rendered paste bodySep 22 10:58:16 tony Linux version 2.6.22-ARCH (root@workstation64) (gcc version 4.2.1) #1 SMP PREEMPT Fri Aug 31 19:54:09 UTC 2007
Sep 22 10:58:16 tony BIOS-provided physical RAM map:
Sep 22 10:58:16 tony BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
Sep 22 10:58:16 tony BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
Sep 22 10:58:16 tony BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
Sep 22 10:58:16 tony BIOS-e820: 0000000000100000 - 000000007e790000 (usable)
Sep 22 10:58:16 tony BIOS-e820: 000000007e790000 - 000000007e79e000 (ACPI data)
Sep 22 10:58:16 tony BIOS-e820: 000000007e79e000 - 000000007e7e0000 (ACPI NVS)
Sep 22 10:58:16 tony BIOS-e820: 000000007e7e0000 - 000000007e800000 (reserved)
Sep 22 10:58:16 tony BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
Sep 22 10:58:16 tony BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
Sep 22 10:58:16 tony 1127MB HIGHMEM available.
Sep 22 10:58:16 tony 896MB LOWMEM available.
Sep 22 10:58:16 tony found SMP MP-table at 000ff780
Sep 22 10:58:16 tony Zone PFN ranges:
Sep 22 10:58:16 tony DMA 0 -> 4096
Sep 22 10:58:16 tony Normal 4096 -> 229376
Sep 22 10:58:16 tony HighMem 229376 -> 518032
Sep 22 10:58:16 tony early_node_map[1] active PFN ranges
Sep 22 10:58:16 tony 0: 0 -> 518032
Sep 22 10:58:16 tony DMI 2.4 present.
Sep 22 10:58:16 tony ACPI: RSDP 000FAD70, 0014 (r0 ACPIAM)
Sep 22 10:58:16 tony ACPI: RSDT 7E790000, 0048 (r1 MSTEST TESTONLY 6000711 MSFT 97)
Sep 22 10:58:16 tony ACPI: FACP 7E790200, 0084 (r2 MSTEST OEMFACP 6000711 MSFT 97)
Sep 22 10:58:16 tony ACPI: DSDT 7E7905C0, 9C85 (r1 A0579 A0579000 0 INTL 20060113)
Sep 22 10:58:16 tony ACPI: FACS 7E79E000, 0040
Sep 22 10:58:16 tony ACPI: APIC 7E790390, 006C (r1 MSTEST OEMAPIC 6000711 MSFT 97)
Sep 22 10:58:16 tony ACPI: MCFG 7E790400, 003C (r1 MSTEST OEMMCFG 6000711 MSFT 97)
Sep 22 10:58:16 tony ACPI: OEMB 7E79E040, 007B (r1 MSTEST AMI_OEM 6000711 MSFT 97)
Sep 22 10:58:16 tony ACPI: HPET 7E79A250, 0038 (r1 MSTEST OEMHPET 6000711 MSFT 97)
Sep 22 10:58:16 tony ACPI: ASF! 7E79A288, 0099 (r32 LEGEND I865PASF 1 INTL 20060113)
Sep 22 10:58:16 tony ACPI: GSCI 7E79E0C0, 2024 (r1 MSTEST GMCHSCI 6000711 MSFT 97)
Sep 22 10:58:16 tony ACPI: SSDT 7E7A00F0, 01BF (r1 AMI CPU1PM 1 INTL 20060113)
Sep 22 10:58:16 tony ACPI: SSDT 7E7A02B0, 0133 (r1 AMI CPU2PM 1 INTL 20060113)
Sep 22 10:58:16 tony ACPI: PM-Timer IO Port: 0x808
Sep 22 10:58:16 tony ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Sep 22 10:58:16 tony Processor #0 6:15 APIC version 20
Sep 22 10:58:16 tony ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Sep 22 10:58:16 tony Processor #1 6:15 APIC version 20
Sep 22 10:58:16 tony ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
Sep 22 10:58:16 tony ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
Sep 22 10:58:16 tony ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
Sep 22 10:58:16 tony IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
Sep 22 10:58:16 tony ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Sep 22 10:58:16 tony ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Sep 22 10:58:16 tony Enabling APIC mode: Flat. Using 1 I/O APICs
Sep 22 10:58:16 tony ACPI: HPET id: 0x8086a202 base: 0xfed00000
Sep 22 10:58:16 tony Using ACPI (MADT) for SMP configuration information
Sep 22 10:58:16 tony Allocating PCI resources starting at 80000000 (gap: 7e800000:80600000)
Sep 22 10:58:16 tony Built 1 zonelists. Total pages: 513985
Sep 22 10:58:16 tony Kernel command line: root=/dev/sda6 ro
Sep 22 10:58:16 tony Enabling fast FPU save and restore... done.
