Part of Slepp's ProjectsPastebinTURLImagebinFilebin
Feedback -- English French German Japanese
Create Upload Newest Tools Donate
Sign In | Create Account

Paste Description for 5.5G 80GB FAT32

iPod 5.5G 80GB booting with FAT32 reads working

5.5G 80GB FAT32
Friday, February 9th, 2007 at 2:58:18pm UTC 

  1. Linux version 2.4.24-ipod2 (root@helios) (gcc version 2.95.3 20010315 (release)(ColdFire patches - 20010318 from http://fiddes.net/coldfire/)(uClinux XIP and shared lib patches from http://www.snapgear.com/)) #37 Fri Feb 9 15:55:58 CET 2007
  2. Processor: ARM/VLSI ARM 7 TDMI revision 0
  3. Architecture: iPod
  4. On node 0 totalpages: 8192
  5. zone(0): 0 pages.
  6. zone(1): 8192 pages.
  7. zone(2): 0 pages.
  8. Kernel command line: root=/dev/hda3 rw
  9. Console: colour dummy device 80x30
  10. Calibrating delay loop... 37.37 BogoMIPS
  11. Memory: 32MB = 32MB total
  12. Memory: 30316KB available (1435K code, 549K data, 64K init)
  13. Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
  14. Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
  15. Mount cache hash table entries: 512 (order: 0, 4096 bytes)
  16. Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
  17. Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
  18. POSIX conformance testing by UNIFIX
  19. Linux NET4.0 for Linux 2.4
  20. Based upon Swansea University Computer Society NET3.039
  21. Initializing RT netlink socket
  22. ipodaudio: (c) Copyright 2003-2005 Bernard Leach <[email protected]>
  23. codec WM8758
  24. ipod_remote: $Id: ipodremote.c,v 1.2 2004/03/02 22:41:44 leachbj Exp $
  25. Starting kswapd
  26. Journalled Block Device driver loaded
  27. devfs: v1.12c (20020818) Richard Gooch ([email protected])
  28. devfs: boot_options: 0x1
  29. Console: switching to colour frame buffer device 40x30
  30. fb0: iPod frame buffer device
  31. Serial driver version 5.05c (2001-07-08) with no serial options enabled
  32. ttyS00 at 0xc0006000 (irq = 4) is a 8250
  33. ttyS01 at 0xc0006040 (irq = 7) is a 8250
  34. Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
  35. ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
  36. hda: TOSHIBA MK8010GAH, ATA DISK drive
  37. ide0 at 0xc30001e0-0xc30001e7,0xc30003f8 on irq 23
  38. hda: attached ide-disk driver.
  39. hda: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error }
  40. hda: task_no_data_intr: error=0x04 { DriveStatusError }
  41. hda: 156301488 sectors (80026 MB), CHS=155061/16/63
  42. Partition check:
  43.  /dev/ide/host0/bus0/target0/lun0: [PTBL] [9729/255/63] p1 p2 p3
  44. NET4: Linux TCP/IP 1.0 for NET4.0
  45. IP Protocols: ICMP, UDP, TCP
  46. IP: routing cache hash table of 512 buckets, 4Kbytes
  47. TCP: Hash tables configured (established 2048 bind 2048)
  48. NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
  49. kjournald starting.  Commit interval 5 seconds
  50. EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
  51. EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,3), internal journal
  52. EXT3-fs: mounted filesystem with ordered data mode.
  53. VFS: Mounted root (ext3 filesystem).
  54. Mounted devfs on /dev
  55. Freeing init memory: 64K
  56. BINFMT_FLAT: Loading file: /etc/rc
  57. hda: read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
  58. hda: read_intr: error=0x10 { SectorIdNotFound }, 6LBAsect=257040, sector=0
  59. hda: read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
  60. hda: read_intr: error=0x10 { SectorIdNotFound }, 6LBAsect=257040, sector=0
  61. hda: read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
  62. hda: read_intr: error=0x10 { SectorIdNotFound }, 6LBAsect=257040, sector=0
  63. hda: read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
  64. hda: read_intr: error=0x10 { SectorIdNotFound }, 6LBAsect=257040, sector=0
  65. ide0: reset: success
  66. hda: read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
  67. hda: read_intr: error=0x10 { SectorIdNotFound }, 6LBAsect=257040, sector=0
  68. hda: read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
  69. hda: read_intr: error=0x10 { SectorIdNotFound }, 6LBAsect=257040, sector=0
  70. hda: read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
  71. hda: read_intr: error=0x10 { SectorIdNotFound }, 6LBAsect=257040, sector=0
  72. hda: read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
  73. hda: read_intr: error=0x10 { SectorIdNotFound }, 6LBAsect=257040, sector=0
  74. ide0: reset: success
  75. hda: read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
  76. hda: read_intr: error=0x10 { SectorIdNotFound }, 6LBAsect=257040, sector=0
  77. end_request: I/O error, dev 03:02 (hda), sector 0
  78. FAT: Retrying with larger blocks
  79. DG: FAT!! w00t!!1

Update the Post

Either update this post and resubmit it with changes, or make a new post.

You may also comment on this post.

update paste below
details of the post (optional)

Note: Only the paste content is required, though the following information can be useful to others.

Save name / title?

(space separated, optional)



Please note that information posted here will expire by default in one month. If you do not want it to expire, please set the expiry time above. If it is set to expire, web search engines will not be allowed to index it prior to it expiring. Items that are not marked to expire will be indexable by search engines. Be careful with your passwords. All illegal activities will be reported and any information will be handed over to the authorities, so be good.

comments powered by Disqus