rendered paste body[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.4.14 (bmayland@ustest) (gcc version 5.3.0 (OpenWrt GCC 5.3.0 49941) ) #1 SMP Sat Dec 31 20:04:50 UTC 2016
[ 0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine model: Raspberry Pi 3 Model B Rev 1.2
[ 0.000000] cma: Reserved 16 MiB at 0x3a000000
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 241664
[ 0.000000] free_area_init_node: node 0, pgdat 80580e00, node_mem_map b988e000
[ 0.000000] Normal zone: 1888 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 241664 pages, LIFO batch:31
[ 0.000000] [bcm2709_smp_init_cpus] enter (9480->f3003010)
[ 0.000000] [bcm2709_smp_init_cpus] ncores=4
[ 0.000000] PERCPU: Embedded 12 pages/cpu @b984e000 s17984 r8192 d22976 u49152
[ 0.000000] pcpu-alloc: s17984 r8192 d22976 u49152 alloc=12*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 239776
[ 0.000000] Kernel command line: 8250.nr_uarts=1 dma.dmachans=0x7f35 bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2709.boardrev=0xa22082 bcm2709.serial=0xba42697f smsc95xx.macaddr=B8:27:EB:42:69:7F bcm2708_fb.fbswap=1 bcm2709.uart_clock=48000000 vc_mem.mem_base=0x3dc00000 vc_mem.mem_size=0x3f000000 dwc_otg.lpm_enable=0 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 935504K/966656K available (3947K kernel code, 126K rwdata, 1416K rodata, 216K init, 366K bss, 14768K reserved, 16384K cma-reserved)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ 0.000000] vmalloc : 0xbb800000 - 0xff800000 (1088 MB)
[ 0.000000] lowmem : 0x80000000 - 0xbb000000 ( 944 MB)
[ 0.000000] modules : 0x7f000000 - 0x80000000 ( 16 MB)
[ 0.000000] .text : 0x80008000 - 0x80545174 (5365 kB)
[ 0.000000] .init : 0x80546000 - 0x8057c000 ( 216 kB)
[ 0.000000] .data : 0x8057c000 - 0x8059b8ac ( 127 kB)
[ 0.000000] .bss : 0x8059b8ac - 0x805f7338 ( 367 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] Architected cp15 timer(s) running at 19.20MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[ 0.000008] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[ 0.000022] Switching to timer-based delay loop, resolution 52ns
[ 0.000201] Console: colour dummy device 80x30
[ 0.000826] console [tty1] enabled
[ 0.000867] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[ 0.000920] pid_max: default: 32768 minimum: 301
[ 0.001051] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.001084] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.001755] CPU: Testing write buffer coherency: ok
[ 0.002188] CPU0: update cpu_capacity 1024
[ 0.002218] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.002246] [bcm2709_smp_prepare_cpus] enter
[ 0.002356] Setting up static identity map for 0x8240 - 0x8298
[ 0.003553] [bcm2709_boot_secondary] cpu:1 started (0) 17
[ 0.003850] [bcm2709_secondary_init] enter cpu:1
[ 0.003881] CPU1: update cpu_capacity 1024
[ 0.003887] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.004189] [bcm2709_boot_secondary] cpu:2 started (0) 17
[ 0.004392] [bcm2709_secondary_init] enter cpu:2
[ 0.004411] CPU2: update cpu_capacity 1024
[ 0.004417] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[ 0.004701] [bcm2709_boot_secondary] cpu:3 started (0) 15
[ 0.004880] [bcm2709_secondary_init] enter cpu:3
[ 0.004899] CPU3: update cpu_capacity 1024
[ 0.004905] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[ 0.004956] Brought up 4 CPUs
[ 0.005046] SMP: Total of 4 processors activated (153.60 BogoMIPS).
[ 0.005072] CPU: All CPU(s) started in HYP mode.
[ 0.005096] CPU: Virtualization extensions available.
