Linux version 2.6.22-suspend2 (root@jupiter) (gcc version 4.1.2 (Gentoo 4.1.2 p1.0.1)) #3 SMP PREEMPT Mon Sep 10 11:20:55 UTC 2007BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007f7d0000 (usable) BIOS-e820: 000000007f7d0000 - 000000007f7de000 (ACPI data) BIOS-e820: 000000007f7de000 - 000000007f800000 (ACPI NVS) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)1143MB HIGHMEM available.896MB LOWMEM available.found SMP MP-table at 000ff780Entering add_active_range(0, 0, 522192) 0 entries of 256 usedZone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 229376 HighMem 229376 -> 522192early_node_map[1] active PFN ranges 0: 0 -> 522192On node 0 totalpages: 522192 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 1760 pages used for memmap Normal zone: 223520 pages, LIFO batch:31 HighMem zone: 2287 pages used for memmap HighMem zone: 290529 pages, LIFO batch:31DMI present.ACPI: RSDP 000F9120, 0014 (r0 ACPIAM)ACPI: RSDT 7F7D0000, 0034 (r1 A M I OEMRSDT 3000615 MSFT 97)ACPI: FACP 7F7D0200, 0084 (r2 A M I OEMFACP 3000615 MSFT 97)ACPI: DSDT 7F7D0430, 467D (r1 M31EI M31EI000 0 INTL 2002026)ACPI: FACS 7F7DE000, 0040ACPI: APIC 7F7D0390, 005C (r1 A M I OEMAPIC 3000615 MSFT 97)ACPI: MCFG 7F7D03F0, 003C (r1 A M I OEMMCFG 3000615 MSFT 97)ACPI: OEMB 7F7DE040, 0114 (r1 A M I AMI_OEM 3000615 MSFT 97)ACPI: PM-Timer IO Port: 0x808ACPI: Local APIC address 0xfee00000ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)Processor #0 6:14 APIC version 20ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)Processor #1 6:14 APIC version 20ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)ACPI: IRQ0 used by override.ACPI: IRQ2 used by override.ACPI: IRQ9 used by override.Enabling APIC mode: Flat. Using 1 I/O APICsUsing ACPI (MADT) for SMP configuration informationAllocating PCI resources starting at 80000000 (gap: 7f800000:7f600000)Built 1 zonelists. Total pages: 518113Kernel command line: root=/dev/ram0 ramdisk=8192 init=/linuxrc real_root=/dev/hda6 resume2=swap:/dev/hda5 vga=792 splash=silent,theme:default CONSOLE=/dev/tty1 quiet udevmapped APIC to ffffd000 (fee00000)mapped IOAPIC to ffffc000 (fec00000)Enabling fast FPU save and restore... done.Enabling unmasked SIMD FPU exception support... done.Initializing CPU#0CPU 0 irqstacks, hard=c059c000 soft=c057c000PID hash table entries: 4096 (order: 12, 16384 bytes)Detected 2000.259 MHz processor.Console: colour VGA+ 80x25Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)Memory: 2061948k/2088768k available (3441k kernel code, 25600k reserved, 853k data, 256k init, 1171264k highmem)virtual kernel memory layout: fixmap : 0xffe17000 - 0xfffff000 (1952 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) .init : 0xc0537000 - 0xc0577000 ( 256 kB) .data : 0xc045c540 - 0xc0531c04 ( 853 kB) .text : 0xc0100000 - 0xc045c540 (3441 kB)Checking if this processor honours the WP bit even in supervisor mode... Ok.Calibrating delay using timer specific routine.. 