rendered paste body Copyright (c) 1992-2008 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-STABLE #0: Mon Mar 10 10:26:30 CET 2008
root@cad.lecad.uni-lj.si:/usr/src/sys/i386/compile/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0d88000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0d881f8.
Calibrating clock(s) ... i8254 clock: 1193214 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 2660009400 Hz
CPU: Intel(R) Xeon(R) CPU 3070 @ 2.66GHz (2660.01-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x6f6 Stepping = 6
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0xe3bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM>
AMD Features=0x20100000<NX,LM>
AMD Features2=0x1<LAHF>
Cores per package: 2
Instruction TLB: 4 KB Pages, 4-way set associative, 128 entries
1st-level instruction cache: 32 KB, 8-way set associative, 64 byte line size
1st-level data cache: 32 KB, 8-way set associative, 64 byte line size
L2 cache: 4096 kbytes, 16-way associative, 64 bytes/line
real memory = 3488022528 (3326 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009cfff, 638976 bytes (156 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000001028000 - 0x00000000cc39cfff, 3409399808 bytes (832373 pages)
avail memory = 3408842752 (3250 MB)
Table '_MAR' at 0xcfe82da8
Table 'FACP' at 0xcfe82dd8
Table 'MCFG' at 0xcfe82ecc
Table 'APIC' at 0xcfe82f08
MADT: Found table at 0xcfe82f08
MP Configuration Table version 1.4 found at 0xc009dc71
APIC: Using the MADT enumerator.
MADT: Found CPU APIC ID 0 ACPI ID 0: enabled
SMP: Added CPU 0 (AP)
MADT: Found CPU APIC ID 1 ACPI ID 1: enabled
SMP: Added CPU 1 (AP)
ACPI APIC Table: <PTLTD APIC >
INTR: Adding local APIC 1 as a target
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
bios32: Found BIOS32 Service Directory header at 0xc00f6a80
bios32: Entry = 0xfdb40 (c00fdb40) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xfdb40+0x23f
pnpbios: Found PnP BIOS data at 0xc00f6b20
pnpbios: Entry = f0000:b84e Rev = 1.0
Other BIOS signatures found:
APIC: CPU 0 has ACPI ID 0
APIC: CPU 1 has ACPI ID 1
ACPI: RSDP @ 0x0xf6ad0/0x0024 (v 2 PTLTD )
ACPI: XSDT @ 0x0xcfe798a8/0x005C (v 1 PTLTD XSDT 0x06040000 LTP 0x00000000)
ACPI: _MAR @ 0x0xcfe82da8/0x0030 (v 1 Intel OEMDMAR 0x06040000 LOHR 0x00000001)
ACPI: FACP @ 0x0xcfe82dd8/0x00F4 (v 3 INTEL 0x06040000 PTL 0x00000002)
ACPI: DSDT @ 0x0xcfe7c8e4/0x6450 (v 1 INTEL BEARLAKE 0x06040000 MSFT 0x02000001)
ACPI: FACS @ 0x0xcfe85fc0/0x0040
ACPI: MCFG @ 0x0xcfe82ecc/0x003C (v 1 PTLTD MCFG 0x06040000 LTP 0x00000000)
ACPI: APIC @ 0x0xcfe82f08/0x0080 (v 1 PTLTD APIC 0x06040000 LTP 0x00000000)
ACPI: BOOT @ 0x0xcfe82f88/0x0028 (v 1 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001)
ACPI: SPCR @ 0x0xcfe82fb0/0x0050 (v 1 PTLTD $UCRTBL$ 0x06040000 PTL 0x00000001)
ACPI: SSDT @ 0x0xcfe79904/0x1405 (v 1 PmRef CpuPm 0x00003000 INTL 0x20050228)
MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000
ioapic0: Routing external 8259A's -> intpin 0
MADT: Found IO APIC ID 3, Interrupt 24 at 0xfecc0000
MADT: Found IO APIC ID 4, Interrupt 48 at 0xfecc0400
lapic0: Routing NMI -> LINT1
lapic0: LINT1 trigger: edge
lapic0: LINT1 polarity: high
lapic1: Routing NMI -> LINT1
lapic1: LINT1 trigger: edge
lapic1: LINT1 polarity: high
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
ioapic2 <Version 2.0> irqs 48-71 on motherboard
cpu0 BSP:
ID: 0x00000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00000200 err: 0x00010000 pcm: 0x00010000
wlan: <802.11 Link Layer>
ath_rate: version 1.2 <SampleRate bit-rate selection algorithm>
wlan_amrr: <AMRR Transmit Rate Control Algorithm>
random: <entropy source, Software, Yarrow>
nfslock: pseudo-device
kbd: new array size 4
kbd1 at kbdmux0
io: <I/O>
mem: <memory>
Pentium Pro MTRR support enabled
null: <null device, zero device>
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
hptrr: HPT RocketRAID controller driver v1.1 (Mar 10 2008 10:26:19)
npx0: INT 16 interface
acpi0: <PTLTD XSDT> on motherboard
ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48
acpi0: [MPSAFE]
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: wakeup code va 0xda71d000 pa 0x1000
pci_open(1): mode 1 addr port (0x0cf8) is 0x80021800
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=29f08086)
pcibios: BIOS version 3.00
AcpiOsDerivePciId: \_SB_.PCI0.REGS -> bus 0 dev 0 func 0
AcpiOsDerivePciId: \_SB_.PCI0.IGD0.IGDP -> bus 0 dev 2 func 0
AcpiOsDerivePciId: \_SB_.PCI0.LPC0.REGS -> bus 0 dev 31 func 0
AcpiOsDerivePciId: \_SB_.PCI0.LPC0.PIRX -> bus 0 dev 31 func 0
AcpiOsDerivePciId: \_SB_.PCI0.LPC0.PIRY -> bus 0 dev 31 func 0
ACPI Error (psargs-0459): [\_SB_.PCI0.PSKB] Namespace lookup failure, AE_NOT_FOUND
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.PCI0.LPC0.SIO_.KBC0._STA] (Node 0xc68acc20), AE_NOT_FOUND
ACPI Error (psargs-0459): [\_SB_.PCI0.PSKB] Namespace lookup failure, AE_NOT_FOUND
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.PCI0.LPC0.SIO_.KBC0._STA] (Node 0xc68acc20), AE_NOT_FOUND
ACPI Error (psargs-0459): [\_SB_.PCI0.PSKB] Namespace lookup failure, AE_NOT_FOUND
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.PCI0.LPC0.SIO_.KBC0._STA] (Node 0xc68acc20), AE_NOT_FOUND
ACPI Error (psargs-0459): [\_SB_.PCI0.PSKB] Namespace lookup failure, AE_NOT_FOUND
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.PCI0.LPC0.SIO_.KBC0._STA] (Node 0xc68acc20), AE_NOT_FOUND
ACPI Error (psargs-0459): [\_SB_.PCI0.PSKB] Namespace lookup failure, AE_NOT_FOUND
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.PCI0.LPC0.SIO_.KBC0._STA] (Node 0xc68acc20), AE_NOT_FOUND
ACPI Error (psargs-0459): [\_SB_.PCI0.PSMS] Namespace lookup failure, AE_NOT_FOUND
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.PCI0.LPC0.SIO_.MSE0._STA] (Node 0xc68acb40), AE_NOT_FOUND
ACPI Error (psargs-0459): [\_SB_.PCI0.PSMS] Namespace lookup failure, AE_NOT_FOUND
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.PCI0.LPC0.SIO_.MSE0._STA] (Node 0xc68acb40), AE_NOT_FOUND
ACPI Error (psargs-0459): [\_SB_.PCI0.PSMS] Namespace lookup failure, AE_NOT_FOUND
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.PCI0.LPC0.SIO_.MSE0._STA] (Node 0xc68acb40), AE_NOT_FOUND
ACPI Error (psargs-0459): [\_SB_.PCI0.PSMS] Namespace lookup failure, AE_NOT_FOUND
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.PCI0.LPC0.SIO_.MSE0._STA] (Node 0xc68acb40), AE_NOT_FOUND
ACPI Error (psargs-0459): [\_SB_.PCI0.PSMS] Namespace lookup failure, AE_NOT_FOUND
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.PCI0.LPC0.SIO_.MSE0._STA] (Node 0xc68acb40), AE_NOT_FOUND
ACPI Error (psargs-0459): [\_SB_.PCI0.PSKB] Namespace lookup failure, AE_NOT_FOUND
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.PCI0.LPC0.SIO_.KBC0._STA] (Node 0xc68acc20), AE_NOT_FOUND
ACPI Error (psargs-0459): [\_SB_.PCI0.PSKB] Namespace lookup failure, AE_NOT_FOUND
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.PCI0.LPC0.SIO_.KBC0._STA] (Node 0xc68acc20), AE_NOT_FOUND
ACPI Error (psargs-0459): [\_SB_.PCI0.PSMS] Namespace lookup failure, AE_NOT_FOUND
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.PCI0.LPC0.SIO_.MSE0._STA] (Node 0xc68acb40), AE_NOT_FOUND
