Starting kernel ... Uncompressing Linux... done, booting the kernel. [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.0.4-x3 (root@panda-a1-1gb) (gcc version 4.4.5 (Debian 4.4.5-8) ) #1 SMP Tue Aug 30 20:02:28 UTC 2011 [ 0.000000] CPU: ARMv7 Processor [411fc092] revision 2 (ARMv7), cr=10c5387f [ 0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine: OMAP4 Panda board [ 0.000000] Beagle expansionboard: [ 0.000000] Reserving 12582912 bytes SDRAM for VRAM [ 0.000000] Memory policy: ECC disabled, Data cache writealloc [ 0.000000] OMAP4430 ES2.2 [ 0.000000] SRAM: Mapped pa 0x40300000 to va 0xfe400000 size: 0xe000 [ 0.000000] powerdomain: waited too long for powerdomain dss_pwrdm to complete transition [ 0.000000] PERCPU: Embedded 7 pages/cpu @c11a6000 s7712 r8192 d12768 u32768 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 255488 [ 0.000000] Kernel command line: console=ttyO2,115200n8 console=tty0 root=/dev/ram0 rw vram=12MB omapfb.mode=dvi:1280x720MR-16@60 fixrtc bu= [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] allocated 4194304 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Memory: 1006MB = 1006MB total [ 0.000000] Memory: 998704k/998704k available, 49872k reserved, 243712K highmem [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] DMA : 0xffc00000 - 0xffe00000 ( 2 MB) [ 0.000000] vmalloc : 0xf0800000 - 0xf8000000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .init : 0xc0008000 - 0xc0060000 ( 352 kB) [ 0.000000] .text : 0xc0060000 - 0xc08661b4 (8217 kB) [ 0.000000] .data : 0xc0868000 - 0xc08db7d0 ( 462 kB) [ 0.000000] .bss : 0xc08db7f4 - 0xc099f5b0 ( 784 kB) [ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:410 [ 0.000000] omap_hwmod: dpll_mpu_m2_ck: missing clockdomain for dpll_mpu_m2_ck. [ 0.000000] OMAP clockevent source: GPTIMER1 at 32768 Hz [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms [ 0.000000] Console: colour dummy device 80x30 [ 0.000000] console [tty0] enabled [ 0.000366] Calibrating delay loop... 2007.19 BogoMIPS (lpj=7839744) [ 0.070373] pid_max: default: 32768 minimum: 301 [ 0.070556] Security Framework initialized [ 0.070617] AppArmor: AppArmor initialized [ 0.070831] Mount-cache hash table entries: 512 [ 0.071502] Initializing cgroup subsys cpuacct [ 0.071563] Initializing cgroup subsys memory [ 0.071624] Initializing cgroup subsys devices [ 0.071624] Initializing cgroup subsys freezer [ 0.071777] CPU: Testing write buffer coherency: ok [ 0.071990] Calibrating local timer... 491.70MHz. [ 0.117431] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available [ 0.117492] L310 cache controller enabled [ 0.117523] l2x0: 16 ways, CACHE_ID 0x410000c4, AUX_CTRL 0x7e470000, Cache size: 1048576 B [ 0.118347] CPU1: Booted secondary processor [ 0.118347] CPU1: Unknown IPI message 0x1 [ 0.186065] Brought up 2 CPUs [ 0.186096] SMP: Total of 2 processors activated (3972.37 BogoMIPS). [ 0.186492] devtmpfs: initialized [ 0.188446] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for emif_fw [ 0.188446] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l3_instr [ 0.188476] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l3_main_1 [ 0.188476] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l3_main_2 [ 0.188507] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_abe [ 0.188537] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_cfg [ 0.188537] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_per [ 0.188568] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_wkup [ 0.188568] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for mpu_private [ 0.188598] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for dsp [ 0.188598] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for ipu [ 0.188781] omap_hwmod: l3_div_ck: missing clockdomain for l3_div_ck. [ 0.192016] print_constraints: dummy: [ 0.192138] NET: Registered protocol family 16 [ 0.192291] GPMC revision 6.0 [ 0.192932] OMAP GPIO hardware version 0.1 [ 0.193023] OMAP GPIO hardware version 0.1 [ 0.193115] OMAP GPIO hardware version 0.1 [ 0.193206] OMAP GPIO hardware version 0.1 [ 0.193328] OMAP GPIO hardware version 0.1 [ 0.193420] OMAP GPIO hardware version 0.1 [ 0.193695] omap_mux_init: Add partition: #1: core, flags: 2 [ 0.194458] omap_mux_init: Add partition: #2: wkup, flags: 2 [ 