###########################################################
#
# fuse
#
###########################################################
#
# FUSE_VERSION, FUSE_SITE and FUSE_SOURCE define
# the upstream location of the source code for the package.
# FUSE_DIR is the directory which is created when the source
# archive is unpacked.
# FUSE_UNZIP is the command used to unzip the source.
# It is usually "zcat" (for .gz) or "bzcat" (for .bz2)
#
# You should change all these variables to suit your package.
# Please make sure that you add a description, and that you
# list all your packages' dependencies, seperated by commas.
#
# If you list yourself as MAINTAINER, please give a valid email
# address, and indicate your irc nick if it cannot be easily deduced
# from your name or email address. If you leave MAINTAINER set to
# "NSLU2 Linux" other developers will feel free to edit.
#
FUSE_SITE=http://$(SOURCEFORGE_MIRROR)/sourceforge/fuse
FUSE_VERSION=2.5.3
FUSE_SOURCE=fuse-$(FUSE_VERSION).tar.gz
FUSE_DIR=fuse-$(FUSE_VERSION)
FUSE_UNZIP=zcat
FUSE_MAINTAINER=NSLU2 Linux <nslu2-linux@yahoogroups.com>
FUSE_DESCRIPTION=Filesystem in a userspace program.
FUSE_SECTION=kernel
FUSE_PRIORITY=optional
FUSE_DEPENDS=
FUSE_SUGGESTS=
FUSE_CONFLICTS=
#
# FUSE_IPK_VERSION should be incremented when the ipk changes.
#
FUSE_IPK_VERSION=1
#
# FUSE_CONFFILES should be a list of user-editable files
#FUSE_CONFFILES=/opt/etc/fuse.conf /opt/etc/init.d/SXXfuse
#
# FUSE_PATCHES should list any patches, in the the order in
# which they should be applied to the source code.
#
#FUSE_PATCHES=$(FUSE_SOURCE_DIR)/configure.patch
#
# If the compilation of the package requires additional
# compilation or linking flags, then list them here.
#
FUSE_CPPFLAGS=
FUSE_LDFLAGS=
#
# FUSE_BUILD_DIR is the directory in which the build is done.
# FUSE_SOURCE_DIR is the directory which holds all the
# patches and ipkg control files.
# FUSE_IPK_DIR is the directory in which the ipk is built.
# FUSE_IPK is the name of the resulting ipk files.
#
# You should not change any of these variables.
#
FUSE_BUILD_DIR=$(BUILD_DIR)/fuse
FUSE_SOURCE_DIR=$(SOURCE_DIR)/fuse
FUSE_IPK_DIR=$(BUILD_DIR)/fuse-$(FUSE_VERSION)-ipk
FUSE_IPK=$(BUILD_DIR)/fuse_$(FUSE_VERSION)-$(FUSE_IPK_VERSION)_$(TARGET_ARCH).ipk
.PHONY: fuse-source fuse-unpack fuse fuse-stage fuse-ipk fuse-clean fuse-dirclean fuse-check
#
# This is the dependency on the source code. If the source is missing,
# then it will be fetched from the site using wget.
#
$(DL_DIR)/$(FUSE_SOURCE):
$(WGET) -P $(DL_DIR) $(FUSE_SITE)/$(FUSE_SOURCE) || \
$(WGET) -P $(DL_DIR) $(SOURCES_NLO_SITE)/$(FUSE_SOURCE)
#
# The source code depends on it existing within the download directory.
# This target will be called by the top level Makefile to download the
# source code's archive (.tar.gz, .bz2, etc.)
#
fuse-source: $(DL_DIR)/$(FUSE_SOURCE) $(FUSE_PATCHES)
#
# This target unpacks the source code in the build directory.
# If the source archive is not .tar.gz or .tar.bz2, then you will need
# to change the commands here. Patches to the source code are also
# applied in this target as required.
#
# This target also configures the build within the build directory.
# Flags such as LDFLAGS and CPPFLAGS should be passed into configure
# and NOT $(MAKE) below. Passing it to configure causes configure to
# correctly BUILD the Makefile with the right paths, where passing it
# to Make causes it to override the default search paths of the compiler.
#
# If the compilation of the package requires other packages to be staged
# first, then do that first (e.g. "$(MAKE) <bar>-stage <baz>-stage").
#
# If the package uses GNU libtool, you should invoke $(PATCH_LIBTOOL) as
# shown below to make various patches to it.
#
$(FUSE_BUILD_DIR)/.configured: $(DL_DIR)/$(FUSE_SOURCE) $(FUSE_PATCHES) make/fuse.mk
# $(MAKE) firmware-oleg-unpack
rm -rf $(BUILD_DIR)/$(FUSE_DIR) $(FUSE_BUILD_DIR)
$(FUSE_UNZIP) $(DL_DIR)/$(FUSE_SOURCE) | tar -C $(BUILD_DIR) -xvf -
if test -n "$(FUSE_PATCHES)" ; \
then cat $(FUSE_PATCHES) | \
patch -d $(BUILD_DIR)/$(FUSE_DIR) -p0 ; \
fi
if test "$(BUILD_DIR)/$(FUSE_DIR)" != "$(FUSE_BUILD_DIR)" ; \
then mv $(BUILD_DIR)/$(FUSE_DIR) $(FUSE_BUILD_DIR) ; \
fi
(cd $(FUSE_BUILD_DIR); \
$(TARGET_CONFIGURE_OPTS) \
CFLAGS="$(STAGING_CPPFLAGS) $(FUSE_CPPFLAGS)" \
LDFLAGS="$(STAGING_LDFLAGS) $(FUSE_LDFLAGS)" \
./configure \
--build=$(GNU_HOST_NAME) \
--host=$(GNU_TARGET_NAME) \
--target=$(GNU_TARGET_NAME) \
--prefix=/opt \
--disable-nls \
--disable-static \
--enable-kernel-module \
--with-kernel=$(FIRMWARE_OLEG_BUILD_DIR)/src/linux/linux \
--with-kernel-build=$(FIRMWARE_OLEG_BUILD_DIR)/src/linux/linux \
)