ACPI Error (psargs-0459): [\_SB_.PCI0.PSMS] Namespace lookup failure, AE_NOT_FOUND
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.PCI0.LPC0.SIO_.MSE0._STA] (Node 0xc68acb40), AE_NOT_FOUND
ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
pci_link0: Index IRQ Rtd Ref IRQs
Initial Probe 0 5 N 0 3 4 5 6 7 10 11 12 14 15
Validation 0 5 N 0 3 4 5 6 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link1: Index IRQ Rtd Ref IRQs
Initial Probe 0 10 N 0 3 4 5 6 7 10 11 12 14 15
Validation 0 10 N 0 3 4 5 6 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link2: Index IRQ Rtd Ref IRQs
Initial Probe 0 11 N 0 3 4 5 6 7 10 11 12 14 15
Validation 0 11 N 0 3 4 5 6 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link3: Index IRQ Rtd Ref IRQs
Initial Probe 0 12 N 0 3 4 5 6 7 10 11 12 14 15
Validation 0 12 N 0 3 4 5 6 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link4: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 6 7 10 11 12 14 15
Validation 0 255 N 0 3 4 5 6 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link5: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 6 7 10 11 12 14 15
Validation 0 255 N 0 3 4 5 6 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link6: Index IRQ Rtd Ref IRQs
Initial Probe 0 10 N 0 3 4 5 6 7 10 11 12 14 15
Validation 0 10 N 0 3 4 5 6 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link7: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 6 7 10 11 12 14 15
Validation 0 255 N 0 3 4 5 6 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15
cpu0: <ACPI CPU> on acpi0
ACPI: SSDT @ 0x0xcfe7ad09/0x021F (v 1 PmRef Cpu0Ist 0x00003000 INTL 0x20050228)
cpu0: switching to generic Cx mode
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
ACPI: SSDT @ 0x0xcfe7af28/0x01B0 (v 1 PmRef Cpu1Ist 0x00003000 INTL 0x20050228)
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: domain=0, physical bus=0
found-> vendor=0x8086, dev=0x29f0, revid=0x01
domain=0, bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x29f1, revid=0x01
domain=0, bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=5
powerspec 3 supports D0 D3 current D0
MSI supports 1 message
pcib0: matched entry for 0.1.INTA
pcib0: slot 1 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x2937, revid=0x02
domain=0, bus=0, slot=26, func=0
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=5
map[20]: type I/O Port, range 32, base 0x1820, size 5, enabled
pcib0: matched entry for 0.26.INTA
pcib0: slot 26 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x2938, revid=0x02
domain=0, bus=0, slot=26, func=1
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=10
map[20]: type I/O Port, range 32, base 0x1840, size 5, enabled
pcib0: matched entry for 0.26.INTB
pcib0: slot 26 INTB hardwired to IRQ 17
found-> vendor=0x8086, dev=0x2939, revid=0x02
domain=0, bus=0, slot=26, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=11
map[20]: type I/O Port, range 32, base 0x1860, size 5, enabled
pcib0: matched entry for 0.26.INTC
pcib0: slot 26 INTC hardwired to IRQ 18
found-> vendor=0x8086, dev=0x293c, revid=0x02
domain=0, bus=0, slot=26, func=7
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=11
powerspec 2 supports D0 D3 current D0
map[10]: type Memory, range 32, base 0xd8901000, size 10, enabled
pcib0: matched entry for 0.26.INTC
pcib0: slot 26 INTC hardwired to IRQ 18
found-> vendor=0x8086, dev=0x2940, revid=0x02
domain=0, bus=0, slot=28, func=0
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=5
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
pcib0: matched entry for 0.28.INTA
pcib0: slot 28 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x2948, revid=0x02
domain=0, bus=0, slot=28, func=4
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=5
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
pcib0: matched entry for 0.28.INTA
pcib0: slot 28 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x294a, revid=0x02
domain=0, bus=0, slot=28, func=5
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
intpin=b, irq=10
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
pcib0: matched entry for 0.28.INTB
pcib0: slot 28 INTB hardwired to IRQ 17
found-> vendor=0x8086, dev=0x2934, revid=0x02
domain=0, bus=0, slot=29, func=0
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=5
map[20]: type I/O Port, range 32, base 0x1880, size 5, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x2935, revid=0x02
domain=0, bus=0, slot=29, func=1
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=10
map[20]: type I/O Port, range 32, base 0x18a0, size 5, enabled
pcib0: matched entry for 0.29.INTB
pcib0: slot 29 INTB hardwired to IRQ 17
found-> vendor=0x8086, dev=0x2936, revid=0x02
domain=0, bus=0, slot=29, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=11
map[20]: type I/O Port, range 32, base 0x18c0, size 5, enabled
pcib0: matched entry for 0.29.INTC
pcib0: slot 29 INTC hardwired to IRQ 18
found-> vendor=0x8086, dev=0x293a, revid=0x02
domain=0, bus=0, slot=29, func=7
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=5
powerspec 2 supports D0 D3 current D0
map[10]: type Memory, range 32, base 0xd8901400, size 10, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x244e, revid=0x92
domain=0, bus=0, slot=30, func=0
class=06-04-01, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x2916, revid=0x02
domain=0, bus=0, slot=31, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x2920, revid=0x02
domain=0, bus=0, slot=31, func=2
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=255
powerspec 3 supports D0 D3 current D0
map[20]: type I/O Port, range 32, base 0x1c10, size 4, enabled
map[24]: type I/O Port, range 32, base 0x1c00, size 4, enabled
found-> vendor=0x8086, dev=0x2930, revid=0x02
domain=0, bus=0, slot=31, func=3
class=0c-05-00, hdrtype=0x00, mfdev=0
cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=10
map[10]: type Memory, range 64, base 0xd8901800, size 8, memory disabled
map[20]: type I/O Port, range 32, base 0x1100, size 5, enabled
pcib0: matched entry for 0.31.INTB
pcib0: slot 31 INTB hardwired to IRQ 17
found-> vendor=0x8086, dev=0x2926, revid=0x02
domain=0, bus=0, slot=31, func=5
class=01-01-85, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=11
powerspec 3 supports D0 D3 current D0
map[10]: type I/O Port, range 32, base 0x1c68, size 3, enabled
map[14]: type I/O Port, range 32, base 0x1c5c, size 2, enabled
map[18]: type I/O Port, range 32, base 0x1c60, size 3, enabled
map[1c]: type I/O Port, range 32, base 0x1c58, size 2, enabled
map[20]: type I/O Port, range 32, base 0x1c30, size 4, enabled
map[24]: type I/O Port, range 32, base 0x1c20, size 4, enabled
pcib0: matched entry for 0.31.INTC
pcib0: slot 31 INTC hardwired to IRQ 18
found-> vendor=0x8086, dev=0x2932, revid=0x02
domain=0, bus=0, slot=31, func=6
class=11-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0002, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=5
powerspec 3 supports D0 D3 current D0
map[10]: type Memory, range 64, base 0xd8900000, size 12, enabled
pcib0: matched entry for 0.31.INTA
pcib0: slot 31 INTA hardwired to IRQ 16
