rendered paste body[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.1.6-1-ARCH (builduser@tobias) (gcc version 5.2.0 (GCC) ) #1 SMP PREEMPT Mon Aug 17 08:52:28 CEST 2015
[ 0.000000] Command line: BOOT_IMAGE=/original/boot/vmlinuz-linux root=UUID=958fc735-c6e6-4272-93f1-0706d16e5f3d rw consoleblank=0 init=/usr/lib/systemd/systemd fbcon=scrollback:128k
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x00000000000963ff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000096400-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e8000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cffc2e3f] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cffc2e40-0x00000000cfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000012fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.5 present.
[ 0.000000] DMI: Hewlett-Packard HP xw8400 Workstation/0A08h, BIOS 786D5 v02.38 10/25/2010
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x130000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-E7FFF write-protect
[ 0.000000] E8000-EFFFF write-back
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FC0000000 write-back
[ 0.000000] 2 base 0C0000000 mask FF0000000 write-back
[ 0.000000] 3 base 100000000 mask FE0000000 write-back
[ 0.000000] 4 base 120000000 mask FF0000000 write-back
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
[ 0.000000] e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xcffc2 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fffc0-0x000fffcf] mapped at [ffff8800000fffc0]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000090000] 90000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01b2f000, 0x01b2ffff] PGTABLE
[ 0.000000] BRK [0x01b30000, 0x01b30fff] PGTABLE
[ 0.000000] BRK [0x01b31000, 0x01b31fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x12fe00000-0x12fffffff]
[ 0.000000] [mem 0x12fe00000-0x12fffffff] page 2M
[ 0.000000] BRK [0x01b32000, 0x01b32fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x120000000-0x12fdfffff]
[ 0.000000] [mem 0x120000000-0x12fdfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x11fffffff]
[ 0.000000] [mem 0x100000000-0x11fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xcffc1fff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0xcfdfffff] page 2M
[ 0.000000] [mem 0xcfe00000-0xcffc1fff] page 4k
[ 0.000000] RAMDISK: [mem 0x361bc000-0x370d5fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000E9E10 000024 (v02 COMPAQ)
[ 0.000000] ACPI: XSDT 0x00000000CFFC58EC 000064 (v01 HPQOEM SLIC-WKS 20101025 00000000)
[ 0.000000] ACPI: FACP 0x00000000CFFC5A94 0000F4 (v03 COMPAQ GREENCRK 00000001 00000000)
[ 0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Pm1aEventBlock: 32/16 (20150410/tbfadt-623)
[ 0.000000] ACPI BIOS Warning (bug): 32/64X address mismatch in FADT/Gpe0Block: 0x0000F828/0x000000000001F030, using 64-bit address (20150410/tbfadt-588)
[ 0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20150410/tbfadt-623)
[ 0.000000] ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aEventBlock: 16, using default 32 (20150410/tbfadt-704)
[ 0.000000] ACPI: DSDT 0x00000000CFFC5EE2 0021A1 (v01 COMPAQ DSDT 00000001 MSFT 0100000E)
[ 0.000000] ACPI: FACS 0x00000000CFFC5800 000040
[ 0.000000] ACPI: FACS 0x00000000CFFC5800 000040
[ 0.000000] ACPI: SSDT 0x00000000CFFC8083 00735B (v01 COMPAQ PROJECT 00000001 MSFT 0100000E)
[ 0.000000] ACPI: APIC 0x00000000CFFC5B88 0000D4 (v01 COMPAQ GREENCRK 00000001 00000000)
[ 0.000000] ACPI: ASF! 0x00000000CFFC5C5C 00006A (v32 COMPAQ GREENCRK 00000001 00000000)
[ 0.000000] ACPI: MCFG 0x00000000CFFC5CC6 00003C (v01 COMPAQ GREENCRK 00000001 00000000)
[ 0.000000] ACPI: TCPA 0x00000000CFFC5EB0 000032 (v01 COMPAQ GREENCRK 00000001 00000000)
[ 0.000000] ACPI: SLIC 0x00000000CFFC5D02 000176 (v01 HPQOEM SLIC-WKS 00000001 00000000)
[ 0.000000] ACPI: HPET 0x00000000CFFC5E78 000038 (v01 COMPAQ GREENCRK 00000001 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000012fffffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x12fff8000-0x12fffbfff]
[ 0.000000] [ffffea0000000000-ffffea0004bfffff] PMD -> [ffff88012b600000-ffff88012f5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000012fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000095fff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000cffc1fff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000012fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000012fffffff]
[ 0.000000] On node 0 totalpages: 1048407
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3989 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 13248 pages used for memmap
[ 0.000000] DMA32 zone: 847810 pages, LIFO batch:31
[ 0.000000] Normal zone: 3072 pages used for memmap
[ 0.000000] Normal zone: 196608 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0xf808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] IOAPIC[1]: apic_id 2, version 32, address 0xfec10000, GSI 24-47
[ 0.000000] IOAPIC[2]: apic_id 3, version 32, address 0xfec80000, GSI 48-71
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00096000-0x00096fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00097000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e7fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e8000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcffc2000-0xcffc2fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcffc3000-0xcfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xffffffff]
[ 0.000000] e820: [mem 0xd0000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 33 pages/cpu @ffff88012fc00000 s95576 r8192 d31400 u262144
[ 0.000000] pcpu-alloc: s95576 r8192 d31400 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1032002
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/original/boot/vmlinuz-linux root=UUID=958fc735-c6e6-4272-93f1-0706d16e5f3d rw consoleblank=0 init=/usr/lib/systemd/systemd fbcon=scrollback:128k
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 4033680K/4193628K available (5699K kernel code, 893K rwdata, 1732K rodata, 1180K init, 1152K bss, 159948K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.000000] NR_IRQS:8448 nr_irqs:1304 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1995.040 MHz processor
[ 0.003349] Calibrating delay loop (skipped), value calculated using timer frequency.. 3991.33 BogoMIPS (lpj=6650133)
[ 0.003354] pid_max: default: 32768 minimum: 301
[ 0.003365] ACPI: Core revision 20150410
[ 0.008064] ACPI: All ACPI Tables successfully acquired
[ 0.008100] Security Framework initialized
[ 0.008112] Yama: becoming mindful.
[ 0.008542] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.010605] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.011597] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.011607] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.011982] Initializing cgroup subsys blkio
[ 0.011989] Initializing cgroup subsys memory
[ 0.012004] Initializing cgroup subsys devices
[ 0.012007] Initializing cgroup subsys freezer
[ 0.012011] Initializing cgroup subsys net_cls
[ 0.012042] CPU: Physical Processor ID: 0
[ 0.012044] CPU: Processor Core ID: 0
[ 0.012047] mce: CPU supports 6 MCE banks
[ 0.012055] CPU0: Thermal monitoring enabled (TM2)
[ 0.012059] process: using mwait in idle threads
[ 0.012065] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[ 0.012066] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[ 0.012214] Freeing SMP alternatives memory: 20K (ffffffff81a08000 - ffffffff81a0d000)
[ 0.016674] ftrace: allocating 21563 entries in 85 pages
[ 0.027380] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.063333] smpboot: CPU0: Intel(R) Xeon(R) CPU E5335 @ 2.00GHz (fam: 06, model: 0f, stepping: 07)
[ 0.063333] Performance Events: PEBS fmt0-, 4-deep LBR, Core2 events, Intel PMU driver.
[ 0.063333] perf_event_intel: PEBS disabled due to CPU errata
[ 0.063333] ... version: 2
[ 0.063333] ... bit width: 40
[ 0.063333] ... generic registers: 2
[ 0.063333] ... value mask: 000000ffffffffff
[ 0.063333] ... max period: 000000007fffffff
[ 0.063333] ... fixed-purpose events: 3
[ 0.063333] ... event mask: 0000000700000003
[ 0.083416] x86: Booting SMP configuration:
[ 0.083420] .... node #0, CPUs: #1
[ 0.180202] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.186744] #2 #3 #4 #5 #6 #7
[ 0.273203] x86: Booted up 1 node, 8 CPUs
[ 0.273209] smpboot: Total of 8 processors activated (31933.49 BogoMIPS)
[ 0.273606] devtmpfs: initialized
[ 0.279298] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ 0.279298] pinctrl core: initialized pinctrl subsystem
[ 0.279298] RTC time: 23:38:32, date: 09/11/15
[ 0.279298] NET: Registered protocol family 16
[ 0.293339] cpuidle: using governor ladder
[ 0.306671] cpuidle: using governor menu
[ 0.306707] ACPI: bus type PCI registered
[ 0.306710] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.306807] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xe0000000-0xe7ffffff] (base 0xe0000000)
[ 0.306811] PCI: MMCONFIG at [mem 0xe0000000-0xe7ffffff] reserved in E820
[ 0.307084] PCI: Using configuration type 1 for base access
[ 0.307491] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.307493] mtrr: probably your BIOS does not setup all CPUs.
