rendered paste bodyLinux version 2.6.23.1 (root@ravanan) (gcc version 4.2.1 (Debian 4.2.1-3)) #1 SMP Tue Oct 23 18:41:55 IST 2007
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000cf320000 (usable)
BIOS-e820: 00000000cf320000 - 00000000cf322000 (reserved)
BIOS-e820: 00000000cf322000 - 00000000cf3fa000 (usable)
BIOS-e820: 00000000cf3fa000 - 00000000cf4ea000 (ACPI NVS)
BIOS-e820: 00000000cf4ea000 - 00000000cf4ed000 (usable)
BIOS-e820: 00000000cf4ed000 - 00000000cf4f3000 (ACPI data)
BIOS-e820: 00000000cf4f3000 - 00000000cf4f4000 (usable)
BIOS-e820: 00000000cf4f4000 - 00000000cf4ff000 (ACPI data)
BIOS-e820: 00000000cf4ff000 - 00000000cf500000 (usable)
BIOS-e820: 00000000cf500000 - 00000000d0000000 (reserved)
BIOS-e820: 00000000f0000000 - 00000000f8000000 (reserved)
BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 000000012c000000 (usable)
3904MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000fe200
NX (Execute Disable) protection: active
Entering add_active_range(0, 0, 1228800) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 229376
HighMem 229376 -> 1228800
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0 -> 1228800
On node 0 totalpages: 1228800
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 1760 pages used for memmap
Normal zone: 223520 pages, LIFO batch:31
HighMem zone: 7808 pages used for memmap
HighMem zone: 991616 pages, LIFO batch:31
Movable zone: 0 pages used for memmap
DMI 2.4 present.
Intel MultiProcessor Specification v1.4
Virtual Wire compatibility mode.
OEM ID: Product ID: APIC at: 0xFEE00000
Processor #0 6:15 APIC version 20
Enabling APIC mode: Flat. Using 0 I/O APICs
BIOS bug, no explicit IRQ entries, using default mptable. (tell your hw vendor)
Processors: 1
Allocating PCI resources starting at d2000000 (gap: d0000000:20000000)
Built 1 zonelists in Zone order. Total pages: 1219200
Kernel command line: root=/dev/sda1 ro acpi=off
mapped APIC to ffffb000 (fee00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 2666.454 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 4067756k/4915200k available (1666k kernel code, 47512k reserved, 650k data, 220k init, 3198964k highmem)
virtual kernel memory layout:
fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB)
pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
vmalloc : 0xf8800000 - 0xffbfe000 ( 115 MB)
lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
.init : 0xc0349000 - 0xc0380000 ( 220 kB)
.data : 0xc02a0a6c - 0xc0343660 ( 650 kB)
.text : 0xc0100000 - 0xc02a0a6c (1666 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 5336.59 BogoMIPS (lpj=10673196)
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3fd 00000000 00000001 00000000
monitor/mwait feature present.
using mwait in idle threads.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3fd 00000000 00000001 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 11k freed
CPU0: Intel(R) Core(TM)2 Duo CPU E6750 @ 2.66GHz stepping 0b
Total of 1 processors activated (5336.59 BogoMIPS).
Brought up 1 CPUs
NET: Registered protocol family 16
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI: disabled
PnPBIOS: Scanning system for PnP BIOS support...
PnPBIOS: Found PnP BIOS installation structure at 0xc00fe0e0
PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xb081, dseg 0x400
PnPBIOS: 2 nodes reported by PnP BIOS; 2 recorded by driver
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Transparent bridge - 0000:00:1e.0
PCI: Using IRQ router PIIX/ICH [8086/2912] at 0000:00:1f.0
PCI: setting IRQ 9 as level-triggered
PCI: Found IRQ 9 for device 0000:00:1c.0
PCI: Sharing IRQ 9 with 0000:00:1a.2
PCI: Sharing IRQ 9 with 0000:00:1a.7
PCI: Sharing IRQ 9 with 0000:00:1c.4
PCI: Sharing IRQ 9 with 0000:02:00.0
PCI: Found IRQ 9 for device 0000:00:1c.1
PCI: Sharing IRQ 9 with 0000:00:19.0
PCI: setting IRQ 10 as level-triggered
PCI: Found IRQ 10 for device 0000:00:1c.2
PCI: Sharing IRQ 10 with 0000:00:1a.0
PCI: Sharing IRQ 10 with 0000:00:1d.2
PCI: Sharing IRQ 10 with 0000:00:1f.3
PCI: setting IRQ 11 as level-triggered
PCI: Found IRQ 11 for device 0000:00:1c.3
PCI: Sharing IRQ 11 with 0000:00:1d.1
PCI: Sharing IRQ 11 with 0000:06:03.0
NET: Registered protocol family 8
NET: Registered protocol family 20
PCI: Bridge: 0000:00:1c.0
IO window: disabled.
