17179628.376000] ACPI: SBS: name , class , bid SBS0 [17179628.468000] ACPI: Power Button (FF) [PWRF] [17179628.468000] ACPI: Lid Switch [LID] [17179628.468000] ACPI: Sleep Button (CM) [SLPB] [17179628.556000] ibm_acpi: ec object not found [17179628.584000] pcc_acpi: loading... [17179628.688000] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [17179631.452000] [drm] Initialized drm 1.0.1 20051102 [17179631.468000] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 6 (level, low) -> IRQ 6 [17179631.468000] [drm] Initialized radeon 1.24.0 20060225 on minor 0 [17179632.356000] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0. [17179632.356000] agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode [17179632.356000] agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode [17179632.484000] ppdev: user-space parallel port driver [17179632.656000] [drm] Setting GART location based on new memory map [17179632.656000] [drm] Loading R300 Microcode [17179632.656000] [drm] writeback test succeeded in 1 usecs [17179632.980000] apm: BIOS not found. [17179642.840000] Bluetooth: Core ver 2.8 [17179642.840000] NET: Registered protocol family 31 [17179642.840000] Bluetooth: HCI device and connection manager initialized [17179642.840000] Bluetooth: HCI socket layer initialized [17179642.928000] Bluetooth: L2CAP ver 2.8 [17179642.928000] Bluetooth: L2CAP socket layer initialized [17179642.960000] Bluetooth: RFCOMM socket layer initialized [17179642.960000] Bluetooth: RFCOMM TTY layer initialized [17179642.960000] Bluetooth: RFCOMM ver 1.7 [17180094.880000] hdc: media error (bad sector): status=0x51 { DriveReady SeekComplete Error } [17180094.880000] hdc: media error (bad sector): error=0x30 { LastFailedSense=0x03 } [17180094.880000] ide: failed opcode was: unknown [17180094.880000] end_request: I/O error, dev hdc, sector 64 [17180094.884000] isofs_fill_super: bread failed, dev=hdc, iso_blknum=16, block=16 [17180804.888000] usb 4-4: USB disconnect, address 2 [17180806.388000] usb 4-3: new high speed USB device using ehci_hcd and address 4 [17185232.024000] usb 4-3: USB disconnect, address 4 [17185233.932000] usb 3-2: USB disconnect, address 2 [17185235.792000] usb 4-6: new high speed USB device using ehci_hcd and address 5 [17185471.172000] usb 4-6: USB disconnect, address 5 [17185474.184000] usb 4-3: new high speed USB device using ehci_hcd and address 6 [17185476.384000] usb 3-2: new low speed USB device using uhci_hcd and address 3 [17185476.572000] input: Logitech USB-PS/2 Optical Mouse as /class/input/input3 [17185476.572000] input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.2-2