Sep 22 10:58:16 tony Enabling unmasked SIMD FPU exception support... done.
Sep 22 10:58:16 tony Initializing CPU#0
Sep 22 10:58:16 tony PID hash table entries: 4096 (order: 12, 16384 bytes)
Sep 22 10:58:16 tony Detected 2400.082 MHz processor.
Sep 22 10:58:16 tony Console: colour VGA+ 80x25
Sep 22 10:58:16 tony Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Sep 22 10:58:16 tony Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Sep 22 10:58:16 tony Memory: 2048444k/2072128k available (2393k kernel code, 22492k reserved, 783k data, 304k init, 1154624k highmem)
Sep 22 10:58:16 tony virtual kernel memory layout:
Sep 22 10:58:16 tony fixmap : 0xfff82000 - 0xfffff000 ( 500 kB)
Sep 22 10:58:16 tony pkmap : 0xff800000 - 0xffc00000 (4096 kB)
Sep 22 10:58:16 tony vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
Sep 22 10:58:16 tony lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
Sep 22 10:58:16 tony .init : 0xc0421000 - 0xc046d000 ( 304 kB)
Sep 22 10:58:16 tony .data : 0xc035641f - 0xc041a1bc ( 783 kB)
Sep 22 10:58:16 tony .text : 0xc0100000 - 0xc035641f (2393 kB)
Sep 22 10:58:16 tony Checking if this processor honours the WP bit even in supervisor mode... Ok.
Sep 22 10:58:16 tony Calibrating delay using timer specific routine.. 4804.81 BogoMIPS (lpj=8004502)
Sep 22 10:58:16 tony Security Framework v1.0.0 initialized
Sep 22 10:58:16 tony Mount-cache hash table entries: 512
Sep 22 10:58:16 tony monitor/mwait feature present.
Sep 22 10:58:16 tony using mwait in idle threads.
Sep 22 10:58:16 tony CPU: L1 I cache: 32K, L1 D cache: 32K
Sep 22 10:58:16 tony CPU: L2 cache: 4096K
Sep 22 10:58:16 tony CPU: Physical Processor ID: 0
Sep 22 10:58:16 tony CPU: Processor Core ID: 0
Sep 22 10:58:16 tony Intel machine check architecture supported.
Sep 22 10:58:16 tony Intel machine check reporting enabled on CPU#0.
Sep 22 10:58:16 tony Compat vDSO mapped to ffffe000.
Sep 22 10:58:16 tony Checking 'hlt' instruction... OK.
Sep 22 10:58:16 tony SMP alternatives: switching to UP code
Sep 22 10:58:16 tony Early unpacking initramfs... done
Sep 22 10:58:16 tony ACPI: Core revision 20070126
Sep 22 10:58:16 tony ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
Sep 22 10:58:16 tony CPU0: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz stepping 06
Sep 22 10:58:16 tony SMP alternatives: switching to SMP code
Sep 22 10:58:16 tony Booting processor 1/1 eip 3000
Sep 22 10:58:16 tony Initializing CPU#1
Sep 22 10:58:16 tony Calibrating delay using timer specific routine.. 4801.01 BogoMIPS (lpj=8000023)
Sep 22 10:58:16 tony monitor/mwait feature present.
Sep 22 10:58:16 tony CPU: L1 I cache: 32K, L1 D cache: 32K
Sep 22 10:58:16 tony CPU: L2 cache: 4096K
Sep 22 10:58:16 tony CPU: Physical Processor ID: 0
Sep 22 10:58:16 tony CPU: Processor Core ID: 1
Sep 22 10:58:16 tony Intel machine check architecture supported.
Sep 22 10:58:16 tony Intel machine check reporting enabled on CPU#1.
Sep 22 10:58:16 tony CPU1: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz stepping 06
Sep 22 10:58:16 tony Total of 2 processors activated (9606.82 BogoMIPS).