MEM window: e0400000-e04fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.1
IO window: 1000-1fff
MEM window: e0100000-e01fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.2
IO window: disabled.
MEM window: e0500000-e05fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.3
IO window: disabled.
MEM window: e0600000-e06fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.4
IO window: disabled.
MEM window: e0700000-e07fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1e.0
IO window: disabled.
MEM window: e0000000-e00fffff
PREFETCH window: disabled.
PCI: Enabling device 0000:00:1c.0 (0000 -> 0002)
PCI: Found IRQ 9 for device 0000:00:1c.0
PCI: Sharing IRQ 9 with 0000:00:1a.2
PCI: Sharing IRQ 9 with 0000:00:1a.7
PCI: Sharing IRQ 9 with 0000:00:1c.4
PCI: Sharing IRQ 9 with 0000:02:00.0
PCI: Setting latency timer of device 0000:00:1c.0 to 64
PCI: Found IRQ 9 for device 0000:00:1c.1
PCI: Sharing IRQ 9 with 0000:00:19.0
PCI: Setting latency timer of device 0000:00:1c.1 to 64
PCI: Enabling device 0000:00:1c.2 (0000 -> 0002)
PCI: Found IRQ 10 for device 0000:00:1c.2
PCI: Sharing IRQ 10 with 0000:00:1a.0
PCI: Sharing IRQ 10 with 0000:00:1d.2
PCI: Sharing IRQ 10 with 0000:00:1f.3
PCI: Setting latency timer of device 0000:00:1c.2 to 64
PCI: Enabling device 0000:00:1c.3 (0000 -> 0002)
PCI: Found IRQ 11 for device 0000:00:1c.3
PCI: Sharing IRQ 11 with 0000:00:1d.1
PCI: Sharing IRQ 11 with 0000:06:03.0
PCI: Setting latency timer of device 0000:00:1c.3 to 64
PCI: Enabling device 0000:00:1c.4 (0000 -> 0002)
PCI: Found IRQ 9 for device 0000:00:1c.4
PCI: Sharing IRQ 9 with 0000:00:1a.2
PCI: Sharing IRQ 9 with 0000:00:1a.7
PCI: Sharing IRQ 9 with 0000:00:1c.0
PCI: Sharing IRQ 9 with 0000:02:00.0
PCI: Setting latency timer of device 0000:00:1c.4 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
Time: tsc clocksource has been installed.
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
checking if image is initramfs... it is
Freeing initrd memory: 5328k freed
audit: initializing netlink socket (disabled)
audit(1193207194.630:1): initialized
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Boot video device is 0000:00:02.0
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.0:pcie00]
Allocate Port Service[0000:00:1c.0:pcie02]
PCI: Setting latency timer of device 0000:00:1c.1 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.1:pcie00]
Allocate Port Service[0000:00:1c.1:pcie02]
PCI: Setting latency timer of device 0000:00:1c.2 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.2:pcie00]
Allocate Port Service[0000:00:1c.2:pcie02]
PCI: Setting latency timer of device 0000:00:1c.3 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.3:pcie00]
Allocate Port Service[0000:00:1c.3:pcie02]
PCI: Setting latency timer of device 0000:00:1c.4 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.4:pcie00]
Allocate Port Service[0000:00:1c.4:pcie02]
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI No-Shortcut mode
Freeing unused kernel memory: 220k freed
input: AT Translated Set 2 keyboard as /class/input/input0
thermal: Unknown symbol acpi_processor_set_thermal_limit
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
USB Universal Host Controller Interface driver v3.0
PCI: Found IRQ 10 for device 0000:00:1a.0
PCI: Sharing IRQ 10 with 0000:00:1d.2
PCI: Sharing IRQ 10 with 0000:00:1f.3
PCI: Setting latency timer of device 0000:00:1a.0 to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1a.0: irq 10, io base 0x000020c0
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
PCI: Found IRQ 11 for device 0000:00:1a.1
PCI: Sharing IRQ 11 with 0000:00:1f.2
PCI: Sharing IRQ 11 with 0000:00:1f.5
PCI: Setting latency timer of device 0000:00:1a.1 to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1a.1: irq 11, io base 0x000020a0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
PCI: Found IRQ 9 for device 0000:00:1a.2
PCI: Sharing IRQ 9 with 0000:00:1a.7
PCI: Sharing IRQ 9 with 0000:02:00.0
PCI: Setting latency timer of device 0000:00:1a.2 to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.2: irq 9, io base 0x00002080
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
