rendered paste bodysamco@samco-desktop:~$ dmesg
[ 0.000000] Linux version 2.6.24-14-generic (buildd@palmer) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Thu Apr 3 04:49:29 UTC 2008 (Ubuntu 2.6.24-14.25-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007f7f0000 (usable)
[ 0.000000] BIOS-e820: 000000007f7f0000 - 000000007f7f3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007f7f3000 - 000000007f800000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] 1143MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000f3bc0
[ 0.000000] Entering add_active_range(0, 0, 522224) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 522224
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 522224
[ 0.000000] On node 0 totalpages: 522224
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2287 pages used for memmap
[ 0.000000] HighMem zone: 290561 pages, LIFO batch:31
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI 2.4 present.
[ 0.000000] ACPI: RSDP signature @ 0xC00F7540 checksum 0
[ 0.000000] ACPI: RSDP 000F7540, 0014 (r0 IntelR)
[ 0.000000] ACPI: RSDT 7F7F3040, 0038 (r1 IntelR AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: FACP 7F7F30C0, 0074 (r1 IntelR AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: DSDT 7F7F3180, 472B (r1 INTELR AWRDACPI 1000 MSFT 100000E)
[ 0.000000] ACPI: FACS 7F7F0000, 0040
[ 0.000000] ACPI: MCFG 7F7F7A00, 003C (r1 IntelR AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: APIC 7F7F7900, 0084 (r1 IntelR AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: SSDT 7F7F7A80, 019E (r1 PmRef Cpu0Ist 3000 INTL 20040311)
[ 0.000000] ACPI: SSDT 7F7F7F10, 02F1 (r1 PmRef CpuPm 3000 INTL 20040311)
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:15 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] Processor #1 6:15 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 7f800000:60800000)
[ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 518145
[ 0.000000] Kernel command line: root=UUID=721fb302-da6f-4421-8faa-e4f420a2e011 ro quiet splash
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 2199.815 MHz processor.
[ 20.504799] Console: colour VGA+ 80x25
[ 20.504803] console [tty0] enabled
[ 20.505009] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 20.505224] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 20.579413] Memory: 2059024k/2088896k available (2164k kernel code, 28564k reserved, 1006k data, 364k init, 1171392k highmem)
[ 20.579419] virtual kernel memory layout:
[ 20.579420] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB)
[ 20.579421] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 20.579421] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 20.579422] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 20.579423] .init : 0xc041f000 - 0xc047a000 ( 364 kB)
[ 20.579424] .data : 0xc031d1cd - 0xc0418dc4 (1006 kB)
[ 20.579425] .text : 0xc0100000 - 0xc031d1cd (2164 kB)
[ 20.579427] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 20.579466] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
[ 20.659404] Calibrating delay using timer specific routine.. 4403.26 BogoMIPS (lpj=8806539)
[ 20.659431] Security Framework initialized
[ 20.659436] SELinux: Disabled at boot.
[ 20.659448] AppArmor: AppArmor initialized
[ 20.659451] Failure registering capabilities with primary security module.
[ 20.659458] Mount-cache hash table entries: 512
[ 20.659573] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e39d 00000000 00000001 00000000
[ 20.659580] monitor/mwait feature present.
[ 20.659581] using mwait in idle threads.
[ 20.659584] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 20.659586] CPU: L2 cache: 1024K
[ 20.659589] CPU: Physical Processor ID: 0
[ 20.659590] CPU: Processor Core ID: 0
[ 20.659592] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e39d 00000000 00000001 00000000
[ 20.659599] Compat vDSO mapped to ffffe000.
[ 20.659610] Checking 'hlt' instruction... OK.
