rendered paste bodyLinux version 2.6.17.14 (root@stepperctrl) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #1 Thu Apr 5 02:13:43 EDT 2007
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000ffc0000 (usable)
BIOS-e820: 000000000ffc0000 - 000000000fff8000 (ACPI data)
BIOS-e820: 000000000fff8000 - 0000000010000000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffb80000 - 00000000ffc00000 (reserved)
BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
255MB LOWMEM available.
On node 0 totalpages: 65472
DMA zone: 4096 pages, LIFO batch:0
Normal zone: 61376 pages, LIFO batch:15
DMI 2.3 present.
Allocating PCI resources starting at 20000000 (gap: 10000000:eec00000)
Built 1 zonelists
Kernel command line: root=/dev/hda1 ro vga=771 vga=771 quiet
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 1024 (order: 10, 4096 bytes)
Detected 1993.920 MHz processor.
Using tsc for high-res timesource
I-pipe 1.3-08: pipeline enabled.
Console: colour dummy device 80x25
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 252856k/261888k available (1467k kernel code, 8516k reserved, 442k data, 140k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 3992.70 BogoMIPS (lpj=7985408)
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 128K
CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU: Intel(R) Celeron(R) CPU 2.00GHz stepping 07
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 0k freed
checking if image is initramfs... it is
Freeing initrd memory: 4010k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfda95, last bus=2
Setting up standard PCI resources
Linux Plug and Play Support v0.97 (c) Adam Belay
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI quirk: region 0400-047f claimed by ICH4 ACPI/GPIO/TCO
PCI quirk: region 0500-053f claimed by ICH4 GPIO
PCI: Transparent bridge - 0000:00:1e.0
PCI: Using IRQ router PIIX/ICH [8086/2440] at 0000:00:1f.0
TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca)
PCI: Bridge: 0000:00:01.0
IO window: disabled.
MEM window: ff800000-ff8fffff
PREFETCH window: f6900000-f69fffff
PCI: Bridge: 0000:00:1e.0
IO window: c000-dfff
MEM window: ff900000-ff9fffff
PREFETCH window: f6a00000-f6afffff
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 8192 bind 4096)
TCP reno registered
audit: initializing netlink socket (disabled)
audit(1202575691.808:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
PCI: Found IRQ 10 for device 0000:02:09.0
PCI: Found IRQ 11 for device 0000:02:0b.0
PCI: Sharing IRQ 11 with 0000:00:1f.4
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI Shortcut mode
Freeing unused kernel memory: 140k freed
PCI: Found IRQ 12 for device 0000:02:0a.0
3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
0000:02:0a.0: 3Com PCI 3c905B Cyclone 100baseTx at d0814c00.
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH2: IDE controller at PCI slot 0000:00:1f.1
ICH2: chipset revision 5
ICH2: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
Probing IDE interface ide0...
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v3.0
hda: Maxtor 2F030J0, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
PCI: Found IRQ 9 for device 0000:00:1f.2
PCI: Setting latency timer of device 0000:00:1f.2 to 64
uhci_hcd 0000:00:1f.2: UHCI Host Controller
uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1f.2: irq 9, io base 0x0000ef40
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
PCI: Found IRQ 11 for device 0000:00:1f.4
PCI: Sharing IRQ 11 with 0000:02:0b.0
PCI: Setting latency timer of device 0000:00:1f.4 to 64
uhci_hcd 0000:00:1f.4: UHCI Host Controller
uhci_hcd 0000:00:1f.4: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1f.4: irq 11, io base 0x0000ef80
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
hda: max request size: 128KiB
hda: 60058656 sectors (30750 MB) w/2048KiB Cache, CHS=59582/16/63, UDMA(100)
hda: cache flushes supported
hda: hda1 hda2
usb 2-2: new full speed USB device using uhci_hcd and address 2
usb 2-2: configuration #1 chosen from 1 choice
hub 2-2:1.0: USB hub found
hub 2-2:1.0: 4 ports detected
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected an Intel i845 Chipset.
agpgart: AGP aperture is 64M @ 0xf8000000
parport_pc: ITE8875 found (1P)
parport0: PC-style at 0xc800 [PCSPP,TRISTATE,EPP]
parport_pc: ITE 8872 parallel port: io=0xC800
parport_pc: ITE8875 found (1P)
parport1: PC-style at 0xdb00 [PCSPP,TRISTATE,EPP]
parport_pc: ITE 8872 parallel port: io=0xDB00
parport2: PC-style at 0x378 [PCSPP,TRISTATE,EPP]
Adding 690784k swap on /dev/hda2. Priority:-1 extents:1 across:690784k
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on hda1, internal journal
loop: loaded (max 8 devices)
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
device-mapper: 4.6.0-ioctl (2006-02-17) initialised: dm-devel@redhat.com
end_request: I/O error, dev fd0, sector 0
PCI: Found IRQ 12 for device 0000:02:0a.0
eth0: setting full-duplex.
I-pipe: Domain RTAI registered.
RTAI[hal]: <3.4> mounted over IPIPE-NOTHREADS 1.3-08.