0.197052] hw-breakpoint: found 6 breakpoint and 1 watchpoint registers. [ 0.197052] hw-breakpoint: 1 breakpoint(s) reserved for watchpoint single-step. [ 0.197082] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.197540] omap_init_sham: platform not supported [ 0.197540] omap_init_aes: platform not supported [ 0.197937] pm_dbg_init: only OMAP3 supported [ 0.198089] OMAP DMA hardware revision 0.0 [ 0.201141] bio: create slab at 0 [ 0.201507] print_constraints: vwl1271: 1800 mV [ 0.201843] SCSI subsystem initialized [ 0.202392] usbcore: registered new interface driver usbfs [ 0.202453] usbcore: registered new interface driver hub [ 0.202545] usbcore: registered new device driver usb [ 0.217498] omap_i2c omap_i2c.1: bus 1 rev4.0 at 400 kHz [ 0.217834] Skipping twl internal clock init and using bootloader value (unknown osc rate) [ 0.218261] twl6030: PIH (irq 39) chaining IRQs 368..387 [ 0.218597] print_constraints: VUSB: 3300 mV normal standby [ 0.416076] twl6030_usb twl6030_usb: Initialized TWL6030 USB module [ 0.416351] print_constraints: VMMC: 1200 <--> 3000 mV at 3000 mV normal standby [ 0.416656] print_constraints: VPP: 1800 <--> 2500 mV at 1900 mV normal standby [ 0.416839] print_constraints: VCXIO: 1800 mV normal standby [ 0.416992] print_constraints: VDAC: 1800 mV normal standby [ 0.417266] print_constraints: VAUX2_6030: 1200 <--> 2800 mV at 1800 mV normal standby [ 0.417572] print_constraints: VAUX3_6030: 1000 <--> 3000 mV at 1200 mV normal standby [ 0.417968] print_constraints: CLK32KG: [ 0.418121] print_constraints: VANA: 2100 mV normal standby [ 0.429962] omap_i2c omap_i2c.2: bus 2 rev4.0 at 400 kHz [ 0.445190] omap_i2c omap_i2c.3: bus 3 rev4.0 at 100 kHz [ 0.460418] omap_i2c omap_i2c.4: bus 4 rev4.0 at 400 kHz [ 0.460845] Advanced Linux Sound Architecture Driver Version 1.0.24. [ 0.461151] NetLabel: Initializing [ 0.461181] NetLabel: domain hash size = 128 [ 0.461181] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.461212] NetLabel: unlabeled traffic allowed by default [ 0.461364] Switching to clocksource 32k_counter [ 0.467864] AppArmor: AppArmor Filesystem Enabled [ 0.468078] Switched to NOHz mode on CPU #0 [ 0.468994] Switched to NOHz mode on CPU #1 [ 0.473388] musb-hdrc: version 6.0, musb-dma, otg (peripheral+host) [ 0.473663] musb-hdrc musb-hdrc: USB OTG mode controller at fc0ab000 using DMA, IRQ 124 [ 0.473968] NET: Registered protocol family 2 [ 0.474151] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.474822] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.476318] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.477233] TCP: Hash tables configured (established 131072 bind 65536) [ 0.477233] TCP reno registered [ 0.477264] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.477325] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.477722] NET: Registered protocol family 1 [ 0.478027] RPC: Registered named UNIX socket transport module. [ 0.478057] RPC: Registered udp transport module. [ 0.478057] RPC: Registered tcp transport module. [ 0.478088] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.478210] Trying to unpack rootfs image as initramfs... [ 1.066345] Freeing initrd memory: 8416K [ 1.172576] omap_dsp_init: 600000 bytes @ bee00000 [ 1.173065] audit: initializing netlink socket (disabled) [ 1.173095] type=2000 audit(1.179:1): initialized [ 1.319793] highmem bounce pool size: 64 pages [ 1.324462] VFS: Disk quotas dquot_6.5.2 [ 1.324707] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.326995] Registering unionfs 2.5.9 (for 2.6.39-rc5) [ 1.327758] fuse init (API version 7.16) [ 1.328582] Btrfs loaded [ 1.328613] msgmni has been set to 1491 [ 1.329437] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 1.329437] io scheduler noop registered [ 1.329467] io scheduler deadline registered [ 1.329528] io scheduler cfq registered (default) [ 1.391113] OMAP DSS rev 4.0 [ 1.392120] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.641204] omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 104) is a OMAP UART0 [ 1.766113] omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 105) is a OMAP UART1 [ 1.891113] omap_uart.2: ttyO2 at MMIO 0x48020000 (irq = 106) is a OMAP UART2 [ 2.808746] console [ttyO2] enabled [ 2.898925] omap_uart.3: ttyO3 at MMIO 0x4806e000 (irq = 