[ 20.675739] SMP alternatives: switching to UP code
[ 20.677046] Early unpacking initramfs... done
[ 20.934655] ACPI: Core revision 20070126
[ 20.934692] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 20.944676] CPU0: Intel(R) Pentium(R) Dual CPU E2200 @ 2.20GHz stepping 0d
[ 20.944690] SMP alternatives: switching to SMP code
[ 20.945249] Booting processor 1/1 eip 3000
[ 20.955293] Initializing CPU#1
[ 21.035014] Calibrating delay using timer specific routine.. 4399.80 BogoMIPS (lpj=8799616)
[ 21.035020] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e39d 00000000 00000001 00000000
[ 21.035024] monitor/mwait feature present.
[ 21.035027] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 21.035028] CPU: L2 cache: 1024K
[ 21.035030] CPU: Physical Processor ID: 0
[ 21.035031] CPU: Processor Core ID: 1
[ 21.035032] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e39d 00000000 00000001 00000000
[ 21.035387] CPU1: Intel(R) Pentium(R) Dual CPU E2200 @ 2.20GHz stepping 0d
[ 21.035403] Total of 2 processors activated (8803.07 BogoMIPS).
[ 21.035547] ENABLING IO-APIC IRQs
[ 21.035714] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 21.182960] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 21.202952] Brought up 2 CPUs
[ 21.202973] CPU0 attaching sched-domain:
[ 21.202975] domain 0: span 03
[ 21.202977] groups: 01 02
[ 21.202979] CPU1 attaching sched-domain:
[ 21.202980] domain 0: span 03
[ 21.202982] groups: 02 01
[ 21.203149] net_namespace: 64 bytes
[ 21.203154] Booting paravirtualized kernel on bare hardware
[ 21.203520] Time: 14:06:07 Date: 04/04/08
[ 21.203564] NET: Registered protocol family 16
[ 21.203715] EISA bus registered
[ 21.203719] ACPI: bus type pci registered
[ 21.230391] PCI: PCI BIOS revision 3.00 entry at 0xfa110, last bus=1
[ 21.230393] PCI: Using configuration type 1
[ 21.230394] Setting up standard PCI resources
[ 21.242366] ACPI: EC: Look up EC in DSDT
[ 21.245786] ACPI: Interpreter enabled
[ 21.245789] ACPI: (supports S0 S3 S4 S5)
[ 21.245800] ACPI: Using IOAPIC for interrupt routing
[ 21.249807] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 21.250272] Force enabled HPET at base address 0xfed00000
[ 21.250277] PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
[ 21.250280] PCI quirk: region 0480-04bf claimed by ICH6 GPIO
[ 21.250498] PCI: Transparent bridge - 0000:00:1e.0
[ 21.250517] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 21.250638] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 21.257997] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[ 21.258084] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 21.258169] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *9 10 11 12 14 15)
[ 21.258253] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[ 21.258336] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[ 21.258420] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 21.258505] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 21.258590] ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 7 9 10 11 12 14 15)
[ 21.258694] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 21.258720] pnp: PnP ACPI init
[ 21.258726] ACPI: bus type pnp registered
[ 21.260996] pnpacpi: exceeded the max number of mem resources: 12
[ 21.261045] pnp: PnP ACPI: found 15 devices
[ 21.261046] ACPI: ACPI bus type pnp unregistered
[ 21.261051] PnPBIOS: Disabled by ACPI PNP
[ 21.261232] PCI: Using ACPI for IRQ routing
[ 21.261234] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 21.287011] NET: Registered protocol family 8
[ 21.287012] NET: Registered protocol family 20
[ 21.287137] hpet clockevent registered
[ 21.287141] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 21.287146] hpet0: 3 64-bit timers, 14318180 Hz
[ 21.288177] AppArmor: AppArmor Filesystem Enabled
[ 21.290875] Time: tsc clocksource has been installed.