Sep 22 10:58:16 tony ENABLING IO-APIC IRQs
Sep 22 10:58:16 tony ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
Sep 22 10:58:16 tony checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Sep 22 10:58:16 tony Brought up 2 CPUs
Sep 22 10:58:16 tony migration_cost=19
Sep 22 10:58:16 tony Booting paravirtualized kernel on bare hardware
Sep 22 10:58:16 tony NET: Registered protocol family 16
Sep 22 10:58:16 tony ACPI: bus type pci registered
Sep 22 10:58:16 tony PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=4
Sep 22 10:58:16 tony PCI: Using configuration type 1
Sep 22 10:58:16 tony Setting up standard PCI resources
Sep 22 10:58:16 tony ACPI: Interpreter enabled
Sep 22 10:58:16 tony ACPI: (supports S0 S1 S3 S4 S5)
Sep 22 10:58:16 tony ACPI: Using IOAPIC for interrupt routing
Sep 22 10:58:16 tony ACPI: PCI Root Bridge [PCI0] (0000:00)
Sep 22 10:58:16 tony PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
Sep 22 10:58:16 tony PCI quirk: region 0480-04bf claimed by ICH6 GPIO
Sep 22 10:58:16 tony PCI: Transparent bridge - 0000:00:1e.0
Sep 22 10:58:16 tony ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
Sep 22 10:58:16 tony ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
Sep 22 10:58:16 tony ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
Sep 22 10:58:16 tony ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 *15)
Sep 22 10:58:16 tony ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Sep 22 10:58:16 tony ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 *14 15)
Sep 22 10:58:16 tony ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15)
Sep 22 10:58:16 tony ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
Sep 22 10:58:16 tony Linux Plug and Play Support v0.97 (c) Adam Belay
Sep 22 10:58:16 tony pnp: PnP ACPI init
Sep 22 10:58:16 tony ACPI: bus type pnp registered
Sep 22 10:58:16 tony pnp: PnP ACPI: found 15 devices
Sep 22 10:58:16 tony ACPI: ACPI bus type pnp unregistered
Sep 22 10:58:16 tony SCSI subsystem initialized
Sep 22 10:58:16 tony PCI: Using ACPI for IRQ routing
Sep 22 10:58:16 tony PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
Sep 22 10:58:16 tony NetLabel: Initializing
Sep 22 10:58:16 tony NetLabel: domain hash size = 128
Sep 22 10:58:16 tony NetLabel: protocols = UNLABELED CIPSOv4
Sep 22 10:58:16 tony NetLabel: unlabeled traffic allowed by default
Sep 22 10:58:16 tony ACPI: RTC can wake from S4
Sep 22 10:58:16 tony pnp: 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
Sep 22 10:58:16 tony pnp: 00:08: ioport range 0x290-0x297 has been reserved
Sep 22 10:58:16 tony pnp: 00:09: iomem range 0xfed1c000-0xfed1ffff has been reserved
Sep 22 10:58:16 tony pnp: 00:09: iomem range 0xfed20000-0xfed8ffff has been reserved
Sep 22 10:58:16 tony pnp: 00:09: iomem range 0xff9fa000-0xff9fafff has been reserved
Sep 22 10:58:16 tony pnp: 00:09: iomem range 0xfff00000-0xfffffffe could not be reserved
Sep 22 10:58:16 tony pnp: 00:0b: iomem range 0xfec00000-0xfec00fff has been reserved
Sep 22 10:58:16 tony pnp: 00:0b: iomem range 0xfee00000-0xfee00fff could not be reserved
Sep 22 10:58:16 tony pnp: 00:0d: iomem range 0xe0000000-0xefffffff has been reserved
Sep 22 10:58:16 tony pnp: 00:0e: iomem range 0x0-0x9ffff could not be reserved
Sep 22 10:58:16 tony pnp: 00:0e: iomem range 0xc0000-0xcffff could not be reserved
Sep 22 10:58:16 tony pnp: 00:0e: iomem range 0xe0000-0xfffff could not be reserved
Sep 22 10:58:16 tony pnp: 00:0e: iomem range 0x100000-0x7e7fffff could not be reserved
Sep 22 10:58:16 tony Time: tsc clocksource has been installed.
Sep 22 10:58:16 tony PCI: Bridge: 0000:00:01.0
Sep 22 10:58:16 tony IO window: disabled.
Sep 22 10:58:16 tony MEM window: disabled.