4002.19 BogoMIPS (lpj=2001095)Mount-cache hash table entries: 512CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000monitor/mwait feature present.using mwait in idle threads.CPU: L1 I cache: 32K, L1 D cache: 32KCPU: L2 cache: 2048KCPU: Physical Processor ID: 0CPU: Processor Core ID: 0CPU: After all inits, caps: bfe9fbff 00100000 00000000 00002940 0000c1a9 00000000 00000000Intel machine check architecture supported.Intel machine check reporting enabled on CPU#0.Compat vDSO mapped to ffffe000.Checking 'hlt' instruction... OK.SMP alternatives: switching to UP codeACPI: Core revision 20070126CPU0: Intel Genuine Intel(R) CPU T2500 @ 2.00GHz stepping 08SMP alternatives: switching to SMP codeBooting processor 1/1 eip 3000CPU 1 irqstacks, hard=c059d000 soft=c057d000Initializing CPU#1Calibrating delay using timer specific routine.. 3999.74 BogoMIPS (lpj=1999874)CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000monitor/mwait feature present.CPU: L1 I cache: 32K, L1 D cache: 32KCPU: L2 cache: 2048KCPU: Physical Processor ID: 0CPU: Processor Core ID: 1CPU: After all inits, caps: bfe9fbff 00100000 00000000 00002940 0000c1a9 00000000 00000000Intel machine check architecture supported.Intel machine check reporting enabled on CPU#1.CPU1: Intel Genuine Intel(R) CPU T2500 @ 2.00GHz stepping 08Total of 2 processors activated (8001.93 BogoMIPS).ENABLING IO-APIC IRQs..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1checking TSC synchronization [CPU#0 -> CPU#1]: passed.Brought up 2 CPUsmigration_cost=53Device driver platform lacks bus and class support for being resumed.NET: Registered protocol family 16No dock devices found.ACPI: bus type pci registeredPCI: BIOS Bug: MCFG area at e0000000 is not E820-reservedPCI: Not using MMCONFIG.PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=4PCI: Using configuration type 1Setting up standard PCI resourcesACPI: Interpreter enabledACPI: (supports S0 S3 S4 S5)ACPI: Using IOAPIC for interrupt routingACPI: PCI Root Bridge [PCI0] (0000:00)PCI: Probing PCI hardware (bus 00)Device driver pci0000:00 lacks bus and class support for being resumed.PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCOPCI quirk: region 0480-04bf claimed by ICH6 GPIOPCI: Transparent bridge - 0000:00:1e.0ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15)ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)Linux Plug and Play Support v0.97 (c) Adam Belaypnp: PnP ACPI initDevice driver pnp0 lacks bus and class support for being resumed.ACPI: bus type pnp registeredpnp: PnP ACPI: found 12 devicesACPI: ACPI bus type pnp unregisteredSCSI subsystem initializedlibata version 2.21 loaded.PCI: Using ACPI for IRQ routingPCI: If a device doesn't work, try "pci=routeirq". If it helps, post a reportpnp: 00:01: iomem range 0xfed13000-0xfed19fff has been reservedpnp: 00:08: iomem range 0xfed1c000-0xfed1ffff has been reservedpnp: 00:08: iomem range 0xfed20000-0xfed8ffff has been reservedpnp: 00:08: iomem range 0xffb00000-0xffbfffff has been reservedpnp: 00:08: iomem range 0xfff80000-0xffffffff could not be reservedpnp: 00:09: iomem range 0xfec00000-0xfec00fff has been reservedpnp: 00:09: iomem range 0xfee00000-0xfee00fff could not be reservedpnp: 00:0a: iomem range 0xe0000000-0xefffffff has been reservedpnp: 00:0b: iomem range 0x0-0x9ffff could not be reservedpnp: 00:0b: iomem range 0xc0000-0xcffff could not be reservedpnp: 00:0b: iomem range 0xe0000-0xfffff could not be reservedpnp: 00:0b: iomem range 0x100000-0x7f7fffff could not be reservedTime: tsc clocksource has been installed.PCI: Bridge: 0000:00:1c.0 IO window: e000-efff MEM window: feb00000-febfffff PREFETCH window: disabled.PCI: Bridge: 0000:00:1c.2 IO window: disabled. MEM window: fea00000-feafffff PREFETCH window: disabled.PCI: Bus 2, cardbus bridge: 0000:01:04.0 IO window: 0000d000-0000d0ff IO window: 0000d400-0000d4ff PREFETCH window: 84000000-87ffffff MEM window: 88000000-8bffffffPCI: Bridge: 0000:00:1e.0 IO window: d000-dfff MEM window: fe100000-fe9fffff PREFETCH window: fc000000-fdffffffACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16PCI: Setting latency timer of device 0000:00:1c.0 to 64ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 17PCI: Setting latency timer of device 0000:00:1c.2 to 64PCI: Setting latency timer of device 0000:00:1e.0 to 64ACPI: PCI Interrupt 0000:01:04.0[A] -> GSI 16 (level, low) -> IRQ 16NET: Registered protocol family 2IP route cache hash table entries: 32768 (order: 5, 131072 bytes)TCP established hash table entries: 131072 (order: 9, 2097152 bytes)TCP bind hash table entries: 65536 (order: 7, 786432 bytes)TCP: Hash tables configured (established 131072 bind 65536)TCP reno registeredchecking if image is initramfs... it isMachine check exception polling timer started.audit: initializing netlink socket (disabled)audit(1190548939.457:1): initializedhighmem bounce pool size: 64 pagessquashfs: version 3.2-r2 (2007/01/15) Phillip LougherSGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabledSGI XFS Quota Management subsystemOCFS2 1.3.3OCFS2 Node Manager 1.3.3OCFS2 DLM 1.3.3OCFS2 DLMFS 1.3.3OCFS2 User DLM kernel interface loadedGFS2 (built Sep 10 2007 00:42:03) installedLock_Nolock (built Sep 10 2007 00:42:10) installedio scheduler noop registeredio scheduler anticipatory registered (default)io scheduler deadline registeredio scheduler cfq registeredBoot video device is 0000:00:02.0Linux agpgart interface v0.102 (c) Dave Jonesagpgart: Detected an Intel 945GM Chipset.agpgart: Detected 7932K stolen memory.agpgart: AGP aperture is 256M @ 0xd0000000vesafb: Intel Corporation, Intel(r) 82945GM Chipset Family Graphics Controller, Hardware Version 0.0 (OEM: Intel(r) 82945GM Chipset Family Graphics Chip Accelerated VGA BIOS)vesafb: VBE version: 3.0vesafb: VBIOS/hardware supports DDC2 transfersvesafb: monitor limits: vf = 59 Hz, hf = 47 kHz, clk = 68 MHzvesafb: scrolling: redrawConsole: switching to colour frame buffer device 160x48vesafb: framebuffer at 0xd0000000, mapped to 0xf8a00000, using 7680k, total 7872kfb0: VESA VGA frame buffer deviceACPI: AC Adapter [AC0] (on-line)ACPI: Battery Slot [BAT0] (battery present)input: Power Button (FF) as /class/input/input0ACPI: Power Button (FF) [PWRF]input: Lid Switch as /class/input/input1ACPI: Lid Switch [LID]input: Sleep Button (CM) as /class/input/input2ACPI: Sleep Button (CM) [SLPB]input: Power Button (CM) as /class/input/input3ACPI: Power Button (CM) [PWRB]ACPI Warning (tbutils-0158): Incorrect checksum in table [SSDT] - 36, should be F5 [20070126]ACPI Warning (tbutils-0158): Incorrect checksum in table [OEMB] - 47, should be 41 [20070126]ACPI: SSDT 7F7D4AB0, 0441 (r1 AMI CPU1PM 1 INTL 2002026)ACPI: CPU0 (power states: C1[C1] C2[C2])ACPI Warning (tbutils-0158): Incorrect checksum in table [SSDT] - AA, should be F0 [20070126]ACPI: SSDT 7F7D4F00, 02E9 (r1 AMI CPU2PM 1 INTL 2002026)ACPI: CPU1 (power states: C1[C1] C2[C2])Marking TSC unstable due to: possible TSC halt in C2.Time: acpi_pm clocksource has been installed.Switched to high resolution mode on CPU 1Switched to high resolution mode on CPU 0ACPI: Thermal Zone [THRM] (42 C)intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM chipsetsintelfb: Version 0.9.4ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16intelfb: Cannot reserve FB region.PCI driver intelfb lacks driver specific resume support.Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabledRAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksizeloop: module loadedACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 16 (level, low) -> IRQ 16PCI: Setting latency timer of device 0000:04:00.0 to 64sky2 0000:04:00.0: v1.14 addr 0xfebfc000 irq 16 Yukon-EC (0xb6) rev 2Device driver eth0 lacks bus and class support for being resumed.sky2 eth0: addr 00:03:0d:46:96:a4Device driver lo lacks bus and class support for being resumed.Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xxPCI driver VIA_IDE lacks driver specific resume support.PCI driver PCI_IDE lacks driver specific resume support.Probing IDE interface ide0...hda: FUJITSU MHV2100BH, ATA DISK driveDevice driver ide0 lacks bus and class support for being resumed.Probing IDE interface ide1...hdc: SONY DVD RW DW-Q520A, ATAPI CD/DVD-ROM driveDevice driver ide1 lacks bus and class support for being resumed.ide0 at 0x1f0-0x1f7,0x3f6 on irq 14ide1 at 0x170-0x177,0x376 on irq 15hda: max request size: 512KiBhda: 195371568 sectors (100030 MB) w/8192KiB Cache, CHS=16383/255/63hda: cache flushes supported hda: hda1 hda2 hda4 < hda5 hda6 hda7 hda8 hda9 >hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB CacheUniform CD-ROM driver Revision: 3.20ata_piix 0000:00:1f.2: version 2.11ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 18ata_piix 0000:00:1f.2: 0x1F0 IDE port busyata_piix 0000:00:1f.2: 0x170 IDE port busyata_piix 0000:00:1f.2: no available legacy portYenta: CardBus bridge found at 0000:01:04.0 [1584:3009]Yenta O2: res at 0x94/0xD4: 00/eaYenta O2: enabling read prefetch/write burstYenta: ISA IRQ mask 0x0cb8, PCI irq 16Socket status: 30000006pcmcia: parent PCI bridge I/O window: 0xd000 - 0xdfffpcmcia: parent PCI bridge Memory window: 0xfe100000 - 0xfe9fffffpcmcia: parent PCI bridge Memory window: 0xfc000000 - 0xfdffffffDevice driver pcmcia_socket0 lacks bus and class support for being resumed.PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12i8042.c: Detected active multiplexing controller, rev 1.0.serio: i8042 KBD port at 0x60,0x64 irq 1serio: i8042 AUX0 port at 0x60,0x64 irq 12serio: i8042 AUX1 port at 0x60,0x64 irq 12serio: i8042 AUX2 port at 0x60,0x64 irq 12serio: i8042 AUX3 port at 0x60,0x64 irq 12mice: PS/2 mouse device common for all micei2c /dev entries driverTCP cubic registeredNET: Registered protocol family 1NET: Registered protocol family 17speedstep-centrino with X86_SPEEDSTEP_CENTRINO_ACPI config is deprecated. Use X86_ACPI_CPUFREQ (acpi-cpufreq) instead.speedstep-centrino with X86_SPEEDSTEP_CENTRINO_ACPI config is deprecated. Use X86_ACPI_CPUFREQ (acpi-cpufreq) instead.Starting balanced_irqUsing IPI No-Shortcut modeSuspend v2.2.10input: AT Translated Set 2 keyboard as /class/input/input4Suspend2 Userspace Storage Manager support