[ 21.315021] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
[ 21.315025] system 00:01: ioport range 0x290-0x29f has been reserved
[ 21.315029] system 00:01: ioport range 0x800-0x87f has been reserved
[ 21.315032] system 00:01: ioport range 0x880-0x88f has been reserved
[ 21.315047] system 00:0b: ioport range 0x400-0x4bf could not be reserved
[ 21.315057] system 00:0d: iomem range 0xe0000000-0xefffffff could not be reserved
[ 21.315065] system 00:0e: iomem range 0xcc000-0xcffff has been reserved
[ 21.315069] system 00:0e: iomem range 0xd9400-0xdbfff has been reserved
[ 21.315072] system 00:0e: iomem range 0xf0000-0xfbfff could not be reserved
[ 21.315076] system 00:0e: iomem range 0xfc000-0xfffff could not be reserved
[ 21.315090] system 00:0e: iomem range 0x7f7f0000-0x7f7fffff could not be reserved
[ 21.315093] system 00:0e: iomem range 0x0-0x9ffff could not be reserved
[ 21.315095] system 00:0e: iomem range 0x100000-0x7f7effff could not be reserved
[ 21.315097] system 00:0e: iomem range 0x0-0x0 could not be reserved
[ 21.315099] system 00:0e: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 21.315101] system 00:0e: iomem range 0xfed13000-0xfed1dfff could not be reserved
[ 21.315103] system 00:0e: iomem range 0xfed20000-0xfed8ffff could not be reserved
[ 21.315105] system 00:0e: iomem range 0xfee00000-0xfee00fff could not be reserved
[ 21.345382] PCI: Bridge: 0000:00:1e.0
[ 21.345384] IO window: e000-efff
[ 21.345388] MEM window: fde00000-fdefffff
[ 21.345392] PREFETCH window: fdd00000-fddfffff
[ 21.345404] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 21.345413] NET: Registered protocol family 2
[ 21.387199] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 21.387399] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 21.387836] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 21.388196] TCP: Hash tables configured (established 131072 bind 65536)
[ 21.388198] TCP reno registered
[ 21.399352] checking if image is initramfs... it is
[ 21.786878] Switched to high resolution mode on CPU 1
[ 21.790777] Switched to high resolution mode on CPU 0
[ 21.907239] Freeing initrd memory: 7262k freed
[ 21.907865] audit: initializing netlink socket (disabled)
[ 21.907879] audit(1207317968.204:1): initialized
[ 21.908064] highmem bounce pool size: 64 pages
[ 21.909538] VFS: Disk quotas dquot_6.5.1
[ 21.909598] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 21.909700] io scheduler noop registered
[ 21.909702] io scheduler anticipatory registered
[ 21.909703] io scheduler deadline registered
[ 21.909711] io scheduler cfq registered (default)
[ 21.909723] Boot video device is 0000:00:02.0
[ 21.909974] isapnp: Scanning for PnP cards...
[ 22.262843] isapnp: No Plug & Play device found
[ 22.281864] Real Time Clock Driver v1.12ac
[ 22.281953] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 22.282061] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 22.282575] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 22.283474] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 22.283526] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 22.283607] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 22.286571] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 22.286575] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 22.306894] mice: PS/2 mouse device common for all mice
[ 22.306981] EISA: Probing bus 0 at eisa.0
[ 22.307009] EISA: Detected 0 cards.
[ 22.307012] cpuidle: using governor ladder
[ 22.307013] cpuidle: using governor menu
[ 22.307084] NET: Registered protocol family 1
[ 22.307107] Using IPI No-Shortcut mode
[ 22.307131] registered taskstats version 1
[ 22.307198] Magic number: 4:834:130
[ 22.307261] hash matches device PNP0C02:02
[ 22.307268] hash matches device device:05
[ 22.307272] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 22.307274] EDD information not available.