[ 0.307494] mtrr: corrected configuration.
[ 0.320097] ACPI: Added _OSI(Module Device)
[ 0.320100] ACPI: Added _OSI(Processor Device)
[ 0.320102] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.320104] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.321044] ACPI Error: Illegal I/O port address/length above 64K: 000000000001F034/0x1 (20150410/hwvalid-155)
[ 0.321051] ACPI Exception: AE_LIMIT, Could not create GPE Block 0 (20150410/evgpeinit-143)
[ 0.324522] ACPI: Interpreter enabled
[ 0.324535] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150410/hwxface-580)
[ 0.324552] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.324554] ACPI: Using IOAPIC for interrupt routing
[ 0.324584] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.330062] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.330071] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.330078] ACPI BIOS Error (bug): \_SB_.PCI0._OSC: Excess arguments - ASL declared 5, ACPI requires 4 (20150410/nsarguments-189)
[ 0.330136] ACPI Error: [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS (20150410/dsfield-211)
[ 0.330143] ACPI Error: Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff88012b0a1348), AE_ALREADY_EXISTS (20150410/psparse-536)
[ 0.330155] acpi PNP0A08:00: _OSC failed (AE_ALREADY_EXISTS); disabling ASPM
[ 0.330257] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-7f] only partially covers this bridge
[ 0.330442] PCI host bridge to bus 0000:00
[ 0.330446] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.330449] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.330452] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xdfffffff window]
[ 0.330455] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff window]
[ 0.330458] pci_bus 0000:00: root bus resource [mem 0xfed00000-0xfed003ff window]
[ 0.330460] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
[ 0.330463] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.330466] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.330479] pci 0000:00:00.0: [8086:25c0] type 00 class 0x060000
[ 0.330532] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[ 0.330635] pci 0000:00:02.0: [8086:25e2] type 01 class 0x060400
[ 0.330679] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.330727] pci 0000:00:02.0: System wakeup disabled by ACPI
[ 0.330793] pci 0000:00:03.0: [8086:25e3] type 01 class 0x060400
[ 0.330837] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 0.330884] pci 0000:00:03.0: System wakeup disabled by ACPI
[ 0.330947] pci 0000:00:04.0: [8086:25fa] type 01 class 0x060400
[ 0.330991] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[ 0.331035] pci 0000:00:04.0: System wakeup disabled by ACPI
[ 0.331099] pci 0000:00:05.0: [8086:25e5] type 01 class 0x060400
[ 0.331142] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[ 0.331239] pci 0000:00:06.0: [8086:25e6] type 01 class 0x060400
[ 0.331283] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[ 0.331381] pci 0000:00:07.0: [8086:25e7] type 01 class 0x060400
[ 0.331424] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 0.331522] pci 0000:00:10.0: [8086:25f0] type 00 class 0x060000
[ 0.331626] pci 0000:00:10.1: [8086:25f0] type 00 class 0x060000
[ 0.332029] pci 0000:00:10.2: [8086:25f0] type 00 class 0x060000
[ 0.332139] pci 0000:00:11.0: [8086:25f1] type 00 class 0x060000
[ 0.332244] pci 0000:00:13.0: [8086:25f3] type 00 class 0x060000
[ 0.332348] pci 0000:00:15.0: [8086:25f5] type 00 class 0x060000
[ 0.332452] pci 0000:00:16.0: [8086:25f6] type 00 class 0x060000
[ 0.332569] pci 0000:00:1b.0: [8086:269a] type 00 class 0x040300
[ 0.332588] pci 0000:00:1b.0: reg 0x10: [mem 0xf0e00000-0xf0e03fff 64bit]
[ 0.332660] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.332760] pci 0000:00:1c.0: [8086:2690] type 01 class 0x060400
[ 0.332829] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.332877] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.332947] pci 0000:00:1d.0: [8086:2688] type 00 class 0x0c0300
[ 0.332989] pci 0000:00:1d.0: reg 0x20: [io 0x3000-0x301f]
[ 0.333055] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.333115] pci 0000:00:1d.1: [8086:2689] type 00 class 0x0c0300
[ 0.333156] pci 0000:00:1d.1: reg 0x20: [io 0x3020-0x303f]
[ 0.333222] pci 0000:00:1d.1: System wakeup disabled by ACPI
[ 0.333283] pci 0000:00:1d.2: [8086:268a] type 00 class 0x0c0300
[ 0.333325] pci 0000:00:1d.2: reg 0x20: [io 0x3040-0x305f]
[ 0.333397] pci 0000:00:1d.2: System wakeup disabled by ACPI
[ 0.333460] pci 0000:00:1d.3: [8086:268b] type 00 class 0x0c0300
[ 0.333501] pci 0000:00:1d.3: reg 0x20: [io 0x3060-0x307f]
[ 0.333567] pci 0000:00:1d.3: System wakeup disabled by ACPI
[ 0.333634] pci 0000:00:1d.7: [8086:268c] type 00 class 0x0c0320
[ 0.333652] pci 0000:00:1d.7: reg 0x10: [mem 0xf0e04000-0xf0e043ff]
[ 0.333731] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.333777] pci 0000:00:1d.7: System wakeup disabled by ACPI
[ 0.333839] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 0.333932] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 0.333994] pci 0000:00:1f.0: [8086:2670] type 00 class 0x060100
[ 0.334159] pci 0000:00:1f.1: [8086:269e] type 00 class 0x01018a
[ 0.334174] pci 0000:00:1f.1: reg 0x10: [io 0x30d0-0x30d7]
[ 0.334184] pci 0000:00:1f.1: reg 0x14: [io 0x30f0-0x30f3]
[ 0.334194] pci 0000:00:1f.1: reg 0x18: [io 0x30d8-0x30df]
[ 0.334204] pci 0000:00:1f.1: reg 0x1c: [io 0x30f4-0x30f7]
[ 0.334214] pci 0000:00:1f.1: reg 0x20: [io 0x30c0-0x30cf]
[ 0.334235] pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.334237] pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.334240] pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.334242] pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.334335] pci 0000:00:1f.2: [8086:2682] type 00 class 0x010400
[ 0.334351] pci 0000:00:1f.2: reg 0x10: [io 0x30e0-0x30e7]
[ 0.334360] pci 0000:00:1f.2: reg 0x14: [io 0x30f8-0x30fb]
[ 0.334369] pci 0000:00:1f.2: reg 0x18: [io 0x30e8-0x30ef]
[ 0.334378] pci 0000:00:1f.2: reg 0x1c: [io 0x30fc-0x30ff]
[ 0.334386] pci 0000:00:1f.2: reg 0x20: [io 0x3080-0x309f]
[ 0.334396] pci 0000:00:1f.2: reg 0x24: [mem 0xf0e04400-0xf0e047ff]
[ 0.334429] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.335197] pci 0000:10:00.0: [8086:3500] type 01 class 0x060400
[ 0.338890] pci 0000:10:00.0: PME# supported from D0 D3hot D3cold
[ 0.340067] pci 0000:10:00.3: [8086:350c] type 01 class 0x060400
[ 0.344074] pci 0000:10:00.3: PME# supported from D0 D3hot D3cold
[ 0.344629] pci 0000:10:00.3: System wakeup disabled by ACPI
[ 0.345017] pci 0000:10:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.345356] pci 0000:00:02.0: PCI bridge to [bus 10-20]
[ 0.345361] pci 0000:00:02.0: bridge window [io 0x2000-0x2fff]
[ 0.345365] pci 0000:00:02.0: bridge window [mem 0xf0a00000-0xf0cfffff]
[ 0.347340] pci 0000:1e:00.0: [8086:3510] type 01 class 0x060400
[ 0.351482] pci 0000:1e:00.0: PME# supported from D0 D3hot D3cold
[ 0.352102] pci 0000:1e:00.0: System wakeup disabled by ACPI
[ 0.352156] pci 0000:1e:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.352695] pci 0000:1e:01.0: [8086:3514] type 01 class 0x060400
[ 0.356801] pci 0000:1e:01.0: PME# supported from D0 D3hot D3cold
[ 0.357355] pci 0000:1e:01.0: System wakeup disabled by ACPI
[ 0.357475] pci 0000:1e:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.359496] pci 0000:10:00.0: PCI bridge to [bus 1e-20]
[ 0.359766] pci 0000:10:00.0: bridge window [mem 0xf0a00000-0xf0afffff]
[ 0.361752] pci 0000:1e:00.0: PCI bridge to [bus 20]
[ 0.364681] pci 0000:1f:00.0: [14e4:1600] type 00 class 0x020000
[ 0.365759] pci 0000:1f:00.0: reg 0x10: [mem 0xf0a00000-0xf0a0ffff 64bit]
[ 0.370876] pci 0000:1f:00.0: PME# supported from D3hot D3cold
[ 0.371449] pci 0000:1f:00.0: System wakeup disabled by ACPI
[ 0.371549] pci 0000:1f:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.371886] pci 0000:1e:01.0: PCI bridge to [bus 1f]
[ 0.372155] pci 0000:1e:01.0: bridge window [mem 0xf0a00000-0xf0afffff]
[ 0.375826] pci 0000:11:06.0: [1000:0050] type 00 class 0x010000
[ 0.376801] pci 0000:11:06.0: reg 0x10: [io 0x2000-0x20ff]
[ 0.377542] pci 0000:11:06.0: reg 0x14: [mem 0xf0b10000-0xf0b13fff 64bit]
[ 0.378283] pci 0000:11:06.0: reg 0x1c: [mem 0xf0b00000-0xf0b0ffff 64bit]
[ 0.379227] pci 0000:11:06.0: reg 0x30: [mem 0x00000000-0x000fffff pref]
[ 0.381347] pci 0000:11:06.0: supports D1 D2
[ 0.383400] pci 0000:10:00.3: PCI bridge to [bus 11]
[ 0.383535] pci 0000:10:00.3: bridge window [io 0x2000-0x2fff]
[ 0.383669] pci 0000:10:00.3: bridge window [mem 0xf0b00000-0xf0bfffff]
[ 0.384776] pci 0000:60:00.0: [15b3:634a] type 00 class 0x0c0600
[ 0.385024] pci 0000:60:00.0: reg 0x10: [mem 0xf0800000-0xf08fffff 64bit]
[ 0.385201] pci 0000:60:00.0: reg 0x18: [mem 0xf0000000-0xf07fffff 64bit pref]
[ 0.386132] pci 0000:60:00.0: System wakeup disabled by ACPI
[ 0.390068] pci 0000:00:03.0: PCI bridge to [bus 60]
[ 0.390074] pci 0000:00:03.0: bridge window [mem 0xf0800000-0xf08fffff]
[ 0.390079] pci 0000:00:03.0: bridge window [mem 0xf0000000-0xf07fffff 64bit pref]
[ 0.390154] pci 0000:40:00.0: [1002:7153] type 00 class 0x030000
[ 0.390171] pci 0000:40:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.390183] pci 0000:40:00.0: reg 0x18: [mem 0xf0900000-0xf090ffff 64bit]
[ 0.390192] pci 0000:40:00.0: reg 0x20: [io 0x1000-0x10ff]
[ 0.390207] pci 0000:40:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[ 0.390239] pci 0000:40:00.0: supports D1 D2
[ 0.390279] pci 0000:40:00.0: System wakeup disabled by ACPI
[ 0.390345] pci 0000:40:00.1: [1002:7173] type 00 class 0x038000
[ 0.390361] pci 0000:40:00.1: reg 0x10: [mem 0xf0910000-0xf091ffff 64bit]
[ 0.390418] pci 0000:40:00.1: supports D1 D2
[ 0.390477] pci 0000:40:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.390487] pci 0000:00:04.0: PCI bridge to [bus 40]
[ 0.390491] pci 0000:00:04.0: bridge window [io 0x1000-0x1fff]
[ 0.390495] pci 0000:00:04.0: bridge window [mem 0xf0900000-0xf09fffff]
[ 0.390500] pci 0000:00:04.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.390547] pci 0000:00:05.0: PCI bridge to [bus fe]
[ 0.390597] pci 0000:00:06.0: PCI bridge to [bus fd]
[ 0.390646] pci 0000:00:07.0: PCI bridge to [bus fc]
[ 0.390729] pci 0000:08:00.0: [8086:032c] type 01 class 0x060400
[ 0.390750] pci 0000:08:00.0: PXH quirk detected; SHPC device MSI disabled
[ 0.390830] pci 0000:08:00.0: PME# supported from D0 D3hot D3cold
[ 0.390860] pci 0000:08:00.0: System wakeup disabled by ACPI
[ 0.390923] pci 0000:08:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.390933] pci 0000:00:1c.0: PCI bridge to [bus 08-09]
[ 0.391060] pci 0000:08:00.0: PCI bridge to [bus 09]
[ 0.391160] pci 0000:01:05.0: [104c:8023] type 00 class 0x0c0010
[ 0.391178] pci 0000:01:05.0: reg 0x10: [mem 0xf0d04000-0xf0d047ff]
[ 0.391190] pci 0000:01:05.0: reg 0x14: [mem 0xf0d00000-0xf0d03fff]
[ 0.391262] pci 0000:01:05.0: supports D1 D2
[ 0.391265] pci 0000:01:05.0: PME# supported from D0 D1 D2 D3hot
[ 0.391376] pci 0000:00:1e.0: PCI bridge to [bus 01] (subtractive decode)
[ 0.391383] pci 0000:00:1e.0: bridge window [mem 0xf0d00000-0xf0dfffff]
[ 0.391390] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.391393] pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xdfffffff window] (subtractive decode)
[ 0.391395] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfebfffff window] (subtractive decode)
[ 0.391398] pci 0000:00:1e.0: bridge window [mem 0xfed00000-0xfed003ff window] (subtractive decode)
[ 0.391401] pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff window] (subtractive decode)
[ 0.391406] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.391409] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.392652] ACPI: PCI Interrupt Link [LNKA] (IRQs *3 4 5 6 7 10 11 14 15)
[ 0.392723] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 14 15)
[ 0.392792] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 14 15)
[ 0.392860] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 14 15)
[ 0.392928] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
[ 0.392997] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 14 15)
[ 0.393065] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
[ 0.393134] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 14 15)
[ 0.393399] vgaarb: setting as boot device: PCI:0000:40:00.0
[ 0.393399] vgaarb: device added: PCI:0000:40:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.393399] vgaarb: loaded
[ 0.393399] vgaarb: bridge control possible 0000:40:00.0
[ 0.393440] PCI: Using ACPI for IRQ routing
[ 0.409316] PCI: pci_cache_line_size set to 64 bytes
[ 0.410106] e820: reserve RAM buffer [mem 0x00096400-0x0009ffff]
[ 0.410108] e820: reserve RAM buffer [mem 0xcffc2e40-0xcfffffff]
[ 0.410280] NetLabel: Initializing
[ 0.410283] NetLabel: domain hash size = 128
[ 0.410284] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.410306] NetLabel: unlabeled traffic allowed by default
[ 0.410330] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.410334] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.410339] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.412363] Switched to clocksource hpet
[ 0.419135] pnp: PnP ACPI init
[ 0.419328] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.419378] pnp 00:01: Plug and Play ACPI device, IDs PNP0f13 PNP0f0e (active)
[ 0.419421] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.419684] pnp 00:03: [dma 3]
[ 0.419770] pnp 00:03: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.420061] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 PNP0500 (active)
[ 0.420232] pnp 00:05: [dma 2]
[ 0.420275] pnp 00:05: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.420412] system 00:06: [io 0x04d0-0x04d1] has been reserved
[ 0.420418] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.420511] system 00:07: [io 0x0400-0x041f] has been reserved
[ 0.420515] system 00:07: [io 0x0420-0x043f] has been reserved
[ 0.420518] system 00:07: [io 0x0440-0x045f] has been reserved
[ 0.420520] system 00:07: [io 0x0460-0x047f] has been reserved
[ 0.420524] system 00:07: [io 0x0480-0x048f] has been reserved
[ 0.420527] system 00:07: [io 0x0490-0x049f] has been reserved
[ 0.420530] system 00:07: [io 0xf800-0xf81f] could not be reserved
[ 0.420533] system 00:07: [io 0xf820-0xf83f] has been reserved
[ 0.420536] system 00:07: [io 0xf840-0xf85f] has been reserved
[ 0.420539] system 00:07: [io 0xf860-0xf87f] has been reserved
[ 0.420542] system 00:07: [io 0xfa00-0xfa3f] has been reserved
[ 0.420545] system 00:07: [io 0xfc00-0xfc7f] has been reserved
[ 0.420548] system 00:07: [io 0xfc80-0xfcff] has been reserved
[ 0.420551] system 00:07: [io 0xfe00-0xfe7f] has been reserved
[ 0.420554] system 00:07: [io 0xfe80-0xfeff] has been reserved
[ 0.420558] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.420627] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.420631] system 00:08: [mem 0xffe00000-0xffffffff] has been reserved
[ 0.420634] system 00:08: [mem 0xfee00000-0xfeefffff] has been reserved
[ 0.420637] system 00:08: [mem 0xfe700000-0xfe7003ff] has been reserved
[ 0.420640] system 00:08: [mem 0xfe600000-0xfe6fffff] has been reserved
[ 0.420643] system 00:08: [mem 0xfe000000-0xfe01ffff] has been reserved
[ 0.420647] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.420858] pnp 00:09: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:11:06.0 BAR 6 [mem 0x00000000-0x000fffff pref]
[ 0.420863] pnp 00:09: disabling [mem 0x000c0000-0x000e7fff] because it overlaps 0000:11:06.0 BAR 6 [mem 0x00000000-0x000fffff pref]
[ 0.420866] pnp 00:09: disabling [mem 0x000e8000-0x000effff] because it overlaps 0000:11:06.0 BAR 6 [mem 0x00000000-0x000fffff pref]
[ 0.420870] pnp 00:09: disabling [mem 0x000f0000-0x000fffff] because it overlaps 0000:11:06.0 BAR 6 [mem 0x00000000-0x000fffff pref]
[ 0.420910] system 00:09: [mem 0x00100000-0xcfffffff] could not be reserved
[ 0.420914] system 00:09: [mem 0xfeda0000-0xfedbffff] has been reserved
[ 0.420918] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.421013] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.421017] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.421029] pnp: PnP ACPI: found 11 devices
[ 0.428972] clocksource acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.430588] pci 0000:1e:00.0: PCI bridge to [bus 20]
[ 0.431145] pci 0000:1e:01.0: PCI bridge to [bus 1f]
[ 0.431347] pci 0000:1e:01.0: bridge window [mem 0xf0a00000-0xf0afffff]
[ 0.431752] pci 0000:10:00.0: PCI bridge to [bus 1e-20]
[ 0.431953] pci 0000:10:00.0: bridge window [mem 0xf0a00000-0xf0afffff]
[ 0.432362] pci 0000:11:06.0: BAR 6: no space for [mem size 0x00100000 pref]
[ 0.432366] pci 0000:11:06.0: BAR 6: failed to assign [mem size 0x00100000 pref]
[ 0.432369] pci 0000:10:00.3: PCI bridge to [bus 11]
[ 0.432425] pci 0000:10:00.3: bridge window [io 0x2000-0x2fff]
[ 0.432627] pci 0000:10:00.3: bridge window [mem 0xf0b00000-0xf0bfffff]
[ 0.433032] pci 0000:00:02.0: PCI bridge to [bus 10-20]
[ 0.433035] pci 0000:00:02.0: bridge window [io 0x2000-0x2fff]
[ 0.433039] pci 0000:00:02.0: bridge window [mem 0xf0a00000-0xf0cfffff]
[ 0.433046] pci 0000:00:03.0: PCI bridge to [bus 60]
[ 0.433051] pci 0000:00:03.0: bridge window [mem 0xf0800000-0xf08fffff]
[ 0.433055] pci 0000:00:03.0: bridge window [mem 0xf0000000-0xf07fffff 64bit pref]
[ 0.433061] pci 0000:40:00.0: BAR 6: assigned [mem 0xf0920000-0xf093ffff pref]
[ 0.433065] pci 0000:00:04.0: PCI bridge to [bus 40]
[ 0.433068] pci 0000:00:04.0: bridge window [io 0x1000-0x1fff]
[ 0.433073] pci 0000:00:04.0: bridge window [mem 0xf0900000-0xf09fffff]
[ 0.433077] pci 0000:00:04.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.433082] pci 0000:00:05.0: PCI bridge to [bus fe]
[ 0.433091] pci 0000:00:06.0: PCI bridge to [bus fd]
[ 0.433099] pci 0000:00:07.0: PCI bridge to [bus fc]
[ 0.433108] pci 0000:08:00.0: PCI bridge to [bus 09]
[ 0.433121] pci 0000:00:1c.0: PCI bridge to [bus 08-09]
[ 0.433133] pci 0000:00:1e.0: PCI bridge to [bus 01]
[ 0.433138] pci 0000:00:1e.0: bridge window [mem 0xf0d00000-0xf0dfffff]
[ 0.433147] pci_bus 0000:00: resource 4 [mem 0x000a0000-0x000bffff window]
[ 0.433150] pci_bus 0000:00: resource 5 [mem 0xd0000000-0xdfffffff window]
[ 0.433153] pci_bus 0000:00: resource 6 [mem 0xf0000000-0xfebfffff window]
[ 0.433156] pci_bus 0000:00: resource 7 [mem 0xfed00000-0xfed003ff window]
[ 0.433158] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff window]
[ 0.433161] pci_bus 0000:00: resource 9 [io 0x0000-0x0cf7 window]
[ 0.433164] pci_bus 0000:00: resource 10 [io 0x0d00-0xffff window]
[ 0.433167] pci_bus 0000:10: resource 0 [io 0x2000-0x2fff]
[ 0.433170] pci_bus 0000:10: resource 1 [mem 0xf0a00000-0xf0cfffff]
[ 0.433173] pci_bus 0000:1e: resource 1 [mem 0xf0a00000-0xf0afffff]
[ 0.433176] pci_bus 0000:1f: resource 1 [mem 0xf0a00000-0xf0afffff]
[ 0.433178] pci_bus 0000:11: resource 0 [io 0x2000-0x2fff]
[ 0.433181] pci_bus 0000:11: resource 1 [mem 0xf0b00000-0xf0bfffff]
[ 0.433184] pci_bus 0000:60: resource 1 [mem 0xf0800000-0xf08fffff]
[ 0.433187] pci_bus 0000:60: resource 2 [mem 0xf0000000-0xf07fffff 64bit pref]
[ 0.433190] pci_bus 0000:40: resource 0 [io 0x1000-0x1fff]
[ 0.433192] pci_bus 0000:40: resource 1 [mem 0xf0900000-0xf09fffff]
[ 0.433195] pci_bus 0000:40: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.433199] pci_bus 0000:01: resource 1 [mem 0xf0d00000-0xf0dfffff]
[ 0.433201] pci_bus 0000:01: resource 4 [mem 0x000a0000-0x000bffff window]
[ 0.433204] pci_bus 0000:01: resource 5 [mem 0xd0000000-0xdfffffff window]
[ 0.433207] pci_bus 0000:01: resource 6 [mem 0xf0000000-0xfebfffff window]
[ 0.433210] pci_bus 0000:01: resource 7 [mem 0xfed00000-0xfed003ff window]
[ 0.433213] pci_bus 0000:01: resource 8 [mem 0xfed40000-0xfed44fff window]
[ 0.433215] pci_bus 0000:01: resource 9 [io 0x0000-0x0cf7 window]
[ 0.433218] pci_bus 0000:01: resource 10 [io 0x0d00-0xffff window]
[ 0.433271] NET: Registered protocol family 2
[ 0.433564] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.433724] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.433943] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.434006] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.434041] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.434139] NET: Registered protocol family 1
[ 0.436291] pci 0000:00:1f.0: rerouting interrupts for [8086:2670]
[ 0.436660] pci 0000:40:00.0: Video device with shadowed ROM
[ 0.436681] pci 0000:08:00.0: rerouting interrupts for [8086:032c]
[ 0.436688] PCI: CLS 64 bytes, default 64
[ 0.436768] Unpacking initramfs...
[ 0.780471] Freeing initrd memory: 15464K (ffff8800361bc000 - ffff8800370d6000)
[ 0.780487] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.780491] software IO TLB [mem 0xcbfc2000-0xcffc2000] (64MB) mapped at [ffff8800cbfc2000-ffff8800cffc1fff]
[ 0.780744] microcode: CPU0 sig=0x6f7, pf=0x40, revision=0x6b
[ 0.780759] microcode: CPU1 sig=0x6f7, pf=0x40, revision=0x6b
[ 0.780778] microcode: CPU2 sig=0x6f7, pf=0x40, revision=0x6b
[ 0.780799] microcode: CPU3 sig=0x6f7, pf=0x40, revision=0x6b
[ 0.780813] microcode: CPU4 sig=0x6f7, pf=0x40, revision=0x6b
[ 0.780823] microcode: CPU5 sig=0x6f7, pf=0x40, revision=0x6b
[ 0.780835] microcode: CPU6 sig=0x6f7, pf=0x40, revision=0x6b
[ 0.780846] microcode: CPU7 sig=0x6f7, pf=0x40, revision=0x6b
[ 0.780967] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.781048] Scanning for low memory corruption every 60 seconds
[ 0.781564] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.781606] Initialise system trusted keyring
[ 0.782100] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.784697] zpool: loaded
[ 0.784701] zbud: loaded
[ 0.784900] VFS: Disk quotas dquot_6.6.0
[ 0.784959] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.785209] Key type big_key registered
[ 0.785530] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.785607] io scheduler noop registered
[ 0.785611] io scheduler deadline registered
[ 0.785663] io scheduler cfq registered (default)
[ 0.792260] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.792285] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.792304] vesafb: mode is 640x480x32, linelength=2560, pages=0
[ 0.792306] vesafb: scrolling: redraw
[ 0.792308] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[ 0.792326] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90000800000, using 1216k, total 1216k
[ 0.812916] Console: switching to colour frame buffer device 80x30
[ 0.833386] fb0: VESA VGA frame buffer device
[ 0.833413] intel_idle: does not run on family 6 model 15
[ 0.833454] GHES: HEST is not enabled!
[ 0.833537] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.854090] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.854613] Linux agpgart interface v0.103
[ 0.855445] rtc_cmos 00:00: RTC can wake from S4
[ 0.855583] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
[ 0.855614] rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.855635] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.856116] NET: Registered protocol family 10
[ 0.856419] NET: Registered protocol family 17
[ 0.856998] Loading compiled-in X.509 certificates
[ 0.857015] registered taskstats version 1
[ 0.860547] Magic number: 15:865:655
[ 0.860690] rtc_cmos 00:00: setting system clock to 2015-09-11 23:38:32 UTC (1442014712)
[ 0.860788] PM: Hibernation image not present or could not be loaded.
[ 0.861475] Freeing unused kernel memory: 1180K (ffffffff818e1000 - ffffffff81a08000)
[ 0.861479] Write protecting the kernel read-only data: 8192k
[ 0.861888] Freeing unused kernel memory: 432K (ffff880001594000 - ffff880001600000)
[ 0.862091] Freeing unused kernel memory: 316K (ffff8800017b1000 - ffff880001800000)
[ 0.872792] random: systemd-tmpfile urandom read with 2 bits of entropy available
[ 0.883308] [drm] Initialized drm 1.1.0 20060810
[ 0.893331] [drm] radeon kernel modesetting enabled.
[ 0.894733] checking generic (d0000000 130000) vs hw (d0000000 10000000)
[ 0.894736] fb: switching to radeondrmfb from VESA VGA
[ 0.894768] Console: switching to colour dummy device 80x25
[ 0.895322] [drm] initializing kernel modesetting (RV515 0x1002:0x7153 0x1002:0x1B02).
[ 0.895342] [drm] register mmio base: 0xF0900000
[ 0.895344] [drm] register mmio size: 65536
[ 0.895463] ATOM BIOS: A77607
[ 0.895492] [drm] Generation 2 PCI interface, using max accessible memory
[ 0.895499] radeon 0000:40:00.0: VRAM: 256M 0x0000000000000000 - 0x000000000FFFFFFF (256M used)
[ 0.895503] radeon 0000:40:00.0: GTT: 512M 0x0000000010000000 - 0x000000002FFFFFFF
[ 0.895522] [drm] Detected VRAM RAM=256M, BAR=256M
[ 0.895524] [drm] RAM width 128bits DDR
[ 0.895614] [TTM] Zone kernel: Available graphics memory: 2025546 kiB
[ 0.895616] [TTM] Initializing pool allocator
[ 0.895625] [TTM] Initializing DMA pool allocator
[ 0.895667] [drm] radeon: 256M of VRAM memory ready
[ 0.895669] [drm] radeon: 512M of GTT memory ready.
[ 0.895703] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 0.903682] [drm] radeon: 1 quad pipes, 1 z pipes initialized.
[ 0.904292] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
[ 0.904321] radeon 0000:40:00.0: WB enabled
[ 0.904326] radeon 0000:40:00.0: fence driver on ring 0 use gpu addr 0x0000000010000000 and cpu addr 0xffff88003685f000
[ 0.904329] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 0.904331] [drm] Driver supports precise vblank timestamp query.
[ 0.904333] radeon 0000:40:00.0: radeon: MSI limited to 32-bit
[ 0.904360] [drm] radeon: irq initialized.
[ 0.904372] [drm] Loading R500 Microcode
[ 0.904860] [drm] radeon: ring at 0x0000000010001000
[ 0.904893] [drm] ring test succeeded in 7 usecs
[ 0.905439] [drm] ib test succeeded in 0 usecs
[ 0.906003] [drm] Radeon Display Connectors
[ 0.906006] [drm] Connector 0:
[ 0.906008] [drm] DVI-I-1
[ 0.906010] [drm] HPD1
[ 0.906012] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[ 0.906014] [drm] Encoders:
[ 0.906016] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 0.906017] [drm] DFP1: INTERNAL_KLDSCP_TMDS1
[ 0.906019] [drm] Connector 1:
[ 0.906020] [drm] DVI-I-2
[ 0.906022] [drm] HPD2
[ 0.906024] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[ 0.906025] [drm] Encoders:
[ 0.906027] [drm] CRT2: INTERNAL_KLDSCP_DAC2
[ 0.906028] [drm] DFP3: INTERNAL_LVTM1
[ 0.959041] [drm] fb mappable at 0xD00C0000
[ 0.959043] [drm] vram apper at 0xD0000000
[ 0.959045] [drm] size 5242880
[ 0.959047] [drm] fb depth is 24
[ 0.959048] [drm] pitch is 5120
[ 0.959157] fbcon: radeondrmfb (fb0) is primary device
[ 0.983478] Console: switching to colour frame buffer device 160x64
[ 0.987181] radeon 0000:40:00.0: fb0: radeondrmfb frame buffer device
[ 0.987184] radeon 0000:40:00.0: registered panic notifier
[ 1.010042] [drm] Initialized radeon 2.42.0 20080528 for 0000:40:00.0 on minor 0
[ 1.057304] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
[ 1.060482] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.060570] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.061576] Fusion MPT base driver 3.04.20
[ 1.061579] Copyright (c) 1999-2008 LSI Corporation
[ 1.063478] SCSI subsystem initialized
[ 1.064906] Fusion MPT SAS Host driver 3.04.20
[ 1.065751] mptbase: ioc0: Initiating bringup
[ 1.068206] ACPI: bus type USB registered
[ 1.068247] usbcore: registered new interface driver usbfs
[ 1.068263] usbcore: registered new interface driver hub
[ 1.068344] usbcore: registered new device driver usb
[ 1.068934] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.069441] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.069542] ehci-pci: EHCI PCI platform driver
[ 1.069790] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.069803] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 1.069813] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 1.069836] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00003000
[ 1.070177] hub 1-0:1.0: USB hub found
[ 1.070191] hub 1-0:1.0: 2 ports detected
[ 1.070671] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.070686] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 1.070697] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 1.070735] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00003020
[ 1.070994] hub 2-0:1.0: USB hub found
[ 1.071007] hub 2-0:1.0: 2 ports detected
[ 1.071464] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.071473] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 1.071481] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 1.071518] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00003040
[ 1.071757] hub 3-0:1.0: USB hub found
[ 1.071769] hub 3-0:1.0: 2 ports detected
[ 1.072037] FDC 0 is a post-1991 82077
[ 1.072500] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 1.072510] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 4
[ 1.072525] ehci-pci 0000:00:1d.7: debug port 1
[ 1.075693] libata version 3.00 loaded.
[ 1.076439] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[ 1.076451] ehci-pci 0000:00:1d.7: irq 16, io mem 0xf0e04000
[ 1.083359] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.083608] hub 4-0:1.0: USB hub found
[ 1.083619] hub 4-0:1.0: 8 ports detected
[ 1.106751] hub 1-0:1.0: USB hub found
[ 1.106764] hub 1-0:1.0: 2 ports detected
[ 1.114861] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.123388] firewire_ohci 0000:01:05.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
[ 1.130097] hub 2-0:1.0: USB hub found
[ 1.130109] hub 2-0:1.0: 2 ports detected
[ 1.153408] hub 3-0:1.0: USB hub found
[ 1.153418] hub 3-0:1.0: 2 ports detected
[ 1.153551] ata_piix 0000:00:1f.1: version 2.13
[ 1.154412] scsi host0: ata_piix
[ 1.154582] scsi host1: ata_piix
[ 1.154656] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x30c0 irq 14
[ 1.154659] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x30c8 irq 15
[ 1.154825] ata2: port disabled--ignoring
[ 1.154943] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 1.154954] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 1.154962] uhci_hcd 0000:00:1d.3: detected 2 ports
[ 1.154991] uhci_hcd 0000:00:1d.3: irq 23, io base 0x00003060
[ 1.155233] hub 5-0:1.0: USB hub found
[ 1.155243] hub 5-0:1.0: 2 ports detected
[ 1.155421] ahci 0000:00:1f.2: version 3.0
[ 1.155866] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl RAID mode
[ 1.155871] ahci 0000:00:1f.2: flags: 64bit ncq pm led slum part
[ 1.157217] scsi host2: ahci
[ 1.157389] scsi host3: ahci
[ 1.157549] scsi host4: ahci
[ 1.157707] scsi host5: ahci
[ 1.157866] scsi host6: ahci
[ 1.158029] scsi host7: ahci
[ 1.158109] ata3: SATA max UDMA/133 abar m1024@0xf0e04400 port 0xf0e04500 irq 19
[ 1.158112] ata4: SATA max UDMA/133 abar m1024@0xf0e04400 port 0xf0e04580 irq 19
[ 1.158115] ata5: SATA max UDMA/133 abar m1024@0xf0e04400 port 0xf0e04600 irq 19
[ 1.158117] ata6: SATA max UDMA/133 abar m1024@0xf0e04400 port 0xf0e04680 irq 19
[ 1.158120] ata7: SATA max UDMA/133 abar m1024@0xf0e04400 port 0xf0e04700 irq 19
[ 1.158122] ata8: SATA max UDMA/133 abar m1024@0xf0e04400 port 0xf0e04780 irq 19
[ 1.390018] usb 4-8: new high-speed USB device number 2 using ehci-pci
[ 1.476696] ata7: SATA link down (SStatus 0 SControl 300)
[ 1.476722] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.476746] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.476772] ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.476798] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.479361] ata8.00: ATAPI: TSSTcorpCD/DVDW SH-S183L, SB01, max UDMA/33
[ 1.479365] ata8.00: applying bridge limits
[ 1.482656] ata8.00: configured for UDMA/33
[ 1.536366] usb-storage 4-8:1.0: USB Mass Storage device detected
[ 1.536513] scsi host8: usb-storage 4-8:1.0
[ 1.536627] usbcore: registered new interface driver usb-storage
[ 1.618889] ata4.00: ATA-8: TOSHIBA MD04ACA500, FP2A, max UDMA/100
[ 1.618893] ata4.00: 9767541168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.619850] ata4.00: configured for UDMA/100
[ 1.623459] firewire_core 0000:01:05.0: created device fw0: GUID 0060b0000023d802, S400
[ 1.623732] ata6.00: ATA-8: TOSHIBA MD04ACA500, FP2A, max UDMA/100
[ 1.623736] ata6.00: 9767541168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.624083] ata5.00: ATA-8: TOSHIBA MD04ACA500, FP2A, max UDMA/100
[ 1.624087] ata5.00: 9767541168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.624679] ata6.00: configured for UDMA/100
[ 1.625026] ata5.00: configured for UDMA/100
[ 1.636694] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.670013] ioc0: LSISAS1064 A4: Capabilities={Initiator}
[ 1.764594] ata3.00: ATA-8: TOSHIBA MD04ACA500, FP2A, max UDMA/100
[ 1.764599] ata3.00: 9767541168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.765534] ata3.00: configured for UDMA/100
[ 1.765665] scsi 2:0:0:0: Direct-Access ATA TOSHIBA MD04ACA5 FP2A PQ: 0 ANSI: 5
[ 1.765977] scsi 3:0:0:0: Direct-Access ATA TOSHIBA MD04ACA5 FP2A PQ: 0 ANSI: 5
[ 1.766229] scsi 4:0:0:0: Direct-Access ATA TOSHIBA MD04ACA5 FP2A PQ: 0 ANSI: 5
[ 1.766479] scsi 5:0:0:0: Direct-Access ATA TOSHIBA MD04ACA5 FP2A PQ: 0 ANSI: 5
[ 1.767538] scsi 7:0:0:0: CD-ROM TSSTcorp CD/DVDW SH-S183L SB01 PQ: 0 ANSI: 5
[ 1.782385] sd 2:0:0:0: [sda] 9767541168 512-byte logical blocks: (5.00 TB/4.54 TiB)
[ 1.782391] sd 2:0:0:0: [sda] 4096-byte physical blocks
[ 1.782444] sd 3:0:0:0: [sdb] 9767541168 512-byte logical blocks: (5.00 TB/4.54 TiB)
[ 1.782450] sd 3:0:0:0: [sdb] 4096-byte physical blocks
[ 1.782519] sd 4:0:0:0: [sdc] 9767541168 512-byte logical blocks: (5.00 TB/4.54 TiB)
[ 1.782522] sd 4:0:0:0: [sdc] 4096-byte physical blocks
[ 1.782526] sd 3:0:0:0: [sdb] Write Protect is off
[ 1.782531] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.782562] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.782589] sd 4:0:0:0: [sdc] Write Protect is off
[ 1.782593] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 1.782633] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.782673] sd 5:0:0:0: [sdd] 9767541168 512-byte logical blocks: (5.00 TB/4.54 TiB)
[ 1.782680] sd 5:0:0:0: [sdd] 4096-byte physical blocks
[ 1.782764] sd 2:0:0:0: [sda] Write Protect is off
[ 1.782774] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.782795] sd 5:0:0:0: [sdd] Write Protect is off
[ 1.782800] sd 5:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 1.782814] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.782834] sd 5:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.783368] tsc: Refined TSC clocksource calibration: 1994.999 MHz
[ 1.783376] clocksource tsc: mask: 0xffffffffffffffff max_cycles: 0x398374a7fb8, max_idle_ns: 881590820223 ns
[ 1.789393] sr 7:0:0:0: [sr0] scsi3-mmc drive: 94x/94x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.789398] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.789615] sr 7:0:0:0: Attached scsi CD-ROM sr0
[ 2.024852] sdb: sdb1 sdb2
[ 2.025315] sda: sda1 sda2
[ 2.025387] sd 3:0:0:0: [sdb] Attached SCSI disk
[ 2.025839] sd 2:0:0:0: [sda] Attached SCSI disk
[ 2.031056] sdc: sdc1 sdc2
[ 2.031537] sd 4:0:0:0: [sdc] Attached SCSI disk
[ 2.032728] sdd: sdd1
[ 2.033089] sd 5:0:0:0: [sdd] Attached SCSI disk
[ 2.215076] device-mapper: uevent: version 1.0.3
[ 2.215246] device-mapper: ioctl: 4.31.0-ioctl (2015-3-12) initialised: dm-devel@redhat.com
[ 2.276202] random: nonblocking pool is initialized
[ 2.296526] md: bind<dm-0>
[ 2.363366] raid6: sse2x1 gen() 3145 MB/s
[ 2.420033] raid6: sse2x1 xor() 3314 MB/s
[ 2.433594] md: bind<dm-3>
[ 2.476677] raid6: sse2x2 gen() 5409 MB/s
[ 2.533347] raid6: sse2x2 xor() 4142 MB/s
[ 2.538294] scsi 8:0:0:0: Direct-Access Generic STORAGE DEVICE 1.02 PQ: 0 ANSI: 0
[ 2.590037] raid6: sse2x4 gen() 6114 MB/s
[ 2.646698] raid6: sse2x4 xor() 4705 MB/s
[ 2.646702] raid6: using algorithm sse2x4 gen() 6114 MB/s
[ 2.646704] raid6: .... xor() 4705 MB/s, rmw enabled
[ 2.646706] raid6: using ssse3x2 recovery algorithm
[ 2.647159] xor: measuring software checksum speed
[ 2.680007] prefetch64-sse: 7785.600 MB/sec
[ 2.688778] md: bind<dm-6>
[ 2.690751] md: raid1 personality registered for level 1
[ 2.691135] md/raid1:md0: active with 3 out of 3 mirrors
[ 2.691174] md0: detected capacity change from 0 to 17163091968
[ 2.713373] generic_sse: 6918.000 MB/sec
[ 2.713378] xor: using function: prefetch64-sse (7785.600 MB/sec)
[ 2.772849] Btrfs loaded
[ 2.773571] BTRFS: device fsid 958fc735-c6e6-4272-93f1-0706d16e5f3d devid 1 transid 24010 /dev/dm-1
[ 2.780151] BTRFS: device fsid 5563e198-92c1-4acc-a7e1-8a4b2f76d271 devid 1 transid 8 /dev/dm-2
[ 2.780379] BTRFS: device fsid 958fc735-c6e6-4272-93f1-0706d16e5f3d devid 3 transid 24010 /dev/dm-4
[ 2.780543] BTRFS: device fsid 958fc735-c6e6-4272-93f1-0706d16e5f3d devid 2 transid 24010 /dev/dm-7
[ 2.783538] Switched to clocksource tsc
[ 2.803898] sd 8:0:0:0: [sde] 512000 512-byte logical blocks: (262 MB/250 MiB)
[ 2.913347] usb 4-8: reset high-speed USB device number 2 using ehci-pci
[ 3.423345] usb 4-8: reset high-speed USB device number 2 using ehci-pci
[ 3.933344] usb 4-8: reset high-speed USB device number 2 using ehci-pci
[ 4.443346] usb 4-8: reset high-speed USB device number 2 using ehci-pci
[ 4.953349] usb 4-8: reset high-speed USB device number 2 using ehci-pci
[ 5.463347] usb 4-8: reset high-speed USB device number 2 using ehci-pci
[ 5.593532] sd 8:0:0:0: [sde] Write Protect is off
[ 5.593537] sd 8:0:0:0: [sde] Mode Sense: 02 00 00 00
[ 5.970011] usb 4-8: reset high-speed USB device number 2 using ehci-pci
[ 6.480015] usb 4-8: reset high-speed USB device number 2 using ehci-pci
[ 6.990012] usb 4-8: reset high-speed USB device number 2 using ehci-pci
[ 7.047734] scsi host9: ioc0: LSISAS1064 A4, FwRev=01100000h, Ports=1, MaxQ=511, IRQ=25
[ 7.100381] BTRFS info (device dm-7): disk space caching is enabled
[ 7.100386] BTRFS: has skinny extents
[ 7.500020] usb 4-8: reset high-speed USB device number 2 using ehci-pci
[ 7.524656] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 7.524695] systemd[1]: Inserted module 'ip_tables'
[ 7.527117] systemd[1]: systemd 224 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD +IDN)
[ 7.527379] systemd[1]: Detected architecture x86-64.
[ 7.528194] systemd[1]: Set hostname to <terra>.
[ 7.691604] systemd[1]: display-manager.service: Cannot add dependency job, ignoring: Unit display-manager.service failed to load: No such file or directory.
[ 7.692193] systemd[1]: Reached target Host and Network Name Lookups.
[ 7.692400] systemd[1]: Reached target RPC Port Mapper.
[ 7.692554] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 7.692702] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 7.692979] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 7.693104] systemd[1]: Reached target Paths.
[ 7.693198] systemd[1]: Reached target Remote File Systems.
[ 7.693295] systemd[1]: Reached target Encrypted Volumes.
[ 7.693696] systemd[1]: Created slice Root Slice.
[ 7.693931] systemd[1]: Created slice System Slice.
[ 7.694169] systemd[1]: Created slice system-getty.slice.
[ 7.716621] systemd[1]: Listening on udev Kernel Socket.
[ 7.716990] systemd[1]: Created slice User and Session Slice.
[ 7.717099] systemd[1]: Reached target Slices.
[ 7.717239] systemd[1]: Listening on Journal Socket (/dev/log).
[ 7.717373] systemd[1]: Listening on udev Control Socket.
[ 7.717517] systemd[1]: Listening on Journal Socket.
[ 7.718924] systemd[1]: Mounting Temporary Directory...
[ 7.719725] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 7.720747] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 7.721567] systemd[1]: Mounting NFSD configuration filesystem...
[ 7.722535] systemd[1]: Mounting Debug File System...
[ 7.723502] systemd[1]: Starting Setup Virtual Console...
[ 7.724458] systemd[1]: Mounting POSIX Message Queue File System...
[ 7.725364] systemd[1]: Starting Journal Service...
[ 7.726231] systemd[1]: Starting Initialize the iWARP/InfiniBand/RDMA stack in the kernel...
[ 7.727322] systemd[1]: Starting Load Kernel Modules...
[ 7.728495] systemd[1]: Mounting RPC Pipe File System...
[ 7.729539] systemd[1]: Mounting Huge Pages File System...
[ 7.729793] systemd[1]: Listening on networkd rtnetlink socket.
[ 7.729987] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 7.730165] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 7.730325] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 7.731716] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 7.766063] FS-Cache: Loaded
[ 7.783350] RPC: Registered named UNIX socket transport module.
[ 7.783355] RPC: Registered udp transport module.
[ 7.783357] RPC: Registered tcp transport module.
[ 7.783359] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 7.793705] FS-Cache: Netfs 'nfs' registered for caching
[ 7.795049] systemd[1]: Started Load Kernel Modules.
[ 7.796069] systemd[1]: Mounting Configuration File System...
[ 7.796907] systemd[1]: Starting Apply Kernel Variables...
[ 7.817763] systemd[1]: Started Setup Virtual Console.
[ 7.818133] systemd[1]: Mounted Debug File System.
[ 7.818405] systemd[1]: Mounted RPC Pipe File System.
[ 7.828530] systemd[1]: Mounted Configuration File System.
[ 7.828687] systemd[1]: Mounted POSIX Message Queue File System.
[ 7.828799] systemd[1]: Mounted Huge Pages File System.
[ 7.828908] systemd[1]: Mounted Temporary Directory.
[ 7.858411] systemd[1]: Started Apply Kernel Variables.
[ 7.867359] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 7.868844] systemd[1]: Mounted NFSD configuration filesystem.
[ 8.010019] usb 4-8: reset high-speed USB device number 2 using ehci-pci
[ 8.068852] BTRFS info (device dm-7): disk space caching is enabled
[ 8.069838] systemd[1]: Started Remount Root and Kernel File Systems.
[ 8.070995] systemd[1]: Starting udev Coldplug all Devices...
[ 8.071802] systemd[1]: Starting Load/Save Random Seed...
[ 8.072762] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 8.102582] systemd[1]: Started Load/Save Random Seed.
[ 8.168642] systemd[1]: Started udev Coldplug all Devices.
[ 8.290396] systemd[1]: Started Create Static Device Nodes in /dev.
[ 8.292943] systemd[1]: Reached target Local File Systems (Pre).
[ 8.295119] systemd[1]: Starting udev Kernel Device Manager...
[ 8.520020] usb 4-8: reset high-speed USB device number 2 using ehci-pci
[ 8.650159] sd 8:0:0:0: [sde] No Caching mode page found
[ 8.651399] sd 8:0:0:0: [sde] Assuming drive cache: write through
[ 8.946196] systemd[1]: Started udev Kernel Device Manager.
[ 9.030026] usb 4-8: reset high-speed USB device number 2 using ehci-pci
[ 9.050868] snd_hda_codec_realtek hdaudioC0D0: ALC262: SKU not ready 0x411111f0
[ 9.051406] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC262: line_outs=1 (0x15/0x0/0x0/0x0/0x0) type:line
[ 9.051410] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=1 (0x16/0x0/0x0/0x0/0x0)
[ 9.051414] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 9.051416] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 9.051419] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 9.051422] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
[ 9.051425] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
[ 9.051428] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
[ 9.051431] snd_hda_codec_realtek hdaudioC0D0: CD=0x1c
[ 9.051434] snd_hda_codec_realtek hdaudioC0D0: Aux=0x14
[ 9.069296] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input2
[ 9.069550] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input3
[ 9.069603] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input4
[ 9.069654] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
[ 9.069704] input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[ 9.069754] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 9.430786] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 9.540022] usb 4-8: reset high-speed USB device number 2 using ehci-pci
[ 9.611318] intel_rng: Firmware space is locked read-only. If you can't or
intel_rng: don't want to disable this in firmware setup, and if
intel_rng: you are certain that your system has a functional
intel_rng: RNG, try using the 'no_fwh_detect' option.
[ 9.620937] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input8
[ 9.620946] ACPI: Power Button [PBTN]
[ 9.621025] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input9
[ 9.621028] ACPI: Power Button [PWRF]
[ 9.659584] wmi: Mapper loaded
[ 9.664236] mlx4_core: Mellanox ConnectX core driver v2.2-1 (Feb, 2014)
[ 9.664273] mlx4_core: Initializing 0000:60:00.0
[ 9.664411] parport_pc 00:03: reported by Plug and Play ACPI
[ 9.664460] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
[ 9.669387] input: PC Speaker as /devices/platform/pcspkr/input/input10
[ 9.709845] EDAC MC: Ver: 3.0.0
[ 9.713965] ACPI Warning: SystemIO range 0x000000000000F828-0x000000000000F82F conflicts with OpRegion 0x000000000000F800-0x000000000000F84F (\_SB_.PCI0.LPC_.PMIO) (20150410/utaddress-254)
[ 9.713976] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 9.714017] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 9.720415] usbcore: registered new interface driver uas
[ 9.720925] EDAC MC0: Giving out device to module i5000_edac.c controller I5000: DEV 0000:00:10.0 (POLLED)
[ 9.720949] EDAC PCI0: Giving out device to module i5000_edac controller EDAC PCI controller: DEV 0000:00:10.0 (POLLED)
[ 9.727500] pps_core: LinuxPPS API ver. 1 registered
[ 9.727505] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 9.728362] PTP clock support registered
[ 9.812030] coretemp coretemp.0: Using relative temperature scale!
[ 9.812114] coretemp coretemp.1: Using relative temperature scale!
[ 9.812136] coretemp coretemp.0: Using relative temperature scale!
[ 9.812154] coretemp coretemp.1: Using relative temperature scale!
[ 9.812174] coretemp coretemp.0: Using relative temperature scale!
[ 9.812188] coretemp coretemp.1: Using relative temperature scale!
[ 9.812207] coretemp coretemp.0: Using relative temperature scale!
[ 9.812228] coretemp coretemp.1: Using relative temperature scale!
[ 9.817779] systemd[1]: Reached target Sound Card.
[ 9.900074] systemd[1]: Created slice system-lvm2\x2dpvscan.slice.
[ 9.902218] systemd[1]: Starting LVM2 PV scan on device 8:2...
[ 9.904456] systemd[1]: Starting LVM2 PV scan on device 8:18...
[ 9.961628] systemd[1]: Started LVM2 metadata daemon.
[ 9.971035] systemd[1]: Found device /dev/disk1/terra1.
[ 9.973156] systemd[1]: Mounting /terra...
[ 9.975547] systemd[1]: Mounting /persistent...
[ 9.991769] tg3.c:v3.137 (May 11, 2014)
[ 10.018648] iTCO_vendor_support: vendor-support=0
[ 10.029576] tg3 0000:1f:00.0 eth0: Tigon3 [partno(BCM95752) rev 6001] (PCI Express) MAC address 00:1c:c4:17:8f:02
[ 10.029583] tg3 0000:1f:00.0 eth0: attached PHY is 5752 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[ 10.029586] tg3 0000:1f:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 10.029590] tg3 0000:1f:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 10.034441] tg3 0000:1f:00.0 enp31s0: renamed from eth0
[ 10.034999] systemd[1]: Mounted /terra.
[ 10.050148] usb 4-8: reset high-speed USB device number 2 using ehci-pci
[ 10.050642] input: HP WMI hotkeys as /devices/virtual/input/input12
[ 10.058489] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 10.058557] iTCO_wdt: Found a 631xESB/632xESB TCO device (Version=2, TCOBASE=0xf860)
[ 10.058781] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 10.066995] ppdev: user-space parallel port driver
[ 10.124333] gpio_ich: ACPI BAR is unavailable, GPI 0 - 15 unavailable
[ 10.124471] gpio_ich: GPIO from 462 to 511 on gpio_ich
[ 10.407472] systemd[1]: Mounting /terra/persistent/.snapshots...
[ 10.409756] systemd[1]: Mounting /terra/default...
[ 10.414653] systemd[1]: Found device /dev/md0.
[ 10.417680] systemd[1]: Starting MD array monitor...
[ 10.419625] systemd[1]: Activating swap /dev/md0...
[ 10.427097] systemd[1]: Started MD array monitor.
[ 10.429937] systemd[1]: mdmonitor.service: Main process exited, code=exited, status=1/FAILURE
[ 10.430486] systemd[1]: mdmonitor.service: Unit entered failed state.
[ 10.430494] systemd[1]: mdmonitor.service: Failed with result 'exit-code'.
[ 10.437174] Adding 16760828k swap on /dev/md0. Priority:-1 extents:1 across:16760828k FS
[ 10.438651] systemd[1]: Activated swap /dev/md0.
[ 10.441339] systemd[1]: Reached target Swap.
[ 10.465220] systemd[1]: Mounted /terra/default.
[ 10.466560] systemd[1]: Mounted /persistent.
[ 10.467869] systemd[1]: Mounted /terra/persistent/.snapshots.
[ 10.474977] systemd[1]: Mounting /terra/default/.snapshots...
[ 10.538205] systemd[1]: Mounted /terra/default/.snapshots.
[ 10.540882] systemd[1]: Reached target Local File Systems.
[ 10.560023] usb 4-8: reset high-speed USB device number 2 using ehci-pci
[ 11.055666] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input11
[ 11.057706] mousedev: PS/2 mouse device common for all mice
[ 11.070019] usb 4-8: reset high-speed USB device number 2 using ehci-pci
[ 11.141971] systemd[1]: Starting LVM2 PV scan on device 8:34...
[ 11.245613] systemd[1]: Started Journal Service.
[ 11.262410] systemd-journald[344]: Received request to flush runtime journal from PID 1
[ 11.580023] usb 4-8: reset high-speed USB device number 2 using ehci-pci
[ 11.865688] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[ 11.869018] IPv6: ADDRCONF(NETDEV_UP): br0: link is not ready
[ 11.869597] device enp31s0 entered promiscuous mode
[ 11.905502] IPv6: ADDRCONF(NETDEV_UP): enp31s0: link is not ready
[ 11.967162] mlx4_core 0000:60:00.0: PCIe BW is different than device's capability
[ 11.967170] mlx4_core 0000:60:00.0: PCIe link speed is 2.5GT/s, device supports 2.5GT/s
[ 11.967174] mlx4_core 0000:60:00.0: PCIe link width is x4, device supports x8
[ 12.086704] usb 4-8: reset high-speed USB device number 2 using ehci-pci
[ 12.106985] <mlx4_ib> mlx4_ib_add: mlx4_ib: Mellanox ConnectX InfiniBand driver v2.2-1 (Feb 2014)
[ 12.596683] usb 4-8: reset high-speed USB device number 2 using ehci-pci
[ 13.106679] usb 4-8: reset high-speed USB device number 2 using ehci-pci
[ 13.616678] usb 4-8: reset high-speed USB device number 2 using ehci-pci
[ 14.126680] usb 4-8: reset high-speed USB device number 2 using ehci-pci
[ 14.615249] IPv6: ADDRCONF(NETDEV_UP): ib0: link is not ready
[ 14.636701] usb 4-8: reset high-speed USB device number 2 using ehci-pci
[ 14.640500] Rounding down aligned max_sectors from 4294967295 to 4294967288
[ 14.762771] ib0: enabling connected mode will cause multicast packet drops
[ 14.796017] ib0: mtu > 4092 will cause multicast packet drops.
[ 14.864201] IPv6: ADDRCONF(NETDEV_CHANGE): ib0: link becomes ready
[ 14.870495] ib0: sendonly multicast join failed for ff12:601b:ffff:0000:0000:0000:0000:0016, status -22
[ 14.870510] ib0: sendonly multicast join failed for ff12:401b:ffff:0000:0000:0000:0000:0016, status -22
[ 14.991714] NFSD: starting 90-second grace period (net ffffffff818a9100)
[ 15.034936] sde: sde1
[ 15.413348] usb 4-8: reset high-speed USB device number 2 using ehci-pci
[ 15.796879] tg3 0000:1f:00.0 enp31s0: Link is up at 1000 Mbps, full duplex
[ 15.796888] tg3 0000:1f:00.0 enp31s0: Flow control is on for TX and on for RX
[ 15.796908] IPv6: ADDRCONF(NETDEV_CHANGE): enp31s0: link becomes ready
[ 15.796954] br0: port 1(enp31s0) entered forwarding state
[ 15.796978] br0: port 1(enp31s0) entered forwarding state
[ 15.797021] IPv6: ADDRCONF(NETDEV_CHANGE): br0: link becomes ready
[ 15.923350] usb 4-8: reset high-speed USB device number 2 using ehci-pci
[ 15.934012] ib0: sendonly multicast join failed for ff12:601b:ffff:0000:0000:0000:0000:0002, status -22
[ 16.433346] usb 4-8: reset high-speed USB device number 2 using ehci-pci
[ 16.870330] ib0: sendonly multicast join failed for ff12:601b:ffff:0000:0000:0000:0000:0016, status -22
[ 16.870353] ib0: sendonly multicast join failed for ff12:401b:ffff:0000:0000:0000:0000:0016, status -22
[ 16.943349] usb 4-8: reset high-speed USB device number 2 using ehci-pci
[ 17.453345] usb 4-8: reset high-speed USB device number 2 using ehci-pci
[ 17.937036] ib0: sendonly multicast join failed for ff12:601b:ffff:0000:0000:0000:0000:0002, status -22
[ 17.963348] usb 4-8: reset high-speed USB device number 2 using ehci-pci
[ 18.733359] usb 4-8: reset high-speed USB device number 2 using ehci-pci
[ 19.243347] usb 4-8: reset high-speed USB device number 2 using ehci-pci
[ 19.753348] usb 4-8: reset high-speed USB device number 2 using ehci-pci
[ 19.943766] ib0: sendonly multicast join failed for ff12:601b:ffff:0000:0000:0000:0000:0002, status -22
[ 20.263346] usb 4-8: reset high-speed USB device number 2 using ehci-pci
[ 20.773350] usb 4-8: reset high-speed USB device number 2 using ehci-pci
[ 21.283345] usb 4-8: reset high-speed USB device number 2 using ehci-pci
[ 21.413553] sd 8:0:0:0: [sde] Attached SCSI removable disk
[ 21.950349] ib0: sendonly multicast join failed for ff12:601b:ffff:0000:0000:0000:0000:0002, status -22
[ 23.957080] ib0: sendonly multicast join failed for ff12:601b:ffff:0000:0000:0000:0000:0002, status -22
[ 25.963763] ib0: sendonly multicast join failed for ff12:601b:ffff:0000:0000:0000:0000:0002, status -22
[ 25.972325] tun: Universal TUN/TAP device driver, 1.6
[ 25.972332] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 26.036835] device vnet0 entered promiscuous mode
[ 26.063478] br0: port 2(vnet0) entered forwarding state
[ 26.063487] br0: port 2(vnet0) entered forwarding state
[ 26.439466] qemu-system-x86: sending ioctl 5326 to a partition!
[ 26.439483] qemu-system-x86: sending ioctl 80200204 to a partition!
[ 26.447722] qemu-system-x86: sending ioctl 5326 to a partition!
[ 26.447734] qemu-system-x86: sending ioctl 80200204 to a partition!
[ 26.452373] qemu-system-x86: sending ioctl 5326 to a partition!
[ 26.452384] qemu-system-x86: sending ioctl 80200204 to a partition!
[ 27.256718] kvm: zapping shadow pages for mmio generation wraparound
[ 30.851958] br0: port 1(enp31s0) entered forwarding state
[ 41.117999] br0: port 2(vnet0) entered forwarding state