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pcib1: domain 0
pcib1: secondary bus 1
pcib1: subordinate bus 3
pcib1: I/O decode 0x2000-0x3fff
pcib1: memory decode 0xd8000000-0xd82fffff
pcib1: no prefetched decode
pcib1: could not get PCI interrupt routing table for \_SB_.PCI0.PEG_ - AE_NOT_FOUND
pci1: <ACPI PCI bus> on pcib1
pci1: domain=0, physical bus=1
found-> vendor=0x8086, dev=0x0329, revid=0x09
domain=0, bus=1, slot=0, func=0
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
found-> vendor=0x8086, dev=0x0326, revid=0x09
domain=0, bus=1, slot=0, func=1
class=08-00-20, hdrtype=0x00, mfdev=1
cmdreg=0x0006, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
map[10]: type Memory, range 32, base 0xd8200000, size 12, enabled
pcib1: requested memory range 0xd8200000-0xd8200fff: good
found-> vendor=0x8086, dev=0x032a, revid=0x09
domain=0, bus=1, slot=0, func=2
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
found-> vendor=0x8086, dev=0x0327, revid=0x09
domain=0, bus=1, slot=0, func=3
class=08-00-20, hdrtype=0x00, mfdev=1
cmdreg=0x0006, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
map[10]: type Memory, range 32, base 0xd8201000, size 12, enabled
pcib1: requested memory range 0xd8201000-0xd8201fff: good
pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci1
pcib2: domain 0
pcib2: secondary bus 2
pcib2: subordinate bus 2
pcib2: I/O decode 0x2000-0x2fff
pcib2: memory decode 0xd8100000-0xd81fffff
pcib2: no prefetched decode
pci2: <ACPI PCI bus> on pcib2
pci2: domain=0, physical bus=2
found-> vendor=0x10b7, dev=0x9200, revid=0x78
domain=0, bus=2, slot=2, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0017, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x50 (2400 ns), mingnt=0x0a (2500 ns), maxlat=0x0a (2500 ns)
intpin=a, irq=5
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type I/O Port, range 32, base 0x2800, size 7, enabled
pcib2: requested I/O range 0x2800-0x287f: in range
pcib1: requested I/O range 0x2800-0x287f: in range
map[14]: type Memory, range 32, base 0xd8100000, size 7, enabled
pcib2: requested memory range 0xd8100000-0xd810007f: good
pcib1: requested memory range 0xd8100000-0xd810007f: good
pcib2: matched entry for 2.2.INTA
pcib2: slot 2 INTA hardwired to IRQ 28
found-> vendor=0x9005, dev=0x800f, revid=0x10
domain=0, bus=2, slot=3, func=0
class=01-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0017, statreg=0x0430, cachelnsz=8 (dwords)
lattimer=0x48 (2160 ns), mingnt=0x28 (10000 ns), maxlat=0x19 (6250 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
MSI supports 2 messages, 64 bit
map[10]: type I/O Port, range 32, base 0x2400, size 8, enabled
pcib2: requested I/O range 0x2400-0x24ff: in range
pcib1: requested I/O range 0x2400-0x24ff: in range
map[14]: type Memory, range 64, base 0xd8102000, size 13, enabled
pcib2: requested memory range 0xd8102000-0xd8103fff: good
pcib1: requested memory range 0xd8102000-0xd8103fff: good
map[1c]: type I/O Port, range 32, base 0x2000, size 8, enabled
pcib2: requested I/O range 0x2000-0x20ff: in range
pcib1: requested I/O range 0x2000-0x20ff: in range
pcib2: matched entry for 2.3.INTA
pcib2: slot 3 INTA hardwired to IRQ 26
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0x2800-0x287f mem 0xd8100000-0xd810007f irq 28 at device 2.0 on pci2
xl0: Reserved 0x80 bytes for rid 0x14 type 3 at 0xd8100000
xl0: using memory mapped I/O
xl0: media options word: a
xl0: found MII/AUTO
miibus0: <MII bus> on xl0
ukphy0: <Generic IEEE 802.3u media interface> PHY 24 on miibus0
ukphy0: OUI 0x00105a, model 0x0000, rev. 0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl0: bpf attached
xl0: Ethernet address: 00:01:02:99:b4:96
ioapic1: routing intpin 4 (PCI IRQ 28) to vector 49
xl0: [MPSAFE]
xl0: [ITHREAD]
ahd0: <Adaptec AIC7901 Ultra320 SCSI adapter> port 0x2400-0x24ff,0x2000-0x20ff mem 0xd8102000-0xd8103fff irq 26 at device 3.0 on pci2
ahd0: Defaulting to MEMIO on
ahd0: Reserved 0x2000 bytes for rid 0x14 type 3 at 0xd8102000
ahd0: Reading VPD from SEEPROM...ahd0: VPD parsing successful
ahd0: Reading SEEPROM...done.
ahd0: STPWLEVEL is on
ahd0: Manual Primary Termination
ahd0: Manual Secondary Termination
ahd0: Primary High byte termination Enabled
ahd0: Primary Low byte termination Enabled
ahd0: Secondary High byte termination Disabled
ahd0: Secondary Low byte termination Disabled
ahd0: Downloading Sequencer Program... 682 instructions downloaded
ahd0: Features 0x3c001, Bugs 0x500000, Flags 0x43f1
ioapic1: routing intpin 2 (PCI IRQ 26) to vector 50
ahd0: [MPSAFE]
ahd0: [ITHREAD]
aic7901: Ultra320 Wide Channel A, SCSI Id=7, PCI 33 or 66Mhz, 512 SCBs
pcib3: <ACPI PCI-PCI bridge> at device 0.2 on pci1
pcib3: domain 0
pcib3: secondary bus 3
pcib3: subordinate bus 3
pcib3: I/O decode 0x3000-0x3fff
pcib3: memory decode 0xd8000000-0xd80fffff
pcib3: no prefetched decode
pci3: <ACPI PCI bus> on pcib3
pci3: domain=0, physical bus=3
found-> vendor=0x8086, dev=0x1079, revid=0x03
domain=0, bus=3, slot=1, func=0
class=02-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0017, statreg=0x0230, cachelnsz=8 (dwords)
lattimer=0x34 (1560 ns), mingnt=0xff (63750 ns), maxlat=0x00 (0 ns)
intpin=a, irq=5
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type Memory, range 64, base 0xd8080000, size 17, enabled
pcib3: requested memory range 0xd8080000-0xd809ffff: good
pcib1: requested memory range 0xd8080000-0xd809ffff: good
map[18]: type Memory, range 64, base 0xd8000000, size 18, enabled
pcib3: requested memory range 0xd8000000-0xd803ffff: good
pcib1: requested memory range 0xd8000000-0xd803ffff: good
map[20]: type I/O Port, range 32, base 0x3000, size 6, enabled
pcib3: requested I/O range 0x3000-0x303f: in range
pcib1: requested I/O range 0x3000-0x303f: in range
pcib3: matched entry for 3.1.INTA
pcib3: slot 1 INTA hardwired to IRQ 48
found-> vendor=0x8086, dev=0x1079, revid=0x03
domain=0, bus=3, slot=1, func=1
class=02-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0017, statreg=0x0230, cachelnsz=8 (dwords)
lattimer=0x34 (1560 ns), mingnt=0xff (63750 ns), maxlat=0x00 (0 ns)
intpin=b, irq=10
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type Memory, range 64, base 0xd80a0000, size 17, enabled
pcib3: requested memory range 0xd80a0000-0xd80bffff: good
pcib1: requested memory range 0xd80a0000-0xd80bffff: good
map[18]: type Memory, range 64, base 0xd8040000, size 18, enabled
pcib3: requested memory range 0xd8040000-0xd807ffff: good
pcib1: requested memory range 0xd8040000-0xd807ffff: good
map[20]: type I/O Port, range 32, base 0x3040, size 6, enabled
pcib3: requested I/O range 0x3040-0x307f: in range
pcib1: requested I/O range 0x3040-0x307f: in range
pcib3: matched entry for 3.1.INTB
pcib3: slot 1 INTB hardwired to IRQ 49
em0: <Intel(R) PRO/1000 Network Connection Version - 6.7.3> port 0x3000-0x303f mem 0xd8080000-0xd809ffff,0xd8000000-0xd803ffff irq 48 at device 1.0 on pci3
em0: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xd8080000
em0: Reserved 0x40 bytes for rid 0x20 type 4 at 0x3000
em0: bpf attached
em0: Ethernet address: 00:04:23:df:69:ae
ioapic2: routing intpin 0 (PCI IRQ 48) to vector 51
em0: [FILTER]