registered.Suspend2 Basic User Interface support registered.Suspend2 Compressor support registered.Suspend2 Block I/O support registered.Suspend2 Swap Allocator support registered.Suspend2 File Allocator support registered.Suspend2 Userspace UI support registered.drivers/rtc/hctosys.c: unable to open rtc device (rtc0)usbcore: registered new interface driver usbfsUSB driver usbfs lacks resume support.usbcore: registered new interface driver hubusbcore: registered new device driver usbACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 19PCI: Setting latency timer of device 0000:00:1d.7 to 64ehci_hcd 0000:00:1d.7: EHCI Host Controllerehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1ehci_hcd 0000:00:1d.7: debug port 1PCI: cache line size of 32 is not supported by device 0000:00:1d.7ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfe0ffc00ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004Device driver usbdev1.1_ep00 lacks bus and class support for being resumed.usb usb1: configuration #1 chosen from 1 choicehub 1-0:1.0: USB hub foundhub 1-0:1.0: 8 ports detectedDevice driver usbdev1.1_ep81 lacks bus and class support for being resumed.Initializing USB Mass Storage driver...usbcore: registered new interface driver usb-storageUSB Mass Storage support registered.USB Universal Host Controller Interface driver v3.0ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 19PCI: Setting latency timer of device 0000:00:1d.0 to 64uhci_hcd 0000:00:1d.0: UHCI Host Controlleruhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2uhci_hcd 0000:00:1d.0: irq 19, io base 0x0000c480Device driver usbdev2.1_ep00 lacks bus and class support for being resumed.usb usb2: configuration #1 chosen from 1 choicehub 2-0:1.0: USB hub foundhub 2-0:1.0: 2 ports detectedDevice driver usbdev2.1_ep81 lacks bus and class support for being resumed.ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 18PCI: Setting latency timer of device 0000:00:1d.1 to 64uhci_hcd 0000:00:1d.1: UHCI Host Controlleruhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3uhci_hcd 0000:00:1d.1: irq 18, io base 0x0000c800Device driver usbdev3.1_ep00 lacks bus and class support for being resumed.usb usb3: configuration #1 chosen from 1 choicehub 3-0:1.0: USB hub foundhub 3-0:1.0: 2 ports detectedDevice driver usbdev3.1_ep81 lacks bus and class support for being resumed.ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 17PCI: Setting latency timer of device 0000:00:1d.2 to 64uhci_hcd 0000:00:1d.2: UHCI Host Controlleruhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4uhci_hcd 0000:00:1d.2: irq 17, io base 0x0000c880Device driver usbdev4.1_ep00 lacks bus and class support for being resumed.usb usb4: configuration #1 chosen from 1 choicehub 4-0:1.0: USB hub foundhub 4-0:1.0: 2 ports detectedDevice driver usbdev4.1_ep81 lacks bus and class support for being resumed.ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16PCI: Setting latency timer of device 0000:00:1d.3 to 64uhci_hcd 0000:00:1d.3: UHCI Host Controlleruhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000cc00Device driver usbdev5.1_ep00 lacks bus and class support for being resumed.usb usb5: configuration #1 chosen from 1 choicehub 5-0:1.0: USB hub foundhub 5-0:1.0: 2 ports detectedinput: ImPS/2 Synaptics TouchPad as /class/input/input5Device driver usbdev5.1_ep81 lacks bus and class support for being resumed.ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driverusbcore: registered new interface driver hiddevUSB driver hiddev lacks resume support.usbcore: registered new interface driver usbhiddrivers/hid/usbhid/hid-core.c: v2.6:USB HID core driversl811: driver sl811-hcd, 19 May 2005ACPI: PCI Interrupt 0000:01:0a.0[A] -> GSI 18 (level, low) -> IRQ 17Device driver fw-host0 lacks bus and class support for being resumed.ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[fe1ff800-fe1fffff] Max Packet=[2048] IR/IT contexts=[4/8]JFS: nTxBlock = 8192, nTxLock = 65536Device driver 00030d4931006407 lacks bus and class support for being resumed.ieee1394: Host added: ID:BUS[0-00:1023] GUID[00030d4931006407]No storage allocator is currently active. Rechecking whether we can use one.Suspend2: SwapAllocator: Signature found.Suspend2: Resuming enabled.Suspend2: Normal swapspace found.kjournald starting. Commit interval 5 secondsEXT3-fs: mounted filesystem with ordered data mode.udev: renamed network interface eth0 to eth2Real Time Clock Driver v1.12acACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 18Device driver i2c-0 lacks bus and class support for being resumed.iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.0.0-1diwl3945: Copyright(c) 2003-2007 Intel CorporationACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 18 (level, low) -> IRQ 17PCI: Setting latency timer of device 0000:03:00.0 to 64iwl3945: Detected Intel PRO/Wireless 3945ABG Network ConnectionDevice driver 0000:03:00.0 lacks bus and class support for being resumed.ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16PCI: Setting latency timer of device 0000:00:1b.0 to 64ipw3945: Unknown symbol ieee80211_wx_get_encodeextipw3945: Unknown symbol ieee80211_wx_set_encodeipw3945: Unknown symbol ieee80211_wx_get_encodeipw3945: Unknown symbol ieee80211_txb_freeipw3945: Unknown symbol ieee80211_wx_set_encodeextipw3945: Unknown symbol ieee80211_wx_get_scanipw3945: Unknown symbol escape_essidipw3945: Unknown symbol ieee80211_freq_to_channelipw3945: Unknown symbol ieee80211_set_geoipw3945: Unknown symbol ieee80211_rxipw3945: Unknown symbol ieee80211_get_channelipw3945: Unknown symbol ieee80211_channel_to_indexipw3945: Unknown symbol ieee80211_rx_mgtipw3945: Unknown symbol ieee80211_get_geoipw3945: Unknown symbol free_ieee80211ipw3945: Unknown symbol ieee80211_tx_frameipw3945: Unknown symbol ieee80211_is_valid_channelipw3945: Unknown symbol ieee80211_get_channel_flagsipw3945: Unknown symbol alloc_ieee80211iwl3945: Channel 14 [2.4GHz] is Tx only -- skipping.iwl3945: Channel 183 [5.2GHz] is Tx only -- skipping.iwl3945: Channel 184 [5.2GHz] is Tx only -- skipping.iwl3945: Channel 185 [5.2GHz] is Tx only -- skipping.iwl3945: Channel 187 [5.2GHz] is Tx only -- skipping.iwl3945: Channel 188 [5.2GHz] is Tx only -- skipping.iwl3945: Channel 189 [5.2GHz] is Tx only -- skipping.iwl3945: Channel 192 [5.2GHz] is Tx only -- skipping.iwl3945: Channel 196 [5.2GHz] is Tx only -- skipping.iwl3945: Channel 7 [5.2GHz] is Tx only -- skipping.iwl3945: Channel 8 [5.2GHz] is Tx only -- skipping.iwl3945: Channel 11 [5.2GHz] is Tx only -- skipping.iwl3945: Channel 12 [5.2GHz] is