RTAI[hal]: compiled with gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21).
RTAI[hal]: mounted (IPIPE-NOTHREADS, IMMEDIATE (INTERNAL IRQs VECTORED), ISOL_CPUS_MASK: 0).
PIPELINE layers:
d0949680 9ac15d93 RTAI 200
c02a8080 0 Linux 100
RTAI[malloc]: vmalloced extent d099b000, size 2097152.
RTAI[malloc]: loaded (global heap size=2097152 bytes).
RTAI[sched]: loaded (IMMEDIATE, UP, USER/KERNEL SPACE<with RTAI TASKs>: ).
RTAI[sched]: hard timer type/freq = 8254-PIT/1193180(Hz); default timing mode is periodic; linear ordering of timed lists.
RTAI[sched]: Linux timer freq = 250 (Hz), CPU freq = 1993920000 hz.
RTAI[sched]: timer setup = 2010 ns, resched latency = 2689 ns.
RTAI[math]: loaded.
BUG: unable to handle kernel paging request at virtual address 48414c4e
printing eip:
c0157f7f
*pde = 00000000
Oops: 0000 [#1]
Modules linked in: hal_lib rtapi rtai_math rtai_sem rtai_shm rtai_fifos rtai_sched rtai_hal dm_mod floppy loop i2c_i801 i2c_core serio_raw psmouse intel_agp agpgart ext3 jbd mbcache ide_disk generic uhci_hcd usbcore piix ide_core 3c59x mii
CPU: 0
EIP: 0060:[<c0157f7f>] Not tainted VLI
EFLAGS: 00010246 (2.6.17.14 #1)
EIP is at __free_pipe_info+0xf/0x4b
eax: 48414c32 ebx: 48414c42 ecx: cf10a58c edx: c02a8080
esi: 00000000 edi: 48414c32 ebp: c123ba70 esp: cecf1f50
ds: 007b es: 007b ss: 0068
Process halcmd (pid: 1942, threadinfo=cecf0000 task=cf06aa70)
Stack: cfe962a4 cfe962a4 cfe962a4 cf06aa70 00000010 c011638c 48414c32 00000011
00000001 b7de1358 cecf1f8c cf06ab20 cf06ab58 00000021 cf06ab20 cecf1f8c
cecf1f8c cff6d840 cecf0000 00000100 cecf0000 c01167a3 b7de1358 00000001
Call Trace:
<c011638c> do_exit+0x428/0x810 <c01167a3> do_group_exit+0x2f/0x68
<c01028d6> sysenter_past_esp+0x63/0x67
Code: 00 85 c0 74 dd b8 f2 ff ff ff 83 c4 0c 5b 5e 5f 5d c3 31 c0 83 c4 0c 5b 5e 5f 5d c3 57 56 53 83 ec 08 8b 7c 24 18 31 f6 8d 5f 10 <8b> 43 0c 85 c0 74 0a 89 5c 24 04 89 3c 24 ff 50 10 83 c6 01 83
EIP: [<c0157f7f>] __free_pipe_info+0xf/0x4b SS:ESP 0068:cecf1f50
<1>Fixing recursive fault but reboot is needed!
BUG: unable to handle kernel paging request at virtual address 48414c4e
printing eip:
c0157f7f
*pde = 00000000
Oops: 0000 [#2]
Modules linked in: hal_lib rtapi rtai_math rtai_sem rtai_shm rtai_fifos rtai_sched rtai_hal dm_mod floppy loop i2c_i801 i2c_core serio_raw psmouse intel_agp agpgart ext3 jbd mbcache ide_disk generic uhci_hcd usbcore piix ide_core 3c59x mii
CPU: 0
EIP: 0060:[<c0157f7f>] Not tainted VLI
EFLAGS: 00010246 (2.6.17.14 #1)
EIP is at __free_pipe_info+0xf/0x4b
eax: 48414c32 ebx: 48414c42 ecx: cea33f8c edx: cea33f8c
esi: 00000000 edi: 48414c32 ebp: c123ba70 esp: cea33f50
ds: 007b es: 007b ss: 0068
Process halcmd (pid: 1949, threadinfo=cea32000 task=cfbe7a70)
Stack: c0149c69 cff79550 00000000 cfbe7a70 00000010 c011638c 48414c32 00000011
00000001 b7e23358 cea33f8c cfbe7b20 cfbe7b58 00000021 cfbe7b20 cea33f8c
cea33f8c cff6d840 cea32000 00000100 cea32000 c01167a3 b7e23358 00000001
Call Trace:
<c0149c69> kmem_cache_free+0x11/0x43 <c011638c> do_exit+0x428/0x810
<c01167a3> do_group_exit+0x2f/0x68 <c01028d6> sysenter_past_esp+0x63/0x67
Code: 00 85 c0 74 dd b8 f2 ff ff ff 83 c4 0c 5b 5e 5f 5d c3 31 c0 83 c4 0c 5b 5e 5f 5d c3 57 56 53 83 ec 08 8b 7c 24 18 31 f6 8d 5f 10 <8b> 43 0c 85 c0 74 0a 89 5c 24 04 89 3c 24 ff 50 10 83 c6 01 83
EIP: [<c0157f7f>] __free_pipe_info+0xf/0x4b SS:ESP 0068:cea33f50
<1>Fixing recursive fault but reboot is needed!
