rendered paste bodyfernando@fernando:~$ cat /var/log/dmesg
[ 0.000000] Linux version 2.6.20-5-generic (root@vernadsky) (gcc version 4.1.2 20070105 (prerelease) (Ubuntu 4.1.1-21ubuntu6)) #2 SMP Sat Jan 6 14:50:47 UTC 2007 (Ubuntu 2.6.20-5.7-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] sanitize start
[ 0.000000] sanitize end
[ 0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009f800 end: 000000000009f800 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000000009f800 size: 0000000000000800 end: 00000000000a0000 type: 2
[ 0.000000] copy_e820_map() start: 00000000000dc000 size: 0000000000024000 end: 0000000000100000 type: 2
[ 0.000000] copy_e820_map() start: 0000000000100000 size: 000000003f5e0000 end: 000000003f6e0000 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000003f6e0000 size: 000000000000b000 end: 000000003f6eb000 type: 3
[ 0.000000] copy_e820_map() start: 000000003f6eb000 size: 0000000000015000 end: 000000003f700000 type: 4
[ 0.000000] copy_e820_map() start: 000000003f700000 size: 0000000000900000 end: 0000000040000000 type: 2
[ 0.000000] copy_e820_map() start: 00000000e0000000 size: 0000000010006000 end: 00000000f0006000 type: 2
[ 0.000000] copy_e820_map() start: 00000000f0008000 size: 0000000000004000 end: 00000000f000c000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fed20000 size: 0000000000070000 end: 00000000fed90000 type: 2
[ 0.000000] copy_e820_map() start: 00000000ff000000 size: 0000000001000000 end: 0000000100000000 type: 2
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003f6e0000 (usable)
[ 0.000000] BIOS-e820: 000000003f6e0000 - 000000003f6eb000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003f6eb000 - 000000003f700000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003f700000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0006000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0008000 - 00000000f000c000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] 118MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] Entering add_active_range(0, 0, 259808) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 259808
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 259808
[ 0.000000] On node 0 totalpages: 259808
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 237 pages used for memmap
[ 0.000000] HighMem zone: 30195 pages, LIFO batch:7
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP (v000 HP ) @ 0x000f76f0
[ 0.000000] ACPI: RSDT (v001 HP 09BC 0x06040000 LTP 0x00000000) @ 0x3f6e5204
[ 0.000000] ACPI: FADT (v001 HP 09BC 0x06040000 LOHR 0x0000005f) @ 0x3f6eae88
[ 0.000000] ACPI: MADT (v001 HP 09BC 0x06040000 LOHR 0x0000005f) @ 0x3f6eaefc
[ 0.000000] ACPI: BOOT (v001 HP 09BC 0x06040000 LTP 0x00000001) @ 0x3f6eafd8
[ 0.000000] ACPI: MCFG (v001 HP 09BC 0x06040000 LOHR 0x0000005f) @ 0x3f6eaf9c
[ 0.000000] ACPI: SSDT (v001 HP 09BC 0x00003000 INTL 0x20030224) @ 0x3f6e5660
[ 0.000000] ACPI: SSDT (v001 HP 09BC 0x00003001 INTL 0x20030224) @ 0x3f6e5488
[ 0.000000] ACPI: SSDT (v001 HP 09BC 0x00003000 INTL 0x20030224) @ 0x3f6e5374
[ 0.000000] ACPI: SSDT (v001 HP 09BC 0x00000001 INTL 0x20030224) @ 0x3f6e5248
[ 0.000000] ACPI: DSDT (v001 HP 09BC 0x06040000 MSFT 0x0100000e) @ 0x00000000
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:13 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
[ 0.000000] Detected 1596.649 MHz processor.
[ 11.559312] Built 1 zonelists. Total pages: 257779
[ 11.559316] Kernel command line: root=/dev/hda3 ro quiet splash
[ 11.559486] mapped APIC to ffffd000 (fee00000)
[ 11.559489] mapped IOAPIC to ffffc000 (fec00000)
[ 11.559492] Enabling fast FPU save and restore... done.
[ 11.559495] Enabling unmasked SIMD FPU exception support... done.