Tx only -- skipping.iwl3945: Channel 16 [5.2GHz] is Tx only -- skipping.iwl3945: Channel 145 [5.2GHz] is Tx only -- skipping.iwl3945: Channel 149 [5.2GHz] is Tx only -- skipping.iwl3945: Channel 153 [5.2GHz] is Tx only -- skipping.iwl3945: Channel 157 [5.2GHz] is Tx only -- skipping.iwl3945: Channel 161 [5.2GHz] is Tx only -- skipping.iwl3945: Channel 165 [5.2GHz] is Tx only -- skipping.iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channelsDevice driver phy0 lacks bus and class support for being resumed.Device driver wmaster0 lacks bus and class support for being resumed.wmaster0: Selected rate control algorithm 'iwl-3945-rs'Device driver wlan0 lacks bus and class support for being resumed.udev: renamed network interface wlan0 to wlan1EXT3 FS on hda6, internal journalReiserFS: hda9: found reiserfs format "3.6" with standard journalReiserFS: hda9: using ordered data modeReiserFS: hda9: journal params: device hda9, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30ReiserFS: hda9: checking transaction log (hda9)ReiserFS: hda9: Using r5 hash to sort namesAdding 1574328k swap on /dev/hda5. Priority:-1 extents:1 across:1574328kHW CONFIG: channel=1 freq=2412 phymode=3sky2 eth2: enabling interfacesky2 eth2: ram buffer 48KNET: Registered protocol family 10lo: Disabled Privacy ExtensionsADDRCONF(NETDEV_UP): eth2: link is not readyADDRCONF(NETDEV_UP): wlan1: link is not readyHW CONFIG: channel=1 freq=2412 phymode=3[drm] Initialized drm 1.1.0 20060810[drm] Initialized i915 1.6.0 20060119 on minor 0HW CONFIG: channel=1 freq=2412 phymode=3kjournald starting. Commit interval 5 secondsEXT3-fs warning: maximal mount count reached, running e2fsck is recommendedEXT3 FS on hda8, internal journalEXT3-fs: mounted filesystem with ordered data mode.kjournald starting. Commit interval 5 secondsEXT3-fs warning: maximal mount count reached, running e2fsck is recommendedEXT3 FS on hda7, internal journalEXT3-fs: mounted filesystem with ordered data mode.fuse init (API version 7.8)fuse distribution version: 2.6.4HW CONFIG: channel=1 freq=2412 phymode=3HW CONFIG: channel=1 freq=2412 phymode=3iwl3945: REPLY_ADD_STA failedwlan1: Initial auth_alg=0wlan1: authenticate with AP 00:14:7f:26:8b:d8wlan1: RX authentication from 00:14:7f:26:8b:d8 (alg=0 transaction=2 status=0)wlan1: authenticatedwlan1: associate with AP 00:14:7f:26:8b:d8wlan1: RX AssocResp from 00:14:7f:26:8b:d8 (capab=0x411 status=0 aid=4)wlan1: associatedwmaster0: Added STA 00:14:7f:26:8b:d8wlan1: WMM queue=2 aci=0 acm=0 aifs=3 cWmin=15 cWmax=1023 burst=0wlan1: WMM queue=3 aci=1 acm=0 aifs=7 cWmin=15 cWmax=1023 burst=0wlan1: WMM queue=1 aci=2 acm=0 aifs=2 cWmin=7 cWmax=15 burst=30wlan1: WMM queue=0 aci=3 acm=0 aifs=2 cWmin=3 cWmax=7 burst=15ADDRCONF(NETDEV_CHANGE): wlan1: link becomes readywlan1: duplicate address detected!wlan1: duplicate address detected!usb 2-2: new low speed USB device using uhci_hcd and address 2Device driver usbdev2.2_ep00 lacks bus and class support for being resumed.usb 2-2: configuration #1 chosen from 1 choiceinput: Logitech USB Receiver as /class/input/input6input: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-2Device driver usbdev2.2_ep81 lacks bus and class support for being resumed.input: Logitech USB Receiver as /class/input/input7input,hiddev96: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-2Device driver usbdev2.2_ep82 lacks bus and class support for being resumed.HW CONFIG: channel=1 freq=2412 phymode=3iwl3945: REPLY_ADD_STA failedHW CONFIG: channel=1 freq=2412 phymode=3iwl3945: REPLY_ADD_STA failedHW CONFIG: channel=1 freq=2412 phymode=3iwl3945: REPLY_ADD_STA failedHW CONFIG: channel=1 freq=2412 phymode=3iwl3945: REPLY_ADD_STA failedHW CONFIG: channel=1 freq=2412 phymode=3iwl3945: REPLY_ADD_STA failedHW CONFIG: channel=1 freq=2412 phymode=3iwl3945: REPLY_ADD_STA failedHW CONFIG: channel=1 freq=2412 phymode=3iwl3945: REPLY_ADD_STA failedHW CONFIG: channel=1 freq=2412 phymode=3iwl3945: REPLY_ADD_STA failedHW CONFIG: channel=1 freq=2412 phymode=3iwl3945: REPLY_ADD_STA failedHW CONFIG: channel=1 freq=2412 phymode=3iwl3945: REPLY_ADD_STA failedHW CONFIG: channel=1 freq=2412 phymode=3iwl3945: REPLY_ADD_STA failedHW CONFIG: channel=1 freq=2412 phymode=3iwl3945: REPLY_ADD_STA failedHW CONFIG: channel=1 freq=2412 phymode=3iwl3945: REPLY_ADD_STA failedHW CONFIG: channel=1 freq=2412 phymode=3iwl3945: REPLY_ADD_STA failedHW CONFIG: channel=1 freq=2412 phymode=3iwl3945: REPLY_ADD_STA failedHW CONFIG: channel=1 freq=2412 phymode=3iwl3945: REPLY_ADD_STA failedHW CONFIG: channel=1 freq=2412 phymode=3iwl3945: REPLY_ADD_STA failedHW CONFIG: channel=1 freq=2412 phymode=3iwl3945: REPLY_ADD_STA failedHW CONFIG: channel=1 freq=2412 phymode=3iwl3945: REPLY_ADD_STA failedHW CONFIG: channel=1 freq=2412 phymode=3iwl3945: REPLY_ADD_STA failedClocksource tsc unstable (delta = 193638295 ns)HW CONFIG: channel=1 freq=2412 phymode=3iwl3945: REPLY_ADD_STA failedHW CONFIG: channel=1 freq=2412 phymode=3iwl3945: REPLY_ADD_STA failedHW CONFIG: channel=1 freq=2412 phymode=3iwl3945: REPLY_ADD_STA failedHW CONFIG: channel=1 freq=2412 phymode=3iwl3945: REPLY_ADD_STA failedHW CONFIG: channel=1 freq=2412 phymode=3iwl3945: REPLY_ADD_STA failedHW CONFIG: channel=1 freq=2412 phymode=3iwl3945: REPLY_ADD_STA failedHW CONFIG: channel=1 freq=2412 phymode=3iwl3945: REPLY_ADD_STA failedHW CONFIG: channel=1 freq=2412 phymode=3iwl3945: REPLY_ADD_STA failedHW CONFIG: channel=1 freq=2412 phymode=3iwl3945: REPLY_ADD_STA failedHW CONFIG: channel=1 freq=2412 phymode=3iwl3945: REPLY_ADD_STA failedHW CONFIG: channel=1 freq=2412 phymode=3iwl3945: REPLY_ADD_STA failedHW CONFIG: channel=1 freq=2412 phymode=3iwl3945: REPLY_ADD_STA failedHW CONFIG: channel=1 freq=2412 phymode=3iwl3945: REPLY_ADD_STA failedHW CONFIG: channel=1 freq=2412 phymode=3iwl3945: REPLY_ADD_STA failedHW CONFIG: channel=1 freq=2412 phymode=3iwl3945: REPLY_ADD_STA failedHW CONFIG: channel=1 freq=2412 phymode=3iwl3945: REPLY_ADD_STA failedHW CONFIG: channel=1 freq=2412 phymode=3iwl3945: REPLY_ADD_STA failedHW CONFIG: channel=1 freq=2412 phymode=3iwl3945: REPLY_ADD_STA failedHW CONFIG: channel=1 freq=2412 phymode=3iwl3945: REPLY_ADD_STA failedHW CONFIG: channel=1 freq=2412 phymode=3iwl3945: REPLY_ADD_STA failedHW CONFIG: channel=1 freq=2412 phymode=3iwl3945: REPLY_ADD_STA failedHW CONFIG: channel=1 freq=2412 phymode=3iwl3945: REPLY_ADD_STA failedHW CONFIG: channel=1 freq=2412 phymode=3iwl3945: REPLY_ADD_STA failedHW CONFIG: channel=1 freq=2412 phymode=3iwl3945: REPLY_ADD_STA failedHW CONFIG: channel=1 freq=2412 phymode=3iwl3945: REPLY_ADD_STA failed