BUG: unable to handle kernel paging request at virtual address 48414c4e
printing eip:
c0157f7f
*pde = 00000000
Oops: 0000 [#3]
Modules linked in: hal_lib rtapi rtai_math rtai_sem rtai_shm rtai_fifos rtai_sched rtai_hal dm_mod floppy loop i2c_i801 i2c_core serio_raw psmouse intel_agp agpgart ext3 jbd mbcache ide_disk generic uhci_hcd usbcore piix ide_core 3c59x mii
CPU: 0
EIP: 0060:[<c0157f7f>] Not tainted VLI
EFLAGS: 00010246 (2.6.17.14 #1)
EIP is at __free_pipe_info+0xf/0x4b
eax: 48414c32 ebx: 48414c42 ecx: cea3df8c edx: cea3df8c
esi: 00000000 edi: 48414c32 ebp: c123ba70 esp: cea3df50
ds: 007b es: 007b ss: 0068
Process halcmd (pid: 1993, threadinfo=cea3c000 task=cfbe7550)
Stack: c0149c69 cff79550 00000000 cfbe7550 00000010 c011638c 48414c32 00000011
00000001 b7df9358 cea3df8c cfbe7600 cfbe7638 00000021 cfbe7600 cea3df8c
cea3df8c cff6d840 cea3c000 00000100 cea3c000 c01167a3 b7df9358 00000001
Call Trace:
<c0149c69> kmem_cache_free+0x11/0x43 <c011638c> do_exit+0x428/0x810
<c01167a3> do_group_exit+0x2f/0x68 <c01028d6> sysenter_past_esp+0x63/0x67
Code: 00 85 c0 74 dd b8 f2 ff ff ff 83 c4 0c 5b 5e 5f 5d c3 31 c0 83 c4 0c 5b 5e 5f 5d c3 57 56 53 83 ec 08 8b 7c 24 18 31 f6 8d 5f 10 <8b> 43 0c 85 c0 74 0a 89 5c 24 04 89 3c 24 ff 50 10 83 c6 01 83
EIP: [<c0157f7f>] __free_pipe_info+0xf/0x4b SS:ESP 0068:cea3df50
<1>Fixing recursive fault but reboot is needed!
BUG: unable to handle kernel paging request at virtual address 48414c4e
printing eip:
c0157f7f
*pde = 00000000
Oops: 0000 [#4]
Modules linked in: hal_lib rtapi rtai_math rtai_sem rtai_shm rtai_fifos rtai_sched rtai_hal dm_mod floppy loop i2c_i801 i2c_core serio_raw psmouse intel_agp agpgart ext3 jbd mbcache ide_disk generic uhci_hcd usbcore piix ide_core 3c59x mii
CPU: 0
EIP: 0060:[<c0157f7f>] Not tainted VLI
EFLAGS: 00010246 (2.6.17.14 #1)
EIP is at __free_pipe_info+0xf/0x4b
eax: 48414c32 ebx: 48414c42 ecx: cea3ff8c edx: cea3ff8c
esi: 00000000 edi: 48414c32 ebp: c123ba70 esp: cea3ff50
ds: 007b es: 007b ss: 0068
Process halcmd (pid: 2009, threadinfo=cea3e000 task=cfbe7030)
Stack: c0149c69 cff79550 00000000 cfbe7030 00000010 c011638c 48414c32 00000011
00000001 b7dd3358 cea3ff8c cfbe70e0 cfbe7118 00000021 cfbe70e0 cea3ff8c
cea3ff8c cff6d840 cea3e000 00000100 cea3e000 c01167a3 b7dd3358 00000001
Call Trace:
<c0149c69> kmem_cache_free+0x11/0x43 <c011638c> do_exit+0x428/0x810
<c01167a3> do_group_exit+0x2f/0x68 <c01028d6> sysenter_past_esp+0x63/0x67
Code: 00 85 c0 74 dd b8 f2 ff ff ff 83 c4 0c 5b 5e 5f 5d c3 31 c0 83 c4 0c 5b 5e 5f 5d c3 57 56 53 83 ec 08 8b 7c 24 18 31 f6 8d 5f 10 <8b> 43 0c 85 c0 74 0a 89 5c 24 04 89 3c 24 ff 50 10 83 c6 01 83
EIP: [<c0157f7f>] __free_pipe_info+0xf/0x4b SS:ESP 0068:cea3ff50
<1>Fixing recursive fault but reboot is needed!
RTAI[math]: unloaded.
SHM_CLEANUP_MODULE releases: 'CF$Z8N':0x48414c32:1212238898 (131072).
RTAI[malloc]: vfreed extent d099b000, size 2097152.
RTAI[malloc]: unloaded.
RTAI[sched]: unloaded (forced hard/soft/hard transitions: traps 0, syscalls 0).
I-pipe: Domain RTAI unregistered.
RTAI[hal]: unmounted.