em1: <Intel(R) PRO/1000 Network Connection Version - 6.7.3> port 0x3040-0x307f mem 0xd80a0000-0xd80bffff,0xd8040000-0xd807ffff irq 49 at device 1.1 on pci3
em1: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xd80a0000
em1: Reserved 0x40 bytes for rid 0x20 type 4 at 0x3040
em1: bpf attached
em1: Ethernet address: 00:04:23:df:69:af
ioapic2: routing intpin 1 (PCI IRQ 49) to vector 52
em1: [FILTER]
uhci0: <UHCI (generic) USB controller> port 0x1820-0x183f irq 16 at device 26.0 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1820
ioapic0: routing intpin 16 (PCI IRQ 16) to vector 53
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0x1840-0x185f irq 17 at device 26.1 on pci0
uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1840
ioapic0: routing intpin 17 (PCI IRQ 17) to vector 54
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
uhci2: <UHCI (generic) USB controller> port 0x1860-0x187f irq 18 at device 26.2 on pci0
uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1860
ioapic0: routing intpin 18 (PCI IRQ 18) to vector 55
uhci2: [GIANT-LOCKED]
uhci2: [ITHREAD]
usb2: <UHCI (generic) USB controller> on uhci2
usb2: USB revision 1.0
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xd8901000-0xd89013ff irq 18 at device 26.7 on pci0
ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xd8901000
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb3: EHCI version 1.0
usb3: companion controllers, 2 ports each: usb0 usb1 usb2
usb3: <EHCI (generic) USB 2.0 controller> on ehci0
usb3: USB revision 2.0
uhub3: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb3
uhub3: 6 ports with 6 removable, self powered
pcib4: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pcib4: domain 0
pcib4: secondary bus 5
pcib4: subordinate bus 5
pcib4: I/O decode 0x4000-0x4fff
pcib4: memory decode 0xd8300000-0xd83fffff
pcib4: no prefetched decode
pci5: <ACPI PCI bus> on pcib4
pci5: domain=0, physical bus=5
found-> vendor=0x8086, dev=0x10b9, revid=0x06
domain=0, bus=5, slot=0, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=12
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type Memory, range 32, base 0xd8320000, size 17, enabled
pcib4: requested memory range 0xd8320000-0xd833ffff: good
map[14]: type Memory, range 32, base 0xd8300000, size 17, enabled
pcib4: requested memory range 0xd8300000-0xd831ffff: good
map[18]: type I/O Port, range 32, base 0x4000, size 5, enabled
pcib4: requested I/O range 0x4000-0x401f: in range
pcib4: matched entry for 5.0.INTA
pcib4: slot 0 INTA hardwired to IRQ 16
em2: <Intel(R) PRO/1000 Network Connection Version - 6.7.3> port 0x4000-0x401f mem 0xd8320000-0xd833ffff,0xd8300000-0xd831ffff irq 16 at device 0.0 on pci5
em2: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xd8320000
em2: attempting to allocate 1 MSI vectors (1 supported)
msi: routing MSI IRQ 256 to vector 56
em2: using IRQ 256 for MSI
em2: Using MSI interrupt
em2: bpf attached
em2: Ethernet address: 00:15:17:0b:e9:22
em2: [FILTER]
pcib5: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
pcib5: domain 0
pcib5: secondary bus 13
pcib5: subordinate bus 13
pcib5: I/O decode 0x5000-0x5fff
pcib5: memory decode 0xd8400000-0xd84fffff
pcib5: no prefetched decode
pci13: <ACPI PCI bus> on pcib5
pci13: domain=0, physical bus=13
found-> vendor=0x8086, dev=0x108c, revid=0x03
domain=0, bus=13, slot=0, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=5
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type Memory, range 32, base 0xd8400000, size 17, enabled
pcib5: requested memory range 0xd8400000-0xd841ffff: good
map[18]: type I/O Port, range 32, base 0x5000, size 5, enabled
pcib5: requested I/O range 0x5000-0x501f: in range
pcib5: matched entry for 13.0.INTA
pcib5: slot 0 INTA hardwired to IRQ 16
em3: <Intel(R) PRO/1000 Network Connection Version - 6.7.3> port 0x5000-0x501f mem 0xd8400000-0xd841ffff irq 16 at device 0.0 on pci13
em3: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xd8400000
em3: attempting to allocate 1 MSI vectors (1 supported)
msi: routing MSI IRQ 257 to vector 57
em3: using IRQ 257 for MSI
em3: Using MSI interrupt
em3: bpf attached
em3: Ethernet address: 00:30:48:62:e3:00
em3: [FILTER]
pcib6: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0
pcib6: domain 0
pcib6: secondary bus 15
pcib6: subordinate bus 15
pcib6: I/O decode 0x6000-0x6fff
pcib6: memory decode 0xd8500000-0xd85fffff
pcib6: no prefetched decode
pci15: <ACPI PCI bus> on pcib6
pci15: domain=0, physical bus=15
found-> vendor=0x8086, dev=0x109a, revid=0x00
domain=0, bus=15, slot=0, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type Memory, range 32, base 0xd8500000, size 17, enabled
pcib6: requested memory range 0xd8500000-0xd851ffff: good
map[18]: type I/O Port, range 32, base 0x6000, size 5, enabled
pcib6: requested I/O range 0x6000-0x601f: in range
pcib6: matched entry for 15.0.INTA
pcib6: slot 0 INTA hardwired to IRQ 17
em4: <Intel(R) PRO/1000 Network Connection Version - 6.7.3> port 0x6000-0x601f mem 0xd8500000-0xd851ffff irq 17 at device 0.0 on pci15
em4: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xd8500000
em4: attempting to allocate 1 MSI vectors (1 supported)
msi: routing MSI IRQ 258 to vector 58
em4: using IRQ 258 for MSI
em4: Using MSI interrupt
em4: bpf attached
em4: Ethernet address: 00:30:48:62:e3:01
em4: [FILTER]
uhci3: <UHCI (generic) USB controller> port 0x1880-0x189f irq 16 at device 29.0 on pci0
uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1880
uhci3: [GIANT-LOCKED]
uhci3: [ITHREAD]
usb4: <UHCI (generic) USB controller> on uhci3
usb4: USB revision 1.0
uhub4: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4
uhub4: 2 ports with 2 removable, self powered
uhci4: <UHCI (generic) USB controller> port 0x18a0-0x18bf irq 17 at device 29.1 on pci0
uhci4: Reserved 0x20 bytes for rid 0x20 type 4 at 0x18a0
uhci4: [GIANT-LOCKED]
uhci4: [ITHREAD]
usb5: <UHCI (generic) USB controller> on uhci4
usb5: USB revision 1.0
uhub5: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb5
uhub5: 2 ports with 2 removable, self powered
uhci5: <UHCI (generic) USB controller> port 0x18c0-0x18df irq 18 at device 29.2 on pci0
uhci5: Reserved 0x20 bytes for rid 0x20 type 4 at 0x18c0
uhci5: [GIANT-LOCKED]
uhci5: [ITHREAD]
usb6: <UHCI (generic) USB controller> on uhci5
usb6: USB revision 1.0
uhub6: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb6
uhub6: 2 ports with 2 removable, self powered
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xd8901400-0xd89017ff irq 16 at device 29.7 on pci0
ehci1: Reserved 0x400 bytes for rid 0x10 type 3 at 0xd8901400
ehci1: [GIANT-LOCKED]
ehci1: [ITHREAD]
usb7: EHCI version 1.0
usb7: companion controllers, 2 ports each: usb4 usb5 usb6
usb7: <EHCI (generic) USB 2.0 controller> on ehci1
usb7: USB revision 2.0
uhub7: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb7
uhub7: 6 ports with 6 removable, self powered
pcib7: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib7: domain 0
pcib7: secondary bus 17
pcib7: subordinate bus 17
pcib7: I/O decode 0x7000-0x7fff
pcib7: memory decode 0xd8600000-0xd86fffff
pcib7: prefetched decode 0xd0000000-0xd7ffffff
pcib7: Subtractively decoded bridge.
