rendered paste bodyNTOSD U-Boot 1.1.4 (Mar 7 2008 - 09:21:38)
U-Boot code: 01400000 -> 0143899C BSS: -> 0146D738
RAM Configuration:
Bank #0: 01100000 64 MB
Manuf. ID @ 0x00100000: 0x00000020
Device ID @ 0x00100001: 0x0000007e
Flash: 16 MB
In: serial
Out: serial
Err: serial
DM320 Rev. B/C
initial i2c interface
Initializing Ethernet
found DM9000 at address 60000300:0x02 !
[eth_init]MAC:0:18:11:80:11:52:
Neuros Technologies OSD Controller (c) 2005
Ingenient Technologies NTSC/PAL Video Controller (c) 2005
Ingenient Technologies LCD Controller (c) 2005
Configuring video encoder for NTSC
CFG_FLAG_ADDR = 3300000
CFG_PACKAGE_ADDR = 3301000
Bus 0: OK
Device 0: Model: HMS360604D5CF00 Firm: DP4OC40D Ser#: ND4P554B6R1KAE
Type: Removable Hard Disk
Capacity: 3906.0 MB = 3.8 GB (7999488 x 512)
Device 1: Bad status 0x0
not available
Hit any key to stop autoboot: 3 2 1 0
## Booting image at 00160000 ...
Image Name: Linux-2.6.15
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 1267816 Bytes = 1.2 MB
Load Address: 01108000
Entry Point: 01108000
Verifying Checksum ... OK
OK
Starting kernel ...
Uncompressing Linux..................................................................................... done, booting the kernel.
Linux version 2.6.15 (pqiu@localhost.localdomain) (gcc version 3.4.6) #1 PREEMPT Fri Mar 7 09:26:09 CST 2008
CPU: ARM926EJ-Sid(wb) [41069263] revision 3 (ARMv5TEJ)
Machine: IT DM320-20
Memory policy: ECC disabled, Data cache writeback
CPU0: D VIVT write-back cache
CPU0: I cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets
CPU0: D cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets
Built 1 zonelists
Kernel command line: console=ttyS0,115200n8 root=/dev/mtdblock4 ro ip=192.168.1.100:192.168.1.1:192.168.1.1:255.0.0.0:neuros::off mem=34M
PID hash table entries: 256 (order: 8, 4096 bytes)
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 34MB = 34MB total
Memory: 31696KB available (2207K code, 421K data, 96K init)
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
NET: Registered protocol family 16
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
NetWinder Floating Point Emulator V0.97 (double precision)
JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
yaffs Mar 7 2008 09:23:55 Installing.
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
Software Watchdog Timer: 0.07 initialized. soft_noboot=0 soft_margin=60 sec (nowayout= 0)
Ingenient Technologies LED Driver 1.0
Ingenient Technologies DM320 Timer Driver
Ingenient Technologies TI SoC Serial Driver 1.0
ttyS0 at MMIO 0xe0030300 (irq = 12) is a IT SoC
ttyS1 at MMIO 0xe0030380 (irq = 13) is a IT SoC
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
loop: loaded (max 8 devices)
DM9000 Ethernet chip uses A0
eth0: at 0xc2860300 IRQ 27
eth0: Ethernet addr: 00:18:11:80:11:52
Ingenient Technologies I2C Adapter
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
Ingenient onboard IDE/CFC configured as device 0
__init ide_generic_init-----
CFA DISK drive
ide0 at 0xe3000000-0xe3000007,0xe300000e on irq 18
hda: max request size: 128KiB
hda: 7999488 sectors (4095 MB) w/128KiB Cache, CHS=7936/16/63
hda: cache flushes supported
hda: hda1 hda2
Neuros NOR flash device: 1000000 at 100000
Flash device virtual mapping at c2880000
Neuros OSD NOR Flash: Found 1 x16 devices at 0x0 in 16-bit bank
Amd/Fujitsu Extended Query Table at 0x0040
Neuros OSD NOR Flash: CFI does not contain boot bank location. Assuming top.