PCI: Found IRQ 11 for device 0000:00:1d.0
PCI: Sharing IRQ 11 with 0000:00:1d.7
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.0: irq 11, io base 0x00002060
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
PCI: Found IRQ 11 for device 0000:00:1d.1
PCI: Sharing IRQ 11 with 0000:06:03.0
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.1: irq 11, io base 0x00002040
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
PCI: Found IRQ 10 for device 0000:00:1d.2
PCI: Sharing IRQ 10 with 0000:00:1a.0
PCI: Sharing IRQ 10 with 0000:00:1f.3
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.2: irq 10, io base 0x00002020
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
PCI: Found IRQ 9 for device 0000:00:1a.7
PCI: Sharing IRQ 9 with 0000:00:1a.2
PCI: Sharing IRQ 9 with 0000:02:00.0
PCI: Setting latency timer of device 0000:00:1a.7 to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 7
ehci_hcd 0000:00:1a.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1a.7
ehci_hcd 0000:00:1a.7: irq 9, io mem 0xe03a5400
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 6 ports detected
PCI: Found IRQ 11 for device 0000:00:1d.7
PCI: Sharing IRQ 11 with 0000:00:1d.0
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 8
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 11, io mem 0xe03a5000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb8: configuration #1 chosen from 1 choice
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 6 ports detected
SCSI subsystem initialized
libata version 2.21 loaded.
PCI: Found IRQ 9 for device 0000:02:00.0
PCI: Sharing IRQ 9 with 0000:00:1a.2
PCI: Sharing IRQ 9 with 0000:00:1a.7
PCI: Setting latency timer of device 0000:02:00.0 to 64
scsi0 : pata_marvell
scsi1 : pata_marvell
ata1: PATA max UDMA/100 cmd 0x00011018 ctl 0x00011026 bmdma 0x00011000 irq 9
ata2: DUMMY
BAR5:00:00 01:7F 02:22 03:CA 04:00 05:00 06:00 07:00 08:00 09:00 0A:00 0B:00 0C:01 0D:00 0E:00 0F:00
ata_piix 0000:00:1f.2: version 2.12
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
PCI: Found IRQ 11 for device 0000:00:1f.2
PCI: Sharing IRQ 11 with 0000:00:1a.1
PCI: Sharing IRQ 11 with 0000:00:1f.5
PCI: Setting latency timer of device 0000:00:1f.2 to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00012130 irq 14
ata4: SATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x00012138 irq 15
ata3.00: ATA-6: ST380817AS, 3.42, max UDMA/133
ata3.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA ST380817AS 3.42 PQ: 0 ANSI: 5
ata_piix 0000:00:1f.5: MAP [ P0 P2 P1 P3 ]
PCI: Found IRQ 11 for device 0000:00:1f.5
PCI: Sharing IRQ 11 with 0000:00:1a.1
PCI: Sharing IRQ 11 with 0000:00:1f.2
PCI: Setting latency timer of device 0000:00:1f.5 to 64
scsi4 : ata_piix
scsi5 : ata_piix
ata5: SATA max UDMA/133 cmd 0x00012148 ctl 0x0001216e bmdma 0x00012110 irq 11
ata6: SATA max UDMA/133 cmd 0x00012140 ctl 0x0001216a bmdma 0x00012118 irq 11
PCI: Found IRQ 11 for device 0000:06:03.0
PCI: Sharing IRQ 11 with 0000:00:1d.1
firewire_ohci: Added fw-ohci device 0000:06:03.0, OHCI version 1.10
firewire_core: created new fw device fw0 (0 config rom retries, S400)
sd 2:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3
sd 2:0:0:0: [sda] Attached SCSI disk
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
PCI: Found IRQ 10 for device 0000:00:1b.0
PCI: Setting latency timer of device 0000:00:1b.0 to 64
hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
PCI: Found IRQ 10 for device 0000:00:1f.3
PCI: Sharing IRQ 10 with 0000:00:1a.0
PCI: Sharing IRQ 10 with 0000:00:1d.2
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
iTCO_wdt: Found a ICH9DH TCO device (Version=2, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
Linux agpgart interface v0.102
agpgart: Detected an Intel G33 Chipset.
agpgart: Detected 6140K stolen memory.
agpgart: AGP aperture is 256M @ 0xd0000000
Adding 7815612k swap on /dev/sda2. Priority:-1 extents:1 across:7815612k
EXT3 FS on sda1, internal journal
loop: module loaded
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Bridge firewalling registered
br0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
br0: no IPv6 routers present