Sep 22 10:58:16 tony PREFETCH window: bfc00000-bfcfffff
Sep 22 10:58:16 tony PCI: Bridge: 0000:00:1c.0
Sep 22 10:58:16 tony IO window: disabled.
Sep 22 10:58:16 tony MEM window: disabled.
Sep 22 10:58:16 tony PREFETCH window: bfd00000-bfdfffff
Sep 22 10:58:16 tony PCI: Bridge: 0000:00:1c.4
Sep 22 10:58:16 tony IO window: a000-afff
Sep 22 10:58:16 tony MEM window: ff600000-ff6fffff
Sep 22 10:58:16 tony PREFETCH window: disabled.
Sep 22 10:58:16 tony PCI: Bridge: 0000:00:1e.0
Sep 22 10:58:16 tony IO window: b000-bfff
Sep 22 10:58:16 tony MEM window: ff700000-ff7fffff
Sep 22 10:58:16 tony PREFETCH window: bfe00000-bfefffff
Sep 22 10:58:16 tony ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
Sep 22 10:58:16 tony ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
Sep 22 10:58:16 tony ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 17
Sep 22 10:58:16 tony NET: Registered protocol family 2
Sep 22 10:58:16 tony IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
Sep 22 10:58:16 tony TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
Sep 22 10:58:16 tony TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
Sep 22 10:58:16 tony TCP: Hash tables configured (established 131072 bind 65536)
Sep 22 10:58:16 tony TCP reno registered
Sep 22 10:58:16 tony checking if image is initramfs...<6>Switched to high resolution mode on CPU 1
Sep 22 10:58:16 tony Switched to high resolution mode on CPU 0
Sep 22 10:58:16 tony it is
Sep 22 10:58:16 tony Freeing initrd memory: 1573k freed
Sep 22 10:58:16 tony apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
Sep 22 10:58:16 tony apm: disabled - APM is not SMP safe.
Sep 22 10:58:16 tony highmem bounce pool size: 64 pages
Sep 22 10:58:16 tony VFS: Disk quotas dquot_6.5.1
Sep 22 10:58:16 tony Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Sep 22 10:58:16 tony Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Sep 22 10:58:16 tony io scheduler noop registered
Sep 22 10:58:16 tony io scheduler anticipatory registered
Sep 22 10:58:16 tony io scheduler deadline registered
Sep 22 10:58:16 tony io scheduler cfq registered (default)
Sep 22 10:58:16 tony 0000:00:1a.7 EHCI: BIOS handoff failed (BIOS bug ?) 01010001
Sep 22 10:58:16 tony assign_interrupt_mode Found MSI capability
Sep 22 10:58:16 tony assign_interrupt_mode Found MSI capability
Sep 22 10:58:16 tony assign_interrupt_mode Found MSI capability
Sep 22 10:58:16 tony isapnp: Scanning for PnP cards...
Sep 22 10:58:16 tony isapnp: No Plug & Play device found
Sep 22 10:58:16 tony Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
Sep 22 10:58:16 tony serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Sep 22 10:58:16 tony 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Sep 22 10:58:16 tony RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
Sep 22 10:58:16 tony loop: module loaded
Sep 22 10:58:16 tony input: Macintosh mouse button emulation as /class/input/input0
Sep 22 10:58:16 tony PNP: PS/2 Controller [PNP0f03:PS2M] at 0x60,0x64 irq 12
Sep 22 10:58:16 tony PNP: PS/2 controller doesn't have KBD irq; using default 1
Sep 22 10:58:16 tony serio: i8042 KBD port at 0x60,0x64 irq 1
Sep 22 10:58:16 tony serio: i8042 AUX port at 0x60,0x64 irq 12
Sep 22 10:58:16 tony mice: PS/2 mouse device common for all mice
Sep 22 10:58:16 tony TCP cubic registered
Sep 22 10:58:16 tony NET: Registered protocol family 1
Sep 22 10:58:16 tony NET: Registered protocol family 17
Sep 22 10:58:16 tony Using IPI No-Shortcut mode
Sep 22 10:58:16 tony Freeing unused kernel memory: 304k freed