[ 0.013406] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
[ 0.013710] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.014381] pinctrl core: initialized pinctrl subsystem
[ 0.014812] NET: Registered protocol family 16
[ 0.019791] DMA: preallocated 4096 KiB pool for atomic coherent allocations
[ 0.049924] cpuidle: using governor ladder
[ 0.079944] cpuidle: using governor menu
[ 0.085758] bcm2709: Mini UART enabled
[ 0.085869] Serial: AMBA PL011 UART driver
[ 0.086012] uart-pl011 3f201000.uart: could not find pctldev for node /soc/gpio@7e200000/uart0_pins, deferring probe
[ 0.086190] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
[ 0.140836] bcm2835-dma 3f007000.dma: DMA legacy API manager at f3007000, dmachans=0x1
[ 0.142208] SCSI subsystem initialized
[ 0.142394] usbcore: registered new interface driver usbfs
[ 0.142490] usbcore: registered new interface driver hub
[ 0.142575] usbcore: registered new device driver usb
[ 0.150020] raspberrypi-firmware soc:firmware: Attached to firmware from 2016-06-02 16:01
[ 0.176954] clocksource: Switched to clocksource arch_sys_counter
[ 0.184632] NET: Registered protocol family 2
[ 0.185200] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.185334] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.185541] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.185645] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.185710] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.185920] NET: Registered protocol family 1
[ 0.187564] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.196112] io scheduler noop registered
[ 0.196150] io scheduler deadline registered
[ 0.196205] io scheduler cfq registered (default)
[ 0.198634] BCM2708FB: allocated DMA memory fa400000
[ 0.198680] BCM2708FB: allocated DMA channel 0 @ f3007000
[ 0.203425] Console: switching to colour frame buffer device 82x26
[ 0.207607] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
[ 0.209644] 3f215040.uart: ttyS0 at MMIO 0x3f215040 (irq = 59, base_baud = 31250000) is a 16550
[ 0.212810] vc-cma: Videocore CMA driver
[ 0.214101] vc-cma: vc_cma_base = 0x00000000
[ 0.215352] vc-cma: vc_cma_size = 0x00000000 (0 MiB)
[ 0.216559] vc-cma: vc_cma_initial = 0x00000000 (0 MiB)
[ 0.217901] vc-mem: phys_addr:0x00000000 mem_base=0x3dc00000 mem_size:0x3f000000(1008 MiB)
[ 0.231191] brd: module loaded
[ 0.239123] loop: module loaded
[ 0.240999] vchiq: vchiq_init_state: slot_zero = 0xba480000, is_master = 0
[ 0.243720] usbcore: registered new interface driver smsc95xx
[ 0.244907] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[ 0.446262] Core Release: 2.80a
[ 0.447391] Setting default values for core params
[ 0.448558] Finished setting default values for core params
[ 0.650012] Using Buffer DMA mode
[ 0.651174] Periodic Transfer Interrupt Enhancement - disabled
[ 0.652393] Multiprocessor Interrupt Enhancement - disabled
[ 0.653603] OTG VER PARAM: 0, OTG VER FLAG: 0
[ 0.654790] Dedicated Tx FIFOs mode
[ 0.656196] WARN::dwc_otg_hcd_init:1047: FIQ DMA bounce buffers: virt = 0xba414000 dma = 0xfa414000 len=9024
[ 0.658562] FIQ FSM acceleration enabled for :
[ 0.658562] Non-periodic Split Transactions
[ 0.658562] Periodic Split Transactions
[ 0.658562] High-Speed Isochronous Endpoints
[ 0.658562] Interrupt/Control Split Transaction hack enabled
[ 0.664511] dwc_otg: Microframe scheduler enabled
[ 0.664559] WARN::hcd_init_fiq:413: FIQ on core 1 at 0x8029c9c8
[ 0.665778] WARN::hcd_init_fiq:414: FIQ ASM at 0x8000ee78 length 36
[ 0.667003] WARN::hcd_init_fiq:439: MPHI regs_base at 0xbb87e000
[ 0.668237] dwc_otg 3f980000.usb: DWC OTG Controller
[ 0.669430] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
[ 0.670647] dwc_otg 3f980000.usb: irq 62, io mem 0x00000000
[ 0.671849] Init: Port Power? op_state=1
[ 0.673001] Init: Power Port (0)
[ 0.674295] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.675477] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.676650] usb usb1: Product: DWC OTG Controller
[ 0.677814] usb usb1: Manufacturer: Linux 4.4.14 dwc_otg_hcd
[ 0.678967] usb usb1: SerialNumber: 3f980000.usb
[ 0.680694] hub 1-0:1.0: USB hub found
[ 0.681829] hub 1-0:1.0: 1 port detected
[ 0.683385] dwc_otg: FIQ enabled
[ 0.683393] dwc_otg: NAK holdoff enabled