[ 22.307413] Freeing unused kernel memory: 364k freed
[ 22.338711] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 23.481808] fuse init (API version 7.9)
[ 23.493176] ACPI: Fan [FAN] (on)
[ 23.497563] ACPI: SSDT 7F7F7E80, 0087 (r1 PmRef Cpu1Ist 3000 INTL 20040311)
[ 23.497687] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126]
[ 23.497695] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126]
[ 23.498780] ACPI: Thermal Zone [THRM] (40 C)
[ 23.659881] usbcore: registered new interface driver usbfs
[ 23.659901] usbcore: registered new interface driver hub
[ 23.659945] usbcore: registered new device driver usb
[ 23.660892] USB Universal Host Controller Interface driver v3.0
[ 23.660941] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 16
[ 23.660951] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 23.660954] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 23.661190] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 23.661230] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000fe00
[ 23.661350] usb usb1: configuration #1 chosen from 1 choice
[ 23.661368] hub 1-0:1.0: USB hub found
[ 23.661373] hub 1-0:1.0: 2 ports detected
[ 23.765233] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 17
[ 23.765243] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 23.765246] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 23.765265] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 23.765290] uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000fd00
[ 23.765380] usb usb2: configuration #1 chosen from 1 choice
[ 23.765398] hub 2-0:1.0: USB hub found
[ 23.765402] hub 2-0:1.0: 2 ports detected
[ 23.787930] 8139too Fast Ethernet driver 0.9.28
[ 23.823690] SCSI subsystem initialized
[ 23.847905] libata version 3.00 loaded.
[ 23.860120] Floppy drive(s): fd0 is 1.44M
[ 23.869089] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 23.869098] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 23.869102] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 23.869122] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 23.869146] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fc00
[ 23.869232] usb usb3: configuration #1 chosen from 1 choice
[ 23.869251] hub 3-0:1.0: USB hub found
[ 23.869255] hub 3-0:1.0: 2 ports detected
[ 23.879639] FDC 0 is a post-1991 82077
[ 23.972972] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 19
[ 23.972984] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 23.972988] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 23.973011] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[ 23.973038] uhci_hcd 0000:00:1d.3: irq 19, io base 0x0000fb00
[ 23.973132] usb usb4: configuration #1 chosen from 1 choice
[ 23.973151] hub 4-0:1.0: USB hub found
[ 23.973155] hub 4-0:1.0: 2 ports detected
[ 24.076919] ACPI: PCI Interrupt 0000:01:05.0[A] -> GSI 20 (level, low) -> IRQ 20
[ 24.077059] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 16
[ 24.077070] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 24.077075] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 24.077095] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[ 24.077676] eth0: RealTek RTL8139 at 0xee00, 00:50:8d:c9:c0:39, IRQ 20
[ 24.077679] eth0: Identified 8139 chip type 'RTL-8100B/8139D'
[ 24.080991] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 24.080997] ehci_hcd 0000:00:1d.7: irq 16, io mem 0xfdfff000
[ 24.084906] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 24.096740] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 24.096845] usb usb5: configuration #1 chosen from 1 choice
[ 24.096865] hub 5-0:1.0: USB hub found
[ 24.096871] hub 5-0:1.0: 8 ports detected
[ 24.199801] ata_piix 0000:00:1f.2: version 2.12
[ 24.199808] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[ 24.199834] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 17
[ 24.199863] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 24.200816] scsi0 : ata_piix
[ 24.201370] scsi1 : ata_piix
[ 24.201814] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14
[ 24.201817] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15
[ 24.382051] ata1.00: ATA-7: WDC WD1600AAJS-00PSA0, 05.06H05, max UDMA/133
[ 24.382055] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 24.397729] ata1.00: configured for UDMA/133
[ 24.731374] ata2.00: ATAPI: PBDS CD-ROM DH-48N1P, AD11, max UDMA/33
[ 24.919101] ata2.00: configured for UDMA/33
[ 24.919208] scsi 0:0:0:0: Direct-Access ATA WDC WD1600AAJS-0 05.0 PQ: 0 ANSI: 5
[ 24.929665] scsi 1:0:0:0: CD-ROM PBDS CD-ROM DH-48N1P AD11 PQ: 0 ANSI: 5
[ 24.939552] Driver 'sd' needs updating - please use bus_type methods
[ 24.939627] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 24.939637] sd 0:0:0:0: [sda] Write Protect is off
[ 24.939639] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 24.939653] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 24.939695] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 24.939703] sd 0:0:0:0: [sda] Write Protect is off
[ 24.939705] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 24.939718] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 24.939721] sda:<4>Driver 'sr' needs updating - please use bus_type methods
[ 24.947981] sda1 sda2 < sda5 >
[ 24.972076] sd 0:0:0:0: [sda] Attached SCSI disk
[ 24.975853] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 24.975872] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 24.979886] sr0: scsi3-mmc drive: 0x/48x cd/rw xa/form2 cdda tray
[ 24.979890] Uniform CD-ROM driver Revision: 3.20
[ 24.979934] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 25.097500] Attempting manual resume
[ 25.097503] swsusp: Resume From Partition 8:5
[ 25.097504] PM: Checking swsusp image.