Sep 22 10:58:16 tony PCI: Enabling device 0000:02:00.1 (0000 -> 0001)
Sep 22 10:58:16 tony ACPI: PCI Interrupt 0000:02:00.1[B] -> GSI 17 (level, low) -> IRQ 17
Sep 22 10:58:16 tony scsi0 : pata_jmicron
Sep 22 10:58:16 tony scsi1 : pata_jmicron
Sep 22 10:58:16 tony ata1: PATA max UDMA/100 cmd 0x0001ac00 ctl 0x0001a882 bmdma 0x0001a400 irq 17
Sep 22 10:58:16 tony ata2: PATA max UDMA/100 cmd 0x0001a800 ctl 0x0001a482 bmdma 0x0001a408 irq 17
Sep 22 10:58:16 tony ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
Sep 22 10:58:16 tony ahci 0000:02:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
Sep 22 10:58:16 tony ahci 0000:02:00.0: flags: 64bit ncq pm led clo pmp pio slum part
Sep 22 10:58:16 tony scsi2 : ahci
Sep 22 10:58:16 tony scsi3 : ahci
Sep 22 10:58:16 tony ata3: SATA max UDMA/133 cmd 0xf8828100 ctl 0x00000000 bmdma 0x00000000 irq 16
Sep 22 10:58:16 tony ata4: SATA max UDMA/133 cmd 0xf8828180 ctl 0x00000000 bmdma 0x00000000 irq 16
Sep 22 10:58:16 tony ata3: SATA link down (SStatus 0 SControl 300)
Sep 22 10:58:16 tony ata4: SATA link down (SStatus 0 SControl 300)
Sep 22 10:58:16 tony ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
Sep 22 10:58:16 tony ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 18
Sep 22 10:58:16 tony scsi4 : ata_piix
Sep 22 10:58:16 tony scsi5 : ata_piix
Sep 22 10:58:16 tony ata5: SATA max UDMA/133 cmd 0x0001e880 ctl 0x0001e802 bmdma 0x0001e080 irq 18
Sep 22 10:58:16 tony ata6: SATA max UDMA/133 cmd 0x0001e480 ctl 0x0001e402 bmdma 0x0001e088 irq 18
Sep 22 10:58:16 tony ata5.00: ATA-7: ST3250620AS, 3.AAK, max UDMA/133
Sep 22 10:58:16 tony ata5.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
Sep 22 10:58:16 tony ata5.00: configured for UDMA/133
Sep 22 10:58:16 tony ata6.00: ATAPI: ASUS DRW-1814BLT, 1.13, max UDMA/66
Sep 22 10:58:16 tony ata6.00: configured for UDMA/66
Sep 22 10:58:16 tony scsi 4:0:0:0: Direct-Access ATA ST3250620AS 3.AA PQ: 0 ANSI: 5
Sep 22 10:58:16 tony scsi 5:0:0:0: CD-ROM ASUS DRW-1814BLT 1.13 PQ: 0 ANSI: 5
Sep 22 10:58:16 tony ata_piix 0000:00:1f.5: MAP [ P0 P2 P1 P3 ]
Sep 22 10:58:16 tony ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 19 (level, low) -> IRQ 18
Sep 22 10:58:16 tony scsi6 : ata_piix
Sep 22 10:58:16 tony scsi7 : ata_piix
Sep 22 10:58:16 tony ata7: SATA max UDMA/133 cmd 0x0001d080 ctl 0x0001d002 bmdma 0x0001c800 irq 18
Sep 22 10:58:16 tony ata8: SATA max UDMA/133 cmd 0x0001cc00 ctl 0x0001c882 bmdma 0x0001c808 irq 18
Sep 22 10:58:16 tony usbcore: registered new interface driver usbfs
Sep 22 10:58:16 tony usbcore: registered new interface driver hub
Sep 22 10:58:16 tony usbcore: registered new device driver usb
Sep 22 10:58:16 tony USB Universal Host Controller Interface driver v3.0
Sep 22 10:58:16 tony ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
Sep 22 10:58:16 tony uhci_hcd 0000:00:1a.0: UHCI Host Controller
Sep 22 10:58:16 tony uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
Sep 22 10:58:16 tony uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000d880
Sep 22 10:58:16 tony usb usb1: configuration #1 chosen from 1 choice
Sep 22 10:58:16 tony hub 1-0:1.0: USB hub found
Sep 22 10:58:16 tony hub 1-0:1.0: 2 ports detected
Sep 22 10:58:16 tony ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 17 (level, low) -> IRQ 17
Sep 22 10:58:16 tony uhci_hcd 0000:00:1a.1: UHCI Host Controller
Sep 22 10:58:16 tony uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
Sep 22 10:58:16 tony uhci_hcd 0000:00:1a.1: irq 17, io base 0x0000dc00
Sep 22 10:58:16 tony usb usb2: configuration #1 chosen from 1 choice