102) is a OMAP UART3 [ 3.027465] brd: module loaded [ 3.032470] loop: module loaded [ 3.036346] omap2-nand driver initializing [ 3.040771] OneNAND driver initializing [ 3.045043] usbcore: registered new interface driver cdc_ether [ 3.051208] usbcore: registered new interface driver rndis_host [ 3.057464] cdc_ncm: 01-June-2011 [ 3.060943] usbcore: registered new interface driver cdc_ncm [ 3.067108] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.074066] ehci-omap ehci-omap.0: OMAP-EHCI Host Controller [ 3.080139] ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 1 [ 3.088012] ehci-omap ehci-omap.0: irq 109, io mem 0x4a064c00 [ 3.102050] ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00 [ 3.108459] hub 1-0:1.0: USB hub found [ 3.112426] hub 1-0:1.0: 3 ports detected [ 3.141113] Initializing USB Mass Storage driver... [ 3.146331] usbcore: registered new interface driver usb-storage [ 3.152648] USB Mass Storage support registered. [ 3.352874] g_ether gadget: using random self ethernet address [ 3.359008] g_ether gadget: using random host ethernet address [ 3.365692] usb0: MAC b6:5d:95:c2:3b:7d [ 3.369720] usb0: HOST MAC a2:dc:f1:42:5f:eb [ 3.374237] g_ether gadget: Ethernet Gadget, version: Memorial Day 2008 [ 3.381195] g_ether gadget: g_ether ready [ 3.385406] musb-hdrc musb-hdrc: MUSB HDRC host driver [ 3.390930] musb-hdrc musb-hdrc: new USB bus registered, assigned bus number 2 [ 3.398864] hub 2-0:1.0: USB hub found [ 3.402801] hub 2-0:1.0: 1 port detected [ 3.407226] mousedev: PS/2 mouse device common for all mice [ 3.413299] i2c /dev entries driver [ 3.417358] lirc_dev: IR Remote Control driver registered, major 250 [ 3.424743] OMAP Watchdog Timer Rev 0x00: initial timeout 60 sec [ 3.431457] device-mapper: uevent: version 1.0.3 [ 3.436523] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com [ 3.445617] device-mapper: multipath: version 1.3.0 loaded [ 3.451416] device-mapper: multipath round-robin: version 1.0.0 loaded [ 3.458557] cpuidle: using governor ladder [ 3.462860] cpuidle: using governor menu [ 3.467010] sdhci: Secure Digital Host Controller Interface driver [ 3.473510] sdhci: Copyright(c) Pierre Ossman [ 3.480590] usbcore: registered new interface driver snd-usb-6fire [ 3.487731] ALSA device list: [ 3.490844] No soundcards found. [ 3.495178] TCP cubic registered [ 3.499114] NET: Registered protocol family 10 [ 3.505676] NET: Registered protocol family 17 [ 3.510559] Registering the dns_resolver key type [ 3.515502] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 1 [ 3.523590] ThumbEE CPU extension supported. [ 3.528076] Registering SWP/SWPB emulation handler [ 3.535644] Power Management for TI OMAP4. [ 3.540008] sr_init: No PMIC hook to init smartreflex [ 3.545410] smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver initialized [ 3.553649] smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver initialized [ 3.561889] smartreflex smartreflex.2: omap_sr_probe: SmartReflex driver initialized [ 3.570098] SmartReflex Class3 initialized [ 3.577728] clock: disabling unused clocks to save power [ 3.583801] registered taskstats version 1 [ 3.588287] fbcvt: 1280x720@60: CVT Name - .921M9-R [ 3.618408] Console: switching to colour frame buffer device 160x45 [ 3.633453] regulator_init_complete: VANA: incomplete constraints, leaving on [ 3.641876] regulator_init_complete: VDAC: incomplete constraints, leaving on [ 3.649749] regulator_init_complete: VCXIO: incomplete constraints, leaving on [ 3.658020] regulator_init_complete: VUSB: incomplete constraints, leaving on [ 3.665618] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 3.672485] Freeing init memory: 352K [ 3.711517] usb 1-1: new high speed USB device number 2 using ehci-omap [ 3.856414] mmc0: host does not support reading read-only switch. assuming write-enable. [ 3.868988] hub 1-1:1.0: USB hub found [ 3.874359] hub 1-1:1.0: 5 ports detected [ 3.910736] mmc0: new SDHC card at address 0002 [ 3.955841] mmcblk0: mmc0:0002 00000 14.9 GiB [ 3.967468] mmcblk0: p1 [ 4.107910] mmc1: card claims to support voltages below the defined range. These will be ignored. [ 4.150024] mmc1: queuing unknown CIS tuple 0x91 (3 bytes) [ 4.160736] mmc1: new SDIO card at address 0001 [ 4.227325] usb 1-1.1: new high speed USB device number 3 using ehci-omap