pci17: <ACPI PCI bus> on pcib7
pci17: domain=0, physical bus=17
found-> vendor=0x1002, dev=0x515e, revid=0x02
domain=0, bus=17, slot=4, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0287, statreg=0x0290, cachelnsz=8 (dwords)
lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type Prefetchable Memory, range 32, base 0xd0000000, size 27, enabled
pcib7: requested memory range 0xd0000000-0xd7ffffff: good
map[14]: type I/O Port, range 32, base 0x7000, size 8, enabled
pcib7: requested I/O range 0x7000-0x70ff: in range
map[18]: type Memory, range 32, base 0xd8600000, size 16, enabled
pcib7: requested memory range 0xd8600000-0xd860ffff: good
pcib7: matched entry for 17.4.INTA
pcib7: slot 4 INTA hardwired to IRQ 22
vgapci0: <VGA-compatible display> port 0x7000-0x70ff mem 0xd0000000-0xd7ffffff,0xd8600000-0xd860ffff irq 22 at device 4.0 on pci17
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH9 SATA300 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1c10-0x1c1f,0x1c00-0x1c0f at device 31.2 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x1c10
atapci0: Reserved 0x10 bytes for rid 0x24 type 4 at 0x1c00
ata0: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=7f ostat1=7f
ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata0: stat1=0x7f err=0xff lsb=0xff msb=0xff
ata0: reset tp2 stat0=ff stat1=ff devices=0x0
ioapic0: routing intpin 14 (ISA IRQ 14) to vector 59
ata0: [MPSAFE]
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=7f ostat1=7f
ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata1: stat1=0x7f err=0xff lsb=0xff msb=0xff
ata1: reset tp2 stat0=ff stat1=ff devices=0x0
ioapic0: routing intpin 15 (ISA IRQ 15) to vector 60
ata1: [MPSAFE]
ata1: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
atapci1: <Intel ICH9 SATA300 controller> port 0x1c68-0x1c6f,0x1c5c-0x1c5f,0x1c60-0x1c67,0x1c58-0x1c5b,0x1c30-0x1c3f,0x1c20-0x1c2f irq 18 at device 31.5 on pci0
atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0x1c30
atapci1: [MPSAFE]
atapci1: [ITHREAD]
atapci1: Reserved 0x10 bytes for rid 0x24 type 4 at 0x1c20
ata2: <ATA channel 0> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1c68
atapci1: Reserved 0x4 bytes for rid 0x14 type 4 at 0x1c5c
ata2: reset tp1 mask=03 ostat0=7f ostat1=7f
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat1=0x7f err=0xff lsb=0xff msb=0xff
ata2: reset tp2 stat0=ff stat1=ff devices=0x0
ata2: [MPSAFE]
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0x1c60
atapci1: Reserved 0x4 bytes for rid 0x1c type 4 at 0x1c58
ata3: reset tp1 mask=03 ostat0=7f ostat1=7f
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat1=0x7f err=0xff lsb=0xff msb=0xff
ata3: reset tp2 stat0=ff stat1=ff devices=0x0
ata3: [MPSAFE]
ata3: [ITHREAD]
pci0: <dasp> at device 31.6 (no driver attached)
acpi_button0: <Power Button> on acpi0
ACPI Error (psargs-0459): [\_SB_.PCI0.PSKB] Namespace lookup failure, AE_NOT_FOUND
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.PCI0.LPC0.SIO_.KBC0._STA] (Node 0xc68acc20), AE_NOT_FOUND
ACPI Error (psargs-0459): [\_SB_.PCI0.PSKB] Namespace lookup failure, AE_NOT_FOUND
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.PCI0.LPC0.SIO_.KBC0._STA] (Node 0xc68acc20), AE_NOT_FOUND
ACPI Error (psargs-0459): [\_SB_.PCI0.PSKB] Namespace lookup failure, AE_NOT_FOUND
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.PCI0.LPC0.SIO_.KBC0._STA] (Node 0xc68acc20), AE_NOT_FOUND
ACPI Error (psargs-0459): [\_SB_.PCI0.PSKB] Namespace lookup failure, AE_NOT_FOUND
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.PCI0.LPC0.SIO_.KBC0._STA] (Node 0xc68acc20), AE_NOT_FOUND
ACPI Error (psargs-0459): [\_SB_.PCI0.PSKB] Namespace lookup failure, AE_NOT_FOUND
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.PCI0.LPC0.SIO_.KBC0._STA] (Node 0xc68acc20), AE_NOT_FOUND
ACPI Error (psargs-0459): [\_SB_.PCI0.PSKB] Namespace lookup failure, AE_NOT_FOUND
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.PCI0.LPC0.SIO_.KBC0._STA] (Node 0xc68acc20), AE_NOT_FOUND
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0067
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
ioapic0: routing intpin 1 (ISA IRQ 1) to vector 61
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: unable to allocate IRQ
ACPI Error (psargs-0459): [\_SB_.PCI0.PSKB] Namespace lookup failure, AE_NOT_FOUND
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.PCI0.LPC0.SIO_.KBC0._STA] (Node 0xc68acc20), AE_NOT_FOUND
ACPI Error (psargs-0459): [\_SB_.PCI0.PSKB] Namespace lookup failure, AE_NOT_FOUND
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.PCI0.LPC0.SIO_.KBC0._STA] (Node 0xc68acc20), AE_NOT_FOUND
ACPI Error (psargs-0459): [\_SB_.PCI0.PSMS] Namespace lookup failure, AE_NOT_FOUND
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.PCI0.LPC0.SIO_.MSE0._STA] (Node 0xc68acb40), AE_NOT_FOUND
ACPI Error (psargs-0459): [\_SB_.PCI0.PSMS] Namespace lookup failure, AE_NOT_FOUND
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.PCI0.LPC0.SIO_.MSE0._STA] (Node 0xc68acb40), AE_NOT_FOUND
ACPI Error (psargs-0459): [\_SB_.PCI0.PSMS] Namespace lookup failure, AE_NOT_FOUND
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.PCI0.LPC0.SIO_.MSE0._STA] (Node 0xc68acb40), AE_NOT_FOUND
ACPI Error (psargs-0459): [\_SB_.PCI0.PSMS] Namespace lookup failure, AE_NOT_FOUND
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.PCI0.LPC0.SIO_.MSE0._STA] (Node 0xc68acb40), AE_NOT_FOUND
psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
psm0: current command byte:0067
psm0: failed to reset the aux device.
ACPI Error (psargs-0459): [\_SB_.PCI0.PSMS] Namespace lookup failure, AE_NOT_FOUND
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.PCI0.LPC0.SIO_.MSE0._STA] (Node 0xc68acb40), AE_NOT_FOUND
ACPI Error (psargs-0459): [\_SB_.PCI0.PSMS] Namespace lookup failure, AE_NOT_FOUND
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.PCI0.LPC0.SIO_.MSE0._STA] (Node 0xc68acb40), AE_NOT_FOUND
sio0: irq maps: 0x1c21 0x1c31 0x1c21 0x1c21
sio0: irq maps: 0x1c21 0x1c31 0x1c21 0x1c21
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
ioapic0: routing intpin 4 (ISA IRQ 4) to vector 62
sio0: [FILTER]
sio1: irq maps: 0x1c21 0x1c29 0x1c21 0x1c21
sio1: irq maps: 0x1c21 0x1c29 0x1c21 0x1c21
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ioapic0: routing intpin 3 (ISA IRQ 3) to vector 63
sio1: [FILTER]
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: ic_type 90 part_id 80
ioapic0: routing intpin 6 (ISA IRQ 6) to vector 64
fdc0: [FILTER]
unknown: status reg test failed ff
ex_isa_identify()
ahc_isa_probe 1: ioport 0x1c00 alloc failed
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
fdc: fdc0 already exists; skipping it
sio: sio0 already exists; skipping it
sio: sio1 already exists; skipping it
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xc0000-0xcafff pnpid ORM0000 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fe0: not probed (disabled)
ie0: not probed (disabled)
le0: not probed (disabled)
ppc0: parallel port found at 0x378
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppbus0: <Parallel port bus> on ppc0
ioapic0: routing intpin 7 (ISA IRQ 7) to vector 65
ppbus0: [MPSAFE]
ppbus0: [ITHREAD]
plip0: <PLIP network interface> on ppbus0
plip0: bpf attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ppc0: [GIANT-LOCKED]
ppc0: [ITHREAD]
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: sc (syscons terminal)
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
Reducing kern.maxvnodes 214488 -> 100000
procfs registered
lapic: Divisor 2, Frequency 133000479 hz
Timecounter "TSC" frequency 2660009400 Hz quality -100
Timecounters tick every 1.000 msec
lo0: bpf attached
hptrr: no controller detected.