number of CFI chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
cmdlinepart partition parsing not available
Using Neuros partition definition
Creating 5 MTD partitions on "Neuros OSD NOR Flash":
0x00000000-0x00040000 : "bootloader"
0x00040000-0x00060000 : "u-env"
0x00060000-0x001e0000 : "kernel"
0x001e0000-0x00f00000 : "cramfs"
0x00f00000-0x01000000 : "jffs2"
usbmon: debugfs is not available
dm320: driver DM320-USB-HCD, 27 Oct. 2006
DM320-USB-HCD DM320-USB-HCD.0: USB Host Controller
DM320-USB-HCD DM320-USB-HCD.0: new USB bus registered, assigned bus number 1
DM320-USB-HCD DM320-USB-HCD.0: irq 15, io mem 0x80000000
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
Configure the MMC card controler
Configure the MS card controler
NET: Registered protocol family 2
IP route cache hash table entries: 512 (order: -1, 2048 bytes)
TCP established hash table entries: 2048 (order: 1, 8192 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP reno registered
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
IP-Config: Complete:
device=eth0, addr=192.168.1.100, mask=255.0.0.0, gw=192.168.1.1,
host=neuros, domain=, nis-domain=(none),
bootserver=192.168.1.1, rootserver=192.168.1.1, rootpath=
VFS: Mounted root (cramfs filesystem) readonly.
Freeing init memory: 96K
init started: BusyBox v1.6.1 (2008-03-07 09:21:24 CST) multi-call binary
starting pid 647, tty '': '/etc/init.d/rcS'
/etc/init.d/rc: line 72: cannot create /mnt/tmpfs/startup.txt: Read-only file system
/etc/init.d/rc: line 72: cannot create /mnt/tmpfs/startup.txt: Read-only file system
mount: mounting /dev/mtd6 on /mnt/tmpfs/mount_NAND failed
hda: hda1 hda2
hda: hda1 hda2
EXT2-fs warning (device hda1): ext2_fill_super: mounting ext3 filesystem as ext2
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
Passwd Exists
Group file Exists
ld.so.conf exists and is not copied
ld.so.cache exists and is not generated
Shadow file Exists
Shadow file Exists
gshadow file Exists
Networking Config Exists
Network Setup Failed
/sbin/fusermount
Starting FUSE: fuse init (API version 7.8)
fuse distribution version: 2.6.5
done.
Networking Config Exists
rootfs is not nfs, setting up network
cat: can't open '/mnt/OSD/sysconfig/video.ini': No such file or directory
Network Setup Failed
imanage: module license 'Ingenient Technologies, Inc.' taints kernel.
Ingenient Technologies DSP/Memory CODEC Controller (c) 2004-2007
Ingenient Technologies Messaging Control System (c) 2004-2005
Ingenient Technologies Memory Manager System (c) 2004-2007
Ingenient Technologies DM320 DSP Control System (c) 2004-2007
Ingenient Technologies McBSP Registers Driver (c) 2005-2006
Ingenient Technologies Buffer Manager Driver (c) 2006
Ingenient Technologies - FrameBuffer Driver (c) 2004-2006
Registering unionfs 1.1.5
cat: can't open '/mnt/OSD/sysconfig/video.ini': No such file or directory
Ingenient Technologies Video I/O Driver (c) 2004-2005
Ingenient Technologies NTSC/PAL Video Controller (c) 2004-2006
Ingenient Technologies LCD Controller (c) 2004-2006
Ingenient Technologies OSD Controller (c) 2004-2007
Ingenient Technologies CCD Controller (c) 2004-2005
Ingenient Technologies Preview Engine Controller (c) 2004-2006
Ingenient Technologies Resizing scheduler (c) 2007
Ingenient Technologies Video Capture System (c) 2004-2007
Ingenient Technologies Window Display Driver (c) 2005-2007
Ingenient Technologies Multichannel Video Render Driver (c) 2006-2007