$(PATCH_LIBTOOL) $(FUSE_BUILD_DIR)/libtool
touch $@
fuse-unpack: $(FUSE_BUILD_DIR)/.configured
#
# This builds the actual binary.
#
$(FUSE_BUILD_DIR)/.built: $(FUSE_BUILD_DIR)/.configured
rm -f $@
$(MAKE) -C $(FUSE_BUILD_DIR)
touch $@
#
# This is the build convenience target.
#
fuse: $(FUSE_BUILD_DIR)/.built
#
# If you are building a library, then you need to stage it too.
#
$(FUSE_BUILD_DIR)/.staged: $(FUSE_BUILD_DIR)/.built
rm -f $@
$(MAKE) -C $(FUSE_BUILD_DIR) DESTDIR=$(STAGING_DIR) install
touch $@
fuse-stage: $(FUSE_BUILD_DIR)/.staged
#
# This rule creates a control file for ipkg. It is no longer
# necessary to create a seperate control file under sources/fuse
#
$(FUSE_IPK_DIR)/CONTROL/control:
@install -d $(@D)
@rm -f $@
@echo "Package: fuse" >>$@
@echo "Architecture: $(TARGET_ARCH)" >>$@
@echo "Priority: $(FUSE_PRIORITY)" >>$@
@echo "Section: $(FUSE_SECTION)" >>$@
@echo "Version: $(FUSE_VERSION)-$(FUSE_IPK_VERSION)" >>$@
@echo "Maintainer: $(FUSE_MAINTAINER)" >>$@
@echo "Source: $(FUSE_SITE)/$(FUSE_SOURCE)" >>$@
@echo "Description: $(FUSE_DESCRIPTION)" >>$@
@echo "Depends: $(FUSE_DEPENDS)" >>$@
@echo "Suggests: $(FUSE_SUGGESTS)" >>$@
@echo "Conflicts: $(FUSE_CONFLICTS)" >>$@
#
# This builds the IPK file.
#
# Binaries should be installed into $(FUSE_IPK_DIR)/opt/sbin or $(FUSE_IPK_DIR)/opt/bin
# (use the location in a well-known Linux distro as a guide for choosing sbin or bin).
# Libraries and include files should be installed into $(FUSE_IPK_DIR)/opt/{lib,include}
# Configuration files should be installed in $(FUSE_IPK_DIR)/opt/etc/fuse/...
# Documentation files should be installed in $(FUSE_IPK_DIR)/opt/doc/fuse/...
# Daemon startup scripts should be installed in $(FUSE_IPK_DIR)/opt/etc/init.d/S??fuse
#
# You may need to patch your application to make it use these locations.
#
$(FUSE_IPK): $(FUSE_BUILD_DIR)/.built
rm -rf $(FUSE_IPK_DIR) $(BUILD_DIR)/fuse_*_$(TARGET_ARCH).ipk
$(MAKE) -C $(FUSE_BUILD_DIR) DESTDIR=$(FUSE_IPK_DIR) install-strip
install -d $(FUSE_IPK_DIR)/opt/etc/
install -m 644 $(FUSE_SOURCE_DIR)/fuse.conf $(FUSE_IPK_DIR)/opt/etc/fuse.conf
install -d $(FUSE_IPK_DIR)/opt/etc/init.d
install -m 755 $(FUSE_SOURCE_DIR)/rc.fuse $(FUSE_IPK_DIR)/opt/etc/init.d/SXXfuse
sed -i -e '/^#!/aOPTWARE_TARGET=${OPTWARE_TARGET}' $(FUSE_IPK_DIR)/opt/etc/init.d/SXXfuse
$(MAKE) $(FUSE_IPK_DIR)/CONTROL/control
install -m 755 $(FUSE_SOURCE_DIR)/postinst $(FUSE_IPK_DIR)/CONTROL/postinst
sed -i -e '/^#!/aOPTWARE_TARGET=${OPTWARE_TARGET}' $(FUSE_IPK_DIR)/CONTROL/postinst
install -m 755 $(FUSE_SOURCE_DIR)/prerm $(FUSE_IPK_DIR)/CONTROL/prerm
sed -i -e '/^#!/aOPTWARE_TARGET=${OPTWARE_TARGET}' $(FUSE_IPK_DIR)/CONTROL/prerm
echo $(FUSE_CONFFILES) | sed -e 's/ /\n/g' > $(FUSE_IPK_DIR)/CONTROL/conffiles
cd $(BUILD_DIR); $(IPKG_BUILD) $(FUSE_IPK_DIR)
#
# This is called from the top level makefile to create the IPK file.
#
fuse-ipk: $(FUSE_IPK)
#
# This is called from the top level makefile to clean all of the built files.
#
fuse-clean:
rm -f $(FUSE_BUILD_DIR)/.built
-$(MAKE) -C $(FUSE_BUILD_DIR) clean
#
# This is called from the top level makefile to clean all dynamically created
# directories.
#
fuse-dirclean:
rm -rf $(BUILD_DIR)/$(FUSE_DIR) $(FUSE_BUILD_DIR) $(FUSE_IPK_DIR) $(FUSE_IPK)
#
#
# Some sanity check for the package.
#
fuse-check: $(FUSE_IPK)
perl scripts/optware-check-package.pl --target=$(OPTWARE_TARGET) $(FUSE_IPK)