Sep 22 10:58:16 tony hub 2-0:1.0: USB hub found
Sep 22 10:58:16 tony hub 2-0:1.0: 2 ports detected
Sep 22 10:58:16 tony sd 4:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
Sep 22 10:58:16 tony sd 4:0:0:0: [sda] Write Protect is off
Sep 22 10:58:16 tony sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Sep 22 10:58:16 tony sd 4:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
Sep 22 10:58:16 tony sd 4:0:0:0: [sda] Write Protect is off
Sep 22 10:58:16 tony sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Sep 22 10:58:16 tony sda: sda1 sda2 < sda5 sda6 sda7 >
Sep 22 10:58:16 tony sd 4:0:0:0: [sda] Attached SCSI disk
Sep 22 10:58:16 tony sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
Sep 22 10:58:16 tony Uniform CD-ROM driver Revision: 3.20
Sep 22 10:58:16 tony ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 19
Sep 22 10:58:16 tony uhci_hcd 0000:00:1d.0: UHCI Host Controller
Sep 22 10:58:16 tony uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3
Sep 22 10:58:16 tony uhci_hcd 0000:00:1d.0: irq 19, io base 0x0000d400
Sep 22 10:58:16 tony usb usb3: configuration #1 chosen from 1 choice
Sep 22 10:58:16 tony hub 3-0:1.0: USB hub found
Sep 22 10:58:16 tony hub 3-0:1.0: 2 ports detected
Sep 22 10:58:16 tony ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 18
Sep 22 10:58:16 tony uhci_hcd 0000:00:1d.1: UHCI Host Controller
Sep 22 10:58:16 tony uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4
Sep 22 10:58:16 tony uhci_hcd 0000:00:1d.1: irq 18, io base 0x0000d480
Sep 22 10:58:16 tony usb usb4: configuration #1 chosen from 1 choice
Sep 22 10:58:16 tony hub 4-0:1.0: USB hub found
Sep 22 10:58:16 tony hub 4-0:1.0: 2 ports detected
Sep 22 10:58:16 tony ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 20
Sep 22 10:58:16 tony uhci_hcd 0000:00:1d.2: UHCI Host Controller
Sep 22 10:58:16 tony uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5
Sep 22 10:58:16 tony uhci_hcd 0000:00:1d.2: irq 20, io base 0x0000d800
Sep 22 10:58:16 tony usb usb5: configuration #1 chosen from 1 choice
Sep 22 10:58:16 tony hub 5-0:1.0: USB hub found
Sep 22 10:58:16 tony hub 5-0:1.0: 2 ports detected
Sep 22 10:58:16 tony ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 20
Sep 22 10:58:16 tony ehci_hcd 0000:00:1a.7: EHCI Host Controller
Sep 22 10:58:16 tony ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6
Sep 22 10:58:16 tony ehci_hcd 0000:00:1a.7: debug port 1
Sep 22 10:58:16 tony ehci_hcd 0000:00:1a.7: irq 20, io mem 0xff9fb800
Sep 22 10:58:16 tony ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Sep 22 10:58:16 tony usb usb6: configuration #1 chosen from 1 choice
Sep 22 10:58:16 tony hub 6-0:1.0: USB hub found
Sep 22 10:58:16 tony hub 6-0:1.0: 4 ports detected
Sep 22 10:58:16 tony usb 4-2: new low speed USB device using uhci_hcd and address 2
Sep 22 10:58:16 tony ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 19
Sep 22 10:58:16 tony ehci_hcd 0000:00:1d.7: EHCI Host Controller
Sep 22 10:58:16 tony ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7
Sep 22 10:58:16 tony ehci_hcd 0000:00:1d.7: debug port 1
Sep 22 10:58:16 tony ehci_hcd 0000:00:1d.7: irq 19, io mem 0xff9fb400
Sep 22 10:58:16 tony ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Sep 22 10:58:16 tony usb usb7: configuration #1 chosen from 1 choice
Sep 22 10:58:16 tony hub 7-0:1.0: USB hub found
Sep 22 10:58:16 tony hub 7-0:1.0: 6 ports detected
Sep 22 10:58:16 tony kjournald starting. Commit interval 5 seconds
Sep 22 10:58:16 tony EXT3-fs: mounted filesystem with ordered data mode.