[ 0.683400] dwc_otg: FIQ split-transaction FSM enabled
[ 0.683425] Module dwc_common_port init
[ 0.683588] usbcore: registered new interface driver uas
[ 0.684753] usbcore: registered new interface driver usb-storage
[ 0.685927] mousedev: PS/2 mouse device common for all mice
[ 0.687732] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer
[ 0.688985] sdhci: Secure Digital Host Controller Interface driver
[ 0.690114] sdhci: Copyright(c) Pierre Ossman
[ 0.691471] sdhost: log_buf @ ba413000 (fa413000)
[ 0.766970] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
[ 0.770301] mmc-bcm2835 3f300000.mmc: mmc_debug:0 mmc_debug2:0
[ 0.771442] mmc-bcm2835 3f300000.mmc: DMA channel allocated
[ 0.827037] sdhci-pltfm: SDHCI platform and OF driver helper
[ 0.829811] NET: Registered protocol family 10
[ 0.831745] NET: Registered protocol family 17
[ 0.832880] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[ 0.835139] 8021q: 802.1Q VLAN Support v1.8
[ 0.836654] Registering SWP/SWPB emulation handler
[ 0.838427] vc-sm: Videocore shared memory driver
[ 0.839565] [vc_sm_connected_init]: start
[ 0.841055] [vc_sm_connected_init]: end - returning 0
[ 0.843436] 3f201000.uart: ttyAMA0 at MMIO 0x3f201000 (irq = 87, base_baud = 0) is a PL011 rev2
[ 0.846131] of_cfs_init
[ 0.847389] of_cfs_init: OK
[ 0.849341] Waiting for root device /dev/mmcblk0p2...
[ 0.868040] mmc0: host does not support reading read-only switch, assuming write-enable
[ 0.872676] mmc0: new high speed SDHC card at address aaaa
[ 0.874373] mmcblk0: mmc0:aaaa SL16G 14.8 GiB
[ 0.877621] mmcblk0: p1 p2
[ 0.887127] Indeed it is in host mode hprt0 = 00021501
[ 0.896311] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[ 0.899045] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 0.901759] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 0.905620] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[ 0.964886] EXT4-fs (mmcblk0p2): mounted filesystem without journal. Opts: (null)
[ 0.967069] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[ 0.968593] Freeing unused kernel memory: 216K (80546000 - 8057c000)
[ 0.999287] mmc1: new high speed SDIO card at address 0001
[ 1.042512] init: Console is alive
[ 1.043848] init: - watchdog -
[ 1.066987] usb 1-1: new high-speed USB device number 2 using dwc_otg
[ 1.068287] Indeed it is in host mode hprt0 = 00001101
[ 1.125960] init: - preinit -
[ 1.193128] random: procd urandom read with 31 bits of entropy available
[ 1.267207] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
[ 1.268481] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.270399] hub 1-1:1.0: USB hub found
[ 1.271689] hub 1-1:1.0: 5 ports detected
[ 1.546969] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[ 1.647178] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[ 1.648516] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.652504] smsc95xx v1.0.4
[ 1.710022] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:42:69:7f
[ 4.255208] mount_root: mounting /dev/root
[ 4.258472] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[ 4.318328] procd: - early -
[ 4.319699] procd: - watchdog -
[ 4.943676] procd: - ubus -
[ 5.000148] procd: - init -
[ 5.711045] hidraw: raw HID events driver (C) Jiri Kosina
[ 5.720673] Loading modules backported from Linux version wt-2016-05-12-0-g7a54796
[ 5.723078] Backport generated by backports.git backports-20160216-0-ge3c56e4
[ 5.727477] usbcore: registered new interface driver usbhid
[ 5.728753] usbhid: USB HID core driver
[ 5.758203] usbcore: registered new interface driver rtl8xxxu
[ 5.864453] random: nonblocking pool is initialized
[ 5.878676] brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: Dec 15 2015 18:10:45 version 7.45.41.23 (r606571) FWID 01-cc4eda9c
[ 5.901437] brcmfmac: brcmf_cfg80211_reg_notifier: not a ISO3166 code (0x30 0x30)
[ 5.908049] usbcore: registered new interface driver brcmfmac
[ 9.168643] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
[ 9.174168] device eth0 entered promiscuous mode
[ 9.179047] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
[ 9.513337] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 9.630089] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 35.186897] EXT4-fs (mmcblk0p4): mounted filesystem without journal. Opts: (null)