[ 25.097686] PM: Resume from disk failed.
[ 25.134962] kjournald starting. Commit interval 5 seconds
[ 25.134969] EXT3-fs: mounted filesystem with ordered data mode.
[ 29.630634] Linux agpgart interface v0.102
[ 29.675928] agpgart: Detected an Intel 945G Chipset.
[ 29.676364] agpgart: Detected 7932K stolen memory.
[ 29.689063] agpgart: AGP aperture is 256M @ 0xd0000000
[ 29.742578] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 30.002266] parport_pc 00:08: reported by Plug and Play ACPI
[ 30.002339] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 30.066778] input: Power Button (FF) as /devices/virtual/input/input3
[ 30.091714] intel_rng: FWH not detected
[ 30.098042] ACPI: Power Button (FF) [PWRF]
[ 30.098103] input: Power Button (CM) as /devices/virtual/input/input4
[ 30.130013] ACPI: Power Button (CM) [PWRB]
[ 30.162009] iTCO_vendor_support: vendor-support=0
[ 30.198550] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
[ 30.732755] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 19
[ 30.732779] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 30.766126] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
[ 30.785949] eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1
[ 30.908243] input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input5
[ 31.030975] iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0460)
[ 31.031005] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 31.221805] NET: Registered protocol family 10
[ 31.221986] lo: Disabled Privacy Extensions
[ 31.908375] lp0: using parport0 (interrupt-driven).
[ 31.966554] Adding 6056464k swap on /dev/sda5. Priority:-1 extents:1 across:6056464k
[ 32.571011] EXT3 FS on sda1, internal journal
[ 33.566690] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 33.912607] No dock devices found.
[ 35.112614] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[ 35.112619] apm: disabled - APM is not SMP safe.
[ 35.234153] ppdev: user-space parallel port driver
[ 37.102365] Bluetooth: Core ver 2.11
[ 37.102853] NET: Registered protocol family 31
[ 37.102857] Bluetooth: HCI device and connection manager initialized
[ 37.102862] Bluetooth: HCI socket layer initialized
[ 37.122221] Bluetooth: L2CAP ver 2.9
[ 37.122227] Bluetooth: L2CAP socket layer initialized
[ 37.211379] Bluetooth: RFCOMM socket layer initialized
[ 37.211395] Bluetooth: RFCOMM TTY layer initialized
[ 37.211398] Bluetooth: RFCOMM ver 1.8
[ 40.108986] [drm] Initialized drm 1.1.0 20060810
[ 40.111459] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 19
[ 40.111470] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 40.111535] [drm] Initialized i915 1.6.0 20060119 on minor 0
[ 41.260545] eth0: no IPv6 routers present
[ 89.491062] rtai_hal: disagrees about version of symbol struct_module
[ 89.506264] latency_rt: disagrees about version of symbol struct_module
[ 104.629287] rtai_hal: disagrees about version of symbol struct_module
[ 104.644390] latency_rt: disagrees about version of symbol struct_module
[12892.889762] rtai_hal: disagrees about version of symbol struct_module
[12892.914533] latency_rt: disagrees about version of symbol struct_module
[12982.734251] rtai_hal: disagrees about version of symbol struct_module
[12982.749153] latency_rt: disagrees about version of symbol struct_module
samco@samco-desktop:~$