Sep 22 10:58:16 tony usb 4-2: new low speed USB device using uhci_hcd and address 3
Sep 22 10:58:16 tony usb 4-2: configuration #1 chosen from 1 choice
Sep 22 10:58:16 tony input: Power Button (FF) as /class/input/input1
Sep 22 10:58:16 tony ACPI: Power Button (FF) [PWRF]
Sep 22 10:58:16 tony input: Power Button (CM) as /class/input/input2
Sep 22 10:58:16 tony ACPI: Power Button (CM) [PWRB]
Sep 22 10:58:16 tony ACPI Exception (processor_core-0781): AE_NOT_FOUND, Processor Device is not present [20070126]
Sep 22 10:58:16 tony ACPI Exception (processor_core-0781): AE_NOT_FOUND, Processor Device is not present [20070126]
Sep 22 10:58:16 tony Linux agpgart interface v0.102 (c) Dave Jones
Sep 22 10:58:16 tony agpgart: Detected an Intel 965G Chipset.
Sep 22 10:58:16 tony agpgart: Detected 7676K stolen memory.
Sep 22 10:58:16 tony agpgart: AGP aperture is 256M @ 0xd0000000
Sep 22 10:58:16 tony sd 4:0:0:0: Attached scsi generic sg0 type 0
Sep 22 10:58:16 tony sr 5:0:0:0: Attached scsi generic sg1 type 5
Sep 22 10:58:16 tony PCI: Enabling device 0000:00:1f.3 (0001 -> 0003)
Sep 22 10:58:16 tony ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 18 (level, low) -> IRQ 20
Sep 22 10:58:16 tony PPP generic driver version 2.4.2
Sep 22 10:58:16 tony ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 21
Sep 22 10:58:16 tony usbcore: registered new interface driver hiddev
Sep 22 10:58:16 tony input: Microsoft Comfort Curve Keyboard 2000 as /class/input/input3
Sep 22 10:58:16 tony input: USB HID v1.11 Keyboard [Microsoft Comfort Curve Keyboard 2000] on usb-0000:00:1d.1-2
Sep 22 10:58:16 tony hda_codec: Unknown model for AD1988, trying auto-probe from BIOS...
Sep 22 10:58:16 tony input: Microsoft Comfort Curve Keyboard 2000 as /class/input/input4
Sep 22 10:58:16 tony input: USB HID v1.11 Device [Microsoft Comfort Curve Keyboard 2000] on usb-0000:00:1d.1-2
Sep 22 10:58:16 tony usbcore: registered new interface driver usbhid
Sep 22 10:58:16 tony drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
Sep 22 10:58:16 tony rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
Sep 22 10:58:16 tony rtc0: alarms up to one month, y3k
Sep 22 10:58:16 tony Linux video capture interface: v2.00
Sep 22 10:58:16 tony input: ImExPS/2 Generic Explorer Mouse as /class/input/input5
Sep 22 10:58:16 tony ACPI: PCI Interrupt 0000:04:03.0[A] -> GSI 21 (level, low) -> IRQ 22
Sep 22 10:58:16 tony ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[22] MMIO=[ff7ff800-ff7fffff] Max Packet=[2048] IR/IT contexts=[4/8]
Sep 22 10:58:16 tony ACPI: PCI Interrupt 0000:04:04.0[A] -> GSI 19 (level, low) -> IRQ 18
Sep 22 10:58:16 tony skge 1.11 addr 0xff7f8000 irq 18 chip Yukon-Lite rev 9
Sep 22 10:58:16 tony skge eth0: addr 00:18:f3:a8:8e:ab
Sep 22 10:58:16 tony bttv: driver version 0.9.17 loaded
Sep 22 10:58:16 tony bttv: using 8 buffers with 2080k (520 pages) each for capture
Sep 22 10:58:16 tony bttv: Bt8xx card found (0).