[ 11.559507] Initializing CPU#0
[ 11.559579] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 11.561474] Console: colour VGA+ 80x25
[ 11.561866] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 11.562353] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 11.597599] Memory: 1019240k/1039232k available (1958k kernel code, 19212k reserved, 874k data, 312k init, 121728k highmem)
[ 11.597610] virtual kernel memory layout:
[ 11.597611] fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB)
[ 11.597612] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 11.597614] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 11.597615] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 11.597617] .init : 0xc03cb000 - 0xc0419000 ( 312 kB)
[ 11.597618] .data : 0xc02e9b80 - 0xc03c46d4 ( 874 kB)
[ 11.597619] .text : 0xc0100000 - 0xc02e9b80 (1958 kB)
[ 11.597623] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 11.675518] Calibrating delay using timer specific routine.. 3196.30 BogoMIPS (lpj=6392615)
[ 11.675560] Security Framework v1.0.0 initialized
[ 11.675568] SELinux: Disabled at boot.
[ 11.675586] Mount-cache hash table entries: 512
[ 11.675723] CPU: After generic identify, caps: afe9fbff 00100000 00000000 00000000 00000180 00000000 00000000
[ 11.675735] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 11.675738] CPU: L2 cache: 2048K
[ 11.675741] CPU: After all inits, caps: afe9fbff 00100000 00000000 00002040 00000180 00000000 00000000
[ 11.675750] Compat vDSO mapped to ffffe000.
[ 11.675761] Checking 'hlt' instruction... OK.
[ 11.691605] SMP alternatives: switching to UP code
[ 11.691793] Freeing SMP alternatives: 11k freed
[ 11.691796] ACPI: Core revision 20060707
[ 11.723255] CPU0: Intel(R) Pentium(R) M processor 1.60GHz stepping 08
[ 11.723278] Total of 1 processors activated (3196.30 BogoMIPS).
[ 11.723466] ENABLING IO-APIC IRQs
[ 11.723662] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 11.867452] Brought up 1 CPUs
[ 11.867746] NET: Registered protocol family 16
[ 11.867829] EISA bus registered
[ 11.867833] ACPI: bus type pci registered
[ 11.867843] PCI: Using MMCONFIG
[ 11.868504] Setting up standard PCI resources
[ 11.878089] ACPI: Interpreter enabled
[ 11.878091] ACPI: Using IOAPIC for interrupt routing
[ 11.878527] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 11.878533] PCI: Probing PCI hardware (bus 00)
[ 11.879208] Boot video device is 0000:00:02.0
[ 11.879657] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[ 11.879661] PCI quirk: region 1180-11bf claimed by ICH6 GPIO
[ 11.880239] PCI: Transparent bridge - 0000:00:1e.0
[ 11.880304] PCI: Bus #07 (-#0a) is hidden behind transparent bridge #06 (-#07) (try 'pci=assign-busses')
[ 11.880307] Please report the result to linux-kernel to fix this permanently
[ 11.880337] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 11.883048] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 11.883494] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 11.884081] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 11.884312] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 11.884538] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 11.884762] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 11.884986] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 11.885210] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 11.885437] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 11.885659] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 11.888741] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 11.888749] pnp: PnP ACPI init
[ 11.891052] pnp: PnP ACPI: found 8 devices
[ 11.891056] PnPBIOS: Disabled by ACPI PNP
[ 11.891105] PCI: Using ACPI for IRQ routing
[ 11.891108] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 11.891113] PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.0
[ 11.891166] PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.0
[ 11.891214] PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.0
[ 11.891661] PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
[ 11.891668] PCI: Bridge: 0000:00:1c.0
[ 11.891670] IO window: disabled.
[ 11.891676] MEM window: disabled.
[ 11.891680] PREFETCH window: disabled.