Waiting 5 seconds for SCSI devices to settle
(noperiph:ahd0:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted.
ahd0: Selection Timeout on A:8. 0 SCBs aborted
ahd0: Selection Timeout on A:9. 0 SCBs aborted
ahd0: Selection Timeout on A:10. 0 SCBs aborted
ahd0: Selection Timeout on A:11. 0 SCBs aborted
ahd0: Selection Timeout on A:12. 0 SCBs aborted
ahd0: Selection Timeout on A:13. 0 SCBs aborted
ahd0: Selection Timeout on A:14. 0 SCBs aborted
ahd0: Selection Timeout on A:15. 0 SCBs aborted
(probe1:ahd0:0:1:0): Retrying Command
(probe5:ahd0:0:5:0): Retrying Command
(probe3:ahd0:0:3:0): Retrying Command
(probe6:ahd0:0:6:0): Retrying Command
(probe0:ahd0:0:0:0): Retrying Command
(probe2:ahd0:0:2:0): Retrying Command
(probe4:ahd0:0:4:0): Retrying Command
(probe1:ahd0:0:1:0): Down reving Protocol Version from 4 to 3?
(ahd0:A:1:0): Sending PPR bus_width 1, period 9, offset 7f, ppr_options 3f
(probe5:ahd0:0:5:0): Down reving Protocol Version from 4 to 3?
(probe6:ahd0:0:6:0): Down reving Protocol Version from 4 to 3?
(probe3:ahd0:0:3:0): Down reving Protocol Version from 4 to 3?
(probe0:ahd0:0:0:0): Down reving Protocol Version from 4 to 3?
(probe2:ahd0:0:2:0): Down reving Protocol Version from 4 to 3?
(ahd0:A:1:0): Received PPR width 1, period 9, offset 3f,options 2
Filtered to width 1, period 9, offset 3f, options 2
ahd0: target 1 using 16bit transfers
ahd0: target 1 synchronous with period = 0x9, offset = 0x3f(DT)
(probe4:ahd0:0:4:0): Down reving Protocol Version from 4 to 3?
(ahd0:A:5:0): Sending PPR bus_width 1, period 9, offset 7f, ppr_options 3f
(ahd0:A:5:0): Received PPR width 1, period 9, offset 3f,options 2
Filtered to width 1, period 9, offset 3f, options 2
ahd0: target 5 using 16bit transfers
ahd0: target 5 synchronous with period = 0x9, offset = 0x3f(DT)
(ahd0:A:6:0): Sending PPR bus_width 1, period 9, offset 7f, ppr_options 3f
(ahd0:A:6:0): Received PPR width 1, period 9, offset 3f,options 2
Filtered to width 1, period 9, offset 3f, options 2
ahd0: target 6 using 16bit transfers
ahd0: target 6 synchronous with period = 0x9, offset = 0x3f(DT)
(ahd0:A:3:0): Sending PPR bus_width 1, period 9, offset 7f, ppr_options 3f
(ahd0:A:3:0): Received PPR width 1, period 9, offset 3f,options 2
Filtered to width 1, period 9, offset 3f, options 2
ahd0: target 3 using 16bit transfers
ahd0: target 3 synchronous with period = 0x9, offset = 0x3f(DT)
(ahd0:A:0:0): Sending PPR bus_width 1, period 9, offset 7f, ppr_options 3f
(ahd0:A:0:0): Received PPR width 1, period 9, offset 3f,options 2
Filtered to width 1, period 9, offset 3f, options 2
ahd0: target 0 using 16bit transfers
ahd0: target 0 synchronous with period = 0x9, offset = 0x3f(DT)
(ahd0:A:2:0): Sending PPR bus_width 1, period 9, offset 7f, ppr_options 3f
(ahd0:A:2:0): Received PPR width 1, period 9, offset 3f,options 2
Filtered to width 1, period 9, offset 3f, options 2
ahd0: target 2 using 16bit transfers
ahd0: target 2 synchronous with period = 0x9, offset = 0x3f(DT)
(ahd0:A:4:0): Sending PPR bus_width 1, period 9, offset 7f, ppr_options 3f
(ahd0:A:4:0): Received PPR width 1, period 9, offset 3f,options 2
Filtered to width 1, period 9, offset 3f, options 2
ahd0: target 4 using 16bit transfers
ahd0: target 4 synchronous with period = 0x9, offset = 0x3f(DT)
da0 at ahd0 bus 0 target 0 lun 0
da0: <SEAGATE ST3300007LW 0004> Fixed Direct Access SCSI-3 device
da0: Serial Number 3KR0R48A00007602X3LC
da0: 160.000MB/s transfers (80.000MHz DT, offset 63, 16bit)
da0: Command Queueing Enabled
da0: 286102MB (585937500 512 byte sectors: 255H 63S/T 36472C)
da1 at ahd0 bus 0 target 1 lun 0
da1: <SEAGATE ST3300007LW 0005> Fixed Direct Access SCSI-3 device
da1: Serial Number 3KR3CH8F00009721LCEQ
da1: 160.000MB/s transfers (80.000MHz DT, offset 63, 16bit)
da1: Command Queueing Enabled
da1: 286102MB (585937500 512 byte sectors: 255H 63S/T 36472C)
da2 at ahd0 bus 0 target 2 lun 0
da2: <SEAGATE ST3300007LW 0005> Fixed Direct Access SCSI-3 device
da2: Serial Number 3KR3CH7500009721LD1Y
da2: 160.000MB/s transfers (80.000MHz DT, offset 63, 16bit)
da2: Command Queueing Enabled
da2: 286102MB (585937500 512 byte sectors: 255H 63S/T 36472C)
da3 at ahd0 bus 0 target 3 lun 0
da3: <SEAGATE ST3300007LW 0005> Fixed Direct Access SCSI-3 device
da3: Serial Number 3KR375V0000097215F6Y
da3: 160.000MB/s transfers (80.000MHz DT, offset 63, 16bit)
da3: Command Queueing Enabled
da3: 286102MB (585937500 512 byte sectors: 255H 63S/T 36472C)
GEOM: new disk da0
GEOM: new disk da1
GEOM: new disk da2
GEOM: new disk da3
pass0 at ahd0 bus 0 target 0 lun 0
pass0: <SEAGATE ST3300007LW 0004> Fixed Direct Access SCSI-3 device
pass0: Serial Number 3KR0R48A00007602X3LC
pass0: 160.000MB/s transfers (80.000MHz DT, offset 63, 16bit)
pass0: Command Queueing Enabled
da4 at ahd0 bus 0 target 4 lun 0
da4: <SEAGATE ST3300007LW 0005> Fixed Direct Access SCSI-3 device
da4: Serial Number 3KR3AJ5500009721LK3D
da4: 160.000MB/s transfers (80.000MHz DT, offset 63, 16bit)
da4: Command Queueing Enabled
da4: 286102MB (585937500 512 byte sectors: 255H 63S/T 36472C)
da5 at ahd0 bus 0 target 5 lun 0
da5: <SEAGATE ST3300007LW 0005> Fixed Direct Access SCSI-3 device
da5: Serial Number 3KR3AJSE00009721LLGK
da5: 160.000MB/s transfers (80.000MHz DT, offset 63, 16bit)
da5: Command Queueing Enabled
da5: 286102MB (585937500 512 byte sectors: 255H 63S/T 36472C)
da6 at ahd0 bus 0 target 6 lun 0
da6: <SEAGATE ST3300007LW 0005> Fixed Direct Access SCSI-3 device
da6: Serial Number 3KR3B8ED00009721NTRC
da6: 160.000MB/s transfers (80.000MHz DT, offset 63, 16bit)
da6: Command Queueing Enabled
da6: 286102MB (585937500 512 byte sectors: 255H 63S/T 36472C)
pass1 at ahd0 bus 0 target 1 lun 0
pass1: <SEAGATE ST3300007LW 0005> Fixed Direct Access SCSI-3 device
pass1: Serial Number 3KR3CH8F00009721LCEQ
pass1: 160.000MB/s transfers (80.000MHz DT, offset 63, 16bit)
pass1: Command Queueing Enabled
pass2 at ahd0 bus 0 target 2 lun 0
pass2: <SEAGATE ST3300007LW 0005> Fixed Direct Access SCSI-3 device
pass2: Serial Number 3KR3CH7500009721LD1Y
pass2: 160.000MB/s transfers (80.000MHz DT, offset 63, 16bit)
pass2: Command Queueing Enabled
pass3 at ahd0 bus 0 target 3 lun 0
pass3: <SEAGATE ST3300007LW 0005> Fixed Direct Access SCSI-3 device
pass3: Serial Number 3KR375V0000097215F6Y
pass3: 160.000MB/s transfers (80.000MHz DT, offset 63, 16bit)
pass3: Command Queueing Enabled
pass4 at ahd0 bus 0 target 4 lun 0
pass4: <SEAGATE ST3300007LW 0005> Fixed Direct Access SCSI-3 device
pass4: Serial Number 3KR3AJ5500009721LK3D
pass4: 160.000MB/s transfers (80.000MHz DT, offset 63, 16bit)
pass4: Command Queueing Enabled
pass5 at ahd0 bus 0 target 5 lun 0
pass5: <SEAGATE ST3300007LW 0005> Fixed Direct Access SCSI-3 device
pass5: Serial Number 3KR3AJSE00009721LLGK
pass5: 160.000MB/s transfers (80.000MHz DT, offset 63, 16bit)
pass5: Command Queueing Enabled
pass6 at ahd0 bus 0 target 6 lun 0
pass6: <SEAGATE ST3300007LW 0005> Fixed Direct Access SCSI-3 device
pass6: Serial Number 3KR3B8ED00009721NTRC
pass6: 160.000MB/s transfers (80.000MHz DT, offset 63, 16bit)
pass6: Command Queueing Enabled
ATA PseudoRAID loaded
SMP: AP CPU #1 Launched!