Sep 22 10:58:16 tony ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 21 (level, low) -> IRQ 22
Sep 22 10:58:16 tony bttv0: Bt878 (rev 17) at 0000:04:00.0, irq: 22, latency: 64, mmio: 0xbfefe000
Sep 22 10:58:16 tony bttv0: detected: Pinnacle PCTV [card=39], PCI subsystem ID is 11bd:0012
Sep 22 10:58:16 tony bttv0: using: Pinnacle PCTV Studio/Rave [card=39,autodetected]
Sep 22 10:58:16 tony bttv0: i2c: checking for MSP34xx @ 0x80... <5>sk98lin: driver has been replaced by the skge driver and is scheduled for removal
Sep 22 10:58:16 tony not found
Sep 22 10:58:16 tony bttv0: pinnacle/mt: id=4 info="PAL+SECAM / mono" radio=no
Sep 22 10:58:16 tony bttv0: using tuner=33
Sep 22 10:58:16 tony bttv0: i2c: checking for MSP34xx @ 0x80... not found
Sep 22 10:58:16 tony bttv0: i2c: checking for TDA9875 @ 0xb0... not found
Sep 22 10:58:16 tony bttv0: i2c: checking for TDA7432 @ 0x8a... not found
Sep 22 10:58:16 tony tuner 1-004b: chip found @ 0x96 (bt878 #0 [sw])
Sep 22 10:58:16 tony tda9887 1-004b: tda988[5/6/7] found @ 0x4b (tuner)
Sep 22 10:58:16 tony bttv0: registered device video0
Sep 22 10:58:16 tony bttv0: registered device vbi0
Sep 22 10:58:16 tony bttv0: PLL: 28636363 => 35468950 .. ok
Sep 22 10:58:16 tony bt878: AUDIO driver version 0.0.0 loaded
Sep 22 10:58:16 tony bt878: Bt878 AUDIO function found (0).
Sep 22 10:58:16 tony ACPI: PCI Interrupt 0000:04:00.1[A] -> GSI 21 (level, low) -> IRQ 22
Sep 22 10:58:16 tony bt878_probe: card id=[0x1211bd], Unknown card.
Sep 22 10:58:16 tony Exiting..
Sep 22 10:58:16 tony ACPI: PCI interrupt for device 0000:04:00.1 disabled
Sep 22 10:58:16 tony bt878: probe of 0000:04:00.1 failed with error -22
Sep 22 10:58:16 tony EXT3 FS on sda6, internal journal
Sep 22 10:58:16 tony kjournald starting. Commit interval 5 seconds
Sep 22 10:58:16 tony EXT3 FS on sda7, internal journal
Sep 22 10:58:16 tony EXT3-fs: mounted filesystem with ordered data mode.
Sep 22 10:58:16 tony fuse init (API version 7.8)
Sep 22 10:58:16 tony Adding 522072k swap on /dev/sda5. Priority:-1 extents:1 across:522072k
Sep 22 10:58:16 tony skge eth0: enabling interface
Sep 22 10:58:16 tony dhcpcd[5085]: eth0: dhcpcd 3.1.4 starting
Sep 22 10:58:16 tony dhcpcd[5085]: eth0: hardware address = 00:18:f3:a8:8e:ab
Sep 22 10:58:16 tony dhcpcd[5085]: eth0: broadcasting for a lease
Sep 22 10:58:18 tony skge eth0: Link is up at 100 Mbps, full duplex, flow control none
Sep 22 10:58:19 tony dhcpcd[5085]: eth0: offered 192.168.0.2 from 192.168.0.254
Sep 22 10:58:19 tony dhcpcd[5085]: eth0: checking 192.168.0.2 is available on attached networks
Sep 22 10:58:20 tony dhcpcd[5085]: eth0: leased 192.168.0.2 for 864000 seconds
Sep 22 10:58:20 tony dhcpcd[5085]: eth0: no renewal time supplied, assuming 432000 seconds
Sep 22 10:58:20 tony dhcpcd[5085]: eth0: no rebind time supplied, assuming 756000 seconds
Sep 22 10:58:20 tony dhcpcd[5085]: eth0: adding IP address 192.168.0.2/24
Sep 22 10:58:20 tony dhcpcd[5085]: eth0: adding default route via 192.168.0.254 metric 0
Sep 22 10:58:21 tony NET: Registered protocol family 10
Sep 22 10:58:21 tony lo: Disabled Privacy Extensions
Sep 22 10:58:21 tony Mobile IPv6
Sep 22 10:58:24 tony [drm] Initialized drm 1.1.0 20060810
Sep 22 10:58:24 tony ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
Sep 22 10:58:24 tony [drm] Initialized i915 1.6.0 20060119 on minor 0