[ 11.891688] PCI: Bus 7, cardbus bridge: 0000:06:06.0
[ 11.891690] IO window: 00003400-000034ff
[ 11.891695] IO window: 00003800-000038ff
[ 11.891700] PREFETCH window: 50000000-53ffffff
[ 11.891705] MEM window: 58000000-5bffffff
[ 11.891710] PCI: Bridge: 0000:00:1e.0
[ 11.891713] IO window: 3000-3fff
[ 11.891718] MEM window: b0100000-b01fffff
[ 11.891722] PREFETCH window: 50000000-53ffffff
[ 11.891745] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 16
[ 11.891752] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 11.891763] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 11.891777] ACPI: PCI Interrupt 0000:06:06.0[A] -> GSI 22 (level, low) -> IRQ 17
[ 11.891783] PCI: Setting latency timer of device 0000:06:06.0 to 64
[ 11.891807] NET: Registered protocol family 2
[ 11.931436] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 11.931552] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 11.932624] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 11.933357] TCP: Hash tables configured (established 131072 bind 65536)
[ 11.933361] TCP reno registered
[ 11.943554] checking if image is initramfs... it is
[ 12.607887] Freeing initrd memory: 6658k freed
[ 12.608147] Simple Boot Flag at 0x36 set to 0x1
[ 12.608386] audit: initializing netlink socket (disabled)
[ 12.608406] audit(1169543362.104:1): initialized
[ 12.608484] highmem bounce pool size: 64 pages
[ 12.608553] VFS: Disk quotas dquot_6.5.1
[ 12.608575] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 12.608636] io scheduler noop registered
[ 12.608639] io scheduler anticipatory registered
[ 12.608641] io scheduler deadline registered
[ 12.608653] io scheduler cfq registered (default)
[ 12.608945] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 12.608986] assign_interrupt_mode Found MSI capability
[ 12.609031] Allocate Port Service[0000:00:1c.0:pcie00]
[ 12.609068] Allocate Port Service[0000:00:1c.0:pcie02]
[ 12.609097] Allocate Port Service[0000:00:1c.0:pcie03]
[ 12.609250] isapnp: Scanning for PnP cards...
[ 12.963194] isapnp: No Plug & Play device found
[ 12.988705] Real Time Clock Driver v1.12ac
[ 12.988763] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 12.989451] ACPI: PCI Interrupt 0000:00:1e.3[B] -> GSI 20 (level, low) -> IRQ 18
[ 12.989462] ACPI: PCI interrupt for device 0000:00:1e.3 disabled
[ 12.989536] mice: PS/2 mouse device common for all mice
[ 12.990113] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 12.990299] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 12.990303] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 12.990537] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 12.996177] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 12.999966] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 12.999971] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 12.999973] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 12.999976] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 12.999978] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 13.000143] EISA: Probing bus 0 at eisa.0
[ 13.000152] Cannot allocate resource for EISA slot 1
[ 13.000155] Cannot allocate resource for EISA slot 2
[ 13.000157] Cannot allocate resource for EISA slot 3
[ 13.000178] EISA: Detected 0 cards.
[ 13.030270] TCP cubic registered
[ 13.030279] NET: Registered protocol family 1
[ 13.030287] NET: Registered protocol family 8
[ 13.030289] NET: Registered protocol family 20
[ 13.030362] Using IPI No-Shortcut mode
[ 13.030424] ACPI: (supports S0 S3 S4 S5)
[ 13.030655] Freeing unused kernel memory: 312k freed
[ 13.030723] Time: tsc clocksource has been installed.
[ 13.042836] input: AT Translated Set 2 keyboard as /class/input/input0
[ 13.443114] atkbd.c: Spurious NAK on isa0060/serio0. Some program might be trying access hardware directly.
[ 13.642945] atkbd.c: Spurious NAK on isa0060/serio0. Some program might be trying access hardware directly.
[ 13.842975] atkbd.c: Spurious NAK on isa0060/serio0. Some program might be trying access hardware directly.
[ 14.042722] atkbd.c: Spurious NAK on isa0060/serio0. Some program might be trying access hardware directly.
[ 14.132872] Capability LSM initialized
[ 14.164927] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3] C4[C3])
[ 14.164934] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 2.484000] ACPI: Thermal Zone [THR0] (39 C)
[ 2.488000] Time: acpi_pm clocksource has been installed.
[ 2.488000] ACPI: Invalid passive threshold
[ 2.492000] ACPI: Thermal Zone [THR1] (33 C)
[ 2.828000] usbcore: registered new interface driver usbfs
[ 2.828000] usbcore: registered new interface driver hub
[ 2.828000] usbcore: registered new device driver usb
[ 2.828000] USB Universal Host Controller Interface driver v3.0
[ 2.828000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 19
[ 2.828000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 2.828000] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.828000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 2.828000] uhci_hcd 0000:00:1d.0: irq 19, io base 0x00001820
[ 2.828000] usb usb1: configuration #1 chosen from 1 choice
[ 2.828000] hub 1-0:1.0: USB hub found
[ 2.828000] hub 1-0:1.0: 2 ports detected
[ 2.912000] ieee1394: Initialized config rom entry `ip1394'
[ 2.932000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 20
[ 2.932000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 2.932000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.932000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 2.932000] uhci_hcd 0000:00:1d.1: irq 20, io base 0x00001840
[ 2.932000] usb usb2: configuration #1 chosen from 1 choice
[ 2.932000] hub 2-0:1.0: USB hub found
[ 2.932000] hub 2-0:1.0: 2 ports detected
[ 2.952000] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 3.036000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 21
[ 3.036000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 3.036000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 3.036000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 3.036000] uhci_hcd 0000:00:1d.2: irq 21, io base 0x00001860
[ 3.036000] usb usb3: configuration #1 chosen from 1 choice
[ 3.036000] hub 3-0:1.0: USB hub found
[ 3.036000] hub 3-0:1.0: 2 ports detected
[ 3.140000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 22
[ 3.140000] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 3.140000] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 3.140000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[ 3.140000] uhci_hcd 0000:00:1d.3: irq 22, io base 0x00001880
[ 3.140000] usb usb4: configuration #1 chosen from 1 choice
[ 3.140000] hub 4-0:1.0: USB hub found
[ 3.140000] hub 4-0:1.0: 2 ports detected
[ 3.244000] ACPI: PCI Interrupt 0000:06:06.2[C] -> GSI 21 (level, low) -> IRQ 23
[ 3.292000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 19
[ 3.292000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 3.292000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 3.292000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[ 3.292000] ehci_hcd 0000:00:1d.7: debug port 1
[ 3.292000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 3.292000] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xb0040000
[ 3.296000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 3.296000] usb usb5: configuration #1 chosen from 1 choice
[ 3.296000] hub 5-0:1.0: USB hub found
[ 3.296000] hub 5-0:1.0: 8 ports detected
[ 3.300000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[23] MMIO=[b0108000-b01087ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 3.400000] 8139cp 0000:06:07.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
[ 3.400000] 8139cp 0000:06:07.0: Try the "8139too" driver instead.
[ 3.400000] 8139too Fast Ethernet driver 0.9.28
[ 3.400000] ACPI: PCI Interrupt 0000:06:07.0[A] -> GSI 20 (level, low) -> IRQ 18
[ 3.400000] eth0: RealTek RTL8139 at 0xf8874400, 00:0a:e4:d2:21:ee, IRQ 18
[ 3.400000] eth0: Identified 8139 chip type 'RTL-8100B/8139D'
[ 3.400000] ICH6: IDE controller at PCI slot 0000:00:1f.1
[ 3.400000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 21
[ 3.400000] ICH6: chipset revision 4
[ 3.400000] ICH6: not 100% native mode: will probe irqs later
[ 3.400000] ide0: BM-DMA at 0x1810-0x1817, BIOS settings: hda:DMA, hdb:DMA
[ 3.400000] Probing IDE interface ide0...
[ 3.692000] hda: FUJITSU MHT2080AT PL, ATA DISK drive
[ 4.476000] hdb: HL-DT-ST DVD-RW GCA-4080N, ATAPI CD/DVD-ROM drive
[ 4.532000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 4.540000] SCSI subsystem initialized
[ 4.544000] libata version 2.00 loaded.
[ 4.556000] hda: max request size: 128KiB
[ 4.572000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[05e40a0052345020]
[ 4.620000] hda: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=65535/16/63, UDMA(100)
[ 4.620000] hda: cache flushes supported
[ 4.620000] hda: hda1 hda2 hda3 hda4
[ 4.656000] hdb: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, DMA
[ 4.656000] Uniform CD-ROM driver Revision: 3.20
[ 5.012000] Attempting manual resume
[ 5.040000] kjournald starting. Commit interval 5 seconds
[ 5.040000] EXT3-fs: mounted filesystem with ordered data mode.
[ 20.880000] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
[ 21.824000] Linux agpgart interface v0.101 (c) Dave Jones
[ 21.832000] agpgart: Detected an Intel 915GM Chipset.
[ 21.832000] agpgart: Detected 7932K stolen memory.
[ 21.848000] agpgart: AGP aperture is 256M @ 0xc0000000
[ 21.884000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 21.928000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 22.532000] iTCO_vendor_support: vendor-support=0
[ 22.568000] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (11-Nov-2006)
[ 22.568000] iTCO_wdt: Found a ICH6-M TCO device (Version=2, TCOBASE=0x1060)
[ 22.568000] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 22.600000] Yenta: CardBus bridge found at 0000:06:06.0 [103c:3081]
[ 22.600000] Yenta: Enabling burst memory read transactions
[ 22.600000] Yenta: Using CSCINT to route CSC interrupts to PCI
[ 22.600000] Yenta: Routing CardBus interrupts to PCI
[ 22.600000] Yenta TI: socket 0000:06:06.0, mfunc 0x01aa1b02, devctl 0x64
[ 22.832000] Yenta: ISA IRQ mask 0x0cf8, PCI irq 17
[ 22.832000] Socket status: 30000820
[ 22.832000] Yenta: Raising subordinate bus# of parent bus (#06) from #07 to #0a
[ 22.832000] pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff
[ 22.832000] cs: IO port probe 0x3000-0x3fff: clean.
[ 22.832000] pcmcia: parent PCI bridge Memory window: 0xb0100000 - 0xb01fffff
[ 22.832000] pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x53ffffff
[ 22.832000] ACPI: PCI Interrupt 0000:06:06.3[A] -> GSI 22 (level, low) -> IRQ 17
[ 23.016000] input: PC Speaker as /class/input/input1
[ 23.036000] sdhci: Secure Digital Host Controller Interface driver, 0.12
[ 23.036000] sdhci: Copyright(c) Pierre Ossman
[ 23.036000] sdhci: SDHCI controller found at 0000:06:06.4 [104c:8034] (rev 0)
[ 23.036000] ACPI: PCI Interrupt 0000:06:06.4[A] -> GSI 22 (level, low) -> IRQ 17
[ 23.036000] mmc0: SDHCI at 0xb0109000 irq 17 DMA
[ 23.040000] mmc1: SDHCI at 0xb0108c00 irq 17 DMA
[ 23.040000] mmc2: SDHCI at 0xb0108800 irq 17 DMA
[ 23.076000] NET: Registered protocol family 17
[ 23.156000] intel_rng: FWH not detected
[ 23.156000] ieee80211_crypt: registered algorithm 'NULL'
[ 23.160000] ieee80211: 802.11 data/management/control stack, git-1.1.13
[ 23.160000] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[ 23.192000] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.0kmprq
[ 23.192000] ipw2200: Copyright(c) 2003-2006 Intel Corporation
[ 23.192000] ACPI: PCI Interrupt 0000:06:05.0[A] -> GSI 20 (level, low) -> IRQ 18
[ 23.192000] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
[ 23.364000] atkbd.c: Spurious NAK on isa0060/serio0. Some program might be trying access hardware directly.
[ 23.468000] pccard: CardBus card inserted into slot 0
[ 23.564000] atkbd.c: Spurious NAK on isa0060/serio0. Some program might be trying access hardware directly.
[ 23.776000] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
[ 23.956000] ipw2200: Radio Frequency Kill Switch is On:
[ 23.956000] Kill switch must be turned off for wireless networking to work.
[ 23.956000] ipw2200: Detected geography ZZM (11 802.11bg channels, 0 802.11a channels)
[ 23.960000] ACPI: PCI Interrupt 0000:00:1e.2[A] -> GSI 17 (level, low) -> IRQ 16
[ 23.960000] PCI: Setting latency timer of device 0000:00:1e.2 to 64
[ 24.004000] cs: IO port probe 0x100-0x3af: excluding 0x200-0x20f
[ 24.004000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[ 24.008000] cs: IO port probe 0x820-0x8ff: clean.
[ 24.008000] cs: IO port probe 0xc00-0xcf7: clean.
[ 24.008000] cs: IO port probe 0xa00-0xaff: clean.
[ 24.156000] input: PS/2 Mouse as /class/input/input2
[ 24.176000] input: AlpsPS/2 ALPS GlidePoint as /class/input/input3
[ 24.780000] intel8x0_measure_ac97_clock: measured 55485 usecs
[ 24.780000] intel8x0: clocking to 48000
[ 24.780000] PCI: Enabling device 0000:07:00.0 (0000 -> 0002)
[ 24.780000] ACPI: PCI Interrupt 0000:07:00.0[A] -> GSI 22 (level, low) -> IRQ 17
[ 24.780000] PCI: Setting latency timer of device 0000:07:00.0 to 64
[ 24.780000] ohci_hcd 0000:07:00.0: OHCI Host Controller
[ 24.780000] ohci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 6
[ 24.780000] ohci_hcd 0000:07:00.0: irq 17, io mem 0x58000000
[ 24.864000] usb usb6: configuration #1 chosen from 1 choice
[ 24.864000] hub 6-0:1.0: USB hub found
[ 24.864000] hub 6-0:1.0: 1 port detected
[ 24.968000] PCI: Enabling device 0000:07:00.1 (0000 -> 0002)
[ 24.968000] ACPI: PCI Interrupt 0000:07:00.1[B] -> GSI 22 (level, low) -> IRQ 17
[ 24.968000] PCI: Setting latency timer of device 0000:07:00.1 to 64
[ 24.968000] ohci_hcd 0000:07:00.1: OHCI Host Controller
[ 24.968000] ohci_hcd 0000:07:00.1: new USB bus registered, assigned bus number 7
[ 24.968000] ohci_hcd 0000:07:00.1: irq 17, io mem 0x58001000
[ 25.052000] usb usb7: configuration #1 chosen from 1 choice
[ 25.052000] hub 7-0:1.0: USB hub found
[ 25.052000] hub 7-0:1.0: 1 port detected
[ 25.452000] lp: driver loaded but no devices found
[ 25.536000] usbcore: registered new interface driver usbserial
[ 25.536000] drivers/usb/serial/usb-serial.c: USB Serial support registered for generic
[ 25.540000] usbcore: registered new interface driver usbserial_generic
[ 25.540000] drivers/usb/serial/usb-serial.c: USB Serial Driver core
[ 25.548000] drivers/usb/serial/usb-serial.c: USB Serial support registered for airprime
[ 25.548000] usbcore: registered new interface driver airprime
[ 25.580000] Adding 2506132k swap on /dev/disk/by-uuid/e4e5239c-45e7-4080-bb29-82f1bd347574. Priority:-1 extents:1 across:2506132k
[ 25.716000] EXT3 FS on hda3, internal journal
[ 26.068000] NET: Registered protocol family 10
[ 26.068000] lo: Disabled Privacy Extensions
[ 27.704000] usb 6-1: new full speed USB device using ohci_hcd and address 2
[ 27.916000] usb 6-1: configuration #1 chosen from 1 choice
[ 27.920000] airprime 6-1:1.0: airprime converter detected
[ 27.920000] usb 6-1: airprime converter now attached to ttyUSB0
[ 27.920000] usb 6-1: airprime converter now attached to ttyUSB1
[ 27.920000] usb 6-1: airprime converter now attached to ttyUSB2
[ 27.920000] airprime 6-1:1.1: airprime converter detected
[ 27.920000] usb 6-1: airprime converter now attached to ttyUSB3
[ 27.920000] usb 6-1: airprime converter now attached to ttyUSB4
[ 27.920000] usb 6-1: airprime converter now attached to ttyUSB5
[ 36.384000] eth0: no IPv6 routers present
[ 41.900000] NTFS driver 2.1.27 [Flags: R/O MODULE].
[ 41.988000] NTFS volume version 3.1.
[ 42.100000] ReiserFS: hda2: found reiserfs format "3.6" with standard journal
[ 42.100000] ReiserFS: hda2: using ordered data mode
[ 42.112000] ReiserFS: hda2: journal params: device hda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 42.112000] ReiserFS: hda2: checking transaction log (hda2)
[ 42.176000] ReiserFS: hda2: Using r5 hash to sort names