cpu1 AP:
ID: 0x01000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
ioapic0: Assigning ISA IRQ 1 to local APIC 0
ioapic0: Assigning ISA IRQ 3 to local APIC 1
ioapic0: Assigning ISA IRQ 4 to local APIC 0
ioapic0: Assigning ISA IRQ 6 to local APIC 1
ioapic0: Assigning ISA IRQ 7 to local APIC 0
ioapic0: Assigning ISA IRQ 9 to local APIC 1
ioapic0: Assigning ISA IRQ 14 to local APIC 0
ioapic0: Assigning ISA IRQ 15 to local APIC 1
ioapic0: Assigning PCI IRQ 16 to local APIC 0
ioapic0: Assigning PCI IRQ 17 to local APIC 1
ioapic0: Assigning PCI IRQ 18 to local APIC 0
ioapic1: Assigning PCI IRQ 26 to local APIC 1
ioapic1: Assigning PCI IRQ 28 to local APIC 0
ioapic2: Assigning PCI IRQ 48 to local APIC 1
ioapic2: Assigning PCI IRQ 49 to local APIC 0
msi: Assigning MSI IRQ 256 to local APIC 1
msi: Assigning MSI IRQ 257 to local APIC 0
msi: Assigning MSI IRQ 258 to local APIC 1
GEOM: new disk da4
GEOM: new disk da5
GEOM: new disk da6
Trying to mount root from ufs:/dev/da0s1a
start_init: trying /sbin/init
ACPI Error (psargs-0459): [\_SB_.PCI0.PSKB] Namespace lookup failure, AE_NOT_FOUND
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.PCI0.LPC0.SIO_.KBC0._STA] (Node 0xc68acc20), AE_NOT_FOUND
ACPI Error (psargs-0459): [\_SB_.PCI0.PSKB] Namespace lookup failure, AE_NOT_FOUND
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.PCI0.LPC0.SIO_.KBC0._STA] (Node 0xc68acc20), AE_NOT_FOUND
ACPI Error (psargs-0459): [\_SB_.PCI0.PSMS] Namespace lookup failure, AE_NOT_FOUND
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.PCI0.LPC0.SIO_.MSE0._STA] (Node 0xc68acb40), AE_NOT_FOUND
ACPI Error (psargs-0459): [\_SB_.PCI0.PSMS] Namespace lookup failure, AE_NOT_FOUND
ACPI Error (psparse-0626): Method parse/execution failed [\_SB_.PCI0.LPC0.SIO_.MSE0._STA] (Node 0xc68acb40), AE_NOT_FOUND
GEOM_LABEL: Label for provider ccd0a is ufs/home.
GEOM_LABEL: Label ufs/home removed.
GEOM_LABEL: Label for provider ccd0a is ufs/home.
GEOM_LABEL: Label ufs/home removed.
Linux ELF exec handler installed
linprocfs registered
lagg0: bpf attached
em4: Link is up 100 Mbps Full Duplex
em4: link state changed to UP
em3: Link is up 1000 Mbps Full Duplex
em3: link state changed to UP
em0: Link is up 1000 Mbps Full Duplex
em0: link state changed to UP
lagg0: link state changed to UP
em1: Link is up 1000 Mbps Full Duplex
em1: link state changed to UP
em2: Link is up 1000 Mbps Full Duplex
em2: link state changed to UP
calcru: runtime went backwards from 553 usec to 208 usec for pid 1165 (svnserve.bin)
calcru: runtime went backwards from 17333 usec to 6516 usec for pid 1164 (python2.5)
calcru: runtime went backwards from 1631 usec to 613 usec for pid 1141 (radiusd)
calcru: runtime went backwards from 5791 usec to 2213 usec for pid 1136 (apcupsd)
calcru: runtime went backwards from 214 usec to 80 usec for pid 1125 (nfsd)
calcru: runtime went backwards from 228 usec to 85 usec for pid 1124 (nfsd)
calcru: runtime went backwards from 233 usec to 87 usec for pid 1123 (nfsd)
calcru: runtime went backwards from 208 usec to 78 usec for pid 1122 (nfsd)
calcru: runtime went backwards from 221 usec to 83 usec for pid 1121 (nfsd)
calcru: runtime went backwards from 221 usec to 83 usec for pid 1119 (nfsd)
calcru: runtime went backwards from 220 usec to 82 usec for pid 1118 (nfsd)
calcru: runtime went backwards from 241 usec to 90 usec for pid 1117 (nfsd)
calcru: runtime went backwards from 250 usec to 94 usec for pid 1116 (nfsd)
calcru: runtime went backwards from 403 usec to 151 usec for pid 1115 (nfsd)
calcru: runtime went backwards from 61648 usec to 23176 usec for pid 1114 (nfsd)
calcru: runtime went backwards from 2211 usec to 831 usec for pid 1099 (mountd)
calcru: runtime went backwards from 11176 usec to 4201 usec for pid 1068 (amd)
calcru: runtime went backwards from 911 usec to 342 usec for pid 1068 (amd)
calcru: runtime went backwards from 2543 usec to 956 usec for pid 1008 (ypserv)
calcru: runtime went backwards from 9841 usec to 3699 usec for pid 1005 (rpcbind)
calcru: runtime went backwards from 101965 usec to 38787 usec for pid 974 (named)
calcru: runtime went backwards from 41773 usec to 15740 usec for pid 900 (syslogd)
calcru: runtime went backwards from 1836 usec to 690 usec for pid 814 (devd)
calcru: runtime went backwards from 116730 usec to 43883 usec for pid 814 (devd)
calcru: runtime went backwards from 88 usec to 33 usec for pid 575 (pfpurge)
calcru: runtime went backwards from 456 usec to 171 usec for pid 197 (adjkerntz)
calcru: runtime went backwards from 55363 usec to 21318 usec for pid 59 (sh)
calcru: runtime went backwards from 3225616 usec to 1220593 usec for pid 59 (sh)
calcru: runtime went backwards from 1802 usec to 677 usec for pid 58 (schedcpu)
calcru: runtime went backwards from 1126 usec to 423 usec for pid 57 (softdepflush)
calcru: runtime went backwards from 3330 usec to 1251 usec for pid 56 (vnlru)
calcru: runtime went backwards from 977 usec to 369 usec for pid 55 (syncer)
calcru: runtime went backwards from 150 usec to 56 usec for pid 54 (bufdaemon)
calcru: runtime went backwards from 4 usec to 1 usec for pid 53 (pagezero)
calcru: runtime went backwards from 5 usec to 1 usec for pid 52 (vmdaemon)
calcru: runtime went backwards from 196 usec to 73 usec for pid 51 (pagedaemon)
calcru: runtime went backwards from 47 usec to 17 usec for pid 50 (sctp_iterator)
calcru: runtime went backwards from 195 usec to 77 usec for pid 48 (fdc0)
calcru: runtime went backwards from 149 usec to 56 usec for pid 47 (swi0: sio)