Ingenient Technologes TI AIC23 Audio Controller Driver (c) 2004-2006
Ingenient Technologes TI TVP5150A NTSC/PAL Video Decoder (c) 2004-2006
Ingenient Technologies Encoder Driver Framework (c) 2004-2007
Ingenient Technologies Image Encoder Driver (c) 2004-2006
Ingenient Technologies Video Encoder Driver (c) 2004-2007
Ingenient Technologies Audio Encoder Driver (c) 2004-2007
Ingenient Technologies Decoder Driver Framework (c) 2004-2007
Ingenient Technologies Image Decoder Driver (c) 2004-2007
Ingenient Technologies Video Decoder Driver (c) 2004-2007
Ingenient Technologies Audio Decoder Driver (c) 2004-2007
Ingenient Technologies Subtitle Decoder Driver (c) 2004-2007
Ingenient Technologies - MPEG4 Video Codec Plugins (c) 2004-2005
Ingenient Technologies - MPEG4 Video Encoder Codec Plugin (c) 2004-2007
Ingenient Technologies - MPEG4 Video Decoder Codec Plugin (c) 2004-2007
Ingenient Technologies Audio I/O Driver (c) 2007
Ingenient Technologies - PCM Audio Codec Plugins (c) 2004-2007
Ingenient Technologies - PCM Audio Encoder Codec Plugin (c) 2005-2007
Ingenient Technologies - PCM Audio Decoder Codec Plugin (c) 2004-2007
Ingenient Technologies - DM320 MPEG4 + PCM Encoders (c) 2005-2006
Ingenient Technologies - DM320 MPEG4 (QVGA) + PCM Encoder (c) 2005-2006
Ingenient Technologies - DM320 MPEG4 (VGA) + PCM Encoder (c) 2005-2006
MSP430 I2C Driver (c) 2006
Neuros Neuros_Generic Driver (c) 2006
Neuros RTC Driver (c) 2006
Neuros IR Driver (c) 2006
input: neuros_ir as /class/input/input0
Neuros IR Blaster Driver (c) 2006
Ingenient Technologies - IMAGE Decode Plugin (c) 2004-2005
Ingenient Technologies - DM320 JPEG Image Encoder (c) 2004-2006
Ingenient Technologies - DM320 JPEG Image Encoder/Decoder (c) 2005-2006
Ingenient Technologies - DM320 JPEG Image Decoder (c) 2004-2006
Ingenient Technologies - DM320 JPEG Image + PCM Decoder (c) 2005-2006
ubootcmd version 1.02
no upgrade_type in environmet
cat: can't open '/mnt/OSD/sysconfig/video.ini': No such file or directory
Log output will be stored in /var/log/xmms2d.log
***************************************
Warning! You are running XMMS2D as root, this is a bad idea!
But I'll allow it since you asked nicely.
***************************************
INFO: ../src/xmms/log.c:35: Initialized logging system :)
INFO: ../src/xmms/config.c:710: Using config file [/mnt/OSD/xmms2/xmms2d.conf].
INFO: ../src/xmms/ipc.c:893: IPC listening on 'unix:///var/tmp/xmms-ipc-root'.
[0;42;30m[907] ./../src/server/server-monitor-nms.c--SrvStartMonitorGarbageCollector: 451[0m
[MONGC] Starting monitor garbage collector.
[0;42;30m[907] ./../src/server/server-monitor-nms.c--SrvStartMonitorGarbageCollector: 464[0m
[MONGC] Monitor garbage collector created successfully.
[0;42;30m[907] ./../src/srvmain.c--main: 103[0m
nms server started.[0;42;30m[911] ./../src/server/server-monitor-nms.c--garbageLoop: 392[0m
[MONGC] ==== count is 0
[0;42;30m[911] ./../src/server/server-monitor-nms.c--start_srv: 136[0m
Requested to start video monitor. (active: 0).
[0;42;30m[911] ./../src/server/server-monitor-nms.c--start_srv: 146[0m
Monitor was stopped, starting it.
[0;42;30m[911] ./../src/server/server-monitor-nms.c--start_srv: 169[0m
Output activate mode: 0.
WARNING:find_display_params():[809] IMAF_IDISPLAY: Device name [INTERNAL] Mode [576i].
WARNING:find_display_params():[809] IMAF_IDISPLAY: Device name [LCD] Mode [VGA].
WARNING:find_display_params():[809] IMAF_IDISPLAY: Device name [LCD] Mode [QVGA].
