Something

System
-----------------------
K3b Version: 0.12.17

KDE Version: 3.5.5
QT Version:  3.3.6
Kernel:      2.6.17-10-generic
Devices
-----------------------
HL-DT-ST DVDRAM GSA-T10N PP02 (/dev/scd0, /dev/sg1) at /media/cdrom0 [CD-R; CD-RW; CD-ROM; DVD-ROM; DVD-RAM; DVD-R; DVD-RW; DVD-R DL; DVD+R; DVD+RW; DVD+R DL] [DVD-ROM; DVD-R séquentiel; DVD-R double couche séquentiel; DVD+R double couche à saut; DVD-RAM; DVD RW à réinscription limitée; DVD-RW séquentiel; DVD+RW; DVD+R; DVD+R double couche; CD-ROM; CD-R; CD-RW] [SAO; TAO; RAW; SAO/R96P; SAO/R96R; RAW/R16; RAW/R96P; RAW/R96R; Réinscription restreinte; Saut de couche]

Used versions
-----------------------
cdrecord: 2.1.1a03

cdrecord
-----------------------
/usr/X11R6/bin/cdrecord: Warning: Running on Linux-2.6.17-10-generic
/usr/X11R6/bin/cdrecord: There are unsettled issues with Linux-2.5 and newer.
/usr/X11R6/bin/cdrecord: If you have unexpected problems, please try Linux-2.4 or Solaris.
scsidev: '1,0,0'
scsibus: 1 target: 0 lun: 0
Linux sg driver version: 3.5.33
/usr/X11R6/bin/cdrecord: Warning: using inofficial version of libscg (debian-0.8debian2 '@(#)scsitransp.c 1.91 04/06/17 Copyright 1988,1995,2000-2004 J. Schilling').
SCSI buffer size: 64512
/usr/X11R6/bin/cdrecord: This version of cdrecord does not include DVD-R/DVD-RW support code.
/usr/X11R6/bin/cdrecord: See /usr/share/doc/cdrecord/README.DVD.Debian for details on DVD support.
Cdrecord-Clone 2.01.01a03 (i686-pc-linux-gnu) Copyright (C) 1995-2005 Joerg Schilling
NOTE: this version of cdrecord is an inofficial (modified) release of cdrecord
      and thus may have bugs that are not present in the original version.
      Please send bug reports and support requests to <cdrtools@packages.debian.org>.
      The original author should not be bothered with problems of this version.
TOC Type: 1 = CD-ROM
Using libscg version 'debian-0.8debian2'.
Driveropts: 'burnfree'
atapi: 1
Device type    : Removable CD-ROM
Version        : 5
Response Format: 2
Capabilities   : 
Vendor_info    : 'HL-DT-ST'
Identifikation : 'DVDRAM GSA-T10N '
Revision       : 'PP02'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x000A
Profile: 0x0012 
Profile: 0x0011 
Profile: 0x0015 
Profile: 0x0016 
Profile: 0x0014 
Profile: 0x0013 
Profile: 0x001A 
Profile: 0x001B 
Profile: 0x002B 
Profile: 0x0010 
Profile: 0x0009 
Profile: 0x000A (current)
Profile: 0x0008 
Profile: 0x0002 
Using generic SCSI-3/mmc   CD-R/CD-RW driver (mmc_cdr).
Driver flags   : MMC-3 SWABAUDIO BURNFREE 
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1053696 = 1029 KB
Drive DMA Speed: 13384 kB/s 76x CD 9x DVD
FIFO size      : 4194304 = 4096 KB
Track 01: data   657 MB        
Total size:      755 MB (74:51.29) = 336847 sectors
Lout start:      755 MB (74:53/22) = 336847 sectors
Current Secsize: 2048
ATIP info from disk:
  Indicated writing power: 5
  Reference speed: 2
  Is not unrestricted
  Is erasable
  ATIP start of lead in:  -11635 (97:26/65)
  ATIP start of lead out: 337350 (75:00/00)
  1T speed low:  0 (reserved val  0) 1T speed high:  4
  2T speed low:  8 2T speed high:  0 (reserved val 10)
  power mult factor: 4 6
  recommended erase/write power: 3
  A1 values: 02 4C B0
  A2 values: 4A C8 06
Disk type:    Phase change
Manuf. index: 3
Manufacturer: CMC Magnetics Corporation
Blocks total: 337350 Blocks current: 337350 Blocks remaining: 503
Starting to write CD/DVD at speed 4 in real SAO mode for single session.
Last chance to quit, starting real write in 3 seconds.
   2 seconds.
   1 seconds.
   0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
BURN-Free is OFF.
Turning BURN-Free on
Performing OPC...
Sending CUE sheet...
/usr/X11R6/bin/cdrecord: WARNING: Drive returns wrong startsec (0) using -150
/usr/X11R6/bin/cdrecord: Input/output error. write_g1: scsi sendcmd: no error
CDB:  2A 00 FF FF FF 6A 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 10 2A 00 00 90 30 05 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x30 Qual 0x05 (cannot write medium - incompatible format) Fru 0x0
Sense flags: Blk 0 (not valid) 
resid: 63488
cmd finished after 0.016s timeout 200s
Writing pregap for track 1 at -150
write track pad data: error after 0 bytes
BFree: 1029 K BSize: 1029 K
Starting new track at sector: 0
Track 01:    0 of  657 MB written.
/usr/X11R6/bin/cdrecord: Input/output error. write_g1: scsi sendcmd: no error
CDB:  2A 00 00 00 00 00 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 10 2A 00 00 90 30 05 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x30 Qual 0x05 (cannot write medium - incompatible format) Fru 0x0
Sense flags: Blk 0 (not valid) 
resid: 63488
cmd finished after 0.016s timeout 200s
/usr/X11R6/bin/cdrecord: A write error occured.
/usr/X11R6/bin/cdrecord: Please properly read the error message above.
write track data: error after 0 bytes
Writing  time:   71.156s
Average write speed  63.2x.
Fixating...
Fixating time:    0.004s
/usr/X11R6/bin/cdrecord: fifo had 64 puts and 1 gets.
/usr/X11R6/bin/cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.

cdrecord command:
-----------------------
/usr/X11R6/bin/cdrecord.mmap -v gracetime=2 dev=1,0,0 speed=4 -dao driveropts=burnfree -eject -data /home/sputnick/Desktop/backtrack-v.1.0-260506.iso