calcru: runtime went backwards from 1075 usec to 406 usec for pid 39 (em4 taskq)
calcru: runtime went backwards from 12 usec to 6 usec for pid 38 (em3 taskq)
calcru: runtime went backwards from 89 usec to 37 usec for pid 37 (em2 taskq)
calcru: runtime went backwards from 111815 usec to 42120 usec for pid 34 (irq18: uhci2 ehci*)
calcru: runtime went backwards from 825 usec to 313 usec for pid 27 (em1 taskq)
calcru: runtime went backwards from 1865 usec to 715 usec for pid 26 (em0 taskq)
calcru: runtime went backwards from 23362 usec to 8840 usec for pid 24 (irq26: ahd0)
calcru: runtime went backwards from 138727 usec to 52153 usec for pid 21 (swi6: task queue)
calcru: runtime went backwards from 13717 usec to 5156 usec for pid 18 (swi5: +)
calcru: runtime went backwards from 35966 usec to 13585 usec for pid 17 (swi2: cambio)
calcru: runtime went backwards from 7656 usec to 2892 usec for pid 16 (yarrow)
calcru: runtime went backwards from 54358 usec to 20547 usec for pid 4 (g_down)
calcru: runtime went backwards from 37093 usec to 14023 usec for pid 3 (g_up)
calcru: runtime went backwards from 47289 usec to 17779 usec for pid 2 (g_event)
calcru: runtime went backwards from 148 usec to 79 usec for pid 15 (swi1: net)
calcru: runtime went backwards from 100565 usec to 45676 usec for pid 13 (swi4: clock sio)
calcru: runtime went backwards from 103969445 usec to 39126541 usec for pid 12 (idle: cpu0)
calcru: runtime went backwards from 103073708 usec to 38794601 usec for pid 11 (idle: cpu1)
calcru: runtime went backwards from 4761 usec to 1794 usec for pid 1 (init)
calcru: runtime went backwards from 322446 usec to 121220 usec for pid 1 (init)
calcru: runtime went backwards from 31719 usec to 11924 usec for pid 0 (swapper)
splash: image decoder found: logo_saver
(da0:ahd0:0:0:0): Request Requeued
(da0:ahd0:0:0:0): Retrying Command
(da0:ahd0:0:0:0): Request Requeued
(da0:ahd0:0:0:0): Retrying Command
(da0:ahd0:0:0:0): Request Requeued
(da0:ahd0:0:0:0): Retrying Command
(da0:ahd0:0:0:0): Request Requeued
(da0:ahd0:0:0:0): Retrying Command
(da0:ahd0:0:0:0): Request Requeued
(da0:ahd0:0:0:0): Retrying Command
(da0:ahd0:0:0:0): Request Requeued
(da0:ahd0:0:0:0): Retrying Command
(da0:ahd0:0:0:0): Queue Full
(da0:ahd0:0:0:0): tagged openings now 64
(da0:ahd0:0:0:0): Retrying Command
(da0:ahd0:0:0:0): Queue Full
(da0:ahd0:0:0:0): tagged openings now 63
(da0:ahd0:0:0:0): Retrying Command
(da0:ahd0:0:0:0): Queue Full
(da0:ahd0:0:0:0): tagged openings now 62
(da0:ahd0:0:0:0): Retrying Command
(da0:ahd0:0:0:0): Queue Full
(da0:ahd0:0:0:0): tagged openings now 61
(da0:ahd0:0:0:0): Retrying Command
(da0:ahd0:0:0:0): Queue Full
(da0:ahd0:0:0:0): tagged openings now 60
(da0:ahd0:0:0:0): Retrying Command
(da0:ahd0:0:0:0): Queue Full
(da0:ahd0:0:0:0): tagged openings now 59
(da0:ahd0:0:0:0): Retrying Command
(da0:ahd0:0:0:0): Queue Full
(da0:ahd0:0:0:0): tagged openings now 58
(da0:ahd0:0:0:0): Retrying Command
(da0:ahd0:0:0:0): Queue Full
(da0:ahd0:0:0:0): tagged openings now 57
(da0:ahd0:0:0:0): Retrying Command
(da0:ahd0:0:0:0): Queue Full
(da0:ahd0:0:0:0): tagged openings now 56
(da0:ahd0:0:0:0): Retrying Command
(da0:ahd0:0:0:0): Queue Full
(da0:ahd0:0:0:0): tagged openings now 55
(da0:ahd0:0:0:0): Retrying Command
(da0:ahd0:0:0:0): Queue Full
(da0:ahd0:0:0:0): tagged openings now 54
(da0:ahd0:0:0:0): Retrying Command
(da0:ahd0:0:0:0): Queue Full
(da0:ahd0:0:0:0): tagged openings now 53
(da0:ahd0:0:0:0): Retrying Command
(da0:ahd0:0:0:0): Queue Full
(da0:ahd0:0:0:0): tagged openings now 52
(da0:ahd0:0:0:0): Retrying Command
(da0:ahd0:0:0:0): Queue Full
(da0:ahd0:0:0:0): tagged openings now 51
(da0:ahd0:0:0:0): Retrying Command
(da0:ahd0:0:0:0): Queue Full
(da0:ahd0:0:0:0): tagged openings now 50
(da0:ahd0:0:0:0): Retrying Command
(da0:ahd0:0:0:0): Queue Full
(da0:ahd0:0:0:0): tagged openings now 49
(da0:ahd0:0:0:0): Retrying Command
(da0:ahd0:0:0:0): Queue Full
(da0:ahd0:0:0:0): tagged openings now 48
(da0:ahd0:0:0:0): Retrying Command
(da0:ahd0:0:0:0): Queue Full
(da0:ahd0:0:0:0): tagged openings now 47
(da0:ahd0:0:0:0): Retrying Command
(da0:ahd0:0:0:0): Queue Full
(da0:ahd0:0:0:0): tagged openings now 46
(da0:ahd0:0:0:0): Retrying Command
(da0:ahd0:0:0:0): Queue Full
(da0:ahd0:0:0:0): tagged openings now 45
(da0:ahd0:0:0:0): Retrying Command
(da0:ahd0:0:0:0): Queue Full
(da0:ahd0:0:0:0): tagged openings now 44
(da0:ahd0:0:0:0): Retrying Command
(da0:ahd0:0:0:0): Queue Full
(da0:ahd0:0:0:0): tagged openings now 43
(da0:ahd0:0:0:0): Retrying Command
(da0:ahd0:0:0:0): Queue Full
(da0:ahd0:0:0:0): tagged openings now 42
(da0:ahd0:0:0:0): Retrying Command
(da0:ahd0:0:0:0): Queue Full
(da0:ahd0:0:0:0): tagged openings now 41
(da0:ahd0:0:0:0): Retrying Command
(da0:ahd0:0:0:0): Queue Full
(da0:ahd0:0:0:0): tagged openings now 40
(da0:ahd0:0:0:0): Retrying Command
(da0:ahd0:0:0:0): Queue Full
(da0:ahd0:0:0:0): tagged openings now 39
(da0:ahd0:0:0:0): Retrying Command
(da0:ahd0:0:0:0): Queue Full
(da0:ahd0:0:0:0): tagged openings now 38
(da0:ahd0:0:0:0): Retrying Command
(da0:ahd0:0:0:0): Queue Full
(da0:ahd0:0:0:0): tagged openings now 37
(da0:ahd0:0:0:0): Retrying Command
(da0:ahd0:0:0:0): Queue Full
(da0:ahd0:0:0:0): tagged openings now 36
(da0:ahd0:0:0:0): Retrying Command
(da0:ahd0:0:0:0): Queue Full
(da0:ahd0:0:0:0): tagged openings now 35
(da0:ahd0:0:0:0): Retrying Command
(da0:ahd0:0:0:0): Queue Full
(da0:ahd0:0:0:0): tagged openings now 34
(da0:ahd0:0:0:0): Retrying Command
(da0:ahd0:0:0:0): Queue Full
(da0:ahd0:0:0:0): tagged openings now 33
(da0:ahd0:0:0:0): Retrying Command