[0;42;30m[911] ./../src/server/server-monitor-nms.c--start_srv: 174[0m
Input initializing.
INFO: ../src/xmms/main.c:500: Using output plugin: nms
INFO: ../src/xmms/thread_priority.c:63: Changing priority of "medialib" thread (PID 913) from 0 to 16.
INFO: ../src/xmms/thread_priority.c:63: Changing priority of "filler" thread (PID 914) from 0 to -8.
production ID: [Neuros OSD Pilot Launch]
released on: [ÿÿÿÿÿÿÿÿAugust 20, 2006]
INFO: ../src/xmms/thread_priority.c:63: Changing priority of "output_writer" thread (PID 915) from 0 to -8.
xmms2 started
Creating lighttpd Config in flash memory
Starting DJMOUNT: WARNING:find_capture_params():[1160] IMAF_ICAPTURE: Device name [TVP5150] Mode [480i_field].
iosd_set_passthru: window:0 enable:0 pip:0
iosd_set_passthru: window:1 enable:0 pip:0
tvp5150_select_input:241> NTSC selected ..........
IOSD(KM): iosd_set_video_display: window:0, dimensions:720x240
IOSD(KM): set_video_position: win:0, left:0, top:0, right:719, bottom:239
CODEC_PLUGIN_PCM_ENC(KM): Starting the Audio Encoder: 6.
IAUDIO(KM): Setting Sample Rate to 44100.
CODEC_PLUGIN_PCM_ENC(KM): PCM Encoder Version 0.501.34, return code = 0.
Buffer 1: 0xE714F8C0
Buffer 2: 0xE71518C0
Buffer Size: 0x00002000 bytes
SBuffer: 0xE714F8C0
SBuffer Size: 0x00004000 bytes
iosd_set_passthru: window:0 enable:2 pip:0
[0;42;30m[911] ./../src/server/server-monitor-nms.c--start_srv: 202[0m
Video monitor started successfully.
bufmgr_hold_buffer:387> BUFMGR(KM): Holding buffer 0x00000000 not in used list
[34m[I] Mount options = search_history=0[0m
done.
Ingenient Technologies - MPEG2 Video Codec Plugins (c) 2004-2006
Ingenient Technologies - MPEG2 Video Decoder Codec Plugin (c) 2004-2006
Ingenient Technologies - WMV Video Codec Plugins (c) 2004-2006
Ingenient Technologies - WMV Video Decoder Codec Plugin (c) 2004-2007
Ingenient Technologies - DIVX311 Video Codec Plugins (c) 2004-2006
Ingenient Technologies - DIVX311 Video Decoder Codec Plugin (c) 2004-2006
Ingenient Technologies - G.7XX Audio Codec Plugins (c) 2004-2007
Ingenient Technologies - G.711/G.726 Audio Encoder Codec Plugin (c) 2004-2007
Ingenient Technologies - G.711/G.726 Audio Decoder Codec Plugin (c) 2004-2007
[0;46;30m[970] WARNING: ./../src/upgrade.c--CoolExtStorageIsRdy: 1271[0m
statfsbuf.f_type = 1021994
Ingenient Technologies - DM320 DivX 3.11 + PCM Decoder (c) 2004-2006
Ingenient Technologies - DM320 WMV9 + WMA + PCM Decoder (c) 2004-2006
Ingenient Technologies - DM320 MPEG2 + PCM Decoder (c) 2004-2006
Ingenient Technologies - DM320 MPEG4-SP + PCM Decoder (c) 2004-2006
Ingenient Technologies - DM320 MPEG4 + G.711 + G.726 Encoders (c) 2004-2006
MPEG4 (QVGA) G.711 + G.726 Encoder (c) 2004-2006
MPEG4 (VGA) G.711 + G.726 Encoder (c) 2004-2006
Ingenient Technologies - DM320 MPEG4 Encoder + G.711 + G.726 Encoder/Decoder (c) 2004-2006
Ingenient Technologies - DM320 MPEG4 + G.711 + G.726 Decoder (c) 2004-2006
starting pid 1020, tty '': '/sbin/getty'
neuros login: