$ git log --pretty=format:"%h - %an, %ar : %s"
fc0c0dd - Bryan Mayland, 6 days ago : Merge pull request #21 from shmick/230-hotplug2-source.patch
b3a87fc - Bryan Mayland, 6 days ago : [wrt] Include current bcm2708 firmware. Thanks Steve_M!
fa89641 - Steve Mickeler, 7 days ago : add 230-hotplug2-source.patch file and enable in install.sh
1372847 - Steve Mickeler, 7 days ago : add patches/0710-brcm2708-firmware.patch to install.sh
57bc742 - Bryan Mayland, 9 days ago : [wrt] Update 8192cu README
662d5cd - Bryan Mayland, 9 days ago : [wrt] Point 8192cu to heatermeter.com source
74c92ca - Bryan Mayland, 10 days ago : [wrt] More specific svn/git repositories for BCM2708
789e19a - Bryan Mayland, 10 days ago : [wrt] Fixup luci feed definition and add hostname support to DHCP client mode
86833c8 - Bryan Mayland, 11 days ago : [lm] Fix unable to change probe type from conf page
4a574ba - Bryan Mayland, 11 days ago : [lm] HeaterMeter 20150922B 24116 bytes
86d4ffd - Bryan Mayland, 3 weeks ago : [hm] Increase UP button ADC range
83789b2 - Bryan Mayland, 4 weeks ago : [hm] Reset PID I sum to 0 if the PIDI is set to 0 because it won't be able to change otherwa156b95 - Bryan Mayland, 4 weeks ago : [hm] Remove PIDB from output calculation.
d13d4ff - Bryan Mayland, 11 days ago : [lm] Fix autobackup getting wiped on startup
bee1543 - Bryan Mayland, 11 days ago : [lm] Prevent browser hang when changing configuration multiple times without reloading the 3634a02 - Bryan Mayland, 4 weeks ago : [lm] Fix plugins not being registered after AVR reboot
774dac1 - Bryan Mayland, 4 weeks ago : [lm] Remove pidb support from conf page and index
ba4a5ed - Bryan Mayland, 5 weeks ago : [hm] Fix _fanActiveFloor not scaling up to max speed
536b97d - Bryan Mayland, 5 weeks ago : [lm] HeaterMeter 20150908B 24072 bytes
3f25404 - Bryan Mayland, 5 weeks ago : [lm] HeaterMeter 20150907B 24070 bytes
6586aff - Bryan Mayland, 5 weeks ago : [www] Do not display the peak data on the graph, just the tooltip
0ee1a83 - Bryan Mayland, 5 weeks ago : [lm] New coefficients for ET-732 and TX-1001 based on thermocouple correlation
48ed789 - Bryan Mayland, 5 weeks ago : [lm] Add config for FanActiveFloor
96436a7 - Bryan Mayland, 5 weeks ago : [hm] Add code to suppott new FanActiveFloor parameter
bc34eb3 - Bryan Mayland, 5 weeks ago : [hm] Add FanActiveFloor config item and rename all the fan/blower settings to more sane namd78269e - Bryan Mayland, 5 weeks ago : [hm] Start the servo at the first output, not sloped from min
6fd2004 - Bryan Mayland, 5 weeks ago : [hm] Delay servo pulses until it has a large change or timeout expires
f0a641c - Bryan Mayland, 4 months ago : [hm] Add 50/60Hz line noise removal
3bcfe60 - Bryan Mayland, 8 months ago : [hm] Switch to Arduino 1.6.0 compatible code
2b3537c - Bryan Mayland, 6 weeks ago : [wrt] Copy ca-certificates package from OpenWrt trunk to allow SSL http connections
eec05b9 - Bryan Mayland, 6 weeks ago : [lm] Add pushbullet support for alarms
04cc37d - Bryan Mayland, 6 weeks ago : [lm] Move the Ramp Mode config above the EMail/SMS alarm config sections
a0ea0eb - Bryan Mayland, 6 weeks ago : [lm] Oops had watch probe labeled as provider in alarms UI
89e0975 - Bryan Mayland, 6 weeks ago : [lm] Add UI to alarms page to configure ramp
a8cf1d2 - Bryan Mayland, 6 weeks ago : [lm] Stop the newMode log spam from the peaks plugin
9facdda - Bryan Mayland, 6 weeks ago : [lm] Added ramp mode linkmeterd plugin
c62a306 - Bryan Mayland, 8 weeks ago : [lm] Properly reset peaks data when restarting lmd
c893528 - Bryan Mayland, 9 weeks ago : [lm] Fix linkmeter Makefile not including plugins
4f9e0e3 - Bryan Mayland, 2 months ago : [lm] Broadcast peaks information to events every 10 seconds, show on home graph and toolti07c2159 - Bryan Mayland, 3 months ago : [lm] Whitespace reeeeeemix
81cfcc0 - Bryan Mayland, 3 months ago : [lm] Move unkprobe and dph to new plugins
8707188 - Bryan Mayland, 3 months ago : [lm] Basic plugin API for linkmeterd, allows publishing to status, and subscribing
74d1b72 - Bryan Mayland, 4 months ago : [lm] HeaterMeter 20150531 23970 bytes
edb6c81 - Bryan Mayland, 4 months ago : [www] Add option for 50/60Hz line noise removal
c30f36d - Bryan Mayland, 5 months ago : Updated README
821b1a8 - Bryan Mayland, 5 months ago : [pebble] Add pebble app v2
3de099e - Bryan Mayland, 9 months ago : [lm] Add the rest of the data from LMCF to be available in LMGT commands, such as the curr0f2cb88 - Bryan Mayland, 9 months ago : [lm] Work around root password not getting cleared on config reload
9ddd84a - Bryan Mayland, 9 months ago : [hm] Send HMRC when user selects Reset Config
219e77d - Bryan Mayland, 9 months ago : [lm] Add the ability to reset the OpenWrt configuration
7d06e4d - Bryan Mayland, 10 months ago : [hm] Prevent low current fans from turning off in voltage mode at the bottom of the PWM r6035e9d - Bryan Mayland, 10 months ago : [lm] Alarm scripts page was deleting scripts when submitting any second script
72b3617 - Bryan Mayland, 10 months ago : [wrt] Update bcm2708 firmware to support B+/A+
30b6e37 - Bryan Mayland, 10 months ago : [hm] Don't reset PID[I] when changing the I constant, it really serves no purpose but to f14d12b - Bryan Mayland, 10 months ago : [hm] Fix not selecting correct control probe on boot, PID status shows control probe now
2583392 - Bryan Mayland, 10 months ago : [hm] Optimize code of control probe to store control probe rather than calculate it all t9c42605 - Bryan Mayland, 10 months ago : [hm] Control probe is no longer TEMP_PIT, now first non-disabled probe
01ee4b8 - Bryan Mayland, 10 months ago : [eagle] Reduce resolution of boxy robot to improve silkscreen process
944ec40 - Bryan Mayland, 12 months ago : [hm] ADC actually can only do